phy: ti: alphabetically sort Kconfig and Makefile

Sort alphabetically the entries in the Kconfig and Makefile files.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260518142026.3098496-3-ioana.ciornei@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

2 files changed, 52 insertions, 52 deletions

diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index b40f28019131..dbe65500f20c 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -2,24 +2,29 @@
 #
 # Phy drivers for TI platforms
 #
-config PHY_DA8XX_USB
-	tristate "TI DA8xx USB PHY Driver"
-	depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
-	select GENERIC_PHY
-	select MFD_SYSCON
+config OMAP_CONTROL_PHY
+	tristate "OMAP CONTROL PHY Driver"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	help
-	  Enable this to support the USB PHY on DA8xx SoCs.
-
-	  This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
+	  Enable this to add support for the PHY part present in the control
+	  module. This driver has API to power on the USB2 PHY and to write to
+	  the mailbox. The mailbox is present only in omap4 and the register to
+	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+	  additional register to power on USB3 PHY/SATA PHY/PCIE PHY
+	  (PIPE3 PHY).
 
-config PHY_DM816X_USB
-	tristate "TI dm816x USB PHY driver"
-	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+config OMAP_USB2
+	tristate "OMAP USB2 PHY Driver"
+	depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST
 	depends on USB_SUPPORT
 	select GENERIC_PHY
 	select USB_PHY
+	select OMAP_CONTROL_PHY if ARCH_OMAP2PLUS || COMPILE_TEST
 	help
-	  Enable this for dm816x USB to work.
+	  Enable this to support the transceiver that is part of SOC. This
+	  driver takes care of all the PHY functionality apart from comparator.
+	  The USB OTG controller communicates with the comparator using this
+	  driver.
 
 config PHY_AM654_SERDES
 	tristate "TI AM654 SERDES support"
@@ -33,6 +38,25 @@ config PHY_AM654_SERDES
 	  This option enables support for TI AM654 SerDes PHY used for
 	  PCIe.
 
+config PHY_DA8XX_USB
+	tristate "TI DA8xx USB PHY Driver"
+	depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the USB PHY on DA8xx SoCs.
+
+	  This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
+
+config PHY_DM816X_USB
+	tristate "TI dm816x USB PHY driver"
+	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+	depends on USB_SUPPORT
+	select GENERIC_PHY
+	select USB_PHY
+	help
+	  Enable this for dm816x USB to work.
+
 config PHY_J721E_WIZ
 	tristate "TI J721E WIZ (SERDES Wrapper) support"
 	depends on OF && (ARCH_K3 || COMPILE_TEST)
@@ -49,29 +73,20 @@ config PHY_J721E_WIZ
 	  three clock selects (pll0, pll1, dig) and resets for each of the
 	  lanes.
 
-config OMAP_CONTROL_PHY
-	tristate "OMAP CONTROL PHY Driver"
-	depends on ARCH_OMAP2PLUS || COMPILE_TEST
+config PHY_TI_GMII_SEL
+	tristate
+	select GENERIC_PHY
+	select REGMAP
 	help
-	  Enable this to add support for the PHY part present in the control
-	  module. This driver has API to power on the USB2 PHY and to write to
-	  the mailbox. The mailbox is present only in omap4 and the register to
-	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
-	  additional register to power on USB3 PHY/SATA PHY/PCIE PHY
-	  (PIPE3 PHY).
+	  This driver supports configuring of the TI CPSW Port mode depending on
+	  the Ethernet PHY connected to the CPSW Port.
 
-config OMAP_USB2
-	tristate "OMAP USB2 PHY Driver"
-	depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST
-	depends on USB_SUPPORT
+config PHY_TUSB1210
+	tristate "TI TUSB1210 ULPI PHY module"
+	depends on USB_ULPI_BUS
 	select GENERIC_PHY
-	select USB_PHY
-	select OMAP_CONTROL_PHY if ARCH_OMAP2PLUS || COMPILE_TEST
 	help
-	  Enable this to support the transceiver that is part of SOC. This
-	  driver takes care of all the PHY functionality apart from comparator.
-	  The USB OTG controller communicates with the comparator using this
-	  driver.
+	  Support for TI TUSB1210 USB ULPI PHY.
 
 config TI_PIPE3
 	tristate "TI PIPE3 PHY Driver"
@@ -84,13 +99,6 @@ config TI_PIPE3
 	  This driver interacts with the "OMAP Control PHY Driver" to power
 	  on/off the PHY.
 
-config PHY_TUSB1210
-	tristate "TI TUSB1210 ULPI PHY module"
-	depends on USB_ULPI_BUS
-	select GENERIC_PHY
-	help
-	  Support for TI TUSB1210 USB ULPI PHY.
-
 config TWL4030_USB
 	tristate "TWL4030 USB Transceiver Driver"
 	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
@@ -103,11 +111,3 @@ config TWL4030_USB
 	  family chips (including the TWL5030 and TPS659x0 devices).
 	  This transceiver supports high and full speed devices plus,
 	  in host mode, low speed.
-
-config PHY_TI_GMII_SEL
-	tristate
-	select GENERIC_PHY
-	select REGMAP
-	help
-	  This driver supports configuring of the TI CPSW Port mode depending on
-	  the Ethernet PHY connected to the CPSW Port.
diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
index dcba2571c9bd..975fb8448ba5 100644
--- a/drivers/phy/ti/Makefile
+++ b/drivers/phy/ti/Makefile
@@ -1,11 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_PHY_DA8XX_USB)		+= phy-da8xx-usb.o
-obj-$(CONFIG_PHY_DM816X_USB)		+= phy-dm816x-usb.o
 obj-$(CONFIG_OMAP_CONTROL_PHY)		+= phy-omap-control.o
 obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
-obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
-obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
-obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
 obj-$(CONFIG_PHY_AM654_SERDES)		+= phy-am654-serdes.o
-obj-$(CONFIG_PHY_TI_GMII_SEL)		+= phy-gmii-sel.o
+obj-$(CONFIG_PHY_DA8XX_USB)		+= phy-da8xx-usb.o
+obj-$(CONFIG_PHY_DM816X_USB)		+= phy-dm816x-usb.o
 obj-$(CONFIG_PHY_J721E_WIZ)		+= phy-j721e-wiz.o
+obj-$(CONFIG_PHY_TI_GMII_SEL)		+= phy-gmii-sel.o
+obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
+obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
+obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o