| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- blk-cgroup locking rework and fixes:
- fix a use-after-free in __blkcg_rstat_flush()
- defer freeing policy data until after an RCU grace period
- defer the blkcg css_put until the blkg is unlinked from
the queue
- unwind the queue_lock nesting under RCU / blkcg->lock
across the lookup, create, associate and destroy paths
- NVMe fixes via Keith:
- Fix a crash and memory leak during invalid cdev teardown,
and related cdev cleanups (Maurizio, John)
- nvmet fixes: handle TCP_CLOSING in the tcp state_change
handler, reject short AUTH_RECEIVE buffers, handle inline
data with a nonzero offset in rdma, fix an sq refcount leak,
and allocate ana_state with the port (Maurizio, Michael,
Bryam, Wentao, Rosen)
- nvme-fc fix to not cancel requests on an IO target before it
is initialized (Mohamed)
- nvme-apple fix to prevent shared tags across queues on Apple
A11 (Nick)
- Various smaller fixes and cleanups (John)
- MD fixes via Yu Kuai:
- raid1/raid10 fixes for writes_pending and barrier reference
leaks on write and discard failures, plus REQ_NOWAIT handling
fixes (Abd-Alrhman)
- raid5 discard accounting and validation, and a batch of fixes
for stripe batch races (Yu Kuai, Chen)
- Protect raid1 head_position during read balancing (Chen)
- block bio-integrity fixes: correct an error injection static key
decrement, fix GFP flag confusion in bio_integrity_alloc_buf(), and
handle REQ_OP_ZONE_APPEND in __bio_integrity_action() (Christoph)
- Fixes for bio_iov_iter_bounce_write(): revert the iov_iter after a
short copy, and respect the iov_iter nofault flag (Qu)
- Invalidate the cached plug timestamp after a task switch, and clear
PF_BLOCK_TS in copy_process() (Usama)
- Fix the IORING_URING_CMD_REISSUE flags check in blkdev_uring_cmd()
(Yitang)
- Remove a redundant plug in __submit_bio() (Wen)
- Don't warn when reclassifying a busy socket lock in nbd (Deepanshu)
* tag 'block-7.2-20260625' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (45 commits)
block: handle REQ_OP_ZONE_APPEND in __bio_integrity_action
block: fix GFP_ flags confusion in bio_integrity_alloc_buf
block, bfq: don't grab queue_lock to initialize bfq
mm/page_io: don't nest queue_lock under rcu in bio_associate_blkg_from_page()
blk-cgroup: don't nest queue_lock under blkcg->lock in blkcg_destroy_blkgs()
blk-cgroup: don't nest queue_lock under rcu in bio_associate_blkg()
blk-cgroup: don't nest queue_lock under rcu in blkg_lookup_create()
blk-cgroup: don't nest queue_lock under rcu in blkcg_print_blkgs()
blk-cgroup: delay freeing policy data after rcu grace period
blk-cgroup: protect iterating blkgs with blkcg->lock in blkcg_print_stat()
md/raid5: avoid R5_Overlap races while breaking stripe batches
md/raid5: use stripe state snapshot in break_stripe_batch_list()
blk-cgroup: defer blkcg css_put until blkg is unlinked from queue
blk-cgroup: fix UAF in __blkcg_rstat_flush()
block, bfq: protect async queue reset with blkcg locks
nbd: don't warn when reclassifying a busy socket lock
block: fix incorrect error injection static key decrement
md/raid5: let stripe batch bm_seq comparison wrap-safe
md/raid1: protect head_position for read balance
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
...
|
|
KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()
on sh->dev[i].flags (plain word write vs. atomic bit op)..
and .. one possible scenario is:
CPU1 CPU2
break_stripe_batch_list(sh1)
-> handle sh2
-> lock(sh2)
-> sh2->batch_head = NULL
-> unlock(sh2)
-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)
-> wake_up_bit(sh2->dev[i].flags)
raid5_make_request()
-> add_all_stripe_bios(sh2)
-> lock(sh2)
-> stripe_bio_overlaps(sh2) returns true
batch_head is NULL, so new bio overlap
exist bio on sh2 -> true
-> set_bit(R5_Overlap, sh2->dev[i].flags)
-> unlock(sh2)
-> wait_on_bit(sh2->dev[i].flags)
-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap
No wait_up_bit(), CPU2 could be wait_on_bit() forever...
Fix by :
- Expand the protect zone.
- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.
- Move sh/head_sh->batch_head = NULL to the end of protected zone , and ,
any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:
- see batch_head != null, and , is rejected by stripe_bio_overlaps()
under the lock (no R5_Overlap wait ) , or ,
- sees batch_head == NULL, only after dev[i].flags has already been
set and the prior R5_Overlap waiters worken.
KCSAN report:
================================================
BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request
write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0:
raid5_make_request+0xea0/0x2930
md_handle_request+0x4a2/0xa40
md_submit_bio+0x109/0x1a0
__submit_bio+0x2ec/0x390
submit_bio_noacct_nocheck+0x457/0x710
submit_bio_noacct+0x2a7/0xc20
submit_bio+0x56/0x250
blkdev_direct_IO+0x54c/0xda0
blkdev_write_iter+0x38f/0x570
aio_write+0x22b/0x490
io_submit_one+0xa51/0xf70
__x64_sys_io_submit+0xf7/0x220
x64_sys_call+0x1907/0x1c60
do_syscall_64+0x130/0x570
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5:
break_stripe_batch_list+0x249/0x480
handle_stripe_clean_event+0x720/0x9b0
handle_stripe+0x32fb/0x4500
handle_active_stripes.isra.0+0x6e0/0xa50
raid5d+0x7e0/0xba0
md_thread+0x15a/0x2d0
kthread+0x1e3/0x220
ret_from_fork+0x37a/0x410
ret_from_fork_asm+0x1a/0x30
value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap
Fixes: fb642b92c267 ("md/raid5: duplicate some more handle_stripe_clean_event code in break_stripe_batch_list")
Signed-off-by: Chen Cheng <chencheng@fnnas.com>
Link: https://patch.msgid.link/20260619041013.1207148-1-chencheng@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
The patch just suppress KCSAN noise. No functional change.
RAID-5 can group multi full-stripe-write aka stripe_head into a
batch aka batch_list, with one head_sh leading them. Call
break_stripe_batch_list() when the batch is finished, or,
a stripe has to be dropped out of the batch.
break_stripe_batch_list() reads stripe state several times while
request paths can update thost state words concurrently with
lockless bitops, which reported by KCSAN.
Use a snapshot to guarantees that the value used for
warning, copying, and handle checks is internally consistent
at current read moment.
KCSAN report:
==============================================
BUG: KCSAN: data-race in __add_stripe_bio / break_stripe_batch_list
write (marked) to 0xffff8e89d4f0b988 of 8 bytes by task 4323 on cpu 3:
__add_stripe_bio+0x35e/0x400
raid5_make_request+0x6ac/0x2930
md_handle_request+0x4a2/0xa40
md_submit_bio+0x109/0x1a0
__submit_bio+0x2ec/0x390
submit_bio_noacct_nocheck+0x457/0x710
submit_bio_noacct+0x2a7/0xc20
submit_bio+0x56/0x250
blkdev_direct_IO+0x54c/0xda0
blkdev_write_iter+0x38f/0x570
aio_write+0x22b/0x490
io_submit_one+0xa51/0xf70
read to 0xffff8e89d4f0b988 of 8 bytes by task 4290 on cpu 4:
break_stripe_batch_list+0x3ce/0x480
handle_stripe_clean_event+0x720/0x9b0
handle_stripe+0x32fb/0x4500
handle_active_stripes.isra.0+0x6e0/0xa50
raid5d+0x7e0/0xba0
Signed-off-by: Chen Cheng <chencheng@fnnas.com>
Link: https://patch.msgid.link/20260618134748.1168360-1-chencheng@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
|
|
Once the 32-bit seq wraps, a newer bm_seq can look smaller
than old, so .. covert to wrap-safe calculate way.
Signed-off-by: Chen Cheng <chencheng@fnnas.com>
Link: https://patch.msgid.link/20260618025735.915113-1-chencheng@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
llbitmap discard is useful even when no underlying member device supports
it. The discard still converts the llbitmap range to unwritten, so later
reads and recovery do not rely on stale parity for that range.
Let llbitmap discard bypass the raid5 lower discard support check. If lower
discard is not safe or not supported, complete the accounted clone after
md_account_bio() so the llbitmap conversion callbacks run without member
discard bios.
Link: https://patch.msgid.link/20260605072639.2434847-4-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
Raid5 used to disable discard limits when devices_handle_discard_safely
was not set or when stacked member limits could not support a full-stripe
discard. That hides discard from userspace before raid5 can decide whether
a request can be handled safely.
Follow other virtual drivers and advertise a UINT_MAX discard limit for the
md device. Cache lower discard support in r5conf when setting queue limits,
and reject unsupported discard bios before queuing stripe work.
Link: https://patch.msgid.link/20260605072639.2434847-3-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
Raid5 handles discard bios internally through make_discard_request() and
never passes them through md_account_bio(). As a result, discard IO is
missing the md-device iostat accounting that normal raid5 IO and discard
IO in other raid levels get from md_account_bio().
Before accounting the bio, trim the request to the full data stripes that
raid5 will actually discard. The first full stripe is the ceiling of the
bio start divided by data-stripe sectors, and the last full stripe is the
floor of the bio end divided by data-stripe sectors. Account that exact
MD logical full-stripe range, then restore the original iterator so bio
completion and iostat still cover the original request.
Link: https://patch.msgid.link/20260605072639.2434847-2-yukuai@kernel.org
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
Returning DM_MAPIO_REQUEUE from the target map() function only requeues
the bio during noflush suspends. During regular operations or during
flushing suspends, it fails the bio. Failing the bio during flushing
suspends is the correct behavior here. The bio cannot be handled, and
dm-raid cannot suspend while it is outstanding. But during normal
operations, dm-raid should not push the bio back to dm. Instead, wait
for the reshape to be resumed.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Reviewed-by: Xiao Ni <xiao@kernel.org>
Link: https://patch.msgid.link/20260428232010.2785514-1-bmarzins@redhat.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
|
|
Stop directly calling into function pointers from users of the RAID6 PQ
API, and provide exported functions with proper documentation and API
guarantees asserts where applicable instead.
Link: https://lore.kernel.org/20260518051804.462141-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org> # kunit only on arm64
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Li Nan <linan122@huawei.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Song Liu <song@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If make_stripe_request() returns STRIPE_WAIT_RESHAPE,
raid5_make_request() will free the cloned bio. But raid5_make_request()
can call make_stripe_request() multiple times, writing to the various
stripes. If that bio got added to the toread or towrite lists of a
stripe disk in an earlier call to make_stripe_request(), then it's not
safe to just free the bio if a later part of it is found to cross the
reshape position. Doing so can lead to a UAF error, when bio_endio()
is called on the bio for the earlier stripes.
Instead, raid5_make_request() needs to wait until all parts of the bio
have called bio_endio(). To do this, bios that cross the reshape
position while the reshape can't make progress are flagged as needing to
wait for all parts to complete. When raid5_make_request() has a bio that
failed make_stripe_request() with STRIPE_WAIT_RESHAPE, it sets
bi->bi_private to a completion struct and waits for completion after
ending the bio. When the bio_endio() is called for the last time on a
clone bio with bi->bi_private set, it wakes up the waiter. This
guarantees that raid5_make_request() doesn't return until the cloned bio
needing a retry for io across the reshape boundary is safely cleaned up.
There is a simple reproducer available at [1]. Compile the kernel with
KASAN for more useful reporting when the error is triggered (this is not
necessary to see the bug).
[1] https://gist.github.com/bmarzins/e48598824305cf2171289e47d7241fa5
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/r/20260408043548.1695157-1-bmarzins@redhat.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
When retry_aligned_read() encounters an overlapped stripe, it releases
the stripe via raid5_release_stripe() which puts it on the lockless
released_stripes llist. In the next raid5d loop iteration,
release_stripe_list() drains the stripe onto handle_list (since
STRIPE_HANDLE is set by the original IO), but retry_aligned_read()
runs before handle_active_stripes() and removes the stripe from
handle_list via find_get_stripe() -> list_del_init(). This prevents
handle_stripe() from ever processing the stripe to resolve the
overlap, causing an infinite loop and soft lockup.
Fix this by using __release_stripe() with temp_inactive_list instead
of raid5_release_stripe() in the failure path, so the stripe does not
go through the released_stripes llist. This allows raid5d to break out
of its loop, and the overlap will be resolved when the stripe is
eventually processed by handle_stripe().
Fixes: 773ca82fa1ee ("raid5: make release_stripe lockless")
Cc: stable@vger.kernel.org
Signed-off-by: FengWei Shih <dannyshih@synology.com>
Signed-off-by: Chia-Ming Chang <chiamingc@synology.com>
Link: https://lore.kernel.org/linux-raid/20260402061406.455755-1-chiamingc@synology.com/
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
Move the handle_stripe() documentation comment from above
analyse_stripe() to directly above handle_stripe() where it belongs.
Signed-off-by: Chen Cheng <chencheng@fnnas.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Link: https://lore.kernel.org/linux-raid/20260304111001.15767-1-chencheng@fnnas.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
When skip_copy is enabled on a doubly-degraded RAID6, a device that is
being written to will be in R5_LOCKED state with R5_UPTODATE cleared.
If a new read triggers fetch_block() while the write is still in
flight, the 2-failure compute path may select this locked device as a
compute target because it is not R5_UPTODATE.
Because skip_copy makes the device page point directly to the bio page,
reconstructing data into it might be risky. Also, since the compute
marks the device R5_UPTODATE, it triggers WARN_ON in ops_run_io()
which checks that R5_SkipCopy and R5_UPTODATE are not both set.
This can be reproduced by running small-range concurrent read/write on
a doubly-degraded RAID6 with skip_copy enabled, for example:
mdadm -C /dev/md0 -l6 -n6 -R -f /dev/loop[0-3] missing missing
echo 1 > /sys/block/md0/md/skip_copy
fio --filename=/dev/md0 --rw=randrw --bs=4k --numjobs=8 \
--iodepth=32 --size=4M --runtime=30 --time_based --direct=1
Fix by checking R5_LOCKED before proceeding with the compute. The
compute will be retried once the lock is cleared on IO completion.
Signed-off-by: FengWei Shih <dannyshih@synology.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Link: https://lore.kernel.org/linux-raid/20260319053351.3676794-1-dannyshih@synology.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
Set chunk_sectors to the full stripe width (io_opt) so that the block
layer splits I/O at full stripe boundaries. This ensures that large
writes are aligned to full stripes, avoiding the read-modify-write
overhead that occurs with partial stripe writes in RAID-5/6.
When chunk_sectors is set, the block layer's bio splitting logic in
get_max_io_size() uses blk_boundary_sectors_left() to limit I/O size
to the boundary. This naturally aligns split bios to full stripe
boundaries, enabling more efficient full stripe writes.
Test results with 24-disk RAID5 (chunk_size=64k):
dd if=/dev/zero of=/dev/md0 bs=10M oflag=direct
Before: 461 MB/s
After: 520 MB/s (+12.8%)
Link: https://lore.kernel.org/linux-raid/20260223035834.3132498-1-yukuai@fnnas.com
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
bdev_nonrot() is simply the negative return value of bdev_rot().
So replace all call sites of bdev_nonrot() with calls to bdev_rot()
and remove bdev_nonrot().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
When llbitmap bit state is still unwritten, any new write should force
rcw, as bitmap_ops->blocks_synced() is checked in handle_stripe_dirtying().
However, later the same check is missing in need_this_block(), causing
stripe to deadloop during handling because handle_stripe() will decide
to go to handle_stripe_fill(), meanwhile need_this_block() always return
0 and nothing is handled.
Link: https://lore.kernel.org/linux-raid/20260123182623.3718551-2-yukuai@fnnas.com
Fixes: 5ab829f1971d ("md/md-llbitmap: introduce new lockless bitmap")
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
|
|
'recovery_disabled' logic is complex and confusing, originally intended to
preserve raid in extreme scenarios. It was used in following cases:
- When sync fails and setting badblocks also fails, kick out non-In_sync
rdev and block spare rdev from joining to preserve raid [1]
- When last backup is unavailable, prevent repeated add-remove of spares
triggering recovery [2]
The original issues are now resolved:
- Error handlers in all raid types prevent last rdev from being kicked out
- Disks with failed recovery are marked Faulty and can't re-join
Therefore, remove 'recovery_disabled' as it's no longer needed.
[1] 5389042ffa36 ("md: change managed of recovery_disabled.")
[2] 4044ba58dd15 ("md: don't retry recovery of raid1 that fails due to error on source drive.")
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-13-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
Currently when sync read fails and badblocks set fails (exceeding
512 limit), rdev isn't immediately marked Faulty. Instead
'recovery_disabled' is set and non-In_sync rdevs are removed later.
This preserves array availability if bad regions aren't read, but bad
sectors might be read by users before rdev removal. This occurs due
to incorrect resync/recovery_offset updates that include these bad
sectors.
When badblocks exceed 512, keeping the disk provides little benefit
while adding complexity. Prompt disk replacement is more important.
Therefore when badblocks set fails, directly call md_error to mark rdev
Faulty immediately, preventing potential data access issues.
After this change, cleanup of offset update logic and 'recovery_disabled'
handling will follow.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-6-linan666@huaweicloud.com
Fixes: 5e5702898e93 ("md/raid10: Handle read errors during recovery better.")
Fixes: 3a9f28a5117e ("md/raid1: improve handling of read failure during recovery.")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
The 'ok' parameter in md_done_sync() is redundant for most callers that
always pass 'true'. Factor error handling logic into a separate helper
function md_sync_error() to eliminate unnecessary parameter passing and
improve code clarity.
No functional changes introduced.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-3-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
Otherwise, even if user issue IO by io_opt, such IO will be split
by max_sectors before they are submitted to raid5. For consequence,
full stripe IO is impossible.
BTW, dm-raid5 is not affected and still have such problem.
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-7-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
On the one hand, stripe_request_ctx is 72 bytes, and it's a bit huge for
a stack variable.
On the other hand, the bitmap sectors_to_do is a fixed size, result in
max_hw_sector_kb of raid5 array is at most 256 * 4k = 1Mb, and this will
make full stripe IO impossible for the array that chunk_size * data_disks
is bigger. Allocate ctx during runtime will make it possible to get rid
of this limit.
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-6-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
|
|
There is not need to use a separate field in struct mddev, there are no
functional changes.
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-5-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
|
|
There is not need to use a separate field in struct mddev, there are no
functional changes.
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-4-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
|
|
Since commit f63f17350e53 ("md/raid5: use the atomic queue limit
update APIs"), the abort path in raid5_run() returns 'ret' instead of
-EIO. However, if log_init() fails, 'ret' is still 0 from the previous
successful call, causing raid5_run() to return success despite the
failure.
Fix this by capturing the return value from log_init().
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-2-yukuai@fnnas.com
Fixes: f63f17350e53 ("md/raid5: use the atomic queue limit update APIs")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202601130531.LGfcZsa4-lkp@intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
raid5_store_group_thread_cnt()
The variable mddev->private is first assigned to conf and then checked:
conf = mddev->private;
if (!conf) ...
If conf is NULL, then mddev->private is also NULL. In this case,
null-pointer dereferences can occur when calling raid5_quiesce():
raid5_quiesce(mddev, true);
raid5_quiesce(mddev, false);
since mddev->private is assigned to conf again in raid5_quiesce(), and conf
is dereferenced in several places, for example:
conf->quiesce = 0;
wake_up(&conf->wait_for_quiescent);
To fix this issue, the function should unlock mddev and return before
invoking raid5_quiesce() when conf is NULL, following the existing pattern
in raid5_change_consistency_policy().
Fixes: fa1944bbe622 ("md/raid5: Wait sync io to finish before changing group cnt")
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/linux-raid/20251225130326.67780-1-islituo@gmail.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
Following test can cause IO hang:
mdadm -CvR /dev/md0 -l10 -n4 /dev/sd[abcd] --assume-clean --chunk=64K --bitmap=none
sleep 5
echo 1 > /sys/block/sda/device/delete
echo 1 > /sys/block/sdb/device/delete
echo 1 > /sys/block/sdc/device/delete
echo 1 > /sys/block/sdd/device/delete
dd if=/dev/md0 of=/dev/null bs=8k count=1 iflag=direct
Root cause:
1) all disks removed, however all rdevs in the array is still in sync,
IO will be issued normally.
2) IO failure from sda, and set badblocks failed, sda will be faulty
and MD_SB_CHANGING_PENDING will be set.
3) error recovery try to recover this IO from other disks, IO will be
issued to sdb, sdc, and sdd.
4) IO failure from sdb, and set badblocks failed again, now array is
broken and will become read-only.
5) IO failure from sdc and sdd, however, stripe can't be handled anymore
because MD_SB_CHANGING_PENDING is set:
handle_stripe
handle_stripe
if (test_bit MD_SB_CHANGING_PENDING)
set_bit STRIPE_HANDLE
goto finish
// skip handling failed stripe
release_stripe
if (test_bit STRIPE_HANDLE)
list_add_tail conf->hand_list
6) later raid5d can't handle failed stripe as well:
raid5d
md_check_recovery
md_update_sb
if (!md_is_rdwr())
// can't clear pending bit
return
if (test_bit MD_SB_CHANGING_PENDING)
break;
// can't handle failed stripe
Since MD_SB_CHANGING_PENDING can never be cleared for read-only array,
fix this problem by skip this checking for read-only array.
Link: https://lore.kernel.org/linux-raid/20251117085557.770572-3-yukuai@fnnas.com
Fixes: d87f064f5874 ("md: never update metadata when array is read-only.")
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
|
|
Previously, raid array used the maximum logical block size (LBS)
of all member disks. Adding a larger LBS disk at runtime could
unexpectedly increase RAID's LBS, risking corruption of existing
partitions. This can be reproduced by:
```
# LBS of sd[de] is 512 bytes, sdf is 4096 bytes.
mdadm -CRq /dev/md0 -l1 -n3 /dev/sd[de] missing --assume-clean
# LBS is 512
cat /sys/block/md0/queue/logical_block_size
# create partition md0p1
parted -s /dev/md0 mklabel gpt mkpart primary 1MiB 100%
lsblk | grep md0p1
# LBS becomes 4096 after adding sdf
mdadm --add -q /dev/md0 /dev/sdf
cat /sys/block/md0/queue/logical_block_size
# partition lost
partprobe /dev/md0
lsblk | grep md0p1
```
Simply restricting larger-LBS disks is inflexible. In some scenarios,
only disks with 512 bytes LBS are available currently, but later, disks
with 4KB LBS may be added to the array.
Making LBS configurable is the best way to solve this scenario.
After this patch, the raid will:
- store LBS in disk metadata
- add a read-write sysfs 'mdX/logical_block_size'
Future mdadm should support setting LBS via metadata field during RAID
creation and the new sysfs. Though the kernel allows runtime LBS changes,
users should avoid modifying it after creating partitions or filesystems
to prevent compatibility issues.
Only 1.x metadata supports configurable LBS. 0.90 metadata inits all
fields to default values at auto-detect. Supporting 0.90 would require
more extensive changes and no such use case has been observed.
Note that many RAID paths rely on PAGE_SIZE alignment, including for
metadata I/O. A larger LBS than PAGE_SIZE will result in metadata
read/write failures. So this config should be prevented.
Link: https://lore.kernel.org/linux-raid/20251103125757.1405796-6-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
|
|
The parameter max_hw_wzeroes_unmap_sectors in queue_limits should be
equal to max_write_zeroes_sectors if it is set to a non-zero value.
However, the stacked md drivers call md_init_stacking_limits() to
initialize this parameter to UINT_MAX but only adjust
max_write_zeroes_sectors when setting limits. Therefore, this
discrepancy triggers a value check failure in blk_validate_limits().
$ modprobe scsi_debug num_parts=2 dev_size_mb=8 lbprz=1 lbpws=1
$ mdadm --create /dev/md0 --level=0 --raid-device=2 /dev/sda1 /dev/sda2
mdadm: Defaulting to version 1.2 metadata
mdadm: RUN_ARRAY failed: Invalid argument
Fix this failure by explicitly setting max_hw_wzeroes_unmap_sectors to
max_write_zeroes_sectors. Since the linear and raid0 drivers support
write zeroes, so they can support unmap write zeroes operation if all of
the backend devices support it. However, the raid1/10/5 drivers don't
support write zeroes, so we have to set it to zero.
Fixes: 0c40d7cb5ef3 ("block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits")
Reported-by: John Garry <john.g.garry@oracle.com>
Closes: https://lore.kernel.org/linux-block/803a2183-a0bb-4b7a-92f1-afc5097630d2@oracle.com/
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/linux-raid/20250910111107.3247530-2-yi.zhang@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
Unify bio split code, prepare to fix ordering of split IO.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If bio is split by internal handling like chunksize or badblocks, the
corresponding trace_block_split() is missing, resulting in blktrace
inability to catch BIO split events and making it harder to analyze the
BIO sequence.
Cc: stable@vger.kernel.org
Fixes: 4b1faf931650 ("block: Kill bio_pair_split()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This flag is used by llbitmap in later patches to skip raid456 initial
recover and delay building initial xor data to first write.
https://lore.kernel.org/linux-raid/20250829080426.1441678-10-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
Currently, raid456 must perform a whole array initial recovery to build
initail xor data, then IO to the array won't have to read all the blocks
in underlying disks.
This behavior will affect IO performance a lot, and nowadays there are
huge disks and the initial recovery can take a long time. Hence llbitmap
will support lazy initial recovery in following patches. This method is
used to check if data blocks is synced or not, if not then IO will still
have to read all blocks for raid456.
Link: https://lore.kernel.org/linux-raid/20250829080426.1441678-9-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
Prepare to introduce CONFIG_MD_BITMAP.
Link: https://lore.kernel.org/linux-raid/20250707012711.376844-13-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
This case can be handled without knowing internal implementation.
Prepare to introduce CONFIG_MD_BITMAP.
Link: https://lore.kernel.org/linux-raid/20250707012711.376844-9-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
This case can be handled without knowing internal implementation.
Prepare to introduce CONFIG_MD_BITMAP.
Link: https://lore.kernel.org/linux-raid/20250707012711.376844-8-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
It's set to 'false' for all callers, hence it's useless and can be
removed.
Link: https://lore.kernel.org/linux-raid/20250707012711.376844-3-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
'recovery_cp' was used to represent the progress of sync, but its name
contains recovery, which can cause confusion. Replaces 'recovery_cp'
with 'resync_offset' for clarity.
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250722033340.1933388-1-linan666@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
When specified with WQ_CPU_INTENSIVE, the workqueue doesn't
participate in concurrency management. This behaviour is already
accounted for WQ_UNBOUND workqueues given that they are assigned
to their own worker threads.
Unset WQ_CPU_INTENSIVE as the use of flag has no effect when
used with WQ_UNBOUND.
Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/linux-raid/20250601013702.64640-1-ryotkkr98@gmail.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
It's no longer used and can be removed, also remove the field
'gendisk->sync_io'.
Link: https://lore.kernel.org/linux-raid/20250506124903.2540268-10-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
During code review, it's found that other than raid5_bitmap_sector(),
reshape_progress is always checked before get_reshape_loc(), while
raid5_bitmap_sector() should check as well to prevent holding the
lock 'conf->device_lock'. Hence merge that checking inside
get_reshape_loc().
Link: https://lore.kernel.org/linux-raid/20250227120452.808503-1-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
Remove the global list 'pers_list', and switch to use md_submodule_head,
which is managed by xarry. Prepare to unify registration and unregistration
for all sub modules.
Link: https://lore.kernel.org/linux-raid/20250215092225.2427977-5-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
There are two BUG reports that raid5 will hang at
bitmap_startwrite([1],[2]), root cause is that bitmap start write and end
write is unbalanced, it's not quite clear where, and while reviewing raid5
code, it's found that bitmap operations can be optimized. For example,
for a 4 disks raid5, with chunksize=8k, if user issue a IO (0 + 48k) to
the array:
┌────────────────────────────────────────────────────────────┐
│chunk 0 │
│ ┌────────────┬─────────────┬─────────────┬────────────┼
│ sh0 │A0: 0 + 4k │A1: 8k + 4k │A2: 16k + 4k │A3: P │
│ ┼────────────┼─────────────┼─────────────┼────────────┼
│ sh1 │B0: 4k + 4k │B1: 12k + 4k │B2: 20k + 4k │B3: P │
┼──────┴────────────┴─────────────┴─────────────┴────────────┼
│chunk 1 │
│ ┌────────────┬─────────────┬─────────────┬────────────┤
│ sh2 │C0: 24k + 4k│C1: 32k + 4k │C2: P │C3: 40k + 4k│
│ ┼────────────┼─────────────┼─────────────┼────────────┼
│ sh3 │D0: 28k + 4k│D1: 36k + 4k │D2: P │D3: 44k + 4k│
└──────┴────────────┴─────────────┴─────────────┴────────────┘
Before this patch, 4 stripe head will be used, and each sh will attach
bio for 3 disks, and each attached bio will trigger
bitmap_startwrite() once, which means total 12 times.
- 3 times (0 + 4k), for (A0, A1 and A2)
- 3 times (4 + 4k), for (B0, B1 and B2)
- 3 times (8 + 4k), for (C0, C1 and C3)
- 3 times (12 + 4k), for (D0, D1 and D3)
After this patch, md upper layer will calculate that IO range (0 + 48k)
is corresponding to the bitmap (0 + 16k), and call bitmap_startwrite()
just once.
Noted that this patch will align bitmap ranges to the chunks, for example,
if user issue a IO (0 + 4k) to array:
- Before this patch, 1 time (0 + 4k), for A0;
- After this patch, 1 time (0 + 8k) for chunk 0;
Usually, one bitmap bit will represent more than one disk chunk, and this
doesn't have any difference. And even if user really created a array
that one chunk contain multiple bits, the overhead is that more data
will be recovered after power failure.
Also remove STRIPE_BITMAP_PENDING since it's not used anymore.
[1] https://lore.kernel.org/all/CAJpMwyjmHQLvm6zg1cmQErttNNQPDAAXPKM3xgTjMhbfts986Q@mail.gmail.com/
[2] https://lore.kernel.org/all/ADF7D720-5764-4AF3-B68E-1845988737AA@flyingcircus.io/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250109015145.158868-6-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Bitmap is used for the whole array for raid1/raid10, hence IO for the
array can be used directly for bitmap. However, bitmap is used for
underlying disks for raid5, hence IO for the array can't be used
directly for bitmap.
Implement pers->bitmap_sector() for raid5 to convert IO ranges from the
array to the underlying disks.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250109015145.158868-5-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
For the case that IO failed for one rdev, the bit will be mark as NEEDED
in following cases:
1) If badblocks is set and rdev is not faulty;
2) If rdev is faulty;
Case 1) is useless because synchronize data to badblocks make no sense.
Case 2) can be replaced with mddev->degraded.
Also remove R1BIO_Degraded, R10BIO_Degraded and STRIPE_DEGRADED since
case 2) no longer use them.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250109015145.158868-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
behind_write is only used in raid1, prepare to refactor
bitmap_{start/end}write(), there are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/r/20250109015145.158868-2-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
