| Age | Commit message (Collapse) | Author |
|---|
|
pcpu_num = 0 is a valid value. The marker for "unset pcpu_num" which
makes copy_to_user_state_extra not add the XFRMA_SA_PCPU attribute is
UINT_MAX.
Fixes: 1ddf9916ac09 ("xfrm: Add support for per cpu xfrm state handling.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
We're returning an error caused by invalid user input without setting
an extack. Add one.
Fixes: 1ddf9916ac09 ("xfrm: Add support for per cpu xfrm state handling.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
These sysctls were added in 4cdf507d5452 ("icmp: add a global rate
limitation") and their default values might be too small.
Some network tools send probes to closed UDP ports from many hosts
to estimate proportion of packet drops on a particular target.
This patch sets both sysctls to 10000.
Note the per-peer rate-limit (as described in RFC 4443 2.4 (f))
intent is still enforced.
This also increases security, see b38e7819cae9
("icmp: randomize the global rate limiter") for reference.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223161742.929830-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function is only called from tcp_v6_mtu_reduced() and can be
(auto)inlined by the compiler.
Note that inet6_csk_route_socket() is no longer (auto)inlined,
which is a good thing as it is slow path.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/2 grow/shrink: 2/0 up/down: 93/-129 (-36)
Function old new delta
tcp_v6_mtu_reduced 139 228 +89
inet6_csk_route_socket 486 490 +4
__pfx_inet6_csk_update_pmtu 16 - -16
inet6_csk_update_pmtu 113 - -113
Total: Before=25076512, After=25076476, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223153047.886683-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For RPC workloads, we alternate tcp_schedule_loss_probe() calls from
output path and from input path, with tp->packets_out value
oscillating between !zero and zero, leading to poor branch prediction.
Move tp->packets_out check from tcp_schedule_loss_probe() to
tcp_set_xmit_timer().
We avoid one call to tcp_schedule_loss_probe() from tcp_ack()
path for typical RPC workloads, while improving branch prediction.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223113501.4070245-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_v{4,6}_send_check() are only called from tcp_output.c
and should be made static so that the compiler does not need
to put an out of line copy of them.
Remove (struct inet_connection_sock_af_ops) send_check field
and use instead @net_header_len.
Move @net_header_len close to @queue_xmit for data locality
as both are used in TCP tx fast path.
$ scripts/bloat-o-meter -t vmlinux.2 vmlinux.3
add/remove: 0/2 grow/shrink: 0/3 up/down: 0/-172 (-172)
Function old new delta
__tcp_transmit_skb 3426 3423 -3
tcp_v4_send_check 136 132 -4
mptcp_subflow_init 777 763 -14
__pfx_tcp_v6_send_check 16 - -16
tcp_v6_send_check 135 - -135
Total: Before=25143196, After=25143024, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223100729.3761597-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move tcp_v6_send_check() so that __tcp_transmit_skb() can inline it.
$ scripts/bloat-o-meter -t vmlinux.1 vmlinux.2
add/remove: 0/0 grow/shrink: 1/0 up/down: 105/0 (105)
Function old new delta
__tcp_transmit_skb 3321 3426 +105
Total: Before=25143091, After=25143196, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223100729.3761597-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Inline __tcp_v4_send_check(), like __tcp_v6_send_check().
Move tcp_v4_send_check() to tcp_output.c close to
its fast path caller (__tcp_transmit_skb()).
Note __tcp_v4_send_check() is still out-of-line for tcp4_gso_segment()
because it is called in an unlikely() section.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-9 (-9)
Function old new delta
__tcp_v4_send_check 130 121 -9
Total: Before=25143100, After=25143091, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223100729.3761597-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently non-zc xsk rx path for multi-buffer case checks twice if xsk
rx queue has enough space for producing descriptors:
1.
if (xskq_prod_nb_free(xs->rx, num_desc) < num_desc) {
xs->rx_queue_full++;
return -ENOBUFS;
}
2.
__xsk_rcv_zc(xs, xskb, copied - meta_len, rem ? XDP_PKT_CONTD : 0);
-> err = xskq_prod_reserve_desc(xs->rx, addr, len, flags);
-> if (xskq_prod_is_full(q))
Second part is redundant as in 1. we already peeked onto rx queue and
checked that there is enough space to produce given amount of
descriptors.
Provide helper functions that will skip it and therefore optimize code.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20260218150000.301176-1-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This function has a single caller in net/ipv6/udp.c.
Move it there so that the compiler can decide to (auto)inline
it if he prefers to. IBT glue is removed anyway.
With clang, we can see it was able to inline it and also
inlined one other helper at the same time.
UDPLITE removal will also help.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 840/-785 (55)
Function old new delta
__udp6_lib_rcv 1247 2087 +840
__pfx_udp6_csum_init 16 - -16
udp6_csum_init 769 - -769
Total: Before=25074399, After=25074454, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223093445.3696368-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 6511882cdd82 ("mptcp: allocate fwd memory separately
on the rx and tx path") __lock_sock() can be static again.
Make sure __lock_sock() is not inlined, so that lock_sock_nested()
no longer needs a stack canary.
Add a noinline attribute on lock_sock_nested() so that calls
to lock_sock() from net/core/sock.c are not inlined,
none of them are fast path to deserve that:
- sockopt_lock_sock()
- sock_set_reuseport()
- sock_set_reuseaddr()
- sock_set_mark()
- sock_set_keepalive()
- sock_no_linger()
- sock_bindtoindex()
- sk_wait_data()
- sock_set_rcvbuf()
$ scripts/bloat-o-meter -t vmlinux.old vmlinux
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-312 (-312)
Function old new delta
__lock_sock 192 188 -4
__lock_sock_fast 239 86 -153
lock_sock_nested 227 72 -155
Total: Before=24888707, After=24888395, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223092716.3673939-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- purge error queues in socket destructors
- hci_sync: Fix CIS host feature condition
- L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ
- L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short
- L2CAP: Fix response to L2CAP_ECRED_CONN_REQ
- L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ
- L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
- hci_qca: Cleanup on all setup failures
* tag 'for-net-2026-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
Bluetooth: L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ
Bluetooth: Fix CIS host feature condition
Bluetooth: L2CAP: Fix response to L2CAP_ECRED_CONN_REQ
Bluetooth: hci_qca: Cleanup on all setup failures
Bluetooth: purge error queues in socket destructors
Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short
Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ
====================
Link: https://patch.msgid.link/20260223211634.3800315-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. Replace
it with the safer strscpy(). Use the two-argument version of strscpy()
to copy 'cfg->ifname'.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260223074137.321862-1-thorsten.blum@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared.
Link: https://lore.kernel.org/all/20260205145104.iWinkXHv@linutronix.de
Fixes: b245be1f4db1a ("net-timestamp: no-payload only sysctl")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260220183858.N4ERjFW6@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot reported a recursive lock warning in rds_tcp_get_peer_sport() as
it calls inet6_getname() which acquires the socket lock that was already
held by __release_sock().
kworker/u8:6/2985 is trying to acquire lock:
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1709 [inline]
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: inet6_getname+0x15d/0x650 net/ipv6/af_inet6.c:533
but task is already holding lock:
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1709 [inline]
ffff88807a07aa20 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_sock_set_cork+0x2c/0x2e0 net/ipv4/tcp.c:3694
lock_sock_nested+0x48/0x100 net/core/sock.c:3780
lock_sock include/net/sock.h:1709 [inline]
inet6_getname+0x15d/0x650 net/ipv6/af_inet6.c:533
rds_tcp_get_peer_sport net/rds/tcp_listen.c:70 [inline]
rds_tcp_conn_slots_available+0x288/0x470 net/rds/tcp_listen.c:149
rds_recv_hs_exthdrs+0x60f/0x7c0 net/rds/recv.c:265
rds_recv_incoming+0x9f6/0x12d0 net/rds/recv.c:389
rds_tcp_data_recv+0x7f1/0xa40 net/rds/tcp_recv.c:243
__tcp_read_sock+0x196/0x970 net/ipv4/tcp.c:1702
rds_tcp_read_sock net/rds/tcp_recv.c:277 [inline]
rds_tcp_data_ready+0x369/0x950 net/rds/tcp_recv.c:331
tcp_rcv_established+0x19e9/0x2670 net/ipv4/tcp_input.c:6675
tcp_v6_do_rcv+0x8eb/0x1ba0 net/ipv6/tcp_ipv6.c:1609
sk_backlog_rcv include/net/sock.h:1185 [inline]
__release_sock+0x1b8/0x3a0 net/core/sock.c:3213
Reading from the socket struct directly is safe from possible paths. For
rds_tcp_accept_one(), the socket has just been accepted and is not yet
exposed to concurrent access. For rds_tcp_conn_slots_available(), direct
access avoids the recursive deadlock seen during backlog processing
where the socket lock is already held from the __release_sock().
However, rds_tcp_conn_slots_available() is also called from the normal
softirq path via tcp_data_ready() where the lock is not held. This is
also safe because inet_dport is a stable 16 bits field. A READ_ONCE()
annotation as the value might be accessed lockless in a concurrent
access context.
Note that it is also safe to call rds_tcp_conn_slots_available() from
rds_conn_shutdown() because the fan-out is disabled.
Fixes: 9d27a0fb122f ("net/rds: Trigger rds_send_ping() more than once")
Reported-by: syzbot+5efae91f60932839f0a5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5efae91f60932839f0a5
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260219075738.4403-1-fmancera@suse.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19).
Fixes: 8f2535b92d68 ("mac80211: process the CSA frame for mesh accordingly")
Cc: stable@vger.kernel.org
Signed-off-by: Vahagn Vardanian <vahagn@redrays.io>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
TIPC uses named table to store TIPC services represented by type and
instance. Each time an application calls TIPC API bind() to bind a
type/instance to a socket, an entry is created and inserted into the
named table. It looks like this:
named table:
key1, entry1 (type, instance ...)
key2, entry2 (type, instance ...)
In the above table, each entry represents a route for sending data
from one socket to the other. For all publications originated from
the same node, the key is UNIQUE to identify each entry.
It is calculated by this formula:
key = socket portid + number of bindings + 1 (1)
where:
- socket portid: unique and calculated by using linux kernel function
get_random_u32_below(). So, the value is randomized.
- number of bindings: the number of times a type/instance pair is bound
to a socket. This number is linearly increased,
starting from 0.
While the socket portid is unique and randomized by linux kernel, the
linear increment of "number of bindings" in formula (1) makes "key" not
unique anymore. For example:
- Socket 1 is created with its associated port number 20062001. Type 1000,
instance 1 is bound to socket 1:
key1: 20062001 + 0 + 1 = 20062002
Then, bind() is called a second time on Socket 1 to by the same type 1000,
instance 1:
key2: 20062001 + 1 + 1 = 20062003
Named table:
key1 (20062002), entry1 (1000, 1 ...)
key2 (20062003), entry2 (1000, 1 ...)
- Socket 2 is created with its associated port number 20062002. Type 1000,
instance 1 is bound to socket 2:
key3: 20062002 + 0 + 1 = 20062003
TIPC looks up the named table and finds out that key2 with the same value
already exists and rejects the insertion into the named table.
This leads to failure of bind() call from application on Socket 2 with error
message EINVAL "Invalid argument".
This commit fixes this issue by adding more port id checking to make sure
that the key is unique to publications originated from the same port id
and node.
Fixes: 218527fe27ad ("tipc: replace name table service range array with rb tree")
Signed-off-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260220050541.237962-1-tung.quang.nguyen@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller reported a warning in kcm_write_msgs() when processing a
message with a zero-fragment skb in the frag_list.
When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb,
it allocates a new skb (tskb) and links it into the frag_list before
copying data. If the copy subsequently fails (e.g. -EFAULT from
user memory), tskb remains in the frag_list with zero fragments:
head skb (msg being assembled, NOT yet in sk_write_queue)
+-----------+
| frags[17] | (MAX_SKB_FRAGS, all filled with data)
| frag_list-+--> tskb
+-----------+ +----------+
| frags[0] | (empty! copy failed before filling)
+----------+
For SOCK_SEQPACKET with partial data already copied, the error path
saves this message via partial_message for later completion. For
SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a
subsequent zero-length write(fd, NULL, 0) completes the message and
queues it to sk_write_queue. kcm_write_msgs() then walks the
frag_list and hits:
WARN_ON(!skb_shinfo(skb)->nr_frags)
TCP has a similar pattern where skbs are enqueued before data copy
and cleaned up on failure via tcp_remove_empty_skb(). KCM was
missing the equivalent cleanup.
Fix this by tracking the predecessor skb (frag_prev) when allocating
a new frag_list entry. On error, if the tail skb has zero frags,
use frag_prev to unlink and free it in O(1) without walking the
singly-linked frag_list. frag_prev is safe to dereference because
the entire message chain is only held locally (or in kcm->seq_skb)
and is not added to sk_write_queue until MSG_EOR, so the send path
cannot free it underneath us.
Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log
if the condition is somehow hit repeatedly.
There are currently no KCM selftests in the kernel tree; a simple
reproducer is available at [1].
[1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa
Reported-by: syzbot+52624bdfbf2746d37d70@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000269a1405a12fdc77@google.com/T/
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260219014256.370092-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This issue was discovered during a code audit.
After cancel_delayed_work_sync() is called from tls_sk_proto_close(),
tx_work_handler() can still be scheduled from paths such as the
Delayed ACK handler or ksoftirqd.
As a result, the tx_work_handler() worker may dereference a freed
TLS object.
The following is a simple race scenario:
cpu0 cpu1
tls_sk_proto_close()
tls_sw_cancel_work_tx()
tls_write_space()
tls_sw_write_space()
if (!test_and_set_bit(BIT_TX_SCHEDULED, &tx_ctx->tx_bitmask))
set_bit(BIT_TX_SCHEDULED, &ctx->tx_bitmask);
cancel_delayed_work_sync(&ctx->tx_work.work);
schedule_delayed_work(&tx_ctx->tx_work.work, 0);
To prevent this race condition, cancel_delayed_work_sync() is
replaced with disable_delayed_work_sync().
Fixes: f87e62d45e51 ("net/tls: remove close callback sock unlock/lock around TX work flush")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/aZgsFO6nfylfvLE7@v4bel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Blamed commit made the assumption that the RPS table for each receive
queue would have the same size, and that it would not change.
Compute flow_id in set_rps_cpu(), do not assume we can use the value
computed by get_rps_cpu(). Otherwise we risk out-of-bound access
and/or crashes.
Fixes: 48aa30443e52 ("net: Cache hash and flow_id to avoid recalculation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Krishna Kumar <krikku@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260220222605.3468081-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE.
Link: https://lore.kernel.org/linux-bluetooth/5782243.rdbgypaU67@n9w6sw14/
Fixes: 27e2d4c8d28b ("Bluetooth: Add basic LE L2CAP connect request receiving support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
|
|
L2CAP_ECRED_CONN_REQ
Upon receiving L2CAP_ECRED_CONN_REQ the given MTU shall be checked
against the suggested MTU of the listening socket as that is required
by the likes of PTS L2CAP/ECFC/BV-27-C test which expects
L2CAP_CR_LE_UNACCEPT_PARAMS if the MTU is lowers than socket omtu.
In order to be able to set chan->omtu the code now allows setting
setsockopt(BT_SNDMTU), but it is only allowed when connection has not
been stablished since there is no procedure to reconfigure the output
MTU.
Link: https://github.com/bluez/bluez/issues/1895
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes the condition for sending the LE Set Host Feature command.
The command is sent to indicate host support for Connected Isochronous
Streams in this case. It has been observed that the system could not
initialize BIS-only capable controllers because the controllers do not
support the command.
As per Core v6.2 | Vol 4, Part E, Table 3.1 the command shall be
supported if CIS Central or CIS Peripheral is supported; otherwise,
the command is optional.
Fixes: 709788b154ca ("Bluetooth: hci_core: Fix using {cis,bis}_capable for current settings")
Cc: stable@vger.kernel.org
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Similar to 03dba9cea72f ("Bluetooth: L2CAP: Fix not responding with
L2CAP_CR_LE_ENCRYPTION") the result code L2CAP_CR_LE_ENCRYPTION shall
be used when BT_SECURITY_MEDIUM is set since that means security mode 2
which mean it doesn't require authentication which results in
qualification test L2CAP/ECFC/BV-32-C failing.
Link: https://github.com/bluez/bluez/issues/1871
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue.
Fixes: 134f4b39df7b ("Bluetooth: add support for skb TX SND/COMPLETION timestamping")
Reported-by: syzbot+7ff4013eabad1407b70a@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=7ff4013eabad1407b70a
Cc: stable@vger.kernel.org
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Test L2CAP/ECFC/BV-26-C expect the response to L2CAP_ECRED_CONN_REQ with
and MTU value < L2CAP_ECRED_MIN_MTU (64) to be L2CAP_CR_LE_INVALID_PARAMS
rather than L2CAP_CR_LE_UNACCEPT_PARAMS.
Also fix not including the correct number of CIDs in the response since
the spec requires all CIDs being rejected to be included in the
response.
Link: https://github.com/bluez/bluez/issues/1868
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes responding with an invalid result caused by checking the
wrong size of CID which should have been (cmd_len - sizeof(*req)) and
on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which
is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C:
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 64
MPS: 64
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reserved (0x000c)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002)
when more than one channel gets its MPS reduced:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8
MTU: 264
MPS: 99
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 65
MPS: 64
! Source CID: 85
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 672
! MPS: 63
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Result: Reconfiguration failed - other unacceptable parameters (0x0004)
Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8
MTU: 84
! MPS: 71
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Link: https://github.com/bluez/bluez/issues/1865
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
link_id is taken from the ML Reconfiguration element (control & 0x000f),
so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS
(15) elements, so index 15 is out-of-bounds. Skip subelements with
link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds
write.
Fixes: 8eb8dd2ffbbb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Reported-by: Ariel Silver <arielsilver77@gmail.com>
Signed-off-by: Ariel Silver <arielsilver77@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260220101129.1202657-1-Ariel.Silver@cybereason.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, mac80211 only initializes default WMM parameters
on the deflink during do_open(). For MLO cases, this
leaves the additional links without proper WMM defaults
if hostapd does not supply per-link WMM parameters, leading
to inconsistent QoS behavior across links.
Set default WMM parameters for each link during
ieee80211_vif_update_links(), because this ensures all
individual links in an MLD have valid WMM settings during
bring-up and behave consistently across different BSS.
Signed-off-by: Ramanathan Choodamani <quic_rchoodam@quicinc.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Link: https://patch.msgid.link/20260205094216.3093542-1-aishwarya.r@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The radiotap parser is currently only used with the radiotap
namespace (not with vendor namespaces), but if the undefined
field 18 is used, the alignment/size is unknown as well. In
this case, iterator->_next_ns_data isn't initialized (it's
only set for skipping vendor namespaces), and syzbot points
out that we later compare against this uninitialized value.
Fix this by moving the rejection of unknown radiotap fields
down to after the in-namespace lookup, so it will really use
iterator->_next_ns_data only for vendor namespaces, even in
case undefined fields are present.
Cc: stable@vger.kernel.org
Fixes: 33e5a2f776e3 ("wireless: update radiotap parser")
Reported-by: syzbot+b09c1af8764c0097bb19@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/69944a91.a70a0220.2c38d7.00fc.GAE@google.com
Link: https://patch.msgid.link/20260217120526.162647-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1f87f7d3a3b4 ("cfg80211: add rfkill support")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://patch.msgid.link/20260211082024.1967588-1-d.dulov@aladdin.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The IGTK key ID must be 4 or 5, but the code checks against
key ID + 1, so must check against 5/6 rather than 4/5. Fix
that.
Reported-by: Jouni Malinen <j@w1.fi>
Fixes: 08645126dd24 ("cfg80211: implement wext key handling")
Link: https://patch.msgid.link/20260209181220.362205-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
batadv_v_elp_get_throughput() might be called when the RTNL lock is already
held. This could be problematic when the work queue item is cancelled via
cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case,
an rtnl_lock() would cause a deadlock.
To avoid this, rtnl_trylock() was used in this function to skip the
retrieval of the ethtool information in case the RTNL lock was already
held.
But for cfg80211 interfaces, batadv_get_real_netdev() was called - which
also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must
also be used instead and the lockless version __batadv_get_real_netdev()
has to be called.
Cc: stable@vger.kernel.org
Fixes: 8c8ecc98f5c6 ("batman-adv: Drop unmanaged ELP metric worker")
Reported-by: Christian Schmidbauer <github@grische.xyz>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Sören Skaarup <freifunk_nordm4nn@gmx.de>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
syzbot reported null-ptr-deref of udp_sk(sk)->udp_prod_queue. [0]
Since the cited commit, udp_lib_init_sock() can fail, as can
udp_init_sock() and udpv6_init_sock().
Let's handle the error in udplite_sk_init() and udplitev6_sk_init().
[0]:
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:82 [inline]
BUG: KASAN: null-ptr-deref in atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline]
BUG: KASAN: null-ptr-deref in __udp_enqueue_schedule_skb+0x151/0x1480 net/ipv4/udp.c:1719
Read of size 4 at addr 0000000000000008 by task syz.2.18/2944
CPU: 1 UID: 0 PID: 2944 Comm: syz.2.18 Not tainted syzkaller #0 PREEMPTLAZY
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
kasan_report+0xa2/0xe0 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 mm/kasan/generic.c:200
instrument_atomic_read include/linux/instrumented.h:82 [inline]
atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline]
__udp_enqueue_schedule_skb+0x151/0x1480 net/ipv4/udp.c:1719
__udpv6_queue_rcv_skb net/ipv6/udp.c:795 [inline]
udpv6_queue_rcv_one_skb+0xa2e/0x1ad0 net/ipv6/udp.c:906
udp6_unicast_rcv_skb+0x227/0x380 net/ipv6/udp.c:1064
ip6_protocol_deliver_rcu+0xe17/0x1540 net/ipv6/ip6_input.c:438
ip6_input_finish+0x191/0x350 net/ipv6/ip6_input.c:489
NF_HOOK+0x354/0x3f0 include/linux/netfilter.h:318
ip6_input+0x16c/0x2b0 net/ipv6/ip6_input.c:500
NF_HOOK+0x354/0x3f0 include/linux/netfilter.h:318
__netif_receive_skb_one_core net/core/dev.c:6149 [inline]
__netif_receive_skb+0xd3/0x370 net/core/dev.c:6262
process_backlog+0x4d6/0x1160 net/core/dev.c:6614
__napi_poll+0xae/0x320 net/core/dev.c:7678
napi_poll net/core/dev.c:7741 [inline]
net_rx_action+0x60d/0xdc0 net/core/dev.c:7893
handle_softirqs+0x209/0x8d0 kernel/softirq.c:622
do_softirq+0x52/0x90 kernel/softirq.c:523
</IRQ>
<TASK>
__local_bh_enable_ip+0xe7/0x120 kernel/softirq.c:450
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline]
__dev_queue_xmit+0x109c/0x2dc0 net/core/dev.c:4856
__ip6_finish_output net/ipv6/ip6_output.c:-1 [inline]
ip6_finish_output+0x158/0x4e0 net/ipv6/ip6_output.c:219
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x342/0x580 net/ipv6/ip6_output.c:246
ip6_send_skb+0x1d7/0x3c0 net/ipv6/ip6_output.c:1984
udp_v6_send_skb+0x9a5/0x1770 net/ipv6/udp.c:1442
udp_v6_push_pending_frames+0xa2/0x140 net/ipv6/udp.c:1469
udpv6_sendmsg+0xfe0/0x2830 net/ipv6/udp.c:1759
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xe5/0x270 net/socket.c:742
__sys_sendto+0x3eb/0x580 net/socket.c:2206
__do_sys_sendto net/socket.c:2213 [inline]
__se_sys_sendto net/socket.c:2209 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2209
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd2/0xf20 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f67b4d9c629
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f67b5c98028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f67b5015fa0 RCX: 00007f67b4d9c629
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007f67b4e32b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000040000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f67b5016038 R14: 00007f67b5015fa0 R15: 00007ffe3cb66dd8
</TASK>
Fixes: b650bf0977d3 ("udp: remove busylock and add per NUMA queues")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260219173142.310741-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-02-20
1) Check the value of ipv6_dev_get_saddr() to fix an
uninitialized saddr in xfrm6_get_saddr().
From Jiayuan Chen.
2) Skip the templates check for packet offload in tunnel
mode. Is was already done by the hardware and causes
an unexpected XfrmInTmplMismatch increase.
From Leon Romanovsky.
3) Fix a unregister_netdevice stall due to not dropped
refcounts by always flushing xfrm state and policy
on a NETDEV_UNREGISTER event.
From Tetsuo Handa.
* tag 'ipsec-2026-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: always flush state and policy upon NETDEV_UNREGISTER event
xfrm: skip templates check for packet offload tunnel mode
xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
====================
Link: https://patch.msgid.link/20260220094133.14219-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This issue was discovered during a code audit.
After cancel_work_sync() is called from espintcp_close(),
espintcp_tx_work() can still be scheduled from paths such as
the Delayed ACK handler or ksoftirqd.
As a result, the espintcp_tx_work() worker may dereference a
freed espintcp ctx or sk.
The following is a simple race scenario:
cpu0 cpu1
espintcp_close()
cancel_work_sync(&ctx->work);
espintcp_write_space()
schedule_work(&ctx->work);
To prevent this race condition, cancel_work_sync() is
replaced with disable_work_sync().
Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aZSie7rEdh9Nu0eM@v4bel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
udp_flow_src_port() is indirectly using sk->sk_txhash as a base,
because __tcp_transmit_skb() uses skb_set_hash_from_sk().
This is problematic because this field can change over the
lifetime of a TCP flow, thanks to calls to sk_rethink_txhash().
Problem is that some NIC might (ab)use the PSP UDP source port in their
RSS computation, and PSP packets for a given flow could jump
from one queue to another.
In order to avoid surprises, it is safer to let Protective Load
Balancing (PLB) get its entropy from the IPv6 flowlabel,
and change psp_write_headers() to use sk->sk_hash which
does not change for the duration of the flow.
We might add a sysctl to select the behavior, if there
is a need for it.
Fixes: fc724515741a ("psp: provide encapsulation helper for drivers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-By: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260218141337.999945-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock()
is done too late.
After tcp_v4_syn_recv_sock(), the child socket is already visible
from TCP ehash table and other cpus might use it.
Since newinet->pinet6 is still pointing to the listener ipv6_pinfo
bad things can happen as syzbot found.
Move the problematic code in tcp_v6_mapped_child_init()
and call this new helper from tcp_v4_syn_recv_sock() before
the ehash insertion.
This allows the removal of one tcp_sync_mss(), since
tcp_v4_syn_recv_sock() will call it with the correct
context.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+937b5bbb6a815b3e5d0b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69949275.050a0220.2eeac1.0145.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260217161205.2079883-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
|
|
Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for
packet data") communication with nci nfc chips is not working any more.
The mentioned commit tries to fix access of uninitialized data, but
failed to understand that in some cases the data packet is of variable
length and can therefore not be compared to the maximum packet length
given by the sizeof(struct).
Fixes: 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Reported-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260218083000.301354-1-michael.thalmeier@hale.at
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KMSAN reported an uninit-value access in __inet_bind() when binding
an RDS TCP socket.
The uninitialized memory originates from rds_tcp_conn_alloc(),
which uses kmem_cache_alloc() to allocate the rds_tcp_connection structure.
Specifically, the field 't_client_port_group' is incremented in
rds_tcp_conn_path_connect() without being initialized first:
if (++tc->t_client_port_group >= port_groups)
Since kmem_cache_alloc() does not zero the memory, this field contains
garbage, leading to the KMSAN report.
Fix this by using kmem_cache_zalloc() to ensure the structure is
zero-initialized upon allocation.
Reported-by: syzbot+aae646f09192f72a68dc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=aae646f09192f72a68dc
Tested-by: syzbot+aae646f09192f72a68dc@syzkaller.appspotmail.com
Fixes: a20a6992558f ("net/rds: Encode cp_index in TCP source port")
Signed-off-by: Tabrez Ahmed <tabreztalks@gmail.com>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260217135350.33641-1-tabreztalks@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Save a local pointer to new_sock->sk and hold a reference before
installing callbacks in rds_tcp_accept_one. After
rds_tcp_set_callbacks() or rds_tcp_reset_callbacks(), tc->t_sock is
set to new_sock which may race with the shutdown path. A concurrent
rds_tcp_conn_path_shutdown() may call sock_release(), which sets
new_sock->sk = NULL and may eventually free sk when the refcount
reaches zero.
Subsequent accesses to new_sock->sk->sk_state would dereference NULL,
causing the crash. The fix saves a local sk pointer before callbacks
are installed so that sk_state can be accessed safely even after
new_sock->sk is nulled, and uses sock_hold()/sock_put() to ensure
sk itself remains valid for the duration.
Fixes: 826c1004d4ae ("net/rds: rds_tcp_conn_path_shutdown must not discard messages")
Reported-by: syzbot+96046021045ffe6d7709@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=96046021045ffe6d7709
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260216222643.2391390-1-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*:
1) Add missing __rcu annotations to NAT helper hook pointers in Amanda,
FTP, IRC, SNMP and TFTP helpers. From Sun Jian.
2-4):
- Add global spinlock to serialize nft_counter fetch+reset operations.
- Use atomic64_xchg() for nft_quota reset instead of read+subtract pattern.
Note AI review detects a race in this change but it isn't new. The
'racing' bit only exists to prevent constant stream of 'quota expired'
notifications.
- Revert commit_mutex usage in nf_tables reset path, it caused
circular lock dependency. All from Brian Witte.
5) Fix uninitialized l3num value in nf_conntrack_h323 helper.
6) Fix musl libc compatibility in netfilter_bridge.h UAPI header. This
change isn't nice (UAPI headers should not include libc headers), but
as-is musl builds may fail due to redefinition of struct ethhdr.
7) Fix protocol checksum validation in IPVS for IPv6 with extension headers,
from Julian Anastasov.
8) Fix device reference leak in IPVS when netdev goes down. Also from
Julian.
9) Remove WARN_ON_ONCE when accessing forward path array, this can
trigger with sufficiently long forward paths. From Pablo Neira Ayuso.
10) Fix use-after-free in nf_tables_addchain() error path, from Inseo An.
* tag 'nf-26-02-17' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix use-after-free in nf_tables_addchain()
net: remove WARN_ON_ONCE when accessing forward path array
ipvs: do not keep dest_dst if dev is going down
ipvs: skip ipv6 extension headers for csum checks
include: uapi: netfilter_bridge.h: Cover for musl libc
netfilter: nf_conntrack_h323: don't pass uninitialised l3num value
netfilter: nf_tables: revert commit_mutex usage in reset path
netfilter: nft_quota: use atomic64_xchg for reset
netfilter: nft_counter: serialize reset with spinlock
netfilter: annotate NAT helper hook pointers with __rcu
====================
Link: https://patch.msgid.link/20260217163233.31455-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If net.ipv6.icmp.ratelimit is zero we do not have to call
inet_getpeer_v6() and inet_peer_xrlim_allow().
Both can be very expensive under DDOS.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260216142832.3834174-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If net.ipv4.icmp_ratelimit is zero, we do not have to call
inet_getpeer_v4() and inet_peer_xrlim_allow().
Both can be very expensive under DDOS.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260216142832.3834174-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
