| Age | Commit message (Collapse) | Author |
|---|
|
Replace traditional `#ifndef`/`#define`/`#endif` include guards with
`#pragma` once.
`#pragma once` is a widely supported preprocessor directive that
prevents header files from being included multiple times. It is
supported by all toolchains used to build edk2: GCC, Clang/LLVM, and
MSVC.
Compared to macro-based include guards, `#pragma once`:
- Eliminates the risk of macro name collisions or copy/paste errors
where two headers inadvertently use the same guard macro.
- Eliminate inconsistency in the way include guard macros are named
(e.g., some files use `__FILE_H__`, others use `FILE_H_`, etc.).
- Reduces boilerplate (three lines replaced by one).
- Avoids polluting the macro namespace with guard symbols.
- Can improve build times as the preprocessor can skip re-opening the
file entirely, rather than re-reading it to find the matching
`#endif` ("multiple-include optimization").
- Note that some compilers may already optimize traditional include
guards, by recognzining the idiomatic pattern.
This change is made acknowledging that overall portability of the
code will technically be reduced, as `#pragma once` is not part of the
C/C++ standards.
However, this is considered acceptable given:
1. edk2 already defines a subset of supported compilers in
BaseTools/Conf/tools_def.template, all of which have supported
`#pragma once` for over two decades.
2. There have been concerns raised to the project about inconsistent
include guard naming and potential macro collisions.
Approximate compiler support dates:
- MSVC: Supported since Visual C++ 4.2 (1996)
- GCC: Supported since 3.4 (2004)
(http://gnu.ist.utl.pt/software/gcc/gcc-3.4/changes.html)
- Clang (LLVM based): Since initial release in 2007
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
|
|
Now that the ResetVectors are USER_DEFINED modules, they will not
be linked against StackCheckLibNull, which were the only modules
causing issues. So, we can now remove the kludge we had before
and the requirement for every DSC to include StackCheckLibNull
for SEC modules and just apply StackCheckLibNull globally.
This also changes every DSC to drop the SEC definition of
StackCheckLibNull.
Continuous-integration-options: PatchCheck.ignore-multi-package
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
|
|
In PcRtcInit(), it always read RTC time and then write it back. It could
potentially cause two issues:
1) There is time gap between read RTC and write RTC, writing RTC time on
every boot could cause RTC time drift after many reboot cycles
2) Writing RTC registers on every boot could cause some unnecessary delay,
slightly impact the boot performance.
The change is only writing RTC time when 1) the current RTC time is not
valid or 2) the RegisterB value is changed.
Signed-off-by: Chen Lin Z <lin.z.chen@intel.com>
|
|
Legacy BIOS design sets only the Update Cycle Inhibit (SET) bit when
changing the RTC time. Update Cycle Inhibit Bit may not be supported
by the backend device (Common I2C RTC device). It could add Division
Chain Select (DV) bit to stop the RTC first (Write to 0x07), Changing
the RTC time and then Set the DV bit back.
Signed-off-by: Di Zhang <di.zhang@intel.com>
|
|
Add Null implementation of StackCheckLib.
Signed-off-by: Oliver Smith-Denny <osde@linux.microsoft.com>
|
|
Adds an entry to the package's CI configuration file that enable policy
5 for stuart_pr_eval. With this Policy, all INFs used by the package are
extracted from the provided DSC file and compared against the list of
changed *.inf (INF) files in the PR. If there is a match, stuart_pr_eval
will specify that this package is affected by the PR and needs to be
tested.
Signed-off-by: Joey Vagedes <joey.vagedes@gmail.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4659
When HPET timer is used as the timer interrupt and nested
interrupts into the HPET timer interrupt handler occur, the
elapsed time passed into the DXE Core is sometime too large
and this causes the DXE Core internal system time to run too
fast. Fix the logic so the previous main counter value stored
in the module global variable mPreviousMainCounter is always
captured before the timer notification function is called.
Without this change, mPreviousMainCounter is updated after
the timer notification function is called and when nesting
occurs, it updates with the value from the first level of
nesting which is further back in time than the interrupt from
the deepest level of nesting. This causes the next two timer
interrupts to compute a TimerPeriod that is twice the actual
time period since the last interrupt and this causes the DXE
Core internal time to run faster than expected.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
The DXE & MM standalone variant of AcpiTimerLib defines a global
named mPerformanceCounterFrequency. A global with an identical
name is also present in MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
Since XhciDxe has a dependency on TimerLib, this can cause link
errors due to the same symbol being defined twice if the platform
DSC chooses to use AcpiTimerLib as the TimerLib implementation for
any given platform.
To resolve this, I have changed made the definition of
mPerformanceCounterFrequency to static and renamed it to
mAcpiTimerLibTscFrequency. Since this variable is not used outside
of the DxeStandaloneMmAcpiTimerLib.c compilation unit, there is no
reason to have it exported as a global.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
|
|
PcatRealTimeClockRuntimeDxe seems to have copied the interface name
LibRtcVirtualNotifyEvent() from EmbeddedPkg's RealTimeClockLib class.
That's not right, for two reasons:
- PcatRealTimeClockRuntimeDxe doesn't consume "EmbeddedPkg.dec" in the
first place,
- in EmbeddedPkg, the RealTimeClockLib class API
LibRtcVirtualNotifyEvent() is about to be eliminated (it's a bogus API).
Rename the LibRtcVirtualNotifyEvent() function to VirtualNotifyEvent(),
and make it static.
Tested with booting OVMF.
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4564
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231012091057.108728-2-lersek@redhat.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
|
|
RTC runtime is unable to get dynamic PCD value after booting to
OS using runtime services.
Resolution: Cache the dynamic PCD value in RTC driver entry point
Cc: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
Fixes CodeQL alerts for CWE-457:
https://cwe.mitre.org/data/definitions/457.html
Cc: Erich McMillan <emcmillan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Ray Ni <ray.ni@intel.com>
Co-authored-by: Erich McMillan <emcmillan@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Oliver Smith-Denny <osd@smith-denny.com>
|
|
Add bounds checks of PcdRtcDefaultYear to guarantee that the year
is always between PcdMinimalValidYear and PcdMaximalValidYear.
This is required to make the following commit a backwards compatible
change and guarantee and invalid year is never set.
https://github.com/tianocore/edk2/commit/d55d73152ebf5c793b645d6ec5bc517d219881cd
This is required because use of an expression in the DEC file
PCD default value is only used to determine the DEC default values.
If an INF/DSC overrides PcdRtcDefaultYear, then the DEC expression
for PcdMinimalValidYear is not applied again.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
Add PcdRtcDefaultYear to specify the default year to use when
the RTC is in an invalid state. Make sure PcdRtcDefaultYear is
>= PcdMinimalValidYear and <= PcdMaximalValidYear. Set the
default value for this PCD to PcdMinimalValidYear to preserve
the existing behavior. A platform DSC file can override this
default value setting.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
Because UefiCpuPkg/UefiCpuLib is merged to MdePkg/CpuLib, remove the
dependency of UefiCpuLib.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4193
In order to remove RTC_INDEX/RTC_TARGET from
the UplBuild macro list,change the RTC_INDEX
/RTC_TARGET type from PcdsFixedAtBuild to PcdsDynamicEx
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: James Lu <james.lu@intel.com>
Reviewed-by: Gua Guo <gua.guo@intel.com>
Signed-off-by: KasimX Liu <kasimx.liu@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3913
The original flow of PcRtcInit() is like:
1. Guarantee atomic accesses to the RTC time registers and
read out the value.
2. Program RTC register B. (adopt 12h mode or 24h mode. Current
bios code sets RTC to 24h mode by default).
3. Then function ConvertRtcTimeToEfiTime converts the RTC time
value to their 24h mode by checking the hour format bit
(1:24h mode,0:12h mode).
And here lies the problem: Step3 will fail to adjust the value
if Step2 already sets RTC to 24h mode. The hour value in 12h mode
will not be converted to its 24h mode.
The solution is to program RTC register B a little later when all
the original RTC registers' value is retrieved, adjusted
and validated.
ConvertRtcTimeToEfiTime is modified to be more robust.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhuoran Chao <zhuoran.chao@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3737
Apply uncrustify changes to .c/.h files in the PcAtChipsetPkg package
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3767
Update use of DEBUG_CODE(Expression) if Expression is a complex code
block with if/while/for/case statements that use {}.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3760
Update all use of ', OPTIONAL' to ' OPTIONAL,' for function params.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3739
Update all use of EFI_D_* defines in DEBUG() macros to DEBUG_* defines.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3246
MdeLibs.dsc.inc was added for some basic/default library
instances provided by MdePkg and RegisterFilterLibNull Library
was also added into it as the first version of MdeLibs.dsc.inc.
So update platform dsc to consume MdeLibs.dsc.inc for
RegisterFilterLibNull which will be consumed by IoLib and BaseLib.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
|
|
This change added a new instance of AcpiTimerLib for StandaloneMm core
and drivers. It centralizes the common routines into shared files and
abstract the library constructor into corresponding files to accommodate
each constructor function prototypes.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
Some virtual machine managers like Kvmtool emulate the MC146818
RTC controller in the MMIO space so that architectures that do
not support I/O Mapped I/O can use the RTC. This patch adds MMIO
support to the RTC controller driver.
The PCD PcdRtcUseMmio has been added to select I/O or MMIO support.
If PcdRtcUseMmio is:
TRUE - Indicates the RTC port registers are in MMIO space.
FALSE - Indicates the RTC port registers are in I/O space.
Default is I/O space.
Additionally two new PCDs PcdRtcIndexRegister64 and
PcdRtcTargetRegister64 have been introduced to provide the base
address for the RTC registers in the MMIO space.
When MMIO support is selected (PcdRtcUseMmio == TRUE) the driver
converts the pointers to the RTC MMIO registers so that the
RTC registers are accessible post ExitBootServices.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
|
|
Add configuration ExceptionList and IgnoreFiles for package config
files. So users can rely on this to ignore some Ecc issues.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
Add configuration IgnoreFiles for package config files.
So users can rely on this to skip license conflict for
some generated files.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
In preparation for moving StandardSignatureIsAuthenticAMD to UefiCpuLib
in UefiCpuPkg, PcAtChipset/PcAtChipsetPkg.dsc needs LibraryClass
UefiCpuLib.
LocalApicLib|UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.inf will need
UefiCpuLib LibraryClass. Likely most "real" platforms will be using
BaseX2XApicLib instance which already required UefiCpuLib.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
Message-Id: <20200622131825.1352-2-Garrett.Kirkendall@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
Correctly write 'serial', remove duplicated 'the'.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-62-philmd@redhat.com>
|
|
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add YAML file to the package directory with the
configuration of the checks to perform during a
CI build.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=2263
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
PcdRealTimeClockUpdateTimeout is now defined in MdeModulePkg.dec.
This is the only reason that causes PcAtChipsetPkg depends on
MdeModulePkg.
Move the PCD from MdeModulePkg.dec to PcAtChipsetPkg.dec removes
such dependency.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1844
The commit will remove the below modules from PcAtChipsetPkg:
* PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
* PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
* PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
They are considered legacy framework components and will no longer be used
after the removal of IntelFramework[Module]Pkg.
Also, the unused (after the modules being removed) PCDs will be deleted in
package level DEC/UNI files.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=1373
Replace BSD 2-Clause License with BSD+Patent License. This change is
based on the following emails:
https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html
https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html
RFCs with detailed process for the license change:
V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html
V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html
V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1646
Add the IdeControllerDxe driver to the [Components] section
to make sure it would build correctly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=967
Request to add a library function for GetAcpiTable() in order
to get ACPI table using signature as input.
After evaluation, we found there are many duplicated code to
find ACPI table by signature in different modules.
This patch updates PcatRealTimeClockRuntimeDxe to use new
EfiLocateFirstAcpiTable() and remove the duplicated code.
Cc: Younas khan <pmdyounaskhan786@gmail.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
1. Do not use tab characters
2. No trailing white space in one line
3. All files must end with CRLF
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
In certain HW implementation, the BIT7 of RTC Index register(0x70) is
for NMI sources enable/disable but the BIT7 of 0x70 cannot be read
before writing. Software which doesn't want to change the NMI sources
enable/disable setting can write to the alias register 0x74, through
which only BIT0 ~ BIT6 of 0x70 is modified.
So two new PCDs are added so that platform can have the flexibility
to change the default RTC register addresses from 0x70/0x71 to
0x74/0x75.
With the new PCDs added, it can also support special HW that provides
RTC storage in a different register pairs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
|
|
In V2:
1) Update PeiAcpiTimerLib base name to PeiAcpiTimerLib
2) Update PeiAcpiTimerLib to add the missing constructor to enable ACPI IO space
3) Update DxeAcpiTimerLib to cache frequency in constructor.
PeiAcpiTimerLib caches PerformanceCounterFrequency in HOB, then Pei and Dxe
AcpiTimerLib can share the same PerformanceCounterFrequency.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
|
|
Cc: Leo Duran <leo.duran@amd.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Use FixedPCD's to set platform-specific values for RTC registers.
Specifically, the replaced macros are:
1) RTC_INIT_REGISTER_A
2) RTC_INIT_REGISTER_B
3) RTC_INIT_REGISTER_D
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Define FixedPCD's to replace macros in RTC driver, to allow
for platform-specific configurations.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
Done:
if (EFI_ERROR (Status)) {
if (PciIo != NULL && Enabled) {
PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationSet,
OriginalAttributes,
NULL
);
}
}
In above codes, VS2012/VS2010 will report that "OriginalAttributes"
will be used without initialization. But in fact, when the if expression
is true(if (PciIo != NULL && Enabled)), the "OriginalAttributes" must be
initialized. In order to fix this false positive issue, we initialize the
"OriginalAttributes" after declaration.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=405
The original code enables some BITs in PCI attributes in Start(),
but wrongly to disable these BITs in Stop().
The correct behavior is to save the original PCI attributes before
enables some BITs in Start(), and restore to original value
in Stop().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=642
Add top level License.txt file with the BSD 2-Clause
License that is used by the majority of the EKD II open
source project content. Merge copyright statements
from the BSD 2-Clause License files in each package
directory and remove the duplication License.txt
file from package directories.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=629
Move Contributions.txt that contains the TianoCore
Contribution Agreement 1.0 to the root of the edk2
repository and remove the duplicate Contributions.txt
files from all packages.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
|
|
https://bugzilla.tianocore.org/show_bug.cgi?id=553
Remove left shift of negative values that always evaluate
to 0 to address build errors from the llvm/clang compiler
used in the XCODE5 tool chain.
Clang rightfully complains about left-shifting ~DLAB. DLAB is #defined
as 0x01 (an "int"), hence ~DLAB has value (-2) on all edk2 platforms.
Left-shifting a negative int is undefined behavior.
Rather than replacing ~DLAB with ~(UINT32)DLAB, realize that the nonzero
bits of (~(UINT32)DLAB << 7) would all be truncated away in the final
conversion to UINT8 anyway. So just remove (~DLAB << 7).
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
