diff options
Diffstat (limited to 'include/configs/ls1028ardb.h')
| -rw-r--r-- | include/configs/ls1028ardb.h | 99 |
1 files changed, 20 insertions, 79 deletions
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index 613abc50567..1811825baeb 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -50,85 +50,26 @@ /* Initial environment variables */ #ifndef SPL_NO_ENV #undef CFG_EXTRA_ENV_SETTINGS -#define CFG_EXTRA_ENV_SETTINGS \ - "board=ls1028ardb\0" \ - "hwconfig=fsl_ddr:bank_intlv=auto\0" \ - "fdtfile=fsl-ls1028a-rdb.dtb\0" \ - "image=Image\0" \ - "extra_bootargs=iommu.passthrough=1 arm-smmu.disable_bypass=0\0" \ - "othbootargs=video=1920x1080-32@60 cma=640M\0" \ - "ramdisk_addr=0x800000\0" \ - "ramdisk_size=0x2000000\0" \ - "bootm_size=0x10000000\0" \ - "kernel_addr=0x01000000\0" \ - "scriptaddr=0x80000000\0" \ - "scripthdraddr=0x80080000\0" \ - "fdtheader_addr_r=0x80100000\0" \ - "kernelheader_addr_r=0x80200000\0" \ - "load_addr=0xa0000000\0" \ - "kernel_addr_r=0x81000000\0" \ - "fdt_addr_r=0x90000000\0" \ - "ramdisk_addr_r=0xa0000000\0" \ - "kernel_start=0x1000000\0" \ - "kernelheader_start=0x600000\0" \ - "kernel_load=0xa0000000\0" \ - "kernel_size=0x2800000\0" \ - "kernelheader_size=0x40000\0" \ - "kernel_addr_sd=0x8000\0" \ - "kernel_size_sd=0x14000\0" \ - "kernelhdr_addr_sd=0x3000\0" \ - "kernelhdr_size_sd=0x20\0" \ - "console=ttyS0,115200\0" \ - "console_dbg=earlycon=uart8250,mmio,0x21c0500\0" \ - BOOTENV \ - "boot_scripts=ls1028ardb_boot.scr\0" \ - "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \ - "scan_dev_for_boot_part=" \ - "part list ${devtype} ${devnum} devplist; " \ - "env exists devplist || setenv devplist 1; " \ - "for distro_bootpart in ${devplist}; do " \ - "if fstype ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "bootfstype; then " \ - "run scan_dev_for_boot; " \ - "fi; " \ - "done\0" \ - "boot_a_script=" \ - "load ${devtype} ${devnum}:${distro_bootpart} " \ - "${scriptaddr} ${prefix}${script}; " \ - "env exists secureboot && load ${devtype} " \ - "${devnum}:${distro_bootpart} " \ +#define CFG_EXTRA_ENV_SETTINGS \ + BOOTENV \ + "boot_scripts=ls1028ardb_boot.scr\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ "${scripthdraddr} ${prefix}${boot_script_hdr} " \ - "&& esbc_validate ${scripthdraddr};" \ - "source ${scriptaddr}\0" \ - "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \ - "sf probe 0:0 && sf read $load_addr " \ - "$kernel_start $kernel_size ; env exists secureboot &&" \ - "sf read $kernelheader_addr_r $kernelheader_start " \ - "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ - " bootm $load_addr#$board\0" \ - "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \ - "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \ - "&& hdp load $load_addr 0x2000\0" \ - "sd_bootcmd=echo Trying load from SD ...;" \ - "mmc dev 0;mmcinfo; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ - "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" \ - "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \ - "mmc dev 0;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ - "&& hdp load $load_addr 0x2000\0" \ - "emmc_bootcmd=echo Trying load from EMMC ..;" \ - "mmc dev 1;mmcinfo; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ - "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" \ - "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \ - "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ - "&& hdp load $load_addr 0x2000\0" + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" #endif #endif /* __LS1028A_RDB_H */ |