Merge tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "This round of updates contains a fair amount of new device support, a
  couple of fixes and some refactoring. The most notable additions
  include new drivers for Loongson's Security Engine, RNG and TPM, new
  drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.

  The rest of the set provides a return value check fix and a
  refactoring to use a more modern GPIO API for the VEXPRESS sysreg
  driver, the removal of a deprecated IRQ ACK function from the MC13xxx
  RTC driver and a new DT binding for the aforementioned TI BQ257xx
  charger.

  New Support & Features:
   - Add a suite of drivers for the Loongson Security Engine, including
     the core controller, a Random Number Generator (RNG) and Trusted
     Platform Module (TPM) support.
   - Introduce support for the TI TPS6594 PMIC's power button, including
     the input driver, MFD cell registration, and a system power-off
     handler.
   - Add comprehensive support for the TI BQ257xx series of charger ICs,
     including the core MFD driver and a power supply driver for the
     charger functionality.

  Improvements & Fixes:
   - Check the return value of devm_gpiochip_add_data() in the VEXPRESS
     sysreg driver to prevent potential silent failures.

  Cleanups & Refactoring:
   - Add a MAINTAINERS entry for the new Loongson Security Engine
     drivers.
   - Convert the VEXPRESS sysreg driver to use the modern generic GPIO
     chip API.

  Removals:
   - Remove the deprecated and unused mc13xxx_irq_ack() function from
     the MC13xxx RTC, input and touchscreen drivers.

  Device Tree Bindings Updates:
   - Add device tree bindings for the TI BQ25703A charger"

* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
  mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
  dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
  dt-bindings: watchdog: Add SMARC-sAM67 support
  dt-bindings: mfd: tps6594: Allow gpio-line-names
  mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
  mfd: 88pm886: Add GPADC cell
  mfd: vexpress-sysreg: Use more common syntax for compound literals
  mfd: rz-mtu3: Fix MTU5 NFCR register offset
  mfd: max77705: Setup the core driver as an interrupt controller
  mfd: cs42l43: Remove IRQ masking in suspend
  mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
  mfd: ls2kbmc: Add Loongson-2K BMC reset function support
  mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
  mfd: bd71828, bd71815: Prepare for power-supply support
  dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
  dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
  dt-bindings: mfd: fsl,mc13xxx: Add buttons node
  dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
  mfd: macsmc: Add "apple,t8103-smc" compatible
  ...

29 files changed, 836 insertions, 349 deletions

diff --git a/Documentation/devicetree/bindings/platform/acer,aspire1-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/acer,aspire1-ec.yaml
index 7cb0134134ff..01ee61768527 100644
--- a/Documentation/devicetree/bindings/platform/acer,aspire1-ec.yaml
+++ b/Documentation/devicetree/bindings/embedded-controller/acer,aspire1-ec.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/platform/acer,aspire1-ec.yaml#
+$id: http://devicetree.org/schemas/embedded-controller/acer,aspire1-ec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Acer Aspire 1 Embedded Controller
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/google,cros-ec.yaml
index 50f457090066..3ab5737c9a8f 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/embedded-controller/google,cros-ec.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/mfd/google,cros-ec.yaml#
+$id: http://devicetree.org/schemas/embedded-controller/google,cros-ec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ChromeOS Embedded Controller
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/embedded-controller/gw,gsc.yaml
index dc379f3ebf24..82d4b2dadbae 100644
--- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ b/Documentation/devicetree/bindings/embedded-controller/gw,gsc.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
+$id: http://devicetree.org/schemas/embedded-controller/gw,gsc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Gateworks System Controller
diff --git a/Documentation/devicetree/bindings/platform/huawei,gaokun-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/huawei,gaokun3-ec.yaml
index 4a03b0ee3149..cd9e65b6c2ea 100644
--- a/Documentation/devicetree/bindings/platform/huawei,gaokun-ec.yaml
+++ b/Documentation/devicetree/bindings/embedded-controller/huawei,gaokun3-ec.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/platform/huawei,gaokun-ec.yaml#
+$id: http://devicetree.org/schemas/embedded-controller/huawei,gaokun3-ec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Huawei Matebook E Go Embedded Controller
diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/embedded-controller/kontron,sl28cpld.yaml
index 37207a97e06c..a77e67f6cb82 100644
--- a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
+++ b/Documentation/devicetree/bindings/embedded-controller/kontron,sl28cpld.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
+$id: http://devicetree.org/schemas/embedded-controller/kontron,sl28cpld.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Kontron's sl28cpld board management controller
@@ -16,7 +16,12 @@ description: |
 
 properties:
   compatible:
-    const: kontron,sl28cpld
+    oneOf:
+      - items:
+          - enum:
+              - kontron,sa67mcu
+          - const: kontron,sl28cpld
+      - const: kontron,sl28cpld
 
   reg:
     description:
diff --git a/Documentation/devicetree/bindings/platform/lenovo,yoga-c630-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/lenovo,yoga-c630-ec.yaml
index 3180ce1a22d4..a029b38e8dc0 100644
--- a/Documentation/devicetree/bindings/platform/lenovo,yoga-c630-ec.yaml
+++ b/Documentation/devicetree/bindings/embedded-controller/lenovo,yoga-c630-ec.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/platform/lenovo,yoga-c630-ec.yaml#
+$id: http://devicetree.org/schemas/embedded-controller/lenovo,yoga-c630-ec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Lenovo Yoga C630 Embedded Controller.
diff --git a/Documentation/devicetree/bindings/platform/microsoft,surface-sam.yaml b/Documentation/devicetree/bindings/embedded-controller/microsoft,surface-sam.yaml
index b33d26f15b2a..9202cfca0b35 100644
--- a/Documentation/devicetree/bindings/platform/microsoft,surface-sam.yaml
+++ b/Documentation/devicetree/bindings/embedded-controller/microsoft,surface-sam.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/platform/microsoft,surface-sam.yaml#
+$id: http://devicetree.org/schemas/embedded-controller/microsoft,surface-sam.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Surface System Aggregator Module (SAM, SSAM)
diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
index b032471831e7..02663d67eac7 100644
--- a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: |
   This module is part of the sl28cpld multi-function device. For more
-  details see ../mfd/kontron,sl28cpld.yaml.
+  details see ../embedded-controller/kontron,sl28cpld.yaml.
 
   There are three flavors of the GPIO controller, one full featured
   input/output with interrupt support (kontron,sl28cpld-gpio), one
diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
index ec20625db454..966b221b6caa 100644
--- a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
+++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: |
   This module is part of the sl28cpld multi-function device. For more
-  details see ../mfd/kontron,sl28cpld.yaml.
+  details see ../embedded-controller/kontron,sl28cpld.yaml.
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
index e8dfa6507f64..87df07beda59 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: |
   This module is part of the sl28cpld multi-function device. For more
-  details see ../mfd/kontron,sl28cpld.yaml.
+  details see ../embedded-controller/kontron,sl28cpld.yaml.
 
   The following interrupts are available. All types and levels are fixed
   and handled by the board management controller.
diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
index 67be6d095fe4..da1887d7a8fe 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
+++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
@@ -48,8 +48,34 @@ properties:
 
 patternProperties:
   '^p2a-control@[0-9a-f]+$':
-    description: See Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
+    description: >
+      PCI-to-AHB Bridge Control
+
+      The bridge is available on platforms with the VGA enabled on the Aspeed
+      device. In this case, the host has access to a 64KiB window into all of
+      the BMC's memory. The BMC can disable this bridge. If the bridge is
+      enabled, the host has read access to all the regions of memory, however
+      the host only has read and write access depending on a register
+      controlled by the BMC.
     type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - aspeed,ast2400-p2a-ctrl
+          - aspeed,ast2500-p2a-ctrl
+      reg:
+        maxItems: 1
+
+      memory-region:
+        maxItems: 1
+        description:
+          A reserved_memory region to be used for the PCI to AHB mapping
+
+    required:
+      - compatible
+      - reg
 
   '^pinctrl(@[0-9a-f]+)?$':
     type: object
@@ -127,6 +153,11 @@ examples:
         #size-cells = <1>;
         ranges = <0x0 0x1e6e2000 0x1000>;
 
+        p2a-control@2c {
+            compatible = "aspeed,ast2400-p2a-ctrl";
+            reg = <0x2c 0x4>;
+        };
+
         silicon-id@7c {
             compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
             reg = <0x7c 0x4>, <0x150 0x8>;
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
index d88854e60b7f..f329223cec07 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
@@ -137,6 +137,9 @@ patternProperties:
       reg:
         maxItems: 1
 
+      clocks:
+        maxItems: 1
+
       interrupts:
         maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml b/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml
new file mode 100644
index 000000000000..d2886f2686a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml
@@ -0,0 +1,288 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/fsl,mc13xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MC13xxx Power Management Integrated Circuits (PMIC)
+
+maintainers:
+  - Alexander Kurz <akurz@blala.de>
+
+description: >
+  The MC13xxx PMIC series consists of the three models MC13783, MC13892
+  and MC34708 and provide regulators and other features like RTC, ADC,
+  LED, touchscreen, codec and input buttons.
+
+  Link to datasheets
+    https://www.nxp.com/docs/en/data-sheet/MC13783.pdf
+    https://www.nxp.com/docs/en/data-sheet/MC13892.pdf
+    https://www.nxp.com/docs/en/data-sheet/MC34708.pdf
+
+properties:
+  compatible:
+    enum:
+      - fsl,mc13783
+      - fsl,mc13892
+      - fsl,mc34708
+
+  reg:
+    description: I2C slave address or SPI chip select number.
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  spi-cs-high: true
+
+  system-power-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  buttons:
+    type: object
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^onkey@[0-2]$":
+        $ref: /schemas/input/input.yaml#
+        unevaluatedProperties: false
+        type: object
+
+        properties:
+          reg:
+            description: |
+              One of
+              MC13783 BUTTON IDs:
+                0: ONOFD1
+                1: ONOFD2
+                2: ONOFD3
+
+              MC13892 BUTTON IDs:
+                0: PWRON1
+                1: PWRON2
+                2: PWRON3
+
+              MC34708 BUTTON IDs:
+                0: PWRON1
+                1: PWRON2
+            maximum: 2
+
+          debounce-delay-ms:
+            enum: [0, 30, 150, 750]
+            default: 30
+            description:
+              Sets the debouncing delay in milliseconds.
+
+          active-low:
+            description: Set active when pin is pulled low.
+
+          linux,code: true
+
+          fsl,enable-reset:
+            description:
+              Setting of the global reset option.
+            type: boolean
+
+    unevaluatedProperties: false
+
+  leds:
+    type: object
+    $ref: /schemas/leds/common.yaml#
+
+    properties:
+      reg:
+        description: |
+          One of
+          MC13783 LED IDs
+            0: Main display
+            1: AUX display
+            2: Keypad
+            3: Red 1
+            4: Green 1
+            5: Blue 1
+            6: Red 2
+            7: Green 2
+            8: Blue 2
+            9: Red 3
+            10: Green 3
+            11: Blue 3
+
+          MC13892 LED IDs
+            0: Main display
+            1: AUX display
+            2: Keypad
+            3: Red
+            4: Green
+            5: Blue
+
+          MC34708 LED IDs
+            0: Charger Red
+            1: Charger Green
+        maxItems: 1
+
+      led-control:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: |
+          Setting for LED-Control register array length depends on model,
+          mc13783: 6, mc13892: 4, mc34708: 1
+
+  regulators:
+    type: object
+
+    additionalProperties:
+      type: object
+
+    description: |
+      List of child nodes specifying the regulators, depending on chip variant.
+      Each child node is defined using the standard binding for regulators and
+      the optional regulator properties defined below.
+
+  fsl,mc13xxx-uses-adc:
+    type: boolean
+    description: Indicate the ADC is being used
+
+  fsl,mc13xxx-uses-codec:
+    type: boolean
+    description: Indicate the Audio Codec is being used
+
+  fsl,mc13xxx-uses-rtc:
+    type: boolean
+    description: Indicate the RTC is being used
+
+  fsl,mc13xxx-uses-touch:
+    type: boolean
+    description: Indicate the touchscreen controller is being used
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,mc13783
+    then:
+      properties:
+        leds:
+          properties:
+            led-control:
+              minItems: 6
+              maxItems: 6
+        regulators:
+          patternProperties:
+            "^gpo[1-4]|pwgt[12]spi|sw[12][ab]|sw3|vaudio|vcam|vdig|vesim|vgen|viohi|violo|vmmc[12]|vrf[12]|vrfbg|vrfcp|vrfdig|vrfref|vsim|vvib$":
+              type: object
+              $ref: /schemas/regulator/regulator.yaml#
+
+              unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,mc13892
+    then:
+      properties:
+        leds:
+          properties:
+            led-control:
+              minItems: 4
+              maxItems: 4
+        regulators:
+          patternProperties:
+            "^gpo[1-4]|pwgt[12]spi|sw[1-4]|swbst|vaudio|vcam|vcoincell|vdig|vgen[1-3]|viohi|vpll|vsd|vusb|vusb2|vvideo$":
+              type: object
+              $ref: /schemas/regulator/regulator.yaml#
+
+              unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,mc34708
+    then:
+      properties:
+        buttons:
+          patternProperties:
+            "^onkey@[0-2]$":
+              properties:
+                reg:
+                  maximum: 1
+        leds:
+          properties:
+            led-control:
+              minItems: 1
+              maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic: mc13892@0 {
+            compatible = "fsl,mc13892";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cs-high;
+            interrupt-parent = <&gpio0>;
+            interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+            fsl,mc13xxx-uses-rtc;
+            fsl,mc13xxx-uses-adc;
+
+            buttons {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                onkey@0 {
+                    reg = <0>;
+                    debounce-delay-ms = <30>;
+                    active-low;
+                    fsl,enable-reset;
+                };
+            };
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                led-control = <0x000 0x000 0x0e0 0x000>;
+
+                sysled@3 {
+                    reg = <3>;
+                    label = "system:red:live";
+                    linux,default-trigger = "heartbeat";
+                };
+            };
+
+            regulators {
+                sw1_reg: sw1 {
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <1375000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw2_reg: sw2 {
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1850000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
deleted file mode 100644
index 8261ea73278a..000000000000
--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ /dev/null
@@ -1,156 +0,0 @@
-* Freescale MC13783/MC13892 Power Management Integrated Circuit (PMIC)
-
-Required properties:
-- compatible : Should be "fsl,mc13783" or "fsl,mc13892"
-
-Optional properties:
-- fsl,mc13xxx-uses-adc : Indicate the ADC is being used
-- fsl,mc13xxx-uses-codec : Indicate the Audio Codec is being used
-- fsl,mc13xxx-uses-rtc : Indicate the RTC is being used
-- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
-
-Sub-nodes:
-- codec: Contain the Audio Codec node.
-  - adc-port: Contain PMIC SSI port number used for ADC.
-  - dac-port: Contain PMIC SSI port number used for DAC.
-- leds : Contain the led nodes and initial register values in property
-  "led-control". Number of register depends of used IC, for MC13783 is 6,
-  for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of
-  these registers.
-  - #address-cells: Must be 1.
-  - #size-cells: Must be 0.
-  Each led node should contain "reg", which used as LED ID (described below).
-  Optional properties "label" and "linux,default-trigger" is described in
-  Documentation/devicetree/bindings/leds/common.txt.
-- regulators : Contain the regulator nodes. The regulators are bound using
-  their names as listed below with their registers and bits for enabling.
-
-MC13783 LED IDs:
-    0  : Main display
-    1  : AUX display
-    2  : Keypad
-    3  : Red 1
-    4  : Green 1
-    5  : Blue 1
-    6  : Red 2
-    7  : Green 2
-    8  : Blue 2
-    9  : Red 3
-    10 : Green 3
-    11 : Blue 3
-
-MC13892 LED IDs:
-    0  : Main display
-    1  : AUX display
-    2  : Keypad
-    3  : Red
-    4  : Green
-    5  : Blue
-
-MC34708 LED IDs:
-    0  : Charger Red
-    1  : Charger Green
-
-MC13783 regulators:
-    sw1a      : regulator SW1A      (register 24, bit 0)
-    sw1b      : regulator SW1B      (register 25, bit 0)
-    sw2a      : regulator SW2A      (register 26, bit 0)
-    sw2b      : regulator SW2B      (register 27, bit 0)
-    sw3       : regulator SW3       (register 29, bit 20)
-    vaudio    : regulator VAUDIO    (register 32, bit 0)
-    viohi     : regulator VIOHI     (register 32, bit 3)
-    violo     : regulator VIOLO     (register 32, bit 6)
-    vdig      : regulator VDIG      (register 32, bit 9)
-    vgen      : regulator VGEN      (register 32, bit 12)
-    vrfdig    : regulator VRFDIG    (register 32, bit 15)
-    vrfref    : regulator VRFREF    (register 32, bit 18)
-    vrfcp     : regulator VRFCP     (register 32, bit 21)
-    vsim      : regulator VSIM      (register 33, bit 0)
-    vesim     : regulator VESIM     (register 33, bit 3)
-    vcam      : regulator VCAM      (register 33, bit 6)
-    vrfbg     : regulator VRFBG     (register 33, bit 9)
-    vvib      : regulator VVIB      (register 33, bit 11)
-    vrf1      : regulator VRF1      (register 33, bit 12)
-    vrf2      : regulator VRF2      (register 33, bit 15)
-    vmmc1     : regulator VMMC1     (register 33, bit 18)
-    vmmc2     : regulator VMMC2     (register 33, bit 21)
-    gpo1      : regulator GPO1      (register 34, bit 6)
-    gpo2      : regulator GPO2      (register 34, bit 8)
-    gpo3      : regulator GPO3      (register 34, bit 10)
-    gpo4      : regulator GPO4      (register 34, bit 12)
-    pwgt1spi  : regulator PWGT1SPI  (register 34, bit 15)
-    pwgt2spi  : regulator PWGT2SPI  (register 34, bit 16)
-
-MC13892 regulators:
-    vcoincell : regulator VCOINCELL (register 13, bit 23)
-    sw1       : regulator SW1	    (register 24, bit 0)
-    sw2       : regulator SW2	    (register 25, bit 0)
-    sw3       : regulator SW3	    (register 26, bit 0)
-    sw4       : regulator SW4	    (register 27, bit 0)
-    swbst     : regulator SWBST	    (register 29, bit 20)
-    vgen1     : regulator VGEN1	    (register 32, bit 0)
-    viohi     : regulator VIOHI	    (register 32, bit 3)
-    vdig      : regulator VDIG	    (register 32, bit 9)
-    vgen2     : regulator VGEN2	    (register 32, bit 12)
-    vpll      : regulator VPLL	    (register 32, bit 15)
-    vusb2     : regulator VUSB2	    (register 32, bit 18)
-    vgen3     : regulator VGEN3	    (register 33, bit 0)
-    vcam      : regulator VCAM	    (register 33, bit 6)
-    vvideo    : regulator VVIDEO    (register 33, bit 12)
-    vaudio    : regulator VAUDIO    (register 33, bit 15)
-    vsd       : regulator VSD	    (register 33, bit 18)
-    gpo1      : regulator GPO1	    (register 34, bit 6)
-    gpo2      : regulator GPO2	    (register 34, bit 8)
-    gpo3      : regulator GPO3	    (register 34, bit 10)
-    gpo4      : regulator GPO4	    (register 34, bit 12)
-    pwgt1spi  : regulator PWGT1SPI  (register 34, bit 15)
-    pwgt2spi  : regulator PWGT2SPI  (register 34, bit 16)
-    vusb      : regulator VUSB	    (register 50, bit 3)
-
-  The bindings details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-Examples:
-
-ecspi@70010000 { /* ECSPI1 */
-	cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
-		   <&gpio4 25 0>; /* GPIO4_25 */
-
-	pmic: mc13892@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,mc13892";
-		spi-max-frequency = <6000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <8>;
-
-		leds {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			led-control = <0x000 0x000 0x0e0 0x000>;
-
-			sysled@3 {
-				reg = <3>;
-				label = "system:red:live";
-				linux,default-trigger = "heartbeat";
-			};
-		};
-
-		regulators {
-			sw1_reg: mc13892__sw1 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1375000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: mc13892__sw2 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml b/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml
index 877078ac172f..5454d9403cad 100644
--- a/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml
+++ b/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml
@@ -16,8 +16,12 @@ description:
 properties:
   compatible:
     enum:
+      - qnap,ts233-mcu
       - qnap,ts433-mcu
 
+  nvmem-layout:
+    $ref: /schemas/nvmem/layouts/nvmem-layout.yaml
+
 patternProperties:
   "^fan-[0-9]+$":
     $ref: /schemas/hwmon/fan-common.yaml#
diff --git a/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
new file mode 100644
index 000000000000..c6593ac6ef6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/spacemit,p1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT P1 Power Management Integrated Circuit
+
+maintainers:
+  - Troy Mitchell <troy.mitchell@linux.spacemit.com>
+
+description:
+  P1 is an I2C-controlled PMIC produced by SpacemiT.  It implements six
+  constant-on-time buck converters and twelve low-dropout regulators.
+  It also contains a load switch, watchdog timer, real-time clock, eight
+  12-bit ADC channels, and six GPIOs.  Additional details are available
+  in the "Power Stone/P1" section at the following link.
+    https://developer.spacemit.com/documentation
+
+properties:
+  compatible:
+    const: spacemit,p1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vin-supply:
+    description: Input supply phandle.
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^(buck[1-6]|aldo[1-4]|dldo[1-7])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@41 {
+            compatible = "spacemit,p1";
+            reg = <0x41>;
+            interrupts = <64>;
+
+            regulators {
+                buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <3450000>;
+                    regulator-ramp-delay = <5000>;
+                    regulator-always-on;
+                };
+
+                aldo1 {
+                    regulator-name = "aldo1";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                };
+
+                dldo1 {
+                    regulator-name = "dldo1";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <3400000>;
+                    regulator-boot-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index 27672adeb1fe..657c38175fba 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -79,6 +79,7 @@ select:
           - marvell,armada-3700-cpu-misc
           - marvell,armada-3700-nb-pm
           - marvell,armada-3700-avs
+          - marvell,armada-3700-usb2-host-device-misc
           - marvell,armada-3700-usb2-host-misc
           - marvell,dove-global-config
           - mediatek,mt2701-pctl-a-syscfg
@@ -90,6 +91,7 @@ select:
           - mediatek,mt8173-pctl-a-syscfg
           - mediatek,mt8365-syscfg
           - microchip,lan966x-cpu-syscon
+          - microchip,mpfs-control-scb
           - microchip,mpfs-sysreg-scb
           - microchip,sam9x60-sfr
           - microchip,sama7d65-ddr3phy
@@ -185,6 +187,7 @@ properties:
           - marvell,armada-3700-cpu-misc
           - marvell,armada-3700-nb-pm
           - marvell,armada-3700-avs
+          - marvell,armada-3700-usb2-host-device-misc
           - marvell,armada-3700-usb2-host-misc
           - marvell,dove-global-config
           - mediatek,mt2701-pctl-a-syscfg
@@ -197,6 +200,7 @@ properties:
           - mediatek,mt8365-infracfg-nao
           - mediatek,mt8365-syscfg
           - microchip,lan966x-cpu-syscon
+          - microchip,mpfs-control-scb
           - microchip,mpfs-sysreg-scb
           - microchip,sam9x60-sfr
           - microchip,sama7d65-ddr3phy
diff --git a/Documentation/devicetree/bindings/mfd/ti,bq25703a.yaml b/Documentation/devicetree/bindings/mfd/ti,bq25703a.yaml
new file mode 100644
index 000000000000..ba14663c9266
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,bq25703a.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,bq25703a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BQ25703A Charger Manager/Buck/Boost Converter
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: /schemas/power/supply/power-supply.yaml#
+
+properties:
+  compatible:
+    const: ti,bq25703a
+
+  reg:
+    const: 0x6b
+
+  input-current-limit-microamp:
+    description:
+      Maximum total input current allowed used for both charging and
+      powering the device.
+    minimum: 50000
+    maximum: 6400000
+    default: 3250000
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery:
+    description:
+      A minimum of constant-charge-current-max-microamp,
+      constant-charge-voltage-max-microvolt, and
+      voltage-min-design-microvolt are required.
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description:
+      Boost converter regulator output of bq257xx.
+
+    properties:
+      vbus:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml
+        additionalProperties: false
+
+        properties:
+          regulator-name: true
+          regulator-min-microamp:
+            minimum: 0
+            maximum: 6350000
+          regulator-max-microamp:
+            minimum: 0
+            maximum: 6350000
+          regulator-min-microvolt:
+            minimum: 4480000
+            maximum: 20800000
+          regulator-max-microvolt:
+            minimum: 4480000
+            maximum: 20800000
+          enable-gpios:
+            description:
+              The BQ25703 may require both a register write and a GPIO
+              toggle to enable the boost regulator.
+
+        required:
+          - regulator-name
+          - regulator-min-microamp
+          - regulator-max-microamp
+          - regulator-min-microvolt
+          - regulator-max-microvolt
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - input-current-limit-microamp
+  - monitored-battery
+  - power-supplies
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bq25703: charger@6b {
+            compatible = "ti,bq25703a";
+            reg = <0x6b>;
+            input-current-limit-microamp = <5000000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <RK_PD5 IRQ_TYPE_LEVEL_LOW>;
+            monitored-battery = <&battery>;
+            power-supplies = <&fusb302>;
+
+            regulators {
+                usb_otg_vbus: vbus {
+                    enable-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+                    regulator-max-microamp = <960000>;
+                    regulator-max-microvolt = <5088000>;
+                    regulator-min-microamp = <512000>;
+                    regulator-min-microvolt = <4992000>;
+                    regulator-name = "usb_otg_vbus";
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
index a48cb00afe43..ca17fbdea691 100644
--- a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
@@ -41,6 +41,7 @@ properties:
   system-power-controller: true
 
   gpio-controller: true
+  gpio-line-names: true
 
   '#gpio-cells':
     const: 2
diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
index f162ab60c09b..776b04e182cb 100644
--- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
@@ -11,9 +11,9 @@ maintainers:
 
 description: |
   The TWLs are Integrated Power Management Chips.
-  Some version might contain much more analog function like
+  Some versions might contain much more analog functions like
   USB transceiver or Audio amplifier.
-  These chips are connected to an i2c bus.
+  These chips are connected to an I2C bus.
 
 allOf:
   - if:
@@ -49,33 +49,14 @@ allOf:
             ti,retain-on-reset: false
 
       properties:
-        madc:
-          type: object
-          $ref: /schemas/iio/adc/ti,twl4030-madc.yaml
-          unevaluatedProperties: false
-
         charger:
-          type: object
           $ref: /schemas/power/supply/twl4030-charger.yaml
           unevaluatedProperties: false
 
-        pwrbutton:
-          type: object
-          additionalProperties: false
-          properties:
-            compatible:
-              const: ti,twl4030-pwrbutton
-            interrupts:
-              items:
-                - items:
-                    const: 8
-
-        watchdog:
-          type: object
-          additionalProperties: false
-          properties:
-            compatible:
-              const: ti,twl4030-wdt
+        gpadc: false
+
+        usb-comparator: false
+
   - if:
       properties:
         compatible:
@@ -106,15 +87,30 @@ allOf:
 
       properties:
         charger:
-          type: object
-          properties:
-            compatible:
-              const: ti,twl6030-charger
+          $ref: /schemas/power/supply/ti,twl6030-charger.yaml
+          unevaluatedProperties: false
+
         gpadc:
-          type: object
           properties:
             compatible:
               const: ti,twl6030-gpadc
+
+        pwrbutton: false
+
+        madc: false
+
+        watchdog: false
+
+        audio: false
+
+        keypad: false
+
+        twl4030-usb: false
+
+        gpio: false
+
+        power: false
+
   - if:
       properties:
         compatible:
@@ -142,23 +138,36 @@ allOf:
 
       properties:
         charger:
-          type: object
-          properties:
-            compatible:
-              items:
-                - const: ti,twl6032-charger
-                - const: ti,twl6030-charger
+          $ref: /schemas/power/supply/ti,twl6030-charger.yaml
+          unevaluatedProperties: false
+
         gpadc:
-          type: object
           properties:
             compatible:
               const: ti,twl6032-gpadc
 
+        pwrbutton: false
+
+        madc: false
+
+        watchdog: false
+
+        audio: false
+
+        keypad: false
+
+        twl4030-usb: false
+
+        gpio: false
+
+        power: false
+
 properties:
   compatible:
-    description:
-      TWL4030 for integrated power-management/audio CODEC device used in OMAP3
-      based boards
+    description: >
+      TWL4030 for integrated power-management/audio CODEC device used in
+      OMAP3 based boards.
+
       TWL6030/32 for integrated power-management used in OMAP4 based boards
     enum:
       - ti,twl4030
@@ -181,28 +190,221 @@ properties:
   "#clock-cells":
     const: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
   charger:
     type: object
-    additionalProperties: true
+
     properties:
       compatible: true
+
     required:
       - compatible
 
   rtc:
     type: object
     additionalProperties: false
+
     properties:
       compatible:
         const: ti,twl4030-rtc
       interrupts:
         maxItems: 1
 
+  madc:
+    type: object
+    $ref: /schemas/iio/adc/ti,twl4030-madc.yaml
+    unevaluatedProperties: false
+
+  pwrbutton:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: ti,twl4030-pwrbutton
+      interrupts:
+        items:
+          - items:
+              const: 8
+
+  watchdog:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: ti,twl4030-wdt
+
+  audio:
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: ti,twl4030-audio
+
+    required:
+      - compatible
+
+  keypad:
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: ti,twl4030-keypad
+
+    required:
+      - compatible
+
+  twl4030-usb:
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: ti,twl4030-usb
+
+    required:
+      - compatible
+
+  gpio:
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: ti,twl4030-gpio
+
+    required:
+      - compatible
+
+  power:
+    type: object
+    additionalProperties: false
+    description: >
+      The power management module inside the TWL4030 provides several
+      facilities to control the power resources, including power scripts.
+
+      For now, the binding only supports the complete shutdown of the
+      system after poweroff.
+
+      Board-specific compatible strings may be used for platform-specific
+      power configurations.
+
+      A board-specific compatible string (e.g., ti,twl4030-power-omap3-evm)
+      may be paired with a generic fallback (generally for power saving mode).
+
+    properties:
+      compatible:
+        oneOf:
+          # Case 1: A single compatible string is provided.
+          - enum:
+              - ti,twl4030-power
+              - ti,twl4030-power-reset
+              - ti,twl4030-power-idle
+              - ti,twl4030-power-idle-osc-off
+              - ti,twl4030-power-omap3-sdp
+              - ti,twl4030-power-omap3-ldp
+              - ti,twl4030-power-omap3-evm
+
+          # Case 2: The specific, valid fallback for 'idle-osc-off'.
+          - items:
+              - const: ti,twl4030-power-idle-osc-off
+              - const: ti,twl4030-power-idle
+
+          # Case 3: The specific, valid fallback for 'omap3-evm'.
+          - items:
+              - const: ti,twl4030-power-omap3-evm
+              - const: ti,twl4030-power-idle
+
+      ti,system-power-controller:
+        type: boolean
+        deprecated: true
+        description: >
+          DEPRECATED. The standard 'system-power-controller'
+          property on the parent node should be used instead.
+
+      ti,use_poweroff:
+        type: boolean
+        deprecated: true
+        description: DEPRECATED, to be removed.
+
+    required:
+      - compatible
+
+  gpadc:
+    type: object
+    $ref: /schemas/iio/adc/ti,twl6030-gpadc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      compatible: true
+
+  usb-comparator:
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: ti,twl6030-usb
+
+    required:
+      - compatible
+
+  pwm:
+    type: object
+    $ref: /schemas/pwm/pwm.yaml#
+    unevaluatedProperties: false
+    description:
+      PWM controllers (PWM1 and PWM2 on TWL4030, PWM0 and PWM1 on TWL6030/32).
+
+    properties:
+      compatible:
+        enum:
+          - ti,twl4030-pwm
+          - ti,twl6030-pwm
+
+      '#pwm-cells':
+        const: 2
+
+    required:
+      - compatible
+      - '#pwm-cells'
+
+  pwmled:
+    type: object
+    $ref: /schemas/pwm/pwm.yaml#
+    unevaluatedProperties: false
+    description: >
+      PWM controllers connected to LED terminals (PWMA and PWMB on TWL4030.
+
+      LED PWM on TWL6030/32, mainly used as charging indicator LED).
+
+    properties:
+      compatible:
+        enum:
+          - ti,twl4030-pwmled
+          - ti,twl6030-pwmled
+
+      '#pwm-cells':
+        const: 2
+
+    required:
+      - compatible
+      - '#pwm-cells'
+
 patternProperties:
   "^regulator-":
     type: object
     unevaluatedProperties: false
     $ref: /schemas/regulator/regulator.yaml
+
     properties:
       compatible: true
       regulator-initial-mode:
@@ -211,12 +413,13 @@ patternProperties:
                  # with low power consumption with low load current capability
           - 0x0e # Active mode, the regulator can deliver its nominal output
                  # voltage with full-load current capability
+
       ti,retain-on-reset:
-        description:
-          Does not turn off the supplies during warm
-          reset. Could be needed for VMMC, as TWL6030
-          reset sequence for this signal does not comply
-          with the SD specification.
+        description: >
+          Does not turn off the supplies during warm reset.
+
+          Could be needed for VMMC, as TWL6030 reset sequence for
+          this signal does not comply with the SD specification.
         type: boolean
 
 unevaluatedProperties: false
@@ -271,6 +474,16 @@ examples:
           compatible = "ti,twl6030-vmmc";
           ti,retain-on-reset;
         };
+
+        pwm {
+          compatible = "ti,twl6030-pwm";
+          #pwm-cells = <2>;
+        };
+
+        pwmled {
+          compatible = "ti,twl6030-pwmled";
+          #pwm-cells = <2>;
+        };
       };
     };
 
@@ -325,6 +538,20 @@ examples:
         watchdog {
           compatible = "ti,twl4030-wdt";
         };
+
+        power {
+          compatible = "ti,twl4030-power";
+        };
+
+        pwm {
+          compatible = "ti,twl4030-pwm";
+          #pwm-cells = <2>;
+        };
+
+        pwmled {
+          compatible = "ti,twl4030-pwmled";
+          #pwm-cells = <2>;
+        };
       };
     };
 ...
diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
deleted file mode 100644
index 3d19963312ce..000000000000
--- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Texas Instruments TWL family (twl4030) reset and power management module
-
-The power management module inside the TWL family provides several facilities
-to control the power resources, including power scripts. For now, the
-binding only supports the complete shutdown of the system after poweroff.
-
-Required properties:
-- compatible : must be one of the following
-	"ti,twl4030-power"
-	"ti,twl4030-power-reset"
-	"ti,twl4030-power-idle"
-	"ti,twl4030-power-idle-osc-off"
-
-The use of ti,twl4030-power-reset is recommended at least on
-3530 that needs a special configuration for warm reset to work.
-
-When using ti,twl4030-power-idle, the TI recommended configuration
-for idle modes is loaded to the tlw4030 PMIC.
-
-When using ti,twl4030-power-idle-osc-off, the TI recommended
-configuration is used with the external oscillator being shut
-down during off-idle. Note that this does not work on all boards
-depending on how the external oscillator is wired.
-
-Optional properties:
-
-- ti,system-power-controller: This indicates that TWL4030 is the
-  power supply master of the system. With this flag, the chip will
-  initiate an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
-  system poweroffs.
-
-- ti,use_poweroff: Deprecated name for ti,system-power-controller
-
-Example:
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_power: power {
-			compatible = "ti,twl4030-power";
-			ti,use_poweroff;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
deleted file mode 100644
index f2e2e28b317c..000000000000
--- a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-======================================================================
-Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver
-======================================================================
-
-The bridge is available on platforms with the VGA enabled on the Aspeed device.
-In this case, the host has access to a 64KiB window into all of the BMC's
-memory.  The BMC can disable this bridge.  If the bridge is enabled, the host
-has read access to all the regions of memory, however the host only has read
-and write access depending on a register controlled by the BMC.
-
-Required properties:
-===================
-
- - compatible: must be one of:
-	- "aspeed,ast2400-p2a-ctrl"
-	- "aspeed,ast2500-p2a-ctrl"
-
-Optional properties:
-===================
-
-- reg: A hint for the memory regions associated with the P2A controller
-- memory-region: A phandle to a reserved_memory region to be used for the PCI
-		to AHB mapping
-
-The p2a-control node should be the child of a syscon node with the required
-property:
-
-- compatible : Should be one of the following:
-		"aspeed,ast2400-scu", "syscon", "simple-mfd"
-		"aspeed,ast2500-scu", "syscon", "simple-mfd"
-
-Example
-===================
-
-g4 Example
-----------
-
-syscon: scu@1e6e2000 {
-	compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
-	reg = <0x1e6e2000 0x1a8>;
-
-	p2a: p2a-control {
-		compatible = "aspeed,ast2400-p2a-ctrl";
-		memory-region = <&reserved_memory>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
index f7bc84b05a87..8f5a468cfb91 100644
--- a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
@@ -14,7 +14,7 @@ description: |
   Google's ChromeOS EC PWM is a simple PWM attached to the Embedded Controller
   (EC) and controlled via a host-command interface.
   An EC PWM node should be only found as a sub-node of the EC node (see
-  Documentation/devicetree/bindings/mfd/google,cros-ec.yaml).
+  Documentation/devicetree/bindings/embedded-controller/google,cros-ec.yaml).
 
 allOf:
   - $ref: pwm.yaml#
diff --git a/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
index 981cfec53f37..19a9d2e15a96 100644
--- a/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: |
   This module is part of the sl28cpld multi-function device. For more
-  details see ../mfd/kontron,sl28cpld.yaml.
+  details see ../embedded-controller/kontron,sl28cpld.yaml.
 
   The controller supports one PWM channel and supports only four distinct
   frequencies (250Hz, 500Hz, 1kHz, 2kHz).
diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt
deleted file mode 100644
index d97ca1964e94..000000000000
--- a/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Texas Instruments TWL series PWM drivers
-
-Supported PWMs:
-On TWL4030 series: PWM1 and PWM2
-On TWL6030 series: PWM0 and PWM1
-
-Required properties:
-- compatible: "ti,twl4030-pwm" or "ti,twl6030-pwm"
-- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
-  the cells format.
-
-Example:
-
-twl_pwm: pwm {
-	compatible = "ti,twl6030-pwm";
-	#pwm-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt
deleted file mode 100644
index 31ca1b032ef0..000000000000
--- a/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Texas Instruments TWL series PWM drivers connected to LED terminals
-
-Supported PWMs:
-On TWL4030 series: PWMA and PWMB (connected to LEDA and LEDB terminals)
-On TWL6030 series: LED PWM (mainly used as charging indicator LED)
-
-Required properties:
-- compatible: "ti,twl4030-pwmled" or "ti,twl6030-pwmled"
-- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
-  the cells format.
-
-Example:
-
-twl_pwmled: pwmled {
-	compatible = "ti,twl6030-pwmled";
-	#pwm-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
index adc6b3f36fde..179c98b33b4d 100644
--- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
@@ -58,7 +58,7 @@ properties:
     maxItems: 1
 
   cros-ec-rpmsg:
-    $ref: /schemas/mfd/google,cros-ec.yaml
+    $ref: /schemas/embedded-controller/google,cros-ec.yaml
     description:
       This subnode represents the rpmsg device. The properties
       of this node are defined by the individual bindings for
@@ -126,7 +126,7 @@ patternProperties:
         maxItems: 1
 
       cros-ec-rpmsg:
-        $ref: /schemas/mfd/google,cros-ec.yaml
+        $ref: /schemas/embedded-controller/google,cros-ec.yaml
         description:
           This subnode represents the rpmsg device. The properties
           of this node are defined by the individual bindings for
diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
index 1434f4433738..dd51e8c5b8c2 100644
--- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
@@ -15,7 +15,7 @@ description: |
   Embedded Controller (EC) and is controlled via a host-command
   interface.  An EC codec node should only be found inside the "codecs"
   subnode of a cros-ec node.
-  (see Documentation/devicetree/bindings/mfd/google,cros-ec.yaml).
+  (see Documentation/devicetree/bindings/embedded-controller/google,cros-ec.yaml).
 
 allOf:
   - $ref: dai-common.yaml#
diff --git a/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
index 179272f74de5..0821ba0e84a3 100644
--- a/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
@@ -11,14 +11,19 @@ maintainers:
 
 description: |
   This module is part of the sl28cpld multi-function device. For more
-  details see ../mfd/kontron,sl28cpld.yaml.
+  details see ../embedded-controller/kontron,sl28cpld.yaml.
 
 allOf:
   - $ref: watchdog.yaml#
 
 properties:
   compatible:
-    const: kontron,sl28cpld-wdt
+    oneOf:
+      - items:
+          - enum:
+              - kontron,sa67mcu-wdt
+          - const: kontron,sl28cpld-wdt
+      - const: kontron,sl28cpld-wdt
 
   reg:
     maxItems: 1