summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2020-07-06pinctrl: imx8qxp: Support building as moduleAnson Huang
Change configuration to "tristate", add module device table, author, description and license to support building i.MX8QXP pinctrl driver as module. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1592979844-18833-8-git-send-email-Anson.Huang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-06pinctrl: imx8mp: Support building as moduleAnson Huang
Change configuration to "tristate", add module device table, author, description and license to support building i.MX8MP pinctrl driver as module. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1592979844-18833-7-git-send-email-Anson.Huang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-06pinctrl: imx8mq: Support building as moduleAnson Huang
Change configuration to "tristate", add module device table, author, description and license to support building i.MX8MQ pinctrl driver as module. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1592979844-18833-6-git-send-email-Anson.Huang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-06pinctrl: imx8mn: Support building as moduleAnson Huang
Change configuration to "tristate", add module device table, author, description and license to support building i.MX8MN pinctrl driver as module. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1592979844-18833-5-git-send-email-Anson.Huang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-06pinctrl: imx8mm: Support building as moduleAnson Huang
Change configuration to "tristate", add module device table, author, description and license to support building i.MX8MM pinctrl driver as module. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1592979844-18833-4-git-send-email-Anson.Huang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-06pinctrl: imx: scu: Support i.MX8 SCU SoCs pinctrl driver built as moduleAnson Huang
Export necessary APIs to support i.MX8 SCU SoCs pinctrl driver to be built as module. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1592979844-18833-3-git-send-email-Anson.Huang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-06pinctrl: imx: Support i.MX8 SoCs pinctrl driver built as moduleAnson Huang
Export necessary APIs to support i.MX8 SoCs pinctrl driver to be built as module. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1592979844-18833-2-git-send-email-Anson.Huang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-06Merge tag 'sh-pfc-for-v5.9-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v5.9 - Add RPC (HyperFlash and Octal-SPI Flash) pin groups on R-Car V3H and V3M.
2020-06-29pinctrl: tigerlake: Add support for Tiger Lake-HMika Westerberg
Intel Tiger Lake-H has different pin layout than the -LP variant so add support for this to the existing Tiger Lake driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-06-29pinctrl: merrifield: Add I²S bus 2 pins to groups and functionsAndy Shevchenko
It is useful to control I²S bus 2 pins if we would like to connect an audio codec. Reported-by: mouse <xllacyx@gmail.com> Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-28Merge tag 'intel-pinctrl-v5.8-2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.8-2 * Fix output pin value handling on Intel Baytrail The following is an automated git shortlog grouped by driver: baytrail: - Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
2020-06-26pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., ↵Hans de Goede
GPIOD_OUT_HIGH) The pins on the Bay Trail SoC have separate input-buffer and output-buffer enable bits and a read of the level bit of the value register will always return the value from the input-buffer. The BIOS of a device may configure a pin in output-only mode, only enabling the output buffer, and write 1 to the level bit to drive the pin high. This 1 written to the level bit will be stored inside the data-latch of the output buffer. But a subsequent read of the value register will return 0 for the level bit because the input-buffer is disabled. This causes a read-modify-write as done by byt_gpio_set_direction() to write 0 to the level bit, driving the pin low! Before this commit byt_gpio_direction_output() relied on pinctrl_gpio_direction_output() to set the direction, followed by a call to byt_gpio_set() to apply the selected value. This causes the pin to go low between the pinctrl_gpio_direction_output() and byt_gpio_set() calls. Change byt_gpio_direction_output() to directly make the register modifications itself instead. Replacing the 2 subsequent writes to the value register with a single write. Note that the pinctrl code does not keep track internally of the direction, so not going through pinctrl_gpio_direction_output() is not an issue. This issue was noticed on a Trekstor SurfTab Twin 10.1. When the panel is already on at boot (no external monitor connected), then the i915 driver does a gpiod_get(..., GPIOD_OUT_HIGH) for the panel-enable GPIO. The temporarily going low of that GPIO was causing the panel to reset itself after which it would not show an image until it was turned off and back on again (until a full modeset was done on it). This commit fixes this. This commit also updates the byt_gpio_direction_input() to use direct register accesses instead of going through pinctrl_gpio_direction_input(), to keep it consistent with byt_gpio_direction_output(). Note for backporting, this commit depends on: commit e2b74419e5cc ("pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output") Cc: stable@vger.kernel.org Fixes: 86e3ef812fe3 ("pinctrl: baytrail: Update gpio chip operations") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-06-22pinctrl: merrifield: Update pin names in accordance with official listAndy Shevchenko
Some of the pin names were provided officially to the customers in different spelling. We update pin names in accordance with the official list. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-06-22pinctrl: sh-pfc: r8a77970: Add RPC pins, groups, and functionsSergei Shtylyov
Add the RPC pins/groups/functions to the R8A77970 PFC driver. They can be used if an Octal-SPI flash or HyperFlash is connected. Based on the patch by Dmitry Shifrin <dmitry.shifrin@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Link: https://lore.kernel.org/r/3982785f-4fca-96f9-2b6a-a0d1828cb0ad@cogentembedded.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-22pinctrl: sh-pfc: r8a77980: Add RPC pins, groups, and functionsSergei Shtylyov
Add the RPC pins/groups/functions to the R8A77980 PFC driver. They can be used if an Octal-SPI flash or HyperFlash is connected. Based on the patch by Dmitry Shifrin <dmitry.shifrin@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Link: https://lore.kernel.org/r/fd089d37-95bb-4ec9-282f-e04d7e5195e4@cogentembedded.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-22pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., ↵Hans de Goede
GPIOD_OUT_HIGH) The pins on the Bay Trail SoC have separate input-buffer and output-buffer enable bits and a read of the level bit of the value register will always return the value from the input-buffer. The BIOS of a device may configure a pin in output-only mode, only enabling the output buffer, and write 1 to the level bit to drive the pin high. This 1 written to the level bit will be stored inside the data-latch of the output buffer. But a subsequent read of the value register will return 0 for the level bit because the input-buffer is disabled. This causes a read-modify-write as done by byt_gpio_set_direction() to write 0 to the level bit, driving the pin low! Before this commit byt_gpio_direction_output() relied on pinctrl_gpio_direction_output() to set the direction, followed by a call to byt_gpio_set() to apply the selected value. This causes the pin to go low between the pinctrl_gpio_direction_output() and byt_gpio_set() calls. Change byt_gpio_direction_output() to directly make the register modifications itself instead. Replacing the 2 subsequent writes to the value register with a single write. Note that the pinctrl code does not keep track internally of the direction, so not going through pinctrl_gpio_direction_output() is not an issue. This issue was noticed on a Trekstor SurfTab Twin 10.1. When the panel is already on at boot (no external monitor connected), then the i915 driver does a gpiod_get(..., GPIOD_OUT_HIGH) for the panel-enable GPIO. The temporarily going low of that GPIO was causing the panel to reset itself after which it would not show an image until it was turned off and back on again (until a full modeset was done on it). This commit fixes this. This commit also updates the byt_gpio_direction_input() to use direct register accesses instead of going through pinctrl_gpio_direction_input(), to keep it consistent with byt_gpio_direction_output(). Note for backporting, this commit depends on: commit e2b74419e5cc ("pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output") Cc: stable@vger.kernel.org Fixes: 86e3ef812fe3 ("pinctrl: baytrail: Update gpio chip operations") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-06-22pinctrl: baytrail: Drop no-op ACPI_PTR() callAndy Shevchenko
Since we dependent on ACPI, there is no need to use ACPI_PTR() which is a no-op in this case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: lynxpoint: Drop no-op ACPI_PTR() callAndy Shevchenko
Since we dependent on ACPI, there is no need to use ACPI_PTR() which is a no-op in this case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: lynxpoint: Introduce helpers to enable or disable inputAndy Shevchenko
Introduce couple of helpers to enable or disable input. i.e. lp_gpio_enable_input() and lp_gpio_disable_input(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: lynxpoint: Make use of for_each_requested_gpio()Andy Shevchenko
Make use of for_each_requested_gpio() instead of home grown analogue. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: intel: Make use of for_each_requested_gpio_in_range()Andy Shevchenko
Make use of for_each_requested_gpio_in_range() instead of home grown analogue. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: intel: Protect IO in few call backs by lockAndy Shevchenko
Protect IO in intel_gpio_get_direction(), intel_gpio_community_irq_handler(), intel_config_get_debounce() and intel_config_get_pull() by lock. Even for simple readl() we better serialize IO to avoid potential problems. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: intel: Split intel_config_get() to three functionsAndy Shevchenko
Split intel_config_get() to three functions, i.e. intel_config_get() and two helpers intel_config_get_pull() and intel_config_get_debounce() to be symmetrical with intel_config_set*(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: intel: Drop the only label in the code for consistencyAndy Shevchenko
Drop the only label in the code, i.e. in intel_config_set_debounce(), for consistency with the rest. In entire driver we use multipoint return. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: intel: Get rid of redundant 'else' in intel_config_set_debounce()Andy Shevchenko
In a code like if (...) { ... goto label; } else { ... } the 'else' keyword is redundant. Get rid of it for better readability. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: intel: Make use of IRQ_RETVAL()Andy Shevchenko
Instead of using bitwise operations against returned values, which is a bit fragile, convert IRQ handler to count amount of GPIO groups, where at least one interrupt happened, and convert it to returned value by IRQ_RETVAL() macro. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: intel: Reduce scope of the lockAndy Shevchenko
In some cases lock covers unneeded calls and operations. Reduce scope of the lock in such cases. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: intel: Disable input and output buffer when switching to GPIOAndy Shevchenko
It's possible scenario that pin has been in different mode, while the respective GPIO register has a leftover output buffer enabled. In such case when we request GPIO it will switch to GPIO mode, and thus to output with unknown value, followed by switching to input mode. This can produce a glitch on the pin. Disable input and output buffer when switching to GPIO to avoid potential glitches. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: cherryview: Re-use data structures from pinctrl-intel.h (part 3)Andy Shevchenko
We have some data structures duplicated across the drivers. Let's deduplicate them by using struct intel_pinctrl_soc_data, struct intel_community and struct intel_pinctrl_context that are being provided by pinctrl-intel.h. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: intel: Allow drivers to define ACPI address space IDAndy Shevchenko
Individual drivers may install ACPI OpRegion handlers based on address space ID which differs from community to community. Add special field in the struct intel_community for that purpose. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: intel: Allow drivers to define total amount of IRQs per communityAndy Shevchenko
Some of the pin control devices may not be capable to generate IRQ per each pin in the community. Allow individual drivers to define total amount of IRQs per community. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: cherryview: Convert chv_writel() to use chv_padreg()Andy Shevchenko
chv_writel() is now solely used for cases where we write data to the PAD registers. In order to simplify callers, calculate register address inside chv_writel(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: cherryview: Introduce helpers to IO with common registersAndy Shevchenko
Pin control device and effectively the single community in it has a set of common registers. It's good to have a helpers to IO on them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: cherryview: Introduce chv_readl() helperAndy Shevchenko
There are plenty of places where we call readl(chv_padreg(pctrl, offset, ...)); Replace them with newly introduced chv_readl() helper chv_readl(pctrl, offset, ...); Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-06-22pinctrl: amd: fix npins for uart0 in kerncz_groupsJacky Hu
uart0_pins is defined as: static const unsigned uart0_pins[] = {135, 136, 137, 138, 139}; which npins is wronly specified as 9 later { .name = "uart0", .pins = uart0_pins, .npins = 9, }, npins should be 5 instead of 9 according to the definition. Signed-off-by: Jacky Hu <hengqing.hu@gmail.com> Link: https://lore.kernel.org/r/20200616015024.287683-1-hengqing.hu@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20Merge branch 'ib-for-each-requested' of /home/linus/linux-gpio into develLinus Walleij
2020-06-20pinctrl: at91: Make use of for_each_requested_gpio()Andy Shevchenko
Make use of for_each_requested_gpio() instead of home grown analogue. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200615150545.87964-6-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20pinctrl: stm32: add possibility to configure pins individuallyAlexandre Torgue
Adds the possibility to configure a single pin through the gpiolib (i.e: to set PULL_UP/PULL_DOWN config). Mutex behavior is slightly changed to avoid a deadlock when pin_config_set is called (in this case pctldev->mutex is already taken). Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Link: https://lore.kernel.org/r/20200615125951.28008-3-alexandre.torgue@st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20pinctrl: stm32: return proper error code in pin_config_setAlexandre Torgue
".pin_config_set" or ".pin_config_group_set" can be called with a configuration not supported (i.e. PIN_CONFIG_PERSIST_STATE). In this case, it is more suitable to return -ENOTSUPP instead of -EINVAL. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Link: https://lore.kernel.org/r/20200615125951.28008-2-alexandre.torgue@st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20pinctrl: stm32: defer probe if reset resource is not yet readyEtienne Carriere
Defer probe when pin controller reset is defined in the system resources but not yet probed. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Link: https://lore.kernel.org/r/20200615125407.27632-3-alexandre.torgue@st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20pinctrl: stm32: don't print an error on probe deferral during clock getEtienne Carriere
Change STM32 pinctrl driver to not print an error trace when probe is deferred due to clock resource. Probe defer issue (for clocks) could occur during bank registering when some banks have already been registered. In this case banks already registered should be released. To not waste time in this case, it is better to check first if all clocks are available before registering banks. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Link: https://lore.kernel.org/r/20200615125407.27632-2-alexandre.torgue@st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20pinctrl: ingenic: Add ingenic,jz4725b-gpio compatible stringPaul Cercueil
Add a compatible string to support the GPIO chips on the JZ4725B SoC. There was already a compatible string for the pinctrl node, but not for the individual GPIO chip nodes. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200612120609.12730-1-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20pinctrl: single: fix function name in documentationDrew Fustini
Use the correct the function name in the documentation for "pcs_parse_one_pinctrl_entry()". "smux_parse_one_pinctrl_entry()" appears to be an artifact from the development of a prior patch series ("simple pinmux driver") which transformed into pinctrl-single. Signed-off-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20200612112758.GA3407886@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20pinctrl: qcom: ipq6018 Add missing pins in qpic pin groupSivaprakash Murugesan
The patch adds missing qpic data pins to qpic pingroup. These pins are necessary for the qpic nand to work. Fixes: ef1ea54eab0e ("pinctrl: qcom: Add ipq6018 pinctrl driver") Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1592541089-17700-1-git-send-email-sivaprak@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-20Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource ↵Haibo Chen
leak in case of error in 'imx_pinctrl_probe()'" This reverts commit ba403242615c2c99e27af7984b1650771a2cc2c9. After commit 26d8cde5260b ("pinctrl: freescale: imx: add shared input select reg support"). i.MX7D has two iomux controllers iomuxc and iomuxc-lpsr which share select_input register for daisy chain settings. If use 'devm_of_iomap()', when probe the iomuxc-lpsr, will call devm_request_mem_region() for the region <0x30330000-0x3033ffff> for the first time. Then, next time when probe the iomuxc, API devm_platform_ioremap_resource() will also use the API devm_request_mem_region() for the share region <0x30330000-0x3033ffff> again, then cause issue, log like below: [ 0.179561] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver [ 0.191742] imx7d-pinctrl 30330000.pinctrl: can't request region for resource [mem 0x30330000-0x3033ffff] [ 0.191842] imx7d-pinctrl: probe of 30330000.pinctrl failed with error -16 Fixes: ba403242615c ("pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1591673223-1680-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-16pinctrl-single: fix pcs_parse_pinconf() return valueDrew Fustini
This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no pinctrl_map is added. The current behavior is to return 0 when !PCS_HAS_PINCONF or !nconfs. Thus pcs_parse_one_pinctrl_entry() incorrectly assumes that a map was added and sets num_maps = 2. Analysis: ========= The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf() if PCS_HAS_PINCONF is enabled. The function pcs_parse_pinconf() returns 0 to indicate there was no error and num_maps is then set to 2: 980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, 981 struct device_node *np, 982 struct pinctrl_map **map, 983 unsigned *num_maps, 984 const char **pgnames) 985 { <snip> 1053 (*map)->type = PIN_MAP_TYPE_MUX_GROUP; 1054 (*map)->data.mux.group = np->name; 1055 (*map)->data.mux.function = np->name; 1056 1057 if (PCS_HAS_PINCONF && function) { 1058 res = pcs_parse_pinconf(pcs, np, function, map); 1059 if (res) 1060 goto free_pingroups; 1061 *num_maps = 2; 1062 } else { 1063 *num_maps = 1; 1064 } However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or !nconfs. I believe these conditions should indicate that no map was added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry() will set num_maps = 2 even though no maps were successfully added, as it does not reach "m++" on line 940: 895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np, 896 struct pcs_function *func, 897 struct pinctrl_map **map) 898 899 { 900 struct pinctrl_map *m = *map; <snip> 917 /* If pinconf isn't supported, don't parse properties in below. */ 918 if (!PCS_HAS_PINCONF) 919 return 0; 920 921 /* cacluate how much properties are supported in current node */ 922 for (i = 0; i < ARRAY_SIZE(prop2); i++) { 923 if (of_find_property(np, prop2[i].name, NULL)) 924 nconfs++; 925 } 926 for (i = 0; i < ARRAY_SIZE(prop4); i++) { 927 if (of_find_property(np, prop4[i].name, NULL)) 928 nconfs++; 929 } 930 if (!nconfs) 919 return 0; 932 933 func->conf = devm_kcalloc(pcs->dev, 934 nconfs, sizeof(struct pcs_conf_vals), 935 GFP_KERNEL); 936 if (!func->conf) 937 return -ENOMEM; 938 func->nconfs = nconfs; 939 conf = &(func->conf[0]); 940 m++; This situtation will cause a boot failure [0] on the BeagleBone Black (AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi has compatible = "pinconf-single" instead of "pinctrl-single". The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no map was added. Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish between -ENOSUPP and other errors. In the case of -ENOSUPP, num_maps is set to 1 as it is valid for pinconf to be enabled and a given pin group to not any pinconf properties. [0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/ Fixes: 9dddb4df90d1 ("pinctrl: single: support generic pinconf") Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200608125143.GA2789203@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-16pinctrl: ingenic: Add NAND FRE/FWE pins for JZ4740Paul Cercueil
Add the FRE/FWE pins for the JZ4740. These pins must be in function #0 for the NAND to work. The reason it worked before was because the bootloader did set these pins to the correct function beforehand. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200607174243.2361664-1-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-16pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warningskernel test robot
drivers/pinctrl/pinctrl-mcp23s08_spi.c:129:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Fixes: 0f04a81784fe ("pinctrl: mcp23s08: Split to three parts: core, I²C, SPI") Signed-off-by: kernel test robot <lkp@intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200608010253.GA79576@44f7ab9e8d59 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-16pinctrl: tegra: Use noirq suspend/resume callbacksVidya Sagar
Use noirq suspend/resume callbacks as other drivers which implement noirq suspend/resume callbacks (Ex:- PCIe) depend on pinctrl driver to configure the signals used by their respective devices in the noirq phase. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200604174935.26560-1-vidyas@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-16pinctrl: qcom: spmi-gpio: fix warning about irq chip reusageDmitry Baryshkov
Fix the following warnings caused by reusage of the same irq_chip instance for all spmi-gpio gpio_irq_chip instances. Instead embed irq_chip into pmic_gpio_state struct. gpio gpiochip2: (c440000.qcom,spmi:pmic@2:gpio@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip3: (c440000.qcom,spmi:pmic@4:gpio@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip4: (c440000.qcom,spmi:pmic@a:gpio@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200604002817.667160-1-dmitry.baryshkov@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-21 00:16:58 +0000