| Age | Commit message (Collapse) | Author |
|---|
|
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
Make sure all members are fully initialized, to avoid such bugs, and to
prevent future breakage when converting drivers to a different method
for specifying the parents.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-ID: <cf858f84a9d517745fb53981f02f9c3dcd65a14f.1787239813.git.geert+renesas@glider.be>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
into clk-pile
Pull clk patches from Brian Masney:
- New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),
UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree
bindings. Si549 support was added to the existing si544 driver.
- New clock and reset support for the Aspeed AST2700 PECI controller and Airoha
EN7523 PCIe PERSTOUT reset lines.
- The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to
the existing optional variant, and exports
devm_clk_hw_register_composite_pdata() for modular drivers.
- Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1
support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL
charge pump/lock parameter programming during dynamic reconfiguration.
- Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in
the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted
gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on
registration failure, a prepare reference leak in the palmas driver,
unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in
pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a
clocking-wizard clock difference detection bug.
- Various cleanups across tegra, st, and mvebu providers to stop misusing the
consumer clock API, along with other minor fixes and improvements.
Signed-off-by: Brian Masney <bmasney@redhat.com>
* tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits)
clk: tegra: set up proper EMC clock implementation for Tegra114
clk: clocking-wizard: remove 20kHz restriction
clk: clocking-wizard: optimize clock search
clk: clocking-wizard: fix clock difference detection
clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
clk: tegra: support 48MHz clock for pll_p_out1
clk: aspeed: add AST2700 PECI clock
dt-bindings: clock: ast2700: add PECI clock
clk: mediatek: Add mt8173-mfgtop driver
dt-bindings: clock: mediatek: Add mt8173 mfgtop
clk: tegra: clean-up simple provider misuse of the consumer API
clk: st: clean-up simple provider misuse of the consumer API
clk: mvebu: clean-up simple provider misuse of the consumer API
clk: remove conditional return with no effect
clk: Add devm_clk_bulk_get_enable()
clk: en7523: add support for dedicated PCIe PERSTOUT reset
dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT
arm64: dts: cix: sky1: add audss cru
reset: cix: add sky1 audss auxiliary reset driver
...
|
|
Pull clk patches picked up by Brian Masney:
Here's various improvements and fixes for the clk subsystem that was posted prior
to the opening of the last merge window.
- Add spread spectrum clock (SSC) support to the clk framework, including a new
assigned-clock-sscs devicetree property and clk_hw_set_spread_spectrum()
API with KUnit tests (Peng Fan)
- Add SCMI clock OEM extensions for the i.MX95 clock driver and introduce a
common SCMI clock header (Peng Fan)
- Add clock, reset, and devicetree bindings for the ESWIN EIC7700 HSP clock and
reset generator (Xuyang Dong)
- Add clk_determine_rate_noop() helper for clock drivers that can do any rate,
and convert existing open-coded implementations across hisilicon, imx, qcom,
renesas, rp1, samsung, scpi, sprd, mediatek phy, and mediatek pmdomain
drivers (Brian Masney)
- Add kernel-doc documentation for struct clk_core and the core clock flags,
and wire up clk identifiers into the documentation build (Brian Masney)
- Fix clk_divider_bestdiv() returning the minimum rate instead of the maximum
rate for large rate requests, with KUnit tests (Lad Prabhakar)
- Fix Nuvoton MA35D1 PLL frequency calculation including ignored div_u64
return values, incorrect PLL_CTL1_FRAC bit field width, and broken
determine_rate logic (Joey Lu)
- Support unique clock names for multi-socket Tegra platforms (Jon Hunter)
- Allow COMPILE_TEST builds for HiSilicon clock drivers (Rosen Penev)
- Various fixes and cleanups from Akari Tsuyukusa, Alexander A. Klimov,
Brian Masney, David Carlier, David Laight, Min zhang, Myeonghun Pak,
Pavel Löbl, Randy Dunlap, Rob Herring, Rosen Penev, Uwe Kleine-König,
William Theesfeld, Xuyang Dong, and Yu-Chun Lin
Signed-off-by: Brian Masney <bmasney@redhat.com>
[sboyd@kernel.org: Fix allmodconfig modpost failure in scmi]
* tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux: (53 commits)
pmdomain: mediatek: mtk-mfg: use clk_determine_rate_noop()
pmdomain: mediatek: airoha: use clk_determine_rate_noop()
phy: mediatek: phy-mtk-hdmi-mt2701: use clk_determine_rate_noop()
clk: sprd: use clk_determine_rate_noop()
clk: scpi: use clk_determine_rate_noop()
clk: samsung: acpm: use clk_determine_rate_noop()
clk: rp1: use clk_determine_rate_noop()
clk: renesas: rzg2l-cpg: use clk_determine_rate_noop()
clk: qcom: smd-rpm: use clk_determine_rate_noop()
clk: qcom: rpmh: use clk_determine_rate_noop()
clk: qcom: rpm: use clk_determine_rate_noop()
clk: imx: scu: use clk_determine_rate_noop()
clk: hisilicon: hi3660-stub: use clk_determine_rate_noop()
clk: add clk_determine_rate_noop()
clk: imx: scu: drop redundant init.ops variable assignment
clk: test: convert constants to use HZ_PER_MHZ
docs: clk: include some identifiers to keep documentation up to date
clk: add kernel docs for struct clk_core
clk: add kernel docs for the core flags
clk: hisilicon: allow COMPILE_TEST builds
...
|
|
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
When an exact clock match is found, there is no need to continue
searching. This process was optimized for versal as part of
'commit e0a94c6bb5b4 ("clk: xilinx: Optimize divisor search in
clk_wzrd_get_divisors_ver()")' but that logic wasn't applied to
the non-versal driver.
Apply this fast-exit logic to the non-versal driver.
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
When dynamically reconfiguring the PLL multiplier, the charge pump (CP),
loop filter resistance (RES), and lock timing parameters must be updated
to match the new multiplier value. Without this, the PLL may fail to lock
or exhibit jitter at certain multiply factors.
Add lookup tables for CP/RES and lock timing values indexed by multiplier
range, and program registers for chargepump and lock delay during dynamic
reconfiguration.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
When using driver on Zynq-7000 (32-bit) determine_rate calculation
overflows. For instance requesting 32MHz with 100MHz parent clock
results in 100000000*(4*1000+0) 32-bit multiplication.
Replace the expression with mult_frac which is already used in
clk_wzrd_recalc_ratef.
Cc: stable@vger.kernel.org
Fixes: 7681f64e6404 ("clk: clocking-wizard: calculate dividers fractional parts")
Signed-off-by: Pale Löbl <pavel@loebl.cz>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
* clk-determine-rate: (120 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: scmi: migrate round_rate() to determine_rate()
clk: ti: fapll: convert from round_rate() to determine_rate()
clk: ti: dra7-atl: convert from round_rate() to determine_rate()
clk: ti: divider: convert from round_rate() to determine_rate()
clk: ti: composite: convert from round_rate() to determine_rate()
clk: ti: dpll: convert from round_rate() to determine_rate()
clk: ti: dpll: change error return from ~0 to -EINVAL
clk: ti: dpll: remove round_rate() in favor of determine_rate()
clk: tegra: tegra210-emc: convert from round_rate() to determine_rate()
clk: tegra: super: convert from round_rate() to determine_rate()
clk: tegra: pll: convert from round_rate() to determine_rate()
clk: tegra: periph: divider: convert from round_rate() to determine_rate()
clk: tegra: divider: convert from round_rate() to determine_rate()
clk: tegra: audio-sync: convert from round_rate() to determine_rate()
clk: fixed-factor: drop round_rate() clk ops
clk: divider: remove round_rate() in favor of determine_rate()
clk: visconti: pll: convert from round_rate() to determine_rate()
clk: versatile: vexpress-osc: convert from round_rate() to determine_rate()
...
|
|
The output clock register offset used in clk_wzrd_register_output_clocks
was incorrectly referencing 0x3C instead of 0x38, which caused
misconfiguration of output dividers on Versal platforms.
Correcting the off-by-one error ensures proper configuration of output
clocks.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Optimise the clock wizard divisor calculation by eliminating the innermost
loop over output divider o. Earlier there was an error that is returned
if the WZRD_MIN_ERR is not achieved error is returned now it computes
the best possible frequency.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
'clk-xilinx' and 'clk-adi' into clk-next
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
* clk-bindings: (30 commits)
dt-bindings: clock: convert lpc1850-cgu.txt to yaml format
dt-bindings: clock: Convert qca,ath79-pll to DT schema
dt-bindings: clock: Convert nuvoton,npcm750-clk to DT schema
dt-bindings: clock: Convert moxa,moxart-clock to DT schema
dt-bindings: clock: Convert microchip,pic32mzda-clk to DT schema
dt-bindings: clock: Convert maxim,max9485 to DT schema
dt-bindings: clock: Convert qcom,krait-cc to DT schema
dt-bindings: clock: qcom: Remove double colon from description
dt-bindings: clock: convert lpc1850-ccu.txt to yaml format
dt-bindings: clock: Convert alphascale,asm9260-clock-controller to DT schema
dt-bindings: clock: Convert marvell,armada-370-corediv-clock to DT schema
dt-bindings: clock: Convert marvell,armada-3700-periph-clock to DT schema
dt-bindings: clock: Convert marvell,mvebu-core-clock to DT schema
dt-bindings: clock: Convert marvell,berlin2-clk to DT schema
dt-bindings: clock: Convert marvell,dove-divider-clock to DT schema
dt-bindings: clock: Convert marvell,armada-3700-tbg-clock to DT schema
dt-bindings: clock: Convert marvell-armada-370-gating-clock to DT schema
dt-bindings: clock: Convert marvell,armada-xp-cpu-clock to DT schema
dt-bindings: clock: Convert TI-NSPIRE clocks to DT schema
dt-bindings: clock: Convert lsi,axm5516-clks to DT schema
...
* clk-cleanup: (29 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: bcm: bcm2835: convert from round_rate() to determine_rate()
MAINTAINERS: Include clk.py under COMMON CLK FRAMEWORK entry
clk: ti: Simplify ti_find_clock_provider()
...
* clk-pwm:
clk: pwm: Make use of non-sleeping PWMs
clk: pwm: Don't reconfigure running PWM at probe time
clk: pwm: Convert to use pwm_apply_might_sleep()
clk: pwm: Let .get_duty_cycle() return the real duty cycle
* clk-hw-device:
clk: tests: add clk_hw_get_dev() and clk_hw_get_of_node() tests
clk: tests: Make clk_register_clk_parent_data_device_driver() common
clk: add a clk_hw helpers to get the clock device or device_node
* clk-xilinx:
clk: xilinx: vcu: Update vcu init/reset sequence
clk: xilinx: vcu: unregister pll_post only if registered correctly
* clk-adi:
clk: clk-axi-clkgen: fix coding style issues
clk: clk-axi-clkgen move to min/max()
clk: clk-axi-clkgen: detect axi_clkgen_limits at runtime
include: adi-axi-common: add new helper macros
include: linux: move adi-axi-common.h out of fpga
clk: clk-axi-clkgen: make sure to include mod_devicetable.h
clk: clk-axi-clkgen: fix fpfd_max frequency for zynq
|
|
Fix the `clk_round_rate` implementation for Versal platforms by calling
the Versal-specific divider calculation helper. The existing code used
the generic divider routine, which results in incorrect round rate.
Fixes: 7681f64e6404 ("clk: clocking-wizard: calculate dividers fractional parts")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20250625054114.28273-1-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Updated vcu init/reset sequence as per design changes.
If VCU reset GPIO is available then do assert and de-assert it before
enabling/disabling gasket isolation.
This GPIO is added because gasket isolation will be removed during startup
that requires access to SLCR register space. Post startup, the ownership of
the register interface lies with logiCORE IP.
Signed-off-by: Rohit Visavalia <rohit.visavalia@amd.com>
Link: https://lore.kernel.org/r/20250210113614.4149050-3-rohit.visavalia@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
If registration of pll_post is failed, it will be set to NULL or ERR,
unregistering same will fail with following call trace:
Unable to handle kernel NULL pointer dereference at virtual address 008
pc : clk_hw_unregister+0xc/0x20
lr : clk_hw_unregister_fixed_factor+0x18/0x30
sp : ffff800011923850
...
Call trace:
clk_hw_unregister+0xc/0x20
clk_hw_unregister_fixed_factor+0x18/0x30
xvcu_unregister_clock_provider+0xcc/0xf4 [xlnx_vcu]
xvcu_probe+0x2bc/0x53c [xlnx_vcu]
Fixes: 4472e1849db7 ("soc: xilinx: vcu: make pll post divider explicit")
Signed-off-by: Rohit Visavalia <rohit.visavalia@amd.com>
Link: https://lore.kernel.org/r/20250210113614.4149050-2-rohit.visavalia@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Calculate dividers fractional parts to optimally modulate output frequency.
Clocking wizard supports having multiplier m and divisors d and o.
Currently the fractional parts of m and o are not utilised.
For the pixel clock usecases a higher accuracy is needed..
Adding support for m and o to have fractional values.
Co-developed-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Tested-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Link: https://lore.kernel.org/r/20250106082937.29555-1-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Xilinx clocking wizard IP core's dynamic reconfiguration support is
optionally enabled at build time. Use the new boolean devicetree
property to indicate whether the hardware supports this feature or not.
Signed-off-by: Harry Austen <hpausten@protonmail.com>
Link: https://lore.kernel.org/r/20240913191037.2690-7-hpausten@protonmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Provide clear separation of dynamic reconfiguration logic, by moving its
setup procedure to its own dedicated function.
Signed-off-by: Harry Austen <hpausten@protonmail.com>
Link: https://lore.kernel.org/r/20240913191037.2690-5-hpausten@protonmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use device managed versions of the clk_hw API, entirely removing the
need for the driver's remove() callback and greatly simplifying the
probe() function's error paths.
Signed-off-by: Harry Austen <hpausten@protonmail.com>
Link: https://lore.kernel.org/r/20240913191037.2690-4-hpausten@protonmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Utilise clock provider API with struct clk_hw instances instead of the
consumer-side struct clk.
Signed-off-by: Harry Austen <hpausten@protonmail.com>
Link: https://lore.kernel.org/r/20240913191037.2690-3-hpausten@protonmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Remove need to do various operations in remove callback and error paths
by utilising device managed versions of clock and notifier APIs.
Signed-off-by: Harry Austen <hpausten@protonmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240913191037.2690-2-hpausten@protonmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all clk drivers to use .remove(), with the eventual goal to drop
struct platform_driver::remove_new(). As .remove() and .remove_new() have
the same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240909144026.870565-2-u.kleine-koenig@baylibre.com
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
`vcu_settings_regmap_config` is not modified and can be declared as
const to move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240703-clk-const-regmap-v1-10-7d15a0671d6f@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The pointer div_addr is being assigned a value that is never used, it is
being re-assigned a different value near the end of the function where
it is being read in the next statement. The initialization is redundant
and can be removed.
Cleans up clang scan build warning:
drivers/clk/xilinx/clk-xlnx-clock-wizard.c:501:16: warning: Value stored
to 'div_addr' during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240223134347.3908301-1-colin.i.king@gmail.com
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for Clocking Wizard for Versal adaptive compute
acceleration platforms. The Versal clocking wizard differs
in the programming model and the register layout.
The CLKFBOUT_1 registers are at offset of 0x200
instead of the 0x330 in Versal. In Versal clocking wizard the low and
high time is programmed instead of the divisor.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20231214105125.26919-3-shubhrajyoti.datta@amd.com
[sboyd@kernel.org: Stop initializing spinlock flags]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org
Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
'clk-ti' and 'clk-kasprintf' into clk-next
- Handle allocation failures from kasprintf() and friends
* clk-imx:
clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe()
clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe
clk: imx: clk-imx8mn: fix memory leak in imx8mn_clocks_probe
dt-bindings: clock: imx8m: Add missing interrupt property
clk: imx: clk-imxrt1050: fix memory leak in imxrt1050_clocks_probe
clk: imx: composite-8m: Add imx8m_divider_determine_rate
clk: imx: scu: use _safe list iterator to avoid a use after free
clk: imx: drop imx_unregister_clocks
clk: imx6ul: retain early UART clocks during kernel init
clk: imx: imx6sx: Remove CLK_SET_RATE_PARENT from the LDB clocks
* clk-microchip:
dt-bindings: clocks: at91sam9x5-sckc: convert to yaml
dt-bindings: clocks: atmel,at91rm9200-pmc: convert to yaml
clk: microchip: Use of_property_read_bool() for boolean properties
clk: microchip: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE
* clk-cleanup:
clk: fix typo in clk_hw_register_fixed_rate_parent_data() macro
clk: Fix memory leak in devm_clk_notifier_register()
clk: mvebu: Iterate over possible CPUs instead of DT CPU nodes
clk: mvebu: Use of_get_cpu_hwid() to read CPU ID
MAINTAINERS: Add Marvell mvebu clock drivers
clk: mvebu: Use of_address_to_resource()
clk: tegra: tegra124-emc: Fix potential memory leak
clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider()
clk: bcm: rpi: Fix off by one in raspberrypi_discover_clocks()
clk: sifive: Use devm_platform_ioremap_resource()
* clk-bindings:
dt-bindings: clock: drop unneeded quotes and use absolute /schemas path
dt-bindings: rcc: stm32: Sync with u-boot copy for STM32MP13 SoC
* clk-ti:
clk: keystone: syscon-clk: Add support for audio refclk
dt-bindings: clock: Add binding documentation for TI Audio REFCLK
dt-bindings: clock: ehrpwm: Remove unneeded syscon compatible
clk: keystone: syscon-clk: Allow the clock node to not be of type syscon
* clk-kasprintf:
clk: clocking-wizard: check return value of devm_kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
clk: si5341: free unused memory on probe failure
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: cdce925: check return value of kasprintf()
clk: vc5: check memory returned by kasprintf()
|
|
devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).
Fixes: 2046338dcbc6 ("ARM: mxs: Use soc bus infrastructure")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230530093913.1656095-9-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Smatch detected this potential error pointer dereference
clk_wzrd_register_divider(). If devm_clk_hw_register() fails then
it sets "hw" to an error pointer and then dereferences it on the
next line. Return the error directly instead.
Fixes: 5a853722eb32 ("staging: clocking-wizard: Add support for dynamic reconfiguration")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/f0e39b5c-4554-41e0-80d9-54ca3fabd060@kili.mountain
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
- BCM63268 timer clock and reset controller
- Convert platform clk drivers to remove_new
* clk-xilinx:
clocking-wizard: Support higher frequency accuracy
clk: zynqmp: pll: Remove the limit
* clk-broadcom:
clk: bcm: Add BCM63268 timer clock and reset driver
dt-bindings: clock: Add BCM63268 timer binding
dt-bindings: reset: add BCM63268 timer reset definitions
dt-bindings: clk: add BCM63268 timer clock definitions
* clk-platform: (25 commits)
clk: xilinx: Convert to platform remove callback returning void
clk: x86: Convert to platform remove callback returning void
clk: uniphier: Convert to platform remove callback returning void
clk: ti: Convert to platform remove callback returning void
clk: tegra: Convert to platform remove callback returning void
clk: stm32: Convert to platform remove callback returning void
clk: mvebu: Convert to platform remove callback returning void
clk: mmp: Convert to platform remove callback returning void
clk: keystone: Convert to platform remove callback returning void
clk: hisilicon: Convert to platform remove callback returning void
clk: stm32mp1: Convert to platform remove callback returning void
clk: scpi: Convert to platform remove callback returning void
clk: s2mps11: Convert to platform remove callback returning void
clk: pwm: Convert to platform remove callback returning void
clk: palmas: Convert to platform remove callback returning void
clk: hsdk-pll: Convert to platform remove callback returning void
clk: fixed-rate: Convert to platform remove callback returning void
clk: fixed-mmio: Convert to platform remove callback returning void
clk: fixed-factor: Convert to platform remove callback returning void
clk: axm5516: Convert to platform remove callback returning void
...
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230312161512.2715500-31-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
xvcu_remove() is only called for a device after after xvcu_probe()
completed successfully. In that case dev_set_drvdata() was called for
that device with a non-NULL parameter, so platform_get_drvdata() won't
return NULL and the if condition is never true.
Drop the if, preparing a conversion to make platform driver's remove
callback return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230312161512.2715500-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Change the multipliers and divisors to support a higher
frequency accuracy if there is only one output.
Currently only O is changed now we are changing M, D and O.
For multiple output case the earlier behavior is retained.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20230327062637.22237-1-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This entire Kconfig file is only included within the if COMMON_CLK
section of the drivers/clk/Kconfig file. That makes the depends on
COMMON_CLK here redundant. Remove it.
Cc: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20221003203103.2705007-1-sboyd@kernel.org
|
|
This driver uses devm_platform_ioremap_resource() and thus depends on
HAS_IOMEM. Add the Kconfig dependency to avoid build issues.
Reported-by: kernel test robot <lkp@intel.com>
Cc: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Fixes: c822490f52da ("clk: clocking-wizard: Move clocking-wizard out")
Link: https://lore.kernel.org/r/20221003202608.2611295-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220913031442.980720-1-yangyingliang@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Update the compatible to indicate support for both 5.2 and 6.0
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220411100443.15132-6-shubhrajyoti.datta@xilinx.com
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The 5.2 the reconfig is triggered by writing 7 followed by
2 to the reconfig reg. Add the same. Also 6.0 is backward
compatible so it should be fine.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220411100443.15132-5-shubhrajyoti.datta@xilinx.com
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Rename nr-outputs to xlnx,output.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220411100443.15132-4-shubhrajyoti.datta@xilinx.com
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add clocking wizard driver to clk.
And delete the driver from the staging as it is in drivers/clk.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220411100443.15132-3-shubhrajyoti.datta@xilinx.com
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The xlnx_vcu driver is actually a clock controller driver which provides
clocks that can be used by a driver for the encoder/decoder units. There
is no reason to keep this driver in soc. Move the driver to clk.
NOTE: The register mapping actually contains registers for AXI
performance monitoring, but these are not used by the driver.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-16-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
