| Age | Commit message (Collapse) | Author |
|---|
|
hci_cmd_sync_run() may run the work immediately if called from existing
sync work (otherwise it queues a new sync work). In this case it fails
to call the destroy() function.
On immediate run, make it behave same way as if item was queued
successfully: call destroy, and return 0.
The only callsite is hci_abort_conn() via hci_cmd_sync_run_once(), and
this changes its return value. However, its return value is not used
except as the return value for hci_disconnect(), and nothing uses the
return value of hci_disconnect(). Hence there should be no behavior
change anywhere.
Fixes: c898f6d7b093b ("Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard.
Fixes: 96298f640104 ("Bluetooth: L2CAP: handle l2cap config request during open state")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer
and id_addr_timer while holding conn->lock. However, the work functions
l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire
conn->lock, creating a potential AB-BA deadlock if the work is already
executing when l2cap_conn_del() takes the lock.
Move the work cancellations before acquiring conn->lock and use
disable_delayed_work_sync() to additionally prevent the works from
being rearmed after cancellation, consistent with the pattern used in
hci_conn_del().
Fixes: ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When the L2CAP channel mode is L2CAP_MODE_ERTM/L2CAP_MODE_STREAMING,
l2cap_publish_rx_avail will be called and le flow credits will be sent in
l2cap_chan_rx_avail, even though the link type is ACL.
The logs in question as follows:
> ACL Data RX: Handle 129 flags 0x02 dlen 12
L2CAP: Unknown (0x16) ident 4 len 4
40 00 ed 05
< ACL Data TX: Handle 129 flags 0x00 dlen 10
L2CAP: Command Reject (0x01) ident 4 len 2
Reason: Command not understood (0x0000)
Bluetooth: Unknown BR/EDR signaling command 0x16
Bluetooth: Wrong link type (-22)
Fixes: ce60b9231b66 ("Bluetooth: compute LE flow credits based on recvbuf space")
Signed-off-by: Zhang Chen <zhangchen01@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This attempt to fix regressions caused by reusing ident which apparently
is not handled well on certain stacks causing the stack to not respond to
requests, so instead of simple returning the first unallocated id this
stores the last used tx_ident and then attempt to use the next until all
available ids are exausted and then cycle starting over to 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177
Fixes: 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
|
|
Before using sk pointer, check if it is null.
Fix the following:
KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267]
CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025
Workqueue: events l2cap_info_timeout
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce
veth0_macvtap: entered promiscuous mode
RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001
RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000
R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005582615a5008 CR3: 000000007007e000 CR4: 0000000000752ef0
PKRU: 55555554
Call Trace:
<TASK>
__kasan_check_byte+0x12/0x40
lock_acquire+0x79/0x2e0
lock_sock_nested+0x48/0x100
? l2cap_sock_ready_cb+0x46/0x160
l2cap_sock_ready_cb+0x46/0x160
l2cap_conn_start+0x779/0xff0
? __pfx_l2cap_conn_start+0x10/0x10
? l2cap_info_timeout+0x60/0xa0
? __pfx___mutex_lock+0x10/0x10
l2cap_info_timeout+0x68/0xa0
? process_scheduled_works+0xa8d/0x18c0
process_scheduled_works+0xb6e/0x18c0
? __pfx_process_scheduled_works+0x10/0x10
? assign_work+0x3d5/0x5e0
worker_thread+0xa53/0xfc0
kthread+0x388/0x470
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x51e/0xb90
? __pfx_ret_from_fork+0x10/0x10
veth1_macvtap: entered promiscuous mode
? __switch_to+0xc7d/0x1450
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
batman_adv: batadv0: Interface activated: batadv_slave_0
batman_adv: batadv0: Interface activated: batadv_slave_1
netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce
ieee80211 phy39: Selected rate control algorithm 'minstrel_ht'
RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001
RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000
R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7e16139e9c CR3: 000000000e74e000 CR4: 0000000000752ef0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception
Fixes: 54a59aa2b562 ("Bluetooth: Add l2cap_chan->ops->ready()")
Signed-off-by: Helen Koike <koike@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering).
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory.
Link: https://lore.kernel.org/linux-bluetooth/20260315132013.75ab40c5@kernel.org/T/#m1418f9c82eeff8510c1beaa21cf53af20db96c06
Fixes: 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
|
|
sco_recv_frame() reads conn->sk under sco_conn_lock() but immediately
releases the lock without holding a reference to the socket. A concurrent
close() can free the socket between the lock release and the subsequent
sk->sk_state access, resulting in a use-after-free.
Other functions in the same file (sco_sock_timeout(), sco_conn_del())
correctly use sco_sock_hold() to safely hold a reference under the lock.
Fix by using sco_sock_hold() to take a reference before releasing the
lock, and adding sock_put() on all exit paths.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path.
Fixes: aac23bf63659 ("Bluetooth: Implement LE L2CAP reassembly")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Syzbot reported a KASAN stack-out-of-bounds read in l2cap_build_cmd()
that is triggered by a malformed Enhanced Credit Based Connection Request.
The vulnerability stems from l2cap_ecred_conn_req(). The function allocates
a local stack buffer (`pdu`) designed to hold a maximum of 5 Source Channel
IDs (SCIDs), totaling 18 bytes. When an attacker sends a request with more
than 5 SCIDs, the function calculates `rsp_len` based on this unvalidated
`cmd_len` before checking if the number of SCIDs exceeds
L2CAP_ECRED_MAX_CID.
If the SCID count is too high, the function correctly jumps to the
`response` label to reject the packet, but `rsp_len` retains the
attacker's oversized value. Consequently, l2cap_send_cmd() is instructed
to read past the end of the 18-byte `pdu` buffer, triggering a
KASAN panic.
Fix this by moving the assignment of `rsp_len` to after the `num_scid`
boundary check. If the packet is rejected, `rsp_len` will safely
remain 0, and the error response will only read the 8-byte base header
from the stack.
Fixes: c28d2bff7044 ("Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short")
Reported-by: syzbot+b7f3e7d9a596bf6a63e3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b7f3e7d9a596bf6a63e3
Tested-by: syzbot+b7f3e7d9a596bf6a63e3@syzkaller.appspotmail.com
Signed-off-by: Minseo Park <jacob.park.9436@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_information_rsp() checks that cmd_len covers the fixed
l2cap_info_rsp header (type + result, 4 bytes) but then reads
rsp->data without verifying that the payload is present:
- L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads
4 bytes past the header (needs cmd_len >= 8).
- L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header
(needs cmd_len >= 5).
A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an
out-of-bounds read of adjacent skb data.
Guard each data access with the required payload length check. If the
payload is too short, skip the read and let the state machine complete
with safe defaults (feat_mask and remote_fixed_chan remain zero from
kzalloc), so the info timer cleanup and l2cap_conn_start() still run
and the connection is not stalled.
Fixes: 4e8402a3f884 ("[Bluetooth] Retrieve L2CAP features mask on connection setup")
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Johannes Möller <research@johannes-moeller.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field.
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Johannes Möller <research@johannes-moeller.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Within each signaling channel a different Identifier shall be used
for each successive request or indication.'
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d
So this attempts to check if there are any channels pending with the
same identifier and rejects if any are found.
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
After commit ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in
hci_chan_del"), l2cap_conn_del() uses conn->lock to protect access to
conn->users. However, l2cap_register_user() and l2cap_unregister_user()
don't use conn->lock, creating a race condition where these functions can
access conn->users and conn->hchan concurrently with l2cap_conn_del().
This can lead to use-after-free and list corruption bugs, as reported
by syzbot.
Fix this by changing l2cap_register_user() and l2cap_unregister_user()
to use conn->lock instead of hci_dev_lock(), ensuring consistent locking
for the l2cap_conn structure.
Reported-by: syzbot+14b6d57fb728e27ce23c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=14b6d57fb728e27ce23c
Fixes: ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del")
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the following trace caused by not dropping l2cap_conn
reference when user->remove callback is called:
[ 97.809249] l2cap_conn_free: freeing conn ffff88810a171c00
[ 97.809907] CPU: 1 UID: 0 PID: 1419 Comm: repro_standalon Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy)
[ 97.809935] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 97.809947] Call Trace:
[ 97.809954] <TASK>
[ 97.809961] dump_stack_lvl (lib/dump_stack.c:122)
[ 97.809990] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808)
[ 97.810017] l2cap_conn_del (./include/linux/kref.h:66 net/bluetooth/l2cap_core.c:1821 net/bluetooth/l2cap_core.c:1798)
[ 97.810055] l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7347 (discriminator 1) net/bluetooth/l2cap_core.c:7340 (discriminator 1))
[ 97.810086] ? __pfx_l2cap_disconn_cfm (net/bluetooth/l2cap_core.c:7341)
[ 97.810117] hci_conn_hash_flush (./include/net/bluetooth/hci_core.h:2152 (discriminator 2) net/bluetooth/hci_conn.c:2644 (discriminator 2))
[ 97.810148] hci_dev_close_sync (net/bluetooth/hci_sync.c:5360)
[ 97.810180] ? __pfx_hci_dev_close_sync (net/bluetooth/hci_sync.c:5285)
[ 97.810212] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810242] ? up_write (./arch/x86/include/asm/atomic64_64.h:87 (discriminator 5) ./include/linux/atomic/atomic-arch-fallback.h:2852 (discriminator 5) ./include/linux/atomic/atomic-long.h:268 (discriminator 5) ./include/linux/atomic/atomic-instrumented.h:3391 (discriminator 5) kernel/locking/rwsem.c:1385 (discriminator 5) kernel/locking/rwsem.c:1643 (discriminator 5))
[ 97.810267] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810290] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752)
[ 97.810320] hci_unregister_dev (net/bluetooth/hci_core.c:504 net/bluetooth/hci_core.c:2716)
[ 97.810346] vhci_release (drivers/bluetooth/hci_vhci.c:691)
[ 97.810375] ? __pfx_vhci_release (drivers/bluetooth/hci_vhci.c:678)
[ 97.810404] __fput (fs/file_table.c:470)
[ 97.810430] task_work_run (kernel/task_work.c:235)
[ 97.810451] ? __pfx_task_work_run (kernel/task_work.c:201)
[ 97.810472] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810495] ? do_raw_spin_unlock (./include/asm-generic/qspinlock.h:128 (discriminator 5) kernel/locking/spinlock_debug.c:142 (discriminator 5))
[ 97.810527] do_exit (kernel/exit.c:972)
[ 97.810547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810574] ? __pfx_do_exit (kernel/exit.c:897)
[ 97.810594] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6))
[ 97.810616] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810639] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4))
[ 97.810664] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810688] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 97.810721] do_group_exit (kernel/exit.c:1093)
[ 97.810745] get_signal (kernel/signal.c:3007 (discriminator 1))
[ 97.810772] ? security_file_permission (./arch/x86/include/asm/jump_label.h:37 security/security.c:2366)
[ 97.810803] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810826] ? vfs_read (fs/read_write.c:555)
[ 97.810854] ? __pfx_get_signal (kernel/signal.c:2800)
[ 97.810880] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810905] ? __pfx_vfs_read (fs/read_write.c:555)
[ 97.810932] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.810960] arch_do_signal_or_restart (arch/x86/kernel/signal.c:337 (discriminator 1))
[ 97.810990] ? __pfx_arch_do_signal_or_restart (arch/x86/kernel/signal.c:334)
[ 97.811021] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.811055] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.811078] ? ksys_read (fs/read_write.c:707)
[ 97.811106] ? __pfx_ksys_read (fs/read_write.c:707)
[ 97.811137] exit_to_user_mode_loop (kernel/entry/common.c:66 kernel/entry/common.c:98)
[ 97.811169] ? rcu_is_watching (./arch/x86/include/asm/atomic.h:23 ./include/linux/atomic/atomic-arch-fallback.h:457 ./include/linux/context_tracking.h:128 kernel/rcu/tree.c:752)
[ 97.811192] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.811215] ? trace_hardirqs_off (./include/trace/events/preemptirq.h:36 (discriminator 33) kernel/trace/trace_preemptirq.c:95 (discriminator 33) kernel/trace/trace_preemptirq.c:90 (discriminator 33))
[ 97.811240] do_syscall_64 (./include/linux/irq-entry-common.h:226 ./include/linux/irq-entry-common.h:256 ./include/linux/entry-common.h:325 arch/x86/entry/syscall_64.c:100)
[ 97.811268] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 97.811292] ? exc_page_fault (arch/x86/mm/fault.c:1480 (discriminator 3) arch/x86/mm/fault.c:1527 (discriminator 3))
[ 97.811318] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
[ 97.811338] RIP: 0033:0x445cfe
[ 97.811352] Code: Unable to access opcode bytes at 0x445cd4.
Code starting with the faulting instruction
===========================================
[ 97.811360] RSP: 002b:00007f65c41c6dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 97.811378] RAX: fffffffffffffe00 RBX: 00007f65c41c76c0 RCX: 0000000000445cfe
[ 97.811391] RDX: 0000000000000400 RSI: 00007f65c41c6e40 RDI: 0000000000000004
[ 97.811403] RBP: 00007f65c41c7250 R08: 0000000000000000 R09: 0000000000000000
[ 97.811415] R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffffe8
[ 97.811428] R13: 0000000000000000 R14: 00007fff780a8c00 R15: 00007f65c41c76c0
[ 97.811453] </TASK>
[ 98.402453] ==================================================================
[ 98.403560] BUG: KASAN: use-after-free in __mutex_lock (kernel/locking/mutex.c:199 kernel/locking/mutex.c:694 kernel/locking/mutex.c:776)
[ 98.404541] Read of size 8 at addr ffff888113ee40a8 by task khidpd_00050004/1430
[ 98.405361]
[ 98.405563] CPU: 1 UID: 0 PID: 1430 Comm: khidpd_00050004 Not tainted 7.0.0-rc1-dirty #14 PREEMPT(lazy)
[ 98.405588] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 98.405600] Call Trace:
[ 98.405607] <TASK>
[ 98.405614] dump_stack_lvl (lib/dump_stack.c:122)
[ 98.405641] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 98.405667] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.405691] ? __virt_addr_valid (arch/x86/mm/physaddr.c:55)
[ 98.405724] ? __mutex_lock (kernel/locking/mutex.c:199 kernel/locking/mutex.c:694 kernel/locking/mutex.c:776)
[ 98.405748] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597)
[ 98.405778] ? __mutex_lock (kernel/locking/mutex.c:199 kernel/locking/mutex.c:694 kernel/locking/mutex.c:776)
[ 98.405807] __mutex_lock (kernel/locking/mutex.c:199 kernel/locking/mutex.c:694 kernel/locking/mutex.c:776)
[ 98.405832] ? do_raw_spin_lock (kernel/locking/spinlock_debug.c:95 (discriminator 4) kernel/locking/spinlock_debug.c:118 (discriminator 4))
[ 98.405859] ? l2cap_unregister_user (./include/linux/list.h:381 (discriminator 2) net/bluetooth/l2cap_core.c:1723 (discriminator 2))
[ 98.405888] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114)
[ 98.405915] ? __pfx___mutex_lock (kernel/locking/mutex.c:775)
[ 98.405939] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.405963] ? lock_acquire (kernel/locking/lockdep.c:470 (discriminator 6) kernel/locking/lockdep.c:5870 (discriminator 6) kernel/locking/lockdep.c:5825 (discriminator 6))
[ 98.405984] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 98.406015] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406038] ? lock_release (kernel/locking/lockdep.c:5536 kernel/locking/lockdep.c:5889 kernel/locking/lockdep.c:5875)
[ 98.406061] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406085] ? _raw_spin_unlock_irqrestore (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:119 ./arch/x86/include/asm/irqflags.h:159 ./include/linux/spinlock_api_smp.h:178 kernel/locking/spinlock.c:194)
[ 98.406107] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406130] ? __timer_delete_sync (kernel/time/timer.c:1592)
[ 98.406158] ? l2cap_unregister_user (./include/linux/list.h:381 (discriminator 2) net/bluetooth/l2cap_core.c:1723 (discriminator 2))
[ 98.406186] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406210] l2cap_unregister_user (./include/linux/list.h:381 (discriminator 2) net/bluetooth/l2cap_core.c:1723 (discriminator 2))
[ 98.406263] hidp_session_thread (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 ./include/linux/kref.h:64 net/bluetooth/hidp/core.c:996 net/bluetooth/hidp/core.c:1305)
[ 98.406293] ? __pfx_hidp_session_thread (net/bluetooth/hidp/core.c:1264)
[ 98.406323] ? kthread (kernel/kthread.c:433)
[ 98.406340] ? __pfx_hidp_session_wake_function (net/bluetooth/hidp/core.c:1251)
[ 98.406370] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406393] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 98.406424] ? __pfx_hidp_session_wake_function (net/bluetooth/hidp/core.c:1251)
[ 98.406453] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406476] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:79 (discriminator 1))
[ 98.406499] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406523] ? kthread (kernel/kthread.c:433)
[ 98.406539] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406565] ? kthread (kernel/kthread.c:433)
[ 98.406581] ? __pfx_hidp_session_thread (net/bluetooth/hidp/core.c:1264)
[ 98.406610] kthread (kernel/kthread.c:467)
[ 98.406627] ? __pfx_kthread (kernel/kthread.c:412)
[ 98.406645] ret_from_fork (arch/x86/kernel/process.c:164)
[ 98.406674] ? __pfx_ret_from_fork (arch/x86/kernel/process.c:153)
[ 98.406704] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.406728] ? __pfx_kthread (kernel/kthread.c:412)
[ 98.406747] ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
[ 98.406774] </TASK>
[ 98.406780]
[ 98.433693] The buggy address belongs to the physical page:
[ 98.434405] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888113ee7c40 pfn:0x113ee4
[ 98.435557] flags: 0x200000000000000(node=0|zone=2)
[ 98.436198] raw: 0200000000000000 ffffea0004244308 ffff8881f6f3ebc0 0000000000000000
[ 98.437195] raw: ffff888113ee7c40 0000000000000000 00000000ffffffff 0000000000000000
[ 98.438115] page dumped because: kasan: bad access detected
[ 98.438951]
[ 98.439211] Memory state around the buggy address:
[ 98.439871] ffff888113ee3f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 98.440714] ffff888113ee4000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 98.441580] >ffff888113ee4080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 98.442458] ^
[ 98.443011] ffff888113ee4100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 98.443889] ffff888113ee4180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 98.444768] ==================================================================
[ 98.445719] Disabling lock debugging due to kernel taint
[ 98.448074] l2cap_conn_free: freeing conn ffff88810c22b400
[ 98.450012] CPU: 1 UID: 0 PID: 1430 Comm: khidpd_00050004 Tainted: G B 7.0.0-rc1-dirty #14 PREEMPT(lazy)
[ 98.450040] Tainted: [B]=BAD_PAGE
[ 98.450047] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 98.450059] Call Trace:
[ 98.450065] <TASK>
[ 98.450071] dump_stack_lvl (lib/dump_stack.c:122)
[ 98.450099] l2cap_conn_free (net/bluetooth/l2cap_core.c:1808)
[ 98.450125] l2cap_conn_put (net/bluetooth/l2cap_core.c:1822)
[ 98.450154] session_free (net/bluetooth/hidp/core.c:990)
[ 98.450181] hidp_session_thread (net/bluetooth/hidp/core.c:1307)
[ 98.450213] ? __pfx_hidp_session_thread (net/bluetooth/hidp/core.c:1264)
[ 98.450271] ? kthread (kernel/kthread.c:433)
[ 98.450293] ? __pfx_hidp_session_wake_function (net/bluetooth/hidp/core.c:1251)
[ 98.450339] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.450368] ? find_held_lock (kernel/locking/lockdep.c:5350 (discriminator 1))
[ 98.450406] ? __pfx_hidp_session_wake_function (net/bluetooth/hidp/core.c:1251)
[ 98.450442] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.450471] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:79 (discriminator 1))
[ 98.450499] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.450528] ? kthread (kernel/kthread.c:433)
[ 98.450547] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.450578] ? kthread (kernel/kthread.c:433)
[ 98.450598] ? __pfx_hidp_session_thread (net/bluetooth/hidp/core.c:1264)
[ 98.450637] kthread (kernel/kthread.c:467)
[ 98.450657] ? __pfx_kthread (kernel/kthread.c:412)
[ 98.450680] ret_from_fork (arch/x86/kernel/process.c:164)
[ 98.450715] ? __pfx_ret_from_fork (arch/x86/kernel/process.c:153)
[ 98.450752] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 98.450782] ? __pfx_kthread (kernel/kthread.c:412)
[ 98.450804] ret_from_fork_asm (arch/x86/entry/entry_64.S:258)
[ 98.450836] </TASK>
Fixes: b4f34d8d9d26 ("Bluetooth: hidp: add new session-management helpers")
Reported-by: soufiane el hachmi <kilwa10@gmail.com>
Tested-by: soufiane el hachmi <kilwa10@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced
mgmt_pending_valid(), which not only validates the pending command but
also unlinks it from the pending list if it is valid. This change in
semantics requires updates to several completion handlers to avoid list
corruption and memory safety issues.
This patch addresses two left-over issues from the aforementioned rework:
1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()
is replaced with mgmt_pending_free() in the success path. Since
mgmt_pending_valid() already unlinks the command at the beginning of
the function, calling mgmt_pending_remove() leads to a double list_del()
and subsequent list corruption/kernel panic.
2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error
path is removed. Since the current command is already unlinked by
mgmt_pending_valid(), this foreach loop would incorrectly target other
pending mesh commands, potentially freeing them while they are still being
processed concurrently (leading to UAFs). The redundant mgmt_cmd_status()
is also simplified to use cmd->opcode directly.
Fixes: 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Wang Tao <wangtao554@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
While introducing hci_le_create_conn_sync the functionality
of hci_connect_le was ported to hci_le_create_conn_sync including
the disable of the scan before starting the connection.
When this code was run non synchronously the immediate call that was
setting the flag HCI_LE_SCAN_INTERRUPTED had an impact. Since the
completion handler for the LE_SCAN_DISABLE was not immediately called.
In the completion handler of the LE_SCAN_DISABLE event, this flag is
checked to set the state of the hdev to DISCOVERY_STOPPED.
With the synchronised approach the later setting of the
HCI_LE_SCAN_INTERRUPTED flag has not the same effect. The completion
handler would immediately fire in the LE_SCAN_DISABLE call, check for
the flag, which is then not yet set and do nothing.
To fix this issue and make the function call work as before, we move the
setting of the flag HCI_LE_SCAN_INTERRUPTED before disabling the scan.
Fixes: 8e8b92ee60de ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
iso-tester defer tests seem to fail with hci_conn_hash_lookup_cig
being unable to resolve a cig in set_cig_params_sync due a race
where it is run immediatelly before hci_bind_cis is able to set
the QoS settings into the hci_conn object.
So this moves the assigning of the QoS settings to be done directly
by hci_le_set_cig_params to prevent that from happening again.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The last test step ("Test with Invalid public key X and Y, all set to
0") expects to get an "DHKEY check failed" instead of "unspecified".
Fixes: 6d19628f539f ("Bluetooth: SMP: Fail if remote and local public keys are identical")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Core 6.0, Vol 3, Part A, 3.4.3:
"... If the sum of the payload sizes for the K-frames exceeds the
specified SDU length, the receiver shall disconnect the channel."
This fixes L2CAP/LE/CFC/BV-27-C (running together with 'l2test -r -P
0x0027 -V le_public').
Fixes: aac23bf63659 ("Bluetooth: Implement LE L2CAP reassembly")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Core 6.0, Vol 3, Part A, 3.4.3:
"If the SDU length field value exceeds the receiver's MTU, the receiver
shall disconnect the channel..."
This fixes L2CAP/LE/CFC/BV-26-C (running together with 'l2test -r -P
0x0027 -V le_public -I 100').
Fixes: aac23bf63659 ("Bluetooth: Implement LE L2CAP reassembly")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
inode->i_ino is being converted to a u64. sock.sk_ino (which caches the
inode number) must also be widened to avoid truncation on 32-bit
architectures where unsigned long is only 32 bits.
Change sk_ino from unsigned long to u64, and update the return type
of sock_i_ino() to match. Fix all format strings that print the
result of sock_i_ino() (%lu -> %llu), and widen the intermediate
variables and function parameters in the diag modules that were
using int to hold the inode number.
Note that the UAPI socket diag structures (inet_diag_msg.idiag_inode,
unix_diag_msg.udiag_ino, etc.) are all __u32 and cannot be changed
without breaking the ABI. The assignments to those fields will
silently truncate, which is the existing behavior.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260304-iino-u64-v3-3-2257ad83d372@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
|
|
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE.
Link: https://lore.kernel.org/linux-bluetooth/5782243.rdbgypaU67@n9w6sw14/
Fixes: 27e2d4c8d28b ("Bluetooth: Add basic LE L2CAP connect request receiving support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
|
|
L2CAP_ECRED_CONN_REQ
Upon receiving L2CAP_ECRED_CONN_REQ the given MTU shall be checked
against the suggested MTU of the listening socket as that is required
by the likes of PTS L2CAP/ECFC/BV-27-C test which expects
L2CAP_CR_LE_UNACCEPT_PARAMS if the MTU is lowers than socket omtu.
In order to be able to set chan->omtu the code now allows setting
setsockopt(BT_SNDMTU), but it is only allowed when connection has not
been stablished since there is no procedure to reconfigure the output
MTU.
Link: https://github.com/bluez/bluez/issues/1895
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the condition for sending the LE Set Host Feature command.
The command is sent to indicate host support for Connected Isochronous
Streams in this case. It has been observed that the system could not
initialize BIS-only capable controllers because the controllers do not
support the command.
As per Core v6.2 | Vol 4, Part E, Table 3.1 the command shall be
supported if CIS Central or CIS Peripheral is supported; otherwise,
the command is optional.
Fixes: 709788b154ca ("Bluetooth: hci_core: Fix using {cis,bis}_capable for current settings")
Cc: stable@vger.kernel.org
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Similar to 03dba9cea72f ("Bluetooth: L2CAP: Fix not responding with
L2CAP_CR_LE_ENCRYPTION") the result code L2CAP_CR_LE_ENCRYPTION shall
be used when BT_SECURITY_MEDIUM is set since that means security mode 2
which mean it doesn't require authentication which results in
qualification test L2CAP/ECFC/BV-32-C failing.
Link: https://github.com/bluez/bluez/issues/1871
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue.
Fixes: 134f4b39df7b ("Bluetooth: add support for skb TX SND/COMPLETION timestamping")
Reported-by: syzbot+7ff4013eabad1407b70a@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=7ff4013eabad1407b70a
Cc: stable@vger.kernel.org
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Test L2CAP/ECFC/BV-26-C expect the response to L2CAP_ECRED_CONN_REQ with
and MTU value < L2CAP_ECRED_MIN_MTU (64) to be L2CAP_CR_LE_INVALID_PARAMS
rather than L2CAP_CR_LE_UNACCEPT_PARAMS.
Also fix not including the correct number of CIDs in the response since
the spec requires all CIDs being rejected to be included in the
response.
Link: https://github.com/bluez/bluez/issues/1868
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes responding with an invalid result caused by checking the
wrong size of CID which should have been (cmd_len - sizeof(*req)) and
on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which
is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C:
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 64
MPS: 64
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reserved (0x000c)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002)
when more than one channel gets its MPS reduced:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8
MTU: 264
MPS: 99
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 65
MPS: 64
! Source CID: 85
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 672
! MPS: 63
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Result: Reconfiguration failed - other unacceptable parameters (0x0004)
Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8
MTU: 84
! MPS: 71
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Link: https://github.com/bluez/bluez/issues/1865
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (53 commits)
lib/crypto: mldsa: Clarify the documentation for mldsa_verify() slightly
lib/crypto: aes: Drop 'volatile' from aes_sbox and aes_inv_sbox
lib/crypto: aes: Remove old AES en/decryption functions
lib/crypto: aesgcm: Use new AES library API
lib/crypto: aescfb: Use new AES library API
crypto: omap - Use new AES library API
crypto: inside-secure - Use new AES library API
crypto: drbg - Use new AES library API
crypto: crypto4xx - Use new AES library API
crypto: chelsio - Use new AES library API
crypto: ccp - Use new AES library API
crypto: x86/aes-gcm - Use new AES library API
crypto: arm64/ghash - Use new AES library API
crypto: arm/ghash - Use new AES library API
staging: rtl8723bs: core: Use new AES library API
net: phy: mscc: macsec: Use new AES library API
chelsio: Use new AES library API
Bluetooth: SMP: Use new AES library API
crypto: x86/aes - Remove the superseded AES-NI crypto_cipher
lib/crypto: x86/aes: Add AES-NI optimization
...
|
|
This attempts to proper track outstanding request by using struct ida
and allocating from it in l2cap_get_ident using ida_alloc_range which
would reuse ids as they are free, then upon completion release
the id using ida_free.
This fixes the qualification test case L2CAP/COS/CED/BI-29-C which
attempts to check if the host stack is able to work after 256 attempts
to connect which requires Ident field to use the full range of possible
values in order to pass the test.
Link: https://github.com/bluez/bluez/issues/1829
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
|
|
Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures
are not freed after being removed from the pending list.
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced
mgmt_pending_foreach() calls with individual command handling but missed
adding mgmt_pending_free() calls in both error and success paths of
set_ssp_complete(). Other completion functions like set_le_complete()
were fixed correctly in the same commit.
This causes a memory leak of the mgmt_pending_cmd structure and its
associated parameter data for each SSP command that completes.
Add the missing mgmt_pending_free(cmd) calls in both code paths to fix
the memory leak. Also fix the same issue in set_advertising_complete().
Fixes: 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Export hci_discovery_active() so it can be used by bluetooth
drivers built as modules.
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This renames the PHY fields in bt_iso_io_qos to PHYs (plural) since it
represents a bitfield where multiple PHYs can be set and make the same
change also to HCI_OP_LE_SET_CIG_PARAMS since both c_phy and p_phy
fields are bitfields.
This also fixes the assumption that hci_evt_le_cis_established PHYs
fields are compatible with bt_iso_io_qos, they are not, the fields in
hci_evt_le_cis_established represent just a single PHY value so they
need to be converted to bitfield when set in bt_iso_io_qos.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This enables client to use setsockopt(BT_PHY) to set the connection
packet type/PHY:
Example setting BT_PHY_BR_1M_1SLOT:
< HCI Command: Change Conne.. (0x01|0x000f) plen 4
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
3-DH5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) ncmd 1
Status: Success (0x00)
> HCI Event: Connection Packet Typ.. (0x1d) plen 5
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
Example setting BT_PHY_LE_1M_TX and BT_PHY_LE_1M_RX:
< HCI Command: LE Set PHY (0x08|0x0032) plen 7
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
All PHYs preference: 0x00
TX PHYs preference: 0x01
LE 1M
RX PHYs preference: 0x01
LE 1M
PHY options preference: Reserved (0x0000)
> HCI Event: Command Status (0x0f) plen 4
LE Set PHY (0x08|0x0032) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 6
LE PHY Update Complete (0x0c)
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
TX PHY: LE 1M (0x01)
RX PHY: LE 1M (0x01)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
1. Implement LE Event Mask to include events required for
LE Channel Sounding
2. Enable Channel Sounding feature bit in the
LE Host Supported Features command
3. Define HCI command and event structures necessary for
LE Channel Sounding functionality
Signed-off-by: Naga Bhavani Akella <naga.akella@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
While the configurable system parameters allow controlling the SNIFF
mode parameters, they do not include the idle_timeout parameter
responsible for enabling SNIFF mode.
Add the idle_timeout parameter to allow controlling the idle timeout
of BR/EDR connections.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The connection link policy is only set when establishing an outgoing
ACL connection causing connection idle modes not to be available on
incoming connections. Move the setting of the link policy to the
creation of the connection so all ACL connection will use the link
policy set on the HCI device.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_conn_enter_active_mode() uses queue_delayed_work() with the
intention that the work will run after the given timeout. However,
queue_delayed_work() does nothing if the work is already queued, so
depending on the link policy we may end up putting the connection
into idle mode every hdev->idle_timeout ms.
Use mod_delayed_work() instead so the work is queued if not already
queued, and the timeout is updated otherwise.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
conn->le_{tx,rx}_phy is not actually a bitfield as it set by
HCI_EV_LE_PHY_UPDATE_COMPLETE it is actually correspond to the current
PHY in use not what is supported by the controller, so this introduces
different fields (conn->le_{tx,rx}_def_phys) to track what PHYs are
supported by the connection.
Fixes: eab2404ba798 ("Bluetooth: Add BT_PHY socket option")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Fix memory leak in set_ssp_complete() where mgmt_pending_cmd structures
are not freed after being removed from the pending list.
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") replaced
mgmt_pending_foreach() calls with individual command handling but missed
adding mgmt_pending_free() calls in both error and success paths of
set_ssp_complete(). Other completion functions like set_le_complete()
were fixed correctly in the same commit.
This causes a memory leak of the mgmt_pending_cmd structure and its
associated parameter data for each SSP command that completes.
Add the missing mgmt_pending_free(cmd) calls in both code paths to fix
the memory leak. Also fix the same issue in set_advertising_complete().
Fixes: 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-20-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Enable the PA Sync Lost event mask to ensure PA sync loss is properly
reported and handled.
Fixes: 485e0626e587 ("Bluetooth: hci_event: Fix not handling PA Sync Lost event")
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
