summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2019-08-06pinctrl: freescale: mxs: Add of_node_put() before returnNishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return in three places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lore.kernel.org/r/20190804160420.5309-1-nishkadg.linux@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-06pinctrl: nomadik: abx500: Add of_node_put() before returnNishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lore.kernel.org/r/20190804155154.4916-1-nishkadg.linux@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-06pinctrl: nomadik: nomadik: Add of_node_put() before returnNishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lore.kernel.org/r/20190804155117.4753-1-nishkadg.linux@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-06pinctrl: falcon: Add of_node_put() before returnNishka Dasgupta
Each iteration of for_each_compatible_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return in two places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Link: https://lore.kernel.org/r/20190804152745.2231-1-nishkadg.linux@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: xway: Use devm_kasprintf() instead of fixed buffer formattingGeert Uytterhoeven
Improve readability and maintainability by replacing a hardcoded string allocation and formatting by the use of the devm_kasprintf() helper. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190731132917.17607-4-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: lantiq: Use kasprintf() instead of fixed buffer formattingGeert Uytterhoeven
Improve readability and maintainability by replacing a hardcoded string allocation and formatting by the use of the kasprintf() helper. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190731132917.17607-3-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: devicetree: Use strlen() instead of hardcoded numberGeert Uytterhoeven
Improve readability by replacing a hardcoded number requiring a comment by strlen(). Gcc is smart enough to evaluate the length of a constant string at compile-time. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190731132917.17607-2-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-34-swboyd@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: uniphier: Fix Pro5 SD pin-mux settingKunihiko Hayashi
SD uses the following pins starting from 247: SDCD, SDWP, SDVOLC, SDCLK, SDCMD, SDDAT{0,1,2,3} Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lore.kernel.org/r/1564465410-9165-6-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: uniphier: Add Pro5 PCIe pin-mux settingsKunihiko Hayashi
Pro5 PCIe interface uses the following pins: XPERST, XPEWAKE, XPECLKRQ Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1564465410-9165-5-git-send-email-hayashi.kunihiko@socionext.com Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: uniphier: Add 5th LD20 MPEG2-TS input pin-mux settingKunihiko Hayashi
The 5th serial TS interface uses the following pins: hscin4_s: PCA[11-14] Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lore.kernel.org/r/1564465410-9165-4-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: uniphier: Add another audio I/O pin-mux settings for LD20Kunihiko Hayashi
This adds support for pinmux settings of aout1b group. This group includes audio I/O signals derived from xirq pins, and it is equivalent to "aout1" in functionality. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1564465410-9165-3-git-send-email-hayashi.kunihiko@socionext.com Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: uniphier: Separate modem group from UART ctsrts groupKunihiko Hayashi
It depends on the board implementation whether to have each pins of CTS/RTS, and others for modem. So it is necessary to divide current uart_ctsrts group into uart_ctsrts and uart_modem groups. Since the number of implemented pins for modem differs depending on SoC, each uart_modem group also has a different number of pins. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1564465410-9165-2-git-send-email-hayashi.kunihiko@socionext.com Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: meson-g12a: add pwm_a on GPIOE_2 pinmuxNeil Armstrong
Add the missing pinmux for the pwm_a function on the GPIOE_2 pin. Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20190729125838.6498-1-narmstrong@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Document existence of deprecated compatiblesAndrew Jeffery
Otherwise they look odd in the face of not being listed in the bindings documents. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190724081313.12934-3-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Add AST2600 pinmux supportAndrew Jeffery
The AST2600 pinmux is fairly similar to the previous generations of ASPEED BMC SoCs in terms of architecture, though differ in some of the design details. The complexity of the pin expressions is largely reduced (e.g. there are no-longer signals with multiple expressions muxing them to the associated pin), and there are now signals and buses with multiple pin groups. The driver implements pinmux support for all 244 GPIO-capable pins plus a further four pins that are not GPIO capable but which expose multiple signals. pinconf will be implemented in a follow-up patch. The implementation has been smoke-tested under qemu, and run on hardware by ASPEED. Debugged-by: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190711041942.23202-7-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Add SIG_DESC_CLEAR() helperAndrew Jeffery
The complement of SIG_DESC_SET(). Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190729055604.13239-6-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Add multiple pin group support for functionsAndrew Jeffery
The AST2400 and AST2500 SoCs only exposed one pin group per function. Lone pin groups drove some implementation simplifications in the ASPEED pinmux infrastructure that is now invalid for the AST2600, which supports multiple groups per function for some functions on the chip (SMBus Alert pins and UARTs among others). This patch reworks the macro jungle to enable support for multiple pin groups. In the process we inflict some collateral damage on the existing AST2400 and AST2500 drivers, but the rework is mostly a relatively straight-forward, automated transform of adding the pin name as an argument to some macro calls and implementing wrappers to paper over groups in the cases where there aren't multiple. As previously documented, the macro infrastructure exposes mux configuration as symbols in the source file which are used to detect accidental duplication. Previously these symbols were named in terms of the signal for a given expression. As the AST2600 supports multiple pin groups for a function, the signal name on its own is no-longer unique, and we must switch to the (signal, group) tuple. However, this means that we can no-longer derive the signal expression symbol name from the signal name alone, which among other cases, impacts the operation of the PIN_DECL_x() macros. To fix that and avoid requiring we awkwardly provide the associated group name for every signal for every PIN_DECL_x() invocation, instead opportunistically alias the name of the signal expression symbol from the unique (signal, group) tuple to the also unique (pin, signal) tuple, then reference the alias symbol in the tables generated by PIN_DECL_x(). This way we do not require extra group parameters for PIN_DECL_x() as the pin name was already provided as an argument, and instead simply require that the pin name be provided to the expression declaration macros in order to generate the alias symbol. The patch implements the alias strategy and fixes up all the expression definition macro calls in the AST2400 and AST2500 drivers to account for pin groups. Given the implementation strategy has the property that compilation either fails or loudly warns for bad pin descriptions, this patch is theoretically tested by successfully compiling both affected drivers. For a more practical test I've inspected the diff of the content of the pinctrl debugfs entries before and after the patch under qemu; all pins, functions and groups match. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190729055604.13239-5-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Add PIN_DECL_3() helperAndrew Jeffery
This case is common in the AST2600, so add to the collection. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190729055604.13239-4-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: aspeed: Rename pin declaration macrosAndrew Jeffery
Rename macros as follows: * s/SS_PIN_DECL()/PIN_DECL_1()/ * s/MS_PIN_DECL()/PIN_DECL_2()/ * s/MS_PIN_DECL_()/PIN_DECL_()/ This is in preparation for adding PIN_DECL_3(). We could clean this up with e.g. CPPMAGIC_MAP() from ccan, but that might be a bridge too far given how much of a macro jungle we already have. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190729055604.13239-3-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: sunxi: v3s: introduce support for V3Icenowy Zheng
Introduce the GPIO pins that is only available on V3 (not on V3s) to the V3s pinctrl driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://lore.kernel.org/r/20190728031227.49140-2-icenowy@aosc.io Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: qcom: spmi-gpio: Mark expected switch fall-throughAnders Roxell
When fall-through warnings was enabled by default the following warnings was starting to show up: ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c: In function ‘pmic_gpio_populate’: ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:815:20: warning: this statement may fall through [-Wimplicit-fallthrough=] pad->have_buffer = true; ~~~~~~~~~~~~~~~~~^~~~~~ ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:816:2: note: here case PMIC_GPIO_SUBTYPE_GPIOC_4CH: ^~~~ ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:820:20: warning: this statement may fall through [-Wimplicit-fallthrough=] pad->have_buffer = true; ~~~~~~~~~~~~~~~~~^~~~~~ ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:821:2: note: here case PMIC_GPIO_SUBTYPE_GPIOC_8CH: ^~~~ Rework so that the compiler doesn't warn about fall-through. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20190726112816.19723-1-anders.roxell@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: rockchip: Mark expected switch fall-throughAnders Roxell
When fall-through warnings was enabled by default the following warning was starting to show up: ../drivers/pinctrl/pinctrl-rockchip.c: In function ‘rockchip_gpio_set_config’: ../drivers/pinctrl/pinctrl-rockchip.c:2783:3: warning: this statement may fall through [-Wimplicit-fallthrough=] rockchip_gpio_set_debounce(gc, offset, true); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/pinctrl/pinctrl-rockchip.c:2795:2: note: here default: ^~~~~~~ Rework so that the compiler doesn't warn about fall-through. Add 'return -ENOTSUPP;' to match the comment. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20190726112812.19665-1-anders.roxell@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: oxnas: remove set but not used variable 'arg'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/pinctrl/pinctrl-oxnas.c: In function oxnas_ox810se_pinconf_set: drivers/pinctrl/pinctrl-oxnas.c:905:6: warning: variable arg set but not used [-Wunused-but-set-variable] drivers/pinctrl/pinctrl-oxnas.c: In function oxnas_ox820_pinconf_set: drivers/pinctrl/pinctrl-oxnas.c:944:6: warning: variable arg set but not used [-Wunused-but-set-variable] It is never used since commit 4b0c0c25fa79 ("pinctrl: oxnas: Add support for OX820"), so can be removed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190725142419.29892-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: stmfx: update pinconf settingsAlexandre Torgue
According to the following tab (coming from STMFX datasheet), updates have to done in stmfx_pinconf_set function: -"type" has to be set when "bias" is configured as "pull-up or pull-down" -PIN_CONFIG_DRIVE_PUSH_PULL should only be used when gpio is configured as output. There is so no need to check direction. DIR | TYPE | PUPD | MFX GPIO configuration ----|------|------|--------------------------------------------------- 1 | 1 | 1 | OUTPUT open drain with internal pull-up resistor ----|------|------|--------------------------------------------------- 1 | 1 | 0 | OUTPUT open drain with internal pull-down resistor ----|------|------|--------------------------------------------------- 1 | 0 | 0/1 | OUTPUT push pull no pull ----|------|------|--------------------------------------------------- 0 | 1 | 1 | INPUT with internal pull-up resistor ----|------|------|--------------------------------------------------- 0 | 1 | 0 | INPUT with internal pull-down resistor ----|------|------|--------------------------------------------------- 0 | 0 | 1 | INPUT floating ----|------|------|--------------------------------------------------- 0 | 0 | 0 | analog (GPIO not used, default setting) Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/1564053416-32192-1-git-send-email-amelie.delaunay@st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: sprd: Combine the condition of MISC_PIN and COMMON_PINBaolin Wang
Since the follow-up pin design on Spreadtrum platform has some changes, some configuration of MISC_PIN moved to COMMON_PIN. To support current pin design and keep backward compatibility, we should combine the condition of MISC_PIN and COMMON_PIN to configure an individual pin. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/17af5e761e0515d288a7ea4078ac9aa4a82a7a4e.1564048446.git.baolin.wang@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: sprd: Change to use devm_platform_ioremap_resource()Baolin Wang
The devm_platform_ioremap_resource() function wraps platform_get_resource() and devm_ioremap_resource() in a single helper, thus use it to simplify the code. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/ff410d312ed0047b5a36e5113daf7df78bcf1aa8.1564048446.git.baolin.wang@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: qdf2xxx: Switch to use device_property_count_uXX()Andy Shevchenko
Use use device_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190723192738.68486-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: msm: Switch to use device_property_count_uXX()Andy Shevchenko
Use use device_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190723192738.68486-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: madera: Add configuration for Cirrus Logic CS47L92Charles Keepax
This adds the pinctrl configuration for the CS47L92 codec to the madera pinctrl driver. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190722091015.20884-3-ckeepax@opensource.cirrus.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: madera: Add configuration for Cirrus Logic CS47L15Richard Fitzgerald
This adds the pinctrl configuration for the CS47L15 codec to the madera pinctrl driver. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190722091015.20884-2-ckeepax@opensource.cirrus.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: madera: Use local copy of pdataCharles Keepax
A local copy of the pdata exists and it should be used rather than pulling a fresh copy. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190722091015.20884-1-ckeepax@opensource.cirrus.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: bcm2835: Add support for BCM2711 pull-up functionalityStefan Wahren
The BCM2711 has a new way of selecting the pull-up/pull-down setting for a GPIO pin. The registers used for the BCM2835, GP_PUD and GP_PUDCLKn0, are no longer connected. A new set of registers, GP_GPIO_PUP_PDN_CNTRL_REGx must be used. This commit will add a new compatible string "brcm,bcm2711-gpio" and the kernel driver will use it to select which method is used to select pull-up/pull-down. This patch based on a patch by Al Cooper which was intended for the BCM7211. This is a bugfixed and improved version. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/1563776607-8368-3-git-send-email-wahrenst@gmx.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: tegra210: Add Tegra210 pinctrl pm opsSowjanya Komatineni
This patch adds suspend and resume functionality to Tegra210 pinctrl. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1564607463-28802-3-git-send-email-skomatineni@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: tegra: Add suspend and resume supportSowjanya Komatineni
This patch adds support for Tegra pinctrl driver suspend and resume. During suspend, context of all pinctrl registers are stored and on resume they are all restored to have all the pinmux and pad configuration for normal operation. Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1564607463-28802-2-git-send-email-skomatineni@nvidia.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: rzn1: Add of_node_put() before returnNishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return in three places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-08-03pinctrl: sprd: Fix platform_no_drv_owner.cocci warningsYueHaibing
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190719032414.85369-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29pinctrl: Ingenic: Add pinctrl driver for X1500.Zhou Yanjie
Add support for probing the pinctrl-ingenic driver on the X1500 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Link: https://lore.kernel.org/r/1563076436-5338-7-git-send-email-zhouyanjie@zoho.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29pinctrl: Ingenic: Add pinctrl driver for X1000 and X1000E.Zhou Yanjie
Add support for probing the pinctrl-ingenic driver on the X1000 Soc and the X1000E Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Link: https://lore.kernel.org/r/1563076436-5338-5-git-send-email-zhouyanjie@zoho.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29pinctrl: Ingenic: Add pinctrl driver for JZ4760 and JZ4760B.Zhou Yanjie
Add support for probing the pinctrl-ingenic driver on the JZ4760 Soc and the JZ4760B Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Link: https://lore.kernel.org/r/1563076436-5338-3-git-send-email-zhouyanjie@zoho.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29pinctrl: aspeed: Make aspeed_pinmux_ips staticYueHaibing
Fix sparse warning: drivers/pinctrl/aspeed/pinmux-aspeed.c:8:12: warning: symbol 'aspeed_pinmux_ips' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190711142457.37028-1-yuehaibing@huawei.com Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29pinctrl: msm8998: Squash TSIF pins togetherMarc Gonzalez
TSIF is the Transport Stream Interface. First, rename tsif1 to tsif0, and tsif2 to tsif1. Then squash all 5 tsif0 pins into a single function. Same for tsif1. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Link: https://lore.kernel.org/r/503b2ae8-ead6-70cd-7b21-ce5f5166a23a@free.fr Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29pinctrl: aspeed-g5: Delay acquisition of regmapsAndrew Jeffery
While sorting out some devicetree issues I found that the pinctrl driver was failing to acquire its GFX regmap even though the phandle was present in the devicetree: [ 0.124190] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: No GFX phandle found, some mux configurations may fail Without access to the GFX regmap we fail to configure the mux for the VPO function: [ 1.548866] pinctrl core: add 1 pinctrl maps [ 1.549826] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: found group selector 164 for VPO [ 1.550638] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 144 (V20) for 1e6e6000.display [ 1.551346] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 145 (U19) for 1e6e6000.display ... [ 1.562057] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 218 (T22) for 1e6e6000.display [ 1.562541] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 219 (R20) for 1e6e6000.display [ 1.563113] Muxing pin 144 for VPO [ 1.563456] Want SCU8C[0x00000001]=0x1, got 0x0 from 0x00000000 [ 1.564624] aspeed_gfx 1e6e6000.display: Error applying setting, reverse things back This turned out to be a simple problem of timing: The ASPEED pinctrl driver is probed during arch_initcall(), while GFX is processed much later. As such the GFX syscon is not yet registered during the pinctrl probe() and we get an -EPROBE_DEFER when we try to look it up, however we must not defer probing the pinctrl driver for the inability to mux some GFX-related functions. Switch to lazily grabbing the regmaps when they're first required by the mux configuration. This generates a bit of noise in the patch as we have to drop the `const` qualifier on arguments for several function prototypes, but has the benefit of working. I've smoke tested this for the ast2500-evb under qemu with a dummy graphics device. We now succeed in our attempts to configure the SoC's VPO pinmux function. Fixes: 7d29ed88acbb ("pinctrl: aspeed: Read and write bits in LPC and GFX controllers") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20190724080155.12209-1-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29pinctrl: qcom: Pass irqchip when adding gpiochipLinus Walleij
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For chained irqchips this is a pretty straight-forward conversion. Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Lina Iyer <ilina@codeaurora.org> Link: https://lore.kernel.org/r/20190724083828.7496-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-23pinctrl: intel: Drop double check for data in intel_pinctrl_probe_by_uid()Andy Shevchenko
There is no need to duplicate the check which is done in the common intel_pinctrl_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-23pinctrl: merrifield: Use devm_platform_ioremap_resource()Andy Shevchenko
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-23pinctrl: intel: Use devm_platform_ioremap_resource()Andy Shevchenko
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-23pinctrl: cherryview: Use devm_platform_ioremap_resource()Andy Shevchenko
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-23pinctrl: baytrail: Use devm_platform_ioremap_resource()Andy Shevchenko
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-13Merge tag 'pinctrl-v5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.3 kernel cycle: Core changes: - Device links can optionally be added between a pin control producer and its consumers. This will affect how the system power management is handled: a pin controller will not suspend before all of its consumers have been suspended. This was necessary for the ST Microelectronics STMFX expander and need to be tested on other systems as well: it makes sense to make this default in the long run. Right now it is opt-in per driver. - Drive strength can be specified in microamps. With decreases in silicon technology, milliamps isn't granular enough, let's make it possible to select drive strengths in microamps. Right now the Meson (AMlogic) driver needs this. New drivers: - New subdriver for the Tegra 194 SoC. - New subdriver for the Qualcomm SDM845. - New subdriver for the Qualcomm SM8150. - New subdriver for the Freescale i.MX8MN (Freescale is now a product line of NXP). - New subdriver for Marvell MV98DX1135. Driver improvements: - The Bitmain BM1880 driver now supports pin config in addition to muxing. - The Qualcomm drivers can now reserve some GPIOs as taken aside and not usable for users. This is used in ACPI systems to take out some GPIO lines used by the BIOS so that noone else (neither kernel nor userspace) will play with them by mistake and crash the machine. - A slew of refurbishing around the Aspeed drivers (board management controllers for servers) in preparation for the new Aspeed AST2600 SoC. - A slew of improvements over the SH PFC drivers as usual. - Misc cleanups and fixes" * tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits) pinctrl: aspeed: Strip moved macros and structs from private header pinctrl: aspeed: Fix missed include pinctrl: baytrail: Use GENMASK() consistently pinctrl: baytrail: Re-use data structures from pinctrl-intel.h pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux() pinctrl: qcom: Add SM8150 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding dt-bindings: pinctrl: qcom: Document missing gpio nodes pinctrl: aspeed: Add implementation-related documentation pinctrl: aspeed: Split out pinmux from general pinctrl pinctrl: aspeed: Clarify comment about strapping W1C pinctrl: aspeed: Correct comment that is no longer true MAINTAINERS: Add entry for ASPEED pinctrl drivers dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema dt-bindings: pinctrl: aspeed: Split bindings document in two pinctrl: qcom: Add irq_enable callback for msm gpio pinctrl: madera: Fixup SPDX headers pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard pinctrl: tegra: Add bitmask support for parked bits ...
generated by cgit v1.2.3 (git 2.39.1) at 2026-09-21 07:50:42 +0000