| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*.
Most of these are LLM fixes for old issues flagged by sashiko/LLMs.
Many of these trigger drive-by-findings in sashiko. In particular:
- many load/store tearing and missing memory barriers, races
etc. in ipset, esp. with GC and resizing.
Keeping the proposed patches spinning for yet-another-iteration
keeps legit fixes back, so I prefer to add these now and follow
up with other reports later.
- flowtable work queue still has possible races with teardown,
but same rationale as with ipset: drive-by findings, not
problems coming with the flowtable IPIP changeset in this PR.
- ever since unreadable frag skb support was added in 6.12, we can no
longer do: BUG_ON(skb_copy_bits( ...): it will fire with such skbs.
Mina Almasry is looking at similar patterns elsewhere in the stack.
1) Guard skb->mac_header adjustment after IPv6 defragmentation in
nf_conntrack_reasm. From Xiang Mei.
2) NUL-terminate ebtables table names before calling find_table_lock() to
prevent stack-out-of-bounds reads. Also from Xiang Mei.
3) Zero the ebtables chainstack array, else error unwind may free bogus
pointer when CPU mask is sparse. All three issues date from 2.6 days.
4) Ensure ebtables module names are c-strings, same bug pattern as 2).
Bug added in 4.6.
5) Fix catchall element handling for inverted lookups in nft_lookup. Fold the
catchall lookup into ext before computing the match status. Was like
this ever since catchall elements got introduced in 5.13.
From Tamaki Yanagawa.
6-9) ipset updates from Jozsef Kadlecsik:
- mark rcu protected areas correctly
- address gc and resize clash in the comment extension
- add/del backlog cleanup in the error path
- allocate right size for the generic hash structure
10-12): IPIP flowtable updates from Pablo Neira Ayuso:
- Use the current direction's route when pushing IPIP headers
Fix incorrect headroom and fragmentation offset calculations.
- Avoid hardware offload for IPIP tunnels due to lack of driver support.
- Support IPIP tunnels with direct xmit in netfilter flowtable.
dst_cache and dst_cookie are moved outside the union to share route
state across flows. This is a followup to work done in 6.19 cycle.
13) Don't BUG() on skb_copy_bits error. Handle unreadable fragments by
either returning an error or restricting the copy operations to linear area,
This became an issue when unreable frag support was merged in 6.12.
14-16): IPVS updates from Yizhou Zhao:
- Pass parsed transport offset to IPVS state handlers.
update callback signatures.
- use correct transport header offset on state lookp in TCP.
As-is it was possible for ipv6 extension header data to be
treated as L4 header.
- same for SCTP. This was also broken since 2.6 days.
17) Ensure inner IP headers in ICMP errors are in the skb headroom after
stripping outer headers. Add more checks for the length of inner headers.
This was broken since 3.7 days.
From Julian Anastasov.
netfilter pull request nf-26-07-08
* tag 'nf-26-07-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
ipvs: ensure inner headers in ICMP errors are in headroom
ipvs: use parsed transport offset in SCTP state lookup
ipvs: use parsed transport offset in TCP state lookup
ipvs: pass parsed transport offset to state handlers
netfilter: handle unreadable frags
netfilter: flowtable: support IPIP tunnel with direct xmit
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
netfilter: flowtable: use dst in this direction when pushing IPIP header
netfilter: ipset: allocate the proper memory for the generic hash structure
netfilter: ipset: cleanup the add/del backlog when resize failed
netfilter: ipset: exclude gc when resize is in progress
netfilter: ipset: mark the rcu locked areas properly
netfilter: nft_lookup: fix catchall element handling with inverted lookups
netfilter: ebtables: module names must be null-terminated
netfilter: ebtables: zero chainstack array
netfilter: ebtables: terminate table name before find_table_lock()
netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag
====================
Link: https://patch.msgid.link/20260708140309.19633-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
<linux/mdio.h> itself doesn't use any of the device id structures. The
files #including <linux/mdio.h> use a variety of them:
$ git grep -l '<linux/mdio.h>' | xargs grep --color -E '\<(acpi_device_id|amba_id|ap_device_id|apr_device_id|auxiliary_device_id|bcma_device_id|ccw_device_id|cdx_device_id|coreboot_device_id|css_device_id|dfl_device_id|dmi_(device|system)_id|eisa_device_id|fsl_mc_device_id|hda_device_id|hid_device_id|hv_vmbus_device_id|i2c_device_id|i3c_device_id|ieee1394_device_id|input_device_id|ipack_device_id|isapnp_device_id|ishtp_device_id|mcb_device_id|mdio_device_id|mei_cl_device_id|mhi_device_id|mips_cdmm_device_id|of_device_id|parisc_device_id|pci_device_id|pci_epf_device_id|pcmcia_device_id|platform_device_id|pnp_(card_)?device_id|rio_device_id|rpmsg_device_id|sdio_device_id|sdw_device_id|serio_device_id|slim_device_id|spi_device_id|spmi_device_id|ssam_device_id|ssb_device_id|tb_service_id|tee_client_device_id|typec_device_id|ulpi_device_id|usb_device_id|vchiq_device_id|virtio_device_id|wmi_device_id|x86_(cpu|device)_id|zorro_device_id|cpu_feature)\>'
...
but none of them relies on <linux/mdio.h>'s #include.
<linux/mod_devicetable.h> is a bad header mixing many different device
id structures and thus is an unfortunate dependency because if e.g.
struct wmi_device_id is modified all users of <linux/mdio.h> need to be
recompiled despite none of them using struct wmi_device_id.
So drop the unused header.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/ca270a534d0f230a939a3fb4a661808b35d6436d.1783329817.git.u.kleine-koenig@baylibre.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add Static and Dynamic Interrupt Moderation (DIM) support for
Rx and Tx.
Update queue creation procedure with new data struct with the related
settings.
Add functions to collect stat for DIM, and workers to update DIM data
and settings.
Update ethtool handler to get/set the moderation settings from a user.
To avoid detach/re-attach ops, ring DIM doorbell to change settings
at run time.
By default, adaptive-rx/tx (DIM) are enabled if supported by HW.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260702220123.815018-1-haiyangz@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
MANA allocates RX buffers from page pool fragments when frag_count is
greater than 1. In that case the buffers remain DMA mapped by page pool
and the RX completion path does not call dma_unmap_single(). As a result,
the implicit sync-for-CPU normally performed by dma_unmap_single() is
missing before the packet data is passed to the networking stack.
This breaks RX on configurations which require explicit DMA syncing, for
example when booted with swiotlb=force.
Fix this by recording the page pool page and DMA sync offset when the RX
buffer is allocated, and syncing the received packet range for CPU access
before handing the RX buffer to the stack.
Fixes: 730ff06d3f5c ("net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.")
Cc: stable@vger.kernel.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Link: https://patch.msgid.link/20260702041237.617719-3-decui@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce a 'jit_required' bitfield flag in struct bpf_prog to track
whether a BPF program strictly requires the JIT compiler to run. This
prevents a dangerous runtime fallback to the interpreter for features
that are only implemented in the JIT compiler.
Currently, bpf_prog_has_kfunc_call() is used only for kernel function
calls, replace the kfunc-specific helper with the new 'jit_required'
flag. This makes it easy to support other JIT-only BPF features, such
as inlined helpers.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Suggested-by: KaFai Wan <kafai.wan@linux.dev>
Suggested-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
The NXP IW61x series SDIO chipset identifies itself with a base card ID
(0x0204) during the initial MMC bus scan, while the specific WLAN
function reports a different ID (0x0205).
To ensure that the MMC_QUIRK_BLKSZ_FOR_BYTE_MODE quirk is correctly
inherited by all SDIO functions (including Wi-Fi), it must be attached
to the base card ID at the core level.
Add the SDIO_DEVICE_ID_NXP_IW61X_BASE definition and apply the required
fixup in the SDIO quirk table.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
|
|
efi_recover_from_page_fault() was renamed to
efi_crash_gracefully_on_page_fault(), but the comment above enum
efi_rts_ids was not updated. Use the current name.
Fixes: c46f52231e79 ("x86/{fault,efi}: Fix and rename efi_recover_from_page_fault()")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Pull in outstanding commits from 7.2/scsi-queue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In the "vCPU locked or unreachable" lockdep assertion, treat a vCPU as
unreachable if its index is invalid, i.e. if the vCPU is in the process of
being created. Until the vCPU is inserted into the array of vCPUs, the
only way to get at the vCPU is via kvm_vm_ioctl_create_vcpu(). Note, the
actual index is set _before_ adding the vCPU to the array, i.e. there's no
risk of a false negative on the lockdep assertion.
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Link: https://patch.msgid.link/20260630225619.511632-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extract nVMX's lockdep assertion that a vCPU is locked or otherwise
unreachable into a common helper, as KVM x86 is about to gain another user,
but there is nothing x86-specific about the logic, i.e. the assertion may
be useful for other architectures.
No functional change intended.
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Link: https://patch.msgid.link/20260630225619.511632-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The TLS connect path has a use-after-free: nothing pins the
upper rpc_clnt across the delayed connect_worker. xs_connect()
stores task->tk_client in sock_xprt::clnt as a raw pointer
and queues the worker; for TLS-secured transports that worker
is xs_tcp_tls_setup_socket(), which reads several fields out
of the saved pointer (cl_timeout, cl_program, cl_prog,
cl_vers, cl_cred, cl_stats) to construct the args for the
inner handshake rpc_clnt.
The xprt does not reference the rpc_clnt; the rpc_clnt
references the xprt. xs_destroy() does cancel the
connect_worker, but it runs only when the xprt's refcount
drops to zero, which cannot happen until the rpc_clnt
releases its cl_xprt reference in rpc_free_client_work().
When a TLS handshake fails fatally (for example, an mTLS
mount whose client cert does not match the server), the
connecting task is woken with -EACCES and exits, the mount
caller invokes rpc_shutdown_client(), and the upper rpc_clnt
is freed before the queued connect_worker fires.
xs_tcp_tls_setup_socket() then dereferences the freed clnt,
producing the refcount_t underflow Michael Nemanov reported.
Take a reference on the upper rpc_clnt in xs_connect() for
TLS transports via a new rpc_hold_client() helper, and drop
it in the connect_worker's exit path with rpc_release_client().
The xprt_lock_connect() / xprt_unlock_connect() pairing
already serialises xs_connect() with xs_tcp_tls_setup_socket(),
so the take and release are balanced one-for-one.
The non-TLS connect worker (xs_tcp_setup_socket) never reads
sock_xprt::clnt, so leave that path alone and avoid the
clnt-holds-xprt-holds-clnt cycle that would otherwise prevent
xprt destruction.
Reported-by: Michael Nemanov <michael.nemanov@vastdata.com>
Closes: https://lore.kernel.org/linux-nfs/40e3d522-dfcf-4fc1-9c55-b5e81f1536d5@vastdata.com/
Fixes: 75eb6af7acdf ("SUNRPC: Add a TCP-with-TLS RPC transport class")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michael Nemanov <michael.nemanov@vastdata.com>
Reviewed-by: Michael Nemanov <michael.nemanov@vastdata.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
The signed gen_loader used to police its own metadata map from within
BPF: emit_signature_match() read the kernel-cached map->sha[] back
through hardcoded struct bpf_map offsets and compared it against a hash
that compute_sha_update_offsets() baked into the signed instructions,
after a BPF_OBJ_GET_INFO_BY_FD round-trip to populate map->sha[].
The kernel now verifies the metadata at BPF_PROG_LOAD time by folding
the frozen contents of the loader's exclusive fd_array maps into the
signature, so the loader no longer checks anything itself. Generated
loaders thus carry no verification logic of their own anymore: Nothing
in the signing chain depends on emitted loader bytecode doing the right
thing.
On the loading side, skel_internal.h now sets fd_array_cnt for a signed
load so the kernel scans fd_array for the exclusive metadata map -
still frozen, as the kernel requires - and the BPF_OBJ_GET_INFO_BY_FD
round-trip to populate map->sha[] is gone. The struct bpf_map layout
BUILD_BUG_ON()s on the kernel side are removed as well: they only
pinned the ABI for the in-BPF read of map->sha[] that is no longer
needed. Same for the map->excl member. Note: gen_hash is retained; it
still marks a loader as signed so an untrusted host cannot re-dimension
maps or override initial values now covered by the signature.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260708075343.358712-4-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
A signed gen_loader program carries the programs, maps and relocations
it installs in a metadata array map. The loader instructions are covered
by the PKCS#7 signature, but the metadata map is not: Today the loader
compares the map contents from within BPF against a hash baked into its
(signed) instructions, using the kernel-cached map hash. The kernel
itself never actually attests that the metadata the loader installs is
the metadata that was signed.
This split is the core of the long-standing objection to the BPF signing
scheme from the LSM / integrity side: the integrity check of a light
skeleton only completes once the loader program runs, that is, after the
security_bpf_prog_load() hook, so at admission time an LSM observes a
program whose payload has not yet been verified. Auditing the chain
link is also not a purely cryptographic operation: whoever signs or
reviews an lskel has to disassemble the loader's preamble to convince
themselves that the embedded hash check is present and correct [0][1].
Two acceptable fixes were identified in those threads: Complete the
integrity check before the admission hook fires, or add a second hook
that collects the verification result after the loader ran [2]. Covering
both the loader and its maps directly with the PKCS#7 signature is what
Blaise Boscaccy's patchsets proposed in several forms. Let's implement
the former, without growing the UAPI, and in particular as a single
unified scheme where the signature spans the raw bytes rather than
derived hashes.
A signed loader binds its metadata map(s) through the existing fd_array,
and an exclusive map is already bound to a program digest (excl_prog_hash).
So when a signature is present, collect the exclusive maps from fd_array
and append their frozen contents to the instructions before verification:
The signature now covers insns || metadata_0 || metadata_1 || [...] in
the fd_array order, and verification completes in bpf_check(), once the
fd_array maps are resolved into used_maps, before the LSM admission hook
and the rest of verification. A program is either BPF_SIG_UNSIGNED or
BPF_SIG_VERIFIED, with nothing in between. While folding the fd_array
maps, a non-exclusive map bound to a signed program is rejected, so every
map folded into the signature is exclusive. A signed loader that fails
to cover its metadata thus does not load, and BPF_SIG_VERIFIED always
means the instructions and every exclusive map are authentic. The maps
must be frozen so the hashed bytes cannot change before the loader runs;
the map <-> program digest binding is enforced by the verifier for every
used map. Binding maps through fd_array_cnt makes the verifier resolve
and excl-check them (excl_prog_sha vs prog->digest) before it would
otherwise compute the digest, so compute prog->digest up front in
bpf_check(), over the unmodified instructions the signature covers, for
a load that folds metadata.
Unsigned programs are not affected by the signature path; for them the
LSM admission hook merely moves below fd_array resolution, with minimal
bounded work in between. Note, signed loaders generated by older libbpf/
bpftool versions need to be regenerated; some of the recent fixes we've
had on the signed loader side require the latter already to close gaps.
Finally, some remarks around the security_bpf_prog_load() placement
given there was discussion on whether a new hook is needed or the existing
security_bpf_prog() hook should be reused [3]: For a new hook it would
mean that just for loading a single BPF program it has to pass through
four layers of LSM hooks:
1) security_bpf (cmd=PROG_LOAD): for gating various bpf subcmds
2) security_bpf_prog_load: historical admission hook (CAP/token,
prog_type, attach point), pre-verification
3) security_bpf_prog_verify_signature: newly asked admission hook,
same role as 2), plus the BPF signature verdict
4) security_bpf_prog: gate handing the prog fd back to userspace,
verification done & signature verified
The use-cases of 2) and 3) conflate, thus BPF community prefers to just
keep a total of 3 LSM hooks (as-is today): 3) makes 2) incoherent given
they are the /same class/ of hook, that is, access-control admission on
the load and split only by _what_ they can see. Worse, with the split,
for a signed BPF program security_bpf_prog_load 2) admits a program whose
signature has not been checked, so a policy gating at 2) is structurally
unable to express "admit only verified" and every such policy is forced
onto 3) *anyway*. In other words, one doesn't get two complementary hooks,
but rather, one real admission hook aka 3) plus a now-degraded /legacy/
hook 2) that can't answer the question operators actually want to ask.
Reusing security_bpf_prog() 4) for admission is no alternative either:
it fires only after the entire verifier (and JIT) pipeline ran, so
denying a not-yet-verified program at that point burns exactly the
work a denial is supposed to avoid, and by then the program has an id
assigned and the kallsyms/perf/audit load events fired. Policies are
free to also consume the signature verdict at 4), but admission control
belongs into security_bpf_prog_load(). Hence the latter remains the only
admission hook, merely moved past signature verification; with moving
large allocations further down into the BPF verifier, there is now only
minimal work between the old and new location: The preparation work in
bpf_check() is reordered such that only the minimally necessary setup
happens up front: Allocating the env, initializing the verifier log and
resolving the fd_array that a signed BPF metadata map needs. The worst
case allocation up until security_bpf_prog_load() is ~90K which is the
env itself (~54K) plus the continuous fd_array cache (at most 32K). The
insn_aux_data array is moved into a later stage in the verification.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/2f71d6c03698eb17d51f7247efde777627ee578a.camel@HansenPartnership.com [0]
Link: https://lore.kernel.org/lkml/ecf0521ed302db672672ebfbc670ecfba36a6e00.camel@HansenPartnership.com [1]
Link: https://lore.kernel.org/bpf/88703f00d5b7a779728451008626efa45e42db3d.camel@HansenPartnership.com [2]
Link: https://lore.kernel.org/bpf/DJOFY21DYUI4.19WKQ3NPZ4H5R@gmail.com [3]
Link: https://lore.kernel.org/bpf/20260708075343.358712-3-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
The fd_array passed to BPF_PROG_LOAD carries the map and module BTF file
descriptors a program binds. The verifier reads it more than once during
a load: process_fd_array() walks it to bind the maps and BTFs, and
check_and_resolve_insns() and the kfunc BTF resolver later read it again
to resolve the program's BPF_PSEUDO_MAP_IDX* and module kfunc refs.
For signed BPF, we need these upfront in memory, thus resolve each fd to
its object once and cache it by fd_array index, then bind that cached
object for the rest of the load. env->fd_array becomes a small per-slot
{map, btf} cache rather than a bpfptr_t; every later reference is then
an in-bounds lookup of an already-resolved object, and an index outside
the cache is rejected instead of read from user memory:
- continuous (fd_array_cnt given): the caller declares the length and
every entry is resolved and bound up front (used also by the BPF
signed loader)
- sparse (no fd_array_cnt): left as the legacy path with no fd_array
cache; each reference reads its fd from the caller's fd_array and
resolves it on the spot. Deduplication in used_maps and the kfunc BTF
table keeps this correct, and only unsigned programs use this shape.
Split these into separate helpers to make it easier to follow.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/bpf/20260708075343.358712-2-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Add MIPI PHY power domain for shared PHY resources used by both
MIPI DSI and CSI blocks.
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Fixes: e9aa77d413c9 ("soc: imx: add i.MX93 media blk ctrl driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Introduce typec_cable_altmode_unsupported function to evaluate whether an
alternate mode is restricted based on the connected cable's properties.
Implement validation logic that parses the cable's identity to catch
incompatible setups early. Alternate modes are restricted over:
- cables lacking an identity header
- passive cables with USB 2.0 speed
- active cables unless they have corresponding plugs
The function returns false if the cable is not registered or the identifier
is not set.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260626142702.1941182-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused arch_needs_cpu() hook. No architectures use it after
s390 removed its use case.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
IPVS callers already parse the packet into struct ip_vs_iphdr before
updating connection state. For IPv6 this records the real
transport-header offset after extension headers in iph.len.
Pass this parsed transport offset through ip_vs_set_state() and the
protocol state_transition() callback so protocol handlers can use the
same packet context as scheduling and NAT handling. This patch only
changes the common callback plumbing and adapts the protocol callback
signatures; TCP and SCTP start using the value in follow-up patches.
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The combination of IPIP tunnel with direct xmit, eg. bridge device,
breaks because no dst_entry is provided to check the skb headroom and to
set the iph->frag_off field. This leads to invalid dst usage and can
trigger a crash in the tunnel transmit path.
Fix this by moving dst_cache and dst_cookie out of the runtime union so
that they can be shared by neighbour, xfrm, and direct tunnel flows.
For FLOW_OFFLOAD_XMIT_DIRECT tuples carrying tunnel metadata, preserve
route state in these shared fields and release it through the common
dst release path.
Since dst_entry is now available to the three supported xmit modes and
dst_release() already deals with NULL dst, remove the xmit type check
in nft_flow_dst_release(). Moreover, skip the check if the dst entry
is NULL in nf_flow_dst_check() which is now the case for the direct
xmit case.
Based on patch from Rein Wei <n05ec@lzu.edu.cn>.
Fixes: d30301ba4b07 ("netfilter: flowtable: Add IPIP tx sw acceleration")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Zhengyang Chen <chzhengyang2023@lzu.edu.cn>
Reported-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
No driver supports for IPIP tunnels yet, give up early on setting up the
hardware offload for this scenario.
This patch adds a stub that can be enhanced to add more configuration
that are currently not supported. As of now, the offload work is
enqueued to the worker, then ignored if the hardware offload
configuration is not supported.
Check the NF_FLOW_HW flag to know if this entry was already tried once
to be offloaded so this is not retried on refresh when unsupported. Move
NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag
is unset the _del and _stats variants are never called.
This can be updated later on to skip hardware offload work to be queued
in case hardware offload does not support it.
Fixes: d98103575dcd ("netfilter: flowtable: Add IP6IP6 rx sw acceleration")
Fixes: ab427db17885 ("netfilter: flowtable: Add IPIP rx sw acceleration")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Zhengyang Chen <chzhengyang2023@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
A race condition exists between device teardown and incoming MLD query
processing, leading to a Use-After-Free in the MLD delayed work.
During device destruction, the primary reference to inet6_dev is dropped,
which can drop its refcount to 0. The actual freeing of inet6_dev memory
is deferred via RCU.
Concurrently, the packet receive path runs under RCU read lock and obtains
the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can
safely dereference inet6_dev even if its refcount has hit 0.
However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it
attempts to acquire a reference using in6_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the inet6_dev memory is still scheduled to be freed after the RCU
grace period, the device is freed while the work is still scheduled.
When the work runs, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in6_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not schedule the work.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A race condition exists between device teardown (inetdev_destroy) and
incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free
in the IGMP timer callback.
During device destruction, inetdev_destroy() drops the primary reference
to in_device, which can drop its refcount to 0. The actual freeing of
in_device memory is deferred via RCU (using call_rcu()).
Concurrently, igmp_rcv() runs under RCU read lock and obtains the
in_device pointer. Because the memory is RCU-protected, CPU-0 can safely
dereference in_device even if its refcount has hit 0.
However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it
attempts to acquire a reference using in_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the in_device memory is still scheduled to be freed after the RCU
grace period (as the free callback does not check the refcount again),
the device is freed while the timer is still armed. When the timer
expires, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not arm the timer.
A similar issue in IPv6 MLD is fixed in a subsequent patch.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The old of_drm_get_panel_orientation() function was replaced by the
drm_of_get_panel_orientation() in the core DRM OF helpers. Replace all
uses of the old helper and remove it.
Changes in v5:
- also convert r63419 panel
Changes in v4:
- also convert anbernic, chipone and ili9488 panels
Changes in v2:
- include drm_of.h in all drivers to make sure the new symbol is defined
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260701121055.192475-4-tzimmermann@suse.de
|
|
Implement drm_of_get_panel_orientation() to retrieve a panel's
rotation property as enum drm_panel_orientation. The code has
been taken from of_drm_get_panel_orientation(), so convert that
helper over. Callers of the old helper can be converted as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260701121055.192475-2-tzimmermann@suse.de
|
|
Backmerging to get updates from v7.2-rc2 into drm-misc-next.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
The controller prefix (c<N>) in phys_port_name is currently restricted
to external host controllers. This layout sufficed when DPUs only had a
single local controller and one or more external host controllers.
However, newer devices can have multiple controllers within the DPU
itself, even within a single host environment. To support these
topologies, allow drivers to report the controller number regardless of
the "external" flag status. Any non-zero controller number will now be
explicitly reported, even for single-host or local DPU controllers.
Existing ports with controller=0 are unaffected.
Update documentation and kdoc to clarify that a non-zero controller
number does not require the external flag to be set.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260702111726.816985-2-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add an exported helper iomap_folio_mark_uptodate() to mark a folio as
uptodate and update its uptodate bitmap if the folio has iomap state
data attached.
This is needed because there are some filesystems (eg fuse) that have
paths outside of conventional iomap calls that need to mark a folio as
uptodate (eg writing server-pushed data directly into the page cache)
and need the iomap-internal uptodate bitmap to be in sync with the
uptodate state of the folio.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Syscall User Dispatch is presently built under CONFIG_GENERIC_SYSCALL and
cannot be disabled independently.
Add CONFIG_SYSCALL_USER_DISPATCH to make it an optional feature.
Signed-off-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260706140020.873735-2-gourry@gourry.net
|
|
'20260608-shikra-gcc-rpmcc-clks-v5-2-94cefe092ee3@oss.qualcomm.com' into clk-for-7.3
Merge Shikra RPM and global clock controller bindings through topic
branch, to allow constants to be made available to DeviceTree branches
as well.
|
|
Add device tree bindings for the global clock controller on Qualcomm
Shikra SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260608-shikra-gcc-rpmcc-clks-v5-2-94cefe092ee3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add the Morse Micro mm81x series vendor ids.
Acked-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
|
|
'struct __kernel_old_timespec' represents the 'native' time ABI of the
kernel. On 32-bit systems it uses 32-bit fields and on 64-bit systems
it uses 64-bit fields.
However the x86 x32 ABI uses the 64-bit time ABI natively. This is
correctly handled for the 'tv_sec' fields, through the typedefs of
'__kernel_old_time_t' -> '__kernel_long_t' -> 'long long'. The same
treatment was missed for 'tv_nsec'.
In practice this might not make much of a difference as the value of
'tv_nsec' will always fit into 32 bits and the missing bits fall
into the padding of the structure.
When introspecting the structure however, a difference can be observed.
Switch to 64-bit tv_nsec on x32. No other architectures or ABIs are
affected.
While this could be interpreted as violating the POSIX requirement of
'timespec::tv_nsec' being 'long':
* __kernel_old_timespec is not actually the POSIX timespec type
* the requirement is gone in newer versions of POSIX
* this matches glibc
Fixes: 94c467ddb273 ("y2038: add __kernel_old_timespec and __kernel_old_time_t")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260504-timespec-x32-v2-1-0739c9047fc4@linutronix.de
|
|
All architectures are now fully using the generic vDSO infrastructure.
They don't need these declarations anymore to implement the functions
in architecture-specific code.
Move them to the private header.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260707-timekeeping-header-cleanup-v1-2-e85ad96409a9@linutronix.de
|
|
The only caller of vdso_time_update_aux() is already gated behind
CONFIG_POSIX_AUX. The additional check in the header files is not
necessary.
Remove it and then fold the declarations into the existing
CONFIG_GENERIC_GETTIMEOFDAY ifdeffery.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260707-timekeeping-header-cleanup-v1-1-e85ad96409a9@linutronix.de
|
|
hrtimer.h is used all over the kernel. Any change to hrtimer_bases.h
effectively triggers a full rebuild.
As all logical dependencies from hrtimer.h to hrtimer_bases.h have been
removed, the inclusion is now unncessary. Remove it.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260702-hrtimer-header-dependencies-v1-8-c50b19bda473@linutronix.de
|
|
Multiple used types and symbols are only visible through transitive
dependency chains.
Include the headers explicitly as those chains are going to go away.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260702-hrtimer-header-dependencies-v1-6-c50b19bda473@linutronix.de
|
|
The usage of the hrtimer base forces hrtimer.h to also expose the base
structure definitions.
Move the function to hrtimer.c to avoid this.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260702-hrtimer-header-dependencies-v1-3-c50b19bda473@linutronix.de
|
|
The usage of the hrtimer base introduces a dependency on the timer base
structure definitions from the widely-used hrtimer.h.
Move the helper to hrtimer_bases.h to trim this dependency.
Also adapt the two only callers to now include hrtimer_bases.h.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260702-hrtimer-header-dependencies-v1-2-c50b19bda473@linutronix.de
|
|
This header was originally added for #defines and was later extended
with the hrtimer base structures. All the #defines have been removed
in the meantime, so the naming is off now.
Rename the header to fit its contents more.
This will also make the upcoming addition of some functions nicer.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260702-hrtimer-header-dependencies-v1-1-c50b19bda473@linutronix.de
|
|
The kstat_irqs field of struct irq_desc is used to store a per-cpu count
of interrupt events. It is initialized in init_desc(), along with all
the other fields in struct irq_desc that need explicit initialization,
and therefore it's always available (non-NULL) for any valid interrupt
descriptor (with a caveat - see below).
When CONFIG_SPARSE_IRQ is enabled, all interrupt descriptors are always
allocated dynamically via alloc_desc(), which calls init_desc(), so in
that case kstat_irqs is guaranteed to be non-NULL before a valid struct
irq_desc pointer is even returned.
By contrast, when CONFIG_SPARSE_IRQ is disabled, interrupt descriptors
are allocated statically in the irq_desc[] array, and kstat_irqs is
initialized implicitly to NULL. The per-cpu pointer is initialized only
later, for all descriptors, via start_kernel() -> early_irq_init() ->
init_desc().
The kstat_irqs field is used mostly for printing interrupt statistics
(i.e. reading /proc/interrupts), and that cannot happen until much
later, when user-space is fully initialized. So, there is no concern
with that use case.
The list below includes all functions where the NULL check is removed,
along with a list of all possible call chains and/or a brief explanation
of why it's safe to remove the NULL check in that case.
* irq_desc_kstat_cpu() [include/linux/irqdesc.h]
- All direct call sites use it for printing IRQ statistics.
- Indirect call site: per_cpu_count_show() - also used for printing
interruptstatistics.
* kstat_irqs_cpu() [kernel/irq/irqdesc.c]
- Called by sun3_int7() and sun3_int5() [arch/m68k/sun3/sun3ints.c]
These are interrupt handlers and cannot be called until their
corresponding interrupts are initialized in sun3_init_IRQ(). The
call chain leading to that is:
start_kernel() -> init_IRQ() [arch/m68k/kernel/ints.c] ->
mach_init_IRQ = sun3_init_IRQ()
The init_IRQ() call happens right *after* the early_irq_init() call,
which means the descriptors are already fully initialized by the
time the interrupt handlers are even registered.
- Called by show_interrupts() [arch/s390/kernel/irq.c] - used for
printing interrupt statistics.
* kstat_irqs() [kernel/irq/irqdesc.c]
The only possible call chain is via fs/proc/stat.c:
stat_open() -> show_stat() -> show_all_irqs() -> kstat_irqs_usr() ->
kstat_irqs()
It is used for printing interrupt statistics.
* kstat_snapshot_irqs()
The only possible call chain is via kernel/watchdog.c:
watchdog_timer_fn() -> is_softlockup() -> start_counting_irqs() ->
kstat_snapshot_irqs()
The watchdog timer cannot fire early, before early_irq_init().
* kstat_get_irq_since_snapshot()
The only possible call chain is via kernel/watchdog.c:
watchdog_timer_fn() -> report_cpu_status() -> print_irq_counts() ->
kstat_get_irq_since_snapshot()
The watchdog timer cannot fire early, before early_irq_init().
Signed-off-by: Radu Rendec <radu@rendec.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260705210951.2717741-2-radu@rendec.net
|
|
task_euid() is a very weird operation. You can see how weird it is by
grepping for task_euid() - binder is its only user. task_euid() obtains
the objective effective UID - it looks at the credentials of the task
for purposes of acting on it as an object, but then accesses the
effective UID (which the credentials.7 man page describes as "[...] used
by the kernel to determine the permissions that the process will have
when accessing shared resources [...]").
Since usage in Binder has now been removed, get rid of the resulting
dead code.
Changes to the zh_CN translation was carried out with the help of
Gemini and Google Translate, and since adjusted as per Alex Shi's
feedback.
Suggested-by: Jann Horn <jannh@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
BTF struct walks relax the struct-size check for accesses through a
trailing flexible array. That is valid for ordinary BTF type walking, but
PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static
BTF type size.
When walking a MEM_ALLOC object, reject the access before applying the
flexible-array relaxation if the access range extends past the struct size.
Apply the same policy to struct ID matching so kfunc and kptr type checks
do not walk past the allocated object bounds either.
Fixes: 958cf2e273f0 ("bpf: Introduce bpf_obj_new")
Fixes: 36d8bdf75a93 ("bpf: Add alloc/xchg/direct_access support for local percpu kptr")
Signed-off-by: Yiyang Chen <chenyy23@mails.tsinghua.edu.cn>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/4b8c8a81102ba4b595011434c881194f264ddc59.1782807039.git.chenyy23@mails.tsinghua.edu.cn
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Tracepoints require that RCU is watching. To prevent them from being used
in places that RCU is not watching, the trace_##event() macro always
calls rcu_is_watching() even when the event is not enabled and warns if
RCU is not watching. This is to make sure a warning is triggered even if
the tracepoint is never enabled (as it is only a bug when it is).
It was noticed that tracepoints could be hidden within
trace_#event#_enabled() calls, which are used to do extra work for the
tracepoint only if the tracepoint is enabled. But this also can hide the
fact that a tracepoint is placed in a location that can be called when RCU
is not watching.
Commit 9764e731ef6ab ("tracepoint: Add lockdep rcu_is_watching() check to
trace_##name##_enabled()") added a check to the trace_##event##_enabled()
macro to make sure RCU is watching when it is called to make sure not to
hide the bug of a tracepoint being called when RCU is not watching.
There is one case in the irq_disable tracepoint where it is within a
trace_irq_disable_enabled() block, but it checks if RCU is watching, and
if it isn't, it makes a call to ct_irq_enter() that makes RCU watch again.
But because trace_irq_disable_enabled() now checks if RCU is watching and
will trigger if it isn't. This is a false warning as the code within
the block handles this case.
Add a new internal macro __trace_##event##_enabled() that doesn't check if
RCU is watching, and convert the irq_enable/disable tracepoints over to
it.
Link: https://patch.msgid.link/20260701132744.6a7fc68b@robin
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdXud_RpWag_hFqa2ByBGRxg6KnxGL1ObCWZrpTsk3TfAw@mail.gmail.com/
Fixes: 9764e731ef6ab ("tracepoint: Add lockdep rcu_is_watching() check to trace_##name##_enabled()")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
String event fields are not necessarily NUL-terminated, so the filter
predicate functions (filter_pred_string(), filter_pred_strloc() and
filter_pred_strrelloc()) pass the field length to the regex match
callbacks, and the length-aware matchers honour it.
regex_match_glob() was the exception: it ignored the length and called
glob_match(), which scans the string until it hits a NUL byte. Some
string fields are not NUL-terminated. One example is the dynamic char
array of the xfs_* namespace tracepoints, which is copied without a
trailing NUL. For such a field, glob matching reads past the end of
the event field, causing a KASAN slab-out-of-bounds read in
glob_match(), reached via regex_match_glob() and filter_match_preds()
from the xfs_lookup tracepoint.
Add a length-bounded glob_match_len() and use it from regex_match_glob()
so glob matching always stops at the field boundary. The matching loop
is factored into a shared helper so glob_match() keeps its behaviour.
Fixes: 60f1d5e3bac4 ("ftrace: Support full glob matching")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/da1aaf125fc3b63320b0c540fd6afa7c3d5b4f1a.1782836943.git.hhhuang@smu.edu.sg
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
interconnect in Maili SoC
Document the RPMh Network-On-Chip interconnect for the Qualcomm Maili
SoC.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260622-maili_icc-v2-1-18b5ac08c04f@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
Use the descriptor's `ep_mem_offset` to calculate the start of the endpoint
memory access array and to comply with the FF-A spec instead of defaulting
to `sizeof(struct ffa_mem_region)`.
This requires moving `ffa_mem_region_additional_setup()` earlier in the setup
flow.
Also, add sanity checks to ensure the calculated descriptor offsets do not
exceed `max_fragsize`.
Fixes: 113580530ee7 ("firmware: arm_ffa: Update memory descriptor to support v1.1 format")
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://patch.msgid.link/20260702103848.1647249-3-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The drm_exec component uses a variable with scope limited to the for() and
an indirect goto to allow instantiating multiple macros in the same
function.
This unfortunately doesn't work well with certain compilers when the
indirect goto can't be lowered to a direct jump.
Switch the indirect goto to a direct goto, the drawback is that we now
can't use the dma_exec_until_all_locked() macro in the same function
multiple times.
The is currently only one user of this and only as a hacky workaround
which is about to be removed.
So document that the __label__ statement should be used when the macro is
used multiple times and fix the tests and the only use case where that is
necessary.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 9920249a5288 ("drm/amdgpu: convert amdgpu_vm_lock_by_pasid() to drm_exec")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606231854.7LeCtlLe-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202606232356.gwHMAJAW-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202606240753.kYjobJVl-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202606241110.iUga5vVw-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202607031446.1PWG18mN-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202607031837.HSmBj8pr-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202607040159.GopyEswS-lkp@intel.com/
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20260704084133.122053-1-christian.koenig@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Lucero Palau, Alejandro says:
====================
pull request: sfc 2026-07-01
here are the last CXL core changes for enabling CXL Type2 drivers to
initialize a CXL-capable device plus the netdev sfc driver changes using
this new CXL core Type2 support.
Please pull or let me know of any problem!
SFC changes for CXL type2 enabling
* tag 'sfc-net-pullrequest-20260630' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
sfc: support pio mapping based on cxl
sfc: obtain and map cxl range using devm_cxl_probe_mem
sfc: Initialize cxl dpa
sfc: Map cxl regs
sfc: add cxl support
cxl: Support dpa without a mailbox
cxl: Support Type2 cxl regs mapping
====================
Link: https://patch.msgid.link/20260701113805.14072-1-alejandro.lucero-palau@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Prevent the pKVM hypervisor from making assumptions that the
endpoint memory access descriptor (EMAD) comes right after the
FF-A memory region header.
Prior to FF-A version 1.1 the header of the memory region
didn't contain an offset to the endpoint memory access descriptor.
The layout of a memory transaction looks like this from 1.1 onward:
Type | Field name | Offset
[ Header | ffa_mem_region | 0
EMAD 1 | ffa_mem_region_attributes) | ffa_mem_region.ep_mem_offset
]
Verify that the offset to the first endpoint memory access descriptor
is within the mailbox buffer bounds.
Also, fix one hardcoded sizeof(struct ffa_mem_region_attributes) that
should be replaced ffa_emad_size_get() for compatibility with FFA v1.0.
Fixes: 42fb33dde42b ("KVM: arm64: Use FF-A 1.1 with pKVM")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://patch.msgid.link/20260702103848.1647249-5-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
This commit makes use of the building blocks previously added to
implement cross-device rate nodes.
A new 'supported_cross_device_rate_nodes' bool is added to devlink_ops
which lets drivers advertise support for cross-device rate objects.
If enabled and if there is a common shared devlink instance, then:
- all rate objects will be stored in the top-most common nested instance
and
- rate objects can have parents from other devices sharing the same
common instance.
Storing rates in the common shared ancestor is safe, because it is
reference counted by its nested devlink instances, so it's guaranteed to
outlive them. Furthermore, the shared devlink infra guarantees a given
nested devlink hierarchy is managed by the same driver.
The parent devlink from info->ctx is not locked, so none of its mutable
fields can be used. But parent setting only requires comparing devlink
pointer comparisons. Additionally, since the shared devlink is locked,
other rate operations cannot concurrently happen.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260701073254.754518-8-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
