| Age | Commit message (Collapse) | Author |
|---|
|
It is possible that the dm_ima_measure_on_* functions run at the same
time as a table is getting swapped, but before the md->ima.active_table
is updated by dm_ima_measure_on_device_resume(). Instead of using the
current device size, use the size of the active table that is being
measured (assuming there is one), so the information is consistent.
Also, don't allocate a separate string to hold the capactiy. Just
print it directly to the measurement buffer.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Now that two processes can't modify md->ima in
dm_ima_measure_on_device_clear() at the same time, there's no need to
track if an inactive table was actually removed. We might as well
clean it up unconditionally, on the off chance that a previous
ima measurement failed and left md->ima.inactive_table behind.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
the dm-ima code did not keep the dm_ima_measure_on_* functions from
running at the same time. This could lead to various errors. If two
processes were updating the device state, one could update the state
first, but the other could measure the state first, causing the the
current device state to appear incorrect. If a table load happened while
a device was resuming, the IMA measurement could report the wrong table
being active. And if two dm_ima_measure_on_* functions ran at the same
time, one of them could free data that the other was accessing, causing
a crash.
All the core dm functions that call a dm_ima_measure_on_* function
update the device state they want to measure under the _hash_lock,
except for do_resume(). But holding the _hash_lock is not a good way to
synchronize these functions. It's a global mutex, that is needed in many
dm operations, and the dm_ima_measure_* functions can sleep, blocking
any dm operation on any device that needs the _hash_lock.
To serialize and order the IMA measurement functions, the
dm_ima_measurements now has two counters, update_idx and measure_idx.
update_idx is incremented while holding the _hash_lock and saved, along
with the device name and uuid, in a dm_ima_context struct. Once the
_hash_lock is dropped, the dm_ima_measure_* function is called. It waits
until measure_idx matches the saved value of update_idx, ensuring that
the updates and measurements happen in the same order if there are
multiple processes changing the device at the same time. Then it
measures the device, updates measure_idx, and wakes up any other
process waiting to do a measurement. This makes sure that the
measurements are serialized and done in the order that the _hash_lock
was acquired in. But they only block other measurements for the same
device, which are unlikely to happen at the same time.
do_resume() is trickier, because it removes the inactive table while
holding the _hash_lock, but doesn't hold it while updating md->map. To
make sure it is also ordered, the IMA code grabs the _hash_lock after
md->map is updated. Then it makes sure that the device isn't being
removed and that another do_resume() hasn't already changed the active
table again, and serializes like the other functions do.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
There is no status flag that is is used for STATUSTYPE_IMA type
status() calls, and STATUSTYPE_IMA itself is not a valid
status flag.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
There's no point in saving the string length of DM_IMA_VERSION_STR. It's
a constant, so the compiler will precompute it. dm_create() will already
zero out the rest of dm->ima.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Make dm_ima_measure_on_table_load() use the SHA-256 library API instead
of crypto_shash to calculate the SHA-256 hash value that it needs. This
is simpler and more efficient. It also ensures that SHA-256 is actually
available and doesn't fail due to the unreliable loading by name.
While doing this, also use kasprintf() to simplify building the string
version of the digest.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
'GPL-2.0-only' is used instead of 'GPL-2.0' because SPDX has
deprecated its use.
Suggested-by: John Wiele <jwiele@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The DM events present in the ima log contain various attributes in the
key=value format. The attributes' names/values may change in future,
and new attributes may also get added. The attestation server needs
some versioning to determine which attributes are supported and are
expected in the ima log.
Add version information to the DM events present in the ima log to
help attestation servers to correctly process the attributes across
different versions.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The active/inactive table hashes measured in the ima log do not contain
the information about hash algorithm. This information is useful for the
attestation servers to recreate the hashes and compare them with the ones
present in the ima log to verify the table contents.
Prefix the table hashes in various DM events in ima log with the hash
algorithm used to compute those hashes.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
A given block device is identified by it's name and UUID. However, both
these parameters can be renamed. For an external attestation service to
correctly attest a given device, it needs to keep track of these rename
events.
Update the device data with the new values for IMA measurements. Measure
both old and new device name/UUID parameters in the same IMA measurement
event, so that the old and the new values can be connected later.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
For a given block device, an inactive table slot contains the parameters
to configure the device with. The inactive table can be cleared
multiple times, accidentally or maliciously, which may impact the
functionality of the device, and compromise the system. Therefore it is
important to measure and log the event when a table is cleared.
Measure device parameters, and table hashes when the inactive table slot
is cleared.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Presence of an active block-device, configured with expected parameters,
is important for an external attestation service to determine if a system
meets the attestation requirements. Therefore it is important for DM to
measure the device remove events.
Measure device parameters and table hashes when the device is removed,
using either remove or remove_all.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
A given block device can load a table multiple times, with different
input parameters, before eventually resuming it. Further, a device may
be suspended and then resumed. The device may never resume after a
table-load. Because of the above valid scenarios for a given device,
it is important to measure and log the device resume event using IMA.
Also, if the table is large, measuring it in clear-text each time the
device changes state, will unnecessarily increase the size of IMA log.
Since the table clear-text is already measured during table-load event,
measuring the hash during resume should be sufficient to validate the
table contents.
Measure the device parameters, and hash of the active table, when the
device is resumed.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
DM configures a block device with various target specific attributes
passed to it as a table. DM loads the table, and calls each target’s
respective constructors with the attributes as input parameters.
Some of these attributes are critical to ensure the device meets
certain security bar. Thus, IMA should measure these attributes, to
ensure they are not tampered with, during the lifetime of the device.
So that the external services can have high confidence in the
configuration of the block-devices on a given system.
Some devices may have large tables. And a given device may change its
state (table-load, suspend, resume, rename, remove, table-clear etc.)
many times. Measuring these attributes each time when the device
changes its state will significantly increase the size of the IMA logs.
Further, once configured, these attributes are not expected to change
unless a new table is loaded, or a device is removed and recreated.
Therefore the clear-text of the attributes should only be measured
during table load, and the hash of the active/inactive table should be
measured for the remaining device state changes.
Export IMA function ima_measure_critical_data() to allow measurement
of DM device parameters, as well as target specific attributes, during
table load. Compute the hash of the inactive table and store it for
measurements during future state change. If a load is called multiple
times, update the inactive table hash with the hash of the latest
populated table. So that the correct inactive table hash is measured
when the device transitions to different states like resume, remove,
rename, etc.
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # leak fix
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
