| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2:
- core: fix subdev sensor ownership
- subdev: Allow accessing routes with STREAMS client capability
- ctrls: Add validation for HEVC active reference counts and
background detection control
- common: Add YUV24 format info and has_alpha helper
- vb2: Change vb2_read() and vb2_write() return types to ssize_t
- i2c: cvs: Add driver of Intel Computer Vision Sensing Controller(CVS)
- atmel-isc: remove deprecated driver
- cec: Add CEC Latency Indication Protocol (LIP) support
- imon: Add iMON VFD HID OEM v1.2 key mappings
- AVMatrix: new HWS capture driver
- isp4: new AMD capture driver
- qcom:
- iris: Add hierarchical coding, B-frame, and Long-Term Reference
support for encoder
- camss: Add SM6350 platform support
- venus: Add SM6115 platform support
- chips-media: wave5: Add support for Packed YUV422, CBP profile, and
background detection
- csi2rx: Add multistream support and 32 dma chans
- Several cleanups and fixes
* tag 'media/v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
media: qcom: iris: vdec: allow GEN2 decoding into 10bit format
media: qcom: iris: vdec: update find_format to handle 8bit and 10bit formats
media: qcom: iris: vdec: update size and stride calculations for 10bit formats
media: qcom: iris: gen2: add support for 10bit decoding
media: qcom: iris: add QC10C & P010 buffer size calculations
media: qcom: iris: add helpers for 8bit and 10bit formats
media: qcom: iris: Fix FPS calculation and VPP FW overhead
media: qcom: camss: vfe-340: Support for PIX client
media: qcom: camss: vfe-340: Proper client handling
media: qcom: camss: csid-340: Enable PIX interface routing
media: qcom: camss: csid-340: Add port-to-interface mapping
media: qcom: camss: csid-340: Switch to generic CSID_CFG/CTRL registers
media: iris: Initialize HFI ops after firmware load in core init
media: iris: drop struct iris_fmt
media: iris: Add platform data for X1P42100
media: iris: Add hardware power on/off ops for X1P42100
media: iris: optimize COMV buffer allocation for VPU3x and VPU4x
media: iris: add FPS calculation and VPP FW overhead in frequency formula
media: qcom: iris: Simplify COMV size calculation
...
|
|
Add a reference to the LINK_FREQ control and clarify the meaning of the
control as for C-PHY the matter is less obvious.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Tell driver authors to use pm_runtime_get_if_active() instead of
pm_runtime_get_if_in_use() to check the device's power state in the s_ctrl
callback. pm_runtime_get_if_active() is the right function to use here
since it returns non-zero if the device is powered on rather than its
PM runtime usage_count is non-zero.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Update the documentation to reflect new type-aware kmalloc-family as
suggested in commit 2932ba8d9c99 ("slab: Introduce kmalloc_obj()
and family")
ptr = kmalloc(sizeof(*ptr), gfp);
-> ptr = kmalloc_obj(*ptr, gfp);
ptr = kmalloc(sizeof(struct some_obj_name), gfp);
-> ptr = kmalloc_obj(*ptr, gfp);
ptr = kzalloc(sizeof(*ptr), gfp);
-> ptr = kzalloc_obj(*ptr, gfp);
ptr = kmalloc_array(count, sizeof(*ptr), gfp);
-> ptr = kmalloc_objs(*ptr, count, gfp);
ptr = kcalloc(count, sizeof(*ptr), gfp);
-> ptr = kzalloc_objs(*ptr, count, gfp);
Signed-off-by: Manuel Ebner <manuelebner@mailbox.org>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260429071445.309733-2-manuelebner@mailbox.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new CSI tegra support, covering Tegra20 and Tegra30
- new camera sensor drivers: T4ka3 and ov2732
- m88ds3103: add 3103c chip support
- uvcvideo: add support for Intel RealSense D436/D555 and P010 pixel format
- synopsys csi2rx: add i.MX93 support
- imx8-isi: add i.MX95 support
- imx8mq-mipi-csi2: add i.MX8ULP support
- dw100: add V4L2 requests support
- support for DTV devices from Hauppauge got some improvements
- media staging: dropped starfive-camss driver
- media docs: document multi-committers model and improve maint profile
- media core:
- add v4l2_subdev_get_frame_desc_passthrough() helper
- improve error handling in fwnode parsing
- lots of driver fixes, cleanups and improvements
* tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (251 commits)
Revert "media: cx231xx: add USB ID 2040:8360 for Hauppauge WinTV-HVR-935"
media: synopsys: csi2rx: add i.MX93 support
media: dt-bindings: add NXP i.MX93 compatible string
media: synopsys: csi2rx: Use enum and u32 array for register offsets
media: synopsys: csi2rx: implement .get_frame_desc() callback
media: synopsys: csi2rx: only check errors from devm_clk_bulk_get_all()
media: synopsys: csi2rx: use devm_reset_control_get_optional_exclusive()
media: i2c: imx283: add support for non-continuous MIPI clock mode
media: i2c: ov08d10: add support for 24 MHz input clock
media: i2c: ov08d10: add support for reset and power management
media: i2c: ov08d10: add support for binding via device tree
dt-bindings: media: i2c: document Omnivision OV08D10 CMOS image sensor
media: i2c: ov08d10: add missing newline to prints
media: i2c: ov08d10: fix some typos in comments
media: i2c: ov08d10: remove duplicate register write
media: i2c: ov08d10: fix image vertical start setting
media: i2c: ov08d10: fix runtime PM handling in probe
staging: media: ipu7: Update TODO
media: Add t4ka3 camera sensor driver
media: i2c: Add ov2732 image sensor driver
...
|
|
Replace "an a few" with "and a few" in
Documentation/driver-api/media/drivers/zoran.rst.
Signed-off-by: Gleb Golovko <gaben123001@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260407212818.925-1-gaben123001@gmail.com>
|
|
As the media subsystem will experiment with a multi-committers model,
update the Maintainer's entry profile to the new rules, and add a file
documenting the process to become a committer and to maintain such
rights.
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Document who the Media Maintainers are and what their
responsibilities are.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
As the media subsystem will experiment with a multi-committers model,
update the Maintainer's entry profile to the new rules.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Sean Young <sean@mess.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Since vb2 now relies on the presence of the vb2_queue lock
field and there are no more drivers that use these helpers, it is safe
to drop them.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add to the driver-api documentation the v4l2-isp.h types and
helpers documentation.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
|
|
Replace incorrect plural form "busses" with "buses" in
multiple documentation files under "Documentation/driver-api".
Signed-off-by: Marneni PoornaChandu <Poornachandumarneni@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250917220430.5815-1-Poornachandumarneni@gmail.com>
|
|
Replace hverkuil@xs4all.nl by hverkuil@kernel.org.
Signed-off-by: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
obtaining the clock
Add the new v4l2 helper devm_v4l2_sensor_clk_get() to Documentation. the
helper works on both DT- and ACPI-based platforms to retrieve a
reference to the clock producer from firmware.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Now that all drivers use v4l2_fh, we can drop the V4L2_FL_USES_V4L2_FH
checks through the V4L2 core.
To ensure that all new drivers use v4l2_fh, keep setting the
V4L2_FL_USES_V4L2_FH flag in v4l2_fh_init(), and verify it is set after
the .open() file operation returns.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Multiple drivers that use v4l2_fh and call v4l2_fh_del() manually reset
the file->private_data pointer to NULL in their video device .release()
file operation handler. Move the code to the v4l2_fh_del() function to
avoid direct access to file->private_data in drivers. This requires
adding a file pointer argument to the function.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- filp->private_data = NULL;
...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...
- filp->private_data = NULL;
...>
}
@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}
Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_del() prototype and reset file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_del() function prototype
and its documentation.
Additionally, white space issues have been fixed manually in
drivers/usb/gadget/function/uvc_v4l2.c
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
All the drivers that use v4l2_fh and call v4l2_fh_add() manually store a
pointer to the v4l2_fh instance in file->private_data in their video
device .open() file operation handler. Move the code to the
v4l2_fh_add() function to avoid direct access to file->private_data in
drivers. This requires adding a file pointer argument to the function.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- filp->private_data = fh;
...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...>
}
@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...
- filp->private_data = fh;
...>
}
Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_add() prototype set file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_add() function prototype
and its documentation.
Additionally, white space issues have been fixed manually in
drivers/media/platform/nvidia/tegra-vde/v4l2.c,
drivers/media/platform/rockchip/rkvdec/rkvdec.c,
drivers/media/v4l2-core/v4l2-fh.c and
drivers/staging/most/video/video.c.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Accessing file->private_data manually to retrieve the v4l2_fh pointer is
error-prone, as the field is a void * and will happily convert
implicitly to any pointer type. To avoid direct access to
file->private_data, introduce a new inline function that retrieves the
v4l2_fh pointer, and use it to replace common access patterns through
the kernel.
Changes to drivers have been generated with the following coccinelle
semantic patch:
@@
struct file *filp;
identifier fh;
@@
- struct v4l2_fh *fh = filp->private_data;
+ struct v4l2_fh *fh = file_to_v4l2_fh(filp);
Manual changes have been applied to Documentation/ to update the usage
patterns, and to include/media/v4l2-fh.h to add the new function.
While at it, fix a typo in the title of v4l2-fh.rst: the file describes
the "file handles" API, not "file handlers".
No functional change is intended, this only paves the way to remove
direct accesses to file->private_data and make V4L2 drivers safer.
Other accesses to the field will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
v4l2_ctrl_handler_free() no longer resets the handler's error code.
Document it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- platform: synopsys: hdmirx: Fix 64-bit division for 32-bit targets
- vim2m: print device name after registering device
- Synopsys DesignWare HDMI RX Driver and various fixes
- cec/printk fixes and the removal of the vidioc_g/s_ctrl and
vidioc_queryctrl callbacks
- AVerMedia H789-C PCIe support and rc-core structs padding
- Several camera sensor patches
- uvcvideo improvements
- visl: Fix ERANGE error when setting enum controls
- codec fixes
- V4L2 camera sensor patches mostly
- chips-media: wave5: Fixes
- Add SDM670 camera subsystem
- Qualcomm iris video decoder driver
- dt-bindings: update clocks for sc7280-camss
- various fixes and enhancements
* tag 'media/v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (264 commits)
media: pci: mgb4: include linux/errno.h
media: synopsys: hdmirx: Fix signedness bug in hdmirx_parse_dt()
media: platform: synopsys: hdmirx: Fix 64-bit division for 32-bit targets
media: vim2m: print device name after registering device
media: vivid: Introduce VIDEO_VIVID_OSD
media: vivid: Move all fb_info references into vivid-osd
media: platform: synopsys: hdmirx: Optimize struct snps_hdmirx_dev
media: platform: synopsys: hdmirx: Remove unused HDMI audio CODEC relics
media: platform: synopsys: hdmirx: Remove duplicated header inclusion
media: qcom: Clean up Kconfig dependencies
media: dvb-frontends: tda10048: Make the range of z explicit.
media: platform: stm32: Add check for clk_enable()
media: xilinx-tpg: fix double put in xtpg_parse_of()
media: siano: Fix error handling in smsdvb_module_init()
media: c8sectpfe: Call of_node_put(i2c_bus) only once in c8sectpfe_probe()
media: i2c: tda1997x: Call of_node_put(ep) only once in tda1997x_parse_dt()
dt-bindings: media: mediatek,vcodec: Revise description
dt-bindings: media: mediatek,jpeg: Relax IOMMU max item count
media: v4l2-dv-timings: prevent possible overflow in v4l2_detect_gtf()
media: rockchip: rga: fix rga offset lookup
...
|
|
Document that receiver drivers should call v4l2_get_link_freq() to obtain
the link frequency.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The subsection on stopping the transmitter belongs to the generic part and
is not specific to CSI-2. Move it out of the CSI-2 section.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add the get_mbus_config() as the means for conveying the link frequency
towards the receiver drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Fixed some spelling mistakes identified by misspell tool.
The example code in Documentation/driver-api/nvdimm/nvdimm.rst contained a
misspelled identifier (paramaters instead of parameters).
This typo would have caused a compilation error if copied as-is.
Signed-off-by: Aditya Dutt <duttaditya18@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250211103002.199004-1-duttaditya18@gmail.com
|
|
bus-type endpoint property contains the information.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix formatting under "``.enable_streams()`` and ``.disable_streams()``
callbacks" in tx-rx.rst.
Fixes: 30fe661eb9d3 ("media: Documentation: Deprecate s_stream video op, update docs")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
dma_ops override is not in code anymore, so remove it.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The scope of the s_stream video operation is now fully supported by
{enable,disable}_streams. Explicitly document the s_stream() op as
deprecated and update the related documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The graph walk API has been deprecated in commit eac564de0915 ("media:
mc: entity: Add entity iterator for media_pipeline") in favour of
pipelien iterators, but the MC documentation hasn't been updated
accordingly. It still documents the deprecated API as the only option.
Fix it by dropping the deprecated function, and documenting the new API.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240822212445.2037-5-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Enable documentation for v4l2-jpeg header related helper functions which
are useful for parsing jpeg files while decoding or creating jpeg headers
while encoding.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
overview
Add a documentation for an overview of IPU6 hardware and describe the main
the components of IPU6 driver.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This patch resolves a spelling error in the documentation.
It is submitted as part of my application to the "Linux Kernel Bug
Fixing Spring Unpaid 2024" mentorship program of the Linux Kernel
Foundation.
Signed-off-by: Vincenzo Mezzela <vincenzo.mezzela@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Drop duplicated UAPI specific portions of the CCS (kernel) documentation
and fix a spelling error in UAPI documentation previously fixed in driver
documentation.
Also add references both ways.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l core: subdev frame interval now supports which field
- v4l kapi: moves and renames the init_cfg pad op to init_state as an
internal op.
- new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900
- new camera driver: STM32 DCMIPP
- s5p-mfc has gained MFC v12 support
- new ISP driver added to staging: Starfive
- new stateful encoder/decoded: Wave5 codec It is found on the J721S2
SoC, JH7100 SoC, ssd202d SoC. Etc.
- fwnode gained support for MIPI "DisCo for Imaging"
(https://www.mipi.org/specifications/mipi-disco-imaging)
- as usual, lots of cleanups, fixups and driver improvements.
* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
media: i2c: thp7312: select CONFIG_FW_LOADER
media: i2c: mt9m114: use fsleep() in place of udelay()
media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
media: i2c: thp7312: Store frame interval in subdev state
media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
media: docs: uAPI: Expand error documentation for invalid 'which' value
media: docs: uAPI: Clarify error documentation for invalid 'which' value
media: v4l2-subdev: Store frame interval in subdev state
media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
media: s5p-mfc: Load firmware for each run in MFCv12.
media: s5p-mfc: Set context for valid case before calling try_run
media: s5p-mfc: Add support for DMABUF for encoder
media: s5p-mfc: Add support for UHD encoding.
media: s5p-mfc: Add support for rate controls in MFCv12
media: s5p-mfc: Add YV12 and I420 multiplanar format support
media: s5p-mfc: Add initial support for MFCv12
media: s5p-mfc: Rename IS_MFCV10 macro
...
|
|
LP-11 and LP-111 are CSI-2 bus states, not modes. Fix this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
BT.601 is not actually a bus specification, leaving parallel bus without a
specification to refer to. Fix this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Generate register definitions that are fit for use with V4L2 CCI.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Document that sub-device initialisation needs to complete before the async
sub-device is registered as there is no further driver action needed
before the sensor becomes accessible via the UAPI.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
V4L2 subdev operations have moved from operating on a
v4l2_subdev_pad_config to a v4l2_subdev_state a long time ago. Fix the
few remaining incorrect references to pad config in the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Vegard Nossum writes:
This patch series replaces some instances of 'class:: toc-title' with
toctree's :caption: attribute, see the last patch in the series for some
more rationale/explanation.
|
|
"class:: toc-title" was a workaround for older Sphinx versions that are
no longer supported.
The canonical way to add a heading to the ToC is to use :caption:.
Do that.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Armin Wolf <W_Armin@gmx.de>
Cc: Iwona Winiarska <iwona.winiarska@intel.com>
Cc: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: linux-media@vger.kernel.org
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Alex Shi <alexs@kernel.org>
Cc: Wu XiangCheng <bobwxc@email.cn>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231027081830.195056-7-vegard.nossum@oracle.com
|
|
Correct the wrong spelling of 'exposes' in the binner section.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Split camera sensor documentation into user and kernel portions. This
should make it easier for the user space developers to find the relevant
documentation.
Also add a list of exemplary drivers and add imx219 driver to it, besides
those that were already mentioned.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The last driver that still used this old framework has been converted
to the videobuf2 framework. So it is now time to delete the old videobuf
code.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Camera sensor drivers are highly subject to cargo cult programming, with
back practices being copied from old to new drivers. In particular, many
drivers implement system and runtime PM incorrectly. As a first step
towards fixing this situation, refactor and expand the power management
documentation to detail correct usage of system and runtime PM.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Move the power management section up, just after clocks, as it relates
to internal system resources and not features exposed to applications.
The text itself is otherwise unchanged.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The Documentation/devicetree/bindings/clock/clock-bindings.txt file is
deprecated and points to clock-bindings.yaml, which is not hosted in the
kernel source tree. Use an HTTPS link to refer to the YAML binding
document.
While at it, drop "currently" from the paragraph, as the whole file
refers to the current recommended practices except where explicitly
noted.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Drop an unneeded double colon, and use 'shall' instead of 'must' for
consistency with the rest of the file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
CCS tools is a useful set of programs and libraries for working with CCS
static data. Do mention that in context of the CCS driver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
