| Age | Commit message (Collapse) | Author |
|---|
|
A pseudo-locked group's RMID is freed when it is created. On unmount
rmdir_all_sub() unconditionally frees all RMID of all groups, resulting
in a double-free of the pseudo-locked group's RMID. The consequence of this
is that the original free results in the pseudo-locked group's RMID being
added to the rmid_free_lru linked list and the second free then attempts
to add the same RMID entry to the rmid_free_lru again.
Do not double-free a pseudo-locked group's RMID.
Fixes: e0bdfe8e36f3 ("x86/intel_rdt: Support creation/removal of pseudo-locked region")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/551432dd7e624a862b8e58314c38aaba0afff3e9.1783377598.git.reinette.chatre@intel.com
|
|
During unmount or failure teardown all mon_data structures that contain
monitoring event file private data are freed after which kernfs nodes are
removed. However, the RDT_DELETED flag is never set for the statically
allocated default resource group.
A concurrent reader of an event file associated with the default resource
group may, after dropping kernfs active protection, block on rdtgroup_mutex
while unmount proceeds to free the file private data and destroy the kernfs
node without waiting for the reader.
When the mutex is released, the reader wakes up, observes that RDT_DELETED
is not set for the default group, and dereferences the already-freed
file private data.
The scenario can be depicted as follows:
CPU0 CPU1
/*
* Default resource group's
* monitoring data accessible via
* kernfs file with kernfs_node::priv
* pointing to a struct mon_data.
* User opens the file for reading.
*/
rdtgroup_mondata_show() /* arch encounters fatal error */
rdtgroup_kn_lock_live() resctrl_exit()
atomic_inc(&rdtgroup_default.waitcount) cpus_read_lock()
kernfs_break_active_protection(kn) mutex_lock(&rdtgroup_mutex)
cpus_read_lock() resctrl_fs_teardown()
mutex_lock(&rdtgroup_mutex) rmdir_all_sub()
mon_put_kn_priv()
/* Delete all mon_data structures */
rdtgroup_destroy_root()
kernfs_destroy_root()
rdtgroup_default.kn = NULL
mutex_unlock(&rdtgroup_mutex)
/*
* rdtgroup_default.flags is empty so
* rdtgroup_kn_lock_live() returns
* &rdtgroup_default
*/
md = of->kn->priv;
/* md points to freed mon_data */
Set RDT_DELETED for the default group unconditionally since the flag does
not lead to the freeing of this statically allocated group.
Do not allow a new resctrl mount if there are any waiters on default group
of previous mount. A new mount will re-initialize the default group that
would appear to waiters from previous mount as though the default group is
accessible causing them to access the mon_data structures from the previous
mount that have been removed.
Fixes: 2a6566038544 ("x86/resctrl: Expand the width of domid by replacing mon_data_bits")
Closes: https://sashiko.dev/#/patchset/20260508182143.14592-1-tony.luck%40intel.com?part=2 [1]
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/49a2ca3ca688f27e1a646cf90e1dc69287021127.1783377598.git.reinette.chatre@intel.com
|
|
If mkdir_mondata_all() or a subsequent call in rdt_get_tree() fails, the
mon_data structures allocated by mon_get_kn_priv() are leaked.
Add mon_put_kn_priv() to the out_mongrp error path to free the mon_data
structures.
Fixes: 2a6566038544 ("x86/resctrl: Expand the width of domid by replacing mon_data_bits")
Closes: https://lore.kernel.org/lkml/5d38c1fb-8f91-472b-8897-24b2f50c772b@intel.com/
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/433623b7e3316ffd52323255d1aa4f156ad97cb1.1783377598.git.reinette.chatre@intel.com
|
|
enabled
The architecture updates the cpu_mask in a domain's header to track which
online CPUs are associated with the domain. When this mask becomes empty
the architecture initiates offline of the domain that includes calling
on resctrl fs to offline the domain. If it is a monitoring domain in
which LLC occupancy is tracked resctrl fs forces the limbo handler to
clear all busy RMID state associated with the domain.
The limbo handler always reads the current event value associated with a
busy RMID irrespective of it being checked as part of regular "is it still
busy" check or whether it will be forced released anyway. When reading an
RMID on a system with SNC enabled the "logical RMID" is converted to the
"physical RMID" and this conversion requires the NUMA node ID of the
resctrl monitoring domain that is in turn determined by querying the NUMA
node ID of any CPU belonging to the monitoring domain.
When the monitoring domain is going offline its cpu_mask is empty causing
the NUMA node ID query via cpu_to_node() to be done with "nr_cpu_ids" as
argument resulting in an out-of-bounds access.
Refactor the limbo handler to skip reading the RMID when the RMID will
just be forced to no longer be dirty in the domain anyway. Add a safety
check to the architecture's RMID reader to protect against this scenario.
Fixes: e13db55b5a0d ("x86/resctrl: Introduce snc_nodes_per_l3_cache")
Closes: https://sashiko.dev/#/patchset/cover.1780456704.git.reinette.chatre%40intel.com?part=9
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/16137433df42f85013b2f7a53626795cbd6637b9.1781029125.git.reinette.chatre@intel.com
|
|
In mbm_event mode, with mbm_assign_on_mkdir set to 1, when a user creates a
new CTRL_MON or MON group resctrl attempts to allocate counters for each of
the supported MBM events on each resctrl domain. As counters are limited,
such allocation may fail and when it does counter allocations for the
remaining domains are skipped even if the domains have available counters.
Because of that, the user needs to view the resource group'smbm_L3_assignments
file to get an accurate view of counter assignment in a new resource group and
then manually create counters in the skipped domains with available counters.
Writes to mbm_L3_assignments using the wildcard format, <event>:*=e, also skip
counter allocation in other domains after a counter allocation failure.
When handling a request to create counters in all domains it is unnecessary
for a counter allocation in one domain to prevent counter allocation in
other domains. Always attempt to allocate all the counters requested.
[ bp: Massage commit message. ]
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
|
|
Commit
3b497c3f4f04 ("fs/resctrl: Introduce the interface to display monitoring modes")
introduced CONFIG_RESCTRL_ASSIGN_FIXED but left adding the Kconfig
entry until it was necessary. The counter assignment mode is fixed in
MPAM, even when there are assignable counters, and so addressing this
is needed to support MPAM.
To avoid the burden of another Kconfig entry, replace
CONFIG_RESCTRL_ASSIGN_FIXED with a new property in 'struct resctrl_mon',
'mbm_cntr_assign_fixed' to be set by the architecture.
Do not request the architecture to change the counter assignment mode if it
does not support doing so. Provide insight to user space about why such a
request fails.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
|
|
The software controller requires that there is one MBM counter per monitor
group that is assigned to the event backing the software controller, as per
mba_MBps_event. When mbm_event mode is in use, it is not guaranteed that any
particular event will have an assigned counter.
Currently, only AMD systems support counter assignment, but the MBA delay
is non-linear and so the software controller is never supported anyway. On
MPAM systems, the MBA delay is linear and so the software controller could
be supported. The MPAM driver, unless a need arises, will not support the
'default' mbm_assign_mode and will always use the 'mbm_event' mode for
memory bandwidth monitoring.
Rather than develop a way to guarantee the counter assignment requirements
needed by the software controller, take the pragmatic approach. Don't allow
the software controller to be used at the same time as 'mbm_event' mode. As
MPAM is the only relevant architecture and it will use 'mbm_event' mode
whenever there are assignable MBM counters, for simplicity's sake, don't
allow the software controller when the MBM counters are assignable.
Implement this by failing the mount if the user requests the software
controller, the mba_MBps option, and the MBM counters are assignable.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
|
|
configurable
When the counter assignment mode is mbm_event resctrl assumes the MBM
events are configurable and exposes the 'event_filter' files. These files
live at info/L3_MON/event_configs/<event>/event_filter and are used to
display and set the event configuration.
The MPAM architecture has support for configuring the memory bandwidth
utilization (MBWU) counters to only count reads or only count
writes. However, in MPAM, this event filtering support is optional in the
hardware (and not yet implemented in the MPAM driver) but MBM counter
assignment is always possible for MPAM MBWU counters.
In order to support mbm_event mode with MPAM, create the 'event_filter'
files read only if the event configuration can't be changed. A user can
still chmod the file and so also return early with an error from
event_filter_write().
Introduce a new monitor property, mbm_cntr_configurable, to indicate
whether or not assignable MBM counters are configurable. On x86, set this
to true whenever mbm_cntr_assignable is true to keep existing behaviour.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/20260506082855.3694761-1-ben.horgan@arm.com
|
|
The error path in resctrl_mkdir_event_configs() is unnecessarily
complicated. Simplify it to just return directly on error.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://lore.kernel.org/r/20260506082855.3694761-1-ben.horgan@arm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
|
|
Using the stricter "./tools/docs/kernel-doc -Wall -v" to verify proper
formatting of documentation comments includes warnings related to return
markup on functions that are omitted during the default verification
checks. This stricter verification reports a couple of missing return
descriptions in resctrl:
Warning: .../fs/resctrl/rdtgroup.c:1536 No description found for return value of 'rdtgroup_cbm_to_size'
Warning: .../fs/resctrl/rdtgroup.c:3131 No description found for return value of 'mon_get_kn_priv'
Warning: .../fs/resctrl/rdtgroup.c:3523 No description found for return value of 'cbm_ensure_valid'
Warning: .../fs/resctrl/monitor.c:238 No description found for return value of 'resctrl_find_cleanest_closid'
Add the missing return descriptions.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/1c50b9f7c73251c007133590986f127e1af57780.1775576382.git.reinette.chatre@intel.com
|
|
Similar to vma_flags_test(), we have previously renamed vma_desc_test() to
vma_desc_test_any(). Now that is in place, we can reintroduce
vma_desc_test() to explicitly check for a single VMA flag.
As with vma_flags_test(), this is useful as often flag tests are against a
single flag, and vma_desc_test_any(flags, VMA_READ_BIT) reads oddly and
potentially causes confusion.
As with vma_flags_test() a combination of sparse and vma_flags_t being a
struct means that users cannot misuse this function without it getting
flagged.
Also update the VMA tests to reflect this change.
Link: https://lkml.kernel.org/r/3a65ca23defb05060333f0586428fe279a484564.1772704455.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Chunhai Guo <guochunhai@vivo.com>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hongbo Li <lihongbo22@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naohiro Aota <naohiro.aota@wdc.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Yue Hu <zbestahu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: vma flag tweaks".
The ongoing work around introducing non-system word VMA flags has
introduced a number of helper functions and macros to make life easier
when working with these flags and to make conversions from the legacy use
of VM_xxx flags more straightforward.
This series improves these to reduce confusion as to what they do and to
improve consistency and readability.
Firstly the series renames vma_flags_test() to vma_flags_test_any() to
make it abundantly clear that this function tests whether any of the flags
are set (as opposed to vma_flags_test_all()).
It then renames vma_desc_test_flags() to vma_desc_test_any() for the same
reason. Note that we drop the 'flags' suffix here, as
vma_desc_test_any_flags() would be cumbersome and 'test' implies a flag
test.
Similarly, we rename vma_test_all_flags() to vma_test_all() for
consistency.
Next, we have a couple of instances (erofs, zonefs) where we are now
testing for vma_desc_test_any(desc, VMA_SHARED_BIT) &&
vma_desc_test_any(desc, VMA_MAYWRITE_BIT).
This is silly, so this series introduces vma_desc_test_all() so these
callers can instead invoke vma_desc_test_all(desc, VMA_SHARED_BIT,
VMA_MAYWRITE_BIT).
We then observe that quite a few instances of vma_flags_test_any() and
vma_desc_test_any() are in fact only testing against a single flag.
Using the _any() variant here is just confusing - 'any' of single item
reads strangely and is liable to cause confusion.
So in these instances the series reintroduces vma_flags_test() and
vma_desc_test() as helpers which test against a single flag.
The fact that vma_flags_t is a struct and that vma_flag_t utilises sparse
to avoid confusion with vm_flags_t makes it impossible for a user to
misuse these helpers without it getting flagged somewhere.
The series also updates __mk_vma_flags() and functions invoked by it to
explicitly mark them always inline to match expectation and to be
consistent with other VMA flag helpers.
It also renames vma_flag_set() to vma_flags_set_flag() (a function only
used by __mk_vma_flags()) to be consistent with other VMA flag helpers.
Finally it updates the VMA tests for each of these changes, and introduces
explicit tests for vma_flags_test() and vma_desc_test() to assert that
they behave as expected.
This patch (of 6):
On reflection, it's confusing to have vma_flags_test() and
vma_desc_test_flags() test whether any comma-separated VMA flag bit is
set, while also having vma_flags_test_all() and vma_test_all_flags()
separately test whether all flags are set.
Firstly, rename vma_flags_test() to vma_flags_test_any() to eliminate this
confusion.
Secondly, since the VMA descriptor flag functions are becoming rather
cumbersome, prefer vma_desc_test*() to vma_desc_test_flags*(), and also
rename vma_desc_test_flags() to vma_desc_test_any().
Finally, rename vma_test_all_flags() to vma_test_all() to keep the
VMA-specific helper consistent with the VMA descriptor naming convention
and to help avoid confusion vs. vma_flags_test_all().
While we're here, also update whitespace to be consistent in helper
functions.
Link: https://lkml.kernel.org/r/cover.1772704455.git.ljs@kernel.org
Link: https://lkml.kernel.org/r/0f9cb3c511c478344fac0b3b3b0300bb95be95e9.1772704455.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Suggested-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Chunhai Guo <guochunhai@vivo.com>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hongbo Li <lihongbo22@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naohiro Aota <naohiro.aota@wdc.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Yue Hu <zbestahu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Configuring the io_alloc_cbm interface requires an explicit domain ID for each
cache domain. On systems with high core counts and numerous cache clusters,
this requirement becomes cumbersome for automation and management tasks that
aim to apply a uniform policy.
Introduce a wildcard domain ID selector "*" for the io_alloc_cbm interface.
This enables users to set the same Capacity Bitmask (CBM) across all cache
domains in a single operation.
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://patch.msgid.link/20260325001159.447075-3-atomlin@atomlin.com
|
|
The last_cmd_status file is intended to report details about the most recent
resctrl filesystem operation, specifically to aid in diagnosing failures.
However, when parsing io_alloc_cbm, if a user provides a domain ID that does
not exist in the resource, the operation fails with -EINVAL without updating
last_cmd_status. This results in inconsistent behaviour where the system call
returns an error, but last_cmd_status misleadingly reports "ok", leaving the
user unaware that the failure was caused by an invalid domain ID.
Write an error message to last_cmd_status when the target domain ID cannot
be found.
Fixes: 28fa2cce7a83 ("fs/resctrl: Introduce interface to modify io_alloc capacity bitmasks")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://patch.msgid.link/20260325001159.447075-2-atomlin@atomlin.com
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
|
|
We will be shortly removing the vm_flags_t field from vm_area_desc so we
need to update all mmap_prepare users to only use the dessc->vma_flags
field.
This patch achieves that and makes all ancillary changes required to make
this possible.
This lays the groundwork for future work to eliminate the use of
vm_flags_t in vm_area_desc altogether and more broadly throughout the
kernel.
While we're here, we take the opportunity to replace VM_REMAP_FLAGS with
VMA_REMAP_FLAGS, the vma_flags_t equivalent.
No functional changes intended.
Link: https://lkml.kernel.org/r/fb1f55323799f09fe6a36865b31550c9ec67c225.1769097829.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Damien Le Moal <dlemoal@kernel.org> [zonefs]
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Yury Norov <ynorov@nvidia.com>
Cc: Chris Mason <clm@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
L3 monitor features are enumerated during resctrl initialization and
rmid_ptrs[] that tracks all RMIDs and depends on the number of supported
RMIDs is allocated during this time.
Telemetry monitor features are enumerated during first resctrl mount and
may support a different number of RMIDs compared to L3 monitor features.
Delay allocation and initialization of rmid_ptrs[] until first mount.
Since the number of RMIDs cannot change on later mounts, keep the same set of
rmid_ptrs[] until resctrl_exit(). This is required because the limbo handler
keeps running after resctrl is unmounted and needs to access rmid_ptrs[]
as it keeps tracking busy RMIDs after unmount.
Rename routines to match what they now do:
dom_data_init() -> setup_rmid_lru_list()
dom_data_exit() -> free_rmid_lru_list()
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
resctrl assumes that only the L3 resource supports monitor events, so it
simply takes the rdt_resource::num_rmid from RDT_RESOURCE_L3 as the system's
number of RMIDs.
The addition of telemetry events in a different resource breaks that
assumption.
Compute the number of available RMIDs as the minimum value across all
mon_capable resources (analogous to how the number of CLOSIDs is computed
across alloc_capable resources).
Note that mount time enumeration of the telemetry resource means that
this number can be reduced. If this happens, then some memory will
be wasted as the allocations for rdt_l3_mon_domain::mbm_states[] and
rdt_l3_mon_domain::rmid_busy_llc created during resctrl initialization will
be larger than needed.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
closid_num_dirty_rmid[] and rmid_ptrs[] are allocated together during resctrl
initialization and freed together during resctrl exit.
Telemetry events are enumerated on resctrl mount so only at resctrl mount will
the number of RMID supported by all monitoring resources and needed as size
for rmid_ptrs[] be known.
Separate closid_num_dirty_rmid[] and rmid_ptrs[] allocation and free in
preparation for rmid_ptrs[] to be allocated on resctrl mount.
Keep the rdtgroup_mutex protection around the allocation and free of
closid_num_dirty_rmid[] as ARM needs this to guarantee memory ordering.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
There are now three meanings for "number of RMIDs":
1) The number for legacy features enumerated by CPUID leaf 0xF. This is the
maximum number of distinct values that can be loaded into MSR_IA32_PQR_ASSOC.
Note that systems with Sub-NUMA Cluster mode enabled will force scaling down
the CPUID enumerated value by the number of SNC nodes per L3-cache.
2) The number of registers in MMIO space for each event. This is enumerated in
the XML files and is the value initialized into event_group::num_rmid.
3) The number of "hardware counters" (this isn't a strictly accurate
description of how things work, but serves as a useful analogy that does
describe the limitations) feeding to those MMIO registers. This is enumerated
in telemetry_region::num_rmids returned by intel_pmt_get_regions_by_feature().
Event groups with insufficient "hardware counters" to track all RMIDs are
difficult for users to use, since the system may reassign "hardware counters"
at any time. This means that users cannot reliably collect two consecutive
event counts to compute the rate at which events are occurring.
Disable such event groups by default. The user may override this with
a command line "rdt=" option. In this case limit an under-resourced event
group's number of possible monitor resource groups to the lowest number of
"hardware counters".
Scan all enabled event groups and assign the RDT_RESOURCE_PERF_PKG resource
"num_rmid" value to the smallest of these values as this value will be used
later to compare against the number of RMIDs supported by other resources to
determine how many monitoring resource groups are supported.
N.B. Change type of resctrl_mon::num_rmid to u32 to match its usage and the
type of event_group::num_rmid so that min(r->num_rmid, e->num_rmid) won't
complain about mixing signed and unsigned types.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
The L3 resource has several requirements for domains. There are per-domain
structures that hold the 64-bit values of counters, and elements to keep
track of the overflow and limbo threads.
None of these are needed for the PERF_PKG resource. The hardware counters
are wide enough that they do not wrap around for decades.
Define a new rdt_perf_pkg_mon_domain structure which just consists of the
standard rdt_domain_hdr to keep track of domain id and CPU mask.
Update resctrl_online_mon_domain() for RDT_RESOURCE_PERF_PKG. The only action
needed for this resource is to create and populate domain directories if a
domain is added while resctrl is mounted.
Similarly resctrl_offline_mon_domain() only needs to remove domain directories.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Clearing a monitor group's mon_data directory is complicated because of the
support for Sub-NUMA Cluster (SNC) mode.
Refactor the SNC case into a helper function to make it easier to add support
for a new telemetry resource.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Population of a monitor group's mon_data directory is unreasonably complicated
because of the support for Sub-NUMA Cluster (SNC) mode.
Split out the SNC code into a helper function to make it easier to add support
for a new telemetry resource.
Move all the duplicated code to make and set owner of domain directories into
the mon_add_all_files() helper and rename to _mkdir_mondata_subdir().
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Introduce intel_aet_read_event() to read telemetry events for resource
RDT_RESOURCE_PERF_PKG. There may be multiple aggregators tracking each
package, so scan all of them and add up all counters. Aggregators may return
an invalid data indication if they have received no records for a given RMID.
The user will see "Unavailable" if none of the aggregators on a package
provide valid counts.
Resctrl now uses readq() so depends on X86_64. Update Kconfig.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Every event group has a private copy of the data of all telemetry event
aggregators (aka "telemetry regions") tracking its feature type. Included
may be regions that have the same feature type but tracking different GUID
from the event group's.
Traverse the event group's telemetry region data and mark all regions that
are not usable by the event group as unusable by clearing those regions'
MMIO addresses. A region is considered unusable if:
1) GUID does not match the GUID of the event group.
2) Package ID is invalid.
3) The enumerated size of the MMIO region does not match the expected
value from the XML description file.
Hereafter any telemetry region with an MMIO address is considered valid for
the event group it is associated with.
Enable all the event group's events as long as there is at least one usable
region from where data for its events can be read. Enabling of an event can
fail if the same event has already been enabled as part of another event
group. It should never happen that the same event is described by different
GUID supported by the same system so just WARN (via resctrl_enable_mon_event())
and skip the event.
Note that it is architecturally possible that some telemetry events are only
supported by a subset of the packages in the system. It is not expected that
systems will ever do this. If they do the user will see event files in resctrl
that always return "Unavailable".
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
The resctrl file system layer passes the domain, RMID, and event id to the
architecture to fetch an event counter.
Fetching a telemetry event counter requires additional information that is
private to the architecture, for example, the offset into MMIO space from
where the counter should be read.
Add mon_evt::arch_priv that architecture can use for any private data related
to the event. The resctrl filesystem initializes mon_evt::arch_priv when the
architecture enables the event and passes it back to architecture when needing
to fetch an event counter.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
The telemetry event aggregators of the Intel Clearwater Forest CPU support two
RMID-based feature types: "energy" with GUID 0x26696143¹, and "perf" with
GUID 0x26557651².
The event counter offsets in an aggregator's MMIO space are arranged in groups
for each RMID.
E.g., the "energy" counters for GUID 0x26696143 are arranged like this:
MMIO offset:0x0000 Counter for RMID 0 PMT_EVENT_ENERGY
MMIO offset:0x0008 Counter for RMID 0 PMT_EVENT_ACTIVITY
MMIO offset:0x0010 Counter for RMID 1 PMT_EVENT_ENERGY
MMIO offset:0x0018 Counter for RMID 1 PMT_EVENT_ACTIVITY
...
MMIO offset:0x23F0 Counter for RMID 575 PMT_EVENT_ENERGY
MMIO offset:0x23F8 Counter for RMID 575 PMT_EVENT_ACTIVITY
After all counters there are three status registers that provide indications
of how many times an aggregator was unable to process event counts, the time
stamp for the most recent loss of data, and the time stamp of the most recent
successful update.
MMIO offset:0x2400 AGG_DATA_LOSS_COUNT
MMIO offset:0x2408 AGG_DATA_LOSS_TIMESTAMP
MMIO offset:0x2410 LAST_UPDATE_TIMESTAMP
Define event_group structures for both of these aggregator types and define
the events tracked by the aggregators in the file system code.
PMT_EVENT_ENERGY and PMT_EVENT_ACTIVITY are produced in fixed point format.
File system code must output as floating point values.
¹https://github.com/intel/Intel-PMT/blob/main/xml/CWF/OOBMSM/RMID-ENERGY/cwf_aggregator.xml
²https://github.com/intel/Intel-PMT/blob/main/xml/CWF/OOBMSM/RMID-PERF/cwf_aggregator.xml
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
domains
The feature to sum event data across multiple domains supports systems with
Sub-NUMA Cluster (SNC) mode enabled. The top-level monitoring files in each
"mon_L3_XX" directory provide the sum of data across all SNC nodes sharing an
L3 cache instance while the "mon_sub_L3_YY" sub-directories provide the event
data of the individual nodes.
SNC is only associated with the L3 resource and domains and as a result the
flow handling the sum of event data implicitly assumes it is working with
the L3 resource and domains.
Reading of telemetry events does not require to sum event data so this feature
can remain dedicated to SNC and keep the implicit assumption of working with
the L3 resource and domains.
Add a WARN to where the implicit assumption of working with the L3 resource
is made and add comments on how the structure controlling the event sum
feature is used.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Add a new PERF_PKG resource and introduce package level scope for monitoring
telemetry events so that CPU hotplug notifiers can build domains at the
package granularity.
Use the physical package ID available via topology_physical_package_id()
to identify the monitoring domains with package level scope. This enables
user space to use:
/sys/devices/system/cpu/cpuX/topology/physical_package_id
to identify the monitoring domain a CPU is associated with.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Enumeration of Intel telemetry events is an asynchronous process involving
several mutually dependent drivers added as auxiliary devices during the
device_initcall() phase of Linux boot. The process finishes after the probe
functions of these drivers completes. But this happens after
resctrl_arch_late_init() is executed.
Tracing the enumeration process shows that it does complete a full seven
seconds before the earliest possible mount of the resctrl file system (when
included in /etc/fstab for automatic mount by systemd).
Add a hook for use by telemetry event enumeration and initialization and
run it once at the beginning of resctrl mount without any locks held.
The architecture is responsible for any required locking.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20260105191711.GBaVwON5nZn-uO6Sqg@fat_crate.local
|
|
resctrl assumes that all monitor events can be displayed as unsigned decimal
integers.
Hardware architecture counters may provide some telemetry events with greater
precision where the event is not a simple count, but is a measurement of some
sort (e.g. Joules for energy consumed).
Add a new argument to resctrl_enable_mon_event() for architecture code to
inform the file system that the value for a counter is a fixed-point value
with a specific number of binary places.
Only allow architecture to use floating point format on events that the file
system has marked with mon_evt::is_floating_point which reflects the contract
with user space on how the event values are displayed.
Display fixed point values with values rounded to ceil(binary_bits * log10(2))
decimal places. Special case for zero binary bits to print "{value}.0".
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
resctrl assumes that monitor events can only be read from a CPU in the
cpumask_t set of each domain. This is true for x86 events accessed with an
MSR interface, but may not be true for other access methods such as MMIO.
Introduce and use flag mon_evt::any_cpu, settable by architecture, that
indicates there are no restrictions on which CPU can read that event. This
flag is not supported by the L3 event reading that requires to be run on a CPU
that belongs to the L3 domain of the event being read.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Reading monitoring event data from MMIO requires more context than the event id
to be able to read the correct memory location. struct mon_evt is the appropriate
place for this event specific context.
Prepare for addition of extra fields to struct mon_evt by changing the calling
conventions to pass a pointer to the mon_evt structure instead of just the
event id.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
With the arrival of monitor events tied to new domains associated with a
different resource it would be clearer if the L3 resource specific functions
are more accurately named.
Rename three groups of functions:
Functions that allocate/free architecture per-RMID MBM state information:
arch_domain_mbm_alloc() -> l3_mon_domain_mbm_alloc()
mon_domain_free() -> l3_mon_domain_free()
Functions that allocate/free filesystem per-RMID MBM state information:
domain_setup_mon_state() -> domain_setup_l3_mon_state()
domain_destroy_mon_state() -> domain_destroy_l3_mon_state()
Initialization/exit:
rdt_get_mon_l3_config() -> rdt_get_l3_mon_config()
resctrl_mon_resource_init() -> resctrl_l3_mon_resource_init()
resctrl_mon_resource_exit() -> resctrl_l3_mon_resource_exit()
Ensure kernel-doc descriptions of these functions' return values are present
and correctly formatted.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
The upcoming telemetry event monitoring is not tied to the L3 resource and
will have a new domain structure.
Rename the L3 resource specific domain data structures to include "l3_"
in their names to avoid confusion between the different resource specific
domain structures:
rdt_mon_domain -> rdt_l3_mon_domain
rdt_hw_mon_domain -> rdt_hw_l3_mon_domain
No functional change.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Convert the whole call sequence from mon_event_read() to resctrl_arch_rmid_read() to
pass resource independent struct rdt_domain_hdr instead of an L3 specific domain
structure to prepare for monitoring events in other resources.
This additional layer of indirection obscures which aspects of event counting depend
on a valid domain. Event initialization, support for assignable counters, and normal
event counting implicitly depend on a valid domain while summing of domains does not.
Split summing domains from the core event counting handling to make their respective
dependencies obvious.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Carve out the L3 resource specific event reading code into a separate helper
to support reading event data from a new monitoring resource.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Up until now, all monitoring events were associated with the L3 resource and it
made sense to use the L3 specific "struct rdt_mon_domain *" argument to functions
operating on domains.
Telemetry events will be tied to a new resource with its instances represented
by a new domain structure that, just like struct rdt_mon_domain, starts with
the generic struct rdt_domain_hdr.
Prepare to support domains belonging to different resources by changing the
calling convention of functions operating on domains. Pass the generic header
and use that to find the domain specific structure where needed.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Every resctrl resource has a list of domain structures. struct rdt_ctrl_domain
and struct rdt_mon_domain both begin with struct rdt_domain_hdr with
rdt_domain_hdr::type used in validity checks before accessing the domain of
a particular type.
Add the resource id to struct rdt_domain_hdr in preparation for a new monitoring
domain structure that will be associated with a new monitoring resource. Improve
existing domain validity checks with a new helper domain_header_is_valid()
that checks both domain type and resource id. domain_header_is_valid() should
be used before every call to container_of() that accesses a domain structure.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add support for AMD's Smart Data Cache Injection feature which allows
for direct insertion of data from I/O devices into the L3 cache, thus
bypassing DRAM and saving its bandwidth; the resctrl side of the
feature allows the size of the L3 used for data injection to be
controlled
- Add Intel Clearwater Forest to the list of CPUs which support
Sub-NUMA clustering
- Other fixes and cleanups
* tag 'x86_cache_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Update bit_usage to reflect io_alloc
fs/resctrl: Introduce interface to modify io_alloc capacity bitmasks
fs/resctrl: Modify struct rdt_parse_data to pass mode and CLOSID
fs/resctrl: Introduce interface to display io_alloc CBMs
fs/resctrl: Add user interface to enable/disable io_alloc feature
fs/resctrl: Introduce interface to display "io_alloc" support
x86,fs/resctrl: Implement "io_alloc" enable/disable handlers
x86,fs/resctrl: Detect io_alloc feature
x86/resctrl: Add SDCIAE feature in the command line options
x86/cpufeatures: Add support for L3 Smart Data Cache Injection Allocation Enforcement
fs/resctrl: Consider sparse masks when initializing new group's allocation
x86/resctrl: Support Sub-NUMA Cluster (SNC) mode on Clearwater Forest
|
|
The "shareable_bits" and "bit_usage" resctrl files associated with cache
resources give insight into how instances of a cache is used.
Update the annotated capacity bitmasks displayed by "bit_usage" to include the
cache portions allocated for I/O via the "io_alloc" feature. "shareable_bits"
is a global bitmask of shareable cache with I/O and can thus not present the
per-domain I/O allocations possible with the "io_alloc" feature. Revise the
"shareable_bits" documentation to direct users to "bit_usage" for accurate
cache usage information.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/e02a0d424129fd7f3e45822a559b1c614ae4652a.1762995456.git.babu.moger@amd.com
|
|
The io_alloc feature in resctrl enables system software to configure the
portion of the cache allocated for I/O traffic. When supported, the
io_alloc_cbm file in resctrl provides access to capacity bitmasks (CBMs)
allocated for I/O devices.
Enable users to modify io_alloc CBMs by writing to the io_alloc_cbm resctrl
file when the io_alloc feature is enabled.
Mirror the CBMs between CDP_CODE and CDP_DATA when CDP is enabled to present
consistent I/O allocation information to user space.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/67609641b03ccfba18a8ee0bf9dbd1f3dcbecda3.1762995456.git.babu.moger@amd.com
|
|
parse_cbm() requires resource group mode and CLOSID to validate the capacity
bitmask (CBM). It is passed via struct rdtgroup in struct rdt_parse_data.
The io_alloc feature also uses CBMs to indicate which portions of cache are
allocated for I/O traffic. The CBMs are provided by user space and need to be
validated the same as CBMs provided for general (CPU) cache allocation.
parse_cbm() cannot be used as-is since io_alloc does not have rdtgroup context.
Pass the resource group mode and CLOSID directly to parse_cbm() via struct
rdt_parse_data, instead of through the rdtgroup struct, to facilitate calling
parse_cbm() to verify the CBM of the io_alloc feature.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/f8ec6ab5cf594d906a3fe75f56793d5fbd63f38f.1762995456.git.babu.moger@amd.com
|
|
Introduce the "io_alloc_cbm" resctrl file to display the capacity bitmasks
(CBMs) that represent the portions of each cache instance allocated
for I/O traffic on a cache resource that supports the "io_alloc" feature.
io_alloc_cbm resides in the info directory of a cache resource, for example,
/sys/fs/resctrl/info/L3/. Since the resource name is part of the path, it
is not necessary to display the resource name as done in the schemata file.
When CDP is enabled, io_alloc routes traffic using the highest CLOSID
associated with the CDP_CODE resource and that CLOSID becomes unusable for
the CDP_DATA resource. The highest CLOSID of CDP_CODE and CDP_DATA resources
will be kept in sync to ensure consistent user interface. In preparation for
this, access the CBMs for I/O traffic through highest CLOSID of either
CDP_CODE or CDP_DATA resource.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/55a3ff66a70e7ce8239f022e62b334e9d64af604.1762995456.git.babu.moger@amd.com
|
|
AMD's SDCIAE forces all SDCI lines to be placed into the L3 cache portions
identified by the highest-supported L3_MASK_n register, where n is the maximum
supported CLOSID.
To support this, when io_alloc resctrl feature is enabled, reserve the highest
CLOSID exclusively for I/O allocation traffic making it no longer available for
general CPU cache allocation.
Introduce user interface to enable/disable io_alloc feature and encourage users
to enable io_alloc only when running workloads that can benefit from this
functionality. On enable, initialize the io_alloc CLOSID with all usable CBMs
across all the domains.
Since CLOSIDs are managed by resctrl fs, it is least invasive to make "io_alloc
is supported by maximum supported CLOSID" part of the initial resctrl fs
support for io_alloc. Take care to minimally (only in error messages) expose
this use of CLOSID for io_alloc to user space so that this is not required from
other architectures that may support io_alloc differently in the future.
When resctrl is mounted with "-o cdp" to enable code/data prioritization,
there are two L3 resources that can support I/O allocation: L3CODE and
L3DATA. From resctrl fs perspective the two resources share a CLOSID and
the architecture's available CLOSID are halved to support this.
The architecture's underlying CLOSID used by SDCIAE when CDP is enabled is the
CLOSID associated with the CDP_CODE resource, but from resctrl's perspective
there is only one CLOSID for both CDP_CODE and CDP_DATA. CDP_DATA is thus not
usable for general (CPU) cache allocation nor I/O allocation.
Keep the CDP_CODE and CDP_DATA I/O alloc status in sync to avoid any confusion
to user space. That is, enabling io_alloc on CDP_CODE does so on CDP_DATA and
vice-versa, and keep the I/O allocation CBMs of CDP_CODE and CDP_DATA in sync.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/c7d3037795e653e22b02d8fc73ca80d9b075031c.1762995456.git.babu.moger@amd.com
|
|
Introduce the "io_alloc" resctrl file to the "info" area of a cache resource,
for example /sys/fs/resctrl/info/L3/io_alloc. "io_alloc" indicates support for
the "io_alloc" feature that allows direct insertion of data from I/O
devices into the cache.
Restrict exposing support for "io_alloc" to the L3 resource that is the only
resource where this feature can be backed by AMD's L3 Smart Data Cache
Injection Allocation Enforcement (SDCIAE). With that, the "io_alloc" file is
only visible to user space if the L3 resource supports "io_alloc".
Doing so makes the file visible for all cache resources though, for example
also L2 cache (if it supports cache allocation). As a consequence, add
capability for file to report expected "enabled" and "disabled", as well as
"not supported".
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/e8b116a8f424128b227734bb1d433c14af478d90.1762995456.git.babu.moger@amd.com
|
