| Age | Commit message (Collapse) | Author |
|---|
|
Add display_panic_screen to struct drm_plane_funcs. If set on a plane,
register a panic handler for the plane from the DRM core's panic
handling. Invoke this helper from the core to display a panic screen.
The new callback replaces get_scanout_buffer as signal for panic
support in a plane. Using get_scanout_buffer is now merely a detail
of the implementation. This will also free struct drm_scanout_buffer
for use cases besides panic handling.
With display_panic_screen in place, rename draw_panic_plane() to
drm_plane_helper_display_panic_screen() and make it available to DRM
drivers via drm_panic_helper.h. Do not change the implementation or
functionality of this code. drm_plane_helper_display_panic_screen()
still supports kernel messages, user messages and QR codes on various
color formats.
Then update all drivers that implement panic support. Provide the
initializer macro DRM_PANIC_PLANE_FUNCS that sets display_panic_screen
to drm_plane_helper_display_panic_screen(). If panic handling has
been disabled, it instead clears the callback. There's again no change
in functionality.
This logically splits panic handling into a set of entry points in the
DRM code and a set of helper functions provided by drivers. The core
invokes the driver's helper via callback, while the driver can tailor
the implementation to its needs. Panic handling now works like most
other interfaces in the DRM framework.
Locking and state-handling happens in the DRM core or helpers. Drivers
that receive a call to display_panic_screen can assume that no concurrent
modeset takes place on the plane or its CRTC.
Also update the documentation. Move information about locking and state
guarantees from drm_panic_trylock() to display_panic_screen, where
drivers authors can find it easily. Move information about the features
of the current implementation to drm_panic_helper_display_panic_screen().
v4:
- remove obsolete comment about fbcon interference (Jocelyn)
v2:
- only consider planes with get_scanout_buffer (Sashiko)
- set callback for planes create with drm_crtc_init() (Sashiko)
- return errno code from display_panic_screen
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260911124540.279841-12-tzimmermann@suse.de
|
|
dispc_plane_state_dma_addr() and dispc_plane_state_p_uv_addr() are
basically the same as drm_fb_dma_get_gem_addr(), without the support for
formats with block parameters. Since the driver doesn't support any of
those formats, the result is the same.
Switch to drm_fb_dma_get_gem_addr() for getting the framebuffer addresses.
Drop the const modifier on "struct drm_plane_state *state" for
dispc_plane_setup() so that the state can be passed to
drm_fb_dma_get_gem_addr().
Using the helper also future proofs the driver in case block parameters
are added for more formats, especially the common sub-sampled YUV
formats.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20260903063142.3770509-1-wenst@chromium.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The simple KMS helpers are deprecated because they only add an
intermediate layer between drivers and atomic modesetting.
Open-code drm_simple_encoder_init() by calling drm_encoder_init()
directly and providing driver-local drm_encoder_funcs.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260720-drm_simple_encoder_init-v2-7-5020b630668a@gmail.com
|
|
Callers of of_drm_find_panel() and drm_of_find_panel_or_bridge()
receive a pointer with no reference held, creating a window where
the panel device can be unregistered and freed between the lookup
and first use (e.g., drm_panel_prepare()).
Fix the lookup function by acquiring a reference with drm_panel_get()
before returning, under panel_lock. Callers are now responsible for
calling drm_panel_put() when they no longer need the pointer.
For bridge drivers that immediately wrap the panel in a panel_bridge
(which acquires its own reference), release the lookup reference right
after the bridge creation call.
For analogix-anx6345, which stores the panel for direct use, release
the reference in the i2c remove path.
For platform drivers using analogix_dp_core with a component lifecycle
(exynos_dp, rockchip analogix_dp), release the lookup reference in the
platform remove() function. The panel_bridge created during bind() holds
a separate reference that devm cleanup releases after remove() returns.
Also fix devm_drm_of_get_bridge() and drmm_of_get_bridge() in
bridge/panel.c itself, update a second batch of drivers calling
of_drm_find_panel() or drm_of_find_panel_or_bridge() to release the
lookup reference after wrapping the panel in a bridge, and handle the
cases where a panel is found but cannot be used, dropping the reference
immediately in those paths.
Assisted-by: Claude:claude-opus-4-6
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260717-drm_refcount_wiring-v3-3-023900c32e01@redhat.com
|
|
The drm_bridge_funcs.atomic_reset callback and its
drm_atomic_helper_bridge_reset() helper are deprecated.
Switch to the atomic_create_state callback and its
drm_atomic_helper_bridge_create_state() counterpart.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-70-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The drm_bridge_funcs.atomic_reset callback and its
drm_atomic_helper_bridge_reset() helper are deprecated.
Switch to the atomic_create_state callback and its
drm_atomic_helper_bridge_create_state() counterpart.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-69-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Our driver uses reset to create the various object states, but only
calls the helper that allocate a new state. They are thus strictly
equivalent to the new atomic_create_state helpers, so let's switch to
these.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-18-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Merge drm-next to bring the drm_atomic_state renaming patch.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1-rc1:
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
|
|
drm_connector_attach_encoder() is now called by
drm_bridge_connector_init().
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260423115550.444930-2-luca.ceresoli@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
tidss encoder-bridge is not added with drm_bridge_add() call, which
leads to:
[drm] Missing drm_bridge_add() before attach
Add the missing call, using devm_drm_bridge_add() variant to get the
drm_bridge_remove() handled automatically.
The commit marked with the Fixes tag (from v6.6) is the commit that
added the encoder bridge without drm_bridge_add(). However, this fix is
not directly applicable there as devm_drm_bridge_alloc() was not used to
alloc the bridge, so using devm version for drm_bridge_add() wouldn't be
safe. Instead, drm_bridge_add() and drm_bridge_remove() would be needed
there, but that would require new plumbing code as we don't have a
separate cleanup function in the tidss_encoder.c, not in the tidss_kms.c
from which the encoder is created.
Also, there has been no reported bugs caused by the missing
drm_bridge_add(). The drm_bridge_add() initializes the bridge's
hpd_mutex, but HPD is not used for the encoder bridge. drm_bridge_add()
also adds the bridge to the global bridge_list, which is only used in
of_drm_find_bridge(), and again that is not used for the encoder bridge.
Thus, while the original commit is not right, there should be no bugs
caused by it, and for the time being I'm not sending a patch for the
stable kernels for the original commit.
This fix applies on top of commit 66cdf05f8548 ("drm/tidss: encoder:
convert to devm_drm_bridge_alloc()"), which changes the tidss_encoder.c
to use the devm variant (added in v6.17). The warning print was added in
v6.19, so applying this fix to v6.17+ gets rid of the warning for all
kernel versions.
Cc: stable@vger.kernel.org # v6.17+
Fixes: c932ced6b585 ("drm/tidss: Update encoder/bridge chain connect model")
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260311-tidss-minor-fixes-v2-2-cb4479784458@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
We are calling drm_mode_config_reset() twice at probe time. There's no
reason for this and the second call can be removed, reducing work at
probe time slightly.
Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260311-tidss-minor-fixes-v2-1-cb4479784458@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
TI's OLDI and DSI encoders need to be set up before the crtc is enabled,
but the DRM helpers will enable the crtc first. This causes various
issues on TI platforms, like visual artifacts or crtc sync lost
warnings.
Thus drm_atomic_helper_commit_modeset_enables() and
drm_atomic_helper_commit_modeset_disables() cannot be used, as they
enable the crtc before bridges' pre-enable, and disable the crtc after
bridges' post-disable.
Open code the drm_atomic_helper_commit_modeset_enables() and
drm_atomic_helper_commit_modeset_disables(), and first call the bridges'
pre-enables, then crtc enable, then bridges' post-enable (and vice versa
for disable).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org # v6.17+
Fixes: c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Tested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-4-fda68fa1b3de@ideasonboard.com
|
|
After integrating OLDI support[0], it is necessary to identify which VP
instances use OLDI, since the OLDI driver owns the video port clock
(as a serial clock). Clock operations on these VPs must be delegated to
the OLDI driver, not handled by the TIDSS driver. This issue also
emerged in upstream discussions when DSI-related clock management was
attempted in the TIDSS driver[1].
To address this, add an 'is_ext_vp_clk' array to the 'tidss_device'
structure, marking a VP as 'true' during 'tidss_oldi_init()' and as
'false' during 'tidss_oldi_deinit()'. TIDSS then uses 'is_ext_vp_clk'
to skip clock validation checks in 'dispc_vp_mode_valid()' for VPs
under OLDI control.
Since OLDI uses the DSS VP clock directly as a serial interface and
manages its own rate, mode validation should be implemented in the OLDI
bridge's 'mode_valid' hook. This patch adds that logic, ensuring proper
delegation and avoiding spurious clock handling in the TIDSS driver.
[0]: https://lore.kernel.org/all/20250528122544.817829-1-aradhya.bhatia@linux.dev/
[1]: https://lore.kernel.org/all/DA6TT575Z82D.3MPK8HG5GRL8U@kernel.org/
Fixes: 7246e0929945 ("drm/tidss: Add OLDI bridge support")
Tested-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Link: https://patch.msgid.link/20251104151422.307162-3-s-jain1@ti.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/ffd5ebe03391b3c01e616c0c844a4b8ddecede36.1762513240.git.jani.nikula@intel.com
|
|
The TIDSS hardware does not have independent maximum or minimum pixel
clock limits for each video port. Instead, these limits are determined
by the SoC's clock architecture. Previously, this constraint was
modeled using the 'max_pclk_khz' and 'min_pclk_khz' fields in
'dispc_features', but this approach is static and does not account for
the dynamic behavior of PLLs.
This patch removes the 'max_pclk_khz' and 'min_pclk_khz' fields from
'dispc_features'. The correct way to check if a requested mode's pixel
clock is supported is by using 'clk_round_rate()' in the 'mode_valid()'
hook. If the best frequency match for the mode clock falls within the
supported tolerance, it is approved. TIDSS supports a 5% pixel clock
tolerance, which is now reflected in the validation logic.
This change allows existing DSS-compatible drivers to be reused across
SoCs that only differ in their pixel clock characteristics. The
validation uses 'clk_round_rate()' for each mode, which may introduce
additional delay (about 3.5 ms for 30 modes), but this is generally
negligible. Users desiring faster validation may bypass these calls
selectively, for example, checking only the highest resolution mode,
as shown here[1].
[1]: https://lore.kernel.org/all/20250704094851.182131-3-j-choudhary@ti.com/
Tested-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Link: https://patch.msgid.link/20251104151422.307162-2-s-jain1@ti.com
[Tomi: dropped 'inline' from check_pixel_clock]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
We have drm_crtc_vblank_crtc() to get the struct drm_vblank_crtc pointer
for a crtc. Use it instead of poking at dev->vblank[] directly.
Cc: Jyri Sarha <jyri.sarha@iki.fi>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patch.msgid.link/ffd5ebe03391b3c01e616c0c844a4b8ddecede36.1762513240.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
It was reported that Weston stops at an assert, which checks that the
page flip event timestamp is the same or newer than the previous
timestamp:
weston_output_finish_frame: Assertion `timespec_sub_to_nsec(stamp, &output->frame_time) >= 0' failed.
With manual tests, I can see that when I enable the CRTC, I get a page
flip event with a timestamp of 0. Tracking this down led to
drm_reset_vblank_timestamp() which does "t_vblank = 0" if
"high-precision query" is not available.
TI DSS does not have any hardware timestamping, and thus the default
ktime_get() is used in the DRM framework to get the vblank timestamp,
and ktime_get() is not "high precision" here.
It is not quite clear why the framework behaves this way, but I assume
the idea is that drm_crtc_vblank_on(), which calls
drm_reset_vblank_timestamp(), can be called at any time, and thus
ktime_get() wouldn't give a good timestamp. And, the idea is that the
driver would wait until next vblank after the CRTC enable, and then we
could get a good timestamp. This is hinted in the comment: "reinitialize
delayed at next vblank interrupt and assign 0 for now".
I think that makes sense. However, when we enable the CRTC in TI DSS,
i.e. we write the enable bit to the hardware, that's the exact moment
when the "vblank cycle" starts. It is the zero point in the cycle, and
thus ktime_get() would give a good timestamp.
I am not sure if this is applicable to other hardware, and if so, how
should it be solved in the framework. So, let's fix this in the tidss
driver at least for now.
This patch updates the vblank->time manually to ktime_get() just before
sending the vblank event, and we enable the crtc just before calling
ktime_get(). To get even more exact timing, the dispc_vp_enable() is
moved inside the event_lock spinlock.
With this, we get a proper timestamp for the page flip event from
enabling the CRTC, and Weston is happy.
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://patch.msgid.link/20250905-tidss-fix-timestamp-v1-2-c2aedf31e2c9@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Closes: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1553964/processor-sdk-am62x-weston-fails-to-wake-from-idle-time-sleep-restarts-after-sigterm
Closes: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1416342/am625-am625-doesn-t-wake-up-from-standy-when-idle-time-is-configured-in-weston-ini
|
|
tidss_crtc.c calls dispc_vp_prepare() and dispc_vp_enable() in that
order, next to each other. dispc_vp_prepare() does preparations for
enabling the crtc, by writing some registers, and dispc_vp_enable() does
more preparations. As the last thing, dispc_vp_enable() enables the CRTC
by writing the enable bit.
There might have been a reason at some point in the history for this
split, but I can't find any point to it. They also do a bit of
overlapping work: both call dispc_vp_find_bus_fmt(). They could as well
be a single function.
But instead of combining them, this patch moves everything from
dispc_vp_enable() to dispc_vp_prepare(), except the actual CRTC enable
bit write. The reason for this is that unlike all the preparatory
register writes, CRTC enable has an immediate effect, starting the
timing generator and the CRTC as a whole. Thus it may be important to
time the enable just right (as we do in the next patch).
No functional changes.
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://patch.msgid.link/20250905-tidss-fix-timestamp-v1-1-c2aedf31e2c9@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
There are a gazillion files that depend on drm_print.h being indirectly
included via drm_buddy.h, drm_mm.h, or ttm/ttm_resource.h. In
preparation for removing those includes, explicitly include drm_print.h
where needed.
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/5fe67395907be33eb5199ea6d540e29fddee71c8.1761734313.git.jani.nikula@intel.com
|
|
The tidss_crtc_reset() function will (rightfully) destroy any
pre-existing state.
However, the tidss CRTC driver has its own CRTC state structure that
subclasses drm_crtc_state, and yet will destroy the previous state
by calling __drm_atomic_helper_crtc_destroy_state() and kfree() on its
drm_crtc_state pointer.
It works only because the drm_crtc_state is the first field in the
structure, and thus its offset is 0. It's incredibly fragile however, so
let's call our destroy implementation in such a case to deal with it
properly.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-state-readout-v1-22-14ad5315da3f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250902-drm-state-readout-v1-22-14ad5315da3f@kernel.org
|
|
The tidss crtc driver implements its own state, with its own
implementation of reset and duplicate_state, but uses the default
destroy_state helper.
This somewhat works for now because the drm_crtc_state field in
tidss_crtc_state is the first field so the offset is 0, but it's pretty
fragile and it should really have its own destroy_state implementation.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-state-readout-v1-21-14ad5315da3f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250902-drm-state-readout-v1-21-14ad5315da3f@kernel.org
|
|
The tidss_crtc_reset() function stores a pointer to struct
tidss_crtc_state in a variable called tcrtc, while it uses tcrtc as a
pointer to struct tidss_crtc in the rest of the driver.
This is confusing, so let's change the variable name.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-state-readout-v1-20-14ad5315da3f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250902-drm-state-readout-v1-20-14ad5315da3f@kernel.org
|
|
These logs don't really log any information and create checkpatch
warnings. Remove them.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-state-readout-v1-19-14ad5315da3f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250902-drm-state-readout-v1-19-14ad5315da3f@kernel.org
|
|
DRM drivers should prefer the drm logging functions to the dev logging
ones when possible. Let's convert the existing dev_* logs to their drm
counterparts.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250902-drm-state-readout-v1-18-14ad5315da3f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250902-drm-state-readout-v1-18-14ad5315da3f@kernel.org
|
|
After a recent series to use FIELD_PREP and FIELD_MODIFY in
tidss_dispc.c, there are many errors when bitfield.h is not implicitly
included, such as when building allmodconfig for ARCH=hexagon:
drivers/gpu/drm/tidss/tidss_dispc.c:1116:2: error: call to undeclared function 'FIELD_MODIFY'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1116 | VP_REG_FLD_MOD(dispc, hw_videoport, DISPC_VP_CONTROL, v,
| ^
drivers/gpu/drm/tidss/tidss_dispc.c:631:3: note: expanded from macro 'VP_REG_FLD_MOD'
631 | FIELD_MODIFY((mask), &_reg, (val)); \
| ^
drivers/gpu/drm/tidss/tidss_dispc.c:1140:2: error: call to undeclared function 'FIELD_MODIFY'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1140 | FIELD_MODIFY(DISPC_VP_DSS_OLDI_CFG_MAP_MASK, &oldi_cfg,
| ^
drivers/gpu/drm/tidss/tidss_dispc.c:1203:10: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1203 | FIELD_PREP(DISPC_VP_TIMING_H_SYNC_PULSE_MASK, hsw - 1) |
| ^
...
Explicitly include bitfield.h to resolve the errors.
Fixes: 9accc8b10de8 ("drm/tidss: dispc: Get rid of FLD_VAL")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250902-drm-tidss-fix-missing-bitfield-h-v1-1-aaad4a285f98@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Now that we have all the accessors taking masks, we can create defines
for them and reuse them as needed.
It makes the driver easier to read, less prone to consistency issues,
and allows to reuse defines when needed.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-14-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The OVR_REG_FLD_MOD function takes the start and end bits as parameter
and will generate a mask out of them.
This makes it difficult to share the masks between callers, since we now
need two arguments and to keep them consistent.
Let's change OVR_REG_FLD_MOD to take the mask as an argument instead,
and let the caller create the mask. Eventually, this mask will be moved
to a define.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-13-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The VP_REG_FLD_MOD function takes the start and end bits as parameter
and will generate a mask out of them.
This makes it difficult to share the masks between callers, since we now
need two arguments and to keep them consistent.
Let's change VP_REG_FLD_MOD to take the mask as an argument instead, and
let the caller create the mask. Eventually, this mask will be moved to a
define.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-12-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The VP_REG_GET function takes the start and end bits as parameter and
will generate a mask out of them.
This makes it difficult to share the masks between callers, since we now
need two arguments and to keep them consistent.
Let's change VP_REG_GET to take the mask as an argument instead, and let
the caller create the mask. Eventually, this mask will be moved to a
define.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-11-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The VID_REG_FLD_MOD function takes the start and end bits as parameter
and will generate a mask out of them.
This makes it difficult to share the masks between callers, since we now
need two arguments and to keep them consistent.
Let's change VID_REG_FLD_MOD to take the mask as an argument instead,
and let the caller create the mask. Eventually, this mask will be moved
to a define.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-10-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The VID_REG_GET function takes the start and end bits as parameter and
will generate a mask out of them.
This makes it difficult to share the masks between callers, since we now
need two arguments and to keep them consistent.
Let's change VID_REG_GET to take the mask as an argument instead, and
let the caller create the mask. Eventually, this mask will be moved to a
define.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-9-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The REG_FLD_MOD function takes the start and end bits as parameter and
will generate a mask out of them.
This makes it difficult to share the masks between callers, since we now
need two arguments and to keep them consistent.
Let's change REG_FLD_MOD to take the mask as an argument instead, and
let the caller create the mask. Eventually, this mask will be moved to a
define.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-8-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The REG_GET function takes the start and end bits as parameter and will
generate a mask out of them.
This makes it difficult to share the masks between callers, since we now
need two arguments and to keep them consistent.
Let's change REG_GET to take the mask as an argument instead, and let
the caller create the mask. Eventually, this mask will be moved to a
define.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-7-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The FLD_MOD function is an equivalent to what FIELD_MODIFY + GENMASK
provide, so let's drop it and switch to the latter.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-6-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The FLD_GET function is an equivalent to what FIELD_GET + GENMASK
provide, so let's drop it and switch to the latter.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-5-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The FLD_VAL function is an equivalent to what FIELD_PREP + GENMASK
provide, so let's drop it and switch to the latter.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-4-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The dispc FLD_MASK function is an exact equivalent of the GENMASK macro.
Let's convert the dispc driver to the latter.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-3-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The dispc driver uses upper-cased, inlined, functions to provide
macro-like accessors to the dispc registers.
This is confusing, since upper-case is usually used by macros, and that
pattern will create gcc errors later on in this series.
Let's switch to macros to make it more consistent, and prevent those
errors down the line.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-2-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The OVR_REG_GET function in the dispc driver is not used anywhere. Let's
drop it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250827-drm-tidss-field-api-v3-1-7689b664cc63@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Add a call to drm_aperture_remove_framebuffers() to drop the possible
early fb (simplefb).
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250416-tidss-splash-v1-2-4ff396eb5008@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The assignment of zero to variable is redundant as the following
continue statement loops back to the start of the loop where
ret is assigned a new value from the return to the call to
get_parent_dss_vp. Remove assignment.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250702084844.966199-1-colin.i.king@gmail.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
TIDSS uses crtc_* fields to propagate its registers and set the
clock rates. So set the CRTC modesetting timing parameters with
the adjusted mode when needed, to set correct values.
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20250624080402.302526-1-j-choudhary@ti.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Use the crtc_* fields from drm_display_mode, instead of the "logical"
fields. This shouldn't change anything in practice, but afaiu the crtc_*
fields are the correct ones to use here.
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-3-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Fix missing includes and struct declarations. Even if these don't cause
any compile issues at the moment, it's good to have them correct.
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Parth Pancholi <parth.pancholi@toradex.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-2-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
DRM bridges now use "devm_drm_bridge_alloc()" for allocation and
initialization. "devm_kzalloc()" is not allowed anymore and it results
in WARNING. So convert it.
Fixes: 7246e0929945 ("drm/tidss: Add OLDI bridge support")
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20250714104554.13441-1-j-choudhary@ti.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Convert the tidss encoder to use devm_drm_bridge_alloc(). Instead of
allocating the memory by drmm_simple_encoder_alloc() use
devm_drm_bridge_alloc() and initialize the encoder afterwards.
Fixes: a7748dd127ea ("drm/bridge: get/put the bridge reference in drm_bridge_add/remove()")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250716134107.4084945-1-mwalle@kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The AM62x and AM62Px SoCs feature 2 OLDI TXes each, which makes it
possible to connect them in dual-link or cloned single-link OLDI display
modes. The current OLDI support in tidss_dispc.c can only support for
a single OLDI TX, connected to a VP and doesn't really support
configuration of OLDIs in the other modes. The current OLDI support in
tidss_dispc.c also works on the principle that the OLDI output can only
be served by one, and only one, DSS video-port. This isn't the case in
the AM62Px SoC, where there are 2 DSS controllers present that share the
OLDI TXes.
Having their own devicetree and their own bridge entity will help
support the various display modes and sharing possiblilities of the OLDI
hardware.
For all these reasons, add support for the OLDI TXes as DRM bridges.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Michael Walle <mwalle@kernel.org> # on am67a
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250528122544.817829-5-aradhya.bhatia@linux.dev
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
