summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/boot/dts/ti/omap/am335x-icev2-prueth-overlay.dtso136
-rw-r--r--arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi2
-rw-r--r--arch/arm/boot/dts/ti/omap/dm8148-evm.dts4
-rw-r--r--arch/arm/boot/dts/ti/omap/dm816x-clocks.dtsi2
-rw-r--r--arch/arm/boot/dts/ti/omap/dra7-l4.dtsi2
-rw-r--r--arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi10
-rw-r--r--arch/arm/boot/dts/ti/omap/omap3-cm-t3x30.dtsi2
-rw-r--r--arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi2
-rw-r--r--arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd35.dtsi2
-rw-r--r--arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd43.dtsi2
10 files changed, 82 insertions, 82 deletions
diff --git a/arch/arm/boot/dts/ti/omap/am335x-icev2-prueth-overlay.dtso b/arch/arm/boot/dts/ti/omap/am335x-icev2-prueth-overlay.dtso
index ffed1f3d046a..c0f32c889f69 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-icev2-prueth-overlay.dtso
+++ b/arch/arm/boot/dts/ti/omap/am335x-icev2-prueth-overlay.dtso
@@ -19,61 +19,61 @@
#include <dt-bindings/clock/am3.h>
&{/} {
- /* Dual-MAC Ethernet application node on PRU-ICSS */
- pruss_eth: pruss-eth {
- compatible = "ti,am3359-prueth";
- ti,prus = <&pru0>, <&pru1>;
- sram = <&ocmcram>;
- ti,mii-rt = <&pruss_mii_rt>;
- ti,iep = <&pruss_iep>;
- ti,ecap = <&pruss_ecap>;
- interrupts = <20 2 2>, <21 3 3>;
- interrupt-names = "rx_hp", "rx_lp";
- interrupt-parent = <&pruss_intc>;
-
- pinctrl-0 = <&pruss_eth_default>;
- pinctrl-names = "default";
-
- ethernet-ports {
- #address-cells = <1>;
- #size-cells = <0>;
- pruss_emac0: ethernet-port@0 {
- reg = <0>;
- phy-handle = <&pruss_eth0_phy>;
- phy-mode = "mii";
- interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
- interrupt-names = "rx", "emac_ptp_tx",
- "hsr_ptp_tx";
- /* Filled in by bootloader */
- local-mac-address = [00 00 00 00 00 00];
- };
-
- pruss_emac1: ethernet-port@1 {
- reg = <1>;
- phy-handle = <&pruss_eth1_phy>;
- phy-mode = "mii";
- interrupts = <21 3 3>, <27 9 7>, <24 9 7>;
- interrupt-names = "rx", "emac_ptp_tx",
- "hsr_ptp_tx";
- /* Filled in by bootloader */
- local-mac-address = [00 00 00 00 00 00];
- };
- };
- };
+ /* Dual-MAC Ethernet application node on PRU-ICSS */
+ pruss_eth: pruss-eth {
+ compatible = "ti,am3359-prueth";
+ ti,prus = <&pru0>, <&pru1>;
+ sram = <&ocmcram>;
+ ti,mii-rt = <&pruss_mii_rt>;
+ ti,iep = <&pruss_iep>;
+ ti,ecap = <&pruss_ecap>;
+ interrupts = <20 2 2>, <21 3 3>;
+ interrupt-names = "rx_hp", "rx_lp";
+ interrupt-parent = <&pruss_intc>;
+
+ pinctrl-0 = <&pruss_eth_default>;
+ pinctrl-names = "default";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pruss_emac0: ethernet-port@0 {
+ reg = <0>;
+ phy-handle = <&pruss_eth0_phy>;
+ phy-mode = "mii";
+ interrupts = <20 2 2>, <26 6 6>, <23 6 6>;
+ interrupt-names = "rx", "emac_ptp_tx",
+ "hsr_ptp_tx";
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ pruss_emac1: ethernet-port@1 {
+ reg = <1>;
+ phy-handle = <&pruss_eth1_phy>;
+ phy-mode = "mii";
+ interrupts = <21 3 3>, <27 9 7>, <24 9 7>;
+ interrupt-names = "rx", "emac_ptp_tx",
+ "hsr_ptp_tx";
+ /* Filled in by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
};
&am33xx_pinmux {
/* MDIO node for PRU-ICSS */
- pruss_mdio_default: pruss-mdio-default-pins {
- pinctrl-single,pins = <
+ pruss_mdio_default: pruss-mdio-default-pins {
+ pinctrl-single,pins = <
AM33XX_IOPAD(0x88c, PIN_OUTPUT | MUX_MODE5) /* (V12) gpmc_clk.pr1_mdio_mdclk */
AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE5) /* (T13) gpmc_csn3.pr1_mdio_data */
- >;
- };
+ >;
+ };
/* Pinmux configuration for PRU-ICSS */
- pruss_eth_default: pruss-eth-default-pins {
- pinctrl-single,pins = <
+ pruss_eth_default: pruss-eth-default-pins {
+ pinctrl-single,pins = <
AM33XX_IOPAD(0x8a0, PIN_INPUT | MUX_MODE2) /* (R1) lcd_data0.pr1_mii_mt0_clk */
AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE2) /* (T2) lcd_data5.pr1_mii0_txd0 */
AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE2) /* (T1) lcd_data4.pr1_mii0_txd1 */
@@ -105,14 +105,14 @@
AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE5) /* (V17) gpmc_a11.pr1_mii1_rxer */
AM33XX_IOPAD(0x878, PIN_INPUT | MUX_MODE5) /* (U18) gpmc_be1n.pr1_mii1_rxlink */
AM33XX_IOPAD(0x8ec, PIN_INPUT | MUX_MODE2) /* (R6) lcd_ac_bias_en.pr1_mii1_crs */
- >;
- };
+ >;
+ };
};
&gpio3 {
- mux-mii-hog {
+ mux-mii-hog {
status = "disabled";
- };
+ };
mux-mii-hog-0 {
gpio-hog;
@@ -129,28 +129,28 @@
* conflict with PRU-ICSS
*/
&mac_sw {
- status = "disabled";
+ status = "disabled";
};
&davinci_mdio_sw {
- status = "disabled";
+ status = "disabled";
};
/* PRU-ICSS MDIO configuration */
&pruss_mdio {
- pinctrl-0 = <&pruss_mdio_default>;
- pinctrl-names = "default";
- reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
- reset-delay-us = <2>; /* PHY datasheet states 1uS min */
- status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- pruss_eth0_phy: ethernet-phy@1 {
- reg = <1>;
- };
-
- pruss_eth1_phy: ethernet-phy@3 {
- reg = <3>;
- };
+ pinctrl-0 = <&pruss_mdio_default>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <2>; /* PHY datasheet states 1uS min */
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pruss_eth0_phy: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ pruss_eth1_phy: ethernet-phy@3 {
+ reg = <3>;
+ };
};
diff --git a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
index 8a693c478bea..57a45609f9f5 100644
--- a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
@@ -1870,7 +1870,7 @@
gpio2: gpio@0 {
compatible = "ti,omap4-gpio";
- gpio-ranges = <&am33xx_pinmux 0 34 18>,
+ gpio-ranges = <&am33xx_pinmux 0 34 18>,
<&am33xx_pinmux 18 77 4>,
<&am33xx_pinmux 22 56 10>;
gpio-controller;
diff --git a/arch/arm/boot/dts/ti/omap/dm8148-evm.dts b/arch/arm/boot/dts/ti/omap/dm8148-evm.dts
index 57a9eef09f6f..8236d9eb438a 100644
--- a/arch/arm/boot/dts/ti/omap/dm8148-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dm8148-evm.dts
@@ -99,7 +99,7 @@
};
&mmc1 {
- status = "disabled";
+ status = "disabled";
};
&mmc2 {
@@ -111,7 +111,7 @@
};
&mmc3 {
- status = "disabled";
+ status = "disabled";
};
&pincntl {
diff --git a/arch/arm/boot/dts/ti/omap/dm816x-clocks.dtsi b/arch/arm/boot/dts/ti/omap/dm816x-clocks.dtsi
index 338449b32a18..76ebc6c3c3e5 100644
--- a/arch/arm/boot/dts/ti/omap/dm816x-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm816x-clocks.dtsi
@@ -177,7 +177,7 @@
compatible = "ti,gate-clock";
clocks = <&sysclk2_ck>;
ti,bit-shift = <1>;
- reg = <0x15dc>;
+ reg = <0x15dc>;
};
audio_pll_a_ck: audio_pll_a_ck@35c {
diff --git a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
index 9df7648c4b79..a595745afe59 100644
--- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
@@ -1695,9 +1695,9 @@
reg = <0x0 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
- status = "disabled";
dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
dma-names = "tx", "rx";
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
index a0c53d9c2625..28b4f12b82a7 100644
--- a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi
@@ -91,22 +91,22 @@
};
&cpu_alert0 {
- temperature = <80000>; /* millicelsius */
+ temperature = <80000>; /* millicelsius */
};
&cpu0 {
- /*
+ /*
* Note that the 1.2GiHz mode is enabled for all SoC variants for
* the Motorola Android Linux v3.0.8 based kernel.
*/
- operating-points = <
- /* kHz uV */
+ operating-points = <
+ /* kHz uV */
300000 1025000
600000 1200000
800000 1313000
1008000 1375000
1200000 1375000
- >;
+ >;
};
&dss {
diff --git a/arch/arm/boot/dts/ti/omap/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/ti/omap/omap3-cm-t3x30.dtsi
index 0e942513560d..6c4916ec41b4 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-cm-t3x30.dtsi
@@ -29,7 +29,7 @@
>;
};
- hsusb0_pins: hsusb0-pins {
+ hsusb0_pins: hsusb0-pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
diff --git a/arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi b/arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi
index aa4fcdbedd8f..519f7b42a59a 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi
@@ -287,7 +287,7 @@
pinctrl-names = "default";
pinctrl-0 = <&accelerator_pins>;
- interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
+ interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
/* click flags */
st,click-single-x;
diff --git a/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd35.dtsi
index 0da561a23f36..2f7a4a717359 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd35.dtsi
@@ -103,7 +103,7 @@
backlight {
compatible = "gpio-backlight";
-
+
pinctrl-names = "default";
pinctrl-0 = <&backlight_pins>;
gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* gpio_145 */
diff --git a/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd43.dtsi
index 981f02f088f8..35701f596972 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-overo-common-lcd43.dtsi
@@ -134,7 +134,7 @@
backlight {
compatible = "gpio-backlight";
-
+
pinctrl-names = "default";
pinctrl-0 = <&backlight_pins>;
gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* gpio_145 */
generated by cgit v1.2.3 (git 2.39.1) at 2026-07-19 23:39:32 +0000