summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>2023-03-09 21:46:01 +0100
committerShawn Guo <shawnguo@kernel.org>2023-03-27 09:47:49 +0800
commitc24a9b698fb02cd0723fa8375abab07f94b97b10 (patch)
tree87f187998d01b71827adb328f172a5ecc5eb9509
parent41d208c4c8dd64c5cf0c8ec9879bacd97b0755d7 (diff)
downloadlinux-c24a9b698fb02cd0723fa8375abab07f94b97b10.tar.gz
linux-c24a9b698fb02cd0723fa8375abab07f94b97b10.zip
arm64: dts: imx8mq-librem5: Set the DVS voltages lower
They're still in the operating range according to i.MX 8M Quad datasheet. There's some headroom added over minimal values to account for voltage drop. Operational ranges (min - typ - max [selected]): - VDD_SOC (BUCK1): 0.81 - 0.9 - 0.99 [0.88] - VDD_ARM (BUCK2): 0.81 - 0.9 - 1.05 [0.84] (1000MHz) 0.90 - 1.0 - 1.05 [0.93] (1500MHz) - VDD_GPU (BUCK3): 0.81 - 0.9 - 1.05 [0.85] (800MHz) 0.90 - 1.0 - 1.05 [ -- ] (1000MHz) - VDD_VPU (BUCK4): 0.81 - 0.9 - 1.05 [ -- ] (550/500/588MHz) 0.90 - 1.0 - 1.05 [0.93] (660/600/800MHz) Idle power consumption doesn't appear to be influenced much, but a simple load test (`cat /dev/urandom | pigz - > /dev/null` combined with running Animatch) seems to show about 0.3W of difference. Care is advised, as there may be differences between each units in how low can they be undervolted - in my experience, reaching that point usually makes the phone fail to boot. In my case, it appears that my Birch phone can go down the most. This is a somewhat conservative set of values that I've seen working well on all my devices; I haven't tried very hard to optimize it, so more experiments are welcome. Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi22
2 files changed, 17 insertions, 7 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
index 4533a84fb0b9..077c5cd2586f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
@@ -7,7 +7,7 @@
&a53_opp_table {
opp-1000000000 {
- opp-microvolt = <1000000>;
+ opp-microvolt = <950000>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 509776a63259..eaf35cff2f8a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -839,8 +839,8 @@
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-ramp-delay = <1250>;
- rohm,dvs-run-voltage = <900000>;
- rohm,dvs-idle-voltage = <850000>;
+ rohm,dvs-run-voltage = <880000>;
+ rohm,dvs-idle-voltage = <820000>;
rohm,dvs-suspend-voltage = <800000>;
regulator-always-on;
};
@@ -851,8 +851,8 @@
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-ramp-delay = <1250>;
- rohm,dvs-run-voltage = <1000000>;
- rohm,dvs-idle-voltage = <900000>;
+ rohm,dvs-run-voltage = <950000>;
+ rohm,dvs-idle-voltage = <850000>;
regulator-always-on;
};
@@ -861,14 +861,14 @@
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
- rohm,dvs-run-voltage = <900000>;
+ rohm,dvs-run-voltage = <850000>;
};
buck4_reg: BUCK4 {
regulator-name = "buck4";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
- rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-run-voltage = <930000>;
};
buck5_reg: BUCK5 {
@@ -1403,3 +1403,13 @@
fsl,ext-reset-output;
status = "okay";
};
+
+&a53_opp_table {
+ opp-1000000000 {
+ opp-microvolt = <850000>;
+ };
+
+ opp-1500000000 {
+ opp-microvolt = <950000>;
+ };
+};