| Age | Commit message (Collapse) | Author |
|---|
|
strcpy() is deprecated; use the safer strscpy() instead.
Link: https://github.com/KSPP/linux/issues/88
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251112202630.6277-1-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In boards like adl_lt6911_hdmi_ssp/mtl_lt6911_hdmi_ssp/rpl_lt6911_hdmi_ssp,
HDMI is supported both for playback via normal HDA display codec,
as well as PCM capture from HDMI-In over I2S.
The common board driver function hda_dsp_hdmi_pcm_handle() has an
invalid assumption that "HDMI" is only used to identify playback HDMI
PCMs on the card. This will result in failures if HDMI-In PCMs are
defined in topology using the string "HDMI", and they are registered
before the playback PCMs.
Fix the issue by explicitly looking for FE playback PCMs.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251112115045.337062-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_gf1_synth_init() and snd_gf1_synth_done() were declared but never
implenmented and used since the beginning of kernel git history.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20251112092007.3546539-1-yuehaibing@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The project hardware ID should be ALC287_FIXUP_TXNW2781_I2C,
not ALC287_FIXUP_TAS2781_I2C for HP Lampass projects.
Fixes: 7a39c723b747 ("ALSA: hda/tas2781: Add new quirk for HP new projects")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251112092609.15865-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These two patches add ALSA controls to support restoring factory calibration
during OS boot on ChromeOS.
ChromeOS applies calibration during boot using a process that has restricted
access permissions. This process needs ALSA controls for all settings that
it must restore.
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Add supports for new audio configurations on Intel platforms.
|
|
In snd_usb_create_streams(), for UAC version 3 devices, the Interface
Association Descriptor (IAD) is retrieved via usb_ifnum_to_if(). If this
call fails, a fallback routine attempts to obtain the IAD from the next
interface and sets a BADD profile. However, snd_usb_mixer_controls_badd()
assumes that the IAD retrieved from usb_ifnum_to_if() is always valid,
without performing a NULL check. This can lead to a NULL pointer
dereference when usb_ifnum_to_if() fails to find the interface descriptor.
This patch adds a NULL pointer check after calling usb_ifnum_to_if() in
snd_usb_mixer_controls_badd() to prevent the dereference.
This issue was discovered by syzkaller, which triggered the bug by sending
a crafted USB device descriptor.
Fixes: 17156f23e93c ("ALSA: usb: add UAC3 BADD profiles support")
Signed-off-by: Haein Lee <lhi0729@kaist.ac.kr>
Link: https://patch.msgid.link/vwhzmoba9j2f.vwhzmob9u9e2.g6@dooray.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add an ALSA control (CAL_DATA) that can be used to restore amp calibration,
instead of using debugfs. A readback control (CAL_DATA_RB) is also added
for factory testing.
On ChromeOS the process that restores amp calibration from NVRAM has
limited permissions and cannot access debugfs. It requires an ALSA control
that it can write the calibration blob into. ChromeOS also restricts access
to ALSA controls, which avoids the risk of accidental or malicious
overwriting of good calibration data with bad data. As this control is not
needed for normal Linux-based distros it is a Kconfig option.
A separate control, CAL_DATA_RB, provides a readback of the current
calibration data, which could be either from a write to CAL_DATA or the
result of factory production-line calibration.
The write and read are intentionally separate controls to defeat "dumb"
save-and-restore tools like alsa-restore that assume it is safe to save
all control values and write them back in any order at some undefined
future time. Such behavior carries the risk of restoring stale or bad data
over the top of good data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251111130850.513969-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Create an ALSA control to read the value of the firmware
CAL_SET_STATUS control. This reports whether the firmware is
using a calibration blob or the default calibration from the
.bin file.
The firmware only reports a valid value in this register while
audio is actually playing and the internal PLL is locked to the
audio clock. Otherwise it returns a status of "unknown".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251111130850.513969-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds Cirrus codec internal speaker configuration
to support the cs42l43_l3_cs35l56_l2 machine.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251111123737.246626-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds the aggregated mode support:
cs42l43 codec with left and right tweeters on soundwire link 3,
cs35l56 left and right woofers on soundwire link 2.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251111123737.246626-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The bt_link_mask value is from NHLT. The BT dai link should be created
if bt_link_mask is set. Besides, hda_machine_select() will look for the
topology with BT BE.
Suggested-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251111123737.246626-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Avell B.ON is an OEM re-branded NUC15 'Bishop County' LAPBC510 and
LAPBC710.
Link: https://github.com/thesofproject/linux/issues/5529
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251111123737.246626-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This SKU does not use the RT722 internal speaker. Add
SOC_SDW_CODEC_SPKR to prevent DAI being created via
codec_info_list.dais.quirk_exclude.
Other SKUs continue to check higher-priority sdca_functions
when the BIOS SDCA property is present.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251111123737.246626-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support for the RT722 codec on SoundWire link 0,
and RT1320 left and right amplifiers on links 2 and 3, respectively.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251111123737.246626-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
adding quirk override support to configure different quirk configuration
at runtime.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251111103512.244147-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
"struct sdca_control" declares "values" field as integer array.
But the memory allocated to it is of char array. This causes
crash for sdca_parse_function API. This patch addresses the
issue by allocating correct data size.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251110152646.192-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adjust the error codes returned by the calibration debugfs files
to provide a wider range of errors and make them more consistent.
There is a limited number of standard errors and it's not always
easy to find an error code that accurately describes what happened.
Additionally, user code often uses strerror() or something similar
to report a generic error description. The original calibration
code used a limited set of errors to attempt to avoid user error
strings that would be confusing or unclear on a file read/write.
However, this restricts the ability to provide informative errors.
This limited error range didn't help very much with debugging so
it has been expanded, rather than worrying about what strerror()
would return.
The errors are now more consistent:
ENXIO Calibration is not supported by the driver.
EOPNOTSUPP The given calibration command is not supported.
EBUSY Cannot calibrate because the amp is playing audio.
ERANGE Calibration result was out-of-range.
ETIMEDOUT Calibration did not complete.
EMSGSIZE Blob written to cal_data is the wrong size.
ENODATA No calibration data available to read from cal_data,
or
Blob written to cal_data does not contain calibration,
or
No calibration data available to save to UEFI.
EIO General failure to communicate with the firmware, mainly
indicating that firmware controls are missing.
EINVAL Has its normal meaning that an invalid argument was passed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251110114327.84370-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The PCM stream data in USB-audio driver is transferred over USB URB
packet buffers, and each packet size is determined dynamically. The
packet sizes are limited by some factors such as wMaxPacketSize USB
descriptor. OTOH, in the current code, the actually used packet sizes
are determined only by the rate and the PPS, which may be bigger than
the size limit above. This results in a buffer overflow, as reported
by syzbot.
Basically when the limit is smaller than the calculated packet size,
it implies that something is wrong, most likely a weird USB
descriptor. So the best option would be just to return an error at
the parameter setup time before doing any further operations.
This patch introduces such a sanity check, and returns -EINVAL when
the packet size is greater than maxpacksize. The comparison with
ep->packsize[1] alone should suffice since it's always equal or
greater than ep->packsize[0].
Reported-by: syzbot+bfd77469c8966de076f7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bfd77469c8966de076f7
Link: https://lore.kernel.org/690b6b46.050a0220.3d0d33.0054.GAE@google.com
Cc: Lizhi Xu <lizhi.xu@windriver.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251109091211.12739-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add new vendor_id and subsystem_id in quirk for HP new projects.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251108142325.2563-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In file included from ../sound/pci/au88x0/au8830.c:15:
In function ‘vortex_Eqlzr_SetAllBandsFromActiveCoeffSet’,
../sound/pci/au88x0/au88x0_eq.c:571:9: error: ‘vortex_EqHw_SetRightGainsTarget’ reading 2 bytes from a region of size 0 [-Werror=stringop-overread]
vortex_EqHw_SetRightGainsTarget(vortex, &(eq->this130[eq->this10]));
Modified the array access in vortex_Eqlzr_SetAllBandsFromActiveCoeffSet() to use pointer arithmetic instead of array indexing.
This resolves a compiler warning that incorrectly flagged a buffer overread when accessing the EQ gain array.
The this130 array has fixed size 20 and the index is safely within bounds, making the original code correct but confusing to static analysis.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20251107024525.38454-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Replace hardcoded GPIO node value with a defined constant for better
code readability and maintainability.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20251107024030.36712-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix a wrong IS_ERR() check in spacemit_i2s_probe() where `clk` was used
instead of `i2s->sspa_clk`.
Signed-off-by: Goko Mell <goku.sonxin626@gmail.com>
Link: https://patch.msgid.link/20251106-spacemit-i2s-fix-v1-1-ee2cedcdda23@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The return value of device_property_read_u32_array used for getting the
property is the status instead of the number of the property.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20251107054959.950-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With recent addition of wcd-common, lot of code duplication in
pm4125 codec can be removed now.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251014153541.283899-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20251106-restricted-pointers-stm-v1-1-7d03eb5020ba@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is some overlap with the cs4271 driver.
|
|
In the commit referenced by the Fixes tag, clk_hw_get_clk()
was added in va_macro_probe() to get the fsgen clock,
but forgot to add the corresponding clk_put() in va_macro_remove().
This leads to a clock reference leak when the driver is unloaded.
Switch to devm_clk_hw_get_clk() to automatically manage the
clock resource.
Fixes: 30097967e056 ("ASoC: codecs: va-macro: use fsgen as clock")
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20251106143114.729-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During firmware download, if the size of the firmware is too small,
it wrongly assumes the firmware download is successful. If there is
size mismatch with chunk's header, invalid memory is accessed.
Fix these issues by throwing error during these cases.
Fixes: 4cc9bd8d7b32 (ASoc: tas2783A: Add soundwire based codec driver)
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202510291226.2R3fbYNh-lkp@intel.com/
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251030151637.566-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The bus_find_device_by_name() function returns a device pointer with an
incremented reference count, but the original code was missing put_device()
calls in some return paths, leading to reference count leaks.
Fix this by ensuring put_device() is called before function exit after
bus_find_device_by_name() succeeds
This follows the same pattern used elsewhere in the kernel where
bus_find_device_by_name() is properly paired with put_device().
Found via static analysis and code review.
Fixes: 4f8ef33dd44a ("ASoC: soc_sdw_utils: skip the endpoint that doesn't present")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://patch.msgid.link/20251029071804.8425-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The probe function enables regulators at the beginning
but fails to disable them in its error handling path.
If any operation after enabling the regulators fails,
the probe will exit with an error, leaving the regulators
permanently enabled, which could lead to a resource leak.
Add a proper error handling path to call regulator_bulk_disable()
before returning an error.
Fixes: 9a397f473657 ("ASoC: cs4271: add regulator consumer support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251105062246.1955-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SDCA specification uses Q7.8 volume format.
This patch adds a field to indicate whether it is SDCA volume control
and supports the volume settings.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251106093335.1363237-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Component drivers can prepare snd_pcm_hardware struct based on the hardware
capabilities which information should not be discarded.
Only touch the rates, channels_max and formats if they were left to 0,
otherwise keep the provided configuration intact for the parameter cross
checking decision.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251029073600.13624-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>:
This patchset has 4 fixes and some enhancements to the Elite DSP driver
support.
Fixes includes
- setting correct flags for expected behaviour of appl_ptr
- fix closing of copp instances
- fix buffer alignment.
- fix state checks before closing asm stream
Enhancements include:
- adding q6asm_get_hw_pointer and ack callback support
- simplify code via __free(kfree) mechanism.
- use spinlock guards
- few cleanups discovered during doing above 2.
There is another set of updates comming soon, which will add support
for early memory mapping and few more modules support in audioreach.
|
|
After restructuring and splitting the HDMI codec driver code, each
HDMI codec driver contains the own build_controls and build_pcms ops.
A copy-n-paste error put the wrong entries for nvhdmi-mcp driver; both
build_controls and build_pcms are swapped. Unfortunately both
callbacks have the very same form, and the compiler didn't complain
it, either. This resulted in a NULL dereference because the PCM
instance hasn't been initialized at calling the build_controls
callback.
Fix it by passing the proper entries.
Fixes: ad781b550f9a ("ALSA: hda/hdmi: Rewrite to new probe method")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220743
Link: https://patch.msgid.link/20251106104647.25805-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The wavefront_send_sample() function has an integer overflow issue
when validating sample size. The header->size field is u32 but gets
cast to int for comparison with dev->freemem
Fix by using unsigned comparison to avoid integer overflow.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881B47789D1B060CE8BF4C3AFC2A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Clear substream pointers in close functions to avoid leaving dangling
pointers, helping to improve code safety and
prevents potential issues.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881DF762CAB45EE42F6D812AFC2A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
kernel-doc populated the below warning for the non
static function "snd_ac97_reset".
"Warning: ./sound/ac97_bus.c:56 No description found
for return value of 'snd_ac97_reset'".
Added the return values as per the kernel-doc format.
Signed-off-by: HariKrishna Sagala <hariconscious@gmail.com>
Link: https://patch.msgid.link/20251105105229.112172-2-hariconscious@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Clean up the code using guard() for spin locks.
No functional changes, just cleanup.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-21-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the code using guard() for spin locks.
No functional changes, just cleanup.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-20-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the code using guard() for spin locks.
No functional changes, just cleanup.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-19-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Clean up the code using guard() for spin locks.
No functional changes, just cleanup.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-18-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-17-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-16-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-15-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-14-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-13-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-12-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
remove unused variables in some of the audioreach functions.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-11-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Both capture and playback can have different runtimes, so set them
accordingly.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-10-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
