| Age | Commit message (Collapse) | Author |
|---|
|
drbg_cpu_to_be32() is being used to do a plain write to a byte array,
which doesn't have any alignment guarantee. This can cause a misaligned
write. Replace it with the correct function, put_unaligned_be32().
Fixes: 72f3e00dd67e ("crypto: drbg - replace int2byte with cpu_to_be")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
xfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate()
in net/key/af_key.c both hardcode &init_net for the multicast that
announces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE.
XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and the
rest of the xfrm/af_key netlink path was made netns-aware in 2008.
The other 14 multicast paths in xfrm_user.c route their event using
xs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate path
was missed.
Two consequences of the init_net hardcoding:
1. The notification (selector, old/new endpoint addresses, and the
km_address) is delivered to listeners on init_net's
XFRMNLGRP_MIGRATE / pfkey BROADCAST_ALL groups rather than on
the issuing netns. An IKE daemon running in init_net therefore
receives migration notifications originating from any other
netns on the host.
2. An IKE daemon running inside a non-init netns and subscribed
to its own XFRMNLGRP_MIGRATE / pfkey groups never receives the
notification of its own migration. IKEv2 MOBIKE / address-update
handling inside a netns is silently broken.
Thread struct net through km_migrate() and the xfrm_mgr.migrate
function pointer, drop the &init_net override in xfrm_send_migrate()
and pfkey_send_migrate(), and pass the caller's net (already in
scope in xfrm_migrate() via sock_net(skb->sk)) all the way down.
struct xfrm_mgr is in-tree only and not exported as a stable API,
so the function-pointer signature change is internal.
pfkey_broadcast() is already netns-aware via net_generic(net,
pfkey_net_id) since the pernet conversion. The five other
pfkey_broadcast() callers in af_key.c already pass xs_net(x),
sock_net(sk) or a per-netns net, so this only removes the
&init_net outlier.
Fixes: 5c79de6e79cd ("[XFRM]: User interface for handling XFRM_MSG_MIGRATE")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The kernel-doc block above struct drm_gpusvm_pages duplicates the
descriptions of the bit-flags that live in struct drm_gpusvm_pages_flags
using dotted notation (@flags.migrate_devmem, @flags.unmapped, ...).
That dotted notation is intended for nested anonymous structs/unions that
the parser flattens into the parent's parameter list. Here, however,
flags is of a named external type, so the parser does not flatten its
members and the dotted entries do not match any member of
drm_gpusvm_pages. They also duplicate the canonical descriptions already
present in the kernel-doc of struct drm_gpusvm_pages_flags itself.
Drop the five @flags.* lines and replace them with a single @flags entry
that cross-references the type via kernel-doc's "&struct ..." syntax.
This eliminates the redundancy and removes warnings emitted by the new
parameterdescs check in scripts/kernel-doc:
Excess struct member 'flags.migrate_devmem' description in
'drm_gpusvm_pages'
Excess struct member 'flags.unmapped' description in 'drm_gpusvm_pages'
Excess struct member 'flags.partial_unmap' description in
'drm_gpusvm_pages'
Excess struct member 'flags.has_devmem_pages' description in
'drm_gpusvm_pages'
Excess struct member 'flags.has_dma_mapping' description in
'drm_gpusvm_pages'
No functional change.
Assisted-by: Claude:claude-opus-4.6
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260501175956.4054088-1-shuicheng.lin@intel.com
|
|
Pull smb server fixes from Steve French:
- Fix memory leak in connection free
- Fix inherited ACL ACE validation
- Minor cleanup
- Fix for share config
- Fix durable handle cleanup race
- Fix close_file_table_ids in session teardown
- smbdirect fixes:
- Fix memory region registration
- Two fixes for out-of-tree builds
* tag 'v7.1-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate inherited ACE SID length
ksmbd: fix kernel-doc warnings from ksmbd_conn_get/put()
ksmbd: fail share config requests when path allocation fails
ksmbd: close durable scavenger races against m_fp_list lookups
ksmbd: harden file lifetime during session teardown
ksmbd: centralize ksmbd_conn final release to plug transport leak
smb: smbdirect: fix MR registration for coalesced SG lists
smb: smbdirect: introduce and use include/linux/smbdirect.h
smb: smbdirect: make use of DEFAULT_SYMBOL_NAMESPACE and EXPORT_SYMBOL_GPL
|
|
This driver supports both SPI and MMIO based register access, but only
the former has devicetree support. While MMIO mode would have worked
with old-style board files, those have never defined such a device
upstream.
Remove the MMIO mode, leaving SPI as the only way to use this driver,
but leave it in two loadable modules. More cleanups can be done by
combining the two into one file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260505180459.1247690-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Representor callbacks can be registered and unregistered while the
E-Switch is already in switchdev mode, and the same E-Switch may also be
reconfigured by devlink, VF changes and SF changes. Serialize these paths
with the per-E-Switch representor mutex instead of relying on ad-hoc bit
state and wait queues.
Take the representor lock around the mode transition, VF/SF representor
changes and representor ops registration. Keep mode_lock and the
representor lock unnested by using the operation flag while the mode lock
is dropped. During mode changes, drop the representor lock around the
auxiliary bus rescan because driver bind/unbind may register or unregister
representor ops.
Split representor ops registration into locked public wrappers and blocked
internal helpers, clear the ops pointer on unregister, and add nested
wrappers for the shared-FDB master IB path that registers peer
representor ops while another E-Switch representor lock is already held.
On unregister, always call __unload_reps_all_vport() before marking reps
unregistered and clearing rep_ops. The per-representor state check makes
this a no-op for types that were not loaded, so unregister no longer has
to infer load state from esw->mode.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260503202726.266415-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add kernel-doc for one struct member and use the correct function name
to eliminate kernel-doc warnings:
Warning: include/linux/platform_data/spi-s3c64xx.h:40 struct member
'polling' not described in 's3c64xx_spi_info'
Warning: include/linux/platform_data/spi-s3c64xx.h:51 expecting prototype
for s3c64xx_spi_set_platdata(). Prototype was for
s3c64xx_spi0_set_platdata() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260506175144.449364-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
inversion
When a BLE peripheral sends an L2CAP Connection Parameter Update Request
the processing path is:
process_pending_rx() [takes conn->lock]
l2cap_le_sig_channel()
l2cap_conn_param_update_req()
hci_le_conn_update() [takes hdev->lock]
Meanwhile other code paths take the locks in the opposite order:
l2cap_chan_connect() [takes hdev->lock]
...
mutex_lock(&conn->lock)
l2cap_conn_ready() [hdev->lock via hci_cb_list_lock]
...
mutex_lock(&conn->lock)
This is a classic AB/BA deadlock which lockdep reports as a circular
locking dependency when connecting a BLE MIDI keyboard (Carry-On FC-49).
Fix this by making hci_le_conn_update() defer the HCI command through
hci_cmd_sync_queue() so it no longer needs to take hdev->lock in the
caller context. The sync callback uses __hci_cmd_sync_status_sk() to
wait for the HCI_EV_LE_CONN_UPDATE_COMPLETE event, then updates the
stored connection parameters (hci_conn_params) and notifies userspace
(mgmt_new_conn_param) only after the controller has confirmed the update.
A reference on hci_conn is held via hci_conn_get()/hci_conn_put() for
the lifetime of the queued work to prevent use-after-free, and
hci_conn_valid() is checked before proceeding in case the connection was
removed while the work was pending. The hci_dev_lock is held across
hci_conn_valid() and all conn field accesses to prevent a concurrent
disconnect from invalidating the connection mid-use.
Fixes: f044eb0524a0 ("Bluetooth: Store latency and supervision timeout in connection params")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
configurable
When the counter assignment mode is mbm_event resctrl assumes the MBM
events are configurable and exposes the 'event_filter' files. These files
live at info/L3_MON/event_configs/<event>/event_filter and are used to
display and set the event configuration.
The MPAM architecture has support for configuring the memory bandwidth
utilization (MBWU) counters to only count reads or only count
writes. However, in MPAM, this event filtering support is optional in the
hardware (and not yet implemented in the MPAM driver) but MBM counter
assignment is always possible for MPAM MBWU counters.
In order to support mbm_event mode with MPAM, create the 'event_filter'
files read only if the event configuration can't be changed. A user can
still chmod the file and so also return early with an error from
event_filter_write().
Introduce a new monitor property, mbm_cntr_configurable, to indicate
whether or not assignable MBM counters are configurable. On x86, set this
to true whenever mbm_cntr_assignable is true to keep existing behaviour.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
|
|
C1-Pro cores with SME have an erratum where TLBI+DSB does not complete
all outstanding SME accesses. Instead a DSB needs to be executed on the
affected CPUs. The implication is that pages cannot be unmapped from the
host Stage 2 and then provided to a protected guest or to the
hypervisor. Host SME accesses may still complete after this point.
This erratum breaks pKVM's guarantees, and the workaround is hard to
implement as EL2 and EL1 share a security state meaning EL1 can mask
IPIs sent by EL2, leading to interrupt blackouts.
Instead, do this in EL3. This has the advantage of a separate security
state, meaning lower EL cannot mask the IPI. It is also simpler for EL3
to know about CPUs that are off or in PSCI's CPU_SUSPEND.
Add the needed hook to host_stage2_set_owner_metadata_locked(). This
covers the cases where the host loses access to a page:
__pkvm_host_donate_guest()
__pkvm_guest_unshare_host()
host_stage2_set_owner_locked() when owner_id == PKVM_ID_HYP
Since pKVM relies on the firmware call for correctness, check for the
firmware counterpart during protected KVM initialisation and fail the
pKVM initialisation if it is missing.
Signed-off-by: James Morse <james.morse@arm.com>
Co-developed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@kernel.org>
Link: https://patch.msgid.link/20260505165205.2690919-1-catalin.marinas@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The optimized RSEQ V2 mode requires that user space adheres to the ABI
specification and does not modify the read-only fields cpu_id_start,
cpu_id, node_id and mm_cid behind the kernel's back.
While the kernel does not rely on these fields, the adherence to this is a
fundamental prerequisite to allow multiple entities, e.g. libraries, in an
application to utilize the full potential of RSEQ without stepping on each
other toes.
Validate this adherence on every update of these fields. If the kernel
detects that user space modified the fields, the application is force
terminated.
Fixes: d6200245c75e ("rseq: Allow registering RSEQ with slice extension")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://patch.msgid.link/20260428224427.845230956%40kernel.org
Cc: stable@vger.kernel.org
|
|
request_firmware_nowait() keeps the callback module pinned and holds
a device reference until the firmware work completes.
Callers still have no way to cancel or synchronize the queued callback
before tearing down their driver-private state.
Track scheduled async firmware work in an internal list and add
request_firmware_nowait_cancel(). The helper cancels work matching the
device, callback context and callback function. It cancels work that has
not started yet and waits for an already-running callback to return. If
the request has already completed, it is a no-op.
Keep the existing request_firmware_nowait() lifetime model manual. A
devres-managed variant can be layered on top separately if needed.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260505-alsa-hda-tas2781-fw-callback-teardown-v4-1-e7c4bf930dc8@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Lots of new content in cfg80211/mac80211, notably
- more NAN work, mostly complete now (also hwsim)
- more UHR work (e.g. non-primary channel access),
this will continue for a while
- FTM ranging APIs
* tag 'wireless-next-2026-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (70 commits)
wifi: mac80211: explicitly disable FTM responder on AP stop
wifi: iwlwifi: don't blindly start the responder upon BSS_CHANGED_FTM_RESPONDER
wifi: mac80211_hwsim: claim HT STBC capability
wifi: mac80211_hwsim: enable NAN_DATA interface simulation support
wifi: mac80211_hwsim: Support Tx of multicast data on NAN
wifi: mac80211_hwsim: Do not declare support for NDPE
wifi: mac80211_hwsim: Declare support for secure NAN
wifi: mac80211_hwsim: add NAN data path TX/RX support
wifi: mac80211_hwsim: set HAS_RATE_CONTROL when using NAN
wifi: mac80211_hwsim: implement NAN schedule callbacks
wifi: mac80211_hwsim: add NAN PHY capabilities
wifi: mac80211_hwsim: add NAN_DATA interface limits
wifi: mac80211_hwsim: implement NAN synchronization
wifi: mac80211_hwsim: protect tsf_offset using a spinlock
wifi: mac80211_hwsim: only RX on NAN when active on a slot
wifi: mac80211_hwsim: select NAN TX channel based on current TSF
wifi: mac80211_hwsim: limit TX of frames to the NAN DW
wifi: cfg80211: don't allow NAN DATA on multi radio devices
wifi: mac80211: check AP using NPCA has NPCA capability
wifi: mac80211: don't parse full UHR operation from beacons
...
====================
Link: https://patch.msgid.link/20260506111147.224296-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for new CRI PCI IDs.
Bspec: 77979
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260505074855.3813063-2-balasubramani.vivekanandan@intel.com
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
|
|
This reverts commit e3953ff665742c15c002af9e176bd24d5cd9ec61.
Seems to have been accidentally pushed without mandatory review.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
Acked-by: Maxime Ripard <mripard@kernel.org> #irc
|
|
vb2_read() and vb2_write() return size_t, but propagate
negative errno values from __vb2_perform_fileio().
This relies on implicit signed/unsigned conversions in callers
(e.g. vb2_fop_read()) to recover error codes:
__vb2_perform_fileio() -> -EINVAL
vb2_read() -> (size_t)-EINVAL
vb2_fop_read() -> -EINVAL
This relies on implicit conversions that are not obvious.
These helpers are exported (EXPORT_SYMBOL_GPL) and part of the
vb2 API, so changing their return type may affect existing users.
However, they conceptually follow read/write semantics, where
ssize_t is typically used to return either a byte count or a
negative error code.
Switch vb2_read() and vb2_write() to ssize_t, and update
__vb2_perform_fileio() accordingly.
Signed-off-by: Zile Xiong <xiongzile99@gmail.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: b25748fe6126 ("[media] v4l: videobuf2: add read() and write() emulator")
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
hrtimer_get_next_event()/hrtimer_next_event_without()
These functions really work in terms of ktime_t and not u64.
Change their return types and adapt the callers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260504-hrtimer-next_event-v2-1-7a5d0550b42f@linutronix.de
|
|
Remove the unused functions __clocksource_update_freq_hz() and
__clocksource_update_freq_khz().
Then make __clocksource_update_freq_scale() static as it is not used
from external callers anymore. Also clean up the comment accordingly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260504-clocksource-update_freq-v2-1-3e696fb01776@linutronix.de
|
|
This let tracers know to which hierarchy a CPU belongs to.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260423165354.95152-6-frederic@kernel.org
|
|
Convert tx_qp from a single contiguous array allocation to per-queue
individual allocations. Each mana_tx_qp struct is approximately 35KB.
With many queues (e.g., 32/64), the flat array requires a single
contiguous allocation that can fail under memory fragmentation.
Change mana_tx_qp *tx_qp to mana_tx_qp **tx_qp (array of pointers),
allocating each queue's mana_tx_qp individually via kvzalloc. This
reduces each allocation to ~35KB and provides vmalloc fallback,
avoiding allocation failure due to fragmentation.
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260502074552.23857-2-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pxa2xx sound library modules are only used by the ASoC driver since
commit b094de7810f3 ("ASoC: codec: Remove pxa2xx-ac97.c"), so move the
code into the one module that uses as a simpliciation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260505202426.3605262-3-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are no remaining static platform_device users of pxa2xx ac97,
so the rest of that code path can go away as well.
Since nothing in the driver uses the gpio number now, constrain the use
of the legacy gpio interface to the architecture specific code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260505202426.3605262-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Nothing ever sets pxa2xx_audio_ops_t since the last users were removed
in ce79f3a1ad5f ("ARM: pxa: prune unused device support") , so stop
passing it around through the sound, ac97 code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260505202426.3605262-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
IPVS fixes for net
The following batch contains IPVS fixes for net to address issues
from the latest net-next pull request.
Julian Anastasov made the following summary:
1-3) Fixes for the recently added resizable hash tables
4) dest from trash can be leaked if ip_vs_start_estimator() fails
5) fixed races and locking for the estimation kthreads
6) fix for wrong roundup_pow_of_two() usage in the resizable hash
tables
7-8) v2 of the changes from Waiman Long to properly guard against
the housekeeping_cpumask() updates:
https://lore.kernel.org/netfilter-devel/20260331165015.2777765-1-longman@redhat.com/
I added missing Fixes tag. The original description:
Since commit 041ee6f3727a ("kthread: Rely on HK_TYPE_DOMAIN for preferred
affinity management"), the HK_TYPE_KTHREAD housekeeping cpumask may no
longer be correct in showing the actual CPU affinity of kthreads that
have no predefined CPU affinity. As the ipvs networking code is still
using HK_TYPE_KTHREAD, we need to make HK_TYPE_KTHREAD reflect the
reality.
This patch series makes HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
and uses RCU to protect access to the HK_TYPE_KTHREAD housekeeping
cpumask.
Julian plans to post a nf-next patch to limit the connections by using
"conn_max" sysctl. With Simon Horman, they agreed that this is an old
problem that we do not have a limit of connections and it is not a
stopper for this patchset.
* tag 'nf-26-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
sched/isolation: Make HK_TYPE_KTHREAD an alias of HK_TYPE_DOMAIN
ipvs: Guard access of HK_TYPE_KTHREAD cpumask with RCU
ipvs: fix shift-out-of-bounds in ip_vs_rht_desired_size
ipvs: fix races around est_mutex and est_cpulist
ipvs: do not leak dest after get from dest trash
ipvs: fix the spin_lock usage for RT build
ipvs: fix races around the conn_lfactor and svc_lfactor sysctl vars
ipvs: fixes for the new ip_vs_status info
====================
Link: https://patch.msgid.link/20260505001648.360569-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Enable PIPEDMC_ERROR interrupt (Dibin)
- Some general display fixes and cleanups (Ville, Nemesa,
Suraj, Dibin, Arun, Desnes, Juha-Pekka, Vidya, Julian)
- More refactor to split display code (Jani, Ville, Luca)
- Panel Replay BW optimization (Animesh)
- Integrate the sharpness filter properly into the scaler (Ville)
- Watermark/SAGV fixes/cleanups/etc (Ville)
- Restructure DP/HDMI sink format handling (Ville)
- Eliminate FB usage from low level pinning code (Ville)
- Some initial prep patches for always enable AS SDP (Ankit)
- Many PSR related fixes (Jouni)
- Fix MST VCPI lookup and modeset-lock splat (Suraj)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/afot1cjSpeAjYzg2@intel.com
|
|
amt does not need to access struct socket itself in the fast path;
it only reads struct sock, and struct socket is only used for tunnel
setup and teardown.
Let's store struct sock directly in struct amt.
amt_dev_stop() is called as dev->netdev_ops->ndo_stop().
synchronize_net() in unregister_netdevice_many_notify() ensures
that inflight amt RX fast paths finish before amt_dev is freed.
amt no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Note that amt_dev_stop() looks buggy; cancel_delayed_work_sync()
should be called after udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-13-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove synchronize_rcu() in udp_tunnel_sock_release().
We must ensure that vxlan_sock is freed after inflight RX fast path.
Let's free vxlan_sock with kfree_rcu().
Note that vxlan_sock.vni_list[] is 8K and struct rcu_head must
be placed before it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 3cf7203ca620 ("net/tunnel: wait until all sk_user_data
reader finish before releasing the sock") added synchronize_rcu()
in udp_tunnel_sock_release().
This was intended to protect the fast path of a dying vxlan device
from dereferencing vxlan_sock->sock->sk after sock_orphan() has set
sock->sk to NULL.
However, vxlan does not need to access struct socket itself in the
fast path; it only reads struct sock, and struct socket is only
used for tunnel setup and teardown.
Let's store struct sock directly in struct vxlan_sock.
In the next patch, we will free vxlan_sock with kfree_rcu(), then
vxlan no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel_notify_{add,del}_rx_port() do not need
struct socket.
Let's change udp_tunnel_notify_{add,del}_rx_port() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel_{push,drop}_rx_port() do not need struct socket.
Let's change udp_tunnel_{push,drop}_rx_port() to take struct
sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel6_dst_lookup() does not need struct socket.
Let's change udp_tunnel6_dst_lookup() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even setup_udp_tunnel_sock() does not need struct socket.
Let's change setup_udp_tunnel_sock() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
While the UDP tunnel interface accepts struct socket, this
encourages users to store the pointer unnecessarily. This
leads to extra dereferences when accessing struct sock fields
(e.g., sk->sk_user_data instead of sock->sk->sk_user_data).
Furthermore, these dereferences necessitate synchronize_rcu()
in udp_tunnel_sock_release() to protect the fast paths from
sock_orphan() setting sk->sk_socket to NULL.
This overhead can be avoided if users store the struct sock
pointer directly in their private structures.
As a prep, let's change udp_tunnel_sock_release() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1-rc1:
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Fix devm_alloc_workqueue() passing a va_list as a positional arg to
the variadic alloc_workqueue() macro, which garbled wq->name and
skipped lockdep init on the devm path. Fold both noprof entry points
onto a va_list helper.
Also, annotate it using __printf(1, 0)
* tag 'wq-for-7.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Annotate alloc_workqueue_va() with __printf(1, 0)
workqueue: fix devm_alloc_workqueue() va_list misuse
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- During v6.19, cgroup task unlink was moved from do_exit() to after the
final task switch to satisfy a controller invariant. That left the kernel
seeing tasks past exit_signals() longer than userspace expected, and
several v7.0 follow-ups tried to bridge the gap by making rmdir wait for
the kernel side. None held up.
The latest is an A-A deadlock when rmdir is invoked by the reaper of
zombies whose pidns teardown the rmdir itself is waiting on, which
points at the synchronizing approach being fundamentally wrong.
Take a different approach: drop the wait, leave rmdir's user-visible
side returning as soon as cgroup.procs is empty, and defer the css
percpu_ref kill that drives ->css_offline() until the cgroup is fully
depopulated.
Tagged for stable. Somewhat invasive but contained. The hope is that
fixing forward sticks. If not, the fallback is to revert the entire
chain and rework on the development branch.
Note that this doesn't plug a pre-existing analogous race in
cgroup_apply_control_disable() (controller disable via
subtree_control). Not a regression. The development branch will do
the more invasive restructuring needed for that.
- Documentation update for cgroup-v1 charge-commit section that still
referenced functions removed when the memcg hugetlb try-commit-cancel
protocol was retired.
* tag 'cgroup-for-7.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup-v1: Update charge-commit section
cgroup: Defer css percpu_ref kill on rmdir until cgroup is depopulated
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix idle CPU selection returning prev_cpu outside the task's cpus_ptr
when the BPF caller's allowed mask was wider. Stable backport.
- Two opposite-direction gaps in scx_task_iter's cgroup-scoped mode
versus the global mode:
- Tasks past exit_signals() are filtered by the cgroup walk but kept
by global. Sub-scheduler enable abort leaked __scx_init_task()
state. Add a CSS_TASK_ITER_WITH_DEAD flag to cgroup's task
iterator (scx_task_iter is its only user) and use it.
- Tasks past sched_ext_dead() are still returned, tripping
WARN_ON_ONCE() in callers or making them touch torn-down state.
Mark and skip under the per-task rq lock.
* tag 'sched_ext-for-7.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: idle: Recheck prev_cpu after narrowing allowed mask
sched_ext: Skip past-sched_ext_dead() tasks in scx_task_iter_next_locked()
cgroup, sched_ext: Include exiting tasks in cgroup iter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All in drivers.
The largest change is the ufs one which has to introduce a new
function to check the power state before doing the update and the most
widely encountered one is the obvious change to sg to not use
GFP_ATOMIC"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: iscsi: reject invalid size Extended CDB AHS
scsi: ufs: core: Fix bRefClkFreq write failure in HS-LSS mode
scsi: hisi_sas: Fix sparse warnings in prep_ata_v3_hw()
scsi: pmcraid: Fix typo in comments
scsi: scsi_dh_alua: Increase default ALUA timeout to maximum spec value
scsi: smartpqi: Silence a recursive lock warning
scsi: mpt3sas: Limit NVMe request size to 2 MiB
scsi: sg: Don't use GFP_ATOMIC in sg_start_req()
scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"Four small patches for fbdev, of which two are important: One fixes
the bitmap font generation and the other prevents a possible
use-after-free in udlfb:
- Fix rotating fonts by 180 degrees (Thomas Zimmermann)
- Drop duplicate include of linux/module.h in fb_defio (Chen Ni)
- Add vm_ops in udlfb to prevent use-after-free (Rajat Gupta)
- ipu-v3: clean up kernel-doc warnings (Randy Dunlap)"
* tag 'fbdev-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free
lib/fonts: Fix bit position when rotating by 180 degrees
fbdev: defio: Remove duplicate include of linux/module.h
fbdev: ipu-v3: clean up kernel-doc warnings
|
|
Add device IDs for the next generation of switchtec products.
No changes to the driver were required with the new version of the
hardware.
[logang: rewrote commit message]
Signed-off-by: Ben Reed <Ben.Reed@microchip.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260505161633.67454-1-logang@deltatee.com
|
|
Rename struct scmi_revision_info to struct scmi_base_info , to
accurately represent its content. The scmi_revision_info is no
longer accurate, because the structure now contains more than
only SCMI base protocol revision, it now also contains number
of protocols, agents, vendor and subvendor strings. All those
are fetched from the base protocol, so rename the structure to
scmi_base_info, to match the other scmi_*_info structure names.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260406155343.72087-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
MISC protocol supports getting reset reason per Logical Machine or
System. Add the API for user to retrieve the information from System
Manager.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260305-scmi-imx-reset-v1-1-18de78978ba9@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
The recent RSEQ optimization work broke the TCMalloc abuse of the RSEQ ABI
as it not longer unconditionally updates the CPU, node, mm_cid fields,
which are documented as read only for user space. Due to the observed
behavior of the kernel it was possible for TCMalloc to overwrite the
cpu_id_start field for their own purposes and rely on the kernel to update
it unconditionally after each context switch and before signal delivery.
The RSEQ ABI only guarantees that these fields are updated when the data
changes, i.e. the task is migrated or the MMCID of the task changes due to
switching from or to per CPU ownership mode.
The optimization work eliminated the unconditional updates and reduced them
to the documented ABI guarantees, which results in a massive performance
win for syscall, scheduling heavy work loads, which in turn breaks the
TCMalloc expectations.
There have been several options discussed to restore the TCMalloc
functionality while preserving the optimization benefits. They all end up
in a series of hard to maintain workarounds, which in the worst case
introduce overhead for everyone, e.g. in the scheduler.
The requirements of TCMalloc and the optimization work are diametral and
the required work arounds are a maintainence burden. They end up as fragile
constructs, which are blocking further optimization work and are pretty
much guaranteed to cause more subtle issues down the road.
The optimization work heavily depends on the generic entry code, which is
not used by all architectures yet. So the rework preserved the original
mechanism moslty unmodified to keep the support for architectures, which
handle rseq in their own exit to user space loop. That code is currently
optimized out by the compiler on architectures which use the generic entry
code.
This allows to revert back to the original behaviour by replacing the
compile time constant conditions with a runtime condition where required,
which disables the optimization and the dependend time slice extension
feature until the run-time condition can be enabled in the RSEQ
registration code on a per task basis again.
The following changes are required to restore the original behavior, which
makes TCMalloc work again:
1) Replace the compile time constant conditionals with runtime
conditionals where appropriate to prevent the compiler from optimizing
the legacy mode out
2) Enforce unconditional update of IDs on context switch for the
non-optimized v1 mode
3) Enforce update of IDs in the pre signal delivery path for the
non-optimized v1 mode
4) Enforce update of IDs in the membarrier(RSEQ) IPI for the
non-optimized v1 mode
5) Make time slice and future extensions depend on optimized v2 mode
This brings back the full performance problems, but preserves the v2
optimization code and for generic entry code using architectures also the
TIF_RSEQ optimization which avoids a full evaluation of the exit to user
mode loop in many cases.
Fixes: 566d8015f7ee ("rseq: Avoid CPU/MM CID updates when no event pending")
Reported-by: Mathias Stearn <mathias@mongodb.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Closes: https://lore.kernel.org/CAHnCjA25b+nO2n5CeifknSKHssJpPrjnf+dtr7UgzRw4Zgu=oA@mail.gmail.com
Link: https://patch.msgid.link/20260428224427.517051752%40kernel.org
Cc: stable@vger.kernel.org
|
|
During Function Level Reset recovery, the MANA driver reads
hardware BAR0 registers that may temporarily contain garbage values.
The SHM (Shared Memory) offset read from GDMA_REG_SHM_OFFSET is used
to compute gc->shm_base, which is later dereferenced via readl() in
mana_smc_poll_register(). If the hardware returns an unaligned or
out-of-range value, the driver must not blindly use it, as this would
propagate the hardware error into a kernel crash.
The following crash was observed on an arm64 Hyper-V guest running
kernel 6.17.0-3013-azure during VF reset recovery triggered by HWC
timeout.
[13291.785274] Unable to handle kernel paging request at virtual address ffff8000a200001b
[13291.785311] Mem abort info:
[13291.785332] ESR = 0x0000000096000021
[13291.785343] EC = 0x25: DABT (current EL), IL = 32 bits
[13291.785355] SET = 0, FnV = 0
[13291.785363] EA = 0, S1PTW = 0
[13291.785372] FSC = 0x21: alignment fault
[13291.785382] Data abort info:
[13291.785391] ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000
[13291.785404] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[13291.785412] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[13291.785421] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000014df3a1000
[13291.785432] [ffff8000a200001b] pgd=1000000100438403, p4d=1000000100438403, pud=1000000100439403, pmd=0068000fc2000711
[13291.785703] Internal error: Oops: 0000000096000021 [#1] SMP
[13291.830975] Modules linked in: tls qrtr mana_ib ib_uverbs ib_core xt_owner xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_compat nf_tables cfg80211 8021q garp mrp stp llc binfmt_misc joydev serio_raw nls_iso8859_1 hid_generic aes_ce_blk aes_ce_cipher polyval_ce ghash_ce sm4_ce_gcm sm4_ce_ccm sm4_ce sm4_ce_cipher hid_hyperv sm4 sm3_ce sha3_ce hv_netvsc hid vmgenid hyperv_keyboard hyperv_drm sch_fq_codel nvme_fabrics efi_pstore dm_multipath nfnetlink vsock_loopback vmw_vsock_virtio_transport_common hv_sock vmw_vsock_vmci_transport vmw_vmci vsock dmi_sysfs ip_tables x_tables autofs4
[13291.862630] CPU: 122 UID: 0 PID: 61796 Comm: kworker/122:2 Tainted: G W 6.17.0-3013-azure #13-Ubuntu VOLUNTARY
[13291.869902] Tainted: [W]=WARN
[13291.871901] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 01/08/2026
[13291.878086] Workqueue: events mana_serv_func
[13291.880718] pstate: 62400005 (nZCv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
[13291.884835] pc : mana_smc_poll_register+0x48/0xb0
[13291.887902] lr : mana_smc_setup_hwc+0x70/0x1c0
[13291.890493] sp : ffff8000ab79bbb0
[13291.892364] x29: ffff8000ab79bbb0 x28: ffff00410c8b5900 x27: ffff00410d630680
[13291.896252] x26: ffff004171f9fd80 x25: 000000016ed55000 x24: 000000017f37e000
[13291.899990] x23: 0000000000000000 x22: 000000016ed55000 x21: 0000000000000000
[13291.904497] x20: ffff8000a200001b x19: 0000000000004e20 x18: ffff8000a6183050
[13291.908308] x17: 0000000000000000 x16: 0000000000000000 x15: 000000000000000a
[13291.912542] x14: 0000000000000004 x13: 0000000000000000 x12: 0000000000000000
[13291.916298] x11: 0000000000000000 x10: 0000000000000001 x9 : ffffc45006af1bd8
[13291.920945] x8 : ffff000151129000 x7 : 0000000000000000 x6 : 0000000000000000
[13291.925293] x5 : 000000015f214000 x4 : 000000017217a000 x3 : 000000016ed50000
[13291.930436] x2 : 000000016ed55000 x1 : 0000000000000000 x0 : ffff8000a1ffffff
[13291.934342] Call trace:
[13291.935736] mana_smc_poll_register+0x48/0xb0 (P)
[13291.938611] mana_smc_setup_hwc+0x70/0x1c0
[13291.941113] mana_hwc_create_channel+0x1a0/0x3a0
[13291.944283] mana_gd_setup+0x16c/0x398
[13291.946584] mana_gd_resume+0x24/0x70
[13291.948917] mana_do_service+0x13c/0x1d0
[13291.951583] mana_serv_func+0x34/0x68
[13291.953732] process_one_work+0x168/0x3d0
[13291.956745] worker_thread+0x2ac/0x480
[13291.959104] kthread+0xf8/0x110
[13291.961026] ret_from_fork+0x10/0x20
[13291.963560] Code: d2807d00 9417c551 71000673 54000220 (b9400281)
[13291.967299] ---[ end trace 0000000000000000 ]---
Disassembly of mana_smc_poll_register() around the crash site:
Disassembly of section .text:
00000000000047c8 <mana_smc_poll_register>:
47c8: d503201f nop
47cc: d503201f nop
47d0: d503233f paciasp
47d4: f800865e str x30, [x18], #8
47d8: a9bd7bfd stp x29, x30, [sp, #-48]!
47dc: 910003fd mov x29, sp
47e0: a90153f3 stp x19, x20, [sp, #16]
47e4: 91007014 add x20, x0, #0x1c
47e8: 5289c413 mov w19, #0x4e20
47ec: f90013f5 str x21, [sp, #32]
47f0: 12001c35 and w21, w1, #0xff
47f4: 14000008 b 4814 <mana_smc_poll_register+0x4c>
47f8: 36f801e1 tbz w1, #31, 4834 <mana_smc_poll_register+0x6c>
47fc: 52800042 mov w2, #0x2
4800: d280fa01 mov x1, #0x7d0
4804: d2807d00 mov x0, #0x3e8
4808: 94000000 bl 0 <usleep_range_state>
480c: 71000673 subs w19, w19, #0x1
4810: 54000200 b.eq 4850 <mana_smc_poll_register+0x88>
4814: b9400281 ldr w1, [x20] <-- **** CRASHED HERE *****
4818: d50331bf dmb oshld
481c: 2a0103e2 mov w2, w1
...
From the crash signature x20 = ffff8000a200001b, this address
ends in 0x1b which is not 4-byte aligned, so the 'ldr w1, [x20]'
instruction (readl) triggers the arm64 alignment fault (FSC = 0x21).
The root cause is in mana_gd_init_vf_regs(), which computes:
gc->shm_base = gc->bar0_va + mana_gd_r64(gc, GDMA_REG_SHM_OFFSET);
The offset is used without any validation. The same problem exists
in mana_gd_init_pf_regs() for sriov_base_off and sriov_shm_off.
Fix this by validating all offsets before use:
- VF: check shm_off is within BAR0, properly aligned to 4 bytes
(readl requirement), and leaves room for the full 256-bit
(32-byte) SMC aperture.
- PF: check sriov_base_off is within BAR0, aligned to 8 bytes
(readq requirement), and leaves room to safely read the
sriov_shm_off register at sriov_base_off + GDMA_PF_REG_SHM_OFF.
Then check sriov_shm_off leaves room for the full SMC aperture.
All arithmetic uses subtraction rather than addition to avoid
integer overflow on garbage values.
Define SMC_APERTURE_SIZE (32 bytes, derived from the 256-bit aperture
width)
Return -EPROTO on invalid values. The existing recovery path in
mana_serv_reset() already handles -EPROTO by falling through to PCI
device rescan, giving the hardware another chance to present valid
register values after reset.
Fixes: 9bf66036d686 ("net: mana: Handle hardware recovery events when probing the device")
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/afQUMClyjmBVfD+u@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When considering both NPCA and DBE, it can appear that the
NPCA configuration is invalid, e.g. for an 80 MHz BSS channel
with DBE to 160 MHz:
| primary channel
| NPCA primary channel
| |
V V
| p | | n | | | | | |
| BSS channel |
| DBE channel |
Now the NPCA primary channel is in the same half as the primary
channel, and the NPCA puncturing bitmap could be completely
invalid as a puncturing bitmap when considering the overall
channel.
Split out the validity checks from cfg80211_chandef_valid() to
a new cfg80211_chandef_npca_valid() function that just checks
the NPCA configuration against the BSS chandef.
Link: https://patch.msgid.link/20260428112708.1225df131557.If3a6afadcce05d215b72fd82175f72373a0f6d24@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the device is capable, parse the AP chandef with NPCA.
Also advertise the other NPCA operational parameters to the
underlying driver and track if they change (though not with
BSS critical update etc. yet)
Since NPCA can only be enabled when the chanctx isn't shared,
the channel context code needs to clear/set npca.enabled in
the per-link configuration, except during association since
we can't enable NPCA before having completed association. In
this case, set npca.enabled during the association process.
Link: https://patch.msgid.link/20260428112708.eb1e42c0b6d7.I0acd8445d4600363afb8430922531450399d0fab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When two interfaces share a channel context, disable NPCA
unless both are AP interfaces that require NPCA. This way,
two AP interfaces can have identical chandefs set up and
share the channel context, but any non-APs cannot share a
chanctx with NPCA (they'd almost certainly have different
BSS color.)
This doesn't mean the chanctx cannot be shared but rather
that NPCA will be disabled on the shared channel context.
Link: https://patch.msgid.link/20260428112708.3832e15f4e78.I08a7c7f47d796f4d5d8f9a682c1fba37db2e4cf5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a cfg80211_chandef_add_npca() helper function that takes an
existing chandef without NPCA and sets the NPCA information from
the format used in UHR operation and UHR Parameters Update.
Link: https://patch.msgid.link/20260428112708.5cdc4e69a306.I95d396ac671da438f340b1afb735ebfe33164894@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the necessary fields to the chandef data structure
to represent NPCA (the NPCA primary channel and NPCA
punctured/disabled subchannels bitmap), and the code
to check these for validity, compatibility, as well as
allowing it to be passed for AP mode for capable
devices.
Compatibility is assumed to only be the case when it's
actually identical, enabling later management of this
in channel contexts in mac80211 for multiple APs, but
requiring userspace to set up the identical chandef on
all AP interfaces that share a channel (and BSS color.)
Link: https://patch.msgid.link/20260428112708.46f3872aeb35.I85888dab88a6659ba52db4b3318979ca5bcfc0c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For UHR, multi-link power-management capability lives there, and
so it's needed that hostapd knows what to advertise, and clients
should have it shown to userspace for information.
Repurpose the existing NL80211_ATTR_ASSOC_MLD_EXT_CAPA_OPS by
renaming it to NL80211_ATTR_EXT_MLD_CAPA_AND_OPS (with a define
for compatibility) and advertise the capabilities.
We can also later use the value, if needed, to set per-station
capabilities on STAs added to AP interfaces.
Link: https://patch.msgid.link/20260428110915.e808e70feed6.I378a7c017bfc1ebb072fa8d5d1db2ac9b45596c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
