| Age | Commit message (Collapse) | Author |
|
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
This patchset adds new snd_soc_component_regmap_val_bytes(),
and remove component->val_bytes / snd_soc_component_setup_regmap().
Link: https://patch.msgid.link/87a4wdzyxf.wl-kuninori.morimoto.gx@renesas.com
|
|
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
No one is using component->val_bytes. Remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874imlzyv8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
Use snd_soc_component_regmap_val_bytes().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875x71zyw5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
Use snd_soc_component_regmap_val_bytes().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877brhzywd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
component has component->val_bytes which is set via
snd_soc_component_setup_regmap(). But it can be calculated via
component->regmap. No need to keep it as component->val_bytes.
Add snd_soc_component_regmap_val_bytes() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/878qbxzywo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a DMI quirk entry for ASUS HN7306EA in the ACP SoundWire legacy
machine driver.
Set driver_data to ASOC_SDW_ACP_DMIC for this board so the
platform-specific DMIC quirk path is selected.
Signed-off-by: Hasun Park <hasunpark@gmail.com>
Link: https://patch.msgid.link/20260319163321.30326-1-hasunpark@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sof_parse_token_sets() accepts array->size values that can be invalid
for a vendor tuple array header. In particular, a zero size does not
advance the parser state and can lead to non-progress parsing on
malformed topology data.
Validate array->size against the minimum header size and reject values
smaller than sizeof(*array) before parsing. This preserves behavior for
valid topologies and hardens malformed-input handling.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260319-sof-topology-array-size-fix-v1-1-f9191b16b1b7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For avoid null pointer problem if no calibration data exist.
Fixes: 55137f5a68b5e ("ASoC: tas2781: Put three different calibrated data solution into the same data structure")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20260319090747.2090-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
get_alias_quirk() resolves a quirk for an aliased USB ID by scanning
usb_audio_ids[], but it currently checks only the vendor/product pair.
This is weak for quirk table entries that also depend on additional
USB_DEVICE_ID match fields, such as device or interface class,
subclass, protocol, interface number, or bcdDevice range.
Keep the aliased vid:pid as the lookup key, then validate only the
remaining match criteria of each candidate entry against the real
device/interface descriptors by clearing USB_DEVICE_ID_MATCH_DEVICE
from a temporary copy and passing it to usb_match_one_id().
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260318-alsa-usb-fix-quirk-alias-v3-1-bd3b17a32939@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
clang-22 rightfully warns that the memcpy() in adapter_prepare() copies
between different structures, crossing the boundary of nested
structures inside it:
In file included from sound/pci/asihpi/hpimsgx.c:13:
In file included from include/linux/string.h:386:
include/linux/fortify-string.h:569:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
569 | __write_overflow_field(p_size_field, size);
The two structures seem to refer to the same layout, despite the
separate definitions, so the code is in fact correct.
Avoid the warning by copying the two inner structures separately.
I see the same pattern happens in other functions in the same file,
so there is a chance that this may come back in the future, but
this instance is the only one that I saw in practice, hitting it
multiple times per day in randconfig build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260318124016.3488566-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix uninitialized variable playback_only and capture_only because
graph_util_parse_link_direction() may not write them.
Fixes: 1877c3e7937f ("ASoC: imx-card: Add playback_only or capture_only support")
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260318102850.2794029-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The audio-graph-card2 gets the value of 'playback-only' and
'capture_only' property in below sequence, if there is 'playback_only' or
'capture_only' property in port_cpu and port_codec nodes, but no these
properties in ep_cpu and ep_codec nodes, the value of playback_only and
capture_only will be flushed to zero in the end.
graph_util_parse_link_direction(lnk, &playback_only, &capture_only);
graph_util_parse_link_direction(ports_cpu, &playback_only, &capture_only);
graph_util_parse_link_direction(ports_codec, &playback_only, &capture_only);
graph_util_parse_link_direction(port_cpu, &playback_only, &capture_only);
graph_util_parse_link_direction(port_codec, &playback_only, &capture_only);
graph_util_parse_link_direction(ep_cpu, &playback_only, &capture_only);
graph_util_parse_link_direction(ep_codec, &playback_only, &capture_only);
So check the value of is_playback_only and is_capture_only in
graph_util_parse_link_direction() function, if they are true, then rewrite
the values, and no need to check the np variable as
of_property_read_bool() will ignore if it was NULL.
Fixes: 3cc393d2232e ("ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction")
Fixes: 22a507d7680f ("ASoC: simple-card-utils: Check device node before overwrite direction")
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260318102850.2794029-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Copyright for Qualcomm changed its format and replaces the old
Qualcomm Innovative Center by Qualcomm Technology Inc.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Link: https://patch.msgid.link/20260317180943.3062085-1-daniel.lezcano@oss.qualcomm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The build can fail with:
ERROR: modpost: "__auxiliary_driver_register"
[sound/usb/qcom/snd-usb-audio-qmi.ko] undefined!
ERROR: modpost: "auxiliary_driver_unregister"
[sound/usb/qcom/snd-usb-audio-qmi.ko] undefined!
Select AUXILIARY_BUS when SND_USB_AUDIO_QMI is enabled.
Signed-off-by: Frank Zhang <rmxpzlb@gmail.com>
Link: https://patch.msgid.link/20260317102527.556248-1-rmxpzlb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Several of the wm_adsp kunit tests failed by only on arm64. This
turns out to be passing things to release_firmware which were not
allocated with request_firmware. This does actually drop some
errors on other platforms but somehow doesn't cause the tests to
fail, and kunit hides a lot of the output for passing tests.
There is a comment in the code regarding this exact thing in
wm_adsp_fw_find_test_case_exit(), but then it goes on and
does it anyway. I suspect maybe there was a plan to override
wm_adsp_release_firmware_files() that got forgotten, as the
function appears to have hooks for kunit that aren't used. Anyway
for now implement a simple fix of freeing the filenames
locally. It is likely a more detailed fix will be implemented in
the near future but this should get things moving again.
Fixes: bf2d44d07de7 ("ASoC: wm_adsp: Add kunit test for firmware file search")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260318103813.249190-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Focusrite Scarlett 2i2 1st Gen (1235:8006) produces
distorted/silent audio when QUIRK_FLAG_SKIP_IFACE_SETUP is active, as
that flag causes the feedback format to be detected as 17.15 instead
of 16.16.
Add a DEVICE_FLG entry for this device before the Focusrite VENDOR_FLG
entry so that it gets no quirk flags, overriding the vendor-wide
SKIP_IFACE_SETUP. This device doesn't have the internal mixer, Air, or
Safe modes that the quirk was designed to protect.
Fixes: 38c322068a26 ("ALSA: usb-audio: Add QUIRK_FLAG_SKIP_IFACE_SETUP")
Reported-by: pairomaniac [https://github.com/geoffreybennett/linux-fcp/issues/54]
Tested-by: pairomaniac [https://github.com/geoffreybennett/linux-fcp/issues/54]
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/abmsTjKmQMKbhYtK@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260303115720.48783-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Previously, this driver only advertised support for 48 kHz and
96 kHz sample rates, as there was no PLL configuration data
specified for any other sample rate/BCLK.
The CS42L84 is an Apple-specific variant of CS42L42. The PLL
configuration parameters for a variety of common BCLKs are
available in the latter's datasheet. What happens if we just
use those? As it turns out, they work just fine.
Fill out more PLL config parameters in the PLL config lookup
table, and advertise the corresponding sample rates to userspace.
This enables 44.1, 88.2, 176.4 and 192 kHz output and input.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://patch.msgid.link/20260314-cs42l84-rates-v2-1-ea8a5af52542@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a DMI quirk for the Thin A15 B7VF fixing the issue where
the internal microphone was not detected.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220833
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260316080218.2931304-1-zhangheng@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a DMI quirk for the Asus Expertbook BM1403CDA to resolve the issue of the
internal microphone not being detected.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221236
Signed-off-by: Vee Satayamas <vsatayamas@gmail.com>
Reviewed-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260315142511.66029-2-vsatayamas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Similar to commit d8dc8720468a ("ALSA: firewire-lib: fix uninitialized
local variable"), the local variable `curr_cycle_time` in
process_rx_packets() is declared without initialization.
When the tracepoint event is not probed, the variable may appear to be
used without being initialized. In practice the value is only relevant
when the tracepoint is enabled, however initializing it avoids potential
use of an uninitialized value and improves code safety.
Initialize `curr_cycle_time` to zero.
Fixes: fef4e61b0b76 ("ALSA: firewire-lib: extend tracepoints event including CYCLE_TIME of 1394 OHCI")
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Nepomnyashih <sdl@nppct.ru>
Link: https://patch.msgid.link/20260316191824.83249-1-sdl@nppct.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_timer_check_slave() still walks all registered timers and all open
timer instances to find a matching master for a newly opened slave.
Maintain a global list of open master instances that can accept slave
links and use it for the slave lookup path instead. This keeps the
existing matching semantics while avoiding the nested walk over
snd_timer_list and each timer open_list_head.
The reverse path in snd_timer_check_master() already scans only the
pending slave list, so this makes both lookup paths closer in shape
without changing the master/slave linking logic.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260316-alsa-timer-master-list-v1-1-fb95e547110a@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Charles Keepax <ckeepax@opensource.cirrus.com> says:
Normally the SDCA jack detection controls will be named after the GE
widget that represents the grouping of everything in the topology
controlled by the jack selection. However, in the case that the jack
selection only controls a single widget the control will be named after
the SU widget that implements that. It is rather confusing to have the
jack detection controls change naming scheme between devices. Add a new
widget type, similar to mixer widgets, to force use of the control name
rather than falling back to the widget names.
|
|
Most of the time a GE Entity will control many SU Entities and thus the
generated control will use the control name, since the control is
shared. However, in rare cases the GE Entity will only control a single
SU Entity. In this case the control is only linked to a single SU widget
and will thus inherit the name from that. This leads to the naming for
the Selected Mode control to be unpredictable. Update to use the new
named control muxes to always force the use of the control name.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260303155308.138989-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is already a version of the mixer widget that forces use of the
specified control name, rather than factoring in the widget name. Add
the same feature for mux widgets.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260303155308.138989-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The WCD934x audio outputs (earpiece, headphone, speaker) share two power
supply converters, a buck and a flyback, managed by reference counters
(buck_users, flyback_users) in the Class-H controller.
The early return in wcd_clsh_ctrl_set_state() when nstate == ctrl->state
prevented _wcd_clsh_ctrl_set_state() from being called when switching
between outputs sharing the same state value. As a result, the buck and
flyback reference counters were never decremented on disable, leaving the
converters active and their counters out of sync with the actual hardware
state.
This caused audible distortion on the earpiece output and spurious MBHC
over-current protection interrupts on HPHL/HPHR during output switching.
Remove the early return so that CLSH_REQ_ENABLE and CLSH_REQ_DISABLE are
always dispatched, keeping the buck and flyback reference counters
consistent on every state transition.
Signed-off-by: Cédric Bellegarde <cedric.bellegarde@adishatz.org>
Link: https://patch.msgid.link/20260304141006.280894-1-cedric.bellegarde@adishatz.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The file contains a spelling error in a source comment (funciton).
Typos in comments reduce readability and make text searches less reliable
for developers and maintainers.
Replace 'funciton' with 'function' in the affected comment. This is a
comment-only cleanup and does not change behavior.
Fixes: 955ac624058f ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Cc: stable@vger.kernel.org
Signed-off-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Link: https://patch.msgid.link/20260316180545.144032-1-joseph.salisbury@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Bard Liao <yung-chuan.liao@linux.intel.com> says:
The index could change if any endpoint is not present. Remove the index
and let the machine driver get the right codec name from the registered
components.
|
|
The index could change if any endpoint is not present. Remove the index
and let the machine driver get the right codec name from the registered
components.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260316010308.285622-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the index is 0. In theory, it will not change even if any
other endpoint is not present. But to be consistent and avoid surprise,
remove the index and let the machine driver match the codec name
partially.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260316010308.285622-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
__snd_pcm_set_state() writes runtime->state under the PCM stream lock.
However, the OSS I/O functions snd_pcm_oss_write3(), snd_pcm_oss_read3(),
snd_pcm_oss_writev3() and snd_pcm_oss_readv3() read runtime->state
without holding the stream lock, only holding oss.params_lock (a
different mutex that does not synchronize with the stream lock).
Since __snd_pcm_set_state() is called from IRQ context (e.g.,
snd_pcm_period_elapsed -> snd_pcm_update_state -> __snd_pcm_xrun ->
snd_pcm_stop -> snd_pcm_post_stop) while the OSS read/write paths
run in process context, these are concurrent accesses that constitute
a data race.
Rather than using READ_ONCE()/WRITE_ONCE() barriers, introduce a
snd_pcm_get_state() helper that reads runtime->state under the stream
lock, matching the locking discipline used elsewhere in the PCM layer.
Also export snd_pcm_set_state() for completeness.
Use snd_pcm_get_state() in all four OSS I/O functions, caching the
result in a local variable where the same snapshot is used for
multiple comparisons to avoid taking the lock repeatedly.
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260316085047.2876451-1-zzzccc427@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The machine is equipped with ALC294 and requires the
ALC287_FIXUP_TXNW2781_I2C_ASUS quirk for the amplifier to work properly.
Since the machine's PCI SSID is also 1043:1204, HDA_CODEC_QUIRK is
used to retain the previous quirk.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221173
Cc: <stable@vger.kernel.org>
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260316022843.2809968-1-zhangheng@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The initial StarFighter quirk fixed the runtime suspend pop by muting
speakers in the shutup callback before power-down. Further hardware
validation showed that the speaker path is controlled directly by LINE2
EAPD on NID 0x1b together with GPIO2 for the external amplifier.
Replace the shutup-delay workaround with explicit sequencing of those
controls at playback start and stop:
- assert LINE2 EAPD and drive GPIO2 high on PREPARE
- deassert LINE2 EAPD and drive GPIO2 low on CLEANUP
This avoids the runtime suspend pop without a sleep, and also fixes pops
around G3 entry and display-manager start that the original workaround
did not cover.
Fixes: 1cb3c20688fc ("ALSA: hda/realtek: Fix speaker pop on Star Labs StarFighter")
Tested-by: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://patch.msgid.link/20260315201127.33744-1-sean@starlabs.systems
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
Because old pcm_new()/pcm_free() didn't care about parameter component,
to avoid name collisions, we have added pcm_construct()/pcm_destruct() by
commit c64bfc9066007 ("ASoC: soc-core: add new pcm_construct/pcm_destruct")
Because all driver switch to new pcm_construct()/pcm_destruct(), old
pcm_new()/pcm_free() were remoted by commit e9067bb502787 ("ASoC:
soc-component: remove snd_pcm_ops from component driver")
But naming of pcm_construct()/pcm_destruct() are not goot. re-add
pcm_new()/pcm_free(), and switch to use it, again.
Because it has no functional significance, 1 patch is for 1 vender.
|
|
All driver have switched to use pcm_new()/pcm_free(), let's remove
pcm_construct()/pcm_destruct().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875x6wjyoa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/877brcjyoh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/878qbsjyon.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a4w8jyot.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87bjgojyoy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cy14jyp4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87eclkjyp9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87fr60jypf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h5qgjypk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ikawjypq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jyvcjypw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldfsjyq1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ms08jyq8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6kojyqf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87pl54jyqm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb50278 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87qzpkjyqt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|