| Age | Commit message (Collapse) | Author |
|---|
|
Put all vmcs12 pages if KVM synthesizes a nested VM-Exit due to invalid
guest while emulating VMLAUNCH or VMRESUME. The invalid guest state path
doesn't use nested_vmx_vmexit() as that API is intended to be used if and
only if L2 is active, and the open coded equivalent neglects to put the
vmcs12 pages. Failure to put the vmcs12 pages leaks any pinned pages
(and/or mappings) if L1 retries VMLAUNCH/VMRESUME.
Note, the !from_vmenter scenario doesn't suffer the same problem, as
vmx_get_nested_state_pages() only gets/pins/maps the vmcs12 pages if L2 is
active, i.e. if a "full" VM-Exit is guaranteed before KVM will retry
getting vmcs12 pages.
Fixes: 96c66e87deee ("KVM/nVMX: Use kvm_vcpu_map when mapping the virtual APIC page")
Fixes: 3278e0492554 ("KVM/nVMX: Use kvm_vcpu_map when mapping the posted interrupt descriptor table")
Fixes: fe1911aa443e ("KVM: nVMX: Use kvm_vcpu_map() to get/pin vmcs12's APIC-access page")
Reported-by: Minh Nguyen <minhnguyen.080505@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fixes for 7.2
- more gmap KVM memory management fixes
- PCI passthru fixes
|
|
KVM x86 fixes for 7.2-rcN
- Fix a bug where KVM will trigger a UAF if updating IOMMU IRTEs fails when
registering an IRQ-bypass producer.
- Ignore pending PV EOI instead of BUG()ing the host if the feature was
disabled by the guest.
- Fix nVMX bugs where KVM would run L1 with an L1-controlled CR3 after a
failed "late" consistency check when KVM is NOT using EPT.
- Disallow intra-host migration/mirroring of SNP VMs as KVM doesn't yet
support moving/mirroring SNP state.
- Fix a TOCTOU bug in KVM's handling of the "trusted" CPUID for TDX guests.
- Fix a NULL pointer deref in trace_kvm_inj_exception() where a change to the
core infrastructure missed KVM's unique (ab)use of __print_symbolic().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.2, take #2
- Move locking for kvm_io_bus_get_dev() into the caller, ensuring
race-free checks that the returned object is of the correct type
- Fix initialisation of the page-table walk level when relaxing
permissions
- Correctly update the XN attribute when relaxing permissions
- Fix the sign extension of loads from emulated MMIO regions
- Assorted collection of fixes for pKVM's FFA proxy, together with a
couple of FFA driver adjustments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.2, take #1
- Fix an accounting buglet when reclaiming pages from a protected
guest
- Fix a bunch of architectural compliance issues when injecting a
synthesised exception, most of which were missing the PSTATE.IL bit
indicating a 32bit-wide instruction
- Another set of fixes addressing issues with translation of VNCR_EL2,
including corner cases where the guest point that register at a RO
page...
- Don't warn when trapping accesses to ZCR_EL2 from an L2 guest, as
that's not unexpected at all
- Address a bunch of races with LPI migration vs LPIs being disabled
- Fix a total howler of a bug combining FEAT_MOPS and NV, resulting in
exception returning in the wrong place...
- Coerce Fuad Tabba into a reviewer role, and may his Inbox catch
fire!
|
|
Sun Jian says:
====================
bpf: Reject negative const offsets for buffer pointers
Reject negative effective offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF
accesses. Calculate the effective access start using signed arithmetic
to prevent unsigned access-end accounting from wrapping, and cover both
load-time rejection and the raw tracepoint writable attach-time path.
---
Changes in v5:
- Simplify __check_buffer_access() to reject a negative effective start
after confirming that var_off is constant. Validate the combined
offset instead of rejecting negative instruction offsets separately.
Drop the duplicate BPF_MAX_VAR_OFF check because pointer arithmetic
already bounds constant offsets, and remove the redundant size < 0
check.
- Switch the raw tracepoint writable attach tests from nbd_send_request
to bpf_testmod_test_writable_bare_tp, avoiding the NBD configuration
dependency and its false-pass condition.
- Split the attach coverage into named subtests and require
bpf_raw_tracepoint_open() to return -EINVAL.
- Add verifier coverage for a negative constant PTR_TO_BUF offset.
Changes in v4:
- Correct the Fixes tag to point to 022ac0750883, where pointer offsets
were folded into reg->var_off.
- Drop the end > U32_MAX check, which is unreachable after bounding const
var_off with BPF_MAX_VAR_OFF while keeping instruction offsets and
access sizes bounded.
Changes in v3:
- Check constant var_off against +/-BPF_MAX_VAR_OFF before computing
the effective access range, matching the existing verifier pointer
offset convention.
- Keep explicit rejection of negative instruction offsets and keep
bounded negative constant var_off valid when the effective offset is
non-negative.
Changes in v2:
- Split the kernel fix and selftests into separate patches.
- Add an attach-time raw tracepoint writable test that exercises
max_tp_access against nbd_send_request's writable size.
- Adjust selftest formatting to use the 100 character line width.
Tested:
- ./test_progs -v -t verifier_raw_tp_writable
- ./test_progs -v -t verifier_ptr_to_buf
- ./test_progs -v -t raw_tp_writable_reject_bad_access
- ./test_progs -v -t raw_tp_writable_test_run
v4: https://lore.kernel.org/bpf/20260708090151.151729-1-sun.jian.kdev@gmail.com/
v3: https://lore.kernel.org/bpf/20260708040715.116680-1-sun.jian.kdev@gmail.com/
v2: https://lore.kernel.org/bpf/20260707060804.93561-1-sun.jian.kdev@gmail.com/
v1: https://lore.kernel.org/bpf/20260703035137.109608-1-sun.jian.kdev@gmail.com/
====================
Link: https://patch.msgid.link/20260714093846.18159-1-sun.jian.kdev@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Add verifier coverage for constant negative offsets on PTR_TO_TP_BUFFER
and PTR_TO_BUF pointers. Both programs adjust the buffer pointer by -8
and access it at offset zero, so the negative effective start must be
rejected at load time.
Switch the raw tracepoint writable attach checks from nbd_send_request
to bpf_testmod_test_writable_bare_tp, avoiding a dependency on the NBD
tracepoint. Keep the existing past-end case and add a case with a
negative var_off compensated by a positive instruction offset. The
effective start remains non-negative, so the program loads, but its
access end exceeds the writable context size and
bpf_raw_tracepoint_open() must return -EINVAL.
Cc: stable@vger.kernel.org # 5.2.0
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://patch.msgid.link/20260714093846.18159-3-sun.jian.kdev@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF
accesses, but it currently accepts a constant negative offset produced by
pointer arithmetic.
Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for
pointers") moved constant pointer offsets from reg->off to reg->var_off.
However, __check_buffer_access() continued to check only the instruction
offset. An access with reg->var_off equal to -8 and an instruction offset
of zero therefore passes verification.
For writable raw tracepoints, the access end is also calculated from the
unsigned reg->var_off.value. An eight-byte access starting at -8 wraps
the calculated end to zero, allowing the program to load and attach
without increasing max_tp_access.
After ensuring that reg->var_off is constant, calculate the effective
access start using signed arithmetic and reject it when it is negative.
Use the validated start to calculate the access end for both
PTR_TO_TP_BUFFER and PTR_TO_BUF.
Fixes: 022ac0750883 ("bpf: use reg->var_off instead of reg->off for pointers")
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Cc: stable@vger.kernel.org # 5.2.0
Link: https://patch.msgid.link/20260714093846.18159-2-sun.jian.kdev@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Mattia Meleleo says:
====================
bpf, sockmap: Fix FIONREAD for sockets without a verdict program
Sockets added to a sockmap/sockhash with no stream/skb verdict program
attached answer FIONREAD with 0 even when unread data is pending in
sk_receive_queue. Fix tcp_bpf_ioctl() to account for the receive queue
in that case, and add a selftest.
Changes in v3:
- Remove unused sk_psock_msg_inq()
- Link to v2: https://patch.msgid.link/20260708-fionread-no-verdict-v2-0-29dd293621c7@coralogix.com
Changes in v2:
- Split the fix and the selftest into separate patches
- Use READ_ONCE() to read the verdict program pointers
- Link to v1: https://patch.msgid.link/20260707-fionread-no-verdict-v1-1-ce94a72357ec@coralogix.com
Signed-off-by: Mattia Meleleo <mattia.meleleo@coralogix.com>
---
====================
Link: https://patch.msgid.link/20260708-fionread-no-verdict-v3-0-b4ee31b3af53@coralogix.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Add a test validating that FIONREAD on a TCP socket in a sockmap
without a verdict program reports data pending in sk_receive_queue.
Signed-off-by: Mattia Meleleo <mattia.meleleo@coralogix.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20260708-fionread-no-verdict-v3-2-b4ee31b3af53@coralogix.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
tcp_bpf_ioctl() answers SIOCINQ from psock->msg_tot_len, which only
counts bytes in ingress_msg. Without a stream/skb verdict program
nothing is diverted there: data stays in sk_receive_queue, so FIONREAD
returns 0 even though read() returns data.
Add tcp_inq() to the reported value when the psock has no verdict
program. The two queues are disjoint, so bytes redirected into
ingress_msg from other sockets stay correctly accounted through
msg_tot_len.
Remove unused sk_psock_msg_inq().
Fixes: 929e30f93125 ("bpf, sockmap: Fix FIONREAD for sockmap")
Signed-off-by: Mattia Meleleo <mattia.meleleo@coralogix.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20260708-fionread-no-verdict-v3-1-b4ee31b3af53@coralogix.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Check pm_runtime_force_resume() return value in resume. If it fails
(clock enable failure), return immediately since accessing hardware
registers on an unclocked device would cause a kernel panic.
The early return intentionally skips enable_irq() and
sdhci_disable_irq_wakeups() because the IRQ handler reads
SDHCI_INT_STATUS, which would also fault without clocks. The PM runtime
usage counter leak only affects this already-broken device instance and
is an acceptable tradeoff to preserve system stability.
Remove the return value check for mmc_gpio_set_cd_wake(host->mmc, false)
since disable_irq_wake() called internally always returns 0.
Also return 0 explicitly on the success path instead of propagating
stale return values.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Make pinctrl_pm_select_sleep_state() and mmc_gpio_set_cd_wake() failures
non-fatal in the suspend path. These failures only mean slightly higher
power consumption or missing CD wakeup capability, but should not block
system suspend.
Also change the function to always return 0 on the success path instead
of propagating non-fatal warning return values.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to
simplify error handling. pm_runtime_resume_and_get() automatically
drops the usage counter on failure, avoiding the need for a separate
pm_runtime_put_noidle() call. If it fails, the device is unclocked and
accessing hardware registers would cause a kernel panic, so return the
error immediately.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
When using WIFI out-of-band wakeup, an "irq xxx: nobody cared" warning
occurs. This happens because the usdhc interrupt is not disabled during
system suspend when device_may_wakeup() returns false.
The sequence of events leading to this issue:
1. System enters suspend without disabling usdhc interrupt
(because device_may_wakeup() returns false for usdhc device)
2. WIFI out-of-band wakeup triggers system resume via GPIO interrupt
3. WIFI sends a Card interrupt before usdhc has fully resumed
4. usdhc is still in runtime suspend state and cannot handle the
interrupt properly
5. The unhandled interrupt triggers "nobody cared" warning
Fix this by unconditionally disabling the usdhc interrupt during suspend
and re-enabling it during resume, regardless of the wakeup capability.
This ensures no interrupts are processed during the suspend/resume
transition.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
SDIO devices such as WiFi may keep power during suspend, so the MMC
core skips full card re-initialization on resume and directly restores
the host controller's ios timing to match the card. For DDR mode,
pm_runtime_force_resume() sets DDR_EN before the pin configuration is
restored from sleep state.
This is related to the SoC IP integration: switching pinctrl setting
(changing alt from GPIO to USDHC) impacts the internal loopback path.
If pinctrl configures the pad to GPIO function, once DDR_EN is set, the
DLL delay will be fixed based on the GPIO function loopback path. When
the pinctrl is later changed to USDHC function, the internal loopback
path changes, making the original fixed sample point no longer suitable
for the current loopback path. This causes persistent read CRC errors on
subsequent data transfers.
SD/eMMC running in DDR mode are unaffected as they are fully
re-initialized from legacy timing after resume.
Fix this by restoring the pinctrl state based on current timing mode
using esdhc_change_pinstate() before pm_runtime_force_resume(). This
ensures the correct pin configuration (e.g., 100/200MHz for UHS modes)
is applied before DDR_EN is set. Only restore for non-wakeup devices
since wakeup devices kept their active pin state during suspend.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
esdhc_change_pinstate() checks for pins_100mhz and pins_200mhz at the
top of the function and returns -EINVAL if either is not defined. This
prevents the default case from ever being reached, which means devices
with a sleep pinctrl state but without high-speed pin states (100mhz/
200mhz) can never restore their default pin configuration.
Move the IS_ERR checks for pins_100mhz and pins_200mhz into their
respective switch cases.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
sdhci_esdhc_imx_hwinit() unconditionally clears ESDHC_DLL_CTRL by
writing zero. For SDIO devices that keep power during system suspend
and operate in DDR mode, the card remains in DDR timing while the host
DLL override configuration is lost.
Extract the DLL override setup from esdhc_set_uhs_signaling() into
a helper esdhc_set_dll_override(), and call it on the resume path
when the card kept power and is using a DDR timing mode.
Fixes: 676a83855614 ("mmc: host: sdhci-esdhc-imx: refactor the system PM logic")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
tuning save/restore
The tuning save/restore during system PM is conditioned on
mmc_card_wake_sdio_irq(), but this check is unrelated to whether
tuning values need to be preserved. The actual requirement is that
the card keeps power during suspend and the controller is a uSDHC.
SDIO devices using out-of-band GPIO wakeup maintain power during
suspend but do not set the SDIO IRQ wake flag. In this case the
tuning delay values are not saved/restored.
Remove the unnecessary mmc_card_wake_sdio_irq() condition from both
the suspend save and resume restore paths.
Fixes: c63d25cdc59a ("mmc: sdhci-esdhc-imx: Save tuning value when card stays powered in suspend")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
Michal Luczaj says:
====================
bpf, sockmap: Fix sockmap leaking UDP socks
Fix for UDP sockets getting leaked during sockmap lookup/release.
Accompanied by selftests updates.
Two Sashiko's concerns to be addressed separately:
https://lore.kernel.org/bpf/20260626205814.BAC3C1F000E9@smtp.kernel.org/
Signed-off-by: Michal Luczaj <mhal@rbox.co>
---
Changes in v4:
- selftest: drop redundant `if (err)` [Sashiko]
- Link to v3: https://patch.msgid.link/20260702-sockmap-lookup-udp-leak-v3-0-ff8de8782468@rbox.co
Changes in v3:
- selftest: better error handling, ASSERT_*() macros [Sashiko]
- selftest: fix grammar, reorder patches [Kuniyuki]
- Link to v2: https://patch.msgid.link/20260626-sockmap-lookup-udp-leak-v2-0-7e7e201c951a@rbox.co
Changes in v2:
- selftest: drop the original, adapt old tests
- fix: change approach to rejecting unbound UDP [Kuniyuki]
- Link to v1: https://patch.msgid.link/20260623-sockmap-lookup-udp-leak-v1-0-05804f9308e4@rbox.co
To: Alexei Starovoitov <ast@kernel.org>
To: Daniel Borkmann <daniel@iogearbox.net>
To: Andrii Nakryiko <andrii@kernel.org>
To: Eduard Zingerman <eddyz87@gmail.com>
To: Kumar Kartikeya Dwivedi <memxor@gmail.com>
To: Martin KaFai Lau <martin.lau@linux.dev>
To: Song Liu <song@kernel.org>
To: Yonghong Song <yonghong.song@linux.dev>
To: Jiri Olsa <jolsa@kernel.org>
To: Emil Tsalapatis <emil@etsalapatis.com>
To: Shuah Khan <shuah@kernel.org>
To: John Fastabend <john.fastabend@gmail.com>
To: Jakub Sitnicki <jakub@cloudflare.com>
To: Jiayuan Chen <jiayuan.chen@linux.dev>
To: Eric Dumazet <edumazet@google.com>
To: Kuniyuki Iwashima <kuniyu@google.com>
To: Paolo Abeni <pabeni@redhat.com>
To: Willem de Bruijn <willemb@google.com>
To: "David S. Miller" <davem@davemloft.net>
To: Jakub Kicinski <kuba@kernel.org>
To: Simon Horman <horms@kernel.org>
To: Cong Wang <cong.wang@bytedance.com>
Cc: bpf@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
---
====================
Link: https://patch.msgid.link/20260707-sockmap-lookup-udp-leak-v4-0-f878346f27ab@rbox.co
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
sockmap now rejects unbound UDP sockets. Adjust test_maps. While at it,
check socket()'s return value.
This effectively reverts commit c39aa2159974 ("bpf, selftests: Fix
test_maps now that sockmap supports UDP").
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-4-f878346f27ab@rbox.co
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Update sockmap_listen to accommodate the recent change in sockmap that
rejects unbound UDP sockets.
TCP: Reject unbound and bound (unless established or listening).
UDP: Accept only bound sockets.
While at it, migrate to ASSERT_* and enforce reverse xmas tree.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-3-f878346f27ab@rbox.co
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
UDP sockets get SOCK_RCU_FREE set when (auto-)bound. This means
sk_is_refcounted(unbound) = true, while sk_is_refcounted(bound) = false.
Because sockmap accepts unbound UDP sockets, a BPF program can increment a
socket's refcount via lookup. If the socket is subsequently bound, the
transition from unbound to bound causes bpf_sk_release() to skip the
decrement of the refcount, causing a memory leak.
unreferenced object 0xffff88810bc2eb40 (size 1984):
comm "test_progs", pid 2451, jiffies 4295320596
hex dump (first 32 bytes):
7f 00 00 01 7f 00 00 01 d2 04 1b b7 04 d2 00 00 ................
02 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace (crc bdee079d):
kmem_cache_alloc_noprof+0x557/0x660
sk_prot_alloc+0x69/0x240
sk_alloc+0x30/0x460
inet_create+0x2ce/0xf80
__sock_create+0x25b/0x5c0
__sys_socket+0x119/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0xa1/0x5f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Instead of special-casing for refcounted sockets, reject unhashed UDP
sockets during sockmap updates, as there is no benefit to supporting those.
This effectively reverts the commit under Fixes, with two exceptions:
1. sock_map_sk_state_allowed() maintains a fall-through `return true`.
2. In the spirit of commit b8b8315e39ff ("bpf, sockmap: Remove unhash
handler for BPF sockmap usage"), the proto::unhash BPF handler is not
reintroduced.
Historical note: this issue is related to commit 67312adc96b5 ("bpf: reject
unhashed sockets in bpf_sk_assign").
Fixes: 0c48eefae712 ("sock_map: Lift socket state restriction for datagram sockets")
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-2-f878346f27ab@rbox.co
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Update sockmap_basic tests to bind sockets before they are used. This
accommodates the recent change in sockmap that rejects unbound UDP sockets.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-1-f878346f27ab@rbox.co
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
KVM RISC-V tracks guest local interrupt state with two bitmaps:
- irqs_pending: interrupts that should be visible to the guest
- irqs_pending_mask: interrupts whose pending state changed
The current code updates those bitmaps with independent atomic bitops
and assumes a multiple-producer, single-consumer protocol. That model
does not actually hold.
kvm_riscv_vcpu_sync_interrupts() is not a pure consumer. When the guest
changes guest-visible HVIP state, sync_interrupts() writes both
irqs_pending and irqs_pending_mask to reflect the new guest state back
into KVM state. As a result, irqs_pending and irqs_pending_mask form a
single logical state transition, but they are not updated atomically as
a pair.
This allows a race where a newly injected interrupt is lost. For
example:
CPU0 CPU1
---- ----
kvm_riscv_vcpu_set_interrupt(VS_SOFT)
set_bit(VS_SOFT, irqs_pending)
kvm_riscv_vcpu_sync_interrupts()
sees guest-cleared HVIP.VSSIP
sets irqs_pending_mask
clear_bit(IRQ_VS_SOFT, irqs_pending)
set_bit(VS_SOFT, irqs_pending_mask)
kvm_vcpu_kick()
After that interleaving, a later flush can update HVIP without VSSIP
even though a new virtual interrupt was injected. In practice, the
guest can remain blocked in WFI with work pending.
The same pending/mask protocol is shared by VS soft interrupts, PMU
overflow delivery, and AIA high interrupt synchronization, so the race
is not limited to one interrupt source.
Fix this by serializing all updates to irqs_pending and irqs_pending_mask
with a per-vCPU raw spinlock. This keeps the pending bit and the dirty
mask as one state transition across:
- set/unset interrupt
- guest HVIP sync
- interrupt flush to guest CSR state
- vCPU reset
- AIA CSR writes that clear dirty state
Use non-atomic bitmap operations while holding the lock. Hold the lock
across the AIA sync, flush, and pending checks as well, so both bitmap
words share the same serialization domain.
This intentionally replaces the existing lockless protocol instead of
trying to repair it with additional barriers. The problem is not memory
ordering on a single field; it is that two separate bitmaps encode one
shared state machine while both producers and sync paths can modify
them. A per-vCPU raw spinlock keeps the fix small, local, and suitable
for backporting.
Fixes: cce69aff689e ("RISC-V: KVM: Implement VCPU interrupts and requests handling")
Cc: stable@vger.kernel.org
Signed-off-by: Xie Bo <xb@ultrarisc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260715020359.1521354-2-xb@ultrarisc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The Alienware x16 R2 has two pairs of speakers, but the BIOS
marks pin 0x17 as unused, so only the pin 0x14 pair plays and
audio is very quiet/dull.
Apply ALC289_FIXUP_DUAL_SPK like on other Dell machines to set
up pin 0x17 and route it to DAC1. Tested on my x16 R2 with
kernel 6.18.38, and now all speakers play at full volume.
Signed-off-by: Oliver Ohrt <oliver@theohrts.com>
Link: https://patch.msgid.link/20260715070409.42696-1-oliver@theohrts.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The sound and microphone mute LEDs do not function on this newer
revision of the board (8AB8) while they do on the older 880D models.
I have verified this on another laptop which was manufactured before
the one with the issue.
Added the ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED from a G9 model, which
uses the same codec, to make it work. Tested on kernel version 7.1.3 on
the aforementioned newer revision notebook.
Signed-off-by: Marcel Kłos <marcel@marmak.net.pl>
Link: https://patch.msgid.link/4dab5622-9100-4730-8c99-b58da939549b@marmak.net.pl
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pages in ttm_pool_backup can be NULL or backup handles
(ttm_backup_page_ptr_is_handle()), neither of which can be passed to
set_pages_array_wb() or freed. Add a dedicated WB pass before the
dma/purge loop that walks allocations using the same i += num_pages
stride, skipping NULL and handle entries, and calls set_pages_array_wb()
once per contiguous run of real pages. Apply the same NULL/handle guard
to the dma/purge loop.
Fixes the following oops:
Oops: general protection fault, kernel NULL pointer dereference 0x0: 0000 [#1] SMP NOPTI
RIP: 0010:__cpa_process_fault+0xf8/0x770
RSP: 0018:ffffc90000a87718 EFLAGS: 00010287
RAX: 0000000000000000 RBX: ffffc90000a87868 RCX: 0000000000000000
RDX: 0000000000001000 RSI: 0005088000000000 RDI: ffffffff827c5f34
RBP: 0005088000000000 R08: ffffc90000a877cb R09: ffffc90000a877d0
R10: 0000000000000000 R11: 000000000000001b R12: 000ffffffffff000
R13: ffffc90000a87868 R14: ffffc90000a87868 R15: ffff88815b882ae0
FS: 0000000000000000(0000) GS:ffff8884ec840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f930b844000 CR3: 000000000262e003 CR4: 0000000008f70ef0
PKRU: 55555554
Call Trace:
<TASK>
__change_page_attr_set_clr+0x989/0xe90
? __purge_vmap_area_lazy+0x6c/0x3a0
? _vm_unmap_aliases+0x250/0x2a0
set_pages_array_wb+0x7f/0x120
ttm_pool_backup+0x4c9/0x5b0 [ttm]
? dma_resv_wait_timeout+0x3b/0xf0
ttm_tt_backup+0x32/0x60 [ttm]
ttm_bo_shrink+0x66/0x110 [ttm]
xe_bo_shrink_purge+0x12b/0x1b0 [xe]
xe_bo_shrink+0xbb/0x270 [xe]
__xe_shrinker_walk+0xf7/0x160 [xe]
xe_shrinker_walk+0x9d/0xc0 [xe]
xe_shrinker_scan+0x11f/0x210 [xe]
do_shrink_slab+0x13b/0x270
shrink_slab+0xf1/0x400
shrink_node+0x352/0x8a0
balance_pgdat+0x32c/0x700
kswapd+0x205/0x2f0
? __pfx_autoremove_wake_function+0x10/0x10
? __pfx_kswapd+0x10/0x10
kthread+0xd1/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x1b1/0x200
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: b63d715b8090 ("drm/ttm/pool, drm/ttm/tt: Provide a helper to shrink pages")
Cc: stable@vger.kernel.org
Assisted-by: GitHub_Copilot:claude-opus-4.8
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260702214815.4009271-1-matthew.brost@intel.com
|
|
Punching a hole after a large buffered write may leave the range
reported as data. Reproduce it with:
xfs_io -f \
-c "pwrite -b 3m -S 0x61 0 3m" \
-c "fpunch 1m 1m" \
-c "seek -h 0" \
-c "seek -d 1m" \
/mnt/test/repro
Punching 1 MiB at offset 1 MiB should produce:
0 1 MiB 2 MiB 3 MiB
| DATA | HOLE | DATA | EOF
Instead, the entire file is reported as data. SEEK_HOLE(0) returns EOF,
and SEEK_DATA(1M) returns 1M.
This happens because a dirty folio spanning the punched range can be
written back after the punch and refill the hole.
Fix this by flushing and waiting for dirty data in the punched range
before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA.
The xfstests generic/539 pass against Samba/ksmbd with this change.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Replace EXPORT_SYMBOL_FOR_MODULES() with EXPORT_SYMBOL_IF_KUNIT()
to mark the symbols as visible only if CONFIG_KUNIT is enabled.
Kunit test should import the namespace EXPORTED_FOR_KUNIT_TESTING to
use these marked symbols. This is the standard way for all KUnit
tests.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Replace EXPORT_SYMBOL_FOR_MODULES() with EXPORT_SYMBOL_IF_KUNIT()
to mark the symbols as visible only if CONFIG_KUNIT is enabled.
Kunit test should import the namespace EXPORTED_FOR_KUNIT_TESTING to
use these marked symbols. This is the standard way for all KUnit
tests.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Since commit 7dadeaa6e851 ("sched: Further restrict the preemption
modes"), powerpc always has CONFIG_PREEMPTION because only
CONFIG_PREEMPT and CONFIG_PREEMPT_LAZY are possible, even in
dynamic preemption mode (see sched_dynamic_mode).
As a consequence, need_irq_preemption() is always true and can be
removed.
And because commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY
feature") includes linux/irq-entry-common.h which already declares
sk_dynamic_irqentry_exit_cond_resched static key, asm/preempt.h
becauses useless and can be removed.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2bf10a0afffefb6aca44bf2f864cc17471a80e31.1781870889.git.chleroy@kernel.org
|
|
When using device tree CPU features (dt-cpu-ftrs), the kernel bypasses
the traditional cputable-based CPU identification and instead derives
CPU features from the device tree's "ibm,powerpc-cpu-features" node
provided by firmware.
However, CPU_FTR_P11_PVR is a kernel-internal feature flag used to
identify Power11 and later processors, and is not represented in the
device tree's ISA feature set. While ISA v3.1 support (indicated by
CPU_FTR_ARCH_31) is present on both Power10 and Power11, the
CPU_FTR_P11_PVR flag is specifically needed by code that must
distinguish between Power10 and Power11 processors.
Without this flag set, code that checks for Power11 using
cpu_has_feature(CPU_FTR_P11_PVR) will incorrectly return false on
Power11+ systems using dt-cpu-ftrs, leading to incorrect behavior.
This issue manifests specifically in powernv environments (bare-metal
or QEMU TCG with powernv machine type), where skiboot/OPAL firmware
provides the "ibm,powerpc-cpu-features" node, causing the kernel to
use dt-cpu-ftrs. The issue does not affect pseries guests, where SLOF
firmware does not provide this node, causing the kernel to fall back
to the traditional cputable path (identify_cpu) which correctly sets
CPU_FTR_P11_PVR during PVR-based CPU identification.
In powernv TCG guests, the missing flag causes KVM code to trigger
warnings when attempting to create KVM guests, as cpu_features shows
0x000c00eb8f4fb187 (missing bit 53) instead of the correct
0x002c00eb8f4fb187 (with bit 53 set).
Fix this by setting CPU_FTR_P11_PVR for all processors with
PVR >= PVR_POWER11 when ISA v3.1 support is detected in
cpufeatures_setup_start(). This approach ensures forward
compatibility with future processor generations.
Fixes: 96e266e3bcd6 ("KVM: PPC: Book3S HV: Add Power11 capability support for Nested PAPR guests")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260614173437.26352-1-amachhiw@linux.ibm.com
|
|
When krealloc() fails, free the original esi_buf before returning to
avoid a memory leak.
Fixes: 3c14b73454cf ("powerpc/pseries: Interface to represent PAPR firmware attributes")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260614142356.658212-2-thorsten.blum@linux.dev
|
|
mask_user_address() incorrectly checks for CONFIG_E500 instead of
CONFIG_PPC_E500, causing mask_user_address_isel() to not be used on
E500 hardware. Fix the check to use the correct name.
Fixes: 861574d51bbd ("powerpc/uaccess: Implement masked user access")
Cc: stable@vger.kernel.org # 7.0+
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Fixes: 861574d51bbd ("powerpc/uaccess: Implement masked user access")
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260615233729.29386-1-enelsonmoore@gmail.com
|
|
It was observed that /proc/stat had very large value for one ore more
CPUs. It was more visible after recent code simplifications around
cpustats.
System has 240 CPUs.
cat /proc/uptime;
194.18 46500.55
cat /proc/stat
cpu 5966 39 837032887 4650070 164 185 100 0 0 0
cpu0 108 0 837030890 19109 24 4 23 0 0 0
Since uptime is 194s, system time of each CPU can't be more than 19400.
Sum of system time of all CPUs can't be more than 19400*240 4656000.
In fact huge value is close to mftb(). Note mftb doesn't reset on powerVM
when the LPAR restart. It only resets when whole system resets. The same
issue exists for kexec too.
This happens since starttime is not setup at init time. Once it is set
then subsequent vtime_delta will return the right delta.
Fix it by initializing the starttime during CPU initialization. This
fixes the large times seen.
cat /proc/uptime; cat /proc/stat
15.78 3694.63
cpu 6035 35 1347 369479 23 144 49 0 0 0
cpu0 19 0 38 1508 0 1 14 0 0 0
Now, system time is reported as expected.
Fixes: cf9efce0ce31 ("powerpc: Account time using timebase rather than PURR")
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260605124329.377533-1-sshegde@linux.ibm.com
|
|
Add fsl,ifc to mpc85xx_common_ids so that of_platform_bus_probe
creates a platform device for the IFC node even without 'simple-bus'
in its compatible property. On P1010 and similar platforms the IFC
node is a direct child of the root, so it must be explicitly matched
to be populated.
Fixes: 0bf51cc9e9e5 ("powerpc: dts: mpc85xx: remove "simple-bus" compatible from ifc node")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260604043309.91280-1-rosenp@gmail.com
|
|
When CONFIG_RISCV_USER_CFI is enabled, the CFI version of the vDSO, has
a CFI landing pad instruction at the start of __vdso_rt_sigreturn. This
breaks libgcc's unwinding code which matches on the first two
instructions. Other unwinders that rely on similar instruction matching
may also be affected.
Since __vdso_rt_sigreturn is reached as part of signal-return handling
rather than via an indirect call/jump from userspace, it does not need a
CFI landing pad. Remove it and restore the instruction sequence expected
by existing unwinding code.
This matches what was done on arm64 in commit 9a964285572b ("arm64:
vdso: Don't prefix sigreturn trampoline with a BTI C instruction") for a
similar issue.
Cc: stable@vger.kernel.org
Fixes: 37f57bd3faea ("arch/riscv: compile vdso with landing pad and shadow stack note")
Co-authored-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://patch.msgid.link/20260623204058.498120-1-aurelien@aurel32.net
[pjw@kernel.org: fixed comment style]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
amdxdna_cmd_submit() calls xdna->dev_info->ops->cmd_submit()
unconditionally, but only aie2_dev_ops defines that callback.
aie4_vf_ops (the AIE4 SR-IOV virtual function) does not, so a user
AMDXDNA_EXEC_CMD ioctl on an AIE4 device reaches a NULL function-pointer
call and oopses the kernel. AIE4 submits work through a mapped user queue
and doorbell, not this ioctl path.
Reject the submission early with -EOPNOTSUPP when the device provides no
cmd_submit op, so the shared EXEC ioctl is a clean no-op on such devices.
Fixes: aac243092b70 ("accel/amdxdna: Add command execution")
Cc: stable@vger.kernel.org
Found by 0sec automated security-research tooling (https://0sec.ai).
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260713173030.87541-3-doruk@0sec.ai
|
|
amdxdna_drm_submit_execbuf() passes the user-supplied command BO handle
straight into amdxdna_cmd_submit() with drv_cmd == NULL. When the handle
is AMDXDNA_INVALID_BO_HANDLE (0), the block that fetches job->cmd_bo is
skipped, leaving it NULL, and no check rejects it on the user path (the
!job->cmd_bo guard lives inside the != INVALID branch).
The job is then armed and pushed to the DRM scheduler.
aie2_sched_job_run() takes the drv_cmd == NULL path and calls
amdxdna_cmd_set_state(job->cmd_bo) -> amdxdna_gem_vmap(NULL) ->
to_gobj(NULL)->dev, a NULL pointer dereference in the drm_sched worker.
A process with access to the accel node on a system with a probed AMD NPU
can trigger a kernel oops with a single AMDXDNA_EXEC_CMD ioctl
(cmd_handles = 0).
Only internal driver commands (SYNC_DEBUG_BO / ATTACH_DEBUG_BO)
legitimately pass AMDXDNA_INVALID_BO_HANDLE, and they always set drv_cmd.
Reject the invalid handle for user submissions (drv_cmd == NULL) at the
submit choke point so every user path is covered.
Fixes: aac243092b70 ("accel/amdxdna: Add command execution")
Cc: stable@vger.kernel.org
Found by 0sec automated security-research tooling (https://0sec.ai).
Assisted-by: 0sec:claude-opus-4-8
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260713173030.87541-2-doruk@0sec.ai
|
|
MediaTek mt65xx family SoCs have no auto restart, however, they still
support the WRRD mode in the hardware. Because auto_restart is set to 0,
the WRRD mode will be never enabled, leading to read errors.
Fix this by removing auto_restart check from the WRRD enable path.
Fixes: b49218365280 ("i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD")
Signed-off-by: Roman Vivchar <rva333@protonmail.com>
Cc: <stable@vger.kernel.org> # v6.18+
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260709-6572-6595-i2c-v2-1-b2fb8510d1d3@protonmail.com
|
|
The commit fixing the overlayfs mmap() and mprotect() access checks
failed to skip the execmem check in __file_map_prot_check() for the case
where the "mounter check" is being performed. This check should be
performed only against the credentials of the task that is calling
mmap()/mprotect(), since it doesn't pertain to the file itself, but
rather just gates the ability of the calling task to get an executable
memory mapping in general.
The purpose of the "mounter check" is to guard against using an
overlayfs mount to gain file access that would otherwise be denied to
the mounter. For execmem this is not relevant, as there is no further
file access granted based on it (notice that the file's context is not
used as the target in the check), so checking it also against the
mounter credentials would be incorrect.
Fix this by passing a boolean to [__]file_map_prot_check() and
selinux_mmap_file_common() that indicates if we are doing the "mounter
check" and skiping the execmem check in that case. Since this boolean
also indicates if we use current_cred() or the mounter cred as the
subject, also remove the "cred" argument from these functions and
determine it based on the boolean and the file struct.
Cc: stable@vger.kernel.org
Fixes: 82544d36b172 ("selinux: fix overlayfs mmap() and mprotect() access checks")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
If devm_platform_get_and_ioremap_resource() returns an error,
mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to
get the error code. This results in a use-after-free.
Save the error code before freeing tmp_res.
Fixes: b5b5b32081cd ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260714150808.85045-1-xuanqiang.luo@linux.dev
|
|
In stratix10_svc_drv_remove(), stratix10_svc_async_exit() was called
before client devices were unregistered. This created a race window
where child devices could still be issuing service requests through
the async channels after the async infrastructure had already been
torn down.
Unregister client devices before tearing down the async threads and
channels to ensure all in-flight service calls drain before the
underlying infrastructure is destroyed.
Fixes: bcb9f4f07061 ("firmware: stratix10-svc: Add support for async communication")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Define INTEL_SIP_SMC_STATUS_NO_RESPONSE (0x3) and handle it in
stratix10_svc_async_poll() the same way as INTEL_SIP_SMC_STATUS_BUSY,
returning -EAGAIN so callers can retry instead of treating the poll as
a hard failure.
When the Secure Device Manager has not yet produced a response for an
asynchronous transaction, ATF is expected to return
INTEL_SIP_SMC_STATUS_NO_RESPONSE. Without this handling, the service
layer maps the status to -EINVAL and async clients cannot distinguish
"not ready yet" from a real error.
Fixes: bcb9f4f07061 ("firmware: stratix10-svc: Add support for async communication")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The internal digital microphone on the MSI Vector A16 HX A8WIG is not
detected: the ACP platform devices are created, but snd_soc_acp6x_mach
never binds because the machine is missing from the DMI quirk table, so
no capture device shows up at all.
This is the same board as the already supported "Vector A16 HX A8WHG",
differing only in the trailing model code. Add the corresponding entry.
Signed-off-by: Antonio Ignacio Campos Ruiz <acamposruiz@gmail.com>
Link: https://patch.msgid.link/20260713165709.19489-1-acamposruiz@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In a full-duplex setup, when one direction (playback or capture) is
closed while the other is still running, imx_aif_shutdown() was
unconditionally calling snd_soc_dai_set_sysclk() with rate=0 for all
cpu/codec DAIs, which would disable the clock still needed by the
active stream.
Add snd_soc_dai_active() checks before clearing sysclk so that only
truly inactive DAIs have their clocks reset.
Fixes: 2260bc6ea8bd ("ASoC: imx-card: Add WM8524 support")
Cc: stable@vger.kernel.org
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://patch.msgid.link/20260710031333.3491445-1-chancel.liu@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Zero check unused SQE fields addr3 and pad2 for unlinkat. They're
not needed now, but could be used sometime in the future.
Signed-off-by: Yi Xie <xieyi@kylinos.cn>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://patch.msgid.link/20260714030306.64820-1-xieyi@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The provided-buffer validation fix deferred freeing a cached iovec
until validation completed. However, the deferred free uses arg->iovs.
After a grow, that points to the newly allocated array. Without a grow,
it points to the cached array that remains in use.
This leaves the caller with a dangling iovec in both cases and can
result in repeated frees. Only free org_iovs when arg->iovs actually
replaced it.
Fixes: cd053d788c3f ("io_uring: fix dangling iovec after provided-buffer bundle grow failure")
Assisted-by: Codex:gpt-5.3-codex-spark
Signed-off-by: Jaeyeong Lee <iostreampy@proton.me>
Link: https://patch.msgid.link/20260712142612.188695595-iostreampy@proton.me
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
D3 resume notification handlers read firmware notification fields
before validating that the payload contains the complete fixed structure.
This causes buffer underread on malformed or truncated notifications.
Move payload length validation to occur before any field access in:
- iwl_mvm_parse_wowlan_info_notif: validate before reading num_mlo_link_keys
- iwl_mvm_wait_d3_notif D3_END handler: validate before reading flags
Assisted-by: GitHub Copilot <copilot@github.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260714141909.762193753434.I148991b8136cc5042fa08b5faf7b57d38aa2fb47@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
