diff options
| -rw-r--r-- | arch/arm64/boot/dts/qcom/lemans-evk.dts | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts index c8c54ad01223..0b01be78a737 100644 --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts @@ -69,6 +69,37 @@ }; }; + connector-1 { + compatible = "usb-c-connector"; + label = "USB1-Type-C"; + data-role = "host"; + power-role = "source"; + + vbus-supply = <&usb1_vbus>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb1_con_hs_ep: endpoint { + remote-endpoint = <&usb_hub_2_1>; + }; + }; + + port@1 { + reg = <1>; + + usb1_con_ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_1_in_ep>; + }; + + }; + }; + }; + connector-2 { compatible = "gpio-usb-b-connector", "usb-b-connector"; label = "micro-USB"; @@ -161,6 +192,15 @@ enable-active-high; }; + usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + gpio = <&expander1 3 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + usb2_vbus: regulator-usb2-vbus { compatible = "regulator-fixed"; regulator-name = "usb2_vbus"; @@ -565,6 +605,39 @@ }; }; }; + + usb-typec@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + + interrupts-extended = <&pmm8654au_2_gpios 6 IRQ_TYPE_EDGE_FALLING>; + + id-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&usb1_id>, <&usb1_intr>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hd3ss3220_1_in_ep: endpoint { + remote-endpoint = <&usb1_con_ss_ep>; + }; + }; + + port@1 { + reg = <1>; + + hd3ss3220_1_out_ep: endpoint { + remote-endpoint = <&usb_hub_3_1>; + }; + }; + }; + }; }; &i2c18 { @@ -756,6 +829,14 @@ power-source = <0>; }; + usb1_intr: usb1-intr-state { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; + usb2_id: usb2-id-state { pins = "gpio11"; function = "normal"; @@ -956,6 +1037,12 @@ function = "gpio"; bias-pull-up; }; + + usb1_id: usb1-id-state { + pins = "gpio51"; + function = "gpio"; + bias-pull-up; + }; }; &uart0 { @@ -1014,6 +1101,87 @@ status = "okay"; }; +&usb_1 { + dr_mode = "host"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + usb_hub_2_x: hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + + peer-hub = <&usb_hub_3_x>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + usb_hub_2_1: endpoint { + remote-endpoint = <&usb1_con_hs_ep>; + }; + }; + + /* + * Port-4 is connected to M.2 E key connector on corekit. + */ + port@4 { + reg = <4>; + + usb_hub_2_4: endpoint { + }; + }; + }; + }; + + usb_hub_3_x: hub@2 { + compatible = "usb5e3,625"; + reg = <2>; + + peer-hub = <&usb_hub_2_x>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + usb_hub_3_1: endpoint { + remote-endpoint = <&hd3ss3220_1_out_ep>; + }; + }; + + port@4 { + reg = <4>; + + usb_hub_3_4: endpoint { + }; + }; + }; + }; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + &usb_2 { status = "okay"; }; |