| Age | Commit message (Collapse) | Author |
|---|
|
The nointxmask and disable_idle_d3 module parameters remain writable,
but vfio-pci now latches their values into each device at init. Once a
device is registered, changing the module parameter only affects future
devices, leaving no direct way to confirm the effective policy for an
existing device.
Add a pci debugfs directory under the VFIO device debugfs root and
report the per-device nointxmask and disable_idle_d3 values. These are
read-only debugfs views and use the same Y/N bool output convention as
the module parameters.
Read-only vfio-pci parameters, such as disable_vga, are not exposed here
because they cannot drift from the latched device value, therefore the
existing module parameter exposure via sysfs is sufficient.
Note that while only vfio-pci currently provides these options, the
implementation is in vfio-pci-core and therefore properly reflects the
device policy in the core, regardless of driver.
Assisted-by: OpenAI Codex:gpt-5
Cc: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-7-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"The changes primarily focus on filesystem error reporting, reducing
memory footprint by reverting in-memory data structures used for
runtime validation, honoring FDP hints, and adding trace and debug
logs. In addition, there are critical bug fixes resolving
out-of-bounds read vulnerabilities in inline directory and ACL
handling, potential deadlocks in balance_fs, use-after-free issues in
atomic writes, and false data/node type assignments in large sections.
Enhancements:
- Revert in-memory sit version and block bitmaps
- support to report fserror
- add trace_f2fs_fault_report
- add iostat latency tracking for direct IO
- add logs in f2fs_disable_checkpoint()
- honor per-I/O write streams for direct writes
- map data writes to FDP streams
- skip inode folio lookup for cached overwrite
- skip direct I/O iostat context when disabled
- revert "check in-memory block bitmap"
- revert "check in-memory sit version bitmap"
Fixes:
- optimize representative type determination in GC
- fix incorrect FI_NO_EXTENT handling in __destroy_extent_node()
- fix potential deadlock in f2fs_balance_fs()
- fix potential deadlock in gc_merge path of f2fs_balance_fs()
- atomic: fix UAF issue on f2fs_inode_info.atomic_inode
- fix missing read bio submission on large folio error
- pass correct iostat type for single node writes
- fix to do sanity check on f2fs_get_node_folio_ra()
- validate orphan inode entry count
- keep atomic write retry from zeroing original data
- read COW data with the original inode during atomic write
- validate inline dentry name lengths before conversion
- validate dentry name length before lookup compares it
- reject setattr size changes on large folio files
- revert "remove non-uptodate folio from the page cache in move_data_block"
- validate ACL entry sizes in f2fs_acl_from_disk()
- bound i_inline_xattr_size for non-inline-xattr inodes
- fix listxattr handling of corrupted xattr entries
- fix to round down start offset of fallocate for pin file"
* tag 'f2fs-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits)
f2fs: fix to round down start offset of fallocate for pin file
f2fs: fix listxattr handling of corrupted xattr entries
f2fs: skip direct I/O iostat context when disabled
f2fs: remove unneeded f2fs_is_compressed_page()
f2fs: avoid unnecessary fscrypt_finalize_bounce_page()
f2fs: avoid unnecessary sanity check on ckpt_valid_blocks
f2fs: misc cleanup in f2fs_record_stop_reason()
f2fs: fix wrong description in printed log
f2fs: bound i_inline_xattr_size for non-inline-xattr inodes
f2fs: validate ACL entry sizes in f2fs_acl_from_disk()
Revert "f2fs: remove non-uptodate folio from the page cache in move_data_block"
f2fs: Split f2fs_write_end_io()
f2fs: Rename f2fs_post_read_wq into f2fs_wq
f2fs: Prepare for supporting delayed bio completion
f2fs: reject setattr size changes on large folio files
f2fs: validate dentry name length before lookup compares it
f2fs: validate inline dentry name lengths before conversion
f2fs: read COW data with the original inode during atomic write
f2fs: skip inode folio lookup for cached overwrite
f2fs: keep atomic write retry from zeroing original data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (115 commits)
platform/x86/intel/pmc: Add NVL PCI IDs for SSRAM telemetry discovery
platform/x86/intel/pmc/ssram: Make PMT registration optional
platform/x86/intel/pmc/ssram: Add ACPI discovery scaffolding
platform/x86/intel/pmc/ssram: Switch to static array with per-index probe state
platform/x86/intel/pmc/ssram: Refactor DEVID/PWRMBASE extraction into helper
platform/x86/intel/pmc/ssram: Add PCI platform data
platform/x86/intel/pmc/ssram: Rename probe and PCI ID table for consistency
platform/x86/intel/pmc: Add ACPI PWRM telemetry driver for Nova Lake S
platform/x86/intel/pmc: Add PMC SSRAM Kconfig description
platform/x86/intel/pmt: Unify header fetch and add ACPI source
platform/x86/intel/pmt: Cache the telemetry discovery header
platform/x86/intel/pmt: Pass discovery index instead of resource
platform/x86/intel/pmt/telemetry: Move overlap check to post-decode hook
platform/x86/intel/pmt/crashlog: Split init into pre-decode
platform/x86/intel/pmt: Add pre/post decode hooks around header parsing
modpost: Handle malformed WMI GUID strings
platform/wmi: Make sysfs attributes const
platform/wmi: Make wmi_bus_class const
hwmon: (dell-smm) Use new buffer-based WMI API
platform/x86: dell-ddv: Use new buffer-based WMI API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver updates from Greg KH:
"Here is the big set of char, misc, iio, fpga, and other small driver
subsystems changes for 7.2-rc1.
Lots of little stuff in here, the majority being of course the IIO
driver updates, as a list they are:
- IIO driver updates and additions
- GPIB driver bugfixes and cleanups
- Android binder driver updates (rust and C version)
- counter driver updates
- MHI driver updates
- mei driver updates
- w1 driver updates
- interconnect driver updates
- Comedi driver fixes and updates
- some obsolete char drivers removed (applicom and dtlk)
- hwtracing driver updates
- other tiny driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
w1: ds2482: Use named initializers for arrays of i2c_device_data
firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
iio: chemical: scd30: Replace manual locking with RAII locking
iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
iio: dac: ad5686: create bus ops struct
iio: dac: ad5686: cleanup doc header of local structs
iio: dac: ad5686: add control_sync() for single-channel devices
iio: dac: ad5686: add helpers to handle powerdown masks
iio: dac: ad5686: add of_match table to the spi driver
iio: dac: ad5686: drop enum id
iio: dac: ad5686: remove redundant register definition
iio: dac: ad5686: refactor include headers
iio: adc: ad4080: fix AD4880 chip ID
iio: light: veml3328: add support for new device
dt-bindings: iio: light: veml6030: add veml3328
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"
* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply drivers:
- New EC driver providing battery info for Microsoft Surface RT
- New driver for battery charger in Samsung S2M PMICs
- Rework max17042 driver
- sysfs control for bd71828 auto input current limitation
All over:
- Use named fields for struct platform_device_id and of_device_id
entries
- Misc small cleanups and fixes"
* tag 'for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits)
Documentation: ABI: sysfs-class-reboot-mode-reboot_modes: fix doc warnings
power: supply: charger-manager: fix refcount leak in is_full_charged()
power: supply: core: fix supplied_from allocations
power: supply: max17042_battery: Use modern PM ops to clear up warning
power: supply: add support for Samsung S2M series PMIC charger device
power: supply: Add support for Surface RT battery and charger
dt-bindings: embedded-controller: Document Surface RT EC
power: supply: bd71828: sysfs for auto input current limitation
power: supply: cpcap-charger: include missing <linux/property.h>
power: supply: cros_charge-control: Move MODULE_DEVICE_TABLE next to the table itself
power: supply: ab8500_fg: Fix typos in comments
power: supply: Use named initializers for arrays of i2c_device_data
power: supply: Remove unused jz4740-battery.h
power: reset: st-poweroff: Use of_device_get_match_data()
power: supply: bq257xx: Add fields for 'charging' and 'overvoltage' states
power: supply: bq257xx: Consistently use indirect get/set helpers
power: supply: bq257xx: Make the default current limit a per-chip attribute
power: supply: bq257xx: Fix VSYSMIN clamping logic
power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak
power: supply: max17042: fix OF node reference imbalance
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Samsung S2MU005: Add support for the Samsung S2MU005 PMIC which
includes flash and RGB LED controllers
- Texas Instruments:
- LP5812: Add support for the TI LP5812 LED driver
- LP5860: Add support for the Texas Instruments LP5860 LED matrix
driver via SPI
Improvements & Fixes:
- Core:
- Adjust the brightness sysfs node documentation to clarify that
only decimal values are accepted
- Fix a race condition in the software blink logic when stopping
blinking and setting brightness simultaneously
- Introduce the `multi_max_intensity` sysfs attribute for
multicolor LEDs to support hardware-based global brightness
control
- Replace OF-based device lookup with firmware node equivalents
to support ACPI and software nodes
- Return `ENODATA` when reading brightness from
hardware-controlled LEDs
- Set the coherent DMA mask to zero for the Samsung PMIC device
to suppress unnecessary "DMA mask not set" messages
- ams OSRAM AS3668: Fix a Kconfig symbol name mismatch in the
Makefile that prevented the driver from being built
- BlinkM: Fix spelling and comment style issues in the driver
- DAC124S085: Declare the SPI command word as `__le16` to ensure
correct endianness and pass sparse checks
- GPIO Trigger: Use `GPIOD_FLAGS_BIT_NONEXCLUSIVE` to allow sharing
GPIOs between the LED trigger and other drivers
- NXP PCA9532: Fix an issue where the LED would stop blinking when
changing brightness to a non-zero value
- Qualcomm: Unify the user-visible company name to "Qualcomm" across
flash LED config options
- Qualcomm LPG: Optimize memory allocation by combining main
structure and channels into a single allocation using flexible
array members
- Texas Instruments
- LP5860: Add missing `CONFIG_OF` dependency to prevent build
warnings
- TPS6131x: Increase the overvoltage protection threshold to 6V
to avoid false triggers with 5V input supplies
- Userspace LEDs (uLEDs):
- Fix a potential buffer overread by using `strnchr()` for name
string validation
- Return `-EFAULT` on `copy_to_user()` failure to properly handle
read errors
Cleanups & Refactoring:
- Core:
- Convert various `i2c_device_id` arrays to use named
initializers for improved robustness and readability
- Multi-color: Fix incorrect `KernelVersion` and `Date` tags for
the `multi_max_intensity` ABI
- Broadcom BCM63138 / ChromeOS EC: Move `MODULE_DEVICE_TABLE`
declarations next to the ID tables for consistency
- LP5812: Fix a sysfs ABI reference in the documentation
- ST1202: Remove an unused legacy GPIO header include
Device Tree Binding Updates:
- Class: Document the keyboard backlight LED class naming
conventions, including a new scheme for zoned backlights
- Core: Dual-license the common LED bindings header under GPLv2
and BSD-2-Clause
- IR SPI LED: Add a new 30% duty-cycle value for the IR transmitter
used in Xiaomi Redmi Note 8
- Samsung S2M series:
- Document the flash LED device bindings for Samsung S2M series
PMICs
- Document the pattern behavior for Samsung S2M series PMIC RGB
- S2MU005: Add device tree bindings for the S2MU005 PMIC,
including its flash and RGB LED sub-devices
- TI LM3560: Document the TI LM3559 and LM3560 synchronous boost
flash drivers"
* tag 'leds-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
leds: tps6131x: Increase overvoltage protection threshold to 6V
leds: Fix sysfs ABI date
leds: Fix CONFIG_OF dependency for LEDS_LP5860_CORE
leds: uleds: Fix potential buffer overread
leds: Use named initializers for arrays of i2c_device_data
leds: uleds: Return -EFAULT on copy_to_user() failure
leds: core: Report ENODATA for brightness of hardware controlled LED
leds: class: Use firmware nodes for device lookup
Documentation: leds: Document pattern behavior of Samsung S2M series PMIC RGB LEDs
leds: rgb: Add support for Samsung S2M series PMIC RGB LED device
leds: flash: Add support for Samsung S2M series PMIC flash LED device
dt-bindings: leds: Document Samsung S2M series PMIC flash LED device
leds: core: Fix race condition for software blink
leds: Adjust documentation of brightness sysfs node
leds: dac124s085: Declare SPI command word as __le16
leds: Introduce the multi_max_intensity sysfs attribute
dt-bindings: leds: Document TI LM3560 Synchronous Boost Flash Driver
leds: bcm63138/cros_ec: Move MODULE_DEVICE_TABLE next to the table itself
leds: Add support for TI LP5860 LED driver chip
Documentation: leds: leds-class: Document keyboard backlight LED class naming
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
|
|
The "multi_max_intensity" sysfs attribute was not included
in kernel 7.1, so update the KernelVersion and Date tags
accordingly.
Fixes: b1a9b7a904af ("leds: Introduce the multi_max_intensity sysfs attribute")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260527001422.51111-1-W_Armin@gmx.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Adjust documentation of brightness sysfs node about accepted value range.
The code accepts only decimal values. We may not relax that due to different
readings for, e.g., octal 0100, which becomes 64 instead of currently parsed
100.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513220620.369825-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Some multicolor LEDs support global brightness control in hardware,
meaning that the maximum intensity of the color components is not
connected to the maximum global brightness. Such LEDs cannot be
described properly by the current multicolor LED class interface,
because it assumes that the maximum intensity of each color component
is described by the maximum global brightness of the LED.
Fix this by introducing a new sysfs attribute called
"multi_max_intensity" holding the maximum intensity values for the
color components of a multicolor LED class device. Drivers can use
the new max_intensity field inside struct mc_subled to tell the
multicolor LED class code about those values. Intensity values written
by userspace applications will be limited to this maximum value.
Drivers for multicolor LEDs that do not support global brightness
control in hardware might still want to use the maximum global LED
brightness supplied via devicetree as the maximum intensity of each
individual color component. Such drivers should set max_intensity
to 0 so that the multicolor LED core can act accordingly.
The lp50xx and ncp5623 LED drivers already use hardware-based control
for the global LED brightness. Modify those drivers to correctly
initalize .max_intensity to avoid being limited to the maximum global
brightness supplied via devicetree.
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260509214603.262368-2-W_Armin@gmx.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- xe: add initial CRI platform support
- amdgpu: initial HDMI 2.1 FRL support
- rust: add some new type concepts for device lifetimes
- scheduler: moves to a fair algorithm and lots of cleanups
But it's mostly the usual mountain of changes across the board.
core:
- add docbook for DRM_IOCTL_SYNCOBJ_EVENTFD
- change signature of drm_connector_attach_hdr_output_metadata_property
- dedup counter and timestamp retrieval in vblank code
- parse AMD VSDB v3 in CTA extension blocks
- add P230, Y7, XYYY2101010, T430, XVUY210101010 formats
- don't call drop master on file close if not master
- use drm_printf_indent in atomic / bridge
- fix 32b format descriptions
- docs: fix toctree
- hdmi: add common TMDS character rates
- fix drm_syncobj_find_fence leak
rust:
- introduce Higher-Ranked lifetime types
- replace drvdata with scoped registration data
- add GPUVM immediate mode abstraction for rust GPU drivers
- introduce DeviceContext type state for drm::Device
bridge:
- clarify drm_bridge_get/put
- create drm_get_bridge_by_endpoint and use it
- analogix_dp: add panel probing
- ite-it6211 - use drm audio hdmi helpers
buddy:
- add lockdep annotations
dp:
- add PR and VRR updates
- mst: fix buffer overflows
- add Adaptive Sync SDP decoding support
- fix OOB reads in dp-mst
ttm:
- bump fpfn/lpfn to 64-bit
scheduler:
- change default to fair scheduler
- map runqueue 1:1 with scheduler
dma-buf:
- port selftests to kunit
- convert dma-buf system/heap allocators to module
- add separate DMABUF_HEAPS_SYSTEM_CC_SHARED Kconfig
udmabuf:
- revert hugetlb support
- fix error with CONFIG_DMA_API_DEBUG
dma-fence:
- fix tracepoints lifetime
- remove unused signal on any support
ras:
- add clear error counter netlink command to drm ras
gpusvm:
- reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- use IOVA allocations
pagemap:
- use IOVA allocations
panels:
- update to use ref counts
- add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1
- add support for waveshare panels
- CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5,
- IVO, R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F,
- AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels
- Surface Pro 12 Panel
xe:
- add CRI PCI-IDs
- debugfs add multi-lrc info
- engine init cleanup
- PF fair scheduling auto provisioning
- system controller support for CRI/Xe3p
- PXP state machine fixes
- Reset/wedge/unload corner case fixes
- Wedge path memory allocation fixes
- PAT type cleanups
- Reject unsafe PAT for CPU cached memory
- OA improvements for CRI device memory
- kernel doc syntax in xe headers
- xe_drm.h documentation fixes
- include guard cleanups
- VF CCS memory pool
- i915/xe step unification
- Xe3p GT tuning fixes
- forcewake cleanup in GT and GuC
- admin-only PF mode
- enable hwmon energy attributes for CRI
- enable GT_MI_USER_INTERRUPT
- refactor emit functions
- oa workarounds
- multi_queue: allow QUEUE_TIMESTAMP register
- convert stolen memory to ttm range manager
- use xe2 style blitter as a feature flag
- make drm_driver const
- add/use IRQ page to HW engine definition
- fix oops when display disabled
i915:
- enable PIPEDMC_ERROR interrupt
- more common display code refactoring
- restructure DP/HDMI sink format handling
- eliminate FB usage from lowlevel pinning code
- panel replay bw optimization
- integrate sharpness filter into the scaler
- new fb_pin abstraction for xe/i915 fb transparent handling
- skip inactive MST connectors on HDCP
- start switching to display specific registers
- use polling when irq unavailable
- Adaptive-sync SDP prep
amdgpu:
- use drm_display_info for AMD VSDB data
- Initial HDMI 2.1 FRL support
- Initial DCN 4.2.1 support
- GART fixes for non-4k pages
- GC 11.5.6/SDMA 6.4.0/and other new IPs
- GFX9/DCE6/Hawaii/SDMA4/GART/Userq fixes
- Finish support for using multiple SDMA queues for TTM operations
- SWSMU updates
- GC 12.1 updates
- SMU 15.0.8 updates
- DCN 4.2 updates
- DC type conversion fixes
- Enable DC power module
- Replay/PSR updates
- SMU 13.x updates
- Compute queue quantum MQD updates
- ASPM fix
- Align VKMS with common implementation
- DC analog support fixes
- UVD 3 fixes
- TCC harvesting fixes for SI
- GC 11 APU module reload fix
- NBIO 6.3.2 support
- IH 7.1 updates
- DC cursor fixes
- VCN/JPEG user fence fixes
- DC support for connectors without DDC
- Prefer ROM BAR for default VGA device
- DC bandwidth fixes
- Add PTL support for profiler
- Introduce dc_plane_cm and migrate surface update color path
- Add FRL registers for HDMI 2.1
- Restructure VM state machine
- Auxless ALPM support
- GEM_OP locking/warning fixes
- switch to system_dfl_wq
amdkfd:
- GPUVM TLB flush fix
- Hotplug fix
- Boundary check fixes
- SVM fixes
- CRIU fixes
- add profiler API
- MES 12.1 updates
msm:
- core:
- fix shrinker documentation
- IFPC enabled for gen8
- PERFCNTR_CONFIG ioctl support
- GPU:
- reworked UBWC handling
- a810 support
- MDSS:
- add support for Milos platform
- reworked UBWC handling
- DisplayPort:
- reworked HPD handling as prep for MST
- DPU:
- Milos platform support
- reworked UBWC handling
- DSI:
- Milos platform support
nova:
- Hopper/Blackwell enablement (GH100/GB100/GB202)
- FSP support
- 32-bit firmware support
- HAL functions
- refactor GSP boot/unload
- GA100 support
- VBIOS hardening/refactoring
- Adopt higher order lifetime types
tyr:
- define register blocks
- add shmem backed GEM objects
- adopt higher order lifetime types
- move clock cleanup into Drop
radeon:
- Hawaii SMU fixes
- CS parser fix
- use struct drm_edid instead of edid
amdxdna:
- export per-client BO memory via fdinfo
- AIE4 device support
- support medium/lower power modes
- expandable device heap support
- revert read-only user-pointer BO mappings
ivpu:
- support frequency limiting
panthor:
- enable GEM shrinker support
- add eviction and reclaim info to fdinfo
v3d:
- enable runtime PM
mgag200:
- support XRGB1555 + C8
ast:
- support XRGB1555 + C8
- use constants for lots of registers
- fix register handling
imagination:
- fence handling refactoring
nouveau:
- fix sched double call
- expose VBIOS on GSP-RM systems
- add GA100 support
virtio:
- add VIRTIO_GPU_F_BLOB_ALIGNMENT flag
- add deferred mapping support
gud:
- add RCade Display Adapter
hibmc:
- fix no connectors usage
mediatek:
- hdmi: convert error handling
- simplify mtk_crtc allocation
exynos:
- move fbdev emulation to drm client buffers
- use drm format helpers for geometry/size
- adopt core DMA tracking
- fix framebuffer offset handling
renesas:
- add RZ/T2H SOC support
versilicon:
- add cursor plane support
tegra:
- use drm client for framebuffer"
* tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel: (1731 commits)
dma-buf: move system_cc_shared heap under separate Kconfig
accel/amdxdna: Clear sva pointer after unbind
agp/amd64: Fix broken error propagation in agp_amd64_probe()
accel/amdxdna: Require carveout when PASID and force_iova are disabled
drm/amdkfd: always resume_all after suspend_all
drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini
drm/amd/display: Consult MCCS FreeSync cap only if requested & supported
drm/amd/pm: Use strscpy in profile mode parsing
drm/amdkfd: Fix infinite loop parsing CRAT with zero subtype length
drm/amdkfd: fix sysfs topology prop length on buffer truncation
drm/amdgpu: drop retry loop in amdgpu_hmm_range_get_pages
drm/amd/pm: bound OD parameter parsing to stack array size
drm/amd/pm: Stop pp_od_clk_voltage emit at PAGE_SIZE
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
drm/amdgpu: validate the mes firmware version for gfx12.1
drm/amdgpu: validate the mes firmware version for gfx12
drm/amdgpu: compare MES firmware version ucode for gfx11
drm/amdkfd: Add bounds check for AMDKFD_IOC_WAIT_EVENTS
drm/amdgpu: restart the CS if some parts of the VM are still invalidated
drm/amd/display: use unsigned types for local pipe and REG_GET counters
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers for the following chips:
- Analog Devices LTC4283 Swap Controller
- Analog Devices MAX20830
- Analog Devices MAX20860A
- ARCTIC Fan Controller
- Delta E50SN12051
- Luxshare LX1308
- Microchip EMC1812/13/14/15/33
- Monolithic MP2985
- Murata D1U74T PSU
New chip support added to existing drivers:
- asus-ec-sensors: Support for ROG MAXIMUS Z790 EXTREME, ROG STRIX
B850-E GAMING WIFI, and ROG STRIX B650E-E GAMING WIFI
- dell-smm: Add Dell Latitude 7530 to fan control whitelist
- nct6683: Support for ASRock Z890 Pro-A
- pmbus: Support for Flex BMR316, BMR321, BMR350 and BMR351
- pmbus/max34440: Support for ADPM12250
- pmbus/xdp720: Support for Infineon xdp730, and fix driver issues
reported by Sashiko
New functionality:
- Add support for update_interval_us chip attribute, and support it
in ina238 driver
- Add support for guard() and scoped_guard() for subsystem locks, and
use it in adt7411, ina2xx, and lm90 drivers
- emc2305: Support configurable fan PWM at shutdown
- lm63: Expose PWM frequency and LUT hysteresis as writable
- lm75: Support active-high alert polarity
- nct7802: Add time step attributes for tweaking responsiveness
- pmbus/adm1266: Add rtc debugfs entries for rtc, powerup_counter,
clear_blackbox, and firmware_revision
- raspberrypi: Fix delayed-work teardown race, add voltage input
support as well as voltage domain IDs
- mcp9982: Add support for reporting external diode faults
Miscellaneous bug fixes, changes and improvements:
- Use named initializers for platform_device_id arrays and
i2c_device_data, and remove unused driver data
- Various drivers: Move MODULE_DEVICE_TABLE next to the table itself
- ads7871: Convert to hwmon_device_register_with_info(), and use
DMA-safe buffer for SPI writes
- adt7411: document supported sysfs attributes
- adt7462: Add of_match_table to support devicetree
- adt7475: Add explicit header include
- coretemp; Fix outdated documentation, coding style issues, and
replace hardcoded core count with dynamic value
- cros_ec: Drop unused assignment of platform_device_id driver data
- emc2305: Fix fan channel index handling
- gpd-fan: Reject EC PWM value 0 as invalid, fix race condition
between device removal and sysfs access, upgrade log level from
warn to err for platform device creation failure, initialize EC
before registering hwmon device, drop global driver data and use
per-device allocation
- htu31: document debugfs serial_number
- ina238: Add support for samples and update_interval
- it87: Clamp negative values to zero in set_fan()
- lm75: Add explicit header include, Add explicit default cases in
lm75_is_visible(), and add section for sysfs interface to
documentation
- pmbus/lm25066: Fix PMBus coefficients for LM5064/5066/5066i
- tmp102: Use device_property_read_string API
- tmp401: Read "ti,n-factor" as signed
- Convert zyxel,nsa320-mcu to DT schema"
* tag 'hwmon-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (81 commits)
hwmon: tmp401: Read "ti,n-factor" as signed
hwmon: (pmbus/lm25066) Fix PMBus coefficients for LM5064/5066/5066i
hwmon: (gpd-fan) Reject EC PWM value 0 as invalid
hwmon: (dell-smm) Add Dell Latitude 7530 to fan control whitelist
hwmon: temperature: add support for EMC1812
dt-bindings: hwmon: temperature: add support for EMC1812
hwmon: (gpd-fan): fix race condition between device removal and sysfs access
hwmon: (gpd-fan): upgrade log level from warn to err for platform device creation failure
hwmon: (gpd-fan): Initialize EC before registering hwmon device
hwmon: (gpd-fan): drop global driver data and use per-device allocation
hwmon: (pmbus/max34440): add support adpm12250
hwmon: (ina238) Add update_interval_us attribute
hwmon: Add update_interval_us chip attribute
hwmon: (ina238) Add support for samples and update_interval
gpio: gpio-ltc4283: Add support for the LTC4283 Swap Controller
hwmon: ltc4283: Add support for the LTC4283 Swap Controller
dt-bindings: hwmon: Document the LTC4283 Swap Controller
hwmon: (pmbus/xdp720) Fix driver issues xdp720/730
hwmon: (pmbus/xdp720) Add support for efuse xdp730
dt-bindings: hwmon/pmbus: Add Infineon xdp730
...
|
|
Repair the docs build warnings in this file by unindenting the description,
adding blank lines, and using `` to quote *arg.
WARNING: Documentation/ABI/testing/sysfs-class-reboot-mode-reboot_modes:36: abi_sys_class_reboot_mode_driver_reboot_modes doesn't have a description
Documentation/ABI/testing/sysfs-class-reboot-mode-reboot_modes:1: ERROR: Unexpected indentation. [docutils]
Documentation/ABI/testing/sysfs-class-reboot-mode-reboot_modes:1: ERROR: Unexpected indentation. [docutils]
Documentation/ABI/testing/sysfs-class-reboot-mode-reboot_modes:1: WARNING: Inline emphasis start-string without end-string. [docutils]
Documentation/ABI/testing/sysfs-class-reboot-mode-reboot_modes:1: ERROR: Unexpected indentation. [docutils]
Fixes: d3da03025e6d ("Documentation: ABI: Add sysfs-class-reboot-mode-reboot_modes")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260426232705.422938-1-rdunlap@infradead.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v7.2 merge window
This includes following USB4/Thunderbolt changes for the v7.2 merge
window:
- Make the driver more compliant with the connection manager guide.
- Improvements over Thunderbolt XDomain service handling.
- USB4STREAM driver.
- Split out PCIe bits into pci.c to allow the driver to work on
non-PCIe hosts as well.
- Various fixes and improvements.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (41 commits)
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
thunderbolt: test: Release third DP tunnel
thunderbolt: Prevent XDomain delayed work use-after-free on disconnect
thunderbolt: test: Add KUnit tests for property parser bounds checks
thunderbolt: Add some more descriptive probe error messages
thunderbolt: Require nhi->ops be valid
thunderbolt: Separate out common NHI bits
thunderbolt: Move pci_device out of tb_nhi
thunderbolt: Increase Notification Timeout to 255 ms for USB4 routers
thunderbolt: Increase timeout for Configuration Ready bit
thunderbolt: Verify Router Ready bit is set after router enumeration
thunderbolt: Verify PCIe adapter in detect state before tunnel setup
thunderbolt: Activate path hops from source to destination
thunderbolt: Fix lane bonding log when bonding not possible
thunderbolt: Don't access path config space on Lane 1 adapters in tb_switch_reset_host()
thunderbolt: Improve multi-display DisplayPort tunnel allocation
docs: admin-guide: thunderbolt: Add instructions how to use USB4STREAM
thunderbolt: Add support for USB4STREAM
thunderbolt: Add support for ConfigFS
...
|
|
The ASUS Keystone is a physical NFC-like dongle that slots into supported
ASUS laptops. The EC fires WMI notify code 0xB4 on insert/remove events.
Expose the current insert state via a sysfs attribute by querying WMI
device ID 0x00120091 (DSTS). This devid does not follow the standard DSTS
convention: PRESENCE_BIT (0x00010000) encodes the insert state rather than
feature presence, and STATUS_BIT is never set. Presence of a keystone slot
is detected by a successful DSTS call.
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Dariusz Figzał <dariuszfigzal@gmail.com>
Link: https://patch.msgid.link/20260610164942.74956-1-dariuszfigzal@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some hardware monitoring chips support update intervals below one
millisecond. The existing update_interval attribute uses millisecond
granularity, which causes sub-millisecond steps to round to the same
value and become inaccessible from userspace.
Introduce update_interval_us, a companion chip-level attribute that
expresses the same update interval in microseconds. Drivers
implementing this attribute should also implement update_interval for
compatibility with millisecond-based userspace interfaces.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-2-016b55567950@advastore.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for Intel Key Protection Technology (KPT) on QAT GEN6
devices.
KPT protects private keys from exposure by keeping them wrapped
(encrypted) while in use, in-flight, and at rest. Keys remain in wrapped
form and are not exposed in plaintext in host memory. This feature
operates outside of the Linux crypto framework and kernel keyring.
Extend the firmware admin interface to enable and configure KPT. During
device initialisation, if KPT is enabled, the driver sends an admin
message to firmware to enable KPT mode and configure parameters such as
the maximum number of SWK (Symmetric Wrapping Key) slots and the SWK
time-to-live (TTL).
Expose KPT configuration via a new sysfs attribute group, "qat_kpt", and
add ABI documentation.
Co-developed-by: Nitesh Venkatesh <nitesh.venkatesh@intel.com>
Signed-off-by: Nitesh Venkatesh <nitesh.venkatesh@intel.com>
Signed-off-by: Junyuan Wang <junyuan.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add the possibility to disable the auto adjustment for input current
limitation via sysfs because it gives strange results under certain
circumstances e.g. when powering the device with solar panels
resulting in no input power usage at all.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20260504164017.467679-1-andreas@kemnade.info
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Reading the 'dbc' sysfs file won't return the "stalled" string
anymore as "stalled" is no longer considered a DbC state since
commit 9044ad57b60b ("xhci: dbc: Fix STALL transfer event handling")
in 6.12 kernel.
Remove it from sysfs-bus-pci-drivers-xhci_hcd ABI documentation
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260603091132.1110849-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
TDX module updates require userspace to select the appropriate module
to load. Expose necessary information to facilitate this decision. Two
values are needed:
- P-SEAMLDR version: for compatibility checks between TDX module and
P-SEAMLDR
- num_remaining_updates: indicates how many updates can be performed
Expose them as tdx-host device attributes visible only when updates
are supported.
Note that the underlying P-SEAMLDR attributes are available regardless
of update support; this only restricts their visibility to userspace.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-11-chao.gao@intel.com
|
|
For TDX module updates, userspace needs to select compatible update
versions based on the current module version.
For example, the 1.5.x series runs on Sapphire Rapids but not Granite
Rapids, which needs 2.0.x. Updates are also constrained by version
distance, so a 1.5.6 module might permit updates to 1.5.7 but not to
1.5.20.
Start the process of punting the version selection logic to userspace.
Expose the TDX module version in the new faux device.
Define TDX_VERSION_FMT macro for the TDX version format since it will be
used multiple times. Also convert an existing print statement to use it.
== Background ==
For posterity, here's what other firmware mechanisms do:
1. AMD SEV leverages an existing PCI device for the PSP to expose
metadata. TDX uses a faux device as it doesn't have PCI device
in its architecture.
2. Microcode uses per-CPU virtual devices to report microcode revisions
because CPUs can have different revisions. But, there is only a
single TDX module, so exposing the TDX module version through a global
TDX faux device is appropriate
3. ARM's CCA implementation isn't in-tree yet, but will likely follow a
similar faux device approach, though it's unclear whether they need
to expose firmware version information
[ dhansen: trim changelog ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/2025073035-bulginess-rematch-b92e@gregkh/ # [1]
Link: https://patch.msgid.link/20260520133909.409394-8-chao.gao@intel.com
|
|
Expose the device's Serial Number (SN) and UUID from EFUSE via two
read-only sysfs attributes, `serial_number` and `uuid`, on the ieee80211
phy device under the `rtw89_usb` attribute group.
This hardware identification information is essential for user-space
applications to uniquely identify, track, and manage specific Wi-Fi
adapters. For example, in automated factory provisioning or device
management systems, user-space tools rely on the EFUSE serial number and
UUID to bind configurations to specific physical adapters. Currently,
standard wireless APIs do not expose this low-level hardware
information, making these sysfs nodes the only viable solution for
user space to extract this data.
The attributes are gated behind a new RTW89_QUIRK_HW_INFO_SYSFS quirk,
enabled only for the VID 0x28de / PID 0x2432 device via the
dev_id_quirks field in rtw89_driver_info.
Example usage from user-space:
$ cat /sys/class/ieee80211/phy0/rtw89_usb/serial_number
3642000123
$ cat /sys/class/ieee80211/phy0/rtw89_usb/uuid
aaec2b7c-0a55-4727-8de0-b30febccbbaa
Cc: Elliot Saba <sabae@valvesoftware.com>
Cc: Charles Lohr <charlesl@valvesoftware.com>
Signed-off-by: Johnson Tsai <wenjie.tsai@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260529075032.16807-3-pkshih@realtek.com
|
|
``damon_target_idx`` was wrongly written as ``target_idx`` in the docs.
Fix it all over the place, as well as the wrong directory count, grammar,
etc.
Link: https://lore.kernel.org/20260520012104.93602-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: niecheng <niecheng1@uniontech.com>
Cc: Sakurai Shun <ssh1326@icloud.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a new channel type for sensors that report fractional coverage as
a percentage. The sysfs attribute is in_coverageY_raw; after applying
in_coverageY_scale the value is in percent. The first user is the
ADT7604 leak detector, where the value represents the portion of the
sensing element that is wetted.
Signed-off-by: Liviu Stan <liviu.stan@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Add powerdown mode entries for DACs with 500 Ohm, 3.85 kOhm, and
16 kOhm resistor to ground output impedance states. These are used
by the AD3531/AD3531R 4-channel DAC.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Now the 'filters/' directory is deprecated. Update ABI document to also
announce the fact. Also update the descriptions of the files to be based
on 'core_filter/' directory, to make the old descriptions ready to be
removed when the time arrives.
Link: https://lore.kernel.org/20260429150309.82282-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update DAMON ABI document for the DAMON context execution pause/resume
feature.
Link: https://lore.kernel.org/20260427151231.113429-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update DAMON ABI document for the DAMOS action failed regions quota charge
ratio control sysfs files.
Link: https://lore.kernel.org/20260428013402.115171-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Peter sadly passed away a while ago, so I'll be taking over as contact
for this ABI documentation.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
If the DW5826e is in a frozen state and unable to receive USB commands,
this driver provides a method for the user to reset the DW5826e via ACPI.
E.g: echo 1 > /sys/bus/platform/devices/PALC0001\:00/wwan_reset
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Jack Wu <jackbb_wu@compal.com>
Link: https://patch.msgid.link/20260526-dell-reset-v8-v8-1-d3a29cb4cf2f@compal.com
[ij: removed default m]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The term "capability" typically refers to an ability to perform an
action, whereas "capacity" denotes a measurable amount of resources.
Since the sysfs-driver-qat_rl document describes remaining resources
available to perform work, "capacity" is the more accurate term.
Replace "capability" with "capacity" in the document.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The default value should be 120 rather than 100, fix it.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch supports to report fserror, it provides another way to let
userspace to monitor filesystem level error. In addition, it exports
/sys/fs/f2fs/features/fserror once f2fs kernel module start to support
the new feature, then generic/791 of fstests can notice the feature,
and verify validation of fserror report.
Cc: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Introduce USB4STREAM protocol and Linux implementation. This allows two
(or more) hosts to transfer data directly over Thunderbolt/USB4 cable
through a character device without need to go through the network stack.
Any application that supports read(2) and write(2) in some form should
be able to use the device without changes. The data is sent out to the
other side over a tunnel inside Thunderbolt/USB4 fabric. The character
device is called /dev/tbstreamX where X is the minor number starting
from 0.
All stream devices need to be configured first. This is done through
ConfigFS interface. There can be multiple streams at the same time (this
depends on number of DMA rings and available HopIDs) and a single stream
supports traffic in both directions. For example there could be an
application that uses one stream as control channel and another one as
bi-directional data channel.
A real use-case for this is to take a backup as a part of recovery
initramfs tooling (no need to setup networking or have ssh or similar
tooling as part of the initramfs). Say we want to backup the disk of
host1 to host2. First Thunderbolt/USB4 cable is connected between the
hosts (there can be devices in the middle too) then the receiving side
configures the stream:
host2 # mkdir /sys/kernel/config/thunderbolt/stream/0-1.0
host2 # mkdir /sys/kernel/config/thunderbolt/stream/0-1.0/backup
host2 # echo -1 > /sys/kernel/config/thunderbolt/stream/0-1.0/backup/in_hopid
host2 # echo -1 > /sys/kernel/config/thunderbolt/stream/0-1.0/backup/out_hopid
We use automatic HopID allocation (writing -1 to HopIDs) for simplicity.
From this point forward the /dev/tbstream0 can be used pretty much as
regular file:
host2 # dd if=/dev/tbstream0 of=/tmp/host1.nvme0n1.backup-$(date +%F) bs=256k
The host that is being backed up then configures the stream accordingly:
host1 # mkdir /sys/kernel/config/thunderbolt/stream/0-503.0
host1 # mkdir /sys/kernel/config/thunderbolt/stream/0-503.0/backup
Here we take advantage of the fact that host2 also announces the active
streams through XDomain properties so the name "backup" gives us the
HopIDs. It is also possible to configure them manually in the same way
we did for host2.
Then it is just a matter of copying the data over:
host1 # dd if=/dev/nvme0n1 of=/dev/tbstream0 bs=256k
Similarly it is possible to transfer parts of the filesystem. For
example copy contents of mydir over to the host2:
host2 # gunzip < /dev/tbstream0 | tar xf -
host1 # tar cf - mydir | gzip > /dev/tbstream0
Other end of the spectrum use-case is "borrowing" laptop (host1) camera
to desktop (host2):
host2 # gst-launch-1.0 filesrc location=/dev/tbstream0 ! jpegdec ! videoconvert ! \
autovideosink
host1 # gst-launch-1.0 v4l2src device=/dev/video0 ! video/x-raw,width=1920,height=1080 ! \
jpegenc quality=90 ! filesink location=/dev/tbstream0
Once the streams are no longer needed they can be removed:
host1 # cd /sys/kernel/config/thunderbolt/stream/
host1 # rmdir -p 0-503.0/backup
host2 # cd /sys/kernel/config/thunderbolt/stream
host2 # rmdir -p 0-1.0/backup
Co-developed-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add configurable frequency limits to allow users to constrain the NPU
operating frequency range for power and thermal management. This support
requires firmware API version 3.34.0 or newer.
New sysfs interface:
The freq/ subdirectory contains the following attributes:
- hw_min_freq: Minimum frequency supported by hardware (read-only)
- hw_max_freq: Maximum frequency supported by hardware (read-only)
- hw_efficient_freq: Hardware's optimal operating frequency (read-only)
- current_freq: Current NPU frequency in MHz (read-only)
- set_min_freq: Configure minimum operating frequency (50XX+ devices)
- set_max_freq: Configure maximum operating frequency (50XX+ devices)
Legacy attributes npu_max_frequency_mhz and npu_current_frequency_mhz
are maintained for backward compatibility.
Implementation details:
- Frequency configuration is communicated to firmware via JSM messages
- User-specified frequency values are clamped to hardware limits
- Power-efficient frequency (pn_ratio) is adjusted dynamically to stay
within the configured range
- Frequency configuration is initialized during device boot
- The JSM API header is updated to version 3.34.0 to support the new
VPU_JSM_MSG_FREQ_CONFIG firmware message
Added description for the sysfs attributes in the Documentation/ABI.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260408150152.2093638-1-andrzej.kacprowski@linux.intel.com
|
|
This modifier applies to the IIO_ROT channel type, and indicates a data
representation that specifies the {x, y, z} components of the normalized
quaternion vector.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In the data storage description of a scan element, the first character
after the colon can have the values 's' and 'u' to specify signed and
unsigned integers, respectively.
Add 'f' as an allowed value to specify floating-point numbers formatted
according to the IEEE 754 standard.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / and others driver updates from Greg KH:
"Here is the char/misc/iio and other smaller driver subsystem updates
for 7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:
- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)
- lots of comedi driver updates and bugfixes
- coresight driver updates
- interconnect driver updates and additions
- mei driver updates
- binder (both rust and C versions) updates and fixes
- lots of other smaller driver subsystem updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (405 commits)
coresight: tpdm: fix invalid MMIO access issue
mei: me: add nova lake point H DID
mei: lb: add late binding version 2
mei: bus: add mei_cldev_uuid
w1: ds2490: drop redundant device reference
bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
mei: csc: wake device while reading firmware status
mei: csc: support controller with separate PCI device
mei: convert PCI error to common errno
mei: trace: print return value of pci_cfg_read
mei: me: move trace into firmware status read
mei: fix idle print specifiers
mei: me: use PCI_DEVICE_DATA macro
sonypi: Convert ACPI driver to a platform one
misc: apds990x: fix all kernel-doc warnings
most: usb: Use kzalloc_objs for endpoint address array
hpet: Convert ACPI driver to a platform one
misc: vmw_vmci: Fix spelling mistakes in comments
parport: Remove completed item from to-do list
char: remove unnecessary module_init/exit functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, the changes primarily focus on resolving race
conditions, memory safety issues (UAF), and improving the robustness
of garbage collection (GC), and folio management.
Enhancements:
- add page-order information for large folio reads in iostat
- add defrag_blocks sysfs node
Bug fixes:
- fix uninitialized kobject put in f2fs_init_sysfs()
- disallow setting an extension to both cold and hot
- fix node_cnt race between extent node destroy and writeback
- preserve previous reserve_{blocks,node} value when remount
- freeze GC and discard threads quickly
- fix false alarm of lockdep on cp_global_sem lock
- fix data loss caused by incorrect use of nat_entry flag
- skip empty sections in f2fs_get_victim
- fix inline data not being written to disk in writeback path
- fix fsck inconsistency caused by FGGC of node block
- fix fsck inconsistency caused by incorrect nat_entry flag usage
- call f2fs_handle_critical_error() to set cp_error flag
- fix fiemap boundary handling when read extent cache is incomplete
- fix use-after-free of sbi in f2fs_compress_write_end_io()
- fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io()
- fix incorrect file address mapping when inline inode is unwritten
- fix incomplete search range in f2fs_get_victim when f2fs_need_rand_seg is enabled
- avoid memory leak in f2fs_rename()"
* tag 'f2fs-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (35 commits)
f2fs: add page-order information for large folio reads in iostat
f2fs: do not support mmap write for large folio
f2fs: fix uninitialized kobject put in f2fs_init_sysfs()
f2fs: protect extension_list reading with sb_lock in f2fs_sbi_show()
f2fs: disallow setting an extension to both cold and hot
f2fs: fix node_cnt race between extent node destroy and writeback
f2fs: allow empty mount string for Opt_usr|grp|projjquota
f2fs: fix to preserve previous reserve_{blocks,node} value when remount
f2fs: invalidate block device page cache on umount
f2fs: fix to freeze GC and discard threads quickly
f2fs: fix to avoid uninit-value access in f2fs_sanity_check_node_footer
f2fs: fix false alarm of lockdep on cp_global_sem lock
f2fs: fix data loss caused by incorrect use of nat_entry flag
f2fs: fix to skip empty sections in f2fs_get_victim
f2fs: fix inline data not being written to disk in writeback path
f2fs: fix fsck inconsistency caused by FGGC of node block
f2fs: fix fsck inconsistency caused by incorrect nat_entry flag usage
f2fs: fix to do sanity check on dcc->discard_cmd_cnt conditionally
f2fs: refactor node footer flag setting related code
f2fs: refactor f2fs_move_node_folio function
...
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).
The substantive core changes are adding a 'serial' sysfs attribute and
getting sd to support > PAGE_SIZE sectors"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits)
scsi: target: Don't validate ignored fields in PROUT PREEMPT
scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP
scsi: mpi3mr: Fix typo
scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
scsi: libsas: Delete unused to_dom_device() and to_dev_attr()
scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
scsi: lpfc: Update lpfc version to 15.0.0.0
scsi: lpfc: Add PCI ID support for LPe42100 series adapters
scsi: lpfc: Introduce 128G link speed selection and support
scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
scsi: lpfc: Update construction of SGL when XPSGL is enabled
scsi: lpfc: Remove deprecated PBDE feature
scsi: lpfc: Add REG_VFI mailbox cmd error handling
scsi: lpfc: Log MCQE contents for mbox commands with no context
scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
scsi: ufs: core: Make the header files self-contained
scsi: ufs: core: Remove an include directive from ufshcd-crypto.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"asus-wmi:
- Retain battery charge threshold during boot which avoids
unsolicited change to 100%. Return -ENODATA when the limit
is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
barco-p50-gpio:
- Normalize gpio_get return values
bitland-mifs-wmi:
- Add driver for Bitland laptops (supports platform profile,
hwmon, kbd backlight, gpu mode, hotkeys, and fan boost)
dell_rbu:
- Fix using uninitialized value in sysfs write function
dell-wmi-sysman:
- Respect destination length when constructing enum strings
hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and
Omen MAX 16-ak0xxxx
input: trackpoint & thinkpad_acpi:
- Enable doubletap by default and add sysfs enable/disable
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
intel/vsec:
- Refactor to support ACPI-enumerated PMT endpoints.
pcengines-apuv2:
- Attach software node to the gpiochip
uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
wmi:
- Perform output size check within WMI core to allow simpler WMI
drivers
misc:
- acpi_driver -> platform driver conversions (a large number of
changes from Rafael J. Wysocki)
- cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits)
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C77)
platform/x86: hp-wmi: Add support for Omen 16-n0xxx (8A44)
platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8D87)
platform/x86: hp-wmi: fix fan table parsing
platform/x86: hp-wmi: add Omen 14-fb0xxx (board 8C58) support
platform/wmi: Replace .no_notify_data with .min_event_size
platform/wmi: Extend wmidev_query_block() to reject undersized data
platform/wmi: Extend wmidev_invoke_method() to reject undersized data
platform/wmi: Prepare to reject undersized unmarshalling results
platform/wmi: Convert drivers to use wmidev_invoke_procedure()
platform/wmi: Add wmidev_invoke_procedure()
platform/x86: int3472: Add support for GPIO type 0x02 (IR flood LED)
platform/x86: int3472: Parameterize LED con_id in registration
platform/x86: int3472: Rename pled to led in LED registration code
platform/x86: int3472: Use local variable for LED struct access
platform/x86: thinkpad_acpi: remove obsolete TODO comment
platform/x86: dell-wmi-sysman: bound enumeration string aggregation
platform/x86: hp-wmi: Ignore backlight and FnLock events
platform/x86: uniwill-laptop: Fix signedness bug
platform/x86: dell_rbu: avoid uninit value usage in packet_size_write()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 7.1-rc1.
Lots of little things in here, nothing major, just constant
improvements, updates, and new features. Highlights are:
- new USB power supply driver support.
These changes did touch outside of drivers/usb/ but got acks from
the relevant mantainers for them.
- dts file updates and conversions
- string function conversions into "safer" ones
- new device quirks
- xhci driver updates
- usb gadget driver minor fixes
- typec driver additions and updates
- small number of thunderbolt driver changes
- dwc3 driver updates and additions of new hardware support
- other minor driver updates
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (176 commits)
usb: dwc3: starfive: Add JHB100 USB 2.0 DRD controller
dt-bindings: usb: dwc3: add support for StarFive JHB100
dt-bindings: usb: atmel,at91sam9rl-udc: convert to DT schema
dt-bindings: usb: atmel,at91rm9200-udc: convert to DT schema
dt-bindings: usb: generic-ehci: fix schema structure and add at91sam9g45 constraints
dt-bindings: usb: generic-ohci: add AT91RM9200 OHCI binding support
arm: dts: at91: remove unused #address-cells/#size-cells from sam9x60 udc node
drivers/usb/host: Fix spelling error 'seperate' -> 'separate'
usbip: tools: add hint when no exported devices are found
USB: serial: iuu_phoenix: fix iuutool author name
usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()
usb: gadget: f_phonet: fix skb frags[] overflow in pn_rx_complete()
usb: gadget: f_hid: Add missing error code
usb: typec: cros_ec_ucsi: Load driver from OF and ACPI definitions
dt-bindings: chrome: Add cros-ec-ucsi compatibility to typec binding
USB: of: Simplify with scoped for each OF child loop
usbip: validate number_of_packets in usbip_pack_ret_submit()
usb: gadget: renesas_usb3: validate endpoint index in standard request handlers
usb: core: config: reverse the size check of the SSP isoc endpoint descriptor
usb: typec: ucsi: Set usb mode on partner change
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Subsystem:
- add sysfs option to rescan bus via entdaa
- fix error code handling for send_ccc_cmd
Drivers:
- mipi-i3c-hci-pci: Intel Nova Lake-H I3C support"
* tag 'i3c/for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (22 commits)
i3c: mipi-i3c-hci: fix IBI payload length calculation for final status
i3c: master: adi: Fix error propagation for CCCs
i3c: master: Fix error codes at send_ccc_cmd
i3c: master: Move bus_init error suppression
i3c: master: Move entdaa error suppression
i3c: master: Move rstdaa error suppression
i3c: dw: Simplify xfer cleanup with __free(kfree)
i3c: dw: Fix memory leak in dw_i3c_master_i3c_xfers()
i3c: master: renesas: Use __free(kfree) for xfer cleanup in renesas_i3c_send_ccc_cmd()
i3c: master: renesas: Fix memory leak in renesas_i3c_i3c_xfers()
i3c: master: dw-i3c: Balance PM runtime usage count on probe failure
i3c: master: dw-i3c: Fix missing reset assertion in remove() callback
i3c: mipi-i3c-hci-pci: Enable IBI while runtime suspended for Intel controllers
i3c: mipi-i3c-hci-pci: Add optional ability to manage child runtime PM
i3c: mipi-i3c-hci: Allow parent to manage runtime PM
i3c: mipi-i3c-hci: Add quirk to allow IBI while runtime suspended
i3c: mipi-i3c-hci-pci: Set d3hot_delay to 0 for Intel controllers
i3c: fix missing newline in dev_err messages
i3c: master: use kzalloc_flex
i3c: mipi-i3c-hci-pci: Add support for Intel Nova Lake-H I3C
...
|
|
Pull CXL (Compute Express Link) updates from Dave Jiang:
"The significant change of interest is the handling of soft reserved
memory conflict between CXL and HMEM. In essence CXL will be the first
to claim the soft reserved memory ranges that belongs to CXL and
attempt to enumerate them with best effort. If CXL is not able to
enumerate the ranges it will punt them to HMEM.
There are also MAINTAINERS email changes from Dan Williams and
Jonathan Cameron"
* tag 'cxl-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (37 commits)
MAINTAINERS: Update Jonathan Cameron's email address
cxl/hdm: Add support for 32 switch decoders
MAINTAINERS: Update address for Dan Williams
tools/testing/cxl: Enable replay of user regions as auto regions
cxl/region: Add a region sysfs interface for region lock status
tools/testing/cxl: Test dax_hmem takeover of CXL regions
tools/testing/cxl: Simulate auto-assembly failure
dax/hmem: Parent dax_hmem devices
dax/hmem: Fix singleton confusion between dax_hmem_work and hmem devices
dax/hmem: Reduce visibility of dax_cxl coordination symbols
cxl/region: Constify cxl_region_resource_contains()
cxl/region: Limit visibility of cxl_region_contains_resource()
dax/cxl: Fix HMEM dependencies
cxl/region: Fix use-after-free from auto assembly failure
cxl/core: Check existence of cxl_memdev_state in poison test
cxl/core: use cleanup.h for devm_cxl_add_dax_region
cxl/core/region: move dax region device logic into region_dax.c
cxl/core/region: move pmem region driver logic into region_pmem.c
dax/hmem, cxl: Defer and resolve Soft Reserved ownership
cxl/region: Add helper to check Soft Reserved containment by CXL regions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"There are two main changes, one feature removal, some code cleanup,
and a number of bug fixes.
Main changes:
- Detecting secure boot mode was limited to IMA. Make detecting
secure boot mode accessible to EVM and other LSMs
- IMA sigv3 support was limited to fsverity. Add IMA sigv3 support
for IMA regular file hashes and EVM portable signatures
Remove:
- Remove IMA support for asychronous hash calculation originally
added for hardware acceleration
Cleanup:
- Remove unnecessary Kconfig CONFIG_MODULE_SIG and CONFIG_KEXEC_SIG
tests
- Add descriptions of the IMA atomic flags
Bug fixes:
- Like IMA, properly limit EVM "fix" mode
- Define and call evm_fix_hmac() to update security.evm
- Fallback to using i_version to detect file change for filesystems
that do not support STATX_CHANGE_COOKIE
- Address missing kernel support for configured (new) TPM hash
algorithms
- Add missing crypto_shash_final() return value"
* tag 'integrity-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
evm: Enforce signatures version 3 with new EVM policy 'bit 3'
integrity: Allow sigv3 verification on EVM_XATTR_PORTABLE_DIGSIG
ima: add support to require IMA sigv3 signatures
ima: add regular file data hash signature version 3 support
ima: Define asymmetric_verify_v3() to verify IMA sigv3 signatures
ima: remove buggy support for asynchronous hashes
integrity: Eliminate weak definition of arch_get_secureboot()
ima: Add code comments to explain IMA iint cache atomic_flags
ima_fs: Correctly create securityfs files for unsupported hash algos
ima: check return value of crypto_shash_final() in boot aggregate
ima: Define and use a digest_size field in the ima_algo_desc structure
powerpc/ima: Drop unnecessary check for CONFIG_MODULE_SIG
ima: efi: Drop unnecessary check for CONFIG_MODULE_SIG/CONFIG_KEXEC_SIG
ima: fallback to using i_version to detect file change
evm: fix security.evm for a file with IMA signature
s390: Drop unnecessary CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT
evm: Don't enable fix mode when secure boot is enabled
integrity: Make arch_ima_get_secureboot integrity-wide
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply drivers:
- S2MU005: new battery fuel gauge driver
- macsmc-power: new driver for Apple Silicon
- qcom_battmgr: Add support for Glymur and Kaanapali
- max17042: add support for max77759
- qcom_smbx: allow disabling charging
- bd71828: add input current limit support
- multiple drivers: use new device managed workqueue allocation
function
- misc small cleanups and fixes
Reset core:
- Expose sysfs for registered reboot_modes
Reset drivers
- misc small cleanups and fixes"
* tag 'for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (36 commits)
power: supply: qcom_smbx: allow disabling charging
power: reset: drop unneeded dependencies on OF_GPIO
power: supply: bd71828: add input current limit property
dt-bindings: power: reset: cortina,gemini-power-controller: convert to DT schema
power: supply: add support for S2MU005 battery fuel gauge device
dt-bindings: power: supply: document Samsung S2MU005 battery fuel gauge
power: reset: reboot-mode: fix -Wformat-security warning
power: supply: ipaq_micro: Simplify with devm
power: supply: mt6370: Simplify with devm_alloc_ordered_workqueue()
power: supply: max77705: Free allocated workqueue and fix removal order
power: supply: max77705: Drop duplicated IRQ error message
power: supply: cw2015: Free allocated workqueue
power: reset: keystone: Use register_sys_off_handler(SYS_OFF_MODE_RESTART)
power: supply: twl4030_madc: Drop unused header includes
power: supply: bq24190: Avoid rescheduling after cancelling work
power: supply: axp288_charger: Simplify returns of dev_err_probe()
power: supply: axp288_charger: Do not cancel work before initializing it
power: supply: cpcap-battery: pass static battery cell data from device tree
dt-bindings: power: supply: cpcap-battery: document monitored-battery property
power: supply: qcom_battmgr: Add support for Glymur and Kaanapali
...
|
