| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mostly the usual clk driver updates and new SoC additions plus
non-critical data fixes for things that weren't used yet.
One thing that's new here in the core is SSC spread spectrum support
(SSC) in the clk provider API. The idea is that DT authors will
configure SSC for certain clks and they'll be configured at clk
provider registration time or when a consumer device is probed,
similar to how we handle assigned clk rates or parents.
On the clk driver side we have Qualcomm adding almost half the diff
because they add support for 4 different SoCs and then a long tail of
other SoCs like Mediatek, Renesas, Rockchip, SpaceMiT, etc. add more
SoC support this time around. Luckily it's mostly clk data for these
new SoCs because the actual clk_ops are already there. Beyond the new
drivers we get all the little fixups for more compilation coverage or
usage of more modern APIs. That all looks normal.
Finally, I kinda buried the lede, I'm bringing on Brian and Jerome to
help out with maintaining the clk subsystem. The current working model
is already semi-distributed in that silicon vendors typically take
care of their drivers and send me pull requests but I'm becoming a
bottleneck for new drivers and core framework review because this has
become a 100% volunteer effort on my part.
Mike is stepping down after all these years (thanks Mike!) and that
jump started the conversation around finding co-maintainers. Brian and
Jerome have graciously offered to help me with the work load, meaning
in the future they'll be sending pull requests and committing directly
to the clk.git tree. They've both been around on the list for a while,
I've met them both in person, and they've been making changes to the
core clk framework along with helping review patches so I'm pretty
confident this will work well.
Core:
- devm_clk_bulk_get_enable() consumer API
- devm_clk_hw_register_composite_pdata() provider API
- Spread Spectrum Clock (SSC) support via DT bindings and provider APIs
- Divider clk rounding improved (and tested)
New Drivers:
- Cix Sky1 audio subsystem (AUDSS)
- UltraRISC DP1000
- MediaTek MT8173 MFG_TOP
- Si549
- Aspeed AST2700 PECI
- Airoha EN7523 PCIe
- Rockchip RV1106
- Mobileye EyeQ7H
- Qualcomm Maili GCC, TCSR, RPMh, and video clks
- Qualcomm Shikra GCC, RPM, GPU, display, and audio clks
- Qualcomm Nord display and graphics clks
- Qualcomm Glymur camera and EVA clks
- Qualcomm Hawi video clks
- Amlogic A9 AO and peripheral clks
- Renesas R-Car X5H (R8A78000) CPG"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (269 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is fully initialized
clk: ti: Make sure clk_init_data is fully initialized
MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
Drop Michael Turquette's clk maintainer entry
clk: ti: composite: resolve parent clocks by DT index, not by name
clk: ti: mux: resolve parent clocks by DT index, not by name
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
dt-bindings: clock: ti,keystone-gate: Convert to DT schema
dt-bindings: clock: ti: Convert APLL clock to DT schema
clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
dt-bindings: clock: ti,clockdomain: Convert to DT schema
dt-bindings: clock: Correct white-space style
clk: samsung: Don't include <linux/mod_devicetable.h>
clk: at91: Read "reg" with helper
clk: renesas: Add R-Car X5H CPG driver
clk: rockchip: rk3576: fix source muxes for SPI0..SPI4
clk: rockchip: Add clock controller for the RV1106
dt-bindings: clock: rockchip: Add RV1106 CRU support
dt-bindings: clock: Document Renesas R-Car X5H Clock Pulse Generator
...
|
|
* clk-pile: (111 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is fully initialized
clk: ti: Make sure clk_init_data is fully initialized
MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
Drop Michael Turquette's clk maintainer entry
clk: ti: composite: resolve parent clocks by DT index, not by name
clk: ti: mux: resolve parent clocks by DT index, not by name
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
dt-bindings: clock: ti,keystone-gate: Convert to DT schema
dt-bindings: clock: ti: Convert APLL clock to DT schema
clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
dt-bindings: clock: ti,clockdomain: Convert to DT schema
dt-bindings: clock: Correct white-space style
clk: tegra: set up proper EMC clock implementation for Tegra114
clk: clocking-wizard: remove 20kHz restriction
clk: clocking-wizard: optimize clock search
clk: clocking-wizard: fix clock difference detection
clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
clk: tegra: support 48MHz clock for pll_p_out1
...
* clk-microchip:
clk: at91: Read "reg" with helper
|
|
into clk-pile
Pull clk patches from Brian Masney:
- New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),
UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree
bindings. Si549 support was added to the existing si544 driver.
- New clock and reset support for the Aspeed AST2700 PECI controller and Airoha
EN7523 PCIe PERSTOUT reset lines.
- The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to
the existing optional variant, and exports
devm_clk_hw_register_composite_pdata() for modular drivers.
- Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1
support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL
charge pump/lock parameter programming during dynamic reconfiguration.
- Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in
the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted
gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on
registration failure, a prepare reference leak in the palmas driver,
unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in
pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a
clocking-wizard clock difference detection bug.
- Various cleanups across tegra, st, and mvebu providers to stop misusing the
consumer clock API, along with other minor fixes and improvements.
Signed-off-by: Brian Masney <bmasney@redhat.com>
* tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits)
clk: tegra: set up proper EMC clock implementation for Tegra114
clk: clocking-wizard: remove 20kHz restriction
clk: clocking-wizard: optimize clock search
clk: clocking-wizard: fix clock difference detection
clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
clk: tegra: support 48MHz clock for pll_p_out1
clk: aspeed: add AST2700 PECI clock
dt-bindings: clock: ast2700: add PECI clock
clk: mediatek: Add mt8173-mfgtop driver
dt-bindings: clock: mediatek: Add mt8173 mfgtop
clk: tegra: clean-up simple provider misuse of the consumer API
clk: st: clean-up simple provider misuse of the consumer API
clk: mvebu: clean-up simple provider misuse of the consumer API
clk: remove conditional return with no effect
clk: Add devm_clk_bulk_get_enable()
clk: en7523: add support for dedicated PCIe PERSTOUT reset
dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT
arm64: dts: cix: sky1: add audss cru
reset: cix: add sky1 audss auxiliary reset driver
...
|
|
Pull clk patches picked up by Brian Masney:
Here's various improvements and fixes for the clk subsystem that was posted prior
to the opening of the last merge window.
- Add spread spectrum clock (SSC) support to the clk framework, including a new
assigned-clock-sscs devicetree property and clk_hw_set_spread_spectrum()
API with KUnit tests (Peng Fan)
- Add SCMI clock OEM extensions for the i.MX95 clock driver and introduce a
common SCMI clock header (Peng Fan)
- Add clock, reset, and devicetree bindings for the ESWIN EIC7700 HSP clock and
reset generator (Xuyang Dong)
- Add clk_determine_rate_noop() helper for clock drivers that can do any rate,
and convert existing open-coded implementations across hisilicon, imx, qcom,
renesas, rp1, samsung, scpi, sprd, mediatek phy, and mediatek pmdomain
drivers (Brian Masney)
- Add kernel-doc documentation for struct clk_core and the core clock flags,
and wire up clk identifiers into the documentation build (Brian Masney)
- Fix clk_divider_bestdiv() returning the minimum rate instead of the maximum
rate for large rate requests, with KUnit tests (Lad Prabhakar)
- Fix Nuvoton MA35D1 PLL frequency calculation including ignored div_u64
return values, incorrect PLL_CTL1_FRAC bit field width, and broken
determine_rate logic (Joey Lu)
- Support unique clock names for multi-socket Tegra platforms (Jon Hunter)
- Allow COMPILE_TEST builds for HiSilicon clock drivers (Rosen Penev)
- Various fixes and cleanups from Akari Tsuyukusa, Alexander A. Klimov,
Brian Masney, David Carlier, David Laight, Min zhang, Myeonghun Pak,
Pavel Löbl, Randy Dunlap, Rob Herring, Rosen Penev, Uwe Kleine-König,
William Theesfeld, Xuyang Dong, and Yu-Chun Lin
Signed-off-by: Brian Masney <bmasney@redhat.com>
[sboyd@kernel.org: Fix allmodconfig modpost failure in scmi]
* tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux: (53 commits)
pmdomain: mediatek: mtk-mfg: use clk_determine_rate_noop()
pmdomain: mediatek: airoha: use clk_determine_rate_noop()
phy: mediatek: phy-mtk-hdmi-mt2701: use clk_determine_rate_noop()
clk: sprd: use clk_determine_rate_noop()
clk: scpi: use clk_determine_rate_noop()
clk: samsung: acpm: use clk_determine_rate_noop()
clk: rp1: use clk_determine_rate_noop()
clk: renesas: rzg2l-cpg: use clk_determine_rate_noop()
clk: qcom: smd-rpm: use clk_determine_rate_noop()
clk: qcom: rpmh: use clk_determine_rate_noop()
clk: qcom: rpm: use clk_determine_rate_noop()
clk: imx: scu: use clk_determine_rate_noop()
clk: hisilicon: hi3660-stub: use clk_determine_rate_noop()
clk: add clk_determine_rate_noop()
clk: imx: scu: drop redundant init.ops variable assignment
clk: test: convert constants to use HZ_PER_MHZ
docs: clk: include some identifiers to keep documentation up to date
clk: add kernel docs for struct clk_core
clk: add kernel docs for the core flags
clk: hisilicon: allow COMPILE_TEST builds
...
|
|
clk-mobileye
Pull Mobileye clk driver updates from Benoît Monin:
- Add support for Mobileye EyeQ7H
This patchset brings the support of the Other Logic Blocks (OLB)
found in the first Mobileye SoC based on the RISC-V architecture, the
EyeQ7H. Despite the change from MIPS to RISC-V, the Other Logic Blocks
provide similar clock and reset functions to the controllers of the
chip. This series introduces the device tree bindings of the SoC and
the necessary changes to the clock and reset eyeq drivers.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
* tag 'clk-eyeq7h-7.3' of ssh://github.com/benoitmonin/linux:
clk: eyeq: Add EyeQ7H compatibles
clk: eyeq: Drop PLL, dividers, and fixed factors structs
clk: eyeq: Convert clocks declaration to eqc_clock
clk: eyeq: Introduce a generic clock type
clk: eyeq: Prefix the PLL registers with the PLL type
clk: fixed-factor: Export __clk_hw_register_fixed_factor()
clk: fixed-factor: Rework initialization with parent clocks
reset: eyeq: Add EyeQ7H compatibles
dt-bindings: soc: mobileye: Add EyeQ7H OLB
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add an auxiliary reset controller driver for the AUDSS CRU. Sixteen
software reset lines for audio subsystem peripherals are controlled
through one register in the CRU register map.
The driver is created by the AUDSS clock platform driver and registers
the reset controller on the CRU device node.
Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Add support for the reset controllers found in the EyeQ7H OLB. For
this, three new types of reset domain are added to the driver.
The EQR_EYEQ7H_ACRP reset domain is similar to the EQR_EYEQ5_ACRP domain,
sharing the same register address calculation but featuring a different
register layout. When writing to the register, MBIST bits are set to
zero to ensure normal device operation.
The EQR_EYEQ7H_CFG reset domain is similar to the EQR_EYEQ5_PCIE domain,
with two bits per device instead of one. These two bits, clock enable and
nreset, are kept in sync when asserting and deasserting the device reset.
The EQR_EYEQ7H_ACC reset domain is similar to the EQR_EYEQ6H_SARCR domain,
with a different registers layout and no busy waiting.
Alongside these new reset domains, add EQR_NB_DOM_TYPES at the end of the
eqr_domain_type enumeration and use it to declare the eqr_timings array.
This ensures that we have the expected number of entries when using the
timings in eqr_busy_wait_locked().
Add and order the auxiliary_device_id entries in eqr_id_table.
Originally-by: Sari Khoury <sari.khoury@mobileye.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
|
|
Ahead of reworking the reference counting logic for platform devices,
encapsulate the assignment of the OF node from another device for
dynamically allocated platform devices with the provided helper.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-19-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pza/linux into arm/fixes
Reset controller fixes for v7.2
* Fix the SpacemiT K3 USB2 AHB reset bit location.
* Add missing COMBOPHY_RESET definition for Altera Agilex5.
* Fix the reset-sunxi initialization error path to release the
requested memory region.
* Correct polarity of MIPI CSI resets on NXP i.MX8MQ. The corresponding
fix in the CSI2 driver, 6d79bb8fd2aa, is already contained in v7.2-rc1.
* tag 'reset-fixes-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pza/linux:
reset: imx7: Correct polarity of MIPI CSI resets on i.MX8MQ
reset: sunxi: fix memory region leak on ioremap failure
dt-bindings: reset: altr: add COMBOPHY_RESET for Agilex5
reset: spacemit: k3: fix USB2 ahb reset
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
On i.MX8MQ, the MIPI CSI reset lines are active-low and not self-clearing.
Writing '0' asserts reset and it remains asserted until explicitly
deasserted by software.
This driver previously treated the MIPI CSI reset signals as active-high,
which led to incorrect reset assert/deassert sequencing. This issue was
exposed by commit 6d79bb8fd2aa ("media: imx8mq-mipi-csi2: Explicitly
release reset").
Fix this by reflecting the correct reset polarity and ensuring proper
reset handling.
Fixes: c979dbf59987 ("reset: imx7: Add support for i.MX8MQ IP block variant")
Cc: stable@vger.kernel.org # 6d79bb8fd2aa: media: imx8mq-mipi-csi2: Explicitly release reset
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Robby Cai <robby.cai@nxp.com>
Reviewed-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
In sunxi_reset_init(), when ioremap() fails, the memory region obtained
via request_mem_region() is not released, leading to a resource leak.
Add an err_mem_region label to properly release the memory region before
freeing the data structure.
Fixes: 8f1ae77f4666 ("reset: Add Allwinner SoCs Reset Controller Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
According to SpacemiT K3's updated docs, the USB2 ahb reset and USB2 bus
clock enable bit was wrongly swapped, the correct one should be:
Register : APMU_USB_CLK_RES_CTRL
bit[1] : usb2_port_bus_clk_en
bit[0] : usb2_port_ahb_rstn
Fixes: a0e0c2f8c5f3 ("reset: spacemit: k3: Decouple composite reset lines")
Reported-by: Junzhong Pan <panjunzhong@linux.spacemit.com>
Signed-off-by: Yixun Lan <dlan@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add auxiliary driver to support ESWIN EIC7700 high-speed peripherals
system. The reset controller is created using the auxiliary device
framework and set up in the clock driver.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Our parent driver (clk-eyeq) now does the
device_set_of_node_from_dev(dev, dev->parent)
call through the newly introduced devm_auxiliary_device_create() helper.
Doing it again in the reset-eyeq probe would be redundant.
Drop both the WARN_ON() and the device_set_of_node_from_dev() call.
Also fix the following comment that talks about "our newfound OF node".
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC updates from Arnd Bergmann:
"These are the contents that arrived during the easter vacation and
didn't make it into the last 7.0 bugfixes or the first set of branches
for the merge window. Aside from a reset controller bugfix and an
update to the MAINTAINERS entry, this is all devicetree changes.
The Marvell devicetree updates contain the usual minor updates and
bugfixes, along with a two larger but trivial patches to drop unused
dtsi files, the single broadcom fix addresses a build time warning
introduced during the merge window.
The freescale, amlogic, and apple changes missed the last fixes branch
for 7.0"
* tag 'soc-late-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number
arm64: dts: amlogic: meson-axg: Add missing cache information to cpu0
arm64: dts: amlogic: t7: khadas-vim4: fix board model name
arm64: dts: amlogic: Fix GIC register ranges for Amlogic T7
arm64: dts: amlogic: t7: khadas-vim4: fix memory layout for 8GB RAM
arm64: dts: amlogic: s6: Drop CPU masks from GICv3 PPI interrupts
Documentation/process: maintainer-soc: Document purpose of defconfigs
Documentation/process: maintainer-soc: Trim from trivial ask-DT
ARM: dts: bcm4709: fix bus range assignment
arm64: dts: apple: Fix spelling error
dt-bindings: Update Sasha Finkelstein's email address
mailmap: Update Sasha Finkelstein's email address
arm64: dts: marvell: armada-37xx: swap PHYs' order in USB3 controller node
arm64: dts: marvell: armada-37xx: use 'usb2-phy' in USB3 controller's phy-names
arm64: dts: imx8mm-tqma8mqml: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mn-tqma8mqnl: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mm-emtop-som: Correct PAD settings for PMIC_nINT
reset: amlogic: t7: Fix null reset ops
arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after months of effort from Brian Masney. Now the only option is to
use determine_rate(), which is good because that takes a struct
argument instead of just a couple unsigned longs, allowing us to
easily modify the way we determine and set rates in the clk tree.
Beyond that core framework change we've got the typical pile of new
SoC clk driver additions, fixes for clk data and/or adding missing
clks because the consumer driver using those clks wasn't ready, etc.
The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
pretty normal.
Core:
- Remove the round_rate() clk op (yay!)
New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for the
Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller support
for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
clk: visconti: pll: initialize clk_init_data to zero
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
...
|
|
* arm/fixes:
arm64: dts: imx8mm-tqma8mqml: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mn-tqma8mqnl: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mm-emtop-som: Correct PAD settings for PMIC_nINT
reset: amlogic: t7: Fix null reset ops
arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-ultra-mach-sbc: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-sr-som: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-nitrogen-som: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-aristainetos3a-som-v1: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-edm-g: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-icore-mx8mp: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-navqp: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-debix-som-a: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-debix-model-a: Correct PAD settings for PMIC_nINT
dt-bindings: arm64: add Marvell 7k COMe boards
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- Support for Mobileye EyeQ6Lplus
- Cleanups and fixes
* tag 'mips_7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
MIPS/mtd: Handle READY GPIO in generic NAND platform data
MIPS/input: Move RB532 button to GPIO descriptors
MIPS: validate DT bootargs before appending them
MIPS: Alchemy: Remove unused forward declaration
MAINTAINERS: Mobileye: Add EyeQ6Lplus files
MIPS: config: add eyeq6lplus_defconfig
MIPS: Add Mobileye EyeQ6Lplus evaluation board dts
MIPS: Add Mobileye EyeQ6Lplus SoC dtsi
clk: eyeq: Add Mobileye EyeQ6Lplus OLB
clk: eyeq: Adjust PLL accuracy computation
clk: eyeq: Skip post-divisor when computing PLL frequency
pinctrl: eyeq5: Add Mobileye EyeQ6Lplus OLB
pinctrl: eyeq5: Use match data
reset: eyeq: Add Mobileye EyeQ6Lplus OLB
MIPS: Add Mobileye EyeQ6Lplus support
dt-bindings: soc: mobileye: Add EyeQ6Lplus OLB
dt-bindings: mips: Add Mobileye EyeQ6Lplus SoC
MIPS: dts: loongson64g-package: Switch to Loongson UART driver
mips: pci-mt7620: rework initialization procedure
mips: pci-mt7620: add more register init values
...
|
|
Declare the two reset domains found in the EyeQ6Lplus OLB and add
them to the data matched by 'mobileye,eyeq6lplus-olb' compatible.
Those reset domains are identical to those present in the EyeQ5
OLB, so no changes are needed to support them.
Also select reset-eyeq for all EYEQ SoCs instead of listing each one
individually, as it is needed by all Mobileye EyeQ SoC.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tenstorrent/linux into clk-tenstorrent
Pull Tenstorrent clk driver updates from Drew Fustini:
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC
* tag 'tenstorrent-clk-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tenstorrent/linux:
clk: tenstorrent: Add Atlantis clock controller driver
reset: tenstorrent: Add reset controller for Atlantis
dt-bindings: clk: tenstorrent: Add tenstorrent,atlantis-prcm-rcpu
|
|
Reset controller fixes for v7.0, part 2
* Decouple spacemit K3 reset lines that were incorrectly coupled
together as one, but are in fact separate resets in hardware.
* Fix a double free in the reset_add_gpio_aux_device() error path.
This has already been fixed on reset/next by commit a9b95ce36de4
("reset: gpio: add a devlink between reset-gpio and its consumer").
* Fix the MODULE_AUTHOR string in the rzg2l-usbphy-ctrl driver.
We merge this into reset/next to resolve a conflict between commits
a9b95ce36de4 ("reset: gpio: add a devlink between reset-gpio and its
consumer") and fbffb8c7c7bb ("reset: gpio: fix double free in
reset_add_gpio_aux_device() error path").
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The RZ/V2H USB2 PHY requires control of the VBUS selection line
(VBENCTL) through a mux controller described in the device tree as
"mux-controller". This change adds support for registering the
rzv2h-usb-vbenctl auxiliary driver during probe.
This enables proper management of USB2.0 VBUS source selection on
platforms using the RZ/V2H SoC.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Replace raw MMIO accesses (readl/writel) with regmap_read() and
regmap_multi_reg_write() via devm_regmap_init_mmio().
Drop the manual spinlock as regmap provides internal locking.
Replace the custom rzv2h_usb2phy_regval struct with the standard
reg_sequence, and encode assert/deassert sequences as reg_sequence
arrays rather than individual scalar fields in the of_data
descriptor.
Use the reg_sequence .delay_us field to encode the 11 µs post-assert
delay, replacing the explicit usleep_range(11, 20) call in
rzv2h_usbphy_reset_assert().
Select REGMAP_MMIO in Kconfig.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Fix missing reset ops causing kernel null pointer dereference.
This SOC's reset is currently not used yet.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Fixes: fb4c31587adf ("reset: amlogic: add auxiliary reset driver support")
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Drop unnecessary double quote.
Reported-by: Pavel Machek <pavel@nabladev.com>
Closes: https://lore.kernel.org/all/acJbYxKGAB4lxGQr@duo.ucw.cz
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The driver was disabling the USB2 PHY clock immediately after register
initialization in probe() and after each reset operation. This left the
PHY unclocked even though it must remain active for USB functionality.
The behavior appeared to work only when another driver
(e.g., USB controller) had already enabled the clock, making operation
unreliable and hardware-dependent. In configurations where this driver
is the sole clock user, USB functionality would fail.
Fix this by:
- Enabling the clock once in probe() via pm_runtime_resume_and_get()
- Removing all pm_runtime_put() calls from assert/deassert/status
- Registering a devm cleanup action to release the clock at removal
- Removed rzv2h_usbphy_assert_helper() and its call in
rzv2h_usb2phy_reset_probe()
This ensures the PHY clock remains enabled for the entire device lifetime,
preventing instability and aligning with hardware requirements.
Cc: stable@vger.kernel.org
Fixes: e3911d7f865b ("reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P)")
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Instead of grouping several different reset lines into one composite
reset, decouple them to individual ones which make it more aligned
with underlying hardware. And for DWC USB driver, it will match well
with the number of the reset property in the DT bindings.
The DWC3 USB host controller in K3 SoC has three reset lines - AHB, VCC,
PHY. The PCIe controller also has three reset lines - DBI, Slave, Master.
Also three reset lines each for UCIE and RCPU block.
As an agreement with maintainer, the reset IDs has been rearranged as
contiguous number but keep most part unchanged to avoid break patches
which already sent to mailing list. The changes of DT binding header file
and reset driver are merged together as one single commit to avoid
git-bisect breakage.
Fixes: 938ce3b16582 ("reset: spacemit: Add SpacemiT K3 reset driver")
Fixes: 216e0a5e98e5 ("dt-bindings: soc: spacemit: Add K3 reset support and IDs")
Signed-off-by: Yixun Lan <dlan@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
When __auxiliary_device_add() fails, reset_add_gpio_aux_device()
calls auxiliary_device_uninit(adev).
The device release callback reset_gpio_aux_device_release() frees
adev, but the current error path then calls kfree(adev) again,
causing a double free.
Keep kfree(adev) for the auxiliary_device_init() failure path, but
avoid freeing adev after auxiliary_device_uninit().
Fixes: 5fc4e4cf7a22 ("reset: gpio: use software nodes to setup the GPIO lookup")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Fix a malformed MODULE_AUTHOR macro in the RZ/G2L USBPHY control driver
where the author's name and opening angle bracket were missing, leaving
only the email address with a stray closing >. Correct it to the standard
Name <email> format.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Simplify allocation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Fix a logic bug in reset_controller_register() where we set
fwnode_reset_n_cells to 1 if fwnode is set and fwnode_xlate is not but
we do it after assigning of_fwnode_handle(of_node) to fwnode.
Modify the logic to: assign fwnode from of_node if applicable, if fwnode
is still not set, try to get it from the device and only then check
of_xlate and fwnode_xlate and either assign fwnode_reset_n_cells from OF
or default to fwnode_reset_simple_xlate and fwnode_reset_n_cells = 1.
Fixes: ba8dbbb14b7e ("reset: convert the core API to using firmware nodes")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/0b72286b-33dd-4bc9-8c0e-161c2f4baed8@sirena.org.uk/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Correct an accidental whitespace change.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603100730.J3pi4xqi-lkp@intel.com/
Fixes: 9035073d0ef1 ("reset: convert reset core to using firmware nodes")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Adds Atlantis Reset Controller driver, which shares the same regmap as
prcm ( clock controller).
This version of the reset controller driver covers resets from the RCPU
prcm.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
Add support for the resets on Cix's Sky1 SoC.
There are two reset controllers on Cix Sky1 Soc. One is located in S0
domain, and the other is located in S5 domain.
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
With reset core now being able to work with firmware nodes, we can make
reset-gpio node-agnostic and drop any OF dependencies.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
With everything else now in place, we can convert the remaining parts of
the reset subsystem to becoming fwnode-agnostic - meaning it will work
with all kinds of firmware nodes, not only devicetree.
To that end: extend struct reset_controller_dev with fields taking
information relevant for using firmware nodes (which mirrors what we
already do for OF-nodes) and limit using of_ APIs only to where it's
absolutely necessary (mostly around the of_xlate callback).
For backward compatibility of existing drivers we still support OF-nodes
but firmware nodes become the preferred method.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
In order to simplify the commit converting the internals of reset core
to using firmware nodes, first convert the user-facing API. Modify the
signature of the core consumer functions but leave the specialized
wrappers as is to avoid modifying users for now.
No functional change intended.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Start the conversion of reset core to using firmware nodes by reworking
of_reset_control_get_count(). Unfortunately there is no fwnode-based
alternative to of_count_phandle_with_args() so we have to hand-code it.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Currently we use a single, global mutex - misleadingly names
reset_list_mutex - to protect the global list of reset devices,
per-controller list of reset control handles and also internal fields of
struct reset_control. Locking can be made a lot more fine-grained if we
use a separate mutex for serializing operations on the list AND
accessing the reset control handle.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Currently we use a single, global mutex - misleadingly names
reset_list_mutex - to protect the global list of reset devices,
per-controller list of reset control handles and also internal fields of
struct reset_control. Locking can be made a lot more fine-grained if we
use a separate mutex for serializing operations on the list AND
accessing the reset controller device.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Except for the reset-gpio, all reset drivers use device tree - and as
such - benefit from the device links set up by driver core. This means,
that no reset supplier will be unbound before all its consumers have
been. For this reason, nobody bothered making the reset core resiliant
to the object life-time issues that are plagueing the kernel. In this
case: reset control handles referencing the reset provider device with
no serialization or NULL-pointer checking.
We now want to make the reset core fwnode-agnostic but before we do, we
must make sure it can survive unbinding of suppliers with consumers
still holding reset control handles.
To that end: use SRCU to protect the rcdev pointer inside struct
reset_control. We protect all sections using the pointer with SRCU
read-only critical sections and synchronize SRCU after every
modification of the pointer.
This is in line with what the GPIO subsystem does and what the proposed
revocable API tries to generalize. When and if the latter makes its way
into the kernel, reset core could potentially also be generalized to use
it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Simplify the locking code in reset core by using lock guard from
linux/cleanup.h.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
We don't need to know the IDA value outside of the function that creates
the auxiliary reset-gpio device. Simplify error handling by folding it
into reset_create_gpio_aux_device().
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
While we implement an empty .release() callback for reset-gpio (driver
core requires it), this function will never actually be called as nobody
ever removes the device and the last reference is not dropped anywhere.
This is by design - once created, the reset-gpio device stays in memory.
Make the .release() callback emit a warning, should it ever be called
due to a programming bug.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
There's no user of the driver data so don't needlessly assign it.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The of_args field of struct reset_controller_dev was introduced to allow
the reset-gpio driver to pass the phandle arguments back to reset core.
The thing is: it doesn't even have to do it. The core sets the platform
data of the auxiliary device *AND* has access to it later on during the
lookup. This means the field is unneeded and all can happen entirely in
reset core.
Remove the field from the public header and don't set it in
reset-gpio.c. Retrieve the platform data in reset core when needed
instead.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The device that requests the reset control managed by the reset-gpio
device is effectively its consumer but the devlink is only established
between it and the GPIO controller exposing the reset pin. Add a devlink
between the consumer of the reset control and its supplier. This will
allow us to simplify the GPIOLIB code managing shared GPIOs when
handling the corner case of reset-gpio and gpiolib-shared interacting.
While at it and since we need to store the address of the auxiliary
device: don't allocate memory for the device separately but fold it into
struct reset_gpio_lookup instead.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
priv->rc.of_node is never set in reset core. Even if it were: tasking
the reset-gpio driver with controlling the reference count of an OF node
set up in reset core is a weird inversion of responsability. But it's
also wrong in that the underlying device never actually gets removed so
the node should not be put at all and especially not at driver detach.
Remove the devres action.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
