diff options
| author | Bence Csókás <csokas.bence@prolan.hu> | 2025-08-25 14:52:09 +0200 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2025-09-11 10:03:24 +0800 |
| commit | a22a9e1271fb505f2c85d526d05aad5dde2f50e1 (patch) | |
| tree | d3e6ebfac946667433e828695b136bcffc8c880d | |
| parent | 8523931a20b780af752327d248c83ec8896f306b (diff) | |
| download | linux-a22a9e1271fb505f2c85d526d05aad5dde2f50e1.tar.gz linux-a22a9e1271fb505f2c85d526d05aad5dde2f50e1.zip | |
ARM: dts: imx6ul-tx6ul: Switch away from deprecated `phy-reset-gpios`
The Ethernet PHY's reset GPIO should be specified in the node of the PHY
itself, instead of the MAC (`fec`). The latter is deprecated, and was an
i.MX-specific extension, incompatible with the new reset controller
subsystem.
Co-developed-by: Csaba Buday <buday.csaba@prolan.hu>
Signed-off-by: Csaba Buday <buday.csaba@prolan.hu>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| -rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi | 10 |
1 files changed, 8 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi index f053358bc931..5c7e9556b5ce 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi @@ -246,7 +246,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy0>; status = "okay"; @@ -262,6 +261,11 @@ pinctrl-0 = <&pinctrl_etnphy0_int>; interrupt-parent = <&gpio5>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + reset-assert-us = <100>; + reset-deassert-us = <25000>; + /* Energy detect sometimes causes link failures */ + smsc,disable-energy-detect; status = "okay"; }; @@ -272,6 +276,9 @@ pinctrl-0 = <&pinctrl_etnphy1_int>; interrupt-parent = <&gpio4>; interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-assert-us = <100>; + reset-deassert-us = <25000>; status = "okay"; }; }; @@ -281,7 +288,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>; phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3_etn>; phy-handle = <&etnphy1>; status = "disabled"; |