summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2026-02-25ALSA: usb-audio: Cap the packet size pre-calculationsTakashi Iwai
We calculate the possible packet sizes beforehand for adaptive and synchronous endpoints, but we didn't take care of the max frame size for those pre-calculated values. When a device or a bus limits the packet size, a high sample rate or a high number of channels may lead to the packet sizes that are larger than the given limit, which results in an error from the USB core at submitting URBs. As a simple workaround, just add the sanity checks of pre-calculated packet sizes to have the upper boundary of ep->maxframesize. Fixes: f0bd62b64016 ("ALSA: usb-audio: Improve frames size computation") Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076 Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20260225085233.316306-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-02-24ASoC: SDCA: Add CS47L47 to class driverRichard Fitzgerald
Add the SoundWire ID for CS47L47 to the class driver. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20260223150256.326143-4-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-24ASoC: soc_sdw_utils: Add device info for CS47L47Richard Fitzgerald
Add a device info entry for the Cirrus Logic CS47L47. CS47L47 has UAJ (headset speaker + mic + jack detect) and DMICs. The audio ports are similar to the CS42L45 so can be based on the CS42L45 code. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20260223150256.326143-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-23ASoC: Add DMIC support for the AMD RPL platformMark Brown
Merge series from Mingyou Chen <qby140326@gmail.com>: Add DMIC support for the AMD RPL platforma.
2026-02-23ASoC: tas2552: Allow audio enable GPIO to sleepMarek Vasut
The audio enable GPIO is not toggled in any critical section where it could not sleep, allow the audio enable GPIO to sleep. This allows the driver to operate the audio enable GPIO connected to I2C GPIO expander. Signed-off-by: Marek Vasut <marex@nabladev.com> Link: https://patch.msgid.link/20260220202332.241035-1-marex@nabladev.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-23ASoC: amd: yc: Add ASUS EXPERTBOOK BM1503CDA to quirk tableAzamat Almazbek uulu
The ASUS ExpertBook BM1503CDA (Ryzen 5 7535U, Barcelo-R) has an internal DMIC connected through the AMD ACP (Audio CoProcessor) but is missing from the DMI quirk table, so the acp6x machine driver probe returns -ENODEV and no DMIC capture device is created. Add the DMI entry so the internal microphone works out of the box. Signed-off-by: Azamat Almazbek uulu <almazbek1608@gmail.com> Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://patch.msgid.link/20260221114813.5610-1-almazbek1608@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-23 ASoC rt5677: Prepare to support Lenovo Yoga Book tabletsMark Brown
Merge series from Yauhen Kharuzhy <jekhor@gmail.com>: There are two Intel Cherry Trail-based devices using the RT5677 as a sound codec: Lenovo Yoga Book YB1-X90 (Android tablet) and YB1-X91 (Windows tablet). They both have the same hardware configuration, but the X90 doesn't have correct ACPI table definitions for many peripherals, whereas the X91 does. Devices missing in the ACPI are defined in the board-specific driver platform/x86/x86-android-tablets. In the X91 tablet, an ACPI _CRS method for the RT5677 contains GPIO configuration entries which were not supported by the codec driver before. To support such device definitions, some modifications are added to the RT5677 code: ACPI, SPI, and I2C matching ids have been introduced, as well as some GPIO-related magic.
2026-02-23Bitmask logic fix and firmware-name support forMark Brown
Merge series from Luca Weiss <luca.weiss@fairphone.com>: First a patch which fixes a logic error in the aw88261 driver. And then we add "firmware-name" support for that driver to support loading the device-specific firmware properly.
2026-02-23ASoC: cs42l43: Report insert for exotic peripheralsCharles Keepax
For some exotic peripherals the type detect can return a reserved value of 0x4. This will currently return an error and not report anything to user-space, update this to report the insert normally. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20260223093616.3800350-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-23ALSA: usb-audio: Skip clock selector for Focusrite devicesGeoffrey D. Bennett
Add QUIRK_FLAG_SKIP_CLOCK_SELECTOR for Focusrite devices. During interface parsing, snd_usb_clock_find_source() reads the clock selector value then writes it back unchanged. On Focusrite devices this redundant write results in a ~300ms delay per altsetting, adding ~1.8s to probe time on a typical device with 6 altsettings. Enabling SKIP_CLOCK_SELECTOR skips the redundant write-back. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/00e53ae0a508b41516b41833daa17823381a649c.1771594828.git.g@b4.vu
2026-02-23ALSA: usb-audio: Add QUIRK_FLAG_SKIP_IFACE_SETUPGeoffrey D. Bennett
Add a quirk flag to skip the usb_set_interface(), snd_usb_init_pitch(), and snd_usb_init_sample_rate() calls in __snd_usb_parse_audio_interface(). These are redundant with snd_usb_endpoint_prepare() at stream-open time. Enable the quirk for Focusrite devices, as init_sample_rate(rate_max) sets 192kHz during probing, which disables the internal mixer and Air and Safe modes. Fixes: 16f1f838442d ("Revert "ALSA: usb-audio: Drop superfluous interface setup at parsing"") Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/65a7909b15f9feb76c2a6f4f8814c240ddc50737.1771594828.git.g@b4.vu
2026-02-23ALSA: usb-audio: Remove VALIDATE_RATES quirk for Focusrite devicesGeoffrey D. Bennett
Remove QUIRK_FLAG_VALIDATE_RATES for Focusrite. With the previous commit, focusrite_valid_sample_rate() produces correct rate tables without USB probing. QUIRK_FLAG_VALIDATE_RATES sends SET_CUR requests for each rate (~25ms each) and leaves the device at 192kHz. This is a problem because that rate: 1) disables the internal mixer, so outputs are silent until an application opens the PCM and sets a lower rate, and 2) the Air and Safe modes get disabled. Fixes: 5963e5262180 ("ALSA: usb-audio: Enable rate validation for Scarlett devices") Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/09b9c012024c998c4ca14bd876ef0dce0d0b6101.1771594828.git.g@b4.vu
2026-02-23ALSA: usb-audio: Improve Focusrite sample rate filteringGeoffrey D. Bennett
Replace the bLength == 10 max_rate check in focusrite_valid_sample_rate() with filtering that also examines the bmControls VAL_ALT_SETTINGS bit. When VAL_ALT_SETTINGS is readable, the device uses strict per-altsetting rate filtering (only the highest rate pair for that altsetting is valid). When it is not readable, all rates up to max_rate are valid. For devices without the bLength == 10 Format Type descriptor extension but with VAL_ALT_SETTINGS readable and multiple altsettings (only seen in Scarlett 18i8 3rd Gen playback), fall back to the Focusrite convention: alt 1 = 48kHz, alt 2 = 96kHz, alt 3 = 192kHz. This produces correct rate tables for all tested Focusrite devices (all Scarlett 2nd, 3rd, and 4th Gen, Clarett+, and Vocaster) using only USB descriptors, allowing QUIRK_FLAG_VALIDATE_RATES to be removed for Focusrite in the next commit. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/7e18c1f393a6ecb6fc75dd867a2c4dbe135e3e22.1771594828.git.g@b4.vu
2026-02-23ALSA: hda/realtek: add quirk for Samsung Galaxy Book Flex (NT950QCT-A38A)Juhyung Park
Similar to other Samsung laptops, NT950QCT also requires the ALC298_FIXUP_SAMSUNG_AMP quirk applied. Cc: <stable@vger.kernel.org> Signed-off-by: Juhyung Park <qkrwngud825@gmail.com> Link: https://patch.msgid.link/20260222122609.281191-2-qkrwngud825@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-02-23ALSA: hda/realtek: fix model name typo for Samsung Galaxy Book Flex ↵Juhyung Park
(NT950QCG-X716) There's no product named "Samsung Galaxy Flex Book". Use the correct "Samsung Galaxy Book Flex" name. Link: https://www.samsung.com/sec/support/model/NT950QCG-X716 Link: https://www.samsung.com/us/computing/galaxy-books/galaxy-book-flex/galaxy-book-flex-15-6-qled-512gb-storage-s-pen-included-np950qcg-k01us Cc: <stable@vger.kernel.org> Signed-off-by: Juhyung Park <qkrwngud825@gmail.com> Link: https://patch.msgid.link/20260222122609.281191-1-qkrwngud825@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-02-23ALSA: hda/realtek: Add quirk for Acer Aspire V3-572GPanagiotis Foliadis
The Acer Aspire V3-572G has a combo jack (ALC283) but the BIOS sets pin 0x19 to 0x411111f0 (not connected), so the headset mic is not detected. Add a quirk to override pin 0x19 as a headset mic and enable headset mode. Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221075 Suggested-by: Charalampos Mitrodimas <charmitro@posteo.net> Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net> Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net> Link: https://patch.msgid.link/20260221-fix-detect-mic-v1-1-b6e427b5275d@posteo.net Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-02-23ALSA: scarlett2: Fix DSP filter control array handlingGeoffrey D. Bennett
scarlett2_add_dsp_ctls() was incorrectly storing the precomp and PEQ filter coefficient control pointers into the precomp_flt_switch_ctls and peq_flt_switch_ctls arrays instead of the intended targets precomp_flt_ctls and peq_flt_ctls. Pass NULL instead, as the filter coefficient control pointers are not used, and remove the unused precomp_flt_ctls and peq_flt_ctls arrays from struct scarlett2_data. Additionally, scarlett2_update_filter_values() was reading dsp_input_count * peq_flt_count values for SCARLETT2_CONFIG_PEQ_FLT_SWITCH, but the peq_flt_switch array is indexed only by dsp_input_count (one switch per DSP input, not per filter). Fix the read count. Fixes: b64678eb4e70 ("ALSA: scarlett2: Add DSP controls") Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://patch.msgid.link/86497b71db060677d97c38a6ce5f89bb3b25361b.1771581197.git.g@b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-02-23ALSA: hda/realtek: Fix speaker pop on Star Labs StarFighterSean Rhodes
On Star Labs StarFighter (Realtek ALC233/235), the internal speakers can emit an audible pop when entering or leaving runtime suspend. Mute the speaker output paths via snd_hda_gen_shutup_speakers() in the Realtek shutup callback before the codec is powered down. This is enough to avoid the pop without special EAPD handling. Test results: - runtime PM pop fixed - still reaches D3 (PCI 0000:00:1f.3 power_state=D3hot) - does not address pops on cold boot (G3 exit) or around display manager start/shutdown journalctl -k (boot): - snd_hda_codec_alc269 hdaudioC0D0: ALC233: picked fixup for PCI SSID 7017:2014 - snd_hda_codec_alc269 hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker Suggested-by: Takashi Iwai <tiwai@suse.com> Tested-by: Sean Rhodes <sean@starlabs.systems> Signed-off-by: Sean Rhodes <sean@starlabs.systems> Link: https://patch.msgid.link/4d5fb71b132bb283fd41c622b8413770b2065242.1771532060.git.sean@starlabs.systems Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-02-22ASoC: simple-card-utils: add sysclk ordering supportStefano Radaelli
When simple-audio-card programs sysclk for CPU and codec DAIs during hw_params, the ordering of these calls may matter on some platforms. Some CPU DAIs finalize or adjust the MCLK rate as part of their set_sysclk() callback (for example by calling clk_set_rate()). If the codec sysclk is configured before the CPU DAI applies the final MCLK rate, the codec may configure its internal clocking based on a non-final MCLK value. Such situations can arise depending on the clock provider/consumer relationship between the CPU DAI and the codec. Introduce an explicit sysclk ordering enum in simple-card-utils and use it to control the order of snd_soc_dai_set_sysclk() calls in the mclk-fs handling path. The default behaviour remains unchanged (codec-first) to avoid regressions. Signed-off-by: Stefano Radaelli <stefano.r@variscite.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/20260213150355.442609-1-stefano.r@variscite.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: ti: davinci-mcasp: Add system suspend/resume supportSen Wang
The McASP driver supports runtime PM callbacks for register save/restore during device idle, but doesn't provide system suspend/resume callbacks. This causes audio to fail to resume after system suspend. Since the driver already handles runtime suspend & resume, we can reuse existing runtime PM logics. Signed-off-by: Sen Wang <sen@ti.com> Link: https://patch.msgid.link/20260211221001.155843-1-sen@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: soc-compress: use function to clear symmetric paramsKuninori Morimoto
Current soc-compress.c clears symmetric_rate, but it clears rate only, not clear other symmetric_channels/sample_bits. static int soc_compr_clean(...) { ... if (!snd_soc_dai_active(cpu_dai)) => cpu_dai->symmetric_rate = 0; if (!snd_soc_dai_active(codec_dai)) => codec_dai->symmetric_rate = 0; ... }; This feature was added when v3.7 kernel [1], and there was only symmetric_rate, no symmetric_channels/sample_bits in that timing. symmetric_channels/sample_bits were added in v3.14 [2], but I guess it didn't notice that soc-compress.c is updating symmetric_xxx. We are clearing symmetry_xxx by soc_pcm_set_dai_params(), but is soc-pcm.c local function. Makes it global function and clear symmetry_xxx by it. [1] commit 1245b7005de02 ("ASoC: add compress stream support") [2] commit 3635bf09a89cf ("ASoC: soc-pcm: add symmetry for channels and sample bits") Fixes: 3635bf09a89c ("ASoC: soc-pcm: add symmetry for channels and sample bits") Cc: Nicolin Chen <b42378@freescale.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/87ms15e3kv.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: Add SPDX ids to many soc filesTim Bird
Add appropriate SPDX-License-Identifier lines to the the remaining files that are missing such lines in the sound/soc directory, and in a few other miscelaneous files. Remove boilerplate license text. Signed-off-by: Tim Bird <tim.bird@sony.com> Link: https://patch.msgid.link/20260217190837.165504-1-tim.bird@sony.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: rt5575: Remove redundant assignment to .ownerPei Xiao
The coccicheck tool reports the following warning for this driver: ./rt5575.c:342:3-8: No need to set .owner here. The core will do it. The manual assignment of .owner = THIS_MODULE; in the rt5575_i2c_driver struct is redundant. The i2c_add_driver() function, which is called to register the driver, automatically sets the driver's owner to THIS_MODULE. The driver core handles this assignment internally, making the explicit initialization in the struct definition unnecessary. Remove the unnecessary line. Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn> Link: https://patch.msgid.link/tencent_D7DDB8B646B471AF50B541DA7AC99FBCCD0A@qq.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: rt5677-spi: Add SPI device ID matching tableYauhen Kharuzhy
To allow defining a device in board-specific drivers, add 'rt5677' as a supported SPI device ID. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Link: https://patch.msgid.link/20260211002255.4090440-8-jekhor@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: rt5677: Reset the codec during probingYauhen Kharuzhy
To ensure that the codec is in a known state, reset it during driver initialization. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Link: https://patch.msgid.link/20260211002255.4090440-7-jekhor@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: rt5677: Set up ACPI GPIO pins mapping tableYauhen Kharuzhy
To get GPIO configuration from ACPI, define an ACPI GPIO mapping table, linking GPIO names with CRS entries. The only known device that has an ACPI entry for the RT5677 codec is the Lenovo Yoga Book YB1-X91, and it uses this entry to describe the entire sound system configuration: codec connections and jack detection chip connections. This ACPI definition looks YogaBook-specific, but codec GPIOs may be recognized as generic, so add this lookup table for all devices. Details about the YogaBook RT5677 ACPI entry are provided below. CRS resources: I2C devices: 0: rt5677 codec 1: ts3a227e jack detection IC GPIOs: 0: rt5677 codec reset 1: rt5677 codec pow-ldo2 2: speaker enable INTs: 0: rt5677 codec 1: ts3a227e jack detection IC SPI device: 0: rt5677 codec SPI connection ACPI decompiled dump fragment: Device (RTEK) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "10EC5677") // _HID: Hardware ID Name (_CID, "10EC5677") // _CID: Compatible ID Name (_DDN, "Realtek IIS Audio Codec") // _DDN: DOS Device Name Name (_SUB, "17AA7005") // _SUB: Subsystem ID Name (_UID, One) // _UID: Unique ID Name (_PR0, Package (0x01) // _PR0: Power Resources for D0 { CLK3 }) Name (CHAN, Package (0x02) { One, 0x0124F800 }) Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { I2cSerialBusV2 (0x002C, ControllerInitiated, 0x000186A0, AddressingMode7Bit, "\\_SB.PCI0.I2C1", 0x00, ResourceConsumer, , Exclusive, ) I2cSerialBusV2 (0x003B, ControllerInitiated, 0x000186A0, AddressingMode7Bit, "\\_SB.PCI0.I2C1", 0x00, ResourceConsumer, , Exclusive, ) GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO3", 0x00, ResourceConsumer, , ) { // Pin list 0x0019 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO3", 0x00, ResourceConsumer, , ) { // Pin list 0x0012 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO3", 0x00, ResourceConsumer, , ) { // Pin list 0x0030 } GpioInt (Edge, ActiveLow, Exclusive, PullNone, 0x0000, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x005B } GpioInt (Edge, ActiveLow, Exclusive, PullNone, 0x0000, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004D } SpiSerialBusV2 (0x0001, PolarityLow, FourWireMode, 0x08, ControllerInitiated, 0x003D0900, ClockPolarityHigh, ClockPhaseSecond, "\\_SB.PCI0.SPI1", 0x00, ResourceConsumer, , Exclusive, ) }) Return (SBUF) /* \_SB_.PCI0.I2C1.RTEK._CRS.SBUF */ } } Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Link: https://patch.msgid.link/20260211002255.4090440-6-jekhor@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: rt5677: Report error if the ID register cannot be readYauhen Kharuzhy
To make error messages clearer, report if the ID register failed to be read via I2C during probing. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Link: https://patch.msgid.link/20260211002255.4090440-5-jekhor@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: rt5677: Fix typo in the header fileYauhen Kharuzhy
Fix a typo in the DAC1 Digital Volume register description comment (it was mistakenly named as DAC3). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Link: https://patch.msgid.link/20260211002255.4090440-4-jekhor@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: rt5677: Allow it to be defined as an I2C boardYauhen Kharuzhy
Some devices (e.g., Lenovo Yoga Book YB1-X90) define the codec as i2c_board, so add an I2C ID table to support this. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Link: https://patch.msgid.link/20260211002255.4090440-3-jekhor@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: rt5677: Add 10EC5677 ACPI ID as supportedYauhen Kharuzhy
Add 10EC5677 ACPI ID to the match table. It is used in the Lenovo Yoga Book YB1-X91 tablet at least. Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> Link: https://patch.msgid.link/20260211002255.4090440-2-jekhor@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: codecs: aw88261: Add firmware-name supportLuca Weiss
Since the aw88261_acf.bin file appears to be device-specific, add firmware-name support so that devicetree users can point to a device-specific path to not conflict with other devices that might also ship a aw88261_acf.bin. Read the "firmware-name" property if available, and otherwise fall back to the generic name. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://patch.msgid.link/20260211-aw88261-fwname-v1-3-e24e833a019d@fairphone.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: Add quirk for Lecoo Bellator N176Mingyou Chen
The Lecoo Bellator N176 requires a specific quirk to enable the DMIC support. Signed-off-by: Mingyou Chen <qby140326@gmail.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/20260213055904.110256-4-qby140326@gmail.com Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: Drop RPL driverMingyou Chen
The RPL driver is no longer needed because its functionality has been superseded by the YC driver Signed-off-by: Mingyou Chen <qby140326@gmail.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/20260213055904.110256-3-qby140326@gmail.com Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22ASoC: Add DMIC support for the AMD RPL platformMingyou Chen
Add RPL rev 0x62 check and reserve ACP CONFIG PIN 10 to 14 for RPL platform Signed-off-by: Mingyou Chen <qby140326@gmail.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Link: https://patch.msgid.link/20260213055904.110256-2-qby140326@gmail.com Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-22Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL usesKees Cook
Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert more 'alloc_obj' cases to default GFP_KERNEL argumentsLinus Torvalds
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert 'alloc_flex' family to use the new default GFP_KERNEL argumentLinus Torvalds
This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21Convert 'alloc_obj' family to use the new default GFP_KERNEL argumentLinus Torvalds
This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21treewide: Replace kmalloc with kmalloc_obj for non-scalar typesKees Cook
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-20Merge tag 'sound-fix-7.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a bunch of updates, but there should be no big surprises; mostly device-specific quirks and fix-ups or non-code changes: - Quirks for ASoC AMD, HD-audio and USB-audio - Fixes in ASoC fsl, rockchip, renesas, aw codecs - Fixes for USB-audio packet handling in the implicit feedback mode - Updates of SPDX license IDs in some files" * tag 'sound-fix-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits) ASoC: rockchip: i2s-tdm: Use param rate if not provided by set_sysclk ALSA: hda/hdmi: Add quirk for TUXEDO IBS14G6 ASoC: dt-bindings: asahi-kasei,ak5558: Fix the supply names ASoC: dt-bindings: asahi-kasei,ak4458: Fix the supply names ASoC: dt-bindings: asahi-kasei,ak4458: set unevaluatedProperties:false ASoC: amd: amd_sdw: add machine driver quirk for Lenovo models ASoC: amd: acp: Add ACP7.0 match entries for Realtek parts ALSA: echoaudio: Add SPDX ids to some files ALSA: isa: Add SPDX id lines to some files ALSA: core: Add SPDX license id to files ASoC: tas2783A: add explicit port prepare handling ASoC: renesas: rz-ssi: Fix playback and capture ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14 UX3405MA ALSA: hda/conexant: Fix headphone jack handling on Acer Swift SF314 ASoC: qcom: sm8250: Add quinary MI2S support ASoC: amd: yc: Add DMI quirk for ASUS Vivobook Pro 15X M6501RR ALSA: usb-audio: Avoid potentially repeated XRUN error messages ALSA: usb-audio: Add sanity check for OOB writes at silencing ALSA: usb-audio: Optimize the copy of packet sizes for implicit fb handling ALSA: usb-audio: Update the number of packets properly at receiving ...
2026-02-19Merge tag 'asoc-fix-v7.0-rockchip-i2s-tdm' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Additional Rockchip fix for v7.0 One more ASoC fix, for a regression with the Rockchip I2S TDM support on a number of platforms.
2026-02-19ASoC: rockchip: i2s-tdm: Use param rate if not provided by set_sysclkDetlev Casanova
Drivers will not always call set_sysclk() for all clocks, especially when default mclk-fs can be used. When that is the case, use the clock rate set in the params multiplied by the default mclk-fs. Fixes: 5323186e2e8d ("ASoC: rockchip: i2s_tdm: Re-add the set_sysclk callback") Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://patch.msgid.link/20260218201834.924358-1-detlev.casanova@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-19Merge tag 'asoc-fix-v7.0-merge-window' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v7.0 merge window A reasonably small set of fixes and quriks that came in during the merge window, there's one more pending that I'll send tomorrow if you didn't send a PR already.
2026-02-19ALSA: hda/hdmi: Add quirk for TUXEDO IBS14G6Aaron Erhardt
Depending on the timing during boot, the BIOS might report wrong pin capabilities, which can lead to HDMI audio being disabled. Therefore, force HDMI audio connection on TUXEDO InfinityBook S 14 Gen6. Signed-off-by: Aaron Erhardt <aer@tuxedocomputers.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://patch.msgid.link/20260218213234.429686-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-02-18ASoC: amd: amd_sdw: add machine driver quirk for Lenovo modelsVijendar Mukunda
This patch adds a quirk to include the codec amplifier function for Lenovo models listed in the quirk table. Note: In these models, the RT722 codec amplifier is excluded, and an external amplifier is used instead. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://patch.msgid.link/20260218104734.3641481-3-Vijendar.Mukunda@amd.com Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-18ASoC: amd: acp: Add ACP7.0 match entries for Realtek partsVijendar Mukunda
This patch adds below machine configuration for the ACP7.0 & ACP7.1 platforms. Link 0: RT1320 amplifier Link 1: RT722 codec with three endpoints: Headset, Speaker, and DMIC. Note: The Speaker endpoint on the RT722 codec is not used. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://patch.msgid.link/20260218104734.3641481-2-Vijendar.Mukunda@amd.com Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2026-02-18ALSA: echoaudio: Add SPDX ids to some filesTim Bird
Add SPDX-License-Identifier lines to some files in the sound subsystem - mostly in the echoaudio drivers. Remove boilerplate GPL headers. Signed-off-by: Tim Bird <tim.bird@sony.com> Link: https://patch.msgid.link/20260212234928.3739815-1-tim.bird@sony.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-02-18ALSA: isa: Add SPDX id lines to some filesTim Bird
Add SPDX-License-Identifier lines to several files where they are missing, mostly in the sound/isa subdir. Use GPL-2.0 as the id. [ note: the same change applied to sound/hda/core/trace.c, too -- tiwai ] Signed-off-by: Tim Bird <tim.bird@sony.com> Link: https://patch.msgid.link/20260212195905.3726149-1-tim.bird@sony.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-02-18ALSA: core: Add SPDX license id to filesTim Bird
Add an SPDX id of LGPL-2.0+ to files in the sound core sub-system that are missing ids. Remove boilerplate text. These files were originally submitted in a big commit for the ALSA sound system for kernel version 2.5.4, by Jaroslav Kysela, in Feb 2002. Signed-off-by: Tim Bird <tim.bird@sony.com> Link: https://patch.msgid.link/20260212183103.3720788-1-tim.bird@sony.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2026-02-17Merge tag 'soundwire-7.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - support for Qualcomm v2.2.0 controllers - bus method updates for .probe(), .remove() and .shutdown() and remove function return value updates - Avell B.ON dmi-quirks mapping - mark cs42l45 codec as wake capable * tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: intel_ace2x: add SND_HDA_CORE dependency dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible soundwire: Use bus methods for .probe(), .remove() and .shutdown() soundwire: Make remove function return no value soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15) soundwire: qcom: Use guard to avoid mixing cleanup and goto soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-18 14:19:46 +0000