| Age | Commit message (Collapse) | Author |
|---|
|
All five ROSE state machines (states 1-5) handle ROSE_CLEAR_REQUEST
by reading the cause and diagnostic bytes directly from skb->data[3]
and skb->data[4] without verifying that the frame is long enough:
rose_disconnect(sk, ..., skb->data[3], skb->data[4]);
The entry-point check in rose_route_frame() only enforces
ROSE_MIN_LEN (3 bytes), so a remote peer on a ROSE network can
send a syntactically valid but truncated CLEAR_REQUEST (3 or 4
bytes) while a connection is open in any state. Processing such a
frame causes a one- or two-byte out-of-bounds read past the skb
data, leaking uninitialized heap content as the cause/diagnostic
values returned to user space via getsockopt(ROSE_GETCAUSE).
Add a single length check at the rose_process_rx_frame() dispatch
point, before any state machine is entered, to drop frames that
carry the CLEAR_REQUEST type code but are too short to contain the
required cause and diagnostic fields.
Signed-off-by: Mashiro Chen <mashiro.chen@mailbox.org>
Link: https://patch.msgid.link/20260408172551.281486-1-mashiro.chen@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GRE is silently dropping packets without updating statistics.
In case of drop, increment rx_dropped counter to provide visibility into
packet loss. For the case where no GRE protocol handler is registered,
use rx_nohandler.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260409090945.1542440-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg,
the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the
destination register in the !fullsock / !locked_tcp_sock path.
Both macros borrow a temporary register to check is_fullsock /
is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the
ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with
a request_sock), dst_reg should be zeroed but is not, leaving the stale
ctx pointer:
- SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks
as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer,
leading to stack-out-of-bounds access in helpers like
bpf_skc_to_tcp6_sock().
- SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the
verifier believes is a SCALAR_VALUE, leaking a kernel pointer.
Fix both macros by:
- Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the
added instruction.
- Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register
restore in the !fullsock path, placed after the restore because
dst_reg == src_reg means we need src_reg intact to read ctx->temp.
Fixes: fd09af010788 ("bpf: sock_ops ctx access may stomp registers in corner case")
Fixes: 84f44df664e9 ("bpf: sock_ops sk access may stomp registers when dst_reg = src_reg")
Reported-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Closes: https://lore.kernel.org/bpf/6fe1243e-149b-4d3b-99c7-fcc9e2f75787@std.uestc.edu.cn/T/#u
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260407022720.162151-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The NFC-A anti-collision cascade in digital_in_recv_sdd_res() appends 3
or 4 bytes to target->nfcid1 on each round, but the number of cascade
rounds is controlled entirely by the peer device. The peer sets the
cascade tag in the SDD_RES (deciding 3 vs 4 bytes) and the
cascade-incomplete bit in the SEL_RES (deciding whether another round
follows).
ISO 14443-3 limits NFC-A to three cascade levels and target->nfcid1 is
sized accordingly (NFC_NFCID1_MAXSIZE = 10), but nothing in the driver
actually enforces this. This means a malicious peer can keep the
cascade running, writing past the heap-allocated nfc_target with each
round.
Fix this by rejecting the response when the accumulated UID would exceed
the buffer.
Commit e329e71013c9 ("NFC: nci: Bounds check struct nfc_target arrays")
fixed similar missing checks against the same field on the NCI path.
Cc: Simon Horman <horms@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Thierry Escande <thierry.escande@linux.intel.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Fixes: 2c66daecc409 ("NFC Digital: Add NFC-A technology support")
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026040913-figure-seducing-bd3f@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The netlink attribute length field nla_len is a __u16, which can only
represent values up to 65535 bytes. NICs with a large number of
statistics strings (e.g. mlx5_core with thousands of ETH_SS_STATS
entries) can produce a ETHTOOL_A_STRINGSET_STRINGS nest that exceeds
this limit.
When nla_nest_end() writes the actual nest size back to nla_len, the
value is silently truncated. This results in a corrupted netlink message
being sent to userspace: the parser reads a wrong (truncated) attribute
length and misaligns all subsequent attribute boundaries, causing decode
errors.
Fix this by using the new helper nla_nest_end_safe and error out if
the size exceeds U16_MAX.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260408-b4-ynl_ethtool-v2-5-7623a5e8f70b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket
state is LLCP_CLOSED, the code correctly calls release_sock() and
nfc_llcp_sock_put() but fails to return. Execution falls through to
the remainder of the function, which calls release_sock() and
nfc_llcp_sock_put() again. This results in a double release_sock()
and a refcount underflow via double nfc_llcp_sock_put(), leading to
a use-after-free.
Add the missing return statements after the LLCP_CLOSED branches
in both functions to prevent the fall-through.
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Signed-off-by: Junxi Qian <qjx1298677004@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260408081006.3723-1-qjx1298677004@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add struct tso_dma_map to tso.h for tracking DMA addresses of mapped
GSO payload data and tso_dma_map_completion_state.
The tso_dma_map combines DMA mapping storage with iterator state, allowing
drivers to walk pre-mapped DMA regions linearly. Includes fields for
the DMA IOVA path (iova_state, iova_offset, total_len) and a fallback
per-region path (linear_dma, frags[], frag_idx, offset).
The tso_dma_map_completion_state makes the IOVA completion state opaque
for drivers. Drivers are expected to allocate this and use the added
helpers to update the completion state.
Adds skb_frag_phys() to skbuff.h, returning the physical address
of a paged fragment's data, which is used by the tso_dma_map helpers
introduced in this commit described below.
The added TSO DMA map helpers are:
tso_dma_map_init(): DMA-maps the linear payload region and all frags
upfront. Prefers the DMA IOVA API for a single contiguous mapping with
one IOTLB sync; falls back to per-region dma_map_phys() otherwise.
Returns 0 on success, cleans up partial mappings on failure.
tso_dma_map_cleanup(): Handles both IOVA and fallback teardown paths.
tso_dma_map_count(): counts how many descriptors the next N bytes of
payload will need. Returns 1 if IOVA is used since the mapping is
contiguous.
tso_dma_map_next(): yields the next (dma_addr, chunk_len) pair.
On the IOVA path, each segment is a single contiguous chunk. On the
fallback path, indicates when a chunk starts a new DMA mapping so the
driver can set dma_unmap_len on that descriptor for completion-time
unmapping.
tso_dma_map_completion_save(): updates the completion state. Drivers
will call this at xmit time.
tso_dma_map_complete(): tears down the mapping at completion time and
returns true if the IOVA path was used. If it was not used, this is a
no-op and returns false.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-2-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
`virtio_transport_send_pkt_info` gets all the transport information
from the parameter `t_ops`. There is no need to call
`virtio_transport_get_ops()`.
Remove it.
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260408-remove_parameter-v2-1-e00f31cf7a17@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 0f42e3f4fe2a ("net: skb: fix cross-cache free of
KFENCE-allocated skb head"), skb_kfree_head() always calls kfree()
and no longer uses end_offset to distinguish between skb_small_head_cache
and generic kmalloc caches.
Clean up the leftovers:
- Remove the unused end_offset parameter from skb_kfree_head() and
update all callers.
- Remove the SKB_SMALL_HEAD_HEADROOM guard in __skb_unclone_keeptruesize()
which was protecting the old skb_kfree_head() logic.
- Update the SKB_SMALL_HEAD_CACHE_SIZE comment to reflect that the
non-power-of-2 sizing is no longer used for free-path disambiguation.
No functional change.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260410034736.297900-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1-3) IPVS updates from Julian Anastasov to enhance visibility into
IPVS internal state by exposing hash size, load factor etc and
allows userspace to tune the load factor used for resizing hash
tables.
4) reject empty/not nul terminated device names from xt_physdev.
This isn't a bug fix; existing code doesn't require a c-string.
But clean this up anyway because conceptually the interface name
definitely should be a c-string.
5) Switch nfnetlink to skb_mac_header helpers that didn't exist back
when this code was written. This gives us additional debug checks
but is not intended to change functionality.
6) Let the xt ttl/hoplimit match reject unknown operator modes.
This is a cleanup, the evaluation function simply returns false when
the mode is out of range. From Marino Dzalto.
7) xt_socket match should enable defrag after all other checks. This
bug is harmless, historically defrag could not be disabled either
except by rmmod.
8) remove UDP-Lite conntrack support, from Fernando Fernandez Mancera.
9) Avoid a couple -Wflex-array-member-not-at-end warnings in the old
xtables 32bit compat code, from Gustavo A. R. Silva.
10) nftables fwd expression should drop packets when their ttl/hl has
expired. This is a bug fix deferred, its not deemed important
enough for -rc8.
11) Add additional checks before assuming the mac header is an ethernet
header, from Zhengchuan Liang.
* tag 'nf-next-26-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: require Ethernet MAC header before using eth_hdr()
netfilter: nft_fwd_netdev: check ttl/hl before forwarding
netfilter: x_tables: Avoid a couple -Wflex-array-member-not-at-end warnings
netfilter: conntrack: remove UDP-Lite conntrack support
netfilter: xt_socket: enable defrag after all other checks
netfilter: xt_HL: add pr_fmt and checkentry validation
netfilter: nfnetlink: prefer skb_mac_header helpers
netfilter: x_physdev: reject empty or not-nul terminated device names
ipvs: add conn_lfactor and svc_lfactor sysctl vars
ipvs: add ip_vs_status info
ipvs: show the current conn_tab size to users
====================
Link: https://patch.msgid.link/20260410112352.23599-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When looking up a flow table in act_ct in tcf_ct_flow_table_get(),
rhashtable_lookup_fast() internally opens and closes an RCU read critical
section before returning ct_ft.
The tcf_ct_flow_table_cleanup_work() can complete before refcount_inc_not_zero()
is invoked on the returned ct_ft resulting in a UAF on the already freed ct_ft
object. This vulnerability can lead to privilege escalation.
Analysis from zdi-disclosures@trendmicro.com:
When initializing act_ct, tcf_ct_init() is called, which internally triggers
tcf_ct_flow_table_get().
static int tcf_ct_flow_table_get(struct net *net, struct tcf_ct_params *params)
{
struct zones_ht_key key = { .net = net, .zone = params->zone };
struct tcf_ct_flow_table *ct_ft;
int err = -ENOMEM;
mutex_lock(&zones_mutex);
ct_ft = rhashtable_lookup_fast(&zones_ht, &key, zones_params); // [1]
if (ct_ft && refcount_inc_not_zero(&ct_ft->ref)) // [2]
goto out_unlock;
...
}
static __always_inline void *rhashtable_lookup_fast(
struct rhashtable *ht, const void *key,
const struct rhashtable_params params)
{
void *obj;
rcu_read_lock();
obj = rhashtable_lookup(ht, key, params);
rcu_read_unlock();
return obj;
}
At [1], rhashtable_lookup_fast() looks up and returns the corresponding ct_ft
from zones_ht . The lookup is performed within an RCU read critical section
through rcu_read_lock() / rcu_read_unlock(), which prevents the object from
being freed. However, at the point of function return, rcu_read_unlock() has
already been called, and there is nothing preventing ct_ft from being freed
before reaching refcount_inc_not_zero(&ct_ft->ref) at [2]. This interval becomes
the race window, during which ct_ft can be freed.
Free Process:
tcf_ct_flow_table_put() is executed through the path tcf_ct_cleanup() call_rcu()
tcf_ct_params_free_rcu() tcf_ct_params_free() tcf_ct_flow_table_put().
static void tcf_ct_flow_table_put(struct tcf_ct_flow_table *ct_ft)
{
if (refcount_dec_and_test(&ct_ft->ref)) {
rhashtable_remove_fast(&zones_ht, &ct_ft->node, zones_params);
INIT_RCU_WORK(&ct_ft->rwork, tcf_ct_flow_table_cleanup_work); // [3]
queue_rcu_work(act_ct_wq, &ct_ft->rwork);
}
}
At [3], tcf_ct_flow_table_cleanup_work() is scheduled as RCU work
static void tcf_ct_flow_table_cleanup_work(struct work_struct *work)
{
struct tcf_ct_flow_table *ct_ft;
struct flow_block *block;
ct_ft = container_of(to_rcu_work(work), struct tcf_ct_flow_table,
rwork);
nf_flow_table_free(&ct_ft->nf_ft);
block = &ct_ft->nf_ft.flow_block;
down_write(&ct_ft->nf_ft.flow_block_lock);
WARN_ON(!list_empty(&block->cb_list));
up_write(&ct_ft->nf_ft.flow_block_lock);
kfree(ct_ft); // [4]
module_put(THIS_MODULE);
}
tcf_ct_flow_table_cleanup_work() frees ct_ft at [4]. When this function executes
between [1] and [2], UAF occurs.
This race condition has a very short race window, making it generally
difficult to trigger. Therefore, to trigger the vulnerability an msleep(100) was
inserted after[1]
Fixes: 138470a9b2cc2 ("net/sched: act_ct: fix lockdep splat in tcf_ct_flow_table_get")
Reported-by: zdi-disclosures@trendmicro.com
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260410111627.46611-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-04-09
Johan Hovold's patch fixes the a devres lifetime in the ucan driver.
The last patch is by Samuel Page and fixes a use-after-free in
raw_rcv() in the CAN_RAW protocol.
* tag 'linux-can-fixes-for-7.0-20260409' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: raw: fix ro->uniq use-after-free in raw_rcv()
can: ucan: fix devres lifetime
====================
Link: https://patch.msgid.link/20260409165942.588421-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Final updates, notably:
- crypto: move Michael MIC code into wireless (only)
- mac80211:
- multi-link 4-addr support
- NAN data support (but no drivers yet)
- ath10k: DT quirk to make it work on some devices
- ath12k: IPQ5424 support
- rtw89: USB improvements for performance
* tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (124 commits)
wifi: cfg80211: Explicitly include <linux/export.h> in michael-mic.c
wifi: ath10k: Add device-tree quirk to skip host cap QMI requests
dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
crypto: Remove michael_mic from crypto_shash API
wifi: ipw2x00: Use michael_mic() from cfg80211
wifi: ath12k: Use michael_mic() from cfg80211
wifi: ath11k: Use michael_mic() from cfg80211
wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211
wifi: ipw2x00: Rename michael_mic() to libipw_michael_mic()
wifi: libertas_tf: refactor endpoint lookup
wifi: libertas: refactor endpoint lookup
wifi: at76c50x: refactor endpoint lookup
wifi: ath12k: Enable IPQ5424 WiFi device support
wifi: ath12k: Add CE remap hardware parameters for IPQ5424
wifi: ath12k: add ath12k_hw_regs for IPQ5424
wifi: ath12k: add ath12k_hw_version_map entry for IPQ5424
wifi: ath12k: Add ath12k_hw_params for IPQ5424
dt-bindings: net: wireless: add ath12k wifi device IPQ5424
wifi: ath10k: fix station lookup failure during disconnect
wifi: ath12k: Create symlink for each radio in a wiphy
...
====================
Link: https://patch.msgid.link/20260410064703.735099-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Small improvement in SYN processing, to directly call
tcp_v6_init_seq_and_ts_off() or tcp_v4_init_seq_and_ts_off().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260410174950.745670-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename the leftover ifq_idx parameter naming to rxq_idx to be
consistent with the rest of the file and the header declaration.
Back then this was taken out of the queue leasing series given
the cleanup is independent. No functional change.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/netdev/20260131160237.07789674@kernel.org
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260410130602.552600-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev_put() releases a reference which didn't have a tracker.
References without a tracker are accounted in the tracking
code as "no_tracker". We can't free the tracker and then
call dev_put(). The references themselves will be fine
but the tracking code will think it's a double-release:
refcount_t: decrement hit 0; leaking memory.
IOW commit under fixes confused dev_put() (release never tracked
reference) with __dev_put() (just release the reference, skipping
the reference tracking infra).
Since __netdev_put_lock() uses dev_put() we can't feed a previously
tracked netdev ref into it. Let's flip things around.
netdev_put(dev, NULL) is the same as dev_put(dev) so make
netdev_put_lock() the real function and have __netdev_put_lock()
feed it a NULL tracker for all the cases that were untracked.
Fixes: d04686d9bc86 ("net: Implement netdev_nl_queue_create_doit")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260410153600.1984522-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Part of a stack canary removal from tcp_v{4,6}_rcv().
Return a drop_reason instead of a boolean, so that we no longer
have to pass the address of a local variable.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-37 (-37)
Function old new delta
tcp_v6_rcv 3133 3129 -4
tcp_v4_rcv 3206 3202 -4
tcp_add_backlog 1281 1252 -29
Total: Before=25567186, After=25567149, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409101147.1642967-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Network devices can have the same name within different network namespaces.
To help distinguish these devices, add the net_cookie value which can be
used to identify the netns.
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260408191056.1036330-1-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KEEP=1 is needed because we should respect the format of the packet as
the kernel sends it to us. Unless tx forward offloading is used, the
kernel is giving us the packet exactly as it should leave the specified
port on the wire. Until now this was not needed because the ports were
always functioning in a standalone mode in a VLAN-unaware way, so the
switch would not tag or untag frames anyway. But arguably it should have
been KEEP=1 all along.
Co-developed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260408-realtek_fixes-v1-2-915ff1404d56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document the updated tag layout fields (EFID, VSEL/VIDX) and clarify
which bits are set/cleared when emitting tags.
Co-developed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260408-realtek_fixes-v1-1-915ff1404d56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Like pointed out by Sashiko [1], since commit ed76f5edccc9 ("net: sched:
protect filter_chain list with filter_chain_lock mutex") TC filters are
added to a shared block and published to datapath before their ->change()
function is called. This is a problem for cls_fw: an invalid filter
created with the "old" method can still classify some packets before it
is destroyed by the validation logic added by Xiang.
Therefore, insisting with repeated runs of the following script:
# ip link add dev crash0 type dummy
# ip link set dev crash0 up
# mausezahn crash0 -c 100000 -P 10 \
> -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q &
# sleep 1
# tc qdisc add dev crash0 egress_block 1 clsact
# tc filter add block 1 protocol ip prio 1 matchall \
> action skbedit mark 65536 continue
# tc filter add block 1 protocol ip prio 2 fw
# ip link del dev crash0
can still make fw_classify() hit the WARN_ON() in [2]:
WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399
Modules linked in: cls_fw(E) act_skbedit(E)
CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full)
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014
RIP: 0010:fw_classify+0x244/0x250 [cls_fw]
Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202
RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004
RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40
RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0
R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000
R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000
FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0
Call Trace:
<TASK>
tcf_classify+0x17d/0x5c0
tc_run+0x9d/0x150
__dev_queue_xmit+0x2ab/0x14d0
ip_finish_output2+0x340/0x8f0
ip_output+0xa4/0x250
raw_sendmsg+0x147d/0x14b0
__sys_sendto+0x1cc/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x126/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fca40e822ba
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba
RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003
RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e
R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000
</TASK>
irq event stamp: 1045778
hardirqs last enabled at (1045784): [<ffffffff864ec042>] __up_console_sem+0x52/0x60
hardirqs last disabled at (1045789): [<ffffffff864ec027>] __up_console_sem+0x37/0x60
softirqs last enabled at (1045426): [<ffffffff874d48c7>] __alloc_skb+0x207/0x260
softirqs last disabled at (1045434): [<ffffffff874fe8f8>] __dev_queue_xmit+0x78/0x14d0
Then, because of the value in the packet's mark, dereference on 'q->handle'
with NULL 'q' occurs:
BUG: kernel NULL pointer dereference, address: 0000000000000038
[...]
RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw]
[...]
Skip "old-style" classification on shared blocks, so that the NULL
dereference is fixed and WARN_ON() is not hit anymore in the short
lifetime of invalid cls_fw "old-style" filters.
[1] https://sashiko.dev/#/patchset/20260331050217.504278-1-xmei5%40asu.edu
[2] https://elixir.bootlin.com/linux/v7.0-rc6/source/include/net/pkt_cls.h#L86
Fixes: faeea8bbf6e9 ("net/sched: cls_fw: fix NULL pointer dereference on shared blocks")
Fixes: ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/e39cbd3103a337f1e515d186fe697b4459d24757.1775661704.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the check that rejects sleepable BPF programs from doing
BPF_ANY/BPF_EXIST updates on local storage. This restriction was added
in commit b00fa38a9c1c ("bpf: Enable non-atomic allocations in local
storage") because kzalloc(GFP_KERNEL) could sleep inside
local_storage->lock. This is no longer a concern: all local storage
allocations now use kmalloc_nolock() which never sleeps.
In addition, since kmalloc_nolock() only accepts __GFP_ACCOUNT,
__GFP_ZERO and __GFP_NO_OBJ_EXT, the gfp_flags parameter plumbing from
bpf_*_storage_get() to bpf_local_storage_update() becomes dead code.
Remove gfp_flags from bpf_selem_alloc(), bpf_local_storage_alloc() and
bpf_local_storage_update(). Drop the hidden 5th argument from
bpf_*_storage_get helpers, and remove the verifier patching that
injected GFP_KERNEL/GFP_ATOMIC into the fifth argument.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260411015419.114016-4-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Switch to kmalloc_nolock() universally in local storage. Socket local
storage didn't move to kmalloc_nolock() when BPF memory allocator was
replaced by it for performance reasons. Now that kfree_rcu() supports
freeing memory allocated by kmalloc_nolock(), we can move the remaining
local storages to use kmalloc_nolock() and cleanup the cluttered free
paths.
Use kfree() instead of kfree_nolock() in bpf_selem_free_trace_rcu() and
bpf_local_storage_free_trace_rcu(). Both callbacks run in process context
where spinning is allowed, so kfree_nolock() is unnecessary.
Benchmark:
./bench -p 1 local-storage-create --storage-type socket \
--batch-size {16,32,64}
The benchmark is a microbenchmark stress-testing how fast local storage
can be created. There is no measurable throughput change for socket local
storage after switching from kzalloc() to kmalloc_nolock().
Socket local storage
batch creation speed diff
--------------- ---- ------------------ ----
Baseline 16 433.9 ± 0.6 k/s
32 434.3 ± 1.4 k/s
64 434.2 ± 0.7 k/s
After 16 439.0 ± 1.9 k/s +1.2%
32 437.3 ± 2.0 k/s +0.7%
64 435.8 ± 2.5k/s +0.4%
Also worth noting that the baseline got a 5% throughput boost when sheaf
replaces percpu partial slab recently [0].
[0] https://lore.kernel.org/bpf/20260123-sheaves-for-all-v4-0-041323d506f7@suse.cz/
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260411015419.114016-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The bridge-stp usermode helper is currently restricted to the initial
network namespace, preventing userspace STP daemons (e.g. mstpd) from
operating on bridges in other network namespaces. Since commit
ff62198553e4 ("bridge: Only call /sbin/bridge-stp for the initial
network namespace"), bridges in non-init namespaces silently fall
back to kernel STP with no way to use userspace STP.
Add a new bridge attribute IFLA_BR_STP_MODE that allows explicit
per-bridge control over STP mode selection:
BR_STP_MODE_AUTO (default) - Existing behavior: invoke the
/sbin/bridge-stp helper in init_net only; fall back to kernel STP
if it fails or in non-init namespaces.
BR_STP_MODE_USER - Directly enable userspace STP (BR_USER_STP)
without invoking the helper. Works in any network namespace.
Userspace is responsible for ensuring an STP daemon manages the
bridge.
BR_STP_MODE_KERNEL - Directly enable kernel STP (BR_KERNEL_STP)
without invoking the helper.
The mode can only be changed while STP is disabled, or set to the
same value (-EBUSY otherwise). IFLA_BR_STP_MODE is processed before
IFLA_BR_STP_STATE in br_changelink(), so both can be set atomically
in a single netlink message. The mode can also be changed in the
same message that disables STP.
The stp_mode struct field is u8 since all possible values fit, while
NLA_U32 is used for the netlink attribute since it occupies the same
space in the netlink message as NLA_U8.
A new stp_helper_active boolean tracks whether the /sbin/bridge-stp
helper was invoked during br_stp_start(), so that br_stp_stop() only
calls the helper for stop when it was called for start. This avoids
calling the helper asymmetrically when stp_mode changes between
start and stop.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Link: https://patch.msgid.link/20260405205224.3163000-2-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"The kernfs rbtree is keyed by (hash, ns, name) where the hash
is seeded with the raw namespace pointer via init_name_hash(ns).
The resulting hash values are exposed to userspace through
readdir seek positions, and the pointer-based ordering in
kernfs_name_compare() is observable through entry order.
Switch from raw pointers to ns_common::ns_id for both hashing
and comparison.
A preparatory commit first replaces all const void * namespace
parameters with const struct ns_common * throughout kernfs, sysfs,
and kobject so the code can access ns->ns_id. Also compare the
ns_id when hashes match in the rbtree to handle crafted collisions.
Also fix eventpoll RCU grace period issue and a cachefiles refcount
problem"
* tag 'vfs-7.0-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
kernfs: make directory seek namespace-aware
kernfs: use namespace id instead of pointer for hashing and comparison
kernfs: pass struct ns_common instead of const void * for namespace tags
eventpoll: defer struct eventpoll free to RCU grace period
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
|
|
Core 6.0, Vol 3, Part A, 3.4.3:
"... If the payload size of any K-frame exceeds the receiver's MPS, the
receiver shall disconnect the channel..."
This fixes L2CAP/LE/CFC/BV-27-C (running together with 'l2test -r -P
0x0027 -V le_public -I 100').
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
|
|
Some controller firmwares (eg for MT7925) continuously send invalid ISO
packet, which result to "ISO unknown handle" error spam in logs. It's
not important to show all of them to the user.
Rate limit these ISO error messages, similarly as we do for SCO.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
`ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and
`hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)`
after either assuming that the skb is associated with an Ethernet
device or checking only that the `ETH_HLEN` bytes at
`skb_mac_header(skb)` lie between `skb->head` and `skb->data`.
Make these paths first verify that the skb is associated with an
Ethernet device, that the MAC header was set, and that it spans at
least a full Ethernet header before accessing `eth_hdr(skb)`.
Suggested-by: Florian Westphal <fw@strlen.de>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Drop packets if their ttl/hl is too small for forwarding.
Fixes: d32de98ea70f ("netfilter: nft_fwd_netdev: allow to forward packets via neighbour layer")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the TRAILING_OVERLAP() helper to fix the following warnings:
1 net/netfilter/x_tables.c:816:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
1 net/netfilter/x_tables.c:811:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM)
and a set of members that would otherwise follow it. This overlays
the trailing members onto the FAM while preserving the original
memory layout.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
UDP-Lite (RFC 3828) socket support was recently retired from the core
networking stack. As a follow-up of that, drop the connection tracker
and NAT support for UDP-Lite in Netfilter.
This patch removes CONFIG_NF_CT_PROTO_UDPLITE and scrubs UDP-Lite
awareness from the conntrack core, NAT core, nft_ct, and ctnetlink.
Please note that stateless packet inspection, matching, ipsets or
logging support for IPPROTO_UDPLITE is preserved.
As conntrack no longer extracts UDP-Lite ports or tracks its L4 state,
when performing NAT the UDP-Lite checksum cannot be updated anymore.
That is an expected and acceptable consequence of removing UDP-Lite
conntrack module.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Originally this did not matter because defrag was enabled once per netns
and only disabled again on netns dismantle. When this got changed I should
have adjusted checkentry to not leave defrag enabled on error.
Fixes: de8c12110a13 ("netfilter: disable defrag once its no longer needed")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Add pr_fmt to prefix log messages with the module name for
easier debugging in dmesg.
Add checkentry functions for IPv4 (ttl_mt_check) and IPv6
(hl_mt6_check) to validate the match mode at rule registration
time, rejecting invalid modes with -EINVAL.
The evaluation function returns false in case the mode is
unknown, so this is a cleanup, not a bug fix.
Signed-off-by: Marino Dzalto <marino.dzalto@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This adds implicit DEBUG_WARN_ON_ONCE for debug configurations.
No other changes intended.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Reject names that lack a \0 character and reject the empty string as
well. iptables allows this but it fails to re-parse iptables-save output
that contain such rules.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Allow the default load factor for the connection and service tables
to be configured.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Add /proc/net/ip_vs_status to show current state of IPVS.
The motivation for this new /proc interface is to provide the output
for the users to help them decide when to tune the load factor for
hash tables, which is possible with the new sysctl knobs coming in
followup patch.
The output also includes information for the kthreads used for stats.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
As conn_tab is per-net, better to show the current hash table size
to users instead of the ip_vs_conn_tab_size (max).
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The variable ret is assigned a value at all places where it is used;
There is no need to assign a value when it is initially defined.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20260408032051.3096449-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Observed at boot time:
CPU: 43 UID: 0 PID: 3595 Comm: (t-daemon) Not tainted 6.12.0 #1
Call Trace:
<TASK>
dump_stack_lvl+0x4e/0x70
pcpu_alloc_noprof.cold+0x1f/0x4b
fib_nh_common_init+0x4c/0x110
fib6_nh_init+0x387/0x740
ip6_route_info_create+0x46d/0x640
addrconf_f6i_alloc+0x13b/0x180
addrconf_permanent_addr+0xd0/0x220
addrconf_notify+0x93/0x540
notifier_call_chain+0x5a/0xd0
__dev_notify_flags+0x5c/0xf0
dev_change_flags+0x54/0x70
do_setlink+0x36c/0xce0
rtnl_setlink+0x11f/0x1d0
rtnetlink_rcv_msg+0x142/0x3f0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x242/0x390
netlink_sendmsg+0x21b/0x470
__sys_sendto+0x1dc/0x1f0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x7d/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f5c3852f127
Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 85 ef 0c 00 00 41 89 ca 74 10 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 71 c3 55 48 83 ec 30 44 89 4c 24 2c 4c 89 44
RSP: 002b:00007ffe86caf4c8 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000556c5cd93210 RCX: 00007f5c3852f127
RDX: 0000000000000020 RSI: 0000556c5cd938b0 RDI: 0000000000000003
RBP: 00007ffe86caf5a0 R08: 00007ffe86caf4e0 R09: 0000000000000080
R10: 0000000000000000 R11: 0000000000000202 R12: 0000556c5cd932d0
R13: 00000000021d05d1 R14: 00000000021d05d1 R15: 0000000000000001
IFA_F_PERMANENT addresses require the allocation of a bunch of percpu
pointers, currently in atomic scope.
Similar to commit 51454ea42c1a ("ipv6: fix locking issues with loops
over idev->addr_list"), move fixup_permanent_addr() outside the
&idev->lock scope, and do the allocations with GFP_KERNEL. With such
change fixup_permanent_addr() is invoked with the BH enabled, and the
ifp lock acquired there needs the BH variant.
Note that we don't need to acquire a reference to the permanent
addresses before releasing the mentioned write lock, because
addrconf_permanent_addr() runs under RTNL and ifa removal always happens
under RTNL, too.
Also the PERMANENT flag is constant in the relevant scope, as it can be
cleared only by inet6_addr_modify() under the RTNL lock.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/46a7a030727e236af2dc7752994cd4f04f4a91d2.1775658924.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the typed random integer helpers instead of
get_random_bytes() when filling a single integer variable.
The helpers return the value directly, require no pointer
or size argument, and better express intent.
Skipped sites writing into __be16 (netdevsim) and __le64
(ceph) fields where a direct assignment would trigger
sparse endianness warnings.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260407150758.5889-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The netif_get_rx_queue_lease_locked() API hides the locking
and the descend onto the leased queue. Making the code
harder to follow (at least to me). Remove the API and open
code the descend a bit. Most of the code now looks like:
if (!leased)
return __helper(x);
hw_rxq = ..
netdev_lock(hw_rxq->dev);
ret = __helper(x);
netdev_unlock(hw_rxq->dev);
return ret;
Of course if we have more code paths that need the wrapping
we may need to revisit. For now, IMHO, having to know what
netif_get_rx_queue_lease_locked() does is not worth the 20LoC
it saves.
Link: https://patch.msgid.link/20260408151251.72bd2482@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
netkit: Support for io_uring zero-copy and AF_XDP
Containers use virtual netdevs to route traffic from a physical netdev
in the host namespace. They do not have access to the physical netdev
in the host and thus can't use memory providers or AF_XDP that require
reconfiguring/restarting queues in the physical netdev.
This patchset adds the concept of queue leasing to virtual netdevs that
allow containers to use memory providers and AF_XDP at native speed.
Leased queues are bound to a real queue in a physical netdev and act
as a proxy.
Memory providers and AF_XDP operations take an ifindex and queue id,
so containers would pass in an ifindex for a virtual netdev and a queue
id of a leased queue, which then gets proxied to the underlying real
queue.
We have implemented support for this concept in netkit and tested the
latter against Nvidia ConnectX-6 (mlx5) as well as Broadcom BCM957504
(bnxt_en) 100G NICs. For more details see the individual patches.
====================
Link: https://patch.msgid.link/20260402231031.447597-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a netdevice notifier in netkit to watch for NETDEV_UNREGISTER events.
If the target device is indeed NETREG_UNREGISTERING and previously leased
a queue to a netkit device, then collect the related netkit devices and
batch-unregister_netdevice_many() them.
If this were not done, then the netkit device would hold a reference on
the physical device preventing it from going away. However, in case of
both io_uring zero-copy as well as AF_XDP this situation is handled
gracefully and the allocated resources are torn down.
In the case where mentioned infra is used through netkit, the applications
have a reference on netkit, and netkit in turn holds a reference on the
physical device. In order to have netkit release the reference on the
physical device, we need such watcher to then unregister the netkit ones.
This is generally quite similar to the dependency handling in case of
tunnels (e.g. vxlan bound to a underlying netdev) where the tunnel device
gets removed along with the physical device.
# ip a
[...]
4: enp10s0f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether e8:eb:d3:a3:43:f6 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.2/24 scope global enp10s0f0np0
valid_lft forever preferred_lft forever
[...]
8: nk@NONE: <BROADCAST,MULTICAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
[...]
# rmmod mlx5_ib
# rmmod mlx5_core
[...]
[ 309.261822] mlx5_core 0000:0a:00.0 mlx5_0: Port: 1 Link DOWN
[ 344.235236] mlx5_core 0000:0a:00.1: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.246948] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.463754] mlx5_core 0000:0a:00.1: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
[ 344.770155] mlx5_core 0000:0a:00.1: E-Switch: cleanup
[...]
# ip a
[...]
[ both enp10s0f0np0 and nk gone ]
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-13-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similarly to the netif_mp_{open,close}_rxq handling for leased queues, proxy
the xsk_{reg,clear}_pool_at_qid via netif_get_rx_queue_lease_locked such
that in case a virtual netdev picked a leased rxq, the request gets through
to the real rxq in the physical netdev. The proxying is only relevant for
queue_id < dev->real_num_rx_queues since right now it's only supported for
rxqs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-10-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xsk_rcv_check tests for inbound packets to see whether they match
the bound AF_XDP socket. Refactor the test into a small helper
xsk_dev_queue_valid and move the validation against xs->dev and
xs->queue_id there.
The fast-path case stays in place and allows for quick return in
xsk_dev_queue_valid. If it fails, the validation is extended to
check whether the AF_XDP socket is bound against a leased queue,
and if so, the test is redone.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-9-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend netdev_queue_get_dma_dev to return the physical device of the
real rxq for DMA in case the queue was leased. This allows memory
providers like io_uring zero-copy or devmem to bind to the physically
leased rxq via virtual devices such as netkit.
Signed-off-by: David Wei <dw@davidwei.uk>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-8-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a process in a container wants to setup a memory provider, it will
use the virtual netdev and a leased rxq, and call netif_mp_{open,close}_rxq
to try and restart the queue. At this point, proxy the queue restart on
the real rxq in the physical netdev.
For memory providers (io_uring zero-copy rx and devmem), it causes the
real rxq in the physical netdev to be filled from a memory provider that
has DMA mapped memory from a process within a container.
Signed-off-by: David Wei <dw@davidwei.uk>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-7-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net_mp_open_rxq is currently not used in the tree as all callers are
using __net_mp_open_rxq directly, and net_mp_close_rxq is only used
once while all other locations use __net_mp_close_rxq.
Consolidate into a single API, netif_mp_{open,close}_rxq, using the
netif_ prefix to indicate that the caller is responsible for locking.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-6-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to AF_XDP, do not allow queues in a physical netdev to be resized
by ethtool -L when they are leased. Cover channel resize paths (both
netlink and ioctl) to reject resizing when the queues would be affected.
Given we need to have different checks for RX vs TX, detangle the code into
a two-loop version rather than the range of new_combined + min(new_rx, new_tx)
to old_combined + max(old_rx, old_tx).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-5-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
