| Age | Commit message (Collapse) | Author |
|---|
|
A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its
data area. tipc_get_gap_ack_blks() only verifies that the record's len
field is self-consistent with its ugack_cnt/bgack_cnt counts
(sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check
that the record actually fits in the message data area, msg_data_sz().
The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen)
break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the
returned size, so tipc_link_advance_transmq() copies the record off the
receive skb with an attacker-controlled count:
this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt),
GFP_ATOMIC);
A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one
ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its
data area is short, carrying a Gap ACK record with len = 0x400,
bgack_cnt = 0xff and ugack_cnt = 0. len then equals
struct_size(p, gacks, 255), so the consistency check passes and ga is
non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out
of the much smaller skb:
BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60
Read of size 1024 at addr ffff0000c7030d38 by task poc864/69
Call trace:
kmemdup_noprof+0x48/0x60
tipc_link_advance_transmq+0x86c/0xb80
tipc_link_bc_ack_rcv+0x19c/0x1e0
tipc_bcast_sync_rcv+0x1c4/0x2c4
tipc_rcv+0x85c/0x1340
tipc_l2_rcv_msg+0xac/0x104
The buggy address belongs to the object at ffff0000c7030d00
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 56 bytes inside of
allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0)
The copied-out bytes are subsequently consumed as gap/ack values, but
the read is already out of bounds at the kmemdup() regardless of how
they are used.
The unicast STATE path drops such a message: "if (glen > dlen) break;"
skips the rest of STATE_MSG handling and the skb is freed. Make the
broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record
against msg_data_sz() and, when it does not fit, reports it back through
tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than
processed. ga is not cleared on this path: ga == NULL already means
"legacy peer without Selective ACK", a distinct legitimate state.
Fixes: d7626b5acff9 ("tipc: introduce Gap ACK blocks for broadcast link")
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Page <sam@bynar.io>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260625143815.1525412-1-sam@bynar.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Blamed commit introduced a busy-wait loop in tipc_exit_net()
to wait for pending UDP bearer cleanup works to complete:
while (atomic_read(&tn->wq_count))
cond_resched();
This loop can busy-wait for a long time if cond_resched() is a NOP. This
typically happens if the netns exit is executed by a high priority task,
or under kernels configured without preemption (CONFIG_PREEMPT_NONE). In
such cases, it wastes CPU cycles and can lead to soft lockups.
Fix this by replacing the busy loop with wait_var_event(), allowing the
thread to sleep properly until the work queue count reaches zero.
Accordingly, update cleanup_bearer() to use atomic_dec_and_test() and
wake_up_var() to wake up the waiter when the count drops to zero.
This uses the global wait queue hash table, avoiding the need to bloat
struct tipc_net with a wait_queue_head_t. The atomic_dec_and_test()
provides the necessary memory barrier to ensure the wakeup is not missed.
Fixes: 04c26faa51d1 ("tipc: wait and exit until all work queues are done")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: tipc-discussion@lists.sourceforge.net
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260623173030.2925059-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TIPC UDP media bearer teardown calls dst_cache_destroy() on its
replicast caches before calling synchronize_net() to wait for
concurrent RCU readers (transmitters) to finish:
static void cleanup_bearer(struct work_struct *work)
{
...
list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) {
dst_cache_destroy(&rcast->dst_cache);
list_del_rcu(&rcast->list);
kfree_rcu(rcast, rcu);
}
...
dst_cache_destroy(&ub->rcast.dst_cache);
udp_tunnel_sock_release(ub->sk);
synchronize_net();
...
}
This is highly buggy because dst_cache_destroy() immediately frees the
per-CPU cache memory (free_percpu()) and releases the cached dst
entries without any synchronization.
If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another
CPU under RCU protection, it can call dst_cache_get() concurrently,
leading to:
1. Use-After-Free on the per-CPU cache pointer itself (crash).
2. "rcuref - imbalanced put()" warning if it attempts to release a
dst that was concurrently released by dst_cache_destroy().
Furthermore, calling kfree(ub) immediately after synchronize_net() without
closing the socket first (or waiting after closing it) leaves a window
where a concurrent receiver (tipc_udp_recv()) could start after
synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs.
To fix this, we must defer dst_cache_destroy() and kfree(ub) until after
we have ensured that no more readers can see the bearer/socket and all
existing readers have finished:
1. Defer rcast entry destruction (both dst_cache_destroy() and kfree())
to an RCU callback using call_rcu_hurry().
Using call_rcu_hurry() ensures the dst entries are released quickly.
2. Release the bearer socket using udp_tunnel_sock_release() (stops
new receive readers).
3. Call synchronize_net() to wait for all outstanding RCU readers
(both transmit and receive) to finish.
4. Now that it is safe, call dst_cache_destroy() on the main bearer
cache, and free ub.
Note: 3) and 4) can be changed later in net-next to also use
call_rcu_hurry() and get rid of the synchronize_net() latency.
Fixes: e9c1a793210f ("tipc: add dst_cache support for udp media")
Reported-by: syzbot+e14bc5d4942756023b77@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a396a66.52ae72c2.136ac7.0003.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: tipc-discussion@lists.sourceforge.net
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260623173030.2925059-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bearer_disable() frees b->disc with tipc_disc_delete()'s plain kfree(),
but tipc_disc_rcv() still dereferences b->disc in RX softirq under
rcu_read_lock() (tipc_udp_recv -> tipc_rcv -> tipc_disc_rcv).
L2 bearers are safe thanks to the synchronize_net() in
tipc_disable_l2_media(), but the UDP bearer defers that call to the
cleanup_bearer() workqueue, so the discoverer is freed with no grace
period:
BUG: KASAN: slab-use-after-free in tipc_disc_rcv (net/tipc/discover.c:149)
Read of size 8 at addr ffff88802348b728 by task poc_tipc/184
<IRQ>
tipc_disc_rcv (net/tipc/discover.c:149)
tipc_rcv (net/tipc/node.c:2126)
tipc_udp_recv (net/tipc/udp_media.c:391)
udp_rcv (net/ipv4/udp.c:2643)
ip_local_deliver_finish (net/ipv4/ip_input.c:241)
</IRQ>
Freed by task 181:
kfree (mm/slub.c:6565)
bearer_disable (net/tipc/bearer.c:418)
tipc_nl_bearer_disable (net/tipc/bearer.c:1001)
The bearer is freed with kfree_rcu(); free the discoverer the same way.
Add an rcu_head to struct tipc_discoverer and free it and its skb from an
RCU callback.
Because the RCU callback (tipc_disc_free_rcu) lives in module text, a
call_rcu() that is still pending when the tipc module is unloaded would
invoke a freed function. Add an rcu_barrier() to tipc_exit() after the
bearer subsystem has been torn down, so all pending discoverer callbacks
have run before the module text goes away.
Reachable from an unprivileged user namespace: the TIPCv2 genl family is
netnsok and its bearer commands have no GENL_ADMIN_PERM. Needs CONFIG_TIPC
and CONFIG_TIPC_MEDIA_UDP.
Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260617135744.3383175-3-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to
crypto_aead_decrypt(req) without taking a reference on the netns, unlike
the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously
(e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs
tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the
meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the
per-netns tipc_crypto, and the completion then reads it:
tipc_aead_decrypt_done() dereferences aead->crypto->stats and
aead->crypto->net, and tipc_crypto_rcv_complete() dereferences
aead->crypto->aead[] and the node table -- reading freed memory.
Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO):
BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999)
Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51
Workqueue: events_unbound
Call Trace:
tipc_aead_decrypt_done (net/tipc/crypto.c:999)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Allocated by task 169:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
tipc_crypto_start (net/tipc/crypto.c:1502)
tipc_init_net (net/tipc/core.c:72)
ops_init (net/core/net_namespace.c:137)
setup_net (net/core/net_namespace.c:446)
copy_net_ns (net/core/net_namespace.c:579)
create_new_namespaces (kernel/nsproxy.c:132)
__x64_sys_unshare (kernel/fork.c:3316)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Freed by task 8:
kfree (mm/slub.c:6566)
tipc_exit_net (net/tipc/core.c:119)
cleanup_net (net/core/net_namespace.c:704)
process_one_work (kernel/workqueue.c:3314)
kthread (kernel/kthread.c:436)
This is the same class of bug that commit e279024617134 ("net/tipc: fix
slab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encrypt
side. The encrypt path takes maybe_get_net(aead->crypto->net) before
crypto_aead_encrypt() and drops it with put_net() on the synchronous
return paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSY
return keeps the reference for the async callback to release. The decrypt
path was left without the equivalent guard.
Mirror the encrypt-side fix on the decrypt path: take a net reference
before crypto_aead_decrypt() (failing with -ENODEV and the matching
bearer put if it cannot be acquired), keep it across the
-EINPROGRESS/-EBUSY async return, and drop it with put_net() on the
synchronous success/error return and at the end of
tipc_aead_decrypt_done().
Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key is
flooded with crafted encrypted frames from an unknown peer (driving the
cluster-key decrypt path) while the bearer's netns is repeatedly torn
down. The completion must run asynchronously to outlive
tipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decrypts
synchronously, so the async path was exercised via cryptd offload. The
unguarded aead->crypto dereference in tipc_aead_decrypt_done() is the
unpatched upstream path; tipc_aead_decrypt() still lacks
maybe_get_net(aead->crypto->net), so the completion can outlive the free
on any config where crypto_aead_decrypt() goes async.
Found by 0sec automated security-research tooling (https://0sec.ai).
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260617075818.37431-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge in late fixes in preparation for the net-next PR.
Conflicts:
net/tls/tls_sw.c
406e8a651a7b ("net: skmsg: preserve sg.copy across SG transforms")
79511603a65b ("tls: remove dead sockmap (psock) handling from the SW path")
drivers/net/ethernet/microsoft/mana/mana_en.c
f8fd56977eeea ("net: mana: guard TX wq object destroy with INVALID_MANA_HANDLE check")
d07efe5a6e641 ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
https://lore.kernel.org/ajAPXu-C_PuTgV-a@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot reported a slab-use-after-free in ipvlan_hard_header() when
called from tipc_l2_send_msg().
The root cause is that tipc_disable_l2_media() calls synchronize_net()
while b->media_ptr is still valid. This allows concurrent RCU readers
to obtain the device pointer after synchronize_net() has finished.
The pointer is cleared later in bearer_disable(), but without any
subsequent synchronization, allowing the device to be freed while
still in use by readers.
Fix this by clearing b->media_ptr in tipc_disable_l2_media() before
calling synchronize_net().
This is safe to do now because the call order in bearer_disable()
was reversed in 0d051bf93c06 ("tipc: make bearer packet filtering generic")
to call tipc_node_delete_links() (which needs the pointer) before
disable_media().
Fixes: 282b3a056225 ("tipc: send out RESET immediately when link goes down")
https: //lore.kernel.org/netdev/6a2c1007.428ffe26.258b27.015d.GAE@google.com/T/#u
Reported-by: syzbot+64ec81389cbad56a8c35@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260612135949.4010482-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tipc_sk_enqueue() runs with sk->sk_lock.slock held while the socket is
owned by user context. The spinlock protects the backlog queue in this
path, but it does not serialize against the socket owner consuming or
purging sk_receive_queue.
KASAN reported:
CPU: 14 UID: 0 PID: 1050 Comm: tipc3 Not tainted 7.1.0-rc6+ #126 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0 lib/dump_stack.c:123
print_report+0xce/0x5b0 mm/kasan/report.c:482
kasan_report+0xc6/0x100 mm/kasan/report.c:597
__asan_report_load4_noabort+0x14/0x30 mm/kasan/report_generic.c:380
tipc_skb_dump+0x1327/0x16f0 net/tipc/trace.c:73
tipc_list_dump+0x208/0x2e0 net/tipc/trace.c:187
tipc_sk_dump+0xaf6/0xd60 net/tipc/socket.c:3996
trace_event_raw_event_tipc_sk_class+0x312/0x5a0 net/tipc/trace.h:188
tipc_sk_rcv+0xb1d/0x1d50 net/tipc/socket.c:2497
tipc_node_xmit+0x1c3/0x1440 net/tipc/node.c:1689
__tipc_sendmsg+0x97a/0x1440 net/tipc/socket.c:1512
tipc_sendmsg+0x52/0x80 net/tipc/socket.c:1400
sock_sendmsg+0x2f6/0x3e0 net/socket.c:825
splice_to_socket+0x7f9/0x1010 fs/splice.c:884
do_splice+0xe21/0x2330 fs/splice.c:936
__do_splice+0x153/0x260 fs/splice.c:1431
__x64_sys_splice+0x150/0x230 fs/splice.c:1616
x64_sys_call+0xeb5/0x2790 arch/x86/entry/syscall_64.c:41
do_syscall_64+0xf3/0x620 arch/x86/entry/syscall_64.c:63
entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:130
RIP: 0033:0x71624e8aafe2
Code: 08 0f 85 71 3a ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66
RSP: 002b:0000716157ffed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000113
RAX: ffffffffffffffda RBX: 0000716157fff6c0 RCX: 000071624e8aafe2
RDX: 000000000000005f RSI: 0000000000000000 RDI: 0000000000000066
RBP: 0000716157ffed90 R08: 0000000000008000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffff00
R13: 0000000000000021 R14: 0000000000000000 R15: 00007fff89799c40
</TASK>
The TIPC_DUMP_ALL tracepoints in tipc_sk_enqueue() also dump
sk_receive_queue and can therefore dereference skbs that the socket
owner has already dequeued or freed. Restrict these dumps to
TIPC_DUMP_SK_BKLGQ, which matches the queue protected by the held
spinlock.
Keep the change limited to the enqueue path, where the unsafe queue dump
is reachable while the socket is owned by user context.
Fixes: 01e661ebfbad ("tipc: add trace_events for tipc socket")
Cc: stable@vger.kernel.org
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260611135647.3666727-1-lixiasong1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tipc_update_nametbl() inserts a binding advertised by a peer node using
the lower and upper service-range bounds taken directly from the wire,
without checking that lower <= upper. The local bind path validates the
ordering (tipc_uaddr_valid()), but the name-distribution path does not.
A binding with lower > upper is inserted at the far end of the
service-range rbtree (keyed on lower) where no lookup or withdrawal can
ever match it (service_range_foreach_match() requires sr->lower <= end).
The publication, its service_range node and the augmented rbtree entry
are then leaked for the lifetime of the namespace, and there is no
per-peer cap equivalent to TIPC_MAX_PUBL on locally created bindings.
Reject inverted ranges in the network path as well. A peer node can
otherwise leak unbounded binding-table memory by sending PUBLICATION
items with lower > upper.
Fixes: 37922ea4a310 ("tipc: permit overlapping service ranges in name table")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260610124003.3831170-4-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count
from the unsigned 16-bit send counter snt_unacked without checking that it
does not exceed the number of messages actually outstanding:
tsk->snt_unacked -= msg_conn_ack(hdr);
msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK
message. If the ack count is larger than snt_unacked, the subtraction
wraps to a near-maximum value, leaving tsk_conn_cong() permanently true
and starving the connection of further transmits.
Validate the ACK count at the start of the CONN_ACK block and drop the
message if it acknowledges more messages than are outstanding. A peer (or,
for a local connection, the connected peer socket) can otherwise wedge a
TIPC connection's send side by sending an oversized connection ack.
Fixes: 10724cc7bb78 ("tipc: redesign connection-level flow control")
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260610124003.3831170-3-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TIPCv2 registers mutating generic-netlink operations without admin
permission flags. Generic netlink only checks CAP_NET_ADMIN when an
operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local
unprivileged process can currently change TIPC state through commands
such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and
bearer enable/disable.
The legacy TIPC netlink API already checks netlink_net_capable(...,
CAP_NET_ADMIN) for administrative commands. Give the TIPCv2 mutators
the equivalent generic-netlink gate. Use GENL_UNS_ADMIN_PERM, which
maps to the same namespace-aware CAP_NET_ADMIN check that
netlink_net_capable() performs, so the behaviour matches the legacy
path and keeps working for CAP_NET_ADMIN holders in a non-initial user
namespace (containers).
A QEMU/KASAN repro run as uid/gid 65534 with zero effective
capabilities previously succeeded in changing the network id and node
identity, setting and flushing key material, and enabling/disabling a
UDP bearer. With this patch applied the same operations fail with
-EPERM.
Fixes: 0655f6a8635b ("tipc: add bearer disable/enable to new netlink api")
Link: https://lore.kernel.org/all/20260604163102.2658553-1-dominik.czarnota@trailofbits.com/
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260610124003.3831170-2-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert TIPC sockets (msg, packet, stream proto_ops) to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *sopt
- Use sopt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
The sockopt_t parameter is named sopt to avoid collision with the
existing optname parameter named opt.
Note: Dropped the unnecessary parentheses to make checkpatch happier.
Also dropped two now-stale comments that referred to the old "res"
variable handling.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-6-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tipc udp_bearer does not need to access struct socket itself in
the fast path; it only reads struct sock, and struct socket is
only used for tunnel setup and teardown.
Let's store struct sock directly in struct udp_bearer.
Note that cleanup_bearer() calls synchronize_net() after
udp_tunnel_sock_release(), so udp_bearer is not freed until
inflight fast paths finish.
Note also that synchronize_rcu() is added in the error path
of tipc_udp_enable() since udp_bearer will be kfree()d
immediately once we remove synchronize_rcu() in
udp_tunnel_sock_release().
This can be later converted to kfree_rcu().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-15-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even setup_udp_tunnel_sock() does not need struct socket.
Let's change setup_udp_tunnel_sock() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
While the UDP tunnel interface accepts struct socket, this
encourages users to store the pointer unnecessarily. This
leads to extra dereferences when accessing struct sock fields
(e.g., sk->sk_user_data instead of sock->sk->sk_user_data).
Furthermore, these dereferences necessitate synchronize_rcu()
in udp_tunnel_sock_release() to protect the fast paths from
sock_orphan() setting sk->sk_socket to NULL.
This overhead can be avoided if users store the struct sock
pointer directly in their private structures.
As a prep, let's change udp_tunnel_sock_release() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Steady stream of fixes. Last two weeks feel comparable to the two
weeks before the merge window. Lots of AI-aided bug discovery. A newer
big source is Sashiko/Gemini (Roman Gushchin's system), which points
out issues in existing code during patch review (maybe 25% of fixes
here likely originating from Sashiko). Nice thing is these are often
fixed by the respective maintainers, not drive-bys.
Current release - new code bugs:
- kconfig: MDIO_PIC64HPSC should depend on ARCH_MICROCHIP
Previous releases - regressions:
- add async ndo_set_rx_mode and switch drivers which we promised to
be called under the per-netdev mutex to it
- dsa: remove duplicate netdev_lock_ops() for conduit ethtool ops
- hv_sock: report EOF instead of -EIO for FIN
- vsock/virtio: fix MSG_PEEK calculation on bytes to copy
Previous releases - always broken:
- ipv6: fix possible UAF in icmpv6_rcv()
- icmp: validate reply type before using icmp_pointers
- af_unix: drop all SCM attributes for SOCKMAP
- netfilter: fix a number of bugs in the osf (OS fingerprinting)
- eth: intel: fix timestamp interrupt configuration for E825C
Misc:
- bunch of data-race annotations"
* tag 'net-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (148 commits)
rxrpc: Fix error handling in rxgk_extract_token()
rxrpc: Fix re-decryption of RESPONSE packets
rxrpc: Fix rxrpc_input_call_event() to only unshare DATA packets
rxrpc: Fix missing validation of ticket length in non-XDR key preparsing
rxgk: Fix potential integer overflow in length check
rxrpc: Fix conn-level packet handling to unshare RESPONSE packets
rxrpc: Fix potential UAF after skb_unshare() failure
rxrpc: Fix rxkad crypto unalignment handling
rxrpc: Fix memory leaks in rxkad_verify_response()
net: rds: fix MR cleanup on copy error
m68k: mvme147: Make me the maintainer
net: txgbe: fix firmware version check
selftests/bpf: check epoll readiness during reuseport migration
tcp: call sk_data_ready() after listener migration
vhost_net: fix sleeping with preempt-disabled in vhost_net_busy_poll()
ipv6: Cap TLV scan in ip6_tnl_parse_tlv_enc_lim
tipc: fix double-free in tipc_buf_append()
llc: Return -EINPROGRESS from llc_ui_connect()
ipv4: icmp: validate reply type before using icmp_pointers
selftests/net: packetdrill: cover RFC 5961 5.2 challenge ACK on both edges
...
|
|
tipc_msg_validate() can potentially reallocate the skb it is validating,
freeing the old one. In tipc_buf_append(), it was being called with a
pointer to a local variable which was a copy of the caller's skb
pointer.
If the skb was reallocated and validation subsequently failed, the error
handling path would free the original skb pointer, which had already
been freed, leading to double-free.
Fix this by checking if head now points to a newly allocated reassembled
skb. If it does, reassign *headbuf for later freeing operations.
Fixes: d618d09a68e4 ("tipc: enforce valid ratio between skb truesize and contents")
Suggested-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes
- Remove simd skcipher support
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off
Algorithms:
- Remove CPU-based des/3des acceleration
- Add test vectors for authenc(hmac(md5),cbc({aes,des})) and
authenc(hmac({md5,sha1,sha224,sha256,sha384,sha512}),rfc3686(ctr(aes)))
- Replace spin lock with mutex in jitterentropy
Drivers:
- Add authenc algorithms to safexcel
- Add support for zstd in qat
- Add wireless mode support for QAT GEN6
- Add anti-rollback support for QAT GEN6
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2"
* tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (129 commits)
crypto: af_alg - use sock_kmemdup in alg_setkey_by_key_serial
crypto: vmx - remove CRYPTO_DEV_VMX from Kconfig
crypto: omap - convert reqctx buffer to fixed-size array
crypto: atmel-sha204a - add Thorsten Blum as maintainer
crypto: atmel-ecc - add Thorsten Blum as maintainer
crypto: qat - fix IRQ cleanup on 6xxx probe failure
crypto: geniv - Remove unused spinlock from struct aead_geniv_ctx
crypto: qce - simplify qce_xts_swapiv()
crypto: hisilicon - Fix dma_unmap_single() direction
crypto: talitos - rename first/last to first_desc/last_desc
crypto: talitos - fix SEC1 32k ahash request limitation
crypto: jitterentropy - replace long-held spinlock with mutex
crypto: hisilicon - remove unused and non-public APIs for qm and sec
crypto: hisilicon/qm - drop redundant variable initialization
crypto: hisilicon/qm - remove else after return
crypto: hisilicon/qm - add const qualifier to info_name in struct qm_cmd_dump_item
crypto: hisilicon - fix the format string type error
crypto: ccree - fix a memory leak in cc_mac_digest()
crypto: qat - add support for zstd
crypto: qat - use swab32 macro
...
|
|
Use the typed random integer helpers instead of
get_random_bytes() when filling a single integer variable.
The helpers return the value directly, require no pointer
or size argument, and better express intent.
Skipped sites writing into __be16 (netdevsim) and __le64
(ceph) fields where a direct assignment would trigger
sparse endianness warnings.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260407150758.5889-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc8).
Conflicts:
net/ipv6/seg6_iptunnel.c
c3812651b522f ("seg6: separate dst_cache for input and output paths in seg6 lwtunnel")
78723a62b969a ("seg6: add per-route tunnel source address")
https://lore.kernel.org/adZhwtOYfo-0ImSa@sirena.org.uk
net/ipv4/icmp.c
fde29fd934932 ("ipv4: icmp: fix null-ptr-deref in icmp_build_probe()")
d98adfbdd5c01 ("ipv4: drop ipv6_stub usage and use direct function calls")
https://lore.kernel.org/adO3dccqnr6j-BL9@sirena.org.uk
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/chain_mode.c
51f4e090b9f8 ("net: stmmac: fix integer underflow in chain mode")
6b4286e05508 ("net: stmmac: rename STMMAC_GET_ENTRY() -> STMMAC_NEXT_ENTRY()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements
bc_ackers on every inbound group ACK, even when the same member has
already acknowledged the current broadcast round.
Because bc_ackers is a u16, a duplicate ACK received after the last
legitimate ACK wraps the counter to 65535. Once wrapped,
tipc_group_bc_cong() keeps reporting congestion and later group
broadcasts on the affected socket stay blocked until the group is
recreated.
Fix this by ignoring duplicate or stale ACKs before touching bc_acked or
bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and
prevents the underflow path.
Fixes: 2f487712b893 ("tipc: guarantee that group broadcast doesn't bypass group unicast")
Cc: stable@vger.kernel.org
Signed-off-by: Oleh Konko <security@1seal.org>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/41a4833f368641218e444fdcff822039.security@1seal.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the sequence of crypto_get_default_rng(),
crypto_rng_get_bytes(), and crypto_put_default_rng() with the equivalent
helper function crypto_stdrng_get_bytes().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As IPv6 is built-in only, the ipv6_stub infrastructure is no longer
necessary.
Convert remaining ipv6_stub users to make direct function calls. The
fallback functions introduced previously will prevent linkage errors
when CONFIG_IPV6 is disabled.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-9-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Maintaining a modular IPv6 stack offers image size savings for specific
setups, this benefit is outweighed by the architectural burden it
imposes on the subsystems on implementation and maintenance. Therefore,
drop it.
Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig
dependencies across the tree that explicitly checked for IPV6=m. In
addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR()
and MODULE_LICENSE().
This is also replacing module_init() by device_initcall(). It is not
possible to use fs_initcall() as IPv4 does because that creates a race
condition on IPv6 addrconf.
Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y
except for m68k as according to the bloat-o-meter the image is
increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on
this architecture by default. This is aligned with m68k RAM requirements
and recommendations [1].
[1] http://www.linux-m68k.org/faq/ram.html
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # arm64
Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A user can set conn_timeout to any value via
setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a
SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in
tipc_sk_filter_connect() executes:
delay %= (tsk->conn_timeout / 4);
If conn_timeout is in the range [0, 3], the integer division yields 0,
and the modulo operation triggers a divide-by-zero exception, causing a
kernel oops/panic.
Fix this by clamping conn_timeout to a minimum of 4 at the point of use
in tipc_sk_filter_connect().
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+
RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362)
Call Trace:
tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406)
__release_sock (include/net/sock.h:1185 net/core/sock.c:3213)
release_sock (net/core/sock.c:3797)
tipc_connect (net/tipc/socket.c:2570)
__sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098)
Fixes: 6787927475e5 ("tipc: buffer overflow handling in listener socket")
Cc: stable@vger.kernel.org
Signed-off-by: Mehul Rao <mehulrao@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260310170730.28841-1-mehulrao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
|
|
TIPC uses named table to store TIPC services represented by type and
instance. Each time an application calls TIPC API bind() to bind a
type/instance to a socket, an entry is created and inserted into the
named table. It looks like this:
named table:
key1, entry1 (type, instance ...)
key2, entry2 (type, instance ...)
In the above table, each entry represents a route for sending data
from one socket to the other. For all publications originated from
the same node, the key is UNIQUE to identify each entry.
It is calculated by this formula:
key = socket portid + number of bindings + 1 (1)
where:
- socket portid: unique and calculated by using linux kernel function
get_random_u32_below(). So, the value is randomized.
- number of bindings: the number of times a type/instance pair is bound
to a socket. This number is linearly increased,
starting from 0.
While the socket portid is unique and randomized by linux kernel, the
linear increment of "number of bindings" in formula (1) makes "key" not
unique anymore. For example:
- Socket 1 is created with its associated port number 20062001. Type 1000,
instance 1 is bound to socket 1:
key1: 20062001 + 0 + 1 = 20062002
Then, bind() is called a second time on Socket 1 to by the same type 1000,
instance 1:
key2: 20062001 + 1 + 1 = 20062003
Named table:
key1 (20062002), entry1 (1000, 1 ...)
key2 (20062003), entry2 (1000, 1 ...)
- Socket 2 is created with its associated port number 20062002. Type 1000,
instance 1 is bound to socket 2:
key3: 20062002 + 0 + 1 = 20062003
TIPC looks up the named table and finds out that key2 with the same value
already exists and rejects the insertion into the named table.
This leads to failure of bind() call from application on Socket 2 with error
message EINVAL "Invalid argument".
This commit fixes this issue by adding more port id checking to make sure
that the key is unique to publications originated from the same port id
and node.
Fixes: 218527fe27ad ("tipc: replace name table service range array with rb tree")
Signed-off-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260220050541.237962-1-tung.quang.nguyen@est.tech
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
tipc_aead_users_dec() calls rcu_dereference(aead) twice: once to store
in 'tmp' for the NULL check, and again inside the atomic_add_unless()
call.
Use the already-dereferenced 'tmp' pointer consistently, matching the
correct pattern used in tipc_aead_users_inc() and tipc_aead_users_set().
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Link: https://patch.msgid.link/20260203145621.17399-1-git@danielhodges.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rx->skey field contains a struct tipc_aead_key with GCM-AES
encryption keys used for TIPC cluster communication. Using plain
kfree() leaves this sensitive key material in freed memory pages
where it could potentially be recovered.
Switch to kfree_sensitive() to ensure the key material is zeroed
before the memory is freed.
Fixes: 1ef6f7c9390f ("tipc: add automatic session key exchange")
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Link: https://patch.msgid.link/20260131180114.2121438-1-hodgesd@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc6).
No conflicts, adjacent changes in:
drivers/net/phy/micrel.c
96a9178a29a6 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
61b7ade9ba8c ("net: phy: micrel: Add support for non PTP SKUs for lan8814")
and a trivial one in tools/testing/selftests/drivers/net/Makefile.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported use-after-free of tipc_net(net)->monitors[]
in tipc_mon_reinit_self(). [0]
The array is protected by RTNL, but tipc_mon_reinit_self()
iterates over it without RTNL.
tipc_mon_reinit_self() is called from tipc_net_finalize(),
which is always under RTNL except for tipc_net_finalize_work().
Let's hold RTNL in tipc_net_finalize_work().
[0]:
BUG: KASAN: slab-use-after-free in __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162
Read of size 1 at addr ffff88805eae1030 by task kworker/0:7/5989
CPU: 0 UID: 0 PID: 5989 Comm: kworker/0:7 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025
Workqueue: events tipc_net_finalize_work
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
__kasan_check_byte+0x2a/0x40 mm/kasan/common.c:568
kasan_check_byte include/linux/kasan.h:399 [inline]
lock_acquire+0x8d/0x360 kernel/locking/lockdep.c:5842
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162
rtlock_slowlock kernel/locking/rtmutex.c:1894 [inline]
rwbase_rtmutex_lock_state kernel/locking/spinlock_rt.c:160 [inline]
rwbase_write_lock+0xd3/0x7e0 kernel/locking/rwbase_rt.c:244
rt_write_lock+0x76/0x110 kernel/locking/spinlock_rt.c:243
write_lock_bh include/linux/rwlock_rt.h:99 [inline]
tipc_mon_reinit_self+0x79/0x430 net/tipc/monitor.c:718
tipc_net_finalize+0x115/0x190 net/tipc/net.c:140
process_one_work kernel/workqueue.c:3236 [inline]
process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3319
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3400
kthread+0x70e/0x8a0 kernel/kthread.c:463
ret_from_fork+0x439/0x7d0 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 6089:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:388 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:405
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x1a8/0x320 mm/slub.c:4407
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
tipc_mon_create+0xc3/0x4d0 net/tipc/monitor.c:657
tipc_enable_bearer net/tipc/bearer.c:357 [inline]
__tipc_nl_bearer_enable+0xe16/0x13f0 net/tipc/bearer.c:1047
__tipc_nl_compat_doit net/tipc/netlink_compat.c:371 [inline]
tipc_nl_compat_doit+0x3bc/0x5f0 net/tipc/netlink_compat.c:393
tipc_nl_compat_handle net/tipc/netlink_compat.c:-1 [inline]
tipc_nl_compat_recv+0x83c/0xbe0 net/tipc/netlink_compat.c:1321
genl_family_rcv_msg_doit+0x215/0x300 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x60e/0x790 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2552
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x846/0xa10 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x21c/0x270 net/socket.c:729
____sys_sendmsg+0x508/0x820 net/socket.c:2614
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668
__sys_sendmsg net/socket.c:2700 [inline]
__do_sys_sendmsg net/socket.c:2705 [inline]
__se_sys_sendmsg net/socket.c:2703 [inline]
__x64_sys_sendmsg+0x1a1/0x260 net/socket.c:2703
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6088:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:243 [inline]
__kasan_slab_free+0x5b/0x80 mm/kasan/common.c:275
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2422 [inline]
slab_free mm/slub.c:4695 [inline]
kfree+0x195/0x550 mm/slub.c:4894
tipc_l2_device_event+0x380/0x650 net/tipc/bearer.c:-1
notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2267 [inline]
call_netdevice_notifiers net/core/dev.c:2281 [inline]
unregister_netdevice_many_notify+0x14d7/0x1fe0 net/core/dev.c:12166
unregister_netdevice_many net/core/dev.c:12229 [inline]
unregister_netdevice_queue+0x33c/0x380 net/core/dev.c:12073
unregister_netdevice include/linux/netdevice.h:3385 [inline]
__tun_detach+0xe4d/0x1620 drivers/net/tun.c:621
tun_detach drivers/net/tun.c:637 [inline]
tun_chr_close+0x10d/0x1c0 drivers/net/tun.c:3433
__fput+0x458/0xa80 fs/file_table.c:468
task_work_run+0x1d4/0x260 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 46cb01eeeb86 ("tipc: update mon's self addr when node addr generated")
Reported-by: syzbot+d7dad7fd4b3921104957@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/690c323a.050a0220.baf87.007f.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107064038.2361188-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update all struct proto_ops connect() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_refcnt has been converted to refcount_t in 2017.
__sock_put(sk) being refcount_dec(&sk->sk_refcnt), it will complain
loudly if the current refcnt is 1 (or less) in a non racy way.
We can remove four WARN_ON() in favor of the generic refcount_dec()
check.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Xuanqiang Luo<luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20251014140605.2982703-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix typos in doc comments.
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
Link: https://patch.msgid.link/20251001105715.50462-1-bhanuseshukumar@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since the value returned by 'tipc_nodeid2string()' is not used, the
function may be adjusted to return the length of the result, which
is helpful to drop a few calls to 'strlen()' in 'tipc_link_create()'
and 'tipc_link_bc_create()'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250926074113.914399-1-dmantipov@yandex.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We want to split sk->sk_drops in the future to reduce
potential contention on this field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc6).
No conflicts.
Adjacent changes:
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
0a12c435a1d6 ("dt-bindings: net: sun8i-emac: Add A100 EMAC compatible")
b3603c0466a8 ("dt-bindings: net: sun8i-emac: Rename A523 EMAC0 to GMAC0")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported a null-ptr-deref in tipc_conn_close() during netns
dismantle. [0]
tipc_topsrv_stop() iterates tipc_net(net)->topsrv->conn_idr and calls
tipc_conn_close() for each tipc_conn.
The problem is that tipc_conn_close() is called after releasing the
IDR lock.
At the same time, there might be tipc_conn_recv_work() running and it
could call tipc_conn_close() for the same tipc_conn and release its
last ->kref.
Once we release the IDR lock in tipc_topsrv_stop(), there is no
guarantee that the tipc_conn is alive.
Let's hold the ref before releasing the lock and put the ref after
tipc_conn_close() in tipc_topsrv_stop().
[0]:
BUG: KASAN: use-after-free in tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165
Read of size 8 at addr ffff888099305a08 by task kworker/u4:3/435
CPU: 0 PID: 435 Comm: kworker/u4:3 Not tainted 4.19.204-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1fc/0x2ef lib/dump_stack.c:118
print_address_description.cold+0x54/0x219 mm/kasan/report.c:256
kasan_report_error.cold+0x8a/0x1b9 mm/kasan/report.c:354
kasan_report mm/kasan/report.c:412 [inline]
__asan_report_load8_noabort+0x88/0x90 mm/kasan/report.c:433
tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165
tipc_topsrv_stop net/tipc/topsrv.c:701 [inline]
tipc_topsrv_exit_net+0x27b/0x5c0 net/tipc/topsrv.c:722
ops_exit_list+0xa5/0x150 net/core/net_namespace.c:153
cleanup_net+0x3b4/0x8b0 net/core/net_namespace.c:553
process_one_work+0x864/0x1570 kernel/workqueue.c:2153
worker_thread+0x64c/0x1130 kernel/workqueue.c:2296
kthread+0x33f/0x460 kernel/kthread.c:259
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
Allocated by task 23:
kmem_cache_alloc_trace+0x12f/0x380 mm/slab.c:3625
kmalloc include/linux/slab.h:515 [inline]
kzalloc include/linux/slab.h:709 [inline]
tipc_conn_alloc+0x43/0x4f0 net/tipc/topsrv.c:192
tipc_topsrv_accept+0x1b5/0x280 net/tipc/topsrv.c:470
process_one_work+0x864/0x1570 kernel/workqueue.c:2153
worker_thread+0x64c/0x1130 kernel/workqueue.c:2296
kthread+0x33f/0x460 kernel/kthread.c:259
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
Freed by task 23:
__cache_free mm/slab.c:3503 [inline]
kfree+0xcc/0x210 mm/slab.c:3822
tipc_conn_kref_release net/tipc/topsrv.c:150 [inline]
kref_put include/linux/kref.h:70 [inline]
conn_put+0x2cd/0x3a0 net/tipc/topsrv.c:155
process_one_work+0x864/0x1570 kernel/workqueue.c:2153
worker_thread+0x64c/0x1130 kernel/workqueue.c:2296
kthread+0x33f/0x460 kernel/kthread.c:259
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
The buggy address belongs to the object at ffff888099305a00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 8 bytes inside of
512-byte region [ffff888099305a00, ffff888099305c00)
The buggy address belongs to the page:
page:ffffea000264c140 count:1 mapcount:0 mapping:ffff88813bff0940 index:0x0
flags: 0xfff00000000100(slab)
raw: 00fff00000000100 ffffea00028b6b88 ffffea0002cd2b08 ffff88813bff0940
raw: 0000000000000000 ffff888099305000 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888099305900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888099305980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888099305a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888099305a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888099305b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: c5fa7b3cf3cb ("tipc: introduce new TIPC server infrastructure")
Reported-by: syzbot+d333febcf8f4bc5f6110@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=27169a847a70550d17be
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250702014350.692213-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Difference between sock_i_uid() and sk_uid() is that
after sock_orphan(), sock_i_uid() returns GLOBAL_ROOT_UID
while sk_uid() returns the last cached sk->sk_uid value.
None of sock_i_uid() callers care about this.
Use sk_uid() which is much faster and inlined.
Note that diag/dump users are calling sock_i_ino() and
can not see the full benefit yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20250620133001.4090592-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The reproduction steps:
1. create a tun interface
2. enable l2 bearer
3. TIPC_NL_UDP_GET_REMOTEIP with media name set to tun
tipc: Started in network mode
tipc: Node identity 8af312d38a21, cluster identity 4711
tipc: Enabled bearer <eth:syz_tun>, priority 1
Oops: general protection fault
KASAN: null-ptr-deref in range
CPU: 1 UID: 1000 PID: 559 Comm: poc Not tainted 6.16.0-rc1+ #117 PREEMPT
Hardware name: QEMU Ubuntu 24.04 PC
RIP: 0010:tipc_udp_nl_dump_remoteip+0x4a4/0x8f0
the ub was in fact a struct dev.
when bid != 0 && skip_cnt != 0, bearer_list[bid] may be NULL or
other media when other thread changes it.
fix this by checking media_id.
Fixes: 832629ca5c313 ("tipc: add UDP remoteip dump to netlink API")
Signed-off-by: Haixia Qu <hxqu@hillstonenet.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250617055624.2680-1-hxqu@hillstonenet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip6tunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IP6CB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel6_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IPv6 multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/acb4f9f3e40c3a931236c3af08a720b017fbfbfb.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function always returns zero, thus the return value does not carry any
signal. Just make it void.
Most callers already ignore the return value. However:
- Refold arguments of the call from sctp_v6_xmit() so that they fit into
the 80-column limit.
- tipc_udp_xmit() initializes err from the return value, but that should
already be always zero at that point. So there's no practical change, but
elision of the assignment prompts a couple more tweaks to clean up the
function.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/7facacf9d8ca3ca9391a4aee88160913671b868d.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
iptunnel_xmit() erases the contents of the SKB control block. In order to
be able to set particular IPCB flags on the SKB, add a corresponding
parameter, and propagate it to udp_tunnel_xmit_skb() as well.
In one of the following patches, VXLAN driver will use this facility to
mark packets as subject to IP multicast routing.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/89c9daf9f2dc088b6b92ccebcc929f51742de91f.1750113335.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
