| Age | Commit message (Collapse) | Author |
|---|
|
The generated server-side decoder and encoder for a void procedure
argument or result are named after the RPC program (for example,
nfs_svc_decode_void). xdrgen derives that prefix from the program
name alone, not the version, so two versions of one program built
into the same module emit the identical symbol. NFSv2 and NFSv3
both declare program NFS_PROGRAM; once both are converted, fs/nfsd
fails to link with multiple definitions of nfs_svc_decode_void and
nfs_svc_encode_void.
A void handler carries no program- or version-specific behavior:
each merely forwards to xdrgen_decode_void() or xdrgen_encode_void().
Define one shared pair, xdrgen_svc_decode_void() and
xdrgen_svc_encode_void(), in the xdrgen builtins, and stop the
program generator from emitting a per-program void handler.
lockd is the one in-tree consumer that already emits per-program
void handlers, so regenerate the NLMv3 and NLMv4 XDR code to drop
nlm_svc_{decode,encode}_void() and nlm4_svc_{decode,encode}_void()
and point both procedure tables at the shared handlers. The shared
handlers are identical to the generated ones they replace, so no
wire behavior changes.
Only the server (svc) handlers are affected. The client-side void
stubs remain static and per-program, so they do not collide.
Link: https://patch.msgid.link/20260712193122.116845-3-cel@kernel.org
Signed-off-by: Chuck Lever <cel@kernel.org>
|
|
Clean up.
The declaration templates for structs, pointers, and typedefs each
begin with a blank line, which keeps successive declarations and the
include block above them visually separated. The enum declaration
template omits that blank line. trim_blocks collapses the template's
lone comment line to nothing, so the omission stayed invisible as
long as every generated header happened to lead with a non-enum
declaration.
Fixes: 4329010ad9c3 ("xdrgen: Address some checkpatch whitespace complaints")
Link: https://patch.msgid.link/20260712193122.116845-2-cel@kernel.org
Signed-off-by: Chuck Lever <cel@kernel.org>
|
|
Now that the pool mode is always pernode, svc_serv.sv_nrpools is
redundant with sv_is_pooled: an unpooled service always has a single
pool, and a pooled service has svc_pool_map.npools pools (which is one on
a single-node host). sv_nrpools cannot distinguish an unpooled service
from a pooled service that happens to have one pool, so it is sv_nrpools,
not sv_is_pooled, that carries no unique information.
Replace the cached field with a svc_serv_nrpools() helper that derives
the count from sv_is_pooled and the pool map, and convert all readers to
it. svc_pool_map is file-local to svc.c, so export the helper for the
svc_xprt.c and nfsd callers.
Reading svc_pool_map.npools without svc_pool_map_mutex is safe: the
mutex protects only svc_pool_map.count, and npools is already read
locklessly in svc_pool_for_cpu().
A pooled service holds a map reference for its whole lifetime, so npools
is stable while any reader could observe it. The hot path
(svc_pool_for_cpu()) already dereferences svc_pool_map for to_pool, and
npools shares that cacheline, so there is no new locking or coherence
cost.
__svc_create() keeps using its local npools argument for the sv_pools[]
allocation, since sv_is_pooled is not set until svc_create_pooled() has
returned from it.
Doing this also removes a modulus operation from svc_pool_for_cpu(),
which should make for more efficient RPC queueing.
Assisted-by: Claude:claude-opus-4-8
Suggested-by: NeilBrown <neilb@ownmail.net>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260706-sunrpc-pool-mode-v5-5-6c4ee7cd89aa@kernel.org
Signed-off-by: Chuck Lever <cel@kernel.org>
|
|
The checked-in NLMv4 xdrgen output predates the addition of enum
value validation to generated decoders. As a result the decoders for
fsh4_mode, fsh4_access, and nlm4_stats still accept any 32-bit value,
while the current generator rejects values outside the enumeration.
Resync the generated files with the in-tree xdrgen by regenerating
from the unchanged nlm4.x specification.
This is a plain regeneration with no specification change; it also
refreshes the recorded specification modification time to show that
all existing enum decoders have picked up the xdrgen tool fix.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260630155638.874492-1-cel@kernel.org
Signed-off-by: Chuck Lever <cel@kernel.org>
|
|
RFC8881bis adds some new flags to GET_DIR_DELEGATION that later patches
will consume. In particular, Linux nfsd can't easily provide info about
directory cookies and ordering. The new flags allow it to omit that
information.
There is some risk here -- RFC8881bis is still a working group document,
and has been for years. The changes to directory delegations have been
stable for the last year or so however, so the hope is that those parts
won't change (much).
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260616-dir-deleg-v7-3-6cbc7eac0ade@kernel.org
Signed-off-by: Chuck Lever <cel@kernel.org>
|
|
Add the necessary bits to nfs4_1.x and remove the duplicate definitions
from nfs4.h and the uapi nfs4 header. Regenerate the xdr files.
Note that regenerating these files caused conflicts with the definitions
of NFS4_VERIFIER_SIZE and NFS4_FHSIZE in include/uapi/linux/nfs4.h.
These constants are defined by the RFC, and are not part of the kernel
API. They have been removed. Userspace consumers who require those
constants should plan to get them from more authoritative sources.
The nfsstat4 enum defined in the .x is fed to the xdrgen-generated wire
encoder and decoder, which treat every enumerated value as legal on the
wire. Do not carry the NFS4ERR_FIRST_FREE sentinel (which is not a
protocol error code) into the .x; keeping it would make 10097 a value
that could leak onto the wire. Instead base nfsd's internal error codes
(NFSERR_EOF and friends) at an impossible nfsstat4 value, as lockd does
for its nlm__int__* status codes.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260616-dir-deleg-v7-2-6cbc7eac0ade@kernel.org
Signed-off-by: Chuck Lever <cel@kernel.org>
|
|
nlmsvc_ops is published by nfsd_lockd_init() and cleared by
nfsd_lockd_shutdown() with plain stores, while lockd dereferences
it unguarded from dispatch sites in fs/lockd/svcsubs.c. The pointer
targets nfsd's .rodata and the fopen/fclose callbacks live in nfsd's
.text, so a stale load after rmmod nfsd results in either a NULL
deref or a module-text use-after-free.
Declare nlmsvc_ops as __rcu, publish via rcu_assign_pointer(), clear
via RCU_INIT_POINTER() + synchronize_rcu(). Add a struct module
*owner field to nlmsvc_binding and pin the module across indirect
calls with try_module_get/module_put. When the binding is torn down,
fall back to fput() to avoid leaking struct file references.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260611-nfsd-testing-v2-16-5b90e276f2d9@kernel.org
Signed-off-by: Chuck Lever <cel@kernel.org>
|
|
A pooled RPC service sizes its threads dynamically, growing and
shrinking each pool between its minimum and maximum bounds as load
varies. The count of running threads therefore reflects recent
demand, not the service's capacity. A consumer that sizes a data
structure against the concurrency the service can sustain -- NFSD's
NFSv4 session slot tables, for one -- needs that stable ceiling, and
computing it means summing sp_nrthrmax across every pool.
Add svc_serv_maxthreads() so the summation, and its dependence
on the layout of struct svc_serv and struct svc_pool, stays within
sunrpc. The read is lock-free: pool maxima change only when a service
is reconfigured, a path callers already serialize against startup and
shutdown, so a racing reader observes at worst a transient value. This
is acceptable for the sizing heuristics that will consume it.
nfsd_nrthreads() already sums sp_nrthrmax across pools by hand; convert
it to svc_serv_maxthreads(), giving the new export an in-tree consumer
and removing a copy of the dependence on svc_serv internals.
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@hammerspace.com>
Link: https://patch.msgid.link/20260610-nfsd-slot-growth-clamp-v1-1-7b966700df0b@kernel.org
Signed-off-by: Chuck Lever <cel@kernel.org>
|
|
A backchannel receive can complete a request while the NFS callback
service is being torn down. xprt_complete_bc_request() removes the
request from bc_pa_list, drops bc_alloc_count, marks the request in use,
and then asks xprt_enqueue_bc_request() to hand it to the callback
service.
If teardown has already cleared xprt->bc_serv, xprt_enqueue_bc_request()
currently returns without enqueueing or freeing the committed request.
The xprt_get() taken on entry is leaked as well. If the producer wins
the race before bc_serv is cleared, it can also enqueue onto sv_cb_list
after nfs_callback_down() has stopped the callback threads, leaving the
request linked to a svc_serv that is about to be freed.
Close the producer side before callback threads are stopped. Add
xprt_svc_shutdown_bc() to clear xprt->bc_serv under bc_pa_lock, and call
it on callback shutdown and callback-start failure before stopping the
service threads. Requests that lose the NULL transition in
xprt_enqueue_bc_request() are released through the normal backchannel
free path after balancing bc_slot_count. Finally, drain any remaining
sv_cb_list requests after the callback threads have stopped and before
svc_destroy() frees the service.
Fixes: 441244d4273a ("SUNRPC: cleanup common code in backchannel request")
Fixes: 9e9fdd0ad0fb ("NFSv4.1: protect destroying and nullifying bc_serv structure")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Mason <clm@meta.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260528-tier2-v1-6-d026a1415e0b@oracle.com
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Originally, the ct expectation support called nf_ct_helper_ext_add() for
confirmed conntracks, which is invalid, triggering a splat. This was
fixed by commit 1710eb913bdc ("netfilter: nft_ct: skip expectations for
confirmed conntrack") which restricted it to unconfirmed conntracks.
However, early insertion of expectations into the expectations list when
the conntrack is unconfirmed leads to stale entries pointing to the
wrong hlist_head through .pprev due to ct extension reallocation.
Commit 7c9664351980 ("netfilter: move nat hlist_head to nf_conn") moved
the nat hlist_head to nf_conn for this reason:
1. ...
2. When reallocation of extension area occurs we need to fixup the
bysource hash head via hlist_replace_rcu.
I'd rather not increase the size of the struct nf_conn for this feature
has very limited scope: only one expectation can be created at a time
given expect_clash() will make nf_ct_expect_related() reports EBUSY.
For this reason, relax nf_ct_expect_related() not to drop packets in
case expectation creation fails, therefore, expectation creation becomes
best effort.
To address this issue, add an internal ct helper and attach it to the
conntrack entry to streamline the custom ct expectation support with
existing ct helpers.
Expose a new nf_conntrack_helper_release() function to release the
internal helper that is allocated and attached to the conntrack entry to
create the custom expectations. The nft_ct module removal always waits
for rcu grace period, then the NULL helper callback is observed after
this.
This patch also restricts the creation of expectations to different
helpers other than this custom helper that is created for this type of
expectations.
Fixes: 857b46027d6f ("netfilter: nft_ct: add ct expectations support")
Reported-by: Jaeyeong Lee <iostreampy@proton.me>
Link: https://patch.msgid.link/20260715144755.00ea7dfcd9f@proton.me
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This field refers to the inner protocol that is encapsulated by the
tunnel header, just a comestic change. No functional changes are
expected.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add an ether_type field to struct net_device_path_ctx to reject IPv4
over IPv6 and vice-versa, this is currently not support. Otherwise,
incorrect dst_entry family can be reached from datapath.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Refactor dev_fill_forward_path() to take a struct net_device_path_ctx
pointer instead of a (dev, daddr) pair, so the caller can build and
populate the context up front and keep it after the forward path walk.
This allows additional fields (e.g. vlan and ether_type) to be carried
in the context and shared with ndo_fill_forward_path implementations,
instead of being reconstructed on the stack inside the core helper.
Update the mtk_ppe_offload, airoha_ppe and nf_flow_table_path callers to
allocate and fill the context before invoking dev_fill_forward_path().
The network topology resolution behaviour is unchanged.
This is a preliminary patch to enable HW flowtable offload for IPv4
over IPv6 tunnels.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Trigger a warning if nf_ct_set() overlaps an existing ct object leading
to refcount leak. Add this warning to skb_set_nfct() whose only user is
nf_ct_set() instead.
Update existing nf_ct_set() callers to use nf_reset_ct() first to clean
up stale pointer to conntrack object which migh trigger false positive
warnings.
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal driver updates for 7.3-rc1 from Daniel Lezcano:
"- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval on
Airoha (Christian Marangi)
- Make use of the regmap API in order to support the Airoha AN7583
(Christian Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in an OF code comment (Marek Vasut)
- Remove unecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxialiary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property in
the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled with the resume operation fails on Qoriq
(Can Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after the
clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
* tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
thermal/drivers/imx: Disable clock on runtime resume failure
thermal/drivers/qcom-spmi-adc-tm5: Drop IIO_VAL_INT check in adc_tm5_get_temp
thermal/drivers/airoha: Add support for AN7583 Thermal Sensor
dt-bindings: arm: airoha: Add the chip-scu node for AN7583 SoC
thermal/drivers/airoha: Generalize get_thermal_ADC and set_mux function
thermal/drivers/airoha: Generalize probe function
...
|
|
Merge updates related to the ACPI video bus driver for 7.3-rc1:
- Introduce helper function acpi_dev_is_video_device() and use it in
the core ACPI device enumeration code, in the ACPI video bus driver,
in the ACPI support code for I2C, in the PCI VGA driver, and in the
x86 platform thinkpad_acpi driver (Andy Shevchenko)
- Add a quirk to use the native backlight on Acer Nitro AN515-46 to the
ACPI video bus driver (Marcos Paulo Medeiros)
- Release PCI device reference after lookup in video_detect_portege_r100()
in the ACPI video bus driver (Yuho Choi)
* acpi-video:
ACPI: video: Release PCI device reference after lookup
ACPI: video: force native backlight on Acer Nitro AN515-46
platform/x86: thinkpad_acpi: Convert to use acpi_dev_is_video_device() helper
PCI/VGA: Convert to use acpi_dev_is_video_device() helper
i2c: acpi: Convert to use acpi_dev_is_video_device() helper
ACPI: video: Convert to use acpi_dev_is_video_device() helper
ACPI: scan: Convert to use acpi_dev_is_video_device() helper
ACPI: utils: Introduce acpi_dev_is_video_device() helper
|
|
Merge an ACPI device enumeration core code update, ACPI support updates
related to PCI, an ACPI Time and Alarm Device (TAD) driver update and
ACPI APEI updates for 7.3-rc1:
- Avoid registering platform devices with resource overlaps in the ACPI
core device enumeration code (Rafael Wysocki)
- Clear driver_data on all paths that free acpi_pci_root in
acpi_pci_root_add() (Chen Pei)
- Simplify acpi_get_pci_dev() with the help of a mutex guard, introduce
acpi_dev_get_pci_dev() for code that has a struct ACPI device for
which it wants to get the struct pci_dev pointer of the associated
PCI device, and use it in the ACPI video bus driver (Rafael Wysocki)
- Avoid printing confusing _OSC messages for non-PCIe host bridges
without _OSC which is a valid configuration (Kazuma Kondo)
- Add locking around evaluation of ACPI control methods in the ACPI TAD
driver to avoid race conditions (Rafael Wysocki)
- Handle repeated SEA error storms in APEI (Junhao He)
- Fix ERST timeout unit conversion in APEI (Nirmoy Das)
- Fix ARM section length accounting after header in the ACPI APEI GHES
driver (TanZheng)
- Mark ghes_in_nmi_spool_from_list() as maybe unused (Rui Qi)
* acpi-scan:
ACPI: scan: Avoid registering platform devices with resource overlaps
* acpi-pci:
ACPI: PCI: Avoid misleading _OSC messages for non-PCIe host bridges without _OSC
ACPI: video: Use acpi_dev_get_pci_dev() instead of acpi_get_pci_dev()
ACPI: video: Drop backlight parent device reference later
ACPI: PCI: Introduce acpi_dev_get_pci_dev()
ACPI: PCI: Use a mutex guard to simplify acpi_get_pci_dev()
ACPI: PCI: Clear driver_data on all paths that free the acpi_pci_root
* acpi-tad:
ACPI: TAD: Add locking around AML evaluations
* acpi-apei:
ACPI: APEI: Handle repeated SEA error storms
ACPI: APEI: Fix ERST timeout unit conversion
ACPI: APEI: GHES: fix ARM section length accounting after header
ACPI: APEI: GHES: Mark ghes_in_nmi_spool_from_list() as maybe unused
|
|
With the changes that enable preempt count to track IRQ disabling
nesting, we don't have enough bits in 32-bit preempt count
implementation, as a result we move NMI nesting bits out of the 32-bit
preempt count. However on the architectures that can support 64-bit
preempt count implementation, we can keep the NMI nesting bits in the
32-bit preempt count and avoid maintaining NMI nesting bits outside of
the same cache line.
Therefore HAS_SEPARATE_PREEMPT_RESCHED_BITS is introduced to allow
architectures to select this. Note that under this Kconfig, preempt
count is maintained in a 64-bit word however preempt_count() still
remains as an int because all the effective bits still fit in
(previously we mask out NEED_RESCHED bit in preempt_count()). This
should make no functional changes for existing preempt_count() users.
Enable this for x86_64 along with the introduction of the Kconfig.
[boqun: Undo the __preempt_count_{add,sub}() optimization in 32-bit
preempt count since it may introduce {over,under}flow]
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-11-boqun@kernel.org
|
|
The preempt_offset is always 0 in all the callsites of __cant_sleep(),
hence remove it. It also allows us to clear up the code a bit by
no longer using a "preempt_count() > .." comparison.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-9-boqun@kernel.org
|
|
The semantics of various IRQ disabling guards match what
*_irq_{disable,enable}() provide, i.e. the interrupt disabling is
properly nested, therefore it's OK to switch to use
*_irq_{disable,enable}() primitives.
[boqun: Adjust the user-side changes in do_sched_cfs_*_timer() provided
by Peter and Lyude]
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-8-boqun@kernel.org
|
|
Currently the nested interrupt disabling and enabling is represented by
_irqsave() and _irqrestore() APIs, which are relatively unsafe, for
example:
<interrupts are enabled as beginning>
spin_lock_irqsave(l1, flag1);
spin_lock_irqsave(l2, flag2);
spin_unlock_irqrestore(l1, flags1);
<l2 is still held but interrupts are enabled>
// accesses to interrupt-disable protected data will cause races
This is even easier to trigger with guard facilities:
unsigned long flag2;
scoped_guard(spin_lock_irqsave, l1) {
spin_lock_irqsave(l2, flag2);
}
// l2 locked but interrupts are enabled.
spin_unlock_irqrestore(l2, flag2);
(Hand-to-hand locking critical sections are not uncommon for a
fine-grained lock design)
And because of this unsafety, Rust cannot easily wrap the
interrupt-disabling locks in a safe API, which complicates the design.
To resolve this, introduce a new set of interrupt disabling APIs:
* local_interrupt_disable();
* local_interrupt_enable();
They work like local_irq_save() and local_irq_restore() except that 1)
the outermost local_interrupt_disable() call saves the interrupt state
into a per-CPU variable, so that the outermost local_interrupt_enable()
can restore the state, and 2) a per-CPU counter is added to record the
nest level of these calls, so that interrupts are not accidentally
enabled inside the outermost critical section.
Also add the corresponding spin_lock primitives: spin_lock_irq_disable()
and spin_unlock_irq_enable(), as a result, code as follows:
spin_lock_irq_disable(l1);
spin_lock_irq_disable(l2);
spin_unlock_irq_enable(l1);
// Interrupts are still disabled.
spin_unlock_irq_enable(l2);
doesn't have the issue that interrupts are accidentally enabled.
This also makes the wrapper of interrupt-disabling locks on Rust easier
to design.
[boqun: Apply Peter's feedback and fix spell errors reported by Ingo]
[boqun: Address the duplicate spin_acquire() spotted by sashiko]
Co-developed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804182657.87716-1-boqun@kernel.org
|
|
soc/drivers
arm64: Xilinx SOC changes for 7.3
firmware:
- Feature check improvements
- Clean up firmware and EL3 state on kexec
soc:
- Remove redundant dev_err()
* tag 'zynqmp-soc-for-7.3' of https://github.com/Xilinx/linux-xlnx:
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
soc: xilinx: Remove redundant dev_err()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
It isn't obvious what false/true mean at the definition sites, so let's
replace it with flags instead. Also flip the polarity to make the
default zero-initialized value be the secure (privileged-only) value.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix the misspelling of 'validate' in crypto_ecdh_shared_secret() and
ecc_is_pubkey_valid_partial() documentation.
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use plain C "/*" notation for comments that are not in kernel-doc format
to avoid kernel-doc warnings:
Warning: include/uapi/linux/psp-sfs.h:18 expecting prototype for SFS().
Prototype was for PAYLOAD_NAME_SIZE() instead
Warning: include/uapi/linux/psp-sfs.h:46 This comment starts with '/**',
but isn't a kernel-doc comment.
* Seamless Firmware Support (SFS) IOC
Fixes: 648dbccc03a0 ("crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers
FSL SOC Changes for 7.3
Freescale QUICC Engine:
- Use generic I/O helpers in interrupt controller for IO Ports
- Move CONFIG_QE_GPIO out of powerpc
- Fix DT scan for GPIO nodes
- Convert IO ports interrupt controller to generic IRQ chip
- Add support of IRQs in GPIO controller
- Implement get_direction() in GPIO controller
- Check platform_driver_register() in interrupt controller for IO Ports
Data Path I/O:
- Replace maintainer
- Remove redundant dev_err()
- Fix kernel-doc typos
Freescale Management Complex:
- Use strscpy() to copy strings into arrays
- Remove redundant dev_err()
- Drop unused assignment of acpi_device_id::driver_data
Other changes:
- Add kernel and device tree binding support for RCW override,
completing the SerDes PHY driver functionality
- Fix kernel-doc warnings and typos in DPAA header
* tag 'soc_fsl-7.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: (31 commits)
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
soc: fsl: guts: use a macro to encode the DCFG CCSR space
soc: fsl: guts: perform fsl_guts_init() error teardown in reverse order of setup
soc: fsl: dpio: fix kernel-doc typos
soc: fsl: fix kernel-doc warnings and typos
bus: fsl-mc: Remove redundant dev_err()
soc: fsl: qe: Add support of IRQs in QE GPIO
soc: fsl: qe: Rename irq variable to parent_irq
soc: fsl: qe: Convert to generic IRQ chip
soc: fsl: qe: Handle spurious interrupts
soc: fsl: qe: Iterate over all pending interrupts in cascade handler
soc: fsl: qe: Use generic_handle_domain_irq()
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Some BIOS already provides config options to expose/hide VT-d units
as a whole to/from system software. A new demand is to allow exposing
VT-d units but requesting system software to disable DMA remapping
while sustaining interrupt remapping. This can be communicated now by
setting the new DMA_REMAP_OPT_OUT flag bit in the DMAR table, as
introduced in VT-d spec v5.2 (section 8.1, DMA Remapping Reporting
Structure).
Introduce a new off policy (DMAR_FW_OFF) for DMA_REMAP_OPT_OUT. As
the strongest off policy, it cannot be overridden by user opts or
any force_on types. If tboot is enabled in the meantime, kernel will
panic. It is user responsibility to configure BIOS properly.
One cleanup is left for future - the DMAR flag is parsed multiple
times, in detect_intel_iommu(), dmar_platform_optin() (which can be
called at run-time), etc. Caching it is a cleaner way.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v7.3
Add SMEM parsing for DDR configuration data and use its highest bank
address bit to select the appropriate UBWC configuration.
Enable generic PAS trusted-zone APIs for the Iris and Venus media drivers.
Fix SCM probe retry state, reserved-memory cleanup, and an early IRQ-handler
NULL dereference. Enable QSEECOM EFI variable access on the Asus Zenbook A16.
Correct GENI firmware-size validation using the hardware CFG RAM depth and
correct the PMIC GLINK Thunderbolt extradata layout.
Document the Nord AOSS side channel and the IMEM minidump SRAM property.
Clean up Qualcomm statistics macros and the WCNSS binding schema.
* tag 'qcom-drivers-for-7.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
media: qcom: Switch to generic PAS TZ APIs
dt-bindings: soc: qcom,aoss-qmp: Document Nord AOSS side channel
dt-bindings: sram: qcom,imem: Add minidump-sram pattern property
soc: qcom: qcom_stats: Replace CLIENT_VOTES_OFFSET macro with sizeof()
soc: qcom: qcom_stats: Remove unused macro definitions
soc: qcom: ubwc: Get HBB from SMEM
soc: qcom: smem: Expose DDR data from SMEM
soc: qcom: smem: Use 'unsigned int' instead of 'unsigned'
firmware: qcom: scm: Fix tzmem state on probe retry
firmware: qcom: scm: Fix reserved memory cleanup on probe failure
firmware: qcom: scm: Fix NULL dereference in IRQ handler before __scm is published
firmware: qcom: scm: Allow QSEECOM on Asus Zenbook A16 (UX3607OA)
soc: qcom: geni-se: Use HW PROG_RAM_DEPTH to validate firmware size
soc: qcom: pmic_glink_altmode: Define the TBT extradata properly
dt-bindings: soc: qcom,wcnss: Drop redundant $ref of firmware-name property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
__exit_to_user_mode_loop() invokes rseq_grant_timeslice_extension() with
interrupts enabled. If the extension is granted it invokes
hrtimer_rearm_deferred_tif() to ensure that a pending deferred hrtimer
rearm is handled before exiting to user space.
Though this invokes __hrtimer_rearm_deferred() which expects to be invoked
with interrupts disabled as it takes hrtimer_cpu_base::lock with
raw_spin_lock(). That's a livelock waiting to happen and caught by lockdep:
WARNING: ./include/linux/hrtimer_rearm.h:17 at irqentry_exit, CPU#1: slice_test
WARNING: inconsistent lock state
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
Prevent this by disabling interrupts around the invocation of
hrtimer_rearm_deferred_tif() in rseq_grant_timeslice_extension().
[ tglx: Massaged change log ]
Fixes: 15dd3a948855 ("hrtimer: Push reprogramming timers into the interrupt return path")
Signed-off-by: Niels Pressel <npressel@ethz.ch>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260802124423.51616-1-npressel@ethz.ch
|
|
During a kexec restart, only the kernel is reloaded but notifier callbacks
in firmware persist, causing state mismatches between kernel and firmware.
To address this, introduce PM_ALL_NOTIFIERS node ID to unregister all
notifier callbacks during kexec. On a graceful kexec restart, this occurs
in zynqmp_firmware_shutdown(). On a crash kernel restart, it happens in
zynqmp_firmware_probe() in the reloaded kernel.
Unregistering all notifiers depends on firmware support for the
PM_ALL_NOTIFIERS node ID. On firmware that does not implement it (the
feature check reports a version below PM_API_VERSION_3) the step is
skipped and a warning such as "Firmware doesn't support unregister all
notifiers at once" is logged, e.g. on Versal NET firmware that predates
this API.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Link: https://patch.msgid.link/20260729122522.3732875-4-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
During a kexec restart, only the kernel is reloaded while devices
allocated in firmware persist, causing state mismatches between the
kernel and firmware.
Introduce PM_DEV_ALL_PERIPH node ID (0x18224FFFU) to release all
peripheral devices during kexec. On graceful restarts, this happens in
zynqmp_firmware_shutdown(). On crash kernel restarts, it happens in
zynqmp_firmware_probe() of the reloaded kernel.
Releasing all peripherals depends on firmware support for the
PM_DEV_ALL_PERIPH node ID. On firmware that does not implement it (the
feature check reports a version below PM_API_VERSION_3) the release is
skipped and a warning such as "Bulk device release is not supported by
firmware" is logged, e.g. on Versal NET firmware that predates this API.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Link: https://patch.msgid.link/20260729122522.3732875-3-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
Currently, during a kexec restart, only the kernel is reloaded, while
EL3-specific data remain unchanged. This leads to a mismatch between the
kernel state and secure firmware state like SGI number and shutdown scope
variable.
For example, the kernel registers an SGI number with EL3 firmware so that
secure firmware can notify the kernel of events via that SGI. EL3 stores
this SGI number in its internal state. After a kexec, the newly loaded
kernel re-registers and may request a different SGI number, but the stale
value programmed in EL3 remains, so event notifications are delivered on
the old SGI and are missed by the new kernel. The shutdown scope variable
has a similar stale state problem.
To resolve this, the TF_A_CLEAR_PM_STATE PM API is introduced to clear
EL3 PM subsystem state during kexec. On a graceful reboot, this API is
triggered by zynqmp_firmware_shutdown(), while in a crash kernel scenario,
it is invoked by zynqmp_firmware_probe() in the reloaded kernel.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Link: https://patch.msgid.link/20260729122522.3732875-2-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
Use the typedef keyword when describing a typedef.
Add the missing function return value for font_glyph_size().
Warning: include/linux/font.h:84 cannot understand function prototype:
'typedef const unsigned char font_data_t;'
Warning: include/linux/font.h:53 No description found for return value
of 'font_glyph_size'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org # v7.1+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
DRM Rust changes for v7.3-rc1
- I/O (shared from driver-core tree via signed tag rust-io-7.3-rc1):
- Rework of I/O types: make I/O regions typed (with a
dynamically-sized Region type for the existing untyped case), create
view types representing subregions of a mapped I/O region, and add
io_project!() for safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io) with
a blanket implementation, preventing implementers from overriding
provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile access,
and make Coherent implement Io via an I/O view type. Add copying
methods (memcpy_{from,to}io).
- Replace dma_read!/dma_write! with io_read!/io_write!; drop the old
macros.
- DRM:
- RegistrationGuard and RegistrationData:
- Rework DeviceContext typestates: rename Uninit to Normal, add an
Ioctl context, restrict AlwaysRefCounted to Normal for both Device
and GEM Object, and establish a Deref chain from Registered to
Normal.
- Introduce RegistrationGuard, a guard representing a
drm_dev_enter/exit SRCU critical section that proves the DRM
device is registered, which implies the parent bus device is still
bound.
- Add RegistrationData as a GAT on drm::Driver. The data does not
outlive driver unbind, so it can capture lifetime-annotated device
resources and references. Accessible through the guard via a
closure with HRTB lifetime.
- Wrap ioctl dispatch in RegistrationGuard (returning ENODEV if
unplugged) and pass registration data to handlers.
- Add Driver::ParentDevice associated type.
- Fix unbounded lifetimes in ioctl handler arguments.
- Fix a race in drm_dev_register() where a partial failure allowed
in-flight ioctls to proceed while the error path tore down
resources.
- GEM shmem: add DmaResvGuard helper, vmap functions, and sg_table()
accessor.
- GPUVM: require Send + Sync for the driver's associated data,
implement Send and Sync for GpuVaAlloc and GpuVmBo, add SmContext
lifetime bound, update DriverGpuVm for DeviceContext.
- Nova:
- nova-core / nova-drm cross-crate dependency:
- Build nova-core and nova-drm from drivers/gpu/Makefile for build
ordering, export nova-core Rust symbols for nova-drm. Workaround
until the build system supports Rust cross-crate dependencies
natively.
- GSP boot process consolidation:
- Introduce GspBootContext to bundle common boot parameters,
replacing per-argument threading. Separate context and GPU
lifetimes to support mutable borrows of GPU subdevices.
- Turn FWSEC execution into a HAL method, make FWSEC bootloader
usage a property of the TU102 HAL (GA102+ gets its own instance
with it disabled). Move firmware file selection to the GSP HAL.
- Store the Fsp instance in Gpu (lifetime tied to the GPU, not just
a single boot invocation). Move GSP state and unload bundle into a
pinned subobject for reliable teardown on partial init failure.
- Boot GSP with vGPU enabled:
- Add PRC (Product Reconfiguration Control) protocol to query device
configuration from the FSP. Read vGPU mode, detect and store vGPU
state.
- Set RMSetSriovMode registry entry and reserve the larger WPR2 heap
required when vGPU is enabled.
- Build SetRegistry entries dynamically.
- TLV firmware image format:
- Add a TLV (type-length-value) parser for the new firmware image
format. TLV files use unversioned filenames with a .tlv suffix,
start with "NVFW" magic, and contain tagged blocks with 4-byte
aligned payloads.
- Transition all firmware loading (booter, gsp, gen_bootloader, fsp)
to TLV images.
- Note: this requires a development firmware not in linux-firmware
[1]; this is temporary and serves the transition to r615.
- Hopper/Blackwell fixes and cleanups:
- Correct FRTS vidmem offset calculation, split FbLayout into FSP
and non-FSP versions, fix Blackwell flush address composition, use
absolute FBHUB0 flush registers on Blackwell, use correct sysmem
flush registers on Hopper.
- Harden FSP messaging: limit receive allocation size, catch bogus
queue pointers, ensure DMA allocation lifetimes for FMC boot and
LibOS, wait for RISC-V HALTED on unload.
- I/O projection adoption:
- Use io_project!() for PTE array, message queues, and Falcon DMA
transfer bounds checking.
- Misc:
- Keep unloading if FWSEC-SB fails during Turing/Ampere GSP reset.
- Don't declare booter firmware for FSP chipsets.
- Fix packed registry table size.
- Extract and display usable FB regions from GSP.
- Store bar and dev directly in Falcon, simplifying the API.
- Parse VBIOS structs via zerocopy.
- Convert to kernel bitfield macro, remove local one.
- Move register definitions into sub-modules.
- Add FSP and PRC protocol documentation.
- Tyr:
- Firmware loading and MCU boot:
- Add a generic slot manager for dynamically allocating limited
hardware slots to software seats, with lazy eviction under
contention.
- Add MMU support wrapping the slot manager for address-space slot
allocation, with MAIR-to-MEMATTR translation.
- Add GPU virtual memory (VM) support using drm_gpuvm with ARM64
LPAE Stage 1 page tables and 4KB/2MB page sizes.
- Add a kernel buffer object type for internal driver allocations.
- Add a parser for the Mali CSF firmware binary format.
- Add MCU booting: load, parse, and map firmware sections into VM,
then boot the MCU at probe().
- Cross-subsystem:
- Add faux::Device type with AsBusDevice support. Allow retrieving a
bound Device from a Registration.
- Add device lifetime to IoPageTable.
- Add Vec::zeroed method.
- Add firmware::request_into_buf() to load firmware into a
caller-provided buffer.
- Rename dma_handle to dma_address in the DMA abstraction.
- Change pci_sriov_get_totalvfs() return type to unsigned int; add
Rust helper.
[1] https://github.com/ttabi/linux-firmware-nova
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://patch.msgid.link/DKJQQUOS0PVO.3JPR3MYK4PDVZ@kernel.org
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
elan-i2c-ids.h only needs struct acpi_device_id from the ACPI
device ID definitions. The MODULE_DEVICE_TABLE() user already includes
<linux/module.h>.
Include <linux/device-id/acpi.h> instead of the broader
<linux/mod_devicetable.h> header.
Assisted-by: Codex:GPT-5
Signed-off-by: Longlong Xia <xialonglong@kylinos.cn>
Link: https://patch.msgid.link/20260809142928.4031270-1-xialonglong2025@163.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Introduce a new capability and ioctl to expose CPU compatibility modes
supported by the host processor for nested guests.
On IBM POWER systems, newer processor generations (N) can operate in
compatibility modes corresponding to earlier generations, like (N-1) and
(N-2). This is particularly relevant for nested virtualization, where
nested KVM guests may need to run with a specific processor compatibility
level.
Introduce KVM_CAP_PPC_COMPAT_CAPS capability and the corresponding
KVM_PPC_GET_COMPAT_CAPS vm ioctl. The ioctl returns a bitmap describing
the compatibility modes supported by the host in respective bit numbers,
allowing userspace (e.g., QEMU) to select an appropriate compatibility
level when configuring nested KVM guests.
The ioctl handling is added in kvm_arch_vm_ioctl() and retrieves host
CPU compatibility capabilities via a PowerPC-specific backend
implementation when available.
The struct kvm_ppc_compat_caps places the 'size' field first so it can
be read alone via get_user() before copy_struct_from_user() is called,
avoiding pointer arithmetic to locate the size field.
The ioctl is defined using _IO so the ioctl number remains stable even if
the struct grows in future versions. It uses copy_struct_from_user() and
copy_struct_to_user() to provide forward- and backward-compatible
extensibility: older userspace passing a smaller struct to a newer kernel
gets zero-padded trailing fields. Newer userspace passing a larger struct to
an older kernel (usize > ksize) succeeds if trailing bytes are zero (the
kernel reports back min(usize, ksize) as the filled size); if trailing bytes
are non-zero, the kernel writes back ksize into host_caps.size and returns
-E2BIG so userspace can retry with the correct size.
KVM_PPC_COMPAT_CAPS_SIZE_VER0 is defined as a frozen integer constant
(24) marking the size of the initial struct version, used as the
minimum floor for size field validation, similar to other versioned
struct interfaces in the kernel.
The 'flags' field is reserved for future use. The kernel rejects any
call where flags is non-zero with -EINVAL, preventing garbage values
from being baked into ABI permanently.
The ioctl returns appropriate error codes: E2BIG if usize exceeds
PAGE_SIZE, or if new userspace provides a larger struct with non-zero
trailing bytes (with ksize written back into host_caps.size for the
retry); EINVAL for an invalid size or non-zero reserved fields; EFAULT
for failed copy operations; and ENOTTY if the backend doesn't implement
get_compat_caps.
Suggested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Reviewed-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260808161148.66673-2-amachhiw@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v7.3-rc1
This contains a new device tree for the Lenove ThinkEdge SE70 Edge
Client device as well as a number of fixes and cleanups for Tegra234 and
Tegra194. Tegra264 sees a number of additions to enable more features.
* tag 'tegra-for-7.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (1469 commits)
arm64: tegra: Correct Tegra234 p3740 interrupt flags
arm64: tegra: Correct Tegra234 p3737 interrupt flags
arm64: tegra: Correct Tegra194 p2972 interrupt flags
arm64: tegra: Drop CPU masks from GICv3 PPI interrupts
arm64: tegra: Add Lenovo ThinkEdge SE70 device tree
arm64: tegra: Add pinctrl nodes for Tegra264
arm64: tegra: Fix CMDQV interrupt type on Tegra264
arm64: tegra: Properly sort devices on Tegra264
arm64: tegra: Add GTE nodes for Tegra264
arm64: tegra: Add Host1x and VIC on Tegra264
arm64: tegra: Populate CPU and L2 cache nodes on Tegra264
arm64: tegra: Enable GPCDMA in Tegra264 and add iommu-map
Linux 7.2-rc5
super: fix emergency thaw deadlock on frozen block devices
tracing: perf: Fix stale head for perf syscall tracing
ftrace: Add global mutex to serialize trace_parser access
tracing: Delay module ref count for "enable_event" trigger
tracing: Fix use-after-free freeing trigger private data
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
tracing: Fix context switch counter truncation
...
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 7.2-rc7 that
resolve some reported issues. Included in here are:
- new quirk for some broken USB devices
- thunderbolt device fixes for reported issues
- usb gadget driver fix
- usb atm driver fix
- xhci driver fixes.
- other minor USB driver fixes
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: use BIT_ULL for CRCR bits to fix incorrect 64bit mask
usb: quirks: Add ShanWan gamepad to quirk list
usb: hub: Split announce_device() to log device identity before enumeration
usb: core: Add quirk for 255-bytes initial config read
usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm()
usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg
usb: gadget: f_ncm: Use unsigned int for ndp_index
usb: cdnsp: fix incorrect endian conversions for APB timeout register
thunderbolt: Initialize ->domain_released completion before it is being used
thunderbolt: icm: Preserve USB4 proxy data-valid bit
thunderbolt: Bound the DROM dual link port number before indexing sw->ports
thunderbolt: Fix bandwidth group reservation indexing
thunderbolt: stream: Unmap buffers with mapped size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and documentation fixes from Greg KH:
"Here are some small char/misc and nvmem and documentation fixes for
7.2-rc7 to resolve some reported issues. Included in here are:
- updates to the documentation for the kernel threat model and
security bugs to get the LLMs to actually follow what we have been
asking them to do (i.e. not claim security issues for things we do
not consider security issues.)
- nvmem driver fixes which required a tiny "layout" driver to be
added.
- fastrpc driver fixes
- mei driver fix
- counter driver fix
- binder driver fix
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
docs: security-bugs: clarify some mandatory steps for AI reports
docs: coding-assistant: explain important steps when looking for bugs
docs: security-bugs: clarify what counts as a valid version
docs: threat-model: move fake devices out of "non production use"
docs: threat-model: clarify "security bug" vs "vulnerability"
counter: microchip-tcb-capture: Fix DT channel validation
mei: pull kvfree out of spinlock
rust_binder: do not query current thread for all ioctls
nvmem: layouts: Add fixed-layout driver
nvmem: apple-spmi-nvmem: wrap regmap calls to satisfy CFI
misc: fastrpc: fix memory leak in fastrpc_channel_ctx_free
misc: fastrpc: fix channel ctx ref leak when session alloc fails
misc: fastrpc: take fl->lock when moving mmaps on interrupted invoke
misc: fastrpc: Remove buffer from list prior to unmap operation
misc: fastrpc: Fix initial memory allocation for Audio PD memory pool
|
|
In order to use preempt_count() to track the interrupt disable nesting
level, __preempt_count_{add,sub}_return() are introduced, as their names
suggest, these primitives return the new value of the preempt_count()
after changing it. The following example shows the usage of it in
local_interrupt_disable():
// increase the HARDIRQ_DISABLE bit
new_count = __preempt_count_add_return(HARDIRQ_DISABLE_OFFSET);
// if it's the first-time increment, then disable the interrupt
// at hardware level.
if ((new_count & HARDIRQ_DISABLE_MASK) == HARDIRQ_DISABLE_OFFSET) {
local_irq_save(flags);
raw_cpu_write(local_interrupt_disable_state, flags);
}
Having these primitives will avoid a read of preempt_count() after
changing preempt_count() on certain architectures.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://patch.msgid.link/20260804161447.84806-4-boqun@kernel.org
|
|
In order to support preempt_disable()-like interrupt disabling, that is,
using part of preempt_count() to track interrupt disabling nesting
level, change the preempt_count() layout to contain 8-bit
HARDIRQ_DISABLE count.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260121223933.1568682-2-lyude@redhat.com
Link: https://patch.msgid.link/20260804161447.84806-3-boqun@kernel.org
|
|
Move NMI nesting tracking from the preempt_count bits to a separate
per-CPU counter (nmi_nesting). This is to free up the NMI bits in the
preempt_count, allowing those bits to be repurposed for other uses.
Reduce NMI_BITS from 4 to 1, using it only to detect if we're in an NMI.
The per-CPU counter currently caps nesting at 15.
[boqun: Address Steven Rostedt's comment on the BUG_ON() condition]
[boqun: Use preempt_count_set() in __nmi_exit() to avoid underflow]
Suggested-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260121223933.1568682-3-lyude@redhat.com
Link: https://patch.msgid.link/20260804161447.84806-2-boqun@kernel.org
|
|
We currently have two implementations of get_timer offset(), one
in arm_arch_timer.h, and another one in switch.h.
These two only differ by a pair of kern_hyp_va(), which seems a
pretty weak reason to open-code it.
Turn this function into a macro to avoid the include dependency hell
on kern_hyp_va(), and make it work correctly in all contexts.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://patch.msgid.link/20260808085824.732659-2-smostafa@google.com
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v7.3
Introduce DeviceTree support for the Shikra SoC, its GCC and RPM clock
controllers, CQM, CQS, and IQS SoM platforms, and their evaluation boards.
Document the Hawi and Maili SoCs.
Add the Eliza CQS SoM and EVK platforms, the QCS8550 RB5 Gen 2, Vicharak
Axon Mini, HONOR MagicBook Art 14, Microsoft Surface Pro 12, Xiaomi 12 Lite,
Motorola Edge 30, Sony Xperia M2, and Motorola Moto G2 device trees.
Extend Eliza support with USB, SD card, touchscreen, PMIC, interconnect,
thermal, CPU and LLCC bandwidth-monitor, QUPv3, and ADSP GPR descriptions.
Expand Glymur support with GPU, camera and EVA clock controllers, LPASS
audio, CoreSight, PCIe, USB, IMEM and PIL memory regions, power domains,
thermal cooling, and CRD peripherals. Add SoCCP, PMIC regulator, TRNG, and
CPU-capacity descriptions.
Add display, IPA, camera, USB, audio, crypto, TRNG, CoreSight, and thermal
support to the Kaanapali, Milos, Hamoa, and related platforms. Add embedded
controller support for Hamoa and Glymur boards.
Improve networking-platform descriptions with IPQ PCIe port, PHY, clock,
PWM, regulator, and interrupt updates. Update CTCU, display, Iris, audio,
camera, PCIe, USB-C, power-domain, memory-region, and thermal descriptions
across established Qualcomm platforms.
Correct bindings and DeviceTree validation for Qualcomm compatible strings,
legacy fallback compatibles, node naming and formatting, address ranges,
clock specifiers, reserved memory, regulators, GPIOs, and peripheral wiring.
* tag 'qcom-arm64-for-7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (244 commits)
arm64: dts: qcom: eliza: Describe the ADSP GPR node
arm64: dts: qcom: eliza-evk: Add support for USB and SD card
dt-bindings: arm: qcom-soc: Allow WSA88xx speaker compatible
dt-bindings: arm: qcom-soc: Validate nodes with fallbacks
dt-bindings: arm: qcom-soc: Document more of existing legacy style compatibles
dt-bindings: arm: qcom-soc: Include Eliza, Kaanapali and others in SoC names
arm64: dts: qcom: eliza: Enable cpufreq cooling devices
arm64: dts: qcom: glymur: add SoCCP DT node
arm64: dts: qcom: glymur: fix SoCCP memory mappings
arm64: dts: qcom: mahua: Add QREF regulator supplies to TCSR
arm64: dts: qcom: glymur: Add QREF regulator supplies to TCSR
arm64: dts: qcom: glymur: Add CX power domain to GCC
arm64: dts: qcom: glymur: Drop fake PCIe phy 3B
arm64: dts: qcom: glymur: add TRNG node
arm64: dts: qcom: glymur: enable ETR and CTCU devices
arm64: dts: qcom: glymur: Add PCIe port compatibles and ports
arm64: dts: qcom: smb2370: Disable SMB2370_2 by default
arm64: dts: qcom: eliza-mtp: Enable touchscreen
arm64: dts: qcom: purwa-iot-som: enable video
arm64: dts: qcom: purwa: Override Iris clocks and operating points
...
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix Rust build failure on s390 by gating ioremap() / iounmap()
helpers and the io::mem module on CONFIG_HAS_IOMEM; gate affected
doctests as well.
- Add missing kernel-doc for show_const / store_const union members in
struct device_attribute.
* tag 'driver-core-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
rust: io: gate ioremap doctests on CONFIG_HAS_IOMEM
rust: io: gate ioremap/iounmap on CONFIG_HAS_IOMEM
driver core: add missing kernel-doc for union members
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Fixes for information leaks and OOB accesses across several drivers,
including evdev, focaltech, edt-ft5x06, iforce, and cs40l50-vibra
- Improvements to the synaptics-rmi4 driver to properly handle F54
worker errors and prevent buffer overflows
- Input validation fixes in the hynitron_cstxxx touchscreen driver to
prevent issues with invalid finger IDs and touch counts
- Fixes for use-after-free and initialization bugs in the byd mouse and
psxpad-spi drivers
- New quirks for the atkbd driver to make keyboard work on HONOR and
Xiaomi laptops
- Support for the ZENAIM LEVERLESS controller in the xpad driver.
* tag 'input-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: evdev - sanitize event type index when fetching event masks
Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue
Input: synaptics-rmi4 - block s_input when F54 queue is busy
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
Input: synaptics-rmi4 - zero report size on F54 work error
Input: synaptics-rmi4 - fix F55 transmitter electrode count typo
Input: hynitron_cstxxx - validate touch count and finger IDs
Input: evdev - fix information leak in evdev_pass_values()
fixp-arith: convert comments to kernel-doc format
Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet
Input: atkbd - skip deactivate for HONOR ZQC-P
Input: atkbd - skip deactivate for Xiaomi Book Pro 14's internal keyboard
Input: iforce - validate input packet lengths
Input: psxpad-spi - set driver data before use
Input: cs40l50-vibra - validate custom data from user space
Input: xpad - add support for ZENAIM LEVERLESS
Input: edt-ft5x06 - ignore contacts with an out-of-range slot id
Input: byd - synchronize timer deletion before freeing private data
|
|
Implement ->set_speed() so the I3C core can switch open-drain timing for
the first broadcast address per spec: I3C_OPEN_DRAIN_SLOW_SPEED programs
tHIGH_INIT (200 ns) before RSTDAA, and I3C_OPEN_DRAIN_NORMAL_SPEED restores
normal OD timing afterward. Cache the normal OD register value during bus
init and use a separate od_hcnt for the slow path so SDR extended timing
remains derived from the normal PP hcnt.
For AMD_I3C_OD_PP_TIMING, cache AMD_I3C_OD_TIMING as the normal OD
baseline and stop rewriting OD timing in send_ccc_cmd()/runtime resume so
I3C_OPEN_DRAIN_SLOW_SPEED is preserved through RSTDAA.
Use PM_RUNTIME_ACQUIRE_AUTOSUSPEND() in set_speed(). Compute od_hcnt with
DIV_ROUND_UP_ULL() for 32-bit safety and clamp it to U8_MAX to match the
8-bit I3C_OD_HCNT field.
Fixes I2C devices with spike filters not being detected on mixed buses.
Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/d789219ca0418898a1ef2bf9295b4f96ca7b4209.1785484707.git.tze.yee.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add i3c_master_has_wakeup_enabled_devs(), which iterates over the devices
on an I3C bus and reports whether any of them are enabled for system
wakeup and have IBI enabled.
Controller drivers can use this helper to determine whether wakeup
support must remain available while the system is suspended.
Acked-by : Mukesh Savaliya <mukesh.savaliya@oss.qualcomm.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260807145638.168865-11-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
An I3C controller acts as a bus controller for one or more I3C devices.
If the controller can wake the system in response to an In-Band
Interrupt (IBI), then any device on that bus that is capable of
generating IBIs can potentially be used as a wakeup source.
Add an ibi_wakeup flag to struct i3c_master_controller so controller
drivers can advertise support for IBI-based wakeup.
If set, mark IBI-capable I3C devices as wakeup capable when they are
registered, allowing wakeup management through the standard device
wakeup framework.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Mukesh Savaliya <mukesh.savaliya@oss.qualcomm.com>
Link: https://patch.msgid.link/20260807145638.168865-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
