| Age | Commit message (Collapse) | Author |
|---|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc5).
net/netfilter/nft_set_rbtree.c
598adea720b97 ("netfilter: revert nft_set_rbtree: validate open interval overlap")
3aea466a43998 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
https://lore.kernel.org/abgaQBpeGstdN4oq@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This attempt to fix regressions caused by reusing ident which apparently
is not handled well on certain stacks causing the stack to not respond to
requests, so instead of simple returning the first unallocated id this
stores the last used tx_ident and then attempt to use the next until all
available ids are exausted and then cycle starting over to 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177
Fixes: 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
|
|
Before using sk pointer, check if it is null.
Fix the following:
KASAN: null-ptr-deref in range [0x0000000000000260-0x0000000000000267]
CPU: 0 UID: 0 PID: 5985 Comm: kworker/0:5 Not tainted 7.0.0-rc4-00029-ga989fde763f4 #1 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-9.fc43 06/10/2025
Workqueue: events l2cap_info_timeout
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce
veth0_macvtap: entered promiscuous mode
RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001
RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000
R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005582615a5008 CR3: 000000007007e000 CR4: 0000000000752ef0
PKRU: 55555554
Call Trace:
<TASK>
__kasan_check_byte+0x12/0x40
lock_acquire+0x79/0x2e0
lock_sock_nested+0x48/0x100
? l2cap_sock_ready_cb+0x46/0x160
l2cap_sock_ready_cb+0x46/0x160
l2cap_conn_start+0x779/0xff0
? __pfx_l2cap_conn_start+0x10/0x10
? l2cap_info_timeout+0x60/0xa0
? __pfx___mutex_lock+0x10/0x10
l2cap_info_timeout+0x68/0xa0
? process_scheduled_works+0xa8d/0x18c0
process_scheduled_works+0xb6e/0x18c0
? __pfx_process_scheduled_works+0x10/0x10
? assign_work+0x3d5/0x5e0
worker_thread+0xa53/0xfc0
kthread+0x388/0x470
? __pfx_worker_thread+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x51e/0xb90
? __pfx_ret_from_fork+0x10/0x10
veth1_macvtap: entered promiscuous mode
? __switch_to+0xc7d/0x1450
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
batman_adv: batadv0: Interface activated: batadv_slave_0
batman_adv: batadv0: Interface activated: batadv_slave_1
netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
RIP: 0010:kasan_byte_accessible+0x12/0x30
Code: 79 ff ff ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 40 d6 48 c1 ef 03 48 b8 00 00 00 00 00 fc ff df <0f> b6 04 07 3c 08 0f 92 c0 c3 cc cce
ieee80211 phy39: Selected rate control algorithm 'minstrel_ht'
RSP: 0018:ffffc90006e0f808 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffffffff89746018 RCX: 0000000080000001
RDX: 0000000000000000 RSI: ffffffff89746018 RDI: 000000000000004c
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffffff8aae3e70 R12: 0000000000000000
R13: 0000000000000260 R14: 0000000000000260 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880983c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7e16139e9c CR3: 000000000e74e000 CR4: 0000000000752ef0
PKRU: 55555554
Kernel panic - not syncing: Fatal exception
Fixes: 54a59aa2b562 ("Bluetooth: Add l2cap_chan->ops->ready()")
Signed-off-by: Helen Koike <koike@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering).
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory.
Link: https://lore.kernel.org/linux-bluetooth/20260315132013.75ab40c5@kernel.org/T/#m1418f9c82eeff8510c1beaa21cf53af20db96c06
Fixes: 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
|
|
sco_recv_frame() reads conn->sk under sco_conn_lock() but immediately
releases the lock without holding a reference to the socket. A concurrent
close() can free the socket between the lock release and the subsequent
sk->sk_state access, resulting in a use-after-free.
Other functions in the same file (sco_sock_timeout(), sco_conn_del())
correctly use sco_sock_hold() to safely hold a reference under the lock.
Fix by using sco_sock_hold() to take a reference before releasing the
lock, and adding sock_put() on all exit paths.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path.
Fixes: aac23bf63659 ("Bluetooth: Implement LE L2CAP reassembly")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Syzbot reported a KASAN stack-out-of-bounds read in l2cap_build_cmd()
that is triggered by a malformed Enhanced Credit Based Connection Request.
The vulnerability stems from l2cap_ecred_conn_req(). The function allocates
a local stack buffer (`pdu`) designed to hold a maximum of 5 Source Channel
IDs (SCIDs), totaling 18 bytes. When an attacker sends a request with more
than 5 SCIDs, the function calculates `rsp_len` based on this unvalidated
`cmd_len` before checking if the number of SCIDs exceeds
L2CAP_ECRED_MAX_CID.
If the SCID count is too high, the function correctly jumps to the
`response` label to reject the packet, but `rsp_len` retains the
attacker's oversized value. Consequently, l2cap_send_cmd() is instructed
to read past the end of the 18-byte `pdu` buffer, triggering a
KASAN panic.
Fix this by moving the assignment of `rsp_len` to after the `num_scid`
boundary check. If the packet is rejected, `rsp_len` will safely
remain 0, and the error response will only read the 8-byte base header
from the stack.
Fixes: c28d2bff7044 ("Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short")
Reported-by: syzbot+b7f3e7d9a596bf6a63e3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b7f3e7d9a596bf6a63e3
Tested-by: syzbot+b7f3e7d9a596bf6a63e3@syzkaller.appspotmail.com
Signed-off-by: Minseo Park <jacob.park.9436@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, Bluetooth and netfilter.
Nothing too exciting here, mostly fixes for corner cases.
Current release - fix to a fix:
- bonding: prevent potential infinite loop in bond_header_parse()
Current release - new code bugs:
- wifi: mac80211: check tdls flag in ieee80211_tdls_oper
Previous releases - regressions:
- af_unix: give up GC if MSG_PEEK intervened
- netfilter: conntrack: add missing netlink policy validations
- NFC: nxp-nci: allow GPIOs to sleep"
* tag 'net-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
MPTCP: fix lock class name family in pm_nl_create_listen_socket
icmp: fix NULL pointer dereference in icmp_tag_validation()
net: dsa: bcm_sf2: fix missing clk_disable_unprepare() in error paths
net: shaper: protect from late creation of hierarchy
net: shaper: protect late read accesses to the hierarchy
net: mvpp2: guard flow control update with global_tx_fc in buffer switching
nfnetlink_osf: validate individual option lengths in fingerprints
netfilter: nf_tables: release flowtable after rcu grace period on error
netfilter: bpf: defer hook memory release until rcu readers are done
net: bonding: fix NULL deref in bond_debug_rlb_hash_show
udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n
net/mlx5e: Fix race condition during IPSec ESN update
net/mlx5e: Prevent concurrent access to IPSec ASO context
net/mlx5: qos: Restrict RTNL area to avoid a lock cycle
ipv6: add NULL checks for idev in SRv6 paths
NFC: nxp-nci: allow GPIOs to sleep
net: macb: fix uninitialized rx_fs_lock
net: macb: fix use-after-free access to PTP clock
netdevsim: drop PSP ext ref on forward failure
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
...
|
|
In mptcp_pm_nl_create_listen_socket(), use entry->addr.family
instead of sk->sk_family for lock class setup. The 'sk' parameter
is a netlink socket, not the MPTCP subflow socket being created.
Fixes: cee4034a3db1 ("mptcp: fix lockdep false positive in mptcp_pm_nl_create_listen_socket()")
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260319112159.3118874-1-lixiasong1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
icmp_tag_validation() unconditionally dereferences the result of
rcu_dereference(inet_protos[proto]) without checking for NULL.
The inet_protos[] array is sparse -- only about 15 of 256 protocol
numbers have registered handlers. When ip_no_pmtu_disc is set to 3
(hardened PMTU mode) and the kernel receives an ICMP Fragmentation
Needed error with a quoted inner IP header containing an unregistered
protocol number, the NULL dereference causes a kernel panic in
softirq context.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143)
Call Trace:
<IRQ>
icmp_rcv (net/ipv4/icmp.c:1527)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207)
ip_local_deliver_finish (net/ipv4/ip_input.c:242)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
__netif_receive_skb_one_core (net/core/dev.c:6164)
process_backlog (net/core/dev.c:6628)
handle_softirqs (kernel/softirq.c:561)
</IRQ>
Add a NULL check before accessing icmp_strict_tag_validation. If the
protocol has no registered handler, return false since it cannot
perform strict tag validation.
Fixes: 8ed1dc44d3e9 ("ipv4: introduce hardened ip_no_pmtu_disc mode")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260318130558.1050247-4-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access
to so->tx.buf. isotp_release() waits for ISOTP_IDLE via
wait_event_interruptible() and then calls kfree(so->tx.buf).
If a signal interrupts the wait_event_interruptible() inside close()
while tx.state is ISOTP_SENDING, the loop exits early and release
proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf)
while sendmsg may still be reading so->tx.buf for the final CAN frame
in isotp_fill_dataframe().
The so->tx.buf can be allocated once when the standard tx.buf length needs
to be extended. Move the kfree() of this potentially extended tx.buf to
sk_destruct time when either isotp_sendmsg() and isotp_release() are done.
Fixes: 96d1c81e6a04 ("can: isotp: add module parameter for maximum pdu size")
Cc: stable@vger.kernel.org
Reported-by: Ali Norouzi <ali.norouzi@keysight.com>
Co-developed-by: Ali Norouzi <ali.norouzi@keysight.com>
Signed-off-by: Ali Norouzi <ali.norouzi@keysight.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260319-fix-can-gw-and-can-isotp-v2-2-c45d52c6d2d8@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx():
int from = calc_idx(crc8->from_idx, cf->len);
int to = calc_idx(crc8->to_idx, cf->len);
int res = calc_idx(crc8->result_idx, cf->len);
if (from < 0 || to < 0 || res < 0)
return;
However, the loop and the result write then use the raw s8 fields directly
instead of the computed variables:
for (i = crc8->from_idx; ...) /* BUG: raw negative index */
cf->data[crc8->result_idx] = ...; /* BUG: raw negative index */
With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame,
calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with
i = -64, reading cf->data[-64], and the write goes to cf->data[-64].
This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the
start of the canfd_frame on the heap.
The companion function cgw_csum_xor_rel() uses `from`/`to`/`res`
correctly throughout; fix cgw_csum_crc8_rel() to match.
Confirmed with KASAN on linux-7.0-rc2:
BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0
Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62
To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed.
Fixes: 456a8a646b25 ("can: gw: add support for CAN FD frames")
Cc: stable@vger.kernel.org
Reported-by: Ali Norouzi <ali.norouzi@keysight.com>
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Ali Norouzi <ali.norouzi@keysight.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260319-fix-can-gw-and-can-isotp-v2-1-c45d52c6d2d8@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*:
1) Fix UaF when netfilter bpf link goes away while nfnetlink dumps
current hook list, we have to wait until rcu readers are gone.
2) Fix UaF when flowtable fails to register all devices, similar
bug as 1). From Pablo Neira Ayuso.
3) nfnetlink_osf fails to properly validate option length fields.
From Weiming Shi.
netfilter pull request nf-26-03-19
* tag 'nf-26-03-19' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
nfnetlink_osf: validate individual option lengths in fingerprints
netfilter: nf_tables: release flowtable after rcu grace period on error
netfilter: bpf: defer hook memory release until rcu readers are done
====================
Link: https://patch.msgid.link/20260319093834.19933-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Aside from various small improvements/cleanups, not much:
- cfg80211/mac80211: S1G and UHR improvements
- hwsim: incumbent signal report test support
* tag 'wireless-next-2026-03-19' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (31 commits)
qtnfmac: use alloc_netdev macro for single queue devices
wifi: libertas: don't kill URBs in interrupt context
wifi: libertas: use USB anchors for tracking in-flight URBs
wifi: nl80211: use int for band coming from netlink
wifi: rsi_91x_usb: do not pause rfkill polling when stopping mac80211
wifi: mac80211: fix STA link removal during link removal
wifi: nl80211: reject S1G/60G with HT chantype
wifi: ieee80211: fix definition of EHT-MCS 15 in MRU
wifi: cfg80211: check non-S1G width with S1G chandef
wifi: cfg80211: restrict cfg80211_chandef_create() to only HT-based bands
wifi: mac80211: don't use cfg80211_chandef_create() for default chandef
wifi: mac80211: Remove deleted sta links in ieee80211_ml_reconf_work()
wifi: b43: use register definitions in nphy_op_software_rfkill
wifi: cfg80211: split control freq check from chandef check
wifi: mac80211: always use full chanctx compatible check
wifi: mac80211: refactor chandef tracing macros
wifi: mac80211: validate HE 6 GHz operation when EHT is used
wifi: nl80211: split out UHR operation information
wifi: mwifiex: drop redundant device reference
wifi: rt2x00: drop redundant device reference
...
====================
Link: https://patch.msgid.link/20260319082439.79875-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 80b5f90158d1 ("can: statistics: use atomic access in hot path")
fixed a KCSAN issue in can_receive() but missed to convert the 'matches'
variable used in can_rcv_filter().
Fixes: 80b5f90158d1 ("can: statistics: use atomic access in hot path")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260318173413.28235-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
We look up a netdev during prep of Netlink ops (pre- callbacks)
and take a ref to it. Then later in the body of the callback
we take its lock or RCU which are the actual protections.
The netdev may get unregistered in between the time we take
the ref and the time we lock it. We may allocate the hierarchy
after flush has already run, which would lead to a leak.
Take the instance lock in pre- already, this saves us from the race
and removes the need for dedicated lock/unlock callbacks completely.
After all, if there's any chance of write happening concurrently
with the flush - we're back to leaking the hierarchy.
We may take the lock for devices which don't support shapers but
we're only dealing with SET operations here, not taking the lock
would be optimizing for an error case.
Fixes: 93954b40f6a4 ("net-shapers: implement NL set and delete operations")
Link: https://lore.kernel.org/20260309173450.538026-1-p@1g4.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260317161014.779569-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We look up a netdev during prep of Netlink ops (pre- callbacks)
and take a ref to it. Then later in the body of the callback
we take its lock or RCU which are the actual protections.
This is not proper, a conversion from a ref to a locked netdev
must include a liveness check (a check if the netdev hasn't been
unregistered already). Fix the read cases (those under RCU).
Writes needs a separate change to protect from creating the
hierarchy after flush has already run.
Fixes: 4b623f9f0f59 ("net-shapers: implement NL get operation")
Reported-by: Paul Moses <p@1g4.org>
Link: https://lore.kernel.org/20260309173450.538026-1-p@1g4.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260317161014.779569-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In network setup as below:
fastpath bypass
.----------------------------------------.
/ \
| IP - forwarding |
| / \ v
| / wan ...
| /
| |
| |
| brlan.1
| |
| +-------------------------------+
| | vlan 1 |
| | |
| | brlan (vlan-filtering) |
| | +---------------+
| | | DSA-SWITCH |
| | vlan 1 | |
| | to | |
| | untagged 1 vlan 1 |
| +---------------+---------------+
. / \
----->wlan1 lan0
. .
. ^
^ vlan 1 tagged packets
untagged packets
br_vlan_fill_forward_path_mode() sets DEV_PATH_BR_VLAN_UNTAG_HW when
filling in from brlan.1 towards wlan1. But it should be set to
DEV_PATH_BR_VLAN_UNTAG in this case. Using BR_VLFLAG_ADDED_BY_SWITCHDEV
is not correct. The dsa switchdev adds it as a foreign port.
The same problem for all foreignly added dsa vlans on the bridge.
First add the vlan, trying only native devices.
If this fails, we know this may be a vlan from a foreign device.
Use BR_VLFLAG_TAGGING_BY_SWITCHDEV to make sure DEV_PATH_BR_VLAN_UNTAG_HW
is set only when there if no foreign device involved.
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Link: https://patch.msgid.link/20260317110347.363875-1-ericwouds@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
chan.hdrlen is read once at channel registration by
ppp_register_net_channel(), and used to set the PPP net device's
hard_header_len. It was set to PPPOL2TP_L2TP_HDR_SIZE_NOSEQ (6), which
is 4 bytes too small if sequence numbers are later enabled via
setsockopt(PPPOL2TP_SO_SENDSEQ), causing unnecessary skb reallocations
on the TX path.
The setsockopt handler attempted to change netdev's hard_header_len by
updating chan.hdrlen, but the PPP layer never re-reads it after the
registration, so the update had no effect.
To avoid the unnecessary reallocations, set chan.hdrlen to
PPPOL2TP_L2TP_HDR_SIZE_SEQ (10) unconditionally at registration and
remove the ineffective update in the setsockopt callback.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260317054141.524879-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path.
Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Call synchronize_rcu() after unregistering the hooks from error path,
since a hook that already refers to this flowtable can be already
registered, exposing this flowtable to packet path and nfnetlink_hook
control plane.
This error path is rare, it should only happen by reaching the maximum
number hooks or by failing to set up to hardware offload, just call
synchronize_rcu().
There is a check for already used device hooks by different flowtable
that could result in EEXIST at this late stage. The hook parser can be
updated to perform this check earlier to this error path really becomes
rarely exercised.
Uncovered by KASAN reported as use-after-free from nfnetlink_hook path
when dumping hooks.
Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Yiming Qian reports UaF when concurrent process is dumping hooks via
nfnetlink_hooks:
BUG: KASAN: slab-use-after-free in nfnl_hook_dump_one.isra.0+0xe71/0x10f0
Read of size 8 at addr ffff888003edbf88 by task poc/79
Call Trace:
<TASK>
nfnl_hook_dump_one.isra.0+0xe71/0x10f0
netlink_dump+0x554/0x12b0
nfnl_hook_get+0x176/0x230
[..]
Defer release until after concurrent readers have completed.
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Fixes: 84601d6ee68a ("bpf: add bpf_link support for BPF_NETFILTER programs")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This was pointed out before, but there are issues with just
removing the <0 check since enum representation isn't fixed,
nla_type() returns int but really can only return small
non-negative values, etc. Now newer versions of sparse are
also starting to warn on it. Just use int for the band var.
Link: https://patch.msgid.link/20260316123050.8c2d9f3426a0.I86acfa785982993fbffd148cc59049991bd6158f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ieee80211_sta_free_link() only frees the link and doesn't
unhash it, so it can't be used here. Instead this needs
to use ieee80211_sta_remove_link(), which unhashes it. An
argument against it was that it also calls the driver and
that already happened, but calls to the driver removing a
link that's already removed are suppressed, so that's not
actually an issue. Use it to fix the hashtable.
Reported-and-tested-by: Jouni Malinen <j@w1.fi>
Fixes: 84674b03d8bf ("wifi: mac80211: Remove deleted sta links in ieee80211_ml_reconf_work()")
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260318180622.9240067117e9.I45fb2b7f04d75e48d2f3e9c6650ef9f54a314f5b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add two parameters for drivers supporting Rx CQE coalescing /
descriptor writeback.
ETHTOOL_A_COALESCE_RX_CQE_FRAMES:
Maximum number of frames that can be coalesced into a CQE or
writeback.
ETHTOOL_A_COALESCE_RX_CQE_NSECS:
Max time in nanoseconds after the first packet arrival in a
coalesced CQE or writeback to be sent.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260317191826.1346111-2-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few updates:
- cfg80211:
- guarantee pmsr work is cancelled
- mac80211:
- reject TDLS operations on non-TDLS stations
- fix crash in AP_VLAN bandwidth change
- fix leak or double-free on some TX preparation
failures
- remove keys needed for beacons _after_ stopping
those
- fix debugfs static branch race
- avoid underflow in inactive time
- fix another NULL dereference in mesh on invalid
frames
- ti/wlcore: avoid infinite realloc loop
* tag 'wireless-2026-03-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom
wifi: mac80211: fix NULL deref in mesh_matches_local()
wifi: mac80211: check tdls flag in ieee80211_tdls_oper
wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down
wifi: mac80211: Fix static_branch_dec() underflow for aql_disable.
mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations
wifi: mac80211: use jiffies_delta_to_msecs() for sta_info inactive times
wifi: mac80211: remove keys after disabling beaconing
wifi: mac80211_hwsim: fully initialise PMSR capabilities
====================
Link: https://patch.msgid.link/20260318172515.381148-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- avoid OGM aggregation when skb tailroom is insufficient, by Yang Yang
* tag 'batadv-net-pullrequest-20260317' of https://git.open-mesh.org/linux-merge:
batman-adv: avoid OGM aggregation when skb tailroom is insufficient
====================
Link: https://patch.msgid.link/20260317160002.1869478-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__in6_dev_get() can return NULL when the device has no IPv6 configuration
(e.g. MTU < IPV6_MIN_MTU or after NETDEV_UNREGISTER).
Add NULL checks for idev returned by __in6_dev_get() in both
seg6_hmac_validate_skb() and ipv6_srh_rcv() to prevent potential NULL
pointer dereferences.
Fixes: 1ababeba4a21 ("ipv6: implement dataplane support for rthdr type 4 (Segment Routing Header)")
Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support")
Signed-off-by: Minhong He <heminhong@kylinos.cn>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20260316073301.106643-1-heminhong@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix cache_request leak in cache_release()
- Fix heap overflow in the NFSv4.0 LOCK replay cache
- Hold net reference for the lifetime of /proc/fs/nfs/exports fd
- Defer sub-object cleanup in export "put" callbacks
* tag 'nfsd-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix heap overflow in NFSv4.0 LOCK replay cache
sunrpc: fix cache_request leak in cache_release
NFSD: Hold net reference for the lifetime of /proc/fs/nfs/exports fd
NFSD: Defer sub-object cleanup in export put callbacks
|
|
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260314065455.2462900-1-nbd@nbd.name
Fixes: 06be6b149f7e ("mac80211: add ieee80211_tx_prepare_skb() helper function")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
mesh_matches_local() unconditionally dereferences ie->mesh_config to
compare mesh configuration parameters. When called from
mesh_rx_csa_frame(), the parsed action-frame elements may not contain a
Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a
kernel NULL pointer dereference.
The other two callers are already safe:
- ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before
calling mesh_matches_local()
- mesh_plink_get_event() is only reached through
mesh_process_plink_frame(), which checks !elems->mesh_config, too
mesh_rx_csa_frame() is the only caller that passes raw parsed elements
to mesh_matches_local() without guarding mesh_config. An adjacent
attacker can exploit this by sending a crafted CSA action frame that
includes a valid Mesh ID IE but omits the Mesh Configuration IE,
crashing the kernel.
The captured crash log:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events_unbound cfg80211_wiphy_work
[...]
Call Trace:
<TASK>
? __pfx_mesh_matches_local (net/mac80211/mesh.c:65)
ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686)
[...]
ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802)
[...]
cfg80211_wiphy_work (net/wireless/core.c:426)
process_one_work (net/kernel/workqueue.c:3280)
? assign_work (net/kernel/workqueue.c:1219)
worker_thread (net/kernel/workqueue.c:3352)
? __pfx_worker_thread (net/kernel/workqueue.c:3385)
kthread (net/kernel/kthread.c:436)
[...]
ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255)
</TASK>
This patch adds a NULL check for ie->mesh_config at the top of
mesh_matches_local() to return false early when the Mesh Configuration
IE is absent.
Fixes: 2e3c8736820b ("mac80211: support functions for mesh")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260318034244.2595020-1-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit f620af11c27b ("xsk: avoid double checking against rx queue being
full") addressed a case in copy mode, when working with multi-buffer
xdp_buff, where we were peeking onto XSK Rx queue twice, to find out if
there is a space to produce descriptors.
Adjust ZC path to follow the same principle.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20260316140557.461288-1-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
UDP-Lite has been removed, and its error handler is no
longer found in either inet_protos[IPPROTO_UDPLITE] or
inet6_protos[IPPROTO_UDPLITE].
The recursion fixed by the protocol check in gue_err()
and gue6_err() no longer occurs with UDP-Lite.
Let's remove the checks.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260316133127.2646421-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a use-after-free in the clsact qdisc upon init/destroy rollback asymmetry.
The latter is achieved by first fully initializing a clsact instance, and
then in a second step having a replacement failure for the new clsact qdisc
instance. clsact_init() initializes ingress first and then takes care of the
egress part. This can fail midway, for example, via tcf_block_get_ext(). Upon
failure, the kernel will trigger the clsact_destroy() callback.
Commit 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry") details the
way how the transition is happening. If tcf_block_get_ext on the q->ingress_block
ends up failing, we took the tcx_miniq_inc reference count on the ingress
side, but not yet on the egress side. clsact_destroy() tests whether the
{ingress,egress}_entry was non-NULL. However, even in midway failure on the
replacement, both are in fact non-NULL with a valid egress_entry from the
previous clsact instance.
What we really need to test for is whether the qdisc instance-specific ingress
or egress side previously got initialized. This adds a small helper for checking
the miniq initialization called mini_qdisc_pair_inited, and utilizes that upon
clsact_destroy() in order to fix the use-after-free scenario. Convert the
ingress_destroy() side as well so both are consistent to each other.
Fixes: 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260313065531.98639-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
iptfs_clone_state() stores x->mode_data before allocating the reorder
window. If that allocation fails, the code frees the cloned state and
returns -ENOMEM, leaving x->mode_data pointing at freed memory.
The xfrm clone unwind later runs destroy_state() through x->mode_data,
so the failed clone path tears down IPTFS state that clone_state()
already freed.
Keep the cloned IPTFS state private until all allocations succeed so
failed clones leave x->mode_data unset. The destroy path already
handles a NULL mode_data pointer.
Fixes: 6be02e3e4f37 ("xfrm: iptfs: handle reordering of received packets")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moses <p@1g4.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When creating a flower classifier with an ipv4 address the
flow_dissector has both FLOW_DISSECTOR_KEY_IPV4_ADDRS and
FLOW_DISSECTOR_KEY_IPV6_ADDRS bits set in used_keys.
This happens because ipv4/ipv6 fields are a union and
FL_KEY_SET_IF_MASKED() will interpret either being set as both.
Removing the unions fixes this behavior without needing special handling
for union fields.
Example of a command that caused FLOW_DISSECTOR_KEY_IPV4_ADDRS and
FLOW_DISSECTOR_KEY_IPV6_ADDRS to be set:
tc filter add dev p1 ingress protocol ip flower skip_sw \
dst_ip 224.0.1.129 action trap
Signed-off-by: Cedric Jehasse <cedric.jehasse@luminex.be>
Link: https://patch.msgid.link/20260311-net-next-mv88e6xxx-tcam-v8-1-32dd5ba30002@luminex.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Whenever a TEQL devices has a lockless Qdisc as root, qdisc_reset should
be called using the seq_lock to avoid racing with the datapath. Failure
to do so may cause crashes like the following:
[ 238.028993][ T318] BUG: KASAN: double-free in skb_release_data (net/core/skbuff.c:1139)
[ 238.029328][ T318] Free of addr ffff88810c67ec00 by task poc_teql_uaf_ke/318
[ 238.029749][ T318]
[ 238.029900][ T318] CPU: 3 UID: 0 PID: 318 Comm: poc_teql_ke Not tainted 7.0.0-rc3-00149-ge5b31d988a41 #704 PREEMPT(full)
[ 238.029906][ T318] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 238.029910][ T318] Call Trace:
[ 238.029913][ T318] <TASK>
[ 238.029916][ T318] dump_stack_lvl (lib/dump_stack.c:122)
[ 238.029928][ T318] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 238.029940][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029944][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
...
[ 238.029957][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029969][ T318] kasan_report_invalid_free (mm/kasan/report.c:221 mm/kasan/report.c:563)
[ 238.029979][ T318] ? skb_release_data (net/core/skbuff.c:1139)
[ 238.029989][ T318] check_slab_allocation (mm/kasan/common.c:231)
[ 238.029995][ T318] kmem_cache_free (mm/slub.c:2637 (discriminator 1) mm/slub.c:6168 (discriminator 1) mm/slub.c:6298 (discriminator 1))
[ 238.030004][ T318] skb_release_data (net/core/skbuff.c:1139)
...
[ 238.030025][ T318] sk_skb_reason_drop (net/core/skbuff.c:1256)
[ 238.030032][ T318] pfifo_fast_reset (./include/linux/ptr_ring.h:171 ./include/linux/ptr_ring.h:309 ./include/linux/skb_array.h:98 net/sched/sch_generic.c:827)
[ 238.030039][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
...
[ 238.030054][ T318] qdisc_reset (net/sched/sch_generic.c:1034)
[ 238.030062][ T318] teql_destroy (./include/linux/spinlock.h:395 net/sched/sch_teql.c:157)
[ 238.030071][ T318] __qdisc_destroy (./include/net/pkt_sched.h:328 net/sched/sch_generic.c:1077)
[ 238.030077][ T318] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159)
[ 238.030089][ T318] ? __pfx_qdisc_graft (net/sched/sch_api.c:1091)
[ 238.030095][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030102][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030106][ T318] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 238.030114][ T318] tc_get_qdisc (net/sched/sch_api.c:1529 net/sched/sch_api.c:1556)
...
[ 238.072958][ T318] Allocated by task 303 on cpu 5 at 238.026275s:
[ 238.073392][ T318] kasan_save_stack (mm/kasan/common.c:58)
[ 238.073884][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5))
[ 238.074230][ T318] __kasan_slab_alloc (mm/kasan/common.c:369)
[ 238.074578][ T318] kmem_cache_alloc_node_noprof (./include/linux/kasan.h:253 mm/slub.c:4542 mm/slub.c:4869 mm/slub.c:4921)
[ 238.076091][ T318] kmalloc_reserve (net/core/skbuff.c:616 (discriminator 107))
[ 238.076450][ T318] __alloc_skb (net/core/skbuff.c:713)
[ 238.076834][ T318] alloc_skb_with_frags (./include/linux/skbuff.h:1383 net/core/skbuff.c:6763)
[ 238.077178][ T318] sock_alloc_send_pskb (net/core/sock.c:2997)
[ 238.077520][ T318] packet_sendmsg (net/packet/af_packet.c:2926 net/packet/af_packet.c:3019 net/packet/af_packet.c:3108)
[ 238.081469][ T318]
[ 238.081870][ T318] Freed by task 299 on cpu 1 at 238.028496s:
[ 238.082761][ T318] kasan_save_stack (mm/kasan/common.c:58)
[ 238.083481][ T318] kasan_save_track (mm/kasan/common.c:64 (discriminator 5) mm/kasan/common.c:79 (discriminator 5))
[ 238.085348][ T318] kasan_save_free_info (mm/kasan/generic.c:587 (discriminator 1))
[ 238.085900][ T318] __kasan_slab_free (mm/kasan/common.c:287)
[ 238.086439][ T318] kmem_cache_free (mm/slub.c:6168 (discriminator 3) mm/slub.c:6298 (discriminator 3))
[ 238.087007][ T318] skb_release_data (net/core/skbuff.c:1139)
[ 238.087491][ T318] consume_skb (net/core/skbuff.c:1451)
[ 238.087757][ T318] teql_master_xmit (net/sched/sch_teql.c:358)
[ 238.088116][ T318] dev_hard_start_xmit (./include/linux/netdevice.h:5324 ./include/linux/netdevice.h:5333 net/core/dev.c:3871 net/core/dev.c:3887)
[ 238.088468][ T318] sch_direct_xmit (net/sched/sch_generic.c:347)
[ 238.088820][ T318] __qdisc_run (net/sched/sch_generic.c:420 (discriminator 1))
[ 238.089166][ T318] __dev_queue_xmit (./include/net/sch_generic.h:229 ./include/net/pkt_sched.h:121 ./include/net/pkt_sched.h:117 net/core/dev.c:4196 net/core/dev.c:4802)
Workflow to reproduce:
1. Initialize a TEQL topology (dummy0 and ifb0 as slaves, teql0 up).
2. Start multiple sender workers continuously transmitting packets
through teql0 to drive teql_master_xmit().
3. In parallel, repeatedly delete and re-add the root qdisc on
dummy0 and ifb0 via RTNETLINK, forcing frequent teardown and reset activity
(teql_destroy() / qdisc_reset()).
4. After running both workloads concurrently for several iterations,
KASAN reports slab-use-after-free or double-free in the skb free path.
Fix this by moving dev_reset_queue to sch_generic.h and calling it, instead
of qdisc_reset, in teql_destroy since it handles both the lock and lockless
cases correctly for root qdiscs.
Fixes: 96009c7d500e ("sched: replace __QDISC_STATE_RUNNING bit with a spin lock")
Reported-by: Xianrui Dong <keenanat2000@gmail.com>
Tested-by: Xianrui Dong <keenanat2000@gmail.com>
Co-developed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260315155422.147256-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller reported a panic in smc_tcp_syn_recv_sock() [1].
smc_tcp_syn_recv_sock() is called in the TCP receive path
(softirq) via icsk_af_ops->syn_recv_sock on the clcsock (TCP
listening socket). It reads sk_user_data to get the smc_sock
pointer. However, when the SMC listen socket is being closed
concurrently, smc_close_active() sets clcsock->sk_user_data
to NULL under sk_callback_lock, and then the smc_sock itself
can be freed via sock_put() in smc_release().
This leads to two issues:
1) NULL pointer dereference: sk_user_data is NULL when
accessed.
2) Use-after-free: sk_user_data is read as non-NULL, but the
smc_sock is freed before its fields (e.g., queued_smc_hs,
ori_af_ops) are accessed.
The race window looks like this (the syzkaller crash [1]
triggers via the SYN cookie path: tcp_get_cookie_sock() ->
smc_tcp_syn_recv_sock(), but the normal tcp_check_req() path
has the same race):
CPU A (softirq) CPU B (process ctx)
tcp_v4_rcv()
TCP_NEW_SYN_RECV:
sk = req->rsk_listener
sock_hold(sk)
/* No lock on listener */
smc_close_active():
write_lock_bh(cb_lock)
sk_user_data = NULL
write_unlock_bh(cb_lock)
...
smc_clcsock_release()
sock_put(smc->sk) x2
-> smc_sock freed!
tcp_check_req()
smc_tcp_syn_recv_sock():
smc = user_data(sk)
-> NULL or dangling
smc->queued_smc_hs
-> crash!
Note that the clcsock and smc_sock are two independent objects
with separate refcounts. TCP stack holds a reference on the
clcsock, which keeps it alive, but this does NOT prevent the
smc_sock from being freed.
Fix this by using RCU and refcount_inc_not_zero() to safely
access smc_sock. Since smc_tcp_syn_recv_sock() is called in
the TCP three-way handshake path, taking read_lock_bh on
sk_callback_lock is too heavy and would not survive a SYN
flood attack. Using rcu_read_lock() is much more lightweight.
- Set SOCK_RCU_FREE on the SMC listen socket so that
smc_sock freeing is deferred until after the RCU grace
period. This guarantees the memory is still valid when
accessed inside rcu_read_lock().
- Use rcu_read_lock() to protect reading sk_user_data.
- Use refcount_inc_not_zero(&smc->sk.sk_refcnt) to pin the
smc_sock. If the refcount has already reached zero (close
path completed), it returns false and we bail out safely.
Note: smc_hs_congested() has a similar lockless read of
sk_user_data without rcu_read_lock(), but it only checks for
NULL and accesses the global smc_hs_wq, never dereferencing
any smc_sock field, so it is not affected.
Reproducer was verified with mdelay injection and smc_run,
the issue no longer occurs with this patch applied.
[1] https://syzkaller.appspot.com/bug?extid=827ae2bfb3a3529333e9
Fixes: 8270d9c21041 ("net/smc: Limit backlog connections")
Reported-by: syzbot+827ae2bfb3a3529333e9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67eaf9b8.050a0220.3c3d88.004a.GAE@google.com/T/
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260312092909.48325-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.
Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called.
Fixes: 950803f72547 ("bonding: fix type confusion in bond_setup_by_slave()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Tested-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20260315104152.1436867-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Seems we have been carrying around repeated defines for unaligned mode
logic. Remove redundant ones.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260313111931.438911-1-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of only using the 32 low order bits of the local address,
use all of them.
Xor net_hash_mix(net) with the 32 high order bits of the local address
so that we can use __jhash_mix() three times.
If we were hashing 4 extra bytes, we would need one __jhash_final()
which is a bit expensive.
Using net_hash_mix() at the beginning allows better register allocation.
We no longer use a cascade of two jhash and inet6_ehash_secret,
this was dubious/weak.
Add a comment explaining why @lport is not part of the jhash computation.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-24 (-24)
Function old new delta
inet6_ehashfn 330 306 -24
Total: Before=24855958, After=24855934, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260313120346.3378811-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot was able to trigger a crash in skb_put() [1]
Issue is that pfkey_send_migrate() does not check old/new families,
and that set_ipsecrequest() @family argument was truncated,
thus possibly overfilling the skb.
Validate families early, do not wait set_ipsecrequest().
[1]
skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev:<NULL>
kernel BUG at net/core/skbuff.c:214 !
Call Trace:
<TASK>
skb_over_panic net/core/skbuff.c:219 [inline]
skb_put+0x159/0x210 net/core/skbuff.c:2655
skb_put_zero include/linux/skbuff.h:2788 [inline]
set_ipsecrequest net/key/af_key.c:3532 [inline]
pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636
km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848
xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705
xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150
Fixes: 08de61beab8a ("[PFKEYV2]: Extension for dynamic update of endpoint address(es)")
Reported-by: syzbot+b518dfc8e021988fbd55@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69b5933c.050a0220.248e02.00f2.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
A XFRM_MSG_NEWSPDINFO request can queue the per-net work item
policy_hthresh.work onto the system workqueue.
The queued callback, xfrm_hash_rebuild(), retrieves the enclosing
struct net via container_of(). If the net namespace is torn down
before that work runs, the associated struct net may already have
been freed, and xfrm_hash_rebuild() may then dereference stale memory.
xfrm_policy_fini() already flushes policy_hash_work during teardown,
but it does not synchronize policy_hthresh.work.
Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the
queued work cannot outlive the net namespace teardown and access a
freed struct net.
Fixes: 880a6fab8f6b ("xfrm: configure policy hash table thresholds by netlink")
Signed-off-by: Minwoo Ra <raminwo0202@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Multiple PFs may reside on the same physical chip, running a single
firmware. Some of the resources and configurations may be shared among
these PFs. Currently, there is no good object to pin the configuration
knobs on.
Introduce a shared devlink instance, instantiated upon probe of
the first PF and removed during remove of the last PF. The shared
devlink instance is not backed by any device device, as there is
no PCI device related to it.
The implementation uses reference counting to manage the lifecycle:
each PF that probes calls devlink_shd_get() to get or create
the shared instance, and calls devlink_shd_put() when it removes.
The shared instance is automatically destroyed when the last PF removes.
Example:
pci/0000:08:00.0: index 0
nested_devlink:
auxiliary/mlx5_core.eth.0
devlink_index/1: index 1
nested_devlink:
pci/0000:08:00.0
pci/0000:08:00.1
auxiliary/mlx5_core.eth.0: index 2
pci/0000:08:00.1: index 3
nested_devlink:
auxiliary/mlx5_core.eth.1
auxiliary/mlx5_core.eth.1: index 4
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-12-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow devlink_alloc_ns() to be called with dev=NULL to support
device-less devlink instances. When dev is NULL, the instance is
identified over netlink using "devlink_index" as bus_name and
the decimal index value as dev_name.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-11-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce devl_warn() macro that uses dev_warn() when a backing
device is available and falls back to pr_warn() otherwise. Convert
all dev_warn() calls in port.c to use it, preparing for devlink
instances without a backing device.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-10-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation to dev-less devlinks, add devlink_dev_driver_name()
that returns the driver name stored in devlink struct, and use it in
all trace events.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-9-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce __devlink_alloc() as an internal devlink allocator that
accepts a struct device_driver pointer and stores it in the devlink
instance. This allows internal devlink code (e.g. shared instances)
to associate a driver with a devlink instance without need to pass dev
pointer.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-8-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the notification filter descriptor with devlink_index so
that userspace can filter notifications by devlink instance index
in addition to bus_name/dev_name.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260312100407.551173-7-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
