diff options
Diffstat (limited to 'arch/arm')
7 files changed, 161 insertions, 7 deletions
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile index f71392a55df8..75b2b6a2f7a6 100644 --- a/arch/arm/boot/dts/allwinner/Makefile +++ b/arch/arm/boot/dts/allwinner/Makefile @@ -182,6 +182,9 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-wits-pro-a20-dkt.dtb # Enables support for device-tree overlays for all pis +DTC_FLAGS_sun8i-h2-plus-bananapi-m2-zero := -@ +DTC_FLAGS_sun8i-h2-plus-libretech-all-h3-cc := -@ +DTC_FLAGS_sun8i-h2-plus-orangepi-r1 := -@ DTC_FLAGS_sun8i-h2-plus-orangepi-zero := -@ DTC_FLAGS_sun8i-h3-orangepi-lite := -@ DTC_FLAGS_sun8i-h3-bananapi-m2-plus := -@ @@ -201,6 +204,7 @@ DTC_FLAGS_sun8i-h3-orangepi-pc := -@ DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@ DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@ DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@ +DTC_FLAGS_sun8i-t113s-netcube-dobermann := -@ DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-evb.dtb \ @@ -261,6 +265,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ sun8i-t113s-mangopi-mq-r-t113.dtb \ + sun8i-t113s-netcube-dobermann.dtb \ sun8i-t113s-netcube-nagami-basic-carrier.dtb \ sun8i-t113s-netcube-nagami-keypad-carrier.dtb \ sun8i-t3-cqa3t-bv3.dtb \ diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts index ea7a59dcf8f9..f6d4babe6c1c 100644 --- a/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts @@ -179,7 +179,7 @@ }; -&uart0 { +&uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; status = "okay"; diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts index 60e432a0ef1c..408d1f01412f 100644 --- a/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts @@ -78,7 +78,7 @@ cpu-supply = <®_dcdc2>; }; -&ehci0 { +&ehci0 { status = "okay"; }; @@ -157,7 +157,7 @@ status = "okay"; }; -&ohci0 { +&ohci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi index 51a6464aab9a..cabf619c2e21 100644 --- a/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi @@ -185,7 +185,7 @@ pmu { compatible = "arm,cortex-a8-pmu"; - interrupts = <3>; + interrupts = <66>; }; reserved-memory { diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts index 2b0566d4b386..88550da5af62 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts +++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts @@ -73,7 +73,7 @@ enable-active-high; gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ vin-supply = <®_vcc5v0>; - }; + }; reg_vdd_sys: vdd-sys { compatible = "regulator-fixed"; @@ -85,7 +85,7 @@ enable-active-high; gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ vin-supply = <®_vcc5v0>; - }; + }; wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts new file mode 100644 index 000000000000..d7765caffe2a --- /dev/null +++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2026 Lukas Schmid <lukas.schmid@netcube.li> + */ + +/dts-v1/; +#include "sun8i-t113s-netcube-nagami.dtsi" + +#include <dt-bindings/leds/common.h> + +/ { + model = "NetCube Systems OpenNMC (dobermann)"; + compatible = "netcube,dobermann", "netcube,nagami", + "allwinner,sun8i-t113s"; + + aliases { + serial2 = &uart4; // UART on SmartSlot + rtc0 = &ds3232; + rtc1 = &rtc; // not battery backed + }; + + leds { + compatible = "gpio-leds"; + + led_heartbeat_green: led-heartbeat-green { + gpios = <&pio 6 14 GPIO_ACTIVE_HIGH>; /* PG14 */ + linux,default-trigger = "heartbeat"; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + tusb320: typec@60 { + compatible = "ti,tusb320"; + reg = <0x60>; + interrupts-extended = <&pio 3 22 IRQ_TYPE_LEVEL_LOW>; /* PD22 */ + }; + + ds3232: rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; +}; + +/* microSD Card Slot on the board */ +&mmc0 { + vmmc-supply = <®_vcc3v3>; + disable-wp; + bus-width = <4>; + cd-gpios = <&pio 6 15 GPIO_ACTIVE_LOW>; /* PG15 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + gpio-line-names = "", "", "", "", // PA + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "SMART_TX", "SMART_RX", // PB + "EXT_IO3", "EXT_IO2", "CONSOLE_TX", "CONSOLE_RX", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "eMMC_CLK", "eMMC_CMD", // PC + "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", // PD + "", "", "", "", + "", "USB_SEC_EN", "EXT_SPI_nCS", "EXT_SPI_SCK", + "EXT_SPI_MOSI", "EXT_SPI_MISO", "EXT_IO5", "EXT_IO4", + "SMART_SEL", "", "", "", + "I2C2_SCL", "I2C2_SDA", "TUSB320_nINT", "", + "", "", "", "", + "", "", "", "", + "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE + "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "", + "ETH_MDC", "ETH_MDIO", "I2C3_nINT", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "uSD_D1", "uSD_D0", "uSD_CLK", "uSD_CMD", // PF + "uSD_D3", "uSD_D2", "TUSB320_ID", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG + "ESP_D2", "ESP_D3", "ESP_TXD", "ESP_RXD", + "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA", + "EXT_IO1", "EXT_IO0", "LED_HEARTBEAT", "SD_DETECT", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +/* SmartSlot serial */ +&uart4 { + pinctrl-0 = <&uart4_pb_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + extcon = <&tusb320 0>; + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi index 544d60cfc32e..4879a437f415 100644 --- a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi +++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi @@ -42,7 +42,7 @@ }; /* USB0 MUX to switch connect to Card-Edge only after BootROM */ - usb0_sec_mux: mux-controller{ + usb0_sec_mux: mux-controller { compatible = "gpio-mux"; #mux-control-cells = <0>; mux-gpios = <&pio 3 9 GPIO_ACTIVE_HIGH>; /* PD9 */ |