diff options
| author | Paul Kocialkowski <paulk@sys-base.io> | 2026-04-02 20:36:26 +0200 |
|---|---|---|
| committer | Frank Li <Frank.Li@nxp.com> | 2026-05-05 15:29:19 -0400 |
| commit | e556f564a04fb6dd37887b5d098e2a0145f2bc9d (patch) | |
| tree | 81d81852d3300cac656113f62e2b1662e97f3d06 | |
| parent | eb27f9b9a4b2965f8d497a3c565cfbc2473c184b (diff) | |
| download | linux-e556f564a04fb6dd37887b5d098e2a0145f2bc9d.tar.gz linux-e556f564a04fb6dd37887b5d098e2a0145f2bc9d.zip | |
arm64: dts: imx8mp-phyboard-pollux: Add HDMI support
The PHYTEC phyBOARD Pollux comes with a HDMI port on the base board.
Add the required device-tree nodes to enable support for it, including
both the video and the audio paths.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 62 |
1 files changed, 62 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index 0fe52c73fc8f..4efdc6bdfe12 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -38,6 +38,18 @@ #cooling-cells = <2>; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + panel_lvds1: panel-lvds1 { /* compatible panel in overlay */ backlight = <&backlight_lvds1>; @@ -126,6 +138,13 @@ regulator-name = "VCC_1V8_EXP_CON"; }; + sound-hdmi { + compatible = "fsl,imx-audio-hdmi"; + model = "audio-hdmi"; + audio-cpu = <&aud2htx>; + hdmi-out; + }; + thermal-zones { soc-thermal { trips { @@ -146,6 +165,10 @@ }; }; +&aud2htx { + status = "okay"; +}; + /* TPM */ &ecspi1 { #address-cells = <1>; @@ -201,6 +224,32 @@ status = "okay"; }; +&hdmi_pai { + status = "okay"; +}; + +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; @@ -244,6 +293,10 @@ scl-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; +&lcdif3 { + status = "okay"; +}; + &ldb_lvds_ch1 { remote-endpoint = <&panel1_in>; }; @@ -444,6 +497,15 @@ >; }; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c3 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c3 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19 + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x19 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 |