| Age | Commit message (Collapse) | Author |
|---|
|
Summary changes:
- disable building-in initramfs image
- enable brcmfmac driver
- disable USB_FUNCTIONFS. CONFIG_USB_FUNCTIONFS (g_ffs) is legacy.
We have to disable it and use another init sequence for adb
devices.
- enable configs needed by adbd
Signed-off-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
Summary changes:
- disable building-in initramfs image
- disable USB_FUNCTIONFS. CONFIG_USB_FUNCTIONFS (g_ffs) is legacy.
We have to disable it and use another init sequence for adb
devices.
- vim1: enable CONFIG_USB_CONFIGFS
Signed-off-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
Signed-off-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
Summary changes:
- enable usb gadget support
- disable USB_FUNCTIONFS
- enable configs needed by adbd
Signed-off-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Signed-off-by: Jan Dakinevich <yvdakinevich@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
Signed-off-by: Jan Dakinevich <yvdakinevich@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
The A1 audio clock controller requires a reference to the audio reset
line provided by the Meson aux reset controller. Add the 'resets'
property to the audio clock controller node to properly reference
RESET_AUDIO.
Fixes: ff94f1aeb2b9 ("arm64: dts: meson: a1: add audio devices")
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
Increase VDDCORE voltage to prevent memory access errors.
According to the Amlogic recommendation, set VDDCORE voltage to 0.84V.
Details from Amlogic FAE:
```
This is related to the manufacturing process (Please search for corner
chip, TT/FF/SS).
We do not distinguish TT/FF/SS chips in A1. The operating voltage of the
chip will vary depending on the manufacturing process.
In this case, I guess these are SS chip which are just slightly lower
than their operating voltage, causing this problem.
Therefore, we recommend that customers set the voltage to 0.84. This
voltage has been verified by most customers and can work normally when
the DSP is also turned on.
```
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
The Amlogic A1 SoC family utilizes static operating points and a
PWM-controlled core voltage regulator, which is specific to the board.
As the main CPU clock input, the SoC uses CLKID_CPU_CLK from the CPU
clock controller, which can be inherited from the system PLL (syspll) or
a fixed CPU clock.
Currently, the stable operating points at all frequencies are set to
800mV. This value is obtained from the vendor setup of several A1
boards.
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
The 'sys_pll' input is an optional clock that can be used to generate
'sys_pll_div16', which serves as one of the sources for the GEN clock.
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
The Amlogic A1 SoC family relies on the CPU clock controller to generate
CPU clocks, serving a crucial function. It has 4 inputs: main
oscillator, fixed clocks and system pll.
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
Input clock 'syspll_in' is needed for the 'sys_pll' clock and is
inherited from the Peripherals Clock Controller.
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
Fixes: d0e3e0eeeff9 ("arm64: dts: ad402: enable audio")
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
Fixes: d0e3e0eeeff9 ("arm64: dts: ad402: enable audio")
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
After internal discussion we have made decision to initialize ALSA model
with board name in the uppercase.
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
* playback to speaker
- setup:
$ amixer set "FRDDR_A SINK 1 SEL" "OUT 0"
$ amixer set "FRDDR_A SRC 1 EN" "on"
$ amixer set "TDMOUT_A SRC SEL" "IN 0"
$ amixer set "TOACODEC Source" "I2S A"
$ amixer set "TOACODEC Lane Select" "0"
$ amixer set "TOACODEC EN" "on"
$ amixer set "ACODEC" "70%"
$ amixer set "ACODEC Playback Channel Mode" "Mono"
$ amixer set "ACODEC Right+ Driver Sel" "Right DAC"
$ amixer set "ACODEC Left+ Driver Sel" "Right DAC Inverted"
- usage:
$ aplay -D hw:0,0 -f S16_LE -r 48000 /path/to/sample.wav
* capture from digital mics
- setup:
$ amixer set "TODDR_A SRC SEL" "IN 4"
- usage:
$ arecord -D hw:0,1 -f S32_LE -r 48000 -c 2 -t wav /path/to/sample.wav
* capture from analog mics
- setup:
$ amixer set "TDMIN_A SRC SEL" "IN 3"
$ amixer set "TODDR_B SRC SEL" "IN 0"
$ amixer set "TOACODEC Source" "I2S A"
$ amixer set "TOACODEC Lane Select" "0"
$ amixer set "TOACODEC EN" "on"
$ amixer set "ACODEC ADC" "70%"
$ amixer set "ACODEC ADC Filter" "on"
$ amixer set "ACODEC ADC Filter Mode" "HiFi"
$ amixer set "ACODEC ADC Mic Bias" "on"
$ amixer set "ACODEC ADC Mic Bias Level" "2.5V"
$ amixer set "ACODEC ADC PGA" "50%"
$ amixer set "ACODEC ADC PGA Right Sel" "Differential"
$ amixer set "ACODEC ADC PGA Left Sel" "Differential"
- usage:
$ arecord -D hw:0,2 -f S16_LE -r 48000 -c 2 -t wav /path/to/sample.wav
* capture from TDM loopback
- setup:
$ amixer set "TDMIN_LB SRC SEL" "IN 0"
$ amixer set "TODDR_B SRC SEL" "IN 6"
- usage:
$ arecord -D hw:0,2 -f S16_LE -r 48000 -c 2 -t wav /path/to/sample.wav
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
This commit adds the declarartion of currently supported audio devices
and their pins found Amlogic A1 SoC family. SPDIF declaration is missing
here becase there are no publicly available boards with it.
Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com>
Signed-off-by: Dmitry Rokosov <rockosov@rulkc.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MCE fix from Ingo Molnar:
"Fix incorrect hardware errors reported on Zen3 CPUs, such as bogus
L3 cache deferred errors (Yazen Ghannam)"
* tag 'ras-urgent-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/amd: Filter bogus hardware errors on Zen3 clients
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Four Intel uncore PMU driver fixes by Zide Chen"
* tag 'perf-urgent-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Remove extra double quote mark
perf/x86/intel/uncore: Fix die ID init and look up bugs
perf/x86/intel/uncore: Skip discovery table for offline dies
perf/x86/intel/uncore: Fix iounmap() leak on global_init failure
|
|
Pull kvm fixes from Paolo Bonzini:
"s390:
- vsie: Fix races with partial gmap invalidations
x86:
- Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: vsie: Fix races with partial gmap invalidations
KVM: x86: Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: One very last second fix
Fix one more gmap-rewrite issue: races with partial gmap invalidations.
|
|
KVM x86 fixes for 7.1
Declare flexible arrays in uAPI structures using __DECLARE_FLEX_ARRAY() so
that KVM's uAPI headers can be included in C++ projects.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Before v7.0 is released, fix a few issues with the CFI patchset,
merged earlier in v7.0-rc, that primarily affect interfaces to
non-kernel code:
- Improve the prctl() interface for per-task indirect branch landing
pad control to expand abbreviations and to resemble the speculation
control prctl() interface
- Expand the "LP" and "SS" abbreviations in the ptrace uapi header
file to "branch landing pad" and "shadow stack", to improve
readability
- Fix a typo in a CFI-related macro name in the ptrace uapi header
file
- Ensure that the indirect branch tracking state and shadow stack
state are unlocked immediately after an exec() on the new task so
that libc subsequently can control it
- While working in this area, clean up the kernel-internal,
cross-architecture prctl() function names by expanding the
abbreviations mentioned above"
* tag 'riscv-for-linus-v7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
prctl: cfi: change the branch landing pad prctl()s to be more descriptive
riscv: ptrace: cfi: expand "SS" references to "shadow stack" in uapi headers
prctl: rename branch landing pad implementation functions to be more explicit
riscv: ptrace: expand "LP" references to "branch landing pads" in uapi headers
riscv: cfi: clear CFI lock status in start_thread()
riscv: ptrace: cfi: fix "PRACE" typo in uapi header
|
|
김영민 reports that shstk_pop_sigframe() doesn't check for errors from
mmap_read_lock_killable(), which is a silly oversight, and also shows
that we haven't marked those functions with "__must_check", which would
have immediately caught it.
So let's fix both issues.
Reported-by: 김영민 <osori@hspace.io>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Introduce a new boolean flag, used for shadow gmaps, to keep track of
whether the gmap has been invalidated, either partially or totally.
Use the new flag to check whether shadow gmap invalidations happened
during shadowing. In such cases, abort whatever was going on, return
-EAGAIN and let the caller try again.
Fixes: 19d6c5b80443 ("KVM: s390: vsie: Fix unshadowing while shadowing")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260407161721.247044-1-imbrenda@linux.ibm.com>
|
|
The third argument in INTEL_UNCORE_FR_EVENT_DESC() is subject to
__stringify(), and the extra double quote marks can result in the
expansion "3.814697266e-6" in the sysfs knobs, instead of
3.814697266e-6.
This is incorrect, though it may still work for perf, e.g.
perf stat -e uncore_iio_free_running_0/bw_in_port0/
Fixes: d8987048f665 ("perf/x86/intel/uncore: Support IIO free-running counters on DMR")
Closes: https://lore.kernel.org/all/20251231224233.113839-1-zide.chen@intel.com/
Reported-by: Chun-Tse Shao <ctshao@google.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20260313174050.171704-5-zide.chen@intel.com
|
|
In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path,
uncore_device_to_die() may return -1 when all CPUs associated
with the UBOX device are offline.
Remove the WARN_ON_ONCE(die_id == -1) check for two reasons:
- The current code breaks out of the loop. This is incorrect because
pci_get_device() does not guarantee iteration in domain or bus order,
so additional UBOX devices may be skipped during the scan.
- Returning -EINVAL is incorrect, since marking offline buses with
die_id == -1 is expected and should not be treated as an error.
Separately, when NUMA is disabled on a NUMA-capable platform,
pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die()
to return -1 for all PCI devices. As a result,
spr_update_device_location(), used on Intel SPR and EMR, ignores the
corresponding PMON units and does not add them to the RB tree.
Fix this by using uncore_pcibus_to_dieid(), which retrieves topology
from the UBOX GIDNIDMAP register and works regardless of whether NUMA
is enabled in Linux. This requires snbep_pci2phy_map_init() to be
added in spr_uncore_pci_init().
Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where
NUMA is expected to be enabled.
Fixes: 9a7832ce3d92 ("perf/x86/intel/uncore: With > 8 nodes, get pci bus die id from NUMA info")
Fixes: 65248a9a9ee1 ("perf/x86/uncore: Add a quirk for UPI on SPR")
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://patch.msgid.link/20260313174050.171704-4-zide.chen@intel.com
|
|
This warning can be triggered if NUMA is disabled and the system
boots with fewer CPUs than the number of CPUs in die 0.
WARNING: CPU: 9 PID: 7257 at uncore.c:1157 uncore_pci_pmu_register+0x136/0x160 [intel_uncore]
Currently, the discovery table continues to be parsed even if all CPUs
in the associated die are offline. This can lead to an array overflow
at "pmu->boxes[die] = box" in uncore_pci_pmu_register(), which may
trigger the warning above or cause other issues.
Fixes: edae1f06c2cd ("perf/x86/intel/uncore: Parse uncore discovery tables")
Reported-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://patch.msgid.link/20260313174050.171704-3-zide.chen@intel.com
|
|
Kernel test robot reported:
Unverified Error/Warning (likely false positive, kindly check if
interested):
arch/x86/events/intel/uncore_discovery.c:293:2-8:
ERROR: missing iounmap; ioremap on line 288 and execution via
conditional on line 292
If domain->global_init() fails in __parse_discovery_table(), the
ioremap'ed MMIO region is not released before returning, resulting
in an MMIO mapping leak.
Fixes: b575fc0e3357 ("perf/x86/intel/uncore: Add domain global init callback")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20260313174050.171704-2-zide.chen@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The largest part here are devicetree fixes for Qualcomm, and NXP i.MX,
addressing a few regressions and incorrect settings in board and SoC
pecific dts files.
The largest single commits are a revert of a cleanup patch for i.MX
that caused regressions for the NAND flash controller and a fixup for
an incomplete cleanup of the PCIe controller on Qualcomm platforms
that broke because the state was left incompatible with both the old
and new behavior.
On the Rockchips, Hisilicon, Renesas, Allwinner and AT91 platforms,
only a single simple dts bugfix each was added since the last round of
fixes.
On the SoC specific device drivers, everything is relatively harmless:
three reset controller driver fixes, a compatibility for fix ASpeed
soc ID, and error handling fixes for Qualcomm and Microchip. One
regression fix on Qualcomm addresses a problem with a previous fix for
DisplayPort alt mode"
* tag 'soc-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
arm64: dts: qcom: hamoa: Fix incomplete Root Port property migration
dt-bindings: display/msm: qcm2290-mdss: Fix missing ranges in example
firmware: microchip: fail auto-update probe if no flash found
arm64: dts: renesas: sparrow-hawk: Reserve first 128 MiB of DRAM
arm64: dts: qcom: agatti: Fix IOMMU DT properties
dt-bindings: media: venus: Fix iommus property
dt-bindings: display: msm: qcm2290-mdss: Fix iommus property
arm64: dts: allwinner: sun55i: Fix r-spi DMA
reset: spacemit: k3: Decouple composite reset lines
reset: gpio: fix double free in reset_add_gpio_aux_device() error path
ARM: dts: microchip: sam9x7: fix gpio-lines count for pioB
arm64: dts: hisilicon: hi3798cv200: Add missing dma-ranges
arm64: dts: hisilicon: poplar: Correct PCIe reset GPIO polarity
reset: rzg2l-usbphy-ctrl: Fix malformed MODULE_AUTHOR string
soc: microchip: mpfs-mss-top-sysreg: Fix resource leak on driver unbind
soc: microchip: mpfs-control-scb: Fix resource leak on driver unbind
soc: qcom: pmic_glink_altmode: Fix TBT->SAFE->!TBT transition
arm64: dts: qcom: monaco: Reserve full Gunyah metadata region
arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage up to 0.85V
Revert "arm64: dts: imx8mq-librem5: Set the DVS voltages lower"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules,
similar to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
* tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
ACPI: RIMT: Add dependency between iommu and devices
selftests: riscv: Add braces around EXPECT_EQ()
riscv: use _BITUL macro rather than BIT() in ptrace uapi and kselftests
riscv: Reset pmm when PR_TAGGED_ADDR_ENABLE is not set
riscv: make runtime const not usable by modules
riscv: patch: Avoid early phys_to_page()
riscv: kgdb: fix several debug register assignment bugs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix kexec crash on KCOV-instrumented kernels (Aleksandr Nogikh)
- Fix Geode platform driver on-stack property data use-after-return
bug (Dmitry Torokhov)
* tag 'x86-urgent-2026-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/geode: Fix on-stack property data use-after-return bug
x86/kexec: Disable KCOV instrumentation after load_segments()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Ingo Molnar:
- Fix potential bad container_of() in intel_pmu_hw_config() (Ian
Rogers)
* tag 'perf-urgent-2026-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix potential bad container_of in intel_pmu_hw_config
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix TLB uniquification for systems with TLB not initialised by
firmware
- Fix allocation in TLB uniquification
- Fix SiByte cache initialisation
- Check uart parameters from firmware on Loongson64 systems
- Fix clock id mismatch for Ralink SoCs
- Fix GCC version check for __mutli3 workaround
* tag 'mips-fixes_7.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: mm: Allocate tlb_vpn array atomically
MIPS: mm: Rewrite TLB uniquification for the hidden bit feature
MIPS: mm: Suppress TLB uniquification on EHINV hardware
MIPS: Always record SEGBITS in cpu_data.vmbits
MIPS: Fix the GCC version check for `__multi3' workaround
MIPS: SiByte: Bring back cache initialisation
mips: ralink: update CPU clock index
MIPS: Loongson64: env: Check UARTs passed by LEFI cautiously
|
|
Users have been observing multiple L3 cache deferred errors after recent
kernel rework of deferred error handling.¹ ⁴
The errors are bogus due to inconsistent status values. Also, user verified
that bogus MCA_DESTAT values are present on the system even with an older
kernel.²
The errors seem to be garbage values present in the MCA_DESTAT of some L3
cache banks. These were implicitly ignored before the recent kernel rework
because these do not generate a deferred error interrupt.
A later revision of the rework patch was merged for v6.19. This naturally
filtered out most of the bogus error logs. However, a few signatures still
remain.³
Minimize the scope of the filter to the reported CPU
family/model/stepping and only for errors which don't have the Enabled
bit in the MCi status MSR.
¹ https://lore.kernel.org/20250915010010.3547-1-spasswolf@web.de
² https://lore.kernel.org/6e1eda7dd55f6fa30405edf7b0f75695cf55b237.camel@web.de
³ https://lore.kernel.org/21ba47fa8893b33b94370c2a42e5084cf0d2e975.camel@web.de
⁴ https://lore.kernel.org/r/CAKFB093B2k3sKsGJ_QNX1jVQsaXVFyy=wNwpzCGLOXa_vSDwXw@mail.gmail.com
[ bp: Generalize the condition according to which errors are bogus. ]
Fixes: 7cb735d7c0cb ("x86/mce: Unify AMD DFR handler with MCA Polling")
Closes: https://lore.kernel.org/20250915010010.3547-1-spasswolf@web.de
Reported-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-By: Bert Karwatzki <spasswolf@web.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250915010010.3547-1-spasswolf@web.de
|
|
Per Linus' comments requesting the replacement of "INDIR_BR_LP" in the
indirect branch tracking prctl()s with something more readable, and
suggesting the use of the speculation control prctl()s as an exemplar,
reimplement the prctl()s and related constants that control per-task
forward-edge control flow integrity.
This primarily involves two changes. First, the prctls are
restructured to resemble the style of the speculative execution
workaround control prctls PR_{GET,SET}_SPECULATION_CTRL, to make them
easier to extend in the future. Second, the "indir_br_lp" abbrevation
is expanded to "branch_landing_pads" to be less telegraphic. The
kselftest and documentation is adjusted accordingly.
Link: https://lore.kernel.org/linux-riscv/CAHk-=whhSLGZAx3N5jJpb4GLFDqH_QvS07D+6BnkPWmCEzTAgw@mail.gmail.com/
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Similar to the recent change to expand "LP" to "branch landing pad",
let's expand "SS" in the ptrace uapi macros to "shadow stack" as well.
This aligns with the existing prctl() arguments, which use the
expanded "shadow stack" names, rather than just the abbreviation.
Link: https://lore.kernel.org/linux-riscv/CAHk-=whhSLGZAx3N5jJpb4GLFDqH_QvS07D+6BnkPWmCEzTAgw@mail.gmail.com/
Cc: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Per Linus' comments about the unreadability of abbreviations such as
"indir_br_lp", rename the three prctl() implementation functions to be more
explicit. This involves renaming "indir_br_lp_status" in the function
names to "branch_landing_pad_state".
While here, add _prctl_ into the function names, following the
speculation control prctl implementation functions.
Link: https://lore.kernel.org/linux-riscv/CAHk-=whhSLGZAx3N5jJpb4GLFDqH_QvS07D+6BnkPWmCEzTAgw@mail.gmail.com/
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Per Linus' comments about the unreadability of abbreviations such as
"LP", rename the RISC-V ptrace landing pad CFI macro names to be more
explicit. This primarily involves expanding "LP" in the names to some
variant of "branch landing pad."
Link: https://lore.kernel.org/linux-riscv/CAHk-=whhSLGZAx3N5jJpb4GLFDqH_QvS07D+6BnkPWmCEzTAgw@mail.gmail.com/
Cc: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
When libc locks the CFI status through the following prctl:
- PR_LOCK_SHADOW_STACK_STATUS
- PR_LOCK_INDIR_BR_LP_STATUS
A newly execd address space will inherit the lock status
if it does not clear the lock bits. Since the lock bits
remain set, libc will later fail to enable the landing
pad and shadow stack.
Signed-off-by: Zong Li <zong.li@sifive.com>
Link: https://patch.msgid.link/20260323065640.4045713-1-zong.li@sifive.com
[pjw@kernel.org: ensure we unlock before changing state; cleaned up subject line]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
A CFI-related macro defined in arch/riscv/uapi/asm/ptrace.h misspells
"PTRACE" as "PRACE"; fix this.
Fixes: 2af7c9cf021c ("riscv/ptrace: expose riscv CFI status and state via ptrace and in core files")
Cc: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Fix the build of non-kernel code that includes the RISC-V ptrace uapi
header, and the RISC-V validate_v_ptrace.c kselftest, by using the
_BITUL() macro rather than BIT(). BIT() is not available outside
the kernel.
Based on patches and comments from Charlie Jenkins, Michael Neuling,
and Andreas Schwab.
Fixes: 30eb191c895b ("selftests: riscv: verify ptrace rejects invalid vector csr inputs")
Fixes: 2af7c9cf021c ("riscv/ptrace: expose riscv CFI status and state via ptrace and in core files")
Cc: Andreas Schwab <schwab@suse.de>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Charlie Jenkins <thecharlesjenkins@gmail.com>
Link: https://patch.msgid.link/20260330024248.449292-1-mikey@neuling.org
Link: https://lore.kernel.org/linux-riscv/20260309-fix_selftests-v2-1-9d5a553a531e@gmail.com/
Link: https://lore.kernel.org/linux-riscv/20260309-fix_selftests-v2-3-9d5a553a531e@gmail.com/
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
In set_tagged_addr_ctrl(), when PR_TAGGED_ADDR_ENABLE is not set, pmlen
is correctly set to 0, but it forgets to reset pmm. This results in the
CPU pmm state not corresponding to the software pmlen state.
Fix this by resetting pmm along with pmlen.
Fixes: 2e1743085887 ("riscv: Add support for the tagged address ABI")
Signed-off-by: Zishun Yi <vulab@iscas.ac.cn>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://patch.msgid.link/20260322160022.21908-1-vulab@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Similar as commit 284922f4c563 ("x86: uaccess: don't use runtime-const
rewriting in modules") does, make riscv's runtime const not usable by
modules too, to "make sure this doesn't get forgotten the next time
somebody wants to do runtime constant optimizations". The reason is
well explained in the above commit: "The runtime-const infrastructure
was never designed to handle the modular case, because the constant
fixup is only done at boot time for core kernel code."
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260221023731.3476-1-jszhang@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Similarly to commit 8d09e2d569f6 ("arm64: patching: avoid early
page_to_phys()"), avoid using phys_to_page() for the kernel address case
in patch_map().
Since this is called from apply_boot_alternatives() in setup_arch(), and
commit 4267739cabb8 ("arch, mm: consolidate initialization of SPARSE
memory model") has moved sparse_init() to after setup_arch(),
phys_to_page() is not available there yet, and it panics on boot with
SPARSEMEM on RV32, which does not use SPARSEMEM_VMEMMAP.
Reported-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Closes: https://lore.kernel.org/r/20260223144108-dcace0b9-02e8-4b67-a7ce-f263bed36f26@linutronix.de/
Fixes: 4267739cabb8 ("arch, mm: consolidate initialization of SPARSE memory model")
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20260310-riscv-sparsemem-alternatives-fix-v1-1-659d5dd257e2@iscas.ac.cn
[pjw@kernel.org: fix the subject line to align with the patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Fix several bugs in the RISC-V kgdb implementation:
- The element of dbg_reg_def[] that is supposed to pertain to the S1
register embeds instead the struct pt_regs offset of the A1
register. Fix this to use the S1 register offset in struct pt_regs.
- The sleeping_thread_to_gdb_regs() function copies the value of the
S10 register into the gdb_regs[] array element meant for the S9
register, and copies the value of the S11 register into the array
element meant for the S10 register. It also neglects to copy the
value of the S11 register. Fix all of these issues.
Fixes: fe89bd2be8667 ("riscv: Add KGDB support")
Cc: Vincent Chen <vincent.chen@sifive.com>
Link: https://patch.msgid.link/fde376f8-bcfd-bfe4-e467-07d8f7608d05@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
Microchip AT91 fixes for v7.0
This update includes:
- fix gpio-lines for SAM9X7 PIOB GPIO controller
* tag 'at91-fixes-7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sam9x7: fix gpio-lines count for pioB
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Madhavan Srinivasan:
- fix iommu incorrectly bypassing DMA APIs
Thanks to Dan Horak, Gaurav Batra, and Ritesh Harjani (IBM).
* tag 'powerpc-7.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv/iommu: iommu incorrectly bypass DMA APIs
|
