| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 7.3-rc1.
Lots of driver work for new devices and systems, and many other minor
fixes and updates. Included in here are:
- Thunderbolt subsystem driver updates and additions
- typec driver updates and additions
- usb gadget fixes all over the place, seems like people are finally
paying attention to these drivers for some reason
- xhci driver updates and fixes based on lots of reports
- usb-serial driver updates and additions
- new device ids
- other minor USB driver updates and fixes
All of these have been in linux-next for a while with no reported issues"
* tag 'usb-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (163 commits)
usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
usb: typec: hd3ss3220: fix VBUS regulator error message
usb: usbfs: fix use-after-free of usb_device in usbdev_release()
usb: gadget: u_audio: Fix use-after-free on sound card disconnect
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
usb: gadget: f_tcm: keep port count until LUN teardown completes
usb: usbtest: disable dynamic ID support
usb: typec: tcpci: pass correct rx_type to tcpm_pd_receive()
USB: c67x00: fix use-after-free in c67x00_add_iso_urb()
usb: typec: ucsi: use UCSI_TIMEOUT_MS for sync command completion
usb: gadget: snps_udc_plat: clean up PHY on probe deferral
usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()
usb: dwc2: gadget: Exit partial power down state when changing USB pull-up
usb: gadget: f_fs: Fix Use-After-Free in AIO error path
usb: gadget: f_fs: Prevent deadlock during ep0 read loop
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
usb: gadget: midi2: remove default configfs groups on teardown
usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init()
usb: typec: thunderbolt: Disable work before freeing tbt on remove
usb: xhci: Handle bogus TRB pointers in Missed Service Error events
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull kthread vfs updates from Christian Brauner:
"This stops kernel threads from sharing filesystem state with
userspace. This work is about 3 cycles old and has been in -next
for about that time.
When the kernel boots init_task creates PID 1 and then kthreadd. From
that point every kthread and PID 1 share the same fs_struct. That is
why pivot_root() has to rewrite the fs_struct of all kthreads. The
rewriting exists so that kthreads can use init's filesystem state when
they want to. It also means userspace can move the ground out from
under the kernel.
PID 1 now gets a completely separate fs_struct. All kthreads are
anchored in a private SB_KERNMOUNT instance of nullfs that cannot be
mounted on and cannot be used to follow other mounts. Userspace init
can no longer affect kthread filesystem state and kthreads can no
longer affect userspace fs state without explicit opting in to that.
Path lookup from a kthread now fails by default. It makes it
deliberately hard to offload security sensitive operations into init's
filesystem state from a kthread.
Places that legitimately need to look something up there opt in
through the new scoped_with_init_fs() which temporarily overrides the
caller's fs_struct with init's. usermodehelpers remain the only kernel
tasks that genuinely share init's filesystem state, since they execute
random binaries in the root filesystem (excellent...).
The visible result is that /proc/2/root is a nullfs with an empty
mountinfo while /proc/1/root is the real root"
* tag 'vfs-7.3-rc1.kthread' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
initramfs_test: use test init/exit hooks to override init fs
fs: stop rewriting paths for PF_EXITING | PF_DUMPCORE
fs: stop rewriting kthread fs structs
fs: start all kthreads in nullfs
nullfs: make nullfs multi-instance
devtmpfs: create private mount namespace
fs: add umh argument to struct kernel_clone_args
fs: stop sharing fs_struct between init_task and pid 1
af_unix: use scoped_with_init_fs() for coredump socket lookup
initramfs: use scoped_with_init_fs() for rootfs unpacking
pnfs/blocklayout: use scoped_with_init_fs() for SCSI device lookup
ksmbd: use scoped_with_init_fs() for VFS path operations
ksmbd: use scoped_with_init_fs() for filesystem info path lookup
ksmbd: use scoped_with_init_fs() for share path resolution
fs: use scoped_with_init_fs() for kernel_read_file_from_path_initns()
coredump: use scoped_with_init_fs() for coredump path resolution
btrfs: use scoped_with_init_fs() for update_dev_time()
scsi: target: use scoped_with_init_fs() for APTPL metadata
scsi: target: use scoped_with_init_fs() for ALUA metadata
crypto: ccp: use scoped_with_init_fs() for SEV file access
...
|
|
tcm_usbg_drop_nexus() permits session removal once tpg_port_count
reaches zero. However, usbg_port_unlink() currently decrements that
count from the fabric_pre_unlink() callback, before core_dev_del_lun()
waits for active se_lun references to drain.
If removal of the last LUN races a nexus removal, the latter can observe
a zero port count and call target_remove_session(). This frees
sess_cmd_map while an in-flight struct usbg_cmd, including its work item,
can still be accessed.
Overlapping the last-LUN unlink with nexus removal reproduces this
lifetime violation as a DEBUG_OBJECTS "free active" warning for
usbg_cmd_work, followed by a target-core BUG/Oops.
The generic target-core unlink path has no callback after
core_dev_del_lun() completes. Add an optional fabric_post_unlink()
callback and use it for the f_tcm port count. The count now remains
nonzero until core_dev_del_lun() has finished draining active LUN
references, preventing nexus removal from freeing the session during
command completion.
Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT")
Cc: stable@vger.kernel.org
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Link: https://patch.msgid.link/20260807060733.3186624-1-shuangpeng.kernel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When target_get_sess_cmd() fails during session shutdown because
percpu_ref_tryget_live() returns false, the command keeps the
se_cmd->cmd_cnt pointer that __target_init_cmd() assigned earlier
without owning a reference. Final release through
target_release_cmd_kref() then issues an unmatched percpu_ref_put().
Commit 8e288be8606a ("scsi: target: Pass in cmd counter to use during
cmd setup") moved the cmd_cnt assignment ahead of the reference
acquisition. Clear se_cmd->cmd_cnt whenever the initial
target_get_sess_cmd() fails in target_init_cmd() and
target_submit_tmr(), so release performs exactly one matching put per
acquired reference.
Fixes: 8e288be8606a ("scsi: target: Pass in cmd counter to use during cmd setup")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260722-reference-count-underflow-in-target-v1-1-63ab664f12fd@nvidia.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In the iblock_execute_pr_out() function, PRO_PREEMPT,
PRO_PREEMPT_AND_ABORT, and PRO_RELEASE all perform callback capability
checks through ops->pr_clear. The error check allows unimplemented hooks
to pass through the gate, resulting dereferencing a NULL function
pointer.
Check whether the hooks that need to be called are supported.
Fixes: 394f81184882 ("scsi: target: Add block PR support to iblock")
Signed-off-by: TanZheng <tanzheng@kylinos.cn>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260724075850.280699-1-kensanya@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT
parameter list with transport_kmap_data_sg() and parses the destination
TransportID with target_parse_pr_out_transport_id(). For an iSCSI
TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns
the ISID in iport_ptr as a raw pointer into that mapped buffer.
The function then unmaps the buffer with transport_kunmap_data_sg() before
dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and
core_scsi3_alloc_registration(). When the parameter list spans more than
one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses
vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual
address backing iport_ptr is torn down and every subsequent dereference is
a use-after-free read of the unmapped region.
Keep the parameter list mapped until iport_ptr is no longer needed: drop
the early transport_kunmap_data_sg() and unmap once on the success path,
right before returning. The error paths already unmap through the existing
"if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs
on every post-map error exit because buf is no longer cleared early. Only
reads of the mapping happen while spinlocks are held; the map and unmap
calls remain outside any lock. The sibling caller
core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it
and is left unchanged.
Fixes: 4949314c7283 ("target: Allow control CDBs with data > 1 page")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Link: https://patch.msgid.link/20260610042245.35473-1-hexlabsecurity@proton.me
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move()
hand the raw PERSISTENT RESERVE OUT parameter buffer to
target_parse_pr_out_transport_id() without telling it how many bytes are
valid. For an iSCSI TransportID (FORMAT CODE 01b),
iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with
an unbounded strstr() (and on the error path prints the name with a further
unbounded "%s"). An initiator can submit a TransportID whose iSCSI name
contains neither a ",i,0x" substring nor a NUL terminator, filling the
parameter list to its end, so the scan runs off the end of the buffer.
When the parameter list spans more than one page the buffer is a multi-page
vmap (transport_kmap_data_sg()), so the over-read walks into the trailing
vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It
is reachable by any fabric that delivers a PR OUT to a device exported
through an iSCSI TPG, including a guest via vhost-scsi.
Pass the number of received bytes down to the parser and validate the iSCSI
TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up
front: reject it if it is below the spc4r17 minimum or larger than the
received buffer, then bound the separator search, the ISID walk and the
name copy by that length. This is the length check the callers already
perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len
against tpdl, core_scsi3_emulate_register_and_move() validates it against
data_length), moved ahead of the scan. Also drop the unbounded "%s" of the
unterminated name.
Add per-format explicit name-length checks before copying into i_str,
rather than silently truncating with min_t: for FORMAT CODE 00b reject if
the descriptor body (tid_len - 4 bytes) cannot fit in
i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion
(from &buf[4] up to the separator) cannot fit. Both checks make the bounds
intent explicit at each format branch.
While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x"
separator sits at the very end of the descriptor: that leaves an empty ISID
and points the returned port nexus pointer at buf + tid_len, one past the
descriptor, which the registration code (__core_scsi3_locate_pr_reg(),
__core_scsi3_alloc_registration()) then dereferences as the ISID string --
the same over-read of the parameter buffer for a malformed descriptor.
Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Link: https://patch.msgid.link/20260611-b4-disp-9f20739e-v6-1-f6630e2aae44@proton.me
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use scoped_with_init_fs() to temporarily override current->fs for
the filp_open() call in __core_scsi3_write_aptpl_to_file() so the
path lookup happens in init's filesystem context.
__core_scsi3_write_aptpl_to_file() ← core_scsi3_update_and_write_aptpl()
← PR command handlers ← target_queued_submit_work() ← kworker
Link: https://patch.msgid.link/20260601-work-kthread-nullfs-v4-9-77ee053060e0@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
core_alua_write_tpg_metadata() can be called from both kthread and user
process context. Use scoped_with_init_fs() to temporarily override
current->fs for the filp_open() call when running in kthread context so
the path lookup happens in init's filesystem context.
core_alua_write_tpg_metadata() ← core_alua_update_tpg_primary_metadata()
← core_alua_do_transition_tg_pt() ← target_queued_submit_work() ←
kworker (target submission workqueue)
Also reached synchronously from configfs (user process) via the
alua_access_state and alua_tg_pt_offline attributes:
core_alua_write_tpg_metadata() ← core_alua_update_tpg_primary_metadata()
← core_alua_do_transition_tg_pt() ← core_alua_do_port_transition() ←
target_tg_pt_gp_alua_access_state_store()
In that case current->fs must not be overridden as the path should
resolve against the calling process's filesystem root.
Link: https://patch.msgid.link/20260601-work-kthread-nullfs-v4-8-77ee053060e0@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Pull in outstanding commits from 7.1 branch.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
tcm_loop_target_reset is supposed to handle all the LUNs on a target but
it's only doing a TMR_LUN_RESET so only that one LUN is handled. This
will cause us to return early while IOs to other LUNs are still hung in
lower layers. This just removes the target reset handler for the driver
because LIO doesn't support target resets and for the common case where
this is run from the scsi-ml error hamdler we have already tried an
abort and lun reset so waiting again is most likely useless.
Fixes: 1333eee56cdf ("scsi: target: tcm_loop: Drain commands in target_reset handler")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260530052349.5134-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A constant-time memory comparison is more suitable than plain memcmp()
for authentication digest comparison. CHAP digests use an
authenticator-provided random challenge, so any timing side-channel
shouldn't be easily exploitable.
Reported-by: Sashiko (gemini/gemini-3.1-pro-preview)
Link: https://sashiko.dev/#/patchset/20260521151121.808477-1-hossu.alexandru%40gmail.com
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Link: https://patch.msgid.link/20260605122019.24146-3-ddiss@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A mutual CHAP handshake requires target processing of an initiator-sent
CHAP_I identifier. The RFC 3720 specification states:
11.1.4. Challenge Handshake Authentication Protocol (CHAP)
...
CHAP_A=<A> CHAP_I=<I> CHAP_C=<C>
...
Where N, (A,A1,A2), I, C, and R are (correspondingly) the Name,
Algorithm, Identifier, Challenge, and Response as defined in
[RFC1994], N is a text string, A,A1,A2, and I are numbers
CHAP_I parsing currently calls extract_param(), which returns the
@identifier string (stripped of any 0b/0B or 0x/0X prefix) and a @type
which indicates DECIMAL, HEX, or BASE64 encoding (based on any stripped
prefix).
Any HEX encoded CHAP_I string is further processed via:
ret = kstrtoul(&identifier[2], 0, &id);
This is incorrect for two reasons:
* The @identifier string has already been stripped of the 0x/0X prefix,
so skipping the first two bytes omits part of the number.
* The kstrtoul() call specifies a base of 0, which will see
&identifier[2] parsed as a decimal, unless a '0x' or (octal) '0' is
erroneously present at that offset.
Fix this by passing the (zero-offset) identifier string to kstrtoul()
along with a base=16 parameter. Also add an explicit error handler for
BASE64 encoding.
Hex-encoded CHAP_I handling can be testing using the libiscsi EncodedI
test linked below.
Reported-by: Sashiko (gemini/gemini-3.1-pro-preview)
Link: https://sashiko.dev/#/patchset/20260521151121.808477-1-hossu.alexandru%40gmail.com
Link: https://github.com/sahlberg/libiscsi/pull/473
Fixes: 85db7391310b ("scsi: target: iscsi: Validate CHAP_R length before base64 decode")
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260605122019.24146-2-ddiss@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
chap_server_compute_hash() allocates client_digest as
kzalloc(chap->digest_size) and then, for BASE64-encoded responses,
passes chap_r directly to chap_base64_decode() without checking whether
the input length could produce more than digest_size bytes of output.
chap_base64_decode() writes to the destination unconditionally as long
as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and
the "0b" prefix stripped by extract_param(), up to 127 base64 characters
can reach the decoder. 127 characters decode to 95 bytes. For SHA-256
(digest_size=32) this overflows client_digest by 63 bytes; for MD5
(digest_size=16) the overflow is 79 bytes.
The length check at line 344 fires after the write has already happened.
The HEX branch in the same switch statement already validates the length
up front. Apply the same approach to the BASE64 branch: strip trailing
base64 padding characters, then reject any input whose data length
exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder.
Stripping trailing '=' before the comparison handles both padded and
unpadded encodings. chap_base64_decode() already returns early on '=',
so the full original string is still passed to the decoder unchanged.
The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is
kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at
CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1
base64 characters reach the decoder. The maximum decoded size,
DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than
CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is
added at the call site to document this.
Fixes: 1e5733883421 ("scsi: target: iscsi: Support base64 in CHAP")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandru Hossu <hossu.alexandru@gmail.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Link: https://patch.msgid.link/20260521151121.808477-1-hossu.alexandru@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iscsi_encode_text_output() concatenates "key=value\0" records into
login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer
allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call
sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check
the remaining buffer capacity:
*length += sprintf(output_buf, "%s=%s", er->key, er->value);
*length += 1;
output_buf = textbuf + *length;
The 8192-byte ceiling at iscsi_target_check_login_request() bounds the
*input* Login PDU payload, but a single PDU can carry up to 2048 minimal
four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte
"a=NotUnderstood\0" output record via iscsi_add_notunderstood_response().
2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB
heap overrun in the kmalloc-8k slab.
The fix introduces a static iscsi_encode_text_record() helper that uses
snprintf() with a per-call bounds check against the remaining buffer,
and threads a u32 textbuf_size parameter through
iscsi_encode_text_output(). Both call sites in
iscsi_target_handle_csg_zero() (PHASE_SECURITY) and
iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass
MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls
iscsi_release_extra_responses() to drop queued records, and returns -1;
both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR /
ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning,
so the initiator sees an explicit failed-login response rather than a
silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL
caller did that; the PHASE_SECURITY caller is converted to the same
shape.)
Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Tested-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iscsit_handle_text_cmd()
Two latent bugs in the Text-phase handler, both present since the
original LIO integration in commit e48354ce078c ("iscsi-target: Add
iSCSI fabric support for target v4.1"):
1) DataDigest CRC buffer overread (4 bytes past text_in).
text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then
incremented by ISCSI_CRC_LEN to make room for the received DataDigest
in the iovec, but the same (now-bumped) rx_size is passed as the
buffer length to iscsit_crc_buf():
if (conn->conn_ops->DataDigest) {
...
rx_size += ISCSI_CRC_LEN;
}
...
if (conn->conn_ops->DataDigest) {
data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL);
iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so
when DataDigest is negotiated it reads 4 bytes past the end of the
text_in allocation. KASAN reproduces this directly on the unpatched
mainline tree as slab-out-of-bounds in crc32c() called from the Text
PDU path. The OOB bytes feed crc32c() and are then compared against
the initiator-supplied checksum, so the value does not flow back to
the attacker, but the kernel does read past the buffer on every Text
PDU with DataDigest=CRC32C.
Fix by passing the actual padded payload length
(ALIGN(payload_length, 4)) that was used for the kzalloc().
2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest
drop.
On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler
silently drops the PDU and lets the initiator plug the CmdSN gap:
kfree(text_in);
return 0;
cmd->text_in_ptr still points at the freed buffer. The next Text
Request on the same ITT re-enters iscsit_setup_text_cmd(), which
unconditionally does
kfree(cmd->text_in_ptr);
cmd->text_in_ptr = NULL;
freeing the same pointer a second time. Session teardown via
iscsit_release_cmd() has the same shape and hits the same double-free
if the connection is dropped before a second Text Request arrives.
On an unmodified mainline tree the bug-1 CRC overread fires first on
the initial valid Text Request and perturbs the subsequent state, so
#4 was isolated by building a kernel with only the bug-1 hunk of this
patch applied plus temporary printk() observability around the three
relevant kfree() sites. The observability prints are not part of
this patch. On that build, a three-PDU Text Request sequence after
login produces two back-to-back splats:
BUG: KASAN: double-free in iscsit_setup_text_cmd+0x??
BUG: KASAN: double-free in iscsit_release_cmd+0x??
showing the same pointer freed in the ERL>0 drop path and again in
iscsit_setup_text_cmd() (next Text Request on the same ITT) and once
more in iscsit_release_cmd() (session teardown). On distro kernels
with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free
becomes a remote kernel BUG(); on non-hardened kernels it corrupts
the slab freelist.
Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop
path. With both hunks applied #4 is directly observable on the stock
tree without observability printks; fixing bug-1 alone would mask #4
less, not more, so the hunks are submitted together.
Both fixes are one-liners. The Text PDU state machine is unchanged and
the wire protocol is unaffected.
Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Tested-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The TCM_LOOP LUN creation process calls device_register() to create the
device, which in turn invokes tcm_loop_driver_probe() registered with
the TCM_LOOP bus to create and register the scsi_host. However, if the
scsi_host memory allocation fails or scsi_add_host() fails, the
device_register() process still returns success. Subsequently, when the
user binds the LUN to a specific backend device, it accesses the NULL or
freed scsi_host.
Crash Call Trace:
RIP: 0010:scsi_is_host_device+0x7/0x20
scsi_alloc_target+0x32/0x2c0
__scsi_add_device+0x41/0xf0
scsi_add_device+0xd/0x30
tcm_loop_port_link+0x25/0x50 [tcm_loop]
target_fabric_port_link+0x9c/0xb0 [target_core_mod]
...
This issue is fixed by:
1. Setting the tcm_loop_hba's scsi_host to NULL, if scsi_add_host()
fails.
2. Checking the tcm_loop_hba's scsi_host after device_register().
3. Checking the tcm_loop_hba's scsi_host in tcm_loop_driver_remove().
Fixes: 3703b2c5d041 ("[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module")
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260424013923.25998-1-kanie@linux.alibaba.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in remaining commits from 7.1/scsi-queue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If ecdb_ahdr->ahslength is zero, two bugs follow:
kmalloc(be16_to_cpu(ecdb_ahdr->ahslength) + 15, ...)
allocates 15 bytes, but the immediately following memcpy writes
ISCSI_CDB_SIZE (16) bytes into it, a one-byte heap overflow. Also:
memcpy(cdb + ISCSI_CDB_SIZE, ecdb_ahdr->ecdb,
be16_to_cpu(ecdb_ahdr->ahslength) - 1);
(u16)0 - 1 promotes to (int)-1 which converts to SIZE_MAX as size_t,
causing a massive out-of-bounds write.
Reject ahslength == 0 with ISCSI_REASON_PROTOCOL_ERROR before the kmalloc.
Also reject ahslength values that exceed the actual AHS buffer advertised.
Fixes: 8f1f7d297bce ("scsi: target: iscsi: Add support for extended CDB AHS")
Signed-off-by: Carlos Bilbao <carlos.bilbao@kernel.org>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://patch.msgid.link/20260415040728.187680-1-carlos.bilbao@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).
The substantive core changes are adding a 'serial' sysfs attribute and
getting sd to support > PAGE_SIZE sectors"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits)
scsi: target: Don't validate ignored fields in PROUT PREEMPT
scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP
scsi: mpi3mr: Fix typo
scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
scsi: libsas: Delete unused to_dom_device() and to_dev_attr()
scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
scsi: lpfc: Update lpfc version to 15.0.0.0
scsi: lpfc: Add PCI ID support for LPe42100 series adapters
scsi: lpfc: Introduce 128G link speed selection and support
scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
scsi: lpfc: Update construction of SGL when XPSGL is enabled
scsi: lpfc: Remove deprecated PBDE feature
scsi: lpfc: Add REG_VFI mailbox cmd error handling
scsi: lpfc: Log MCQE contents for mbox commands with no context
scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
scsi: ufs: core: Make the header files self-contained
scsi: ufs: core: Remove an include directive from ufshcd-crypto.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
|
|
target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a
256-byte stack buffer, then will memcpy() cur_len bytes from that
buffer. snprintf() returns the length the output would have had, which
can exceed the buffer size when the fabric WWN is long because iSCSI IQN
names can be up to 223 bytes. The check at the memcpy() site only
guards the destination page write, not the source read, so memcpy() will
read past the stack buffer and copy adjacent stack contents to the sysfs
reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic()
will be triggered.
Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length
check to avoid buffer overflow") added the same bound to the
target_lu_gp_members_show() but the tg_pt_gp variant was missed so
resolve that here.
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026041159-garter-theft-3be0@gregkh
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Add shared memory zero-copy I/O support for ublk, bypassing per-I/O
copies between kernel and userspace by matching registered buffer
PFNs at I/O time. Includes selftests.
- Refactor bio integrity to support filesystem initiated integrity
operations and arbitrary buffer alignment.
- Clean up bio allocation, splitting bio_alloc_bioset() into clear fast
and slow paths. Add bio_await() and bio_submit_or_kill() helpers,
unify synchronous bi_end_io callbacks.
- Fix zone write plug refcount handling and plug removal races. Add
support for serializing zone writes at QD=1 for rotational zoned
devices, yielding significant throughput improvements.
- Add SED-OPAL ioctls for Single User Mode management and a STACK_RESET
command.
- Add io_uring passthrough (uring_cmd) support to the BSG layer.
- Replace pp_buf in partition scanning with struct seq_buf.
- zloop improvements and cleanups.
- drbd genl cleanup, switching to pre_doit/post_doit.
- NVMe pull request via Keith:
- Fabrics authentication updates
- Enhanced block queue limits support
- Workqueue usage updates
- A new write zeroes device quirk
- Tagset cleanup fix for loop device
- MD pull requests via Yu Kuai:
- Fix raid5 soft lockup in retry_aligned_read()
- Fix raid10 deadlock with check operation and nowait requests
- Fix raid1 overlapping writes on writemostly disks
- Fix sysfs deadlock on array_state=clear
- Proactive RAID-5 parity building with llbitmap, with
write_zeroes_unmap optimization for initial sync
- Fix llbitmap barrier ordering, rdev skipping, and bitmap_ops
version mismatch fallback
- Fix bcache use-after-free and uninitialized closure
- Validate raid5 journal metadata payload size
- Various cleanups
- Various other fixes, improvements, and cleanups
* tag 'for-7.1/block-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (146 commits)
ublk: fix tautological comparison warning in ublk_ctrl_reg_buf
scsi: bsg: fix buffer overflow in scsi_bsg_uring_cmd()
block: refactor blkdev_zone_mgmt_ioctl
MAINTAINERS: update ublk driver maintainer email
Documentation: ublk: address review comments for SHMEM_ZC docs
ublk: allow buffer registration before device is started
ublk: replace xarray with IDA for shmem buffer index allocation
ublk: simplify PFN range loop in __ublk_ctrl_reg_buf
ublk: verify all pages in multi-page bvec fall within registered range
ublk: widen ublk_shmem_buf_reg.len to __u64 for 4GB buffer support
xfs: use bio_await in xfs_zone_gc_reset_sync
block: add a bio_submit_or_kill helper
block: factor out a bio_await helper
block: unify the synchronous bi_end_io callbacks
xfs: fix number of GC bvecs
selftests/ublk: add read-only buffer registration test
selftests/ublk: add filesystem fio verify test for shmem_zc
selftests/ublk: add hugetlbfs shmem_zc test for loop target
selftests/ublk: add shared memory zero-copy test
selftests/ublk: add UBLK_F_SHMEM_ZC support for loop target
...
|
|
The PERSISTENT RESERVE OUT command's PREEMPT service action provides two
different functions: 1. preempting persistent reservations and 2.
removing registrations. In the latter case the spec says:
b) ignore the contents of the SCOPE field and the TYPE field;
The code currently validates the SCOPE and TYPE fields even when PREEMPT
is called to remove registrations.
This patch achieves spec compliance by validating the SCOPE and TYPE
fields only when they will actually be used.
To confirm my interpretation of the specification I tested against HPE
3PAR storage and found the TYPE field is indeed ignored in this case.
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260402180342.126583-1-stefanha@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The f_op->mmap interface is deprecated, so update uio_info to use its
successor, mmap_prepare.
Therefore, replace the uio_info->mmap hook with a new
uio_info->mmap_prepare hook, and update its one user, target_core_user,
to both specify this new mmap_prepare hook and also to use the new
vm_ops->mapped() hook to continue to maintain a correct udev->kref
refcount.
Then update uio_mmap() to utilise the mmap_prepare compatibility layer to
invoke this callback from the uio mmap invocation.
Link: https://lkml.kernel.org/r/157583e4477705b496896c7acd4ac88a937b8fa6.1774045440.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bodo Stroesser <bostroesser@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Long Li <longli@microsoft.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Richard Weinberger <richard@nod.at>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull in fixes to resolve mpi3mr merge conflict.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace the deprecated[1] strncpy() with strscpy() in
transport_dump_vpd_proto_id(), transport_dump_vpd_assoc(),
transport_dump_vpd_ident_type(), and transport_dump_vpd_ident().
All four functions follow the same pattern: a local
buf[VPD_TMP_BUF_SIZE] (254 bytes) is zeroed with memset(), populated
via sprintf()/snprintf() (always NUL-terminated), then conditionally
copied to p_buf with strncpy(). The p_buf destination is used as a
C string by all callers in target_core_configfs.c: strlen(buf) and
sprintf(page+len, "%s", buf) to build sysfs output.
NUL-padding is not required: callers in target_core_configfs.c
pre-zero p_buf with memset() or initializer before calling these
functions, and consume p_buf only as a NUL-terminated C string via
strlen() and "%s", never exposing trailing bytes.
No behavioral change: the source buf is always NUL-terminated and
shorter than VPD_TMP_BUF_SIZE, so strscpy() produces identical output.
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://patch.msgid.link/20260323171311.work.101-kees@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The target_core_file doesn't initialize the aio_cmd->iocb for the
ki_write_stream. When a write command fd_execute_rw_aio() is executed,
we may get a bogus ki_write_stream value, causing unintended write
failure status when checking iocb->ki_write_stream > max_write_streams
in the block device.
Let's just use kzalloc_flex when allocating the aio_cmd and let
ki_write_stream=0 to fix this issue.
Fixes: 732f25a2895a ("fs: add a write stream field to the kiocb")
Fixes: c27683da6406 ("block: expose write streams for block device nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/f1a2f81c62f043e31f80bb92d5f29893400c8ee2.1773450782.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
tcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESS
without draining any in-flight commands. The SCSI EH documentation
(scsi_eh.rst) requires that when a reset handler returns SUCCESS the driver
has made lower layers "forget about timed out scmds" and is ready for new
commands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug,
mpi3mr) enforces this by draining or completing outstanding commands before
returning SUCCESS.
Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flight
scsi_cmnd structures for recovery commands (e.g. TUR) while the target core
still has async completion work queued for the old se_cmd. The memset in
queuecommand zeroes se_lun and lun_ref_active, causing
transport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUN
reference prevents transport_clear_lun_ref() from completing, hanging
configfs LUN unlink forever in D-state:
INFO: task rm:264 blocked for more than 122 seconds.
rm D 0 264 258 0x00004000
Call Trace:
__schedule+0x3d0/0x8e0
schedule+0x36/0xf0
transport_clear_lun_ref+0x78/0x90 [target_core_mod]
core_tpg_remove_lun+0x28/0xb0 [target_core_mod]
target_fabric_port_unlink+0x50/0x60 [target_core_mod]
configfs_unlink+0x156/0x1f0 [configfs]
vfs_unlink+0x109/0x290
do_unlinkat+0x1d5/0x2d0
Fix this by making tcm_loop_target_reset() actually drain commands:
1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that
the target core knows about (those not yet CMD_T_COMPLETE).
2. Use blk_mq_tagset_busy_iter() to iterate all started requests and
flush_work() on each se_cmd — this drains any deferred completion work
for commands that already had CMD_T_COMPLETE set before the TMR (which
the TMR skips via __target_check_io_state()). This is the same pattern
used by mpi3mr, scsi_debug, and libsas to drain outstanding commands
during reset.
Fixes: e0eb5d38b732 ("scsi: target: tcm_loop: Use block cmd allocator for se_cmds")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Link: https://patch.msgid.link/27011aa34c8f6b1b94d2e3cf5655b6d037f53428.1773706803.git.josef@toxicpanda.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
sbc_execute_unmap() checks LBA + range does not exceed the device capacity,
but does not guard against LBA + range wrapping around on 64-bit overflow.
Add an overflow check matching the pattern already used for WRITE_SAME in
the same file.
Fixes: 86d7182985d2 ("target: Add sbc_execute_unmap() helper")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881593C61AD52C69FBDB0BDAF7CA@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There were two copy and paste type of errors where I swapped 'complete'
with 'submit' names. Use the correct variables and definitions.
This problem was found by Dmitry Bogdanov and this patch builds on top of
his patch to fix a second instance that was found.
Fixes: 06933066d88a ("scsi: target: Add support for completing commands from backend context")
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
[mnc: Fixed second instance]
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260307220630.131008-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
bdev_nonrot() is simply the negative return value of bdev_rot().
So replace all call sites of bdev_nonrot() with calls to bdev_rot()
and remove bdev_nonrot().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This allows userspace to request if we complete in the backend context
or the frontend driver. It works the same as submission where you can
write 0 to 2 to complete_type:
0 - Use the fabric driver's preference.
1 - Complete from the backend calling context if the fabric supports
it.
2 - Queue the completion to LIO's completion workqueue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260222232946.7637-4-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This has us use the driver's completion preference by default. There is
no behavior changes with this patch and we queue completion to LIO's
completion workqueue by default.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260222232946.7637-3-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
To complete a command several drivers just drop their reference and add
it to list to be processed by a driver specific thread. So there's no
need to go from backend context to the LIO thread then to the driver's
thread. When avoiding the LIO thread, IOPS can increase from 20-30% for
workloads like:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=8K \
--ioengine=libaio --iodepth=128 --numjobs=$jobs
where increasing jobs increases the performance improvement (this is
using NVMe drives with LIO's submit_type=1 to directly submit).
Add the infrastructure so drivers and userspace can control how to
complete a command like is done for the submission path. In this commit
there is no behavior change and we continue to defer to the LIO
workqueue thread. In the subsequent commits we will allow drivers to
report what they support and allow userspace to control the behavior.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260222232946.7637-2-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In flush_write_buffer, &p->frag_sem is acquired and then the loaded store
function is called, which, here, is target_core_item_dbroot_store(). This
function called filp_open(), following which these functions were called
(in reverse order), according to the call trace:
down_read
__configfs_open_file
do_dentry_open
vfs_open
do_open
path_openat
do_filp_open
file_open_name
filp_open
target_core_item_dbroot_store
flush_write_buffer
configfs_write_iter
target_core_item_dbroot_store() tries to validate the new file path by
trying to open the file path provided to it; however, in this case, the bug
report shows:
db_root: not a directory: /sys/kernel/config/target/dbroot
indicating that the same configfs file was tried to be opened, on which it
is currently working on. Thus, it is trying to acquire frag_sem semaphore
of the same file of which it already holds the semaphore obtained in
flush_write_buffer(), leading to acquiring the semaphore in a nested manner
and a possibility of recursive locking.
Fix this by modifying target_core_item_dbroot_store() to use kern_path()
instead of filp_open() to avoid opening the file using filesystem-specific
function __configfs_open_file(), and further modifying it to make this fix
compatible.
Reported-by: syzbot+f6e8174215573a84b797@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f6e8174215573a84b797
Tested-by: syzbot+f6e8174215573a84b797@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Prithvi Tambewagh <activprithvi@gmail.com>
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://patch.msgid.link/20260216062002.61937-1-activprithvi@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes.
The biggest core change is the massive code motion in the sd driver to
remove forward declarations and the most significant change is to
enumify the queuecommand return"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
scsi: csiostor: Fix dereference of null pointer rn
scsi: buslogic: Reduce stack usage
scsi: ufs: host: mediatek: Require CONFIG_PM
scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
scsi: mpi3mr: Make driver probing asynchronous
scsi: ufs: core: Flush exception handling work when RPM level is zero
scsi: efct: Use IRQF_ONESHOT and default primary handler
scsi: ufs: core: Use a host-wide tagset in SDB mode
scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: mpi3mr: Driver version update to 8.17.0.3.50
scsi: mpi3mr: Fixed the W=1 compilation warning
scsi: mpi3mr: Record and report controller firmware faults
scsi: mpi3mr: Update MPI Headers to revision 39
scsi: mpi3mr: Use negotiated link rate from DevicePage0
scsi: mpi3mr: Avoid redundant diag-fault resets
scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
scsi: mpi3mr: Add module parameter to control threaded IRQ polling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Support for batch request processing for ublk, improving the
efficiency of the kernel/ublk server communication. This can yield
nice 7-12% performance improvements
- Support for integrity data for ublk
- Various other ublk improvements and additions, including a ton of
selftests additions and updated
- Move the handling of blk-crypto software fallback from below the
block layer to above it. This reduces the complexity of dealing with
bio splitting
- Series fixing a number of potential deadlocks in blk-mq related to
the queue usage counter and writeback throttling and rq-qos debugfs
handling
- Add an async_depth queue attribute, to resolve a performance
regression that's been around for a qhilw related to the scheduler
depth handling
- Only use task_work for IOPOLL completions on NVMe, if it is necessary
to do so. An earlier fix for an issue resulted in all these
completions being punted to task_work, to guarantee that completions
were only run for a given io_uring ring when it was local to that
ring. With the new changes, we can detect if it's necessary to use
task_work or not, and avoid it if possible.
- rnbd fixes:
- Fix refcount underflow in device unmap path
- Handle PREFLUSH and NOUNMAP flags properly in protocol
- Fix server-side bi_size for special IOs
- Zero response buffer before use
- Fix trace format for flags
- Add .release to rnbd_dev_ktype
- MD pull requests via Yu Kuai
- Fix raid5_run() to return error when log_init() fails
- Fix IO hang with degraded array with llbitmap
- Fix percpu_ref not resurrected on suspend timeout in llbitmap
- Fix GPF in write_page caused by resize race
- Fix NULL pointer dereference in process_metadata_update
- Fix hang when stopping arrays with metadata through dm-raid
- Fix any_working flag handling in raid10_sync_request
- Refactor sync/recovery code path, improve error handling for
badblocks, and remove unused recovery_disabled field
- Consolidate mddev boolean fields into mddev_flags
- Use mempool to allocate stripe_request_ctx and make sure
max_sectors is not less than io_opt in raid5
- Fix return value of mddev_trylock
- Fix memory leak in raid1_run()
- Add Li Nan as mdraid reviewer
- Move phys_vec definitions to the kernel types, mostly in preparation
for some VFIO and RDMA changes
- Improve the speed for secure erase for some devices
- Various little rust updates
- Various other minor fixes, improvements, and cleanups
* tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
blk-mq: ABI/sysfs-block: fix docs build warnings
selftests: ublk: organize test directories by test ID
block: decouple secure erase size limit from discard size limit
block: remove redundant kill_bdev() call in set_blocksize()
blk-mq: add documentation for new queue attribute async_dpeth
block, bfq: convert to use request_queue->async_depth
mq-deadline: covert to use request_queue->async_depth
kyber: covert to use request_queue->async_depth
blk-mq: add a new queue sysfs attribute async_depth
blk-mq: factor out a helper blk_mq_limit_depth()
blk-mq-sched: unify elevators checking for async requests
block: convert nr_requests to unsigned int
block: don't use strcpy to copy blockdev name
blk-mq-debugfs: warn about possible deadlock
blk-mq-debugfs: add missing debugfs_mutex in blk_mq_debugfs_register_hctxs()
blk-mq-debugfs: remove blk_mq_debugfs_unregister_rqos()
blk-mq-debugfs: make blk_mq_debugfs_register_rqos() static
blk-rq-qos: fix possible debugfs_mutex deadlock
blk-mq-debugfs: factor out a helper to register debugfs for all rq_qos
blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter
...
|
|
The code in sbp_make_tpg() limits "tpgt" to UINT_MAX but the data type of
"tpg->tport_tpgt" is u16. This causes a type truncation issue.
When a user creates a TPG via configfs mkdir, for example:
mkdir /sys/kernel/config/target/sbp/<wwn>/tpgt_70000
The value 70000 passes the "tpgt > UINT_MAX" check since 70000 is far less
than 4294967295. However, when assigned to the u16 field tpg->tport_tpgt,
the value is silently truncated to 4464 (70000 & 0xFFFF). This causes the
value the user specified to differ from what is actually stored, leading to
confusion and potential unexpected behavior.
Fix this by changing the type of "tpgt" to u16 and using kstrtou16() which
will properly reject values outside the u16 range.
Fixes: a511ce339780 ("sbp-target: Initial merge of firewire/ieee-1394 target mode support")
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Link: https://patch.msgid.link/20260121114515.1829-2-qikeyu2017@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning
option has been introduced. This warning is enabled by default and can
be used to catch .queuecommand() implementations that return another
value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch
that changes the return type of the .queuecommand() implementations from
'int' into 'enum scsi_qc_status'. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a third parameter 'const struct io_comp_batch *' to the rq_end_io_fn
callback signature. This allows end_io handlers to access the completion
batch context when requests are completed via blk_mq_end_request_batch().
The io_comp_batch is passed from blk_mq_end_request_batch(), while NULL
is passed from __blk_mq_end_request() and blk_mq_put_rq_ref() which don't
have batch context.
This infrastructure change enables drivers to detect whether they're
being called from a batched completion path (like iopoll) and access
additional context stored in the io_comp_batch.
Update all rq_end_io_fn implementations:
- block/blk-mq.c: blk_end_sync_rq
- block/blk-flush.c: flush_end_io, mq_flush_data_end_io
- drivers/nvme/host/ioctl.c: nvme_uring_cmd_end_io
- drivers/nvme/host/core.c: nvme_keep_alive_end_io
- drivers/nvme/host/pci.c: abort_endio, nvme_del_queue_end, nvme_del_cq_end
- drivers/nvme/target/passthru.c: nvmet_passthru_req_done
- drivers/scsi/scsi_error.c: eh_lock_door_done
- drivers/scsi/sg.c: sg_rq_end_io
- drivers/scsi/st.c: st_scsi_execute_end
- drivers/target/target_core_pscsi.c: pscsi_req_done
- drivers/md/dm-rq.c: end_clone_request
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In iscsit_dec_session_usage_count(), the function calls complete() while
holding the sess->session_usage_lock. Similar to the connection usage count
logic, the waiter signaled by complete() (e.g., in the session release
path) may wake up and free the iscsit_session structure immediately.
This creates a race condition where the current thread may attempt to
execute spin_unlock_bh() on a session structure that has already been
deallocated, resulting in a KASAN slab-use-after-free.
To resolve this, release the session_usage_lock before calling complete()
to ensure all dereferences of the sess pointer are finished before the
waiter is allowed to proceed with deallocation.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260112165352.138606-3-mlombard@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In iscsit_dec_conn_usage_count(), the function calls complete() while
holding the conn->conn_usage_lock. As soon as complete() is invoked, the
waiter (such as iscsit_close_connection()) may wake up and proceed to free
the iscsit_conn structure.
If the waiter frees the memory before the current thread reaches
spin_unlock_bh(), it results in a KASAN slab-use-after-free as the function
attempts to release a lock within the already-freed connection structure.
Fix this by releasing the spinlock before calling complete().
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260112165352.138606-2-mlombard@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
configfs_group_operations
'struct configfs_item_operations' and 'configfs_group_operations' are
not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
151831 80058 4832 236721 39cb1 drivers/target/target_core_configfs.o
45200 16658 0 61858 f1a2 drivers/target/target_core_fabric_configfs.o
After:
=====
text data bss dec hex filename
152599 79290 4832 236721 39cb1 drivers/target/target_core_configfs.o
46352 15506 0 61858 f1a2 drivers/target/target_core_fabric_configfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/a0f25237ae86b8c4dd7a3876c4ed2dc3de200173.1767008082.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
