Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
Please pull this batch of wireless updates intended for the 3.15
stream!

For the mac80211 bits, Johannes says:

"We have some cleanups and minor fixes as well as userspace API
improvements from a lot of people, extended VHT support for radiotap
from Emmanuel, CSA improvements from Andrei, Luca and Michal. I've also
included my work on hwsim to make dynamic registration of radios
possible."

Along with that, we get the usual round of updates to ath9k,
brcmfmac, mwifiex, wcn36xx, and the ti drivers -- nothing particularly
noteworthy, mostly just random updates and refactoring.

Also included is a pull of the wireless tree, intended to resolve
some potential merge issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 62 insertions, 37 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index b1f84b05c67e..9f90554e88c4 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1394,10 +1394,12 @@ struct cfg80211_scan_request {
 /**
  * struct cfg80211_match_set - sets of attributes to match
  *
- * @ssid: SSID to be matched
+ * @ssid: SSID to be matched; may be zero-length for no match (RSSI only)
+ * @rssi_thold: don't report scan results below this threshold (in s32 dBm)
  */
 struct cfg80211_match_set {
 	struct cfg80211_ssid ssid;
+	s32 rssi_thold;
 };
 
 /**
@@ -1420,7 +1422,8 @@ struct cfg80211_match_set {
  * @dev: the interface
  * @scan_start: start time of the scheduled scan
  * @channels: channels to scan
- * @rssi_thold: don't report scan results below this threshold (in s32 dBm)
+ * @min_rssi_thold: for drivers only supporting a single threshold, this
+ *	contains the minimum over all matchsets
  */
 struct cfg80211_sched_scan_request {
 	struct cfg80211_ssid *ssids;
@@ -1433,7 +1436,7 @@ struct cfg80211_sched_scan_request {
 	u32 flags;
 	struct cfg80211_match_set *match_sets;
 	int n_match_sets;
-	s32 rssi_thold;
+	s32 min_rssi_thold;
 
 	/* internal */
 	struct wiphy *wiphy;
@@ -1701,8 +1704,14 @@ struct cfg80211_ibss_params {
  *
  * @channel: The channel to use or %NULL if not specified (auto-select based
  *	on scan results)
+ * @channel_hint: The channel of the recommended BSS for initial connection or
+ *	%NULL if not specified
  * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan
  *	results)
+ * @bssid_hint: The recommended AP BSSID for initial connection to the BSS or
+ *	%NULL if not specified. Unlike the @bssid parameter, the driver is
+ *	allowed to ignore this @bssid_hint if it has knowledge of a better BSS
+ *	to use.
  * @ssid: SSID
  * @ssid_len: Length of ssid in octets
  * @auth_type: Authentication type (algorithm)
@@ -1725,11 +1734,13 @@ struct cfg80211_ibss_params {
  */
 struct cfg80211_connect_params {
 	struct ieee80211_channel *channel;
-	u8 *bssid;
-	u8 *ssid;
+	struct ieee80211_channel *channel_hint;
+	const u8 *bssid;
+	const u8 *bssid_hint;
+	const u8 *ssid;
 	size_t ssid_len;
 	enum nl80211_auth_type auth_type;
-	u8 *ie;
+	const u8 *ie;
 	size_t ie_len;
 	bool privacy;
 	enum nl80211_mfp mfp;
@@ -1768,6 +1779,7 @@ struct cfg80211_bitrate_mask {
 		u32 legacy;
 		u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN];
 		u16 vht_mcs[NL80211_VHT_NSS_MAX];
+		enum nl80211_txrate_gi gi;
 	} control[IEEE80211_NUM_BANDS];
 };
 /**
@@ -2875,6 +2887,11 @@ struct wiphy_vendor_command {
  * @n_vendor_commands: number of vendor commands
  * @vendor_events: array of vendor events supported by the hardware
  * @n_vendor_events: number of vendor events
+ *
+ * @max_ap_assoc_sta: maximum number of associated stations supported in AP mode
+ *	(including P2P GO) or 0 to indicate no such limit is advertised. The
+ *	driver is allowed to advertise a theoretical limit that it can reach in
+ *	some cases, but may not always reach.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -2990,6 +3007,8 @@ struct wiphy {
 	const struct nl80211_vendor_cmd_info *vendor_events;
 	int n_vendor_commands, n_vendor_events;
 
+	u16 max_ap_assoc_sta;
+
 	char priv[0] __aligned(NETDEV_ALIGN);
 };
 
@@ -3127,8 +3146,8 @@ struct cfg80211_cached_keys;
  * @identifier: (private) Identifier used in nl80211 to identify this
  *	wireless device if it has no netdev
  * @current_bss: (private) Used by the internal configuration code
- * @channel: (private) Used by the internal configuration code to track
- *	the user-set AP, monitor and WDS channel
+ * @chandef: (private) Used by the internal configuration code to track
+ *	the user-set channel definition.
  * @preset_chandef: (private) Used by the internal configuration code to
  *	track the channel to be used for AP later
  * @bssid: (private) Used by the internal configuration code
@@ -3192,9 +3211,7 @@ struct wireless_dev {
 
 	struct cfg80211_internal_bss *current_bss; /* associated / joined */
 	struct cfg80211_chan_def preset_chandef;
-
-	/* for AP and mesh channel tracking */
-	struct ieee80211_channel *channel;
+	struct cfg80211_chan_def chandef;
 
 	bool ibss_fixed;
 	bool ibss_dfs_possible;
@@ -3876,6 +3893,7 @@ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
  *
  * @dev: network device
  * @bssid: the BSSID of the IBSS joined
+ * @channel: the channel of the IBSS joined
  * @gfp: allocation flags
  *
  * This function notifies cfg80211 that the device joined an IBSS or
@@ -3885,7 +3903,8 @@ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr,
  * with the locally generated beacon -- this guarantees that there is
  * always a scan result for this IBSS. cfg80211 will handle the rest.
  */
-void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
+void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
+			  struct ieee80211_channel *channel, gfp_t gfp);
 
 /**
  * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index 8b5b71433297..b0fd9476c538 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -316,6 +316,10 @@ enum ieee80211_radiotap_type {
 #define IEEE80211_RADIOTAP_VHT_FLAG_LDPC_EXTRA_OFDM_SYM		0x10
 #define IEEE80211_RADIOTAP_VHT_FLAG_BEAMFORMED			0x20
 
+#define IEEE80211_RADIOTAP_CODING_LDPC_USER0			0x01
+#define IEEE80211_RADIOTAP_CODING_LDPC_USER1			0x02
+#define IEEE80211_RADIOTAP_CODING_LDPC_USER2			0x04
+#define IEEE80211_RADIOTAP_CODING_LDPC_USER3			0x08
 
 /* helpers */
 static inline int ieee80211_get_radiotap_len(unsigned char *data)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f4ab2fb4d50c..4f0f29dce0aa 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -808,9 +808,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
  * @RX_FLAG_VHT: VHT MCS was used and rate_index is MCS index
  * @RX_FLAG_40MHZ: HT40 (40 MHz) was used
- * @RX_FLAG_80MHZ: 80 MHz was used
- * @RX_FLAG_80P80MHZ: 80+80 MHz was used
- * @RX_FLAG_160MHZ: 160 MHz was used
  * @RX_FLAG_SHORT_GI: Short guard interval was used
  * @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present.
  *	Valid only for data frames (mainly A-MPDU)
@@ -830,6 +827,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	on this subframe
  * @RX_FLAG_AMPDU_DELIM_CRC_KNOWN: The delimiter CRC field is known (the CRC
  *	is stored in the @ampdu_delimiter_crc field)
+ * @RX_FLAG_LDPC: LDPC was used
  * @RX_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
  * @RX_FLAG_10MHZ: 10 MHz (half channel) was used
  * @RX_FLAG_5MHZ: 5 MHz (quarter channel) was used
@@ -866,9 +864,7 @@ enum mac80211_rx_flags {
 	RX_FLAG_AMPDU_DELIM_CRC_KNOWN	= BIT(20),
 	RX_FLAG_MACTIME_END		= BIT(21),
 	RX_FLAG_VHT			= BIT(22),
-	RX_FLAG_80MHZ			= BIT(23),
-	RX_FLAG_80P80MHZ		= BIT(24),
-	RX_FLAG_160MHZ			= BIT(25),
+	RX_FLAG_LDPC			= BIT(23),
 	RX_FLAG_STBC_MASK		= BIT(26) | BIT(27),
 	RX_FLAG_10MHZ			= BIT(28),
 	RX_FLAG_5MHZ			= BIT(29),
@@ -878,6 +874,21 @@ enum mac80211_rx_flags {
 #define RX_FLAG_STBC_SHIFT		26
 
 /**
+ * enum mac80211_rx_vht_flags - receive VHT flags
+ *
+ * These flags are used with the @vht_flag member of
+ *	&struct ieee80211_rx_status.
+ * @RX_VHT_FLAG_80MHZ: 80 MHz was used
+ * @RX_VHT_FLAG_80P80MHZ: 80+80 MHz was used
+ * @RX_VHT_FLAG_160MHZ: 160 MHz was used
+ */
+enum mac80211_rx_vht_flags {
+	RX_VHT_FLAG_80MHZ		= BIT(0),
+	RX_VHT_FLAG_80P80MHZ		= BIT(1),
+	RX_VHT_FLAG_160MHZ		= BIT(2),
+};
+
+/**
  * struct ieee80211_rx_status - receive status
  *
  * The low-level driver should provide this information (the subset
@@ -902,26 +913,19 @@ enum mac80211_rx_flags {
  *	HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT)
  * @vht_nss: number of streams (VHT only)
  * @flag: %RX_FLAG_*
+ * @vht_flag: %RX_VHT_FLAG_*
  * @rx_flags: internal RX flags for mac80211
  * @ampdu_reference: A-MPDU reference number, must be a different value for
  *	each A-MPDU but the same for each subframe within one A-MPDU
  * @ampdu_delimiter_crc: A-MPDU delimiter CRC
- * @vendor_radiotap_bitmap: radiotap vendor namespace presence bitmap
- * @vendor_radiotap_len: radiotap vendor namespace length
- * @vendor_radiotap_align: radiotap vendor namespace alignment. Note
- *	that the actual data must be at the start of the SKB data
- *	already.
- * @vendor_radiotap_oui: radiotap vendor namespace OUI
- * @vendor_radiotap_subns: radiotap vendor sub namespace
  */
 struct ieee80211_rx_status {
 	u64 mactime;
 	u32 device_timestamp;
 	u32 ampdu_reference;
 	u32 flag;
-	u32 vendor_radiotap_bitmap;
-	u16 vendor_radiotap_len;
 	u16 freq;
+	u8 vht_flag;
 	u8 rate_idx;
 	u8 vht_nss;
 	u8 rx_flags;
@@ -931,9 +935,6 @@ struct ieee80211_rx_status {
 	u8 chains;
 	s8 chain_signal[IEEE80211_MAX_CHAINS];
 	u8 ampdu_delimiter_crc;
-	u8 vendor_radiotap_align;
-	u8 vendor_radiotap_oui[3];
-	u8 vendor_radiotap_subns;
 };
 
 /**
@@ -2750,11 +2751,13 @@ enum ieee80211_roc_type {
  * @channel_switch_beacon: Starts a channel switch to a new channel.
  *	Beacons are modified to include CSA or ECSA IEs before calling this
  *	function. The corresponding count fields in these IEs must be
- *	decremented, and when they reach zero the driver must call
+ *	decremented, and when they reach 1 the driver must call
  *	ieee80211_csa_finish(). Drivers which use ieee80211_beacon_get()
  *	get the csa counter decremented by mac80211, but must check if it is
- *	zero using ieee80211_csa_is_complete() after the beacon has been
+ *	1 using ieee80211_csa_is_complete() after the beacon has been
  *	transmitted and then call ieee80211_csa_finish().
+ *	If the CSA count starts as zero or 1, this function will not be called,
+ *	since there won't be any time to beacon before the switch anyway.
  *
  * @join_ibss: Join an IBSS (on an IBSS interface); this is called after all
  *	information in bss_conf is set up and the beacon can be retrieved. A
@@ -3452,13 +3455,13 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  *
  * After a channel switch announcement was scheduled and the counter in this
- * announcement hit zero, this function must be called by the driver to
+ * announcement hits 1, this function must be called by the driver to
  * notify mac80211 that the channel can be changed.
  */
 void ieee80211_csa_finish(struct ieee80211_vif *vif);
 
 /**
- * ieee80211_csa_is_complete - find out if counters reached zero
+ * ieee80211_csa_is_complete - find out if counters reached 1
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  *
  * This function returns whether the channel switch counters reached zero.
@@ -4451,7 +4454,6 @@ struct ieee80211_tx_rate_control {
 };
 
 struct rate_control_ops {
-	struct module *module;
 	const char *name;
 	void *(*alloc)(struct ieee80211_hw *hw, struct dentry *debugfsdir);
 	void (*free)(void *priv);
@@ -4553,8 +4555,8 @@ int rate_control_set_rates(struct ieee80211_hw *hw,
 			   struct ieee80211_sta *pubsta,
 			   struct ieee80211_sta_rates *rates);
 
-int ieee80211_rate_control_register(struct rate_control_ops *ops);
-void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
+int ieee80211_rate_control_register(const struct rate_control_ops *ops);
+void ieee80211_rate_control_unregister(const struct rate_control_ops *ops);
 
 static inline bool
 conf_is_ht20(struct ieee80211_conf *conf)