| Age | Commit message (Collapse) | Author |
|---|
|
Now full support for the UMP buffers is available, it is possible to
read the SDCA HID descriptors from the device and pass them to
user-space. Add a helper function to process HID events from an SDCA
device.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-20-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some IRQs (FDL) require processing before the primary soundcard is
brought up, as the downloaded files could be firmware required for
operation of the audio functions of the device. Add a new helper
function which registers the required IRQs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-19-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Several of the UMP transactions in the FDL process should timeout if the
device does not respond within a certain time, add handling into the UMP
helpers and the FDL code to handle this.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-18-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add some completions and a helper function to allow other parts of the
system to wait for FDL to complete. The sdca_fdl_sync() function will
wait until it completes a full time out without a new FDL request
happening, this ensures that even parts requiring multiple rounds of FDL
should be fully downloaded before the driver boot continues.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-17-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Hookup the XU IRQs required for the FDL process.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-16-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some instances of the XU Entity have a need for Files to be downloaded
from the Host. In these XUs, there is one instance of a Host to Device
(Consumer) UMP, identified by the FDL_CurrentOwner Control. FDL Library
introduced here implements the FDL flow triggered by FDL_CurrentOwner
irq, which sends a file from SoundWire File Table (SWFT) or from the
firmware directory in specific cases, to the Device FDL UMP.
Currently only Direct method of FDL is implemented.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-15-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add parsing of ACPI DisCo information specific to FDL (File DownLoad).
DisCo contains a list of File Sets which can be requested by the device
and within each of those a list of individual files to be downloaded to
the device. Optionally the contents of the files may also be present in
a special ACPI table, called SWFT (SoundWire File Table).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-14-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helper functions for handling Universal Message Passing (UMP)
buffers on SDCA devices. These are generic mechanisms to pass blocks of
binary data between the host and the device, in both directions. They
are used for things like passing HID descriptors and the File Download
process.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-13-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Parse the DisCo property to get the timeout for a Function Reset.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Parse the DisCo properties for XU Entities.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Whilst SDCA does specify an Access Mode for each Control, there is not a
1-to-1 mapping between that and ASoC's internal representation. Some
registers require being treated as volatile from the hosts perspective
even in their Access Mode is Read-Write. Add an explicit list of SDCA
controls that should be forced volatile.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the future some IRQs (mostly the UMPs used during File
DownLoad) will need to run after the device has enumerated on the
bus but before the soundcard is actually constructed. As such
refactor more of the IRQ handling to use raw device and regmap
pointers, rather than accessing things through the component.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a helper function to locate the sdca_interrupt structure for a given
SDCA IRQ, this makes the code a little more readable and will facilitate
some additions in the future.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently there is a flag to indicate if an IRQ has been requested by
something outside the SDCA core, such that the core can skip requesting
that IRQ. However, it is simpler and more useful to always store the
allocated IRQ number. This will allow the core to see if the IRQ has
been requested, to perform additional operations on the IRQ, and
request IRQs in multiple phases.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Store a copy of the device register map in the structure for the IRQ
handlers. This will allow the individual IRQ handlers access to the
device level register map if required.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SDCA HID code can't assume that the struct device it is passed is
the SoundWire slave device. HID is represented by a Function in SDCA and
will thus likely be implemented by a child driver. Update the code to
explicitly pass in the SoundWire slave device.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SDCA interrupt handling is a bit odd, the SDCA IRQ registers are
defined on a device level but the handling of the IRQ is at the
Function level. As such the regmap IRQ's PM runtime operations need to
be on the device itself to ensure those registers are available but an
additional runtime get is required for the Function child when the IRQ
is actually handled. Add the required manual PM runtime gets.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, the code assumes that the device that registered the
MBQ register map is the actual SoundWire slave device. This works
fine for all current users, however future SDCA devices will
likely be implemented with the SoundWire slave as a parent device
and separate child drivers with regmaps for each audio Function.
Update the regmap_init_sdw_mbq_cfg macro to allow these two
to be specified separately.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SDCA core processes two different struct device's at various times,
usually it is processing the struct device associated with an individual
SDCA Function driver. However, there are times that it is processing the
struct device associated with the actual SoundWire peripheral, usually
the parent of the Function device.
To ensure this distinction remains clear in the code, rename the variable
when handling the actual SoundWire device to sdev.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The quirk for Victus 15-fa1xxx wasn't working on Victus 15-fa1031nt due to a different board id. This patch enables the existing quirk for the board id 8BC8.
Tested on HP Victus 15-fa1031nt (MB 8C2D). The LED behaviour works as intended.
Signed-off-by: Eren Demir <eren.demir2479090@gmail.com>
Link: https://patch.msgid.link/20251027110208.6481-1-eren.demir2479090@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a set of test cases for cs_amp_set_efi_calibration_data().
Broadly there are two type of behavior being tested:
How the EFI is updated:
- Create a new EFI
- Overwrite part of existing content
- Overwrite part of zero-filled preallocated content
- Grow the file to append new content
And how the location within the content is chosen:
- Overwrite a specific array entry
- Overwrite an entry with the same calTarget (silicon ID)
- Overwrite a free entry
- Append after existing data
Plus some cases for error conditions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Set cs35l56_base->cal_index to the (zero-based) amp index derived
from cirrus,dev-index property.
This is so that factory calibration data will be written to the UEFI
array in the slot equal to the amp index, for compatibility with the
Windows driver.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new command 'store_uefi' to the calibrate debugfs file.
Writing this command will call cs_amp_set_efi_calibration_data()
to save the new data into a UEFI variable. This is intended to
be used after a successful factory calibration.
On systems without UEFI the write to the debugfs file will
return an error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add cs_amp_set_efi_calibration_data() to write an amp calibration
blob to UEFI calibration variable.
The UEFI variable will be updated or created as necessary.
- If a Vendor-specific variable exists it will be updated,
else if the Cirrus variable exists it will be update
else the Cirrus variable will be created.
Some collateral changes are required:
- cs_amp_convert_efi_status() now specifically handles
EFI_WRITE_PROTECTED error.
- cs_amp_get_cal_efi_buffer() can optionally return the name,
guid and attr of the variable it found.
- cs_amp_get_cal_efi_buffer() will update the 'size' field of
the returned data blob if it is zero. The BIOS could have
pre-allocated the UEFI variable as zero-filled
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a pointer argument to cs_amp_get_efi_variable() to optionally
return the EFI variable attributes.
Originally this function internally consumed the attributes from
efi.get_variable(). The calling code did not use the attributes
so this was a small simplification.
However, when writing to a pre-existing variable we would want to
pass the existing attributes to efi.set_variable(). This patch
deals with the change to return the attribute in preparation for
adding code to update the variable.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add test cases for the cs_amp_read_cal_coeffs() and
cs_amp_write_ambient_temp() functions.
In both cases the test is simply to confirm that the correct data
value(s) get passed back to the caller.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Create debugfs files that can be used to perform factory calibration.
During manufacture, the production line must perform a factory calibration
of the amps. This commit adds this functionality via debugfs files.
As this is only needed during manufacture, there is no need for this to be
available in a normal system so a Kconfig item has been added to enable
this. The new Kconfig option is inside a sub-menu because items do not
group and indent if the parent is invisible or there are multiple parent
dependencies. Anyway the sub-menu reduces the clutter.
cs35l56_hda_apply_calibration() has been changed to return an error code
that can be reported back through the debugfs write. The original call to
this function doesn't check the return code because in normal use it
doesn't matter whether this fails - the firmware will default to a safe
calibration for the platform. But tooling using the debugfs files might
want to know if there was an error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Create debugfs files that can be used to perform factory calibration.
During manufacture, the production line must perform a factory calibration
of the amps. This patch adds this functionality via debugfs files.
As this is only needed during manufacture, there is no need for this to be
available in a normal system so a Kconfig item has been added to enable
this. The new Kconfig option is inside a sub-menu because items do not
group and indent if the parent is invisible or there are multiple parent
dependencies. Anyway the sub-menu reduces the clutter.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add core code to support factory calibration. This can be used by both
the ASoC and HDA drivers.
This code consists of implementations of debugfs handlers for three
debugfs files used to start factory calibration and read the results.
This is not a full implementation of debugfs files. There are some
requirements to synchronize with the rest of the amp driver, and the way
this is done is significantly different between ASoC and HDA. Therefore
cs35l56-shared.c provides the main part of the file handlers, but the
files themselves are defined in the ASoC and HDA drivers with suitable
handling before calling into this shared code.
The cal_data file allows the calibration to be read and also for a
previous calibration to be written (for systems where the storage is not
something directly accessible to drivers, such as on filesystems). Code
outside the kernel should treat the content of cal_data as an opaque blob,
so the struct definition is not exported as a user API.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helper functions for performing factory calibration.
cs_amp_read_cal_coeffs() reads the results of a calibration into a
struct cirrus_amp_cal_data. The calTime member is also filled in with
the current time (which is defined to be in Windows format).
cs_amp_write_ambient_temp() writes a given temperature value to the
firmware control for ambient temperature.
The cs_amp_cal_target_u64() has been moved into the header file so
that it can be used by the calling code and by KUnit tests.
cs_amp_create_debugfs() creates a debugfs directory to contain
debugfs files related to calibration. This is placed in a directory
in debugfs root, named "cirrus_logic". The purpose of this is to
make it easier for tooling to find the files it needs by keeping
control of the layout under this directory. By contrast the ASoC
debugfs can vary between kernel releases and doesn't have a strictly
stable naming convention. HDA does not have a debugfs directory at all
and enabling the general ALSA debugfs (which is normally disabled) has
other side-effects.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Read the silicon ID from the amp during one-time cs35l56_hw_init()
and store it in struct cs35l56_base, instead of reading it from
registers every time it is needed.
Note that marking it non-volatile without a default in regmap isn't
a suitable alternative because this causes regcache_sync() to always
write the cached value out to the registers. This could trigger a bus
fault interrupt inside the amp, which we want to avoid.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'struct fsi_stream_handler' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
51837 12312 64 64213 fad5 sound/soc/renesas/fsi.o
After:
=====
text data bss dec hex filename
52125 12024 64 64213 fad5 sound/soc/renesas/fsi.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/88ca34df9006b74a7596b91714e700bcff666c4b.1761507792.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds settings to prevent the 'prepare clock stop failed' error.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20251027103333.38353-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cirrus Logic cs530x device family has 2 control buses I2C and SPI.
This patch adds SPI support.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023090327.58275-13-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In preparation for SPI support these structures should be renamed to
reflect that they are for i2c.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023090327.58275-11-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MCLK frequency must be 49.152 MHz (for 48 kHz-related
sample rates) or 45.1584 MHz (for 44.1 kHz-related sample rates).
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023090327.58275-10-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the read device ID is not the expected devtype derived from the
compatible device match then fail the probe as other configuration
details may be incorrect.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023090327.58275-9-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023090327.58275-8-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
- Added DAC register address constants
- Add the new registers to the regmap config
- Renamed constants that are shared between the DACs and ADCs
- Add the device IDs and device names of the CODEC and DACs along with
their different capabilities
- Add DAPM widgets, ALSA controls and event handling for the DAC
functionality
- Add Playback DAI support
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023090327.58275-7-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023090327.58275-5-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023090327.58275-4-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023090327.58275-3-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023090327.58275-2-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add "qcom,qrb2210-sndcard" to the list of recognizable devices.
Use "qcm2290" as name to let UCM to use it later. QRB2210 RB1
and other QCM2290-based boards can use this sndcard compatible.
Cc: Srinivas Kandagatla <srini@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20251022-qrb2210-qcm2290-sndcard-v2-2-32e9e269a825@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change array_size() to vmalloc_array(), due to vmalloc_array()
being optimized better, using fewer instructions, and handles
overflow more concisely.
Signed-off-by: tanze <tanze@kylinos.cn>
Link: https://patch.msgid.link/20251024105549.210654-1-tanze@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The log messages for the PreSonus STUDIO 1810c about
device_setup are not applicable to the 1824c, and should
not be logged when 1824c initializes.
Refactor from if statement to switch statement as there
might be more STUDIO series devices added later.
Fixes: 080564558eb1 ("ALSA: usb-audio: enable support for Presonus Studio 1824c within 1810c file")
Signed-off-by: Roy Vegard Ovesen <roy.vegard.ovesen@gmail.com>
Link: https://patch.msgid.link/aPaYTP7ceuABf8c7@ark
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch adds name_prefix for rt1321 part id in the codec_info_list.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251022073952.327451-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cs35l57 uses the same codec driver as cs35l56.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023110824.1587-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
The DSD little endian format requires the msb first, the previous
understanding is not correct. The issue is found by testing with
pipewire.
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Small set of patches two of which fix problems observed during shutdown
and XRUN scenarios for PCM streaming. These ensure HDAudio HOST stream
is reset and re-setup during XRUNs and synchronize avs_dai_fe_shutdown()
and period-elapsed work (thread) so that no slab-use-after-free panics
occur.
The last change makes the 'format' parameter provided by a
compress-application taken into account - currently its ignored. Such
approach helps us increase the coverage of data probing (debug)
functionality.
|
