| Age | Commit message (Collapse) | Author |
|---|
|
To reduce complexity of interrupt handling in following patch, ensure
audio channels are configured in the same order as timeslots on the
TDM bus. If we need a given ordering of audio sources in the audio
frame, it is possible to re-order codecs on the TDM bus, no need to
mix up timeslots in channels.
Acked-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://patch.msgid.link/4ff40afdf3d032b05dd4af6c0f777d4d4b445a76.1758209158.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Convert the Dialog DA7213 CODEC driver from an open-coded dev_pm_ops
structure to DEFINE_RUNTIME_DEV_PM_OPS(), to simplify the code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/0c001e0f7658c2d5f33faea963d6ca64f60ccea8.1756999876.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sc8280xp_be_hw_params_fixup()
Setting format to s16le is required for compressed playback on compatible
soundcards.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20250911154340.2798304-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix a potential integer overflow vulnerability in trace_filter_parse()
where the allocation size calculation could overflow.
The issue occurs when:
1. capacity is calculated by adding TRACE_FILTER_ELEMENTS_PER_ENTRY in a
loop for each entry found in the input string.
2. capacity * sizeof(**out) multiplication could overflow if many
entries are present in the input.
3. This results in a smaller allocation than expected, leading to
potential buffer overflow.
Replace kmalloc() with kmalloc_array() which provides built-in overflow
checking and will safely fail the allocation if overflow would occur,
preventing memory corruption.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Link: https://patch.msgid.link/20250909225111.3740029-1-samasth.norway.ananda@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove usage of dev_get_regmap, as this its more efficient to directly
reference the pointer.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-14-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove usage of dev_get_regmap, as this its more efficient to directly
reference the pointer.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-13-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Soundwire update_status, bus_config and interrupt callbacks for wcd937x,
wcd938x, wcd939x soundwire codecs are exactly identlical, move them to
common driver to remove this duplicate code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-12-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
for some reason we ended up with a boiler plate for dev_get_regmap in
wcd939x codec and started exporting a symbol for this. Remove this
redundant wrapper and direclty get regmap.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-11-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
component_ops for wcd97x, wcd938x, wcd939x soundwire codecs are exactly
identlical, move them to common driver to remove this duplicate code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-10-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sdw_ch_info and WCD_SDW_CH macro is duplicated across wcd937x, wcd938x,
wcd939x soundwire codec drivers. Move this to wcd common driver to
remove this code duplication.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-9-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All the Qualcomm WCD codecs have most of its code duplicated across all
these 3/4 drivers. This is an attempt to remove those duplicate
parts by adding a common helper library for these codecs.
To start with move all the micbias parsing and voltage settings these
are identical in WCD934x, WCD937x, WCD938x and WCD939x codec driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-8-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
use sdw_slave_get_current_bank() helper function, rather than duplicating
this function in every codec driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://patch.msgid.link/20250909121954.225833-7-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
use of_sdw_find_device_by_node helper function, rather than duplicating
this function in every codec driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-6-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For some reason we ended up with stub functions that are not inline,
this can result in build error if its included multiple places, as we will
be redefining the same function
Fixes: c99a515ff153 ("ASoC: codecs: wcd937x-sdw: add SoundWire driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250909121954.225833-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For some reason we endup with setting soundwire port for
HPHL_COMP and HPHR_COMP as zero, this can potentially result
in a memory corruption due to accessing and setting -1 th element of
port_map array.
Fixes: 82be8c62a38c ("ASoC: codecs: wcd937x: add basic controls")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20250909121954.225833-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Many drivers are directly setting dapm->idle_bias, but it will be
impossible soon. adds snd_soc_dapm_set_idle_bias() for them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfbavllj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Many drivers are directly using dapm->idle_bias, but it should get it
via get_idle_bias() function. Makes it as global function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/871pomx062.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current dapm_get_idle_bias() is unnecessarily complicated/confusable.
Tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/873492x066.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current soc-dapm is using "idle_bias_off", and its default settings
came from snd_soc_component "idle_bias_on". It is complicated/confusable.
Let's handling it as "idle_bias".
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/874itix06a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We can directly use suspend_bias_off via snd_soc_component, no need
to keep it on dapm. Remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/875xdyx06e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Now, snd_soc_dapm_to_component() (A) will convert dapm to component by
container_of() (a).
(A) static inline struct snd_soc_component *snd_soc_dapm_to_component(
struct snd_soc_dapm_context *dapm)
{
(a) return container_of(dapm, struct snd_soc_component, dapm);
}
dapm of component works, but dapm of card will be "unknown" pointer
(= not NULL), because (a) is using "container_of()".
OTOH, ASoC will call snd_soc_dapm_init() (X) to initialize dapm, and
it will be called from snd_soc_bind_card() (p) (for card) or
soc_probe_component() (q) (for component) with component pointer.
(p) static int snd_soc_bind_card(...)
{
...
(X) snd_soc_dapm_init(..., NULL);
... ^^^^
}
(q) static int soc_probe_component(...)
{
...
(X) snd_soc_dapm_init(..., component);
... ^^^^^^^^^
}
And snd_soc_dapm_init() (X) will fill dapm->component (x)
(X) void snd_soc_dapm_init(..., component, ...)
{
...
(x) dapm->component = component;
...
}
We can simply use dapm->component in snd_soc_dapm_to_component() (A).
In this case, dapm of card (p) will be just NULL.
Use dapm->component instead of container_of().
The picky note can be removed by this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87a53ax06q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Some drivers need to get card from dapm (which will be removed).
We need such function. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87bjnqx06v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because struct snd_soc_dapm_context is soc-dapm framework specific, user
driver don't need to access its member directly, we would like to hide
them. struct snd_soc_dapm_context will be removed from header in the
future.
Some drivers need to get dev from dapm (which will be removed).
We need such function. Add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cy86x06z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In ipc4_ssp_dai_config_pcm_params_match() when comparing params_channels()
against hw_config->tdm_slots the comparison should be a <= not a ==.
The number of TDM slots must be enough for the number of required channels.
But it can be greater. There are various reason why a I2S/TDM link has more
TDM slots than a particular audio stream needs.
The original comparison would fail on systems that had more TDM slots.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a07944a77e9 ("ASoC: SOF: ipc4-pcm: Look for best matching hw_config for SSP")
Link: https://patch.msgid.link/20250819160525.423416-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This laptop uses the ALC236 codec with COEF 0x7 and idx 1 to
control the mute LED. Enable the existing quirk for this device.
Signed-off-by: Praful Adiga <praful.adiga@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
A pile of fixes that accumilated over the past few -rcs, this is all
driver specifics including a small pile of quirks for new systems.
|
|
Check in snd_intel_dsp_check_soundwire() that the pointer returned by
ACPI_HANDLE() is not NULL, before passing it on to other functions.
The original code assumed a non-NULL return, but if it was unexpectedly
NULL it would end up passed to acpi_walk_namespace() as the start
point, and would result in
[ 3.219028] BUG: kernel NULL pointer dereference, address:
0000000000000018
[ 3.219029] #PF: supervisor read access in kernel mode
[ 3.219030] #PF: error_code(0x0000) - not-present page
[ 3.219031] PGD 0 P4D 0
[ 3.219032] Oops: Oops: 0000 [#1] SMP NOPTI
[ 3.219035] CPU: 2 UID: 0 PID: 476 Comm: (udev-worker) Tainted: G S
AW E 6.17.0-rc5-test #1 PREEMPT(voluntary)
[ 3.219038] Tainted: [S]=CPU_OUT_OF_SPEC, [A]=OVERRIDDEN_ACPI_TABLE,
[W]=WARN, [E]=UNSIGNED_MODULE
[ 3.219040] RIP: 0010:acpi_ns_walk_namespace+0xb5/0x480
This problem was triggered by a bugged DSDT that the kernel couldn't parse.
But it shouldn't be possible to SEGFAULT the kernel just because of some
bugs in ACPI.
Fixes: 0650857570d1 ("ALSA: hda: add autodetection for SoundWire")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The sanity check previously added to uaudio_transfer_buffer_setup()
assumed the allocated buffer being linear-mapped. But the buffer
allocated via usb_alloc_coherent() isn't always so, rather to be used
with (SG-)DMA API. This leaded to a false-positive warning and the
driver failed to work.
Actually uaudio_transfer_buffer_setup() deals only with the DMA-API
addresses for MEM_XFER_BUF type, while other callers of
uaudio_iommu_map() are with pages with physical addresses for
MEM_EVENT_RING and MEM_XFER_RING types. So this patch splits the
mapping helper function to two different ones, uaudio_iommu_map() for
the DMA pages and uaudio_iommu_map_pa() for the latter, in order to
handle mapping differently for each type. Along with it, the
unnecessary address check that caused probe error is dropped, too.
Fixes: 3335a1bbd624 ("ALSA: qc_audio_offload: try to reduce address space confusion")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reported-and-tested-by: Luca Weiss <luca.weiss@fairphone.com>
Closes: https://lore.kernel.org/DBR2363A95M1.L9XBNC003490@fairphone.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_seq_fifo_poll_wait() evaluates f->cells without locking after
poll_wait(), and KCSAN doesn't like it as it appears to be a
data-race. Although this doesn't matter much in practice as the value
is volatile, it's still better to address it for the mind piece.
Wrap it with f->lock spinlock for avoiding the potential data race.
Reported-by: syzbot+c3dbc239259940ededba@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=c3dbc239259940ededba
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Adjust register settings for SAR adc button detection mode
to fix noise issue in headset.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/766cd1d2dd7a403ba65bb4cc44845f71@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series adds handling for vendor-specific UEFI variables from Lenovo
and HP. These vendors will switch to using their UEFI variables instead
of the normal Cirrus Logic-defined mechanisms.
The model of speaker fitted (Speaker ID) is normally signaled by a GPIO,
and the driver is given access to this GPIO. Lenovo and HP will both stop
giving the driver access to the GPIO and instead the BIOS will create a
UEFI variable giving the value of the GPIO.
HP will also start using their own UEFI variable to store amp calibration
data. The content of the variable is the same as the Cirrus Logic variable,
only the UEFI name and GUID are changed.
Change in v2:
Removed unused target_uid variable and code that set it in patch 6.
Richard Fitzgerald (6):
ASoC: cs-amp-lib: Rename defines for Cirrus Logic EFI
ASoC: cs-amp-lib: Add handling for Lenovo and HP UEFI speaker ID
ASoC: cs35l56: Check for vendor-specific speaker ID value
ASoC: cs-amp-lib-test: Add tests for cs_amp_get_vendor_spkid()
ASoC: cs-amp-lib: Add HP-specific EFI variable for calibration data
ASoC: cs-amp-lib-test: Add test for getting cal data from HP EFI
include/sound/cs-amp-lib.h | 1 +
sound/soc/codecs/cs-amp-lib-test.c | 252 ++++++++++++++++++++++++++++-
sound/soc/codecs/cs-amp-lib.c | 139 +++++++++++++++-
sound/soc/codecs/cs35l56-shared.c | 12 +-
4 files changed, 395 insertions(+), 9 deletions(-)
--
2.39.5
|
|
Merge series from Alexey Klimov <alexey.klimov@linaro.org>:
PMICs like PM4125 have in-built audio codec IC. The series here
adds support for this codec driver: DT bindings and codec driver
itself that consists mainly of two parts: soundwire devices and
codec part itself.
This audio codec can be found on platforms like QCM2290 and
on Qualcomm QRB2210 RB1 board.
We are working on this together with Srini
(srinivas.kandagatla@oss.qualcomm.com or srini@kernel.org).
This driver also has a bit limited support for concurrent playback,
since line out path is connected to left input channel.
|
|
Merge series from Stefan Kerkmann <s.kerkmann@pengutronix.de>:
Add a CODEC driver for the TI PCM1754.
|
|
The audio codec is found in Qualcomm PM2250/PM4125 PMICs and is used on
platforms like Qualcomm QCM2290. It has soundwire interface and
corresponding RX and TX slave devices.
It has only two input channels: HPH left and right. The line output (LO)
is linked to HPHL so the hardware has some limitations regarding concurrent
playback via HPH and LO for instance.
The codec driver also uses WCD MBCH framework. The MBHC functionality is
implemented in a minimalistic way to enable IRQs and avoid different
issues with IRQs.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250915-pm4125_audio_codec_v1-v4-3-b247b64eec52@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>:
Fix the lpaif_type configuration for the I2S interface.
The proper lpaif interface type required to allow DSP to vote
appropriate clock setting for I2S interface and also Add support
for configuring the DAI format on MI2S interfaces to allow setting
the appropriate bit clock and frame clock polarity, ensuring correct
audio data transmissionover MI2S.
|
|
snd_pcm_group_lock_irq() acquires a spinlock_t and disables interrupts
via spin_lock_irq(). This also implicitly disables the handling of
softirqs such as TIMER_SOFTIRQ.
On PREEMPT_RT softirqs are preemptible and spin_lock_irq() does not
disable them. That means a timer can be invoked during spin_lock_irq()
on the same CPU. Due to synchronisations reasons local_bh_disable() has
a per-CPU lock named softirq_ctrl.lock which synchronizes individual
softirq against each other.
syz-bot managed to trigger a lockdep report where softirq_ctrl.lock is
acquired in hrtimer_cancel() in addition to hrtimer_run_softirq(). This
is a possible deadlock.
The softirq_ctrl.lock can not be made part of spin_lock_irq() as this
would lead to too much synchronisation against individual threads on the
system. To avoid the possible deadlock, softirqs must be manually
disabled before the lock is acquired.
Disable softirqs before the lock is acquired on PREEMPT_RT.
Reported-by: syzbot+10b4363fb0f46527f3f3@syzkaller.appspotmail.com
Fixes: d2d6422f8bd1 ("x86: Allow to enable PREEMPT_RT.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Adding HDMI-In capture support for the PTL products which doesn't have
onboard I2S codec. But need to support HDMI-In capture via I2S and
audio playback through HDMI/DP monitor.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250915025655.1154279-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use dev_get_drvdata(dev->parent) instead of dev_get_platdata(dev)
to correctly obtain acp_chip_info members in the acp I2S driver.
Previously, some members were not updated properly due to incorrect
data access, which could potentially lead to null pointer
dereferences.
This issue was missed in the earlier commit
("ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot"),
which only addressed set_tdm_slot(). This change ensures that all
relevant functions correctly retrieve acp_chip_info, preventing
further null pointer dereference issues.
Fixes: e3933683b25e ("ASoC: amd: acp: Remove redundant acp_dev_data structure")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250910171419.3682468-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PRODUCT_NAME is machine-specific. Use PRODUCT_FAMILY to ensure
the machine quirk is applied with consistent audio configurations
across Fatcat series products.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250915025456.1154200-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The QCS8275 board is based on Qualcomm's QCS8300 SoC family, and all
supported firmware files are located in the qcs8300 directory. The
sound topology and ALSA UCM configuration files have also been migrated
from the qcs8275 directory to the actual SoC qcs8300 directory in
linux-firmware. With the current setup, the sound topology fails
to load, resulting in sound card registration failure.
This patch updates the driver match data to use the correct driver name
qcs8300 for the qcs8275-sndcard, ensuring that the sound card driver
correctly loads the sound topology and ALSA UCM configuration files
from the qcs8300 directory.
Fixes: 34d340d48e595 ("ASoC: qcom: sc8280xp: Add support for QCS8275")
Cc: stable@vger.kernel.org
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250914131549.1198740-1-mohammad.rafi.shaik@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The persistent_buffer agreement is false when hda_cl_prepare() is
called. We should use the same value when hda_cl_cleanup() is called.
Fixes: 5d5cb86fb46ea ("ASoC: SOF: Intel: hda-sdw-bpt: add helpers for SoundWire BPT DMA")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250915024853.1153518-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If multiple instances of this driver are instantiated and try to send
concurrently then the single static buffer snd_serial_generic_tx_work()
will cause corruption in the data output.
Move the buffer into the per-instance driver data to avoid this.
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Refactor error handling in the PCM substream setup to combine redundant
checks and improve code readability. Free the dpcm structure and return
appropriate error codes (-EBUSY for HPI_ERROR_OBJ_ALREADY_OPEN, -EIO
for other errors) in a single block.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The issue was caused by incorrect configuration in the driver,
which prevented proper volume control on certain systems.
Signed-off-by: Bou-Saan Che <yungmeat@inboxia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The laptop does not contain valid _DSD for these amps, so requires
entries into the CS35L41 configuration table to function correctly.
Signed-off-by: Bou-Saan Che <yungmeat@inboxia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This laptop does not contain _DSD so needs to be supported using the
configuration table.
Signed-off-by: Bou-Saan Che <yungmeat@inboxia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,mca" anymore [1]. Use
"apple,t8103-mca" as base compatible as it is the SoC the driver and
bindings were written for.
[1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
|
|
This patch adds a new fixup for the ALC295 codec on some Dell
laptops that use the TAS2781 I2C amplifier.
The fixup correctly initializes the amplifier and pins, allowing
sound to work on all speakers of these devices.
The fixup chain is added to the relevant quirk entries for
Dell Polaris models.
[ adjusted for 6.17 kernel code by tiwai ]
Fixes: 1e9c708dc3ae ("ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projects")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1249575
Signed-off-by: Donald Menig <djmenig@outlook.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The size parameter of strscpy() is optional if the destination buffer
has a fixed length and strscpy() can automatically determine its size
using sizeof(). This makes many explicit size arguments redundant.
Remove them to shorten and simplify the code.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
