Merge branch 'v7.3-armsoc/dts64' into for-next

4 files changed, 958 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 51a1417d96ec..9c9299d6d205 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -71,6 +71,13 @@ properties:
           - const: ariaboard,photonicat
           - const: rockchip,rk3568
 
+      - description: ArmSoM CM5 Module based boards
+        items:
+          - enum:
+              - armsom,cm5-io
+          - const: armsom,cm5
+          - const: rockchip,rk3576
+
       - description: ArmSoM Sige1 board
         items:
           - const: armsom,sige1
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 390f41736488..7e745f890187 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -167,6 +167,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-100ask-dshanpi-a1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-cm5-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-cm5-io.dts b/arch/arm64/boot/dts/rockchip/rk3576-armsom-cm5-io.dts
new file mode 100644
index 000000000000..ebb231271e45
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-cm5-io.dts
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * ArmSoM CM5-IO - official carrier board for the ArmSoM CM5 (RK3576) module.
+ *
+ * Carrier provides:
+ *   - Full-size HDMI 2.1 (HDMI TX via HDPTX PHY)
+ *   - Gigabit Ethernet RJ45 (GMAC0 + on-module YT8531)
+ *   - 2x USB-A behind a USB3 hub (combphy1 + u2phy1)
+ *   - USB-C with PD/altmode (FUSB302 on i2c0, combphy0 + USBDP PHY)
+ *   - M.2 PCIe 2.0 x1 slot (combphy0 as PCIe lane)
+ *   - microSD card slot
+ *   - Green/red status LEDs, 40-pin RPi-compatible header
+ *   - 12 V DC barrel jack
+ *
+ * Copyright (c) 2024 ArmSoM
+ * Copyright (c) 2026 Jiaxing Hu <gahing@gahingwoo.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3576-armsom-cm5.dtsi"
+
+/ {
+	model = "ArmSoM CM5-IO";
+	compatible = "armsom,cm5-io", "armsom,cm5", "rockchip,rk3576";
+
+	aliases {
+		ethernet0 = &gmac0;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led_green: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_green_en>;
+		};
+
+		led_red: led-1 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_FAULT;
+			gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_red_en>;
+		};
+	};
+
+	vcc_12v0_dcin: regulator-vcc-12v0-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_12v0_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* PCIe 3.3 V for the M.2 slot */
+	vcc_3v3_pcie: regulator-vcc-3v3-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc_3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_5v0_device: regulator-vcc-5v0-device {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0_device";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_12v0_dcin>;
+	};
+
+	vcc_5v0_sys: regulator-vcc-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_12v0_dcin>;
+	};
+
+	vcc_5v0_typec0: regulator-vcc-5v0-typec0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg0_pwren>;
+		regulator-name = "vcc_5v0_typec0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v0_device>;
+	};
+
+	/* USB-A host 5 V (through the hub) */
+	vcc_5v0_usbhost: regulator-vcc-5v0-usbhost {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+		regulator-name = "vcc_5v0_usbhost";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v0_device>;
+	};
+};
+
+/* ComboPHY0 -> PCIe lane (M.2 slot); ComboPHY1 -> USB3 lane (USB-A hub). */
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_psu {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m1_xfer>;
+	status = "okay";
+
+	usbc0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
+		vbus-supply = <&vcc_5v0_typec0>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			try-power-role = "sink";
+			sink-pdos =
+				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				 PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
+				 PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			altmodes {
+				displayport {
+					svid = /bits/ 16 <0xff01>;
+					vdo = <0xffffffff>;
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdp_phy_orientation_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&usb_drd0_role_switch>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					dp_altmode_mux: endpoint {
+						remote-endpoint = <&usbdp_phy_dp_altmode_mux>;
+					};
+				};
+			};
+		};
+	};
+};
+
+/* PCIe 2.0 x1 M.2 slot + */
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset>;
+	reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		led_green_en: led-green-en {
+			rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_red_en: led-red-en {
+			rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		pcie_reset: pcie-reset {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_otg0_pwren: usb-otg0-pwren {
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbc0_int: usbc0-int {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+/* SAI6 is the I2S CPU DAI feeding the HDMI audio path. */
+&sai6 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc_5v0_typec0>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc_5v0_usbhost>;
+	status = "okay";
+};
+
+/* Debug UART0 on the 40-pin header. */
+&uart0 {
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
+
+/* USB DRD0: USB-C (USBDP SuperSpeed + USB2 HS), OTG with FUSB302 */
+&usb_drd0_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb_drd0_role_switch: endpoint {
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+/* USB DRD1: USB-A ports behind the hub */
+&usb_drd1_dwc3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdp_phy {
+	status = "okay";
+	mode-switch;
+	orientation-switch;
+	sbu1-dc-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy_orientation_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+
+		usbdp_phy_dp_altmode_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dp_altmode_mux>;
+		};
+	};
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3576-armsom-cm5.dtsi
new file mode 100644
index 000000000000..71ea11e1f8ce
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-cm5.dtsi
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * ArmSoM CM5 - Rockchip RK3576 compute module (Raspberry Pi CM4 form factor).
+ *
+ * Common to all CM5 carriers. The carrier .dts includes this file, sets the
+ * board model/compatible, and adds carrier-specific peripherals.
+ *
+ * On-module devices:
+ *   - RK806 PMIC on I2C1
+ *   - HYM8563 RTC on I2C2
+ *   - eMMC (SDHCI)
+ *   - GMAC0 + MotorComm YT8531 Gigabit Ethernet PHY (RGMII)
+ *   - SYN43752 WiFi 6 + BT 5.x (SDIO + UART4)
+ *
+ * Copyright (c) 2024 ArmSoM
+ * Copyright (c) 2026 Jiaxing Hu <gahing@gahingwoo.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3576.dtsi"
+
+/ {
+	compatible = "armsom,cm5", "rockchip,rk3576";
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_1v2_ufs_vccq_s0: regulator-vcc-1v2-ufs-vccq-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v2_ufs_vccq_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_1v8_s0: regulator-vcc-1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc_1v8_ufs_vccq2_s0: regulator-vcc-1v8-ufs-vccq2-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8_ufs_vccq2_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v0_pldo_s3";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <2000000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_3v3_s0: regulator-vcc-3v3-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_ufs_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	/*
+	 * WiFi power sequencer for SYN43752. Reset GPIO1 PC6 active-low,
+	 * clock from the HYM8563 RTC oscillator.
+	 */
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on>;
+		reset-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+/*
+ * GMAC0 drives an on-module MotorComm YT8531. The PHY has no local crystal and
+ * takes the SoC 25 MHz reference (REFCLKO25M_GMAC0_OUT); ethm0_clk0_25m_out
+ * routes that clock to the pad, and the PHY node consumes and enables it.
+ */
+&gmac0 {
+	phy-mode = "rgmii-id";
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-supply = <&vcc_3v3_s3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth0m0_miim
+		     &eth0m0_tx_bus2
+		     &eth0m0_rx_bus2
+		     &eth0m0_rgmii_clk
+		     &eth0m0_rgmii_bus
+		     &ethm0_clk0_25m_out>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic@23 {
+		compatible = "rockchip,rk806";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		system-power-controller;
+		vcc1-supply = <&vcc_5v0_sys>;
+		vcc2-supply = <&vcc_5v0_sys>;
+		vcc3-supply = <&vcc_5v0_sys>;
+		vcc4-supply = <&vcc_5v0_sys>;
+		vcc5-supply = <&vcc_5v0_sys>;
+		vcc6-supply = <&vcc_5v0_sys>;
+		vcc7-supply = <&vcc_5v0_sys>;
+		vcc8-supply = <&vcc_5v0_sys>;
+		vcc9-supply = <&vcc_5v0_sys>;
+		vcc10-supply = <&vcc_5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc_5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc_5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_cpu_big_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_big_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_npu_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_gpu_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-name = "vdd_logic_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo2_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v75_hdmi_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <837500>;
+				regulator-max-microvolt = <837500>;
+				regulator-name = "vdda0v75_hdmi_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+/* I2C2: HYM8563 RTC @ 0x51 (interrupt on GPIO0 PA0). */
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+/*
+ * The PHY reset has to be described at the MDIO bus level: mdiobus releases a
+ * bus level reset before it scans for PHY IDs, whereas the per-PHY reset-gpios
+ * is only applied by phylib once the PHY has already been found, which never
+ * happens while the YT8531 is still held in reset.
+ *
+ * The compatible names the YT8531 explicitly so phylib instantiates the PHY
+ * from the device tree without an MDIO ID probe; the crystal-less PHY does not
+ * answer on MDIO until its driver has enabled the reference clock below.
+ */
+&mdio0 {
+	reset-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <20000>;
+	reset-post-delay-us = <100000>;
+
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-id4f51.e91b";
+		reg = <0x1>;
+		clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+	};
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8_s0>;
+	status = "okay";
+};
+
+/* eMMC: on-module, HS400 200 MHz with enhanced strobe. */
+&sdhci {
+	bus-width = <8>;
+	full-pwr-cycle-in-suspend;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	/delete-property/ supports-cqe;
+	status = "okay";
+};
+
+/* SDIO: SYN43752 WiFi, power-sequenced by sdio_pwrseq, clock from HYM8563. */
+&sdio {
+	bus-width = <4>;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-sd;
+	no-mmc;
+	non-removable;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	wakeup-source;
+	status = "okay";
+};
+
+/* UART4: Bluetooth (SYN43752). */
+&uart4 {
+	pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wireless-wlan {
+		/* GPIO1 PC6 - WiFi power enable / reset (sdio_pwrseq) */
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};