summaryrefslogtreecommitdiff
path: root/Documentation/netlink
AgeCommit message (Collapse)Author
2026-06-18Merge tag 'nfsd-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds
Pull nfsd updates from Chuck Lever: "Jeff Layton wired up netlink upcalls for the auth.unix.ip and auth.unix.gid caches in SunRPC and the svc_export and nfsd.fh caches in NFSD. The new kernel-user API is more extensible and lays the groundwork for retiring the old pipe interface. The default NFS r/w block size rises to 4MB on hosts with at least 16GB of RAM, reducing per-RPC overhead on fast networks. Smaller machines keep their previously computed default, and the value remains tunable through /proc/fs/nfsd/max_block_size. Chuck Lever converted the server's RPCSEC GSS Kerberos code to the kernel's shared crypto/krb5 library. The conversion retires and removes SunRPC's bespoke implementation of Kerberos v5, but keeps RPCSEC GSS-API. Continuing the xdrgen migration that converted the NLMv4 server XDR layer in v7.1, Chuck Lever converted the NLM version 3 server-side XDR layer from hand-written C to xdrgen-generated code. As with the NLMv4 conversion in v7.1, the goals are improved memory safety, lower maintenance burden, and groundwork for generation of Rust code for this layer instead of C. Chuck Lever fixed an issue where lingering NFSv4 state pins a mounted file system after it is unexported. A new netlink-based mechanism can now release NLM locks and NFSv4 state by client address, by filesystem, and by export. Now an administrator can quiesce an export cleanly before unmounting it. The remaining patches are bug fixes, clean-ups, and minor optimizations, including a batch of memory-leak and use-after-free fixes in the ACL, lockd, and TLS handshake paths, many of them reported by Chris Mason. Sincere thanks to all contributors, reviewers, testers, and bug reporters who participated in the v7.2 NFSD development cycle" * tag 'nfsd-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (106 commits) svcrdma: wake sq waiters when the transport closes nfsd: reset write verifier on deferred writeback errors nfsd: avoid leaking pre-allocated openowner on unconfirmed retry race sunrpc: wait for in-flight TLS handshake callback when cancel loses race sunrpc: pin svc_xprt across the asynchronous TLS handshake callback nfsd: fix posix_acl leak on SETACL decode failure nfsd: fix posix_acl leak and ignored error in nfsd4_create_file nfsd: check get_user() return when reading princhashlen nfsd: fix inverted cp_ttl check in async copy reaper nfsd: fix dead ACL conflict guard in nfsd4_create NFSD: Fix SECINFO_NO_NAME decode error cleanup sunrpc: harden rq_procinfo lifecycle to prevent double-free SUNRPC: Return an error from xdr_buf_to_bvec() on overflow SUNRPC: Bound-check xdr_buf_to_bvec() stores before writing nfsd: release layout stid on setlease failure lockd: Avoid hashing uninitialized bytes in nlm4svc_lookup_file() lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure lockd: Plug nlm_file leak when nlm_do_fopen() fails Revert "NFSD: Defer sub-object cleanup in export put callbacks" Revert "svcrdma: Use contiguous pages for RDMA Read sink buffers" ...
2026-06-17Merge tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - xe: add initial CRI platform support - amdgpu: initial HDMI 2.1 FRL support - rust: add some new type concepts for device lifetimes - scheduler: moves to a fair algorithm and lots of cleanups But it's mostly the usual mountain of changes across the board. core: - add docbook for DRM_IOCTL_SYNCOBJ_EVENTFD - change signature of drm_connector_attach_hdr_output_metadata_property - dedup counter and timestamp retrieval in vblank code - parse AMD VSDB v3 in CTA extension blocks - add P230, Y7, XYYY2101010, T430, XVUY210101010 formats - don't call drop master on file close if not master - use drm_printf_indent in atomic / bridge - fix 32b format descriptions - docs: fix toctree - hdmi: add common TMDS character rates - fix drm_syncobj_find_fence leak rust: - introduce Higher-Ranked lifetime types - replace drvdata with scoped registration data - add GPUVM immediate mode abstraction for rust GPU drivers - introduce DeviceContext type state for drm::Device bridge: - clarify drm_bridge_get/put - create drm_get_bridge_by_endpoint and use it - analogix_dp: add panel probing - ite-it6211 - use drm audio hdmi helpers buddy: - add lockdep annotations dp: - add PR and VRR updates - mst: fix buffer overflows - add Adaptive Sync SDP decoding support - fix OOB reads in dp-mst ttm: - bump fpfn/lpfn to 64-bit scheduler: - change default to fair scheduler - map runqueue 1:1 with scheduler dma-buf: - port selftests to kunit - convert dma-buf system/heap allocators to module - add separate DMABUF_HEAPS_SYSTEM_CC_SHARED Kconfig udmabuf: - revert hugetlb support - fix error with CONFIG_DMA_API_DEBUG dma-fence: - fix tracepoints lifetime - remove unused signal on any support ras: - add clear error counter netlink command to drm ras gpusvm: - reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges - use IOVA allocations pagemap: - use IOVA allocations panels: - update to use ref counts - add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1 - add support for waveshare panels - CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5, - IVO, R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F, - AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels - Surface Pro 12 Panel xe: - add CRI PCI-IDs - debugfs add multi-lrc info - engine init cleanup - PF fair scheduling auto provisioning - system controller support for CRI/Xe3p - PXP state machine fixes - Reset/wedge/unload corner case fixes - Wedge path memory allocation fixes - PAT type cleanups - Reject unsafe PAT for CPU cached memory - OA improvements for CRI device memory - kernel doc syntax in xe headers - xe_drm.h documentation fixes - include guard cleanups - VF CCS memory pool - i915/xe step unification - Xe3p GT tuning fixes - forcewake cleanup in GT and GuC - admin-only PF mode - enable hwmon energy attributes for CRI - enable GT_MI_USER_INTERRUPT - refactor emit functions - oa workarounds - multi_queue: allow QUEUE_TIMESTAMP register - convert stolen memory to ttm range manager - use xe2 style blitter as a feature flag - make drm_driver const - add/use IRQ page to HW engine definition - fix oops when display disabled i915: - enable PIPEDMC_ERROR interrupt - more common display code refactoring - restructure DP/HDMI sink format handling - eliminate FB usage from lowlevel pinning code - panel replay bw optimization - integrate sharpness filter into the scaler - new fb_pin abstraction for xe/i915 fb transparent handling - skip inactive MST connectors on HDCP - start switching to display specific registers - use polling when irq unavailable - Adaptive-sync SDP prep amdgpu: - use drm_display_info for AMD VSDB data - Initial HDMI 2.1 FRL support - Initial DCN 4.2.1 support - GART fixes for non-4k pages - GC 11.5.6/SDMA 6.4.0/and other new IPs - GFX9/DCE6/Hawaii/SDMA4/GART/Userq fixes - Finish support for using multiple SDMA queues for TTM operations - SWSMU updates - GC 12.1 updates - SMU 15.0.8 updates - DCN 4.2 updates - DC type conversion fixes - Enable DC power module - Replay/PSR updates - SMU 13.x updates - Compute queue quantum MQD updates - ASPM fix - Align VKMS with common implementation - DC analog support fixes - UVD 3 fixes - TCC harvesting fixes for SI - GC 11 APU module reload fix - NBIO 6.3.2 support - IH 7.1 updates - DC cursor fixes - VCN/JPEG user fence fixes - DC support for connectors without DDC - Prefer ROM BAR for default VGA device - DC bandwidth fixes - Add PTL support for profiler - Introduce dc_plane_cm and migrate surface update color path - Add FRL registers for HDMI 2.1 - Restructure VM state machine - Auxless ALPM support - GEM_OP locking/warning fixes - switch to system_dfl_wq amdkfd: - GPUVM TLB flush fix - Hotplug fix - Boundary check fixes - SVM fixes - CRIU fixes - add profiler API - MES 12.1 updates msm: - core: - fix shrinker documentation - IFPC enabled for gen8 - PERFCNTR_CONFIG ioctl support - GPU: - reworked UBWC handling - a810 support - MDSS: - add support for Milos platform - reworked UBWC handling - DisplayPort: - reworked HPD handling as prep for MST - DPU: - Milos platform support - reworked UBWC handling - DSI: - Milos platform support nova: - Hopper/Blackwell enablement (GH100/GB100/GB202) - FSP support - 32-bit firmware support - HAL functions - refactor GSP boot/unload - GA100 support - VBIOS hardening/refactoring - Adopt higher order lifetime types tyr: - define register blocks - add shmem backed GEM objects - adopt higher order lifetime types - move clock cleanup into Drop radeon: - Hawaii SMU fixes - CS parser fix - use struct drm_edid instead of edid amdxdna: - export per-client BO memory via fdinfo - AIE4 device support - support medium/lower power modes - expandable device heap support - revert read-only user-pointer BO mappings ivpu: - support frequency limiting panthor: - enable GEM shrinker support - add eviction and reclaim info to fdinfo v3d: - enable runtime PM mgag200: - support XRGB1555 + C8 ast: - support XRGB1555 + C8 - use constants for lots of registers - fix register handling imagination: - fence handling refactoring nouveau: - fix sched double call - expose VBIOS on GSP-RM systems - add GA100 support virtio: - add VIRTIO_GPU_F_BLOB_ALIGNMENT flag - add deferred mapping support gud: - add RCade Display Adapter hibmc: - fix no connectors usage mediatek: - hdmi: convert error handling - simplify mtk_crtc allocation exynos: - move fbdev emulation to drm client buffers - use drm format helpers for geometry/size - adopt core DMA tracking - fix framebuffer offset handling renesas: - add RZ/T2H SOC support versilicon: - add cursor plane support tegra: - use drm client for framebuffer" * tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel: (1731 commits) dma-buf: move system_cc_shared heap under separate Kconfig accel/amdxdna: Clear sva pointer after unbind agp/amd64: Fix broken error propagation in agp_amd64_probe() accel/amdxdna: Require carveout when PASID and force_iova are disabled drm/amdkfd: always resume_all after suspend_all drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini drm/amd/display: Consult MCCS FreeSync cap only if requested & supported drm/amd/pm: Use strscpy in profile mode parsing drm/amdkfd: Fix infinite loop parsing CRAT with zero subtype length drm/amdkfd: fix sysfs topology prop length on buffer truncation drm/amdgpu: drop retry loop in amdgpu_hmm_range_get_pages drm/amd/pm: bound OD parameter parsing to stack array size drm/amd/pm: Stop pp_od_clk_voltage emit at PAGE_SIZE drm/amdkfd: Unwind debug trap enable on copy_to_user failure drm/amdgpu: validate the mes firmware version for gfx12.1 drm/amdgpu: validate the mes firmware version for gfx12 drm/amdgpu: compare MES firmware version ucode for gfx11 drm/amdkfd: Add bounds check for AMDKFD_IOC_WAIT_EVENTS drm/amdgpu: restart the CS if some parts of the VM are still invalidated drm/amd/display: use unsigned types for local pipe and REG_GET counters ...
2026-06-15netdev: expose io_uring rx_page_order order via netlinkDragos Tatulea
This adds observability for the io_uring zcrx rx-buf-len configuration. Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Yael Chemla <ychemla@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://patch.msgid.link/20260612211709.1456966-3-dtatulea@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-13devlink: Implement devlink param multi attribute nested data valuesSaeed Mahameed
Devlink param value attribute is not defined since devlink is handling the value validating and parsing internally, this allows us to implement multi attribute values without breaking any policies. Devlink param multi-attribute values are considered to be dynamically sized arrays of u64 values, by introducing a new devlink param type DEVLINK_PARAM_TYPE_U64_ARRAY, driver and user space can set a variable count of u64 values into the DEVLINK_ATTR_PARAM_VALUE_DATA attribute. Implement get/set parsing and add to the internal value structure passed to drivers. This is useful for devices that need to configure a list of values for a specific configuration. example: $ devlink dev param show pci/... name multi-value-param name multi-value-param type driver-specific values: cmode permanent value: 0,1,2,3,4,5,6,7 $ devlink dev param set pci/... name multi-value-param \ value 4,5,6,7,0,1,2,3 cmode permanent Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Link: https://patch.msgid.link/20260609040453.711932-5-rkannoth@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-13dpll: add generic DPLL typeGrzegorz Nitka
Add DPLL_TYPE_GENERIC to represent DPLL devices which do not fit the existing PPS or EEC classes. The UAPI type is intentionally generic. During netdev discussion, maintainers pointed out that introducing identifiers tied to a specific placement or single design does not scale across ASICs and vendors. The role of a DPLL is already inferable from the spawning driver, bus device, and pin topology, without encoding additional purpose-specific taxonomy in the type name. Using a generic type keeps the UAPI extensible and avoids premature naming that may become incorrect as new hardware topologies are exposed through the DPLL subsystem. Expose the new type through UAPI and netlink specification as "generic". Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Link: https://patch.msgid.link/20260607183045.1213735-2-grzegorz.nitka@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-12psp: add a new netdev event for dev unregisterWei Wang
Add a new netdev event for dev unregister and handle the removal of this dev from psp->assoc_dev_list, upon the first dev-assoc operation. Signed-off-by: Wei Wang <weibunny@fb.com> Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20260608233118.2694144-4-weibunny.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-12psp: add new netlink cmd for dev-assoc and dev-disassocWei Wang
The main purpose of this cmd is to be able to associate a non-psp-capable device (e.g. veth or netkit) with a psp device. One use case is if we create a pair of veth/netkit, and assign 1 end inside a netns, while leaving the other end within the default netns, with a real PSP device, e.g. netdevsim or a physical PSP-capable NIC. With this command, we could associate the veth/netkit inside the netns with PSP device, so the virtual device could act as PSP-capable device to initiate PSP connections, and performs PSP encryption/decryption on the real PSP device. Signed-off-by: Wei Wang <weibunny@fb.com> Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20260608233118.2694144-3-weibunny.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-12psp: add admin/non-admin version of psp_device_get_lockedWei Wang
Introduce 2 versions of psp_device_get_locked: 1. psp_device_get_locked_admin(): This version is used for operations that would change the status of the psd, and are currently used for dev-set and key-rotation. 2. psp_device_get_locked(): This is the non-admin version, which are used for broader user issued operations including: dev-get, rx-assoc, tx-assoc, get-stats. Following commit will be implementing both of the checks. Signed-off-by: Wei Wang <weibunny@fb.com> Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20260608233118.2694144-2-weibunny.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-12handshake: Require admin permission for DONE commandChuck Lever
ACCEPT and DONE are the two downcalls of the handshake genl family, both intended for use by the trusted handshake agent (tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has no privilege check at all. The fd-lookup in handshake_nl_done_doit() only confirms that some pending handshake request exists for the supplied sockfd; it does not authenticate the sender. An unprivileged process that guesses or observes a valid sockfd can therefore submit a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel consumer to proceed as if the handshake succeeded. A non-zero status on a forged DONE tears down a legitimate in-flight handshake before tlshd can report its real result. Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Hannes Reinecke <hare@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20260609141831.90694-1-cel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-10bonding: 3ad: add lacp_strict configuration knobLouis Scalbert
When an 802.3ad (LACP) bonding interface has no slaves in the collecting/distributing state, the bonding master still reports carrier as up as long as at least 'min_links' slaves have carrier. In this situation, only one slave is effectively used for TX/RX, while traffic received on other slaves is dropped. Upper-layer daemons therefore consider the interface operational, even though traffic may be blackholed if the lack of LACP negotiation means the partner is not ready to deal with traffic. Introduce a configuration knob to control this behavior. It allows the bonding master to assert carrier only when at least 'min_links' slaves are in Collecting_Distributing state. The default mode preserves the existing behavior. This patch only introduces the knob; its behavior is implemented in the subsequent commit. Fixes: 655f8919d549 ("bonding: add min links parameter to 802.3ad") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20260603150331.1919611-4-louis.scalbert@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-10netlink: specs: rt-link: missed broadcast-neighLouis Scalbert
Add missed broadcast-neigh. Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20260603150331.1919611-3-louis.scalbert@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-09NFSD: Add NFSD_CMD_UNLOCK_EXPORT netlink commandChuck Lever
When a filesystem is exported to NFS clients, NFSv4 state (opens, locks, delegations, layouts) holds references that prevent the underlying filesystem from being unmounted. NFSD_CMD_UNLOCK_FILESYSTEM addresses this at superblock granularity, but administrators unexporting a single path on a shared filesystem (e.g., one of several exports on the same device) need finer control. Add NFSD_CMD_UNLOCK_EXPORT, which revokes NFSv4 state acquired through exports of a specific path. Matching is by path identity (dentry + vfsmount) via the sc_export field on each nfs4_stid, so multiple svc_export objects for the same path -- one per auth_domain -- are handled correctly without requiring the caller to name a specific client. The command takes a single "path" attribute. Userspace (exportfs -u) sends this after removing the last client for a given path, enabling the underlying filesystem to be unmounted. When multiple clients share an export path, individual unexports do not trigger state revocation; only the final one does. Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-06-09NFSD: Add NFSD_CMD_UNLOCK_FILESYSTEM netlink commandChuck Lever
Add NFSD_CMD_UNLOCK_FILESYSTEM as a dedicated netlink command for revoking NFS state under a filesystem path, providing a netlink equivalent of /proc/fs/nfsd/unlock_fs. The command requires a "path" string attribute containing the filesystem path whose state should be released. The handler resolves the path to its superblock, then cancels async copies, releases NLM locks, and revokes NFSv4 state on that superblock. Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-06-09NFSD: Add NFSD_CMD_UNLOCK_IP netlink commandChuck Lever
The existing write_unlock_ip procfs interface releases NLM file locks held by a specific client IP address, but procfs provides no structured way to extend that operation to other scopes such as revoking NFSv4 state. Add NFSD_CMD_UNLOCK_IP as a dedicated netlink command for releasing NLM locks by client address. The command accepts a binary sockaddr_in or sockaddr_in6 in its address attribute. The handler validates the address family and length, then calls nlmsvc_unlock_all_by_ip() to release matching NLM locks. Because lockd is a single global instance, that call operates across all network namespaces regardless of which namespace the caller inhabits. A separate netlink command for filesystem-scoped unlock is added in a subsequent commit. The nfsd_ctl_unlock_ip tracepoint is updated from string-based address logging to __sockaddr, which stores the binary sockaddr and formats it with %pISpc. This affects both the new netlink path and the existing procfs write_unlock_ip path, giving consistent structured output in both cases. Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-06-05net: devmem: allow bind-rx from non-init user namespacesBobby Eshleman
NETDEV_CMD_BIND_RX is currently GENL_ADMIN_PERM, which checks CAP_NET_ADMIN against init userns. With recent container/netkit/ns support for devmem, other userns/netns use cases come online and require bind-rx to allow CAP_NET_ADMIN in non-init user ns as well. Switch the flag to GENL_UNS_ADMIN_PERM to allow bind-rx for CAP_NET_ADMIN in the netns's owning userns as well. Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20260602-nl-prov-v2-1-ad721142c641@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-03geneve: Introduce IFLA_GENEVE_LOCAL and IFLA_GENEVE_LOCAL6.Kuniyuki Iwashima
By default, a GENEVE device bind()s its underlying UDP socket(s) to the IPv4 or IPv6 wildcard address because there is no way to specify a specific local IP address to bind() to. This prevents deploying multiple GENEVE devices on a multi-homed host where each device should be isolated and bound to a different local IP address on the same UDP port. Let's introduce new options, IFLA_GENEVE_LOCAL and IFLA_GENEVE_LOCAL6, to allow specifying a local IPv4/IPv6 address for the backend UDP socket. By default, when collect metadata mode (IFLA_GENEVE_COLLECT_METADATA) is enabled, both IPv4 and IPv6 sockets are created. However, if a source address is specified via the new attributes, only a single socket corresponding to that specific address family is created. Accordingly, geneve_find_sock() and geneve_find_dev() are updated to take the source address into account, ensuring that multiple devices and sockets configured with different source addresses can coexist without conflict. In addition, the source address is validated in geneve_xmit_skb() and geneve6_xmit_skb(), so the BPF prog must set it in bpf_tunnel_key. With this change, multiple GENEVE devices can be successfully created and bound to their respective local IP addresses: (*) "local" is the keyword for IFLA_GENEVE_LOCAL / IFLA_GENEVE_LOCAL6 # for i in $(seq 1 2); do ip link add geneve4_${i} type geneve local 192.168.0.${i} external ip addr add 192.168.0.${i}/24 dev geneve4_${i} ip link set geneve4_${i} up ip link add geneve6_${i} type geneve local 2001:9292::${i} external ip addr add 2001:9292::${i}/64 dev geneve6_${i} nodad ip link set geneve6_${i} up done # ip -d l | grep geneve 9: geneve4_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ... geneve external id 0 local 192.168.0.1 ... 10: geneve6_1: <BROADCAST,MULTICAST,UP,LOWER_UP> ... geneve external id 0 local 2001:9292::1 ... 11: geneve4_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ... geneve external id 0 local 192.168.0.2 ... 12: geneve6_2: <BROADCAST,MULTICAST,UP,LOWER_UP> ... geneve external id 0 local 2001:9292::2 ... # ss -ua | grep geneve UNCONN 0 0 192.168.0.2:geneve 0.0.0.0:* UNCONN 0 0 192.168.0.1:geneve 0.0.0.0:* UNCONN 0 0 [2001:9292::2]:geneve *:* UNCONN 0 0 [2001:9292::1]:geneve *:* Note that even if the local address is explicitly configured with the wildcard address, kernel does not dump it except for devices with IFLA_GENEVE_COLLECT_METADATA. This is consistent with the behaviour of is_tnl_info_zero(), which treats the wildcard remote address as not configured. ## ynl example. # ./tools/net/ynl/pyynl/cli.py \ --spec ./Documentation/netlink/specs/rt-link.yaml \ --do newlink --create \ --json '{"ifname": "geneve0", "linkinfo": {"kind":"geneve", "data": {"local": "0.0.0.0", "collect-metadata": true}}}' # ./tools/net/ynl/pyynl/cli.py \ --spec ./Documentation/netlink/specs/rt-link.yaml \ --do getlink \ --json '{"ifname": "geneve0"}' --output-json | \ jq .linkinfo.data.local "0.0.0.0" Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260602190436.139591-6-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-02doc/netlink: rt-link: fix binary attributes marked as stringsRemy D. Farley
These link-attrs attributes were previously marked as strings: - wireless - struct iw_event - protinfo - a nest of ifla6-attrs or linkinfo-brport-attrs - cost, priority - unused Signed-off-by: Remy D. Farley <one-d-wide@protonmail.com> Link: https://patch.msgid.link/20260529121355.1564817-1-one-d-wide@protonmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-01NFSD: Put cache get-reqs dump attrs under replyChuck Lever
The new get-reqs dump operations added to sunrpc_cache.yaml and nfsd.yaml place the "requests" nested attribute under dump.request. A netlink dump carries an empty request; its payload travels back in the reply. Because the spec names no reply attributes, the YNL C code generator synthesizes a forward reference to a <op>_rsp struct that is never defined, breaking any consumer of these specs. This first surfaced when Thorsten Leemhuis built tools/net/ynl against -next: nfsd-user.h:746: error: field 'obj' has incomplete type struct nfsd_svc_export_get_reqs_rsp obj ... nfsd-user.h:826: error: field 'obj' has incomplete type struct nfsd_expkey_get_reqs_rsp obj ... nfsd-user.c:1211: error: 'nfsd_svc_export_get_reqs_rsp_parse' undeclared sunrpc_cache.yaml has the same defect in ip-map-get-reqs and unix-gid-get-reqs, but nfsd.yaml errors out first in the Makefile's alphabetical build order and hides the sunrpc failures. These bugs were introduced by incorrect merge conflict resolution. Reported-by: Thorsten Leemhuis <linux@leemhuis.info> Closes: https://lore.kernel.org/linux-nfs/f6a3ca6d-e5cb-4a5c-9af2-8d2b1ce33ef0@leemhuis.info/ Fixes: 1045ccf519ce30 ("sunrpc: add netlink upcall for the auth.unix.ip cache") Tested-by: Thorsten Leemhuis <linux@leemhuis.info> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-06-01nfsd: add NFSD_CMD_CACHE_FLUSH netlink commandJeff Layton
Add a new NFSD_CMD_CACHE_FLUSH generic netlink command that allows userspace to flush the nfsd export caches (svc_export and expkey) without writing to /proc/net/rpc/*/flush. An optional NFSD_A_CACHE_FLUSH_MASK u32 attribute selects which caches to flush (bit 1 = svc_export, bit 2 = expkey). If the attribute is omitted, all nfsd caches are flushed. This is used by exportfs to replace its /proc-based cache_flush() with a netlink equivalent, with /proc fallback for older kernels. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-06-01sunrpc: add SUNRPC_CMD_CACHE_FLUSH netlink commandJeff Layton
Add a new SUNRPC_CMD_CACHE_FLUSH generic netlink command that allows userspace to flush the sunrpc auth caches (ip_map and unix_gid) without writing to /proc/net/rpc/*/flush. An optional SUNRPC_A_CACHE_FLUSH_MASK u32 attribute selects which caches to flush (bit 1 = ip_map, bit 2 = unix_gid). If the attribute is omitted, all sunrpc caches are flushed. This is used by exportfs to replace its /proc-based cache_flush() with a netlink equivalent, with /proc fallback for older kernels. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-06-01nfsd: add netlink upcall for the nfsd.fh cacheJeff Layton
Add netlink-based cache upcall support for the expkey (nfsd.fh) cache, following the same pattern as the existing svc_export netlink support. Add expkey to the cache-type enum, a new expkey attribute-set with client, fsidtype, fsid, negative, expiry, and path fields, and the expkey-get-reqs / expkey-set-reqs operations to the nfsd YAML spec and generated headers. Implement nfsd_nl_expkey_get_reqs_dumpit() which snapshots pending expkey cache requests and sends each entry's seqno, client name, fsidtype, and fsid over netlink. Implement nfsd_nl_expkey_set_reqs_doit() which parses expkey cache responses from userspace (client, fsidtype, fsid, expiry, and path or negative flag) and updates the cache via svc_expkey_lookup() / svc_expkey_update(). Wire up the expkey_notify() callback in svc_expkey_cache_template so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with NFSD_CACHE_TYPE_EXPKEY. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-06-01nfsd: add netlink upcall for the svc_export cacheJeff Layton
Add netlink-based cache upcall support for the svc_export (nfsd.export) cache to Documentation/netlink/specs/nfsd.yaml and regenerate the resulting files. Implement nfsd_cache_notify() which sends a NFSD_CMD_CACHE_NOTIFY multicast event to the "exportd" group, carrying the cache type so userspace knows which cache has pending requests. Implement nfsd_nl_svc_export_get_reqs_dumpit() which snapshots pending svc_export cache requests and sends each entry's seqno, client name, and path over netlink. Implement nfsd_nl_svc_export_set_reqs_doit() which parses svc_export cache responses from userspace (client, path, expiry, flags, anon uid/gid, fslocations, uuid, secinfo, xprtsec, fsid, or negative flag) and updates the cache via svc_export_lookup() / svc_export_update(). Wire up the svc_export_notify() callback in svc_export_cache_template so cache misses trigger NFSD_CMD_CACHE_NOTIFY multicast events with NFSD_CACHE_TYPE_SVC_EXPORT. Note that the export-flags and xprtsec-mode enums are organized to match their counterparts in include/uapi/linux/nfsd/export.h. The intent is that future export options will only be added to the netlink headers, which should eliminate the need to keep so much in sync. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-06-01sunrpc: add netlink upcall for the auth.unix.gid cacheJeff Layton
Add netlink-based cache upcall support for the unix_gid (auth.unix.gid) cache, using the sunrpc generic netlink family. Add unix-gid attribute-set (seqno, uid, gids multi-attr, negative, expiry), unix-gid-reqs wrapper, and unix-gid-get-reqs / unix-gid-set-reqs operations to the sunrpc_cache YAML spec and generated headers. Implement sunrpc_nl_unix_gid_get_reqs_dumpit() which snapshots pending unix_gid cache requests and sends each entry's seqno and uid over netlink. Implement sunrpc_nl_unix_gid_set_reqs_doit() which parses unix_gid cache responses from userspace (uid, expiry, gids as u32 multi-attr or negative flag) and updates the cache via unix_gid_lookup() / sunrpc_cache_update(). Wire up unix_gid_notify() callback in unix_gid_cache_template so cache misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with SUNRPC_CACHE_TYPE_UNIX_GID. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-06-01sunrpc: add netlink upcall for the auth.unix.ip cacheJeff Layton
Add netlink-based cache upcall support for the ip_map (auth.unix.ip) cache, using the sunrpc generic netlink family. Add ip-map attribute-set (seqno, class, addr, domain, negative, expiry), ip-map-reqs wrapper, and ip-map-get-reqs / ip-map-set-reqs operations to the sunrpc_cache YAML spec and generated headers. Implement sunrpc_nl_ip_map_get_reqs_dumpit() which snapshots pending ip_map cache requests and sends each entry's seqno, class name, and IP address over netlink. Implement sunrpc_nl_ip_map_set_reqs_doit() which parses ip_map cache responses from userspace (class, addr, expiry, and domain name or negative flag) and updates the cache via __ip_map_lookup() / __ip_map_update(). Wire up ip_map_notify() callback in ip_map_cache_template so cache misses trigger SUNRPC_CMD_CACHE_NOTIFY multicast events with SUNRPC_CACHE_TYPE_IP_MAP. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-06-01sunrpc: add a generic netlink family for cache upcallsJeff Layton
The auth.unix.ip and auth.unix.gid caches live in the sunrpc module, so they cannot use the nfsd generic netlink family. Create a new "sunrpc" generic netlink family with its own "exportd" multicast group to support cache upcall notifications for sunrpc-resident caches. Define a YAML spec (sunrpc_cache.yaml) with a cache-type enum (ip_map, unix_gid), a cache-notify multicast event, and the corresponding uapi header. Implement sunrpc_cache_notify() in cache.c, which checks for listeners on the exportd multicast group, builds and sends a SUNRPC_CMD_CACHE_NOTIFY message with the cache-type attribute. Register/unregister the sunrpc_nl_family in init_sunrpc() and cleanup_sunrpc(). Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2026-05-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-7.1-rc6). Conflicts: drivers/net/phy/air_en8811h.c d895767c33781 ("net: phy: air_en8811h: add AN8811HB MCU assert/deassert support") dddfadd75197e ("net: phy: Add Airoha phy library for shared code") 5226bb6634cdf ("net: phy: air_phy_lib: Factorize BuckPBus register accessors") e08f0ea6daf2e ("net: phy: Rename Airoha common BuckPBus register accessors") net/sched/sch_netem.c a2f6ed7b4873 ("net/sched: netem: add per-impairment extended statistics") 9552b11e3eda ("net/sched: fix packet loop on netem when duplicate is on") Adjacent changes: drivers/dpll/zl3073x/core.c c1224569cef0 ("dpll: zl3073x: make frequency monitor a per-device attribute") 54e65df8cf18 ("dpll: zl3073x: report FFO as DPLL vs input reference offset") net/iucv/af_iucv.c 347fdd4df85f ("af_iucv: convert to getsockopt_iter") 3589d20a666c ("net/iucv: fix locking in .getsockopt") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-28net/handshake: Pass negative errno through handshake_complete()Chuck Lever
handshake_complete() declares status as unsigned int and tls_handshake_done() negates that value (-status) before handing it to the TLS consumer. Consumers match on negative errno constants -- xs_tls_handshake_done() has switch (status) { case 0: case -EACCES: case -ETIMEDOUT: lower_transport->xprt_err = status; break; default: lower_transport->xprt_err = -EACCES; } so the API as designed expects callers to pass positive errno values that the tlshd shim then negates. Three internal callers in handshake_nl_accept_doit(), the net-exit drain, and a kunit test follow kernel convention and pass negative errnos -- -EIO, -ETIMEDOUT, -ETIMEDOUT. The implicit conversion to unsigned int turns -ETIMEDOUT into 0xFFFFFF92; the subsequent -status in tls_handshake_done() wraps back to 110, the consumer's switch falls through, and the xprt reports -EACCES on what should be -ETIMEDOUT or -EIO. Fix the API rather than the call sites. The natural kernel convention is negative errno in, negative errno out. Change handshake_complete() and hp_done to take int status, drop the negation in tls_handshake_done(), and negate once in handshake_nl_done_doit() where status arrives from the wire as an unsigned netlink attribute. The three internal callers were already correct under that convention and need no change. At the same wire boundary, declare MAX_ERRNO as the netlink policy upper bound for HANDSHAKE_A_DONE_STATUS. Attribute validation rejects out-of-range values before handshake_nl_done_doit() runs, and negating a bounded u32 there stays within int range -- closing the UBSAN-visible signed- integer overflow that an unconstrained u32 would invoke. Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Hannes Reinecke <hare@kernel.org> Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-3-66c616906ead@oracle.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-05-28Merge v7.1-rc5 into drm-nextSimona Vetter
Boris Brezillion needs the gem lru fixes 379e8f1ca5e9 ("drm/gem: Make the GEM LRU lock part of drm_device") backmerged for drm-misc-next. That also means we need to sort out the rename conflict in panthor with the fixup patch from Boris from drm-tip. Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
2026-05-26netlink: specs: add OVS packet family specificationMinxi Hou
Add YAML netlink spec for the OVS_PACKET_FAMILY (ovs_packet). This completes the set of OVS genetlink family specs (ovs_datapath, ovs_flow, ovs_vport already exist). The spec defines three operations: MISS (event), ACTION (event), and EXECUTE (do). MISS and ACTION are kernel-to-userspace upcalls sent via genlmsg_unicast(); EXECUTE is the only registered genl operation. Key, actions, and egress-tun-key attributes are typed as binary rather than nest because the nested attribute definitions belong to the ovs_flow spec and cross-spec references are not supported by the YNL framework. Signed-off-by: Minxi Hou <houminxi@gmail.com> Link: https://patch.msgid.link/20260522174154.720293-2-houminxi@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-7.1-rc4). No conflicts, or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-14bridge: uapi: Add neigh_forward_grat netlink attributesDanielle Ratson
Add netlink attributes for controlling gratuitous ARP and unsolicited NA forwarding when neighbor suppression is enabled. Add IFLA_BRPORT_NEIGH_FORWARD_GRAT for port-level control and BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT for per-VLAN control. The new attributes provide independent control of gratuitous ARP and unsolicited NA packets. Operators can enable forwarding for those packets for fast mobility across VTEPs while keeping general neighbor suppression active. Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Danielle Ratson <danieller@nvidia.com> Link: https://patch.msgid.link/20260511065936.4173106-2-danieller@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-05-12dpll: add fractional frequency offset to pin-parent-deviceIvan Vecera
Add both fractional-frequency-offset (PPM) and fractional-frequency-offset-ppt (PPT) attributes to the pin-parent-device nested attribute set, alongside the existing top-level pin attributes. Both carry the same measurement at different precisions. Introduce enum dpll_ffo_type and struct dpll_ffo_param to distinguish FFO contexts: DPLL_FFO_PORT_RXTX_RATE for the RX vs TX symbol rate offset reported at the top level, and DPLL_FFO_PIN_DEVICE for the pin vs parent DPLL offset reported in the pin-parent-device nest. Add a supported_ffo bitmask to struct dpll_pin_ops so drivers declare which FFO types they support. The core only calls ffo_get for types the driver has opted into, eliminating the need for per-driver NULL pointer guards. Validate at pin registration time that supported_ffo is not set without an ffo_get callback. Update mlx5 (DPLL_FFO_PORT_RXTX_RATE) and zl3073x (DPLL_FFO_PORT_RXTX_RATE) drivers to use the new API. Add documentation for both FFO types to dpll.rst. Changes v3 -> v4: - Replace dpll=NULL overloading with enum dpll_ffo_type and struct dpll_ffo_param (Jakub Kicinski) - Add supported_ffo opt-in bitmask in dpll_pin_ops for fail-close driver validation (Jakub Kicinski) - Add WARN_ON in dpll_pin_register for supported_ffo without ffo_get callback Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Link: https://patch.msgid.link/20260511155816.99936-2-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-12net: shaper: reject handle IDs exceeding internal bit-widthJakub Kicinski
net_shaper_parse_handle() reads the user-supplied handle ID via nla_get_u32(), accepting the full u32 range. However, the xarray key is built by net_shaper_handle_to_index() using FIELD_PREP(NET_SHAPER_ID_MASK, handle->id), where NET_SHAPER_ID_MASK is GENMASK(25, 0) - only 26 bits wide. FIELD_PREP silently masks off the upper bits at runtime. A user-supplied NODE id like 0x04000123 becomes id 0x123. Additionally, a user-supplied id equal to NET_SHAPER_ID_UNSPEC (0x03FFFFFF, which is NET_SHAPER_ID_MASK itself) would collide with the sentinel used internally by the group operation to signal "allocate a new NODE id". Reject user-supplied IDs >= NET_SHAPER_ID_MASK (i.e., >= 0x03FFFFFF) in the policy. Fixes: 4b623f9f0f59 ("net-shapers: implement NL get operation") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20260510192904.3987113-9-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-05-12tools: ynl: add scope qualifier for definitionsJakub Kicinski
Using definitions in kernel policies is awkward right now. On one hand we want defines for max values and such. On the other we don't have a way of adding kernel-only defines. Adding unnecessary defines to uAPI is a bad idea, we won't be able to delete them. And when it comes to policy user space should just query it via the policy dump, not use hard coded defines. Add a "scope" property to definitions, which will let us tell the codegen that a definition is for kernel use only. Support following values: - uapi: render into the uAPI header (default, today's behavior) - kernel: render to kernel header only - user: same as kernel but for the user-side generated header Definitions may have a header property (definition is "external", provided by existing header). Extend the scope to headers, too. If definition has both scope and header properties we will only generate the includes in the right scope. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20260510192904.3987113-8-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-05-08net: page_pool: support dumping pps of a specific ifindex via NetlinkJakub Kicinski
NIPA tries to make sure that HW tests don't modify system state. It saves the state of page pools, too. Now that I write this commit message I realize that this is impractical since page pool IDs and state will get legitimately changed by the tests. But I already spent a couple of hours implementing the filtering, so.. Link: https://patch.msgid.link/20260506034821.1710113-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-04Merge tag 'drm-xe-next-2026-04-30' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - Debugfs multi-LRC engine info (Xin Wang, 2 commits) Expose multi-LRC engine classes in the debugfs engine info output and improve the output readability. - drm/drm_ras: Add clear-error-counter netlink command to drm_ras Cross-subsystem Changes: Core Changes: - drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges - drm/i915/display: switch to including common step file directly Driver Changes: - Engine initialization cleanup (Matt Roper, 10 commits) Clean up engine initialization code inherited from i915 by moving hardware programming (CCS enablement, HWSTAM, GFX_MODE, BLIT_CCTL, STOP_RING) into the RTP infrastructure. This makes the programming visible and verifiable via debugfs, and applies consistently across both normal and execlist init paths. Also fixes the name/definition of GFX_MODE, marks BCS engines as belonging to the GT forcewake domain, and drops the now-unused xe_hw_engine_mmio_write32() helper. - PF fair scheduling auto-provisioning (Michal Wajdeczko, 13 commits) Fix several corner cases in SR-IOV PF scheduling policy provisioning, then auto-provision PF and all VFs with 16ms execution-quantum and preemption-timeout defaults. This prevents a VF from monopolizing the GPU by submitting workloads without gaps, without requiring the user to configure sysfs manually. - System Controller support for CRI/Xe3p (Anoop Vijay + Raag Jadav, 10 commits) Add xe_sysctrl infrastructure for communicating with the System Controller firmware entity on CRI/Xe3p discrete GPU platforms via a mailbox interface. Includes type definitions, register definitions, mailbox communication, initialization, power management, interrupt handling, and event dispatch. Builds on this to add initial RAS correctable error handling, using sysctrl interrupts to receive threshold-crossed events. - PXP state machine fixes (Daniele Ceraolo Spurio, 4 commits) Fix PXP state machine handling: reject PXP sessions on PTL platforms with older GSC firmware that does not support it, fix the restart flag not being cleared after jumping back in pxp_start, remove incorrect handling of an impossible state during suspend, and clean up termination status on failure. - Reset/wedge/unload corner case fixes (Zhanjun Dong + Matthew Brost, 5 commits) Fix memory leaks and fence signal failures that occurred during GPU reset, device wedging, and driver unload by forcefully tearing down remaining exec queues in GuC submit fini, always killing queues in pause/abort, and triggering queue cleanup when not in wedged mode 2. Also ensures GuC CT state transitions via STOP before DISABLED. - Wedge path memory allocation fixes (Matthew Brost, 3 commits) Avoid GFP_KERNEL allocations in xe_device_declare_wedged(), which runs in the DMA-fence signaling path. Also drops the guc_submit_wedged_fini devm registration from xe_guc_submit_wedge() to clean up the wedge shutdown sequence. - PAT type cleanup and invalid index hardening (Xin Wang, 3 commits) Standardize pat_index fields to u16 across the driver, default XE_CACHE_NONE_COMPRESSION to XE_PAT_INVALID_IDX (matching WB_COMPRESSION), and introduce xe_cache_pat_idx() — a macro helper that validates cache_mode bounds and asserts on invalid PAT indices before returning the index. - Reject unsafe PAT indices for CPU cached memory (Jia Yao, 2 commits) Reject incoherent (coh_none) PAT indices for CPU cached memory in both the madvise ioctl and vm_bind with CPU_ADDR_MIRROR flag, closing a security gap where the GPU could bypass CPU caches and observe stale or sensitive data. - OA improvements for CRI device memory (Ashutosh Dixit, 3 commits) Move OA buffer access to the xe_map layer to support both system and device memory (required for CRI), switch OA buffer mmap to use drm_gem_mmap_obj, and implement workaround Wa_14026633728. - xe_drm.h documentation fixes (Shuicheng Lin, 6 commits) Fix multiple documentation issues in the xe_drm.h UAPI header: typos, spelling errors, grammar, wrong names and references, kernel-doc cross-reference syntax, and broken code examples. - kernel-doc syntax fixes in xe headers (Shuicheng Lin, 4 commits) Fix kernel-doc syntax issues across xe header files: missing '@' prefixes on member tags, stale/mismatched member tags, comment syntax errors, and type/parameter name mismatches in references. - Buffer object and DMA-buf resource leak fixes (Shuicheng Lin, 4 commits) Fix resource leaks on error paths: DMA-buf attachment leak in xe_gem_prime_import(), BO leak in xe_dma_buf_init_obj() on allocation failure, and BO leaks in xe_bo_init_locked() on GGTT flag validation and unaligned size validation failures. - Include guard cleanup (Shuicheng Lin, 5 commits) Fix and standardize include guards across xe header files: normalize double-underscore guards to single, add missing leading/trailing underscores, add missing _H suffixes, and add guards to previously unprotected headers. - VF CCS memory pool (Satyanarayana K V P, 2 commits) Switch VF CCS read/write operations from the DRM sub-allocator to DRM mm, fixing allocation failures in fence-disabled mode where the sub-allocator's hole cursor assumption breaks. Also introduces a general BO-backed memory pool with shadow support using drm_mm. - i915/xe step definition unification (Jani Nikula, 3 commits) Complete the migration to the shared intel_step header: switch xe from its own xe_step enum to the shared intel_step naming and definitions, and update i915 display code to include the common step header directly. - Xe3p GT tuning fixes (3 commits) Three Xe3p GT tuning corrections: fix the register offset for GAMSTLB_CTRL, stop applying the CCCHKNREG1 tuning from Xe3p onward (no longer needed), and mark ROW_CHICKEN5 as a masked register. - Forcewake cleanup in GT and GuC PC (Raag Jadav, 3 commits) Drop a redundant forcewake reference in xe_gt, reorder forcewake usage in xe_guc_pc_fini_hw() to avoid a redundant hold, and convert xe_guc_pc_stop() to void since it can no longer fail. - SVM garbage collector fix on close (Matthew Brost, 2 commits) Disable the SVM garbage collector work item when an SVM is closed to prevent use-after-free when the GC fires after the SVM is freed. - Admin-only PF mode (Satyanarayana K V P, 2 commits) Derive an "admin-only PF" mode flag from xe_device state instead of using a local flag, and restrict device query responses when running in admin-only PF mode to avoid exposing internal state. - Enable hwmon energy attributes and accepted power limit for CRI (2 commits) Enable energy consumption hwmon attributes for the CRI platform and add support for reading the accepted (sustained) power limit via hwmon. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patch.msgid.link/afNSeZJHC3X2m3-N@fedora
2026-04-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-7.1-rc2). No conflicts, or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-30dpll: add pin operational stateIvan Vecera
Add pin-operstate enum and operstate_on_dpll_get callback to report the actual hardware status of a pin with respect to its parent DPLL device. Unlike pin-state (which reflects administrative intent set by the user), operstate reflects what the hardware is actually doing. Defined operational states: - active: pin is qualified and actively used by the DPLL - standby: pin is qualified but not actively used by the DPLL - no-signal: pin does not have a valid signal - qual-failed: pin signal failed qualification The operstate is reported inside the pin-parent-device nested attribute alongside the existing state and phase-offset attributes. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Petr Oros <poros@redhat.com> Link: https://patch.msgid.link/20260428154907.2820654-2-ivecera@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-04-28net: psp: require admin permission for dev-set and key-rotateJakub Kicinski
The dev-set and key-rotate netlink operations modify shared device state (PSP version configuration and cryptographic key material, respectively) but do not require CAP_NET_ADMIN. The only access control is psp_dev_check_access() which merely verifies netns membership. Fixes: 00c94ca2b99e ("psp: base PSP device support") Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260427195856.401223-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-24drm/drm_ras: Add clear-error-counter netlink command to drm_rasRiana Tauro
Introduce a new 'clear-error-counter' drm_ras command to reset the counter value for a specific error counter of a given node. The command is a 'do' netlink request with 'node-id' and 'error-id' as parameters with no response payload. Usage: $ sudo ynl --family drm_ras --do clear-error-counter --json \ '{"node-id":1, "error-id":1}' None Cc: Jakub Kicinski <kuba@kernel.org> Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com> Cc: Lijo Lazar <lijo.lazar@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: David S. Miller <davem@davemloft.net> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Riana Tauro <riana.tauro@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Link: https://patch.msgid.link/20260409073318.2909379-5-riana.tauro@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Maxime Ripard <mripard@redhat.com>
2026-04-20Merge tag 'nfsd-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds
Pull nfsd updates from Chuck Lever: - filehandle signing to defend against filehandle-guessing attacks (Benjamin Coddington) The server now appends a SipHash-2-4 MAC to each filehandle when the new "sign_fh" export option is enabled. NFSD then verifies filehandles received from clients against the expected MAC; mismatches return NFS error STALE - convert the entire NLMv4 server-side XDR layer from hand-written C to xdrgen-generated code, spanning roughly thirty patches (Chuck Lever) XDR functions are generally boilerplate code and are easy to get wrong. The goals of this conversion are improved memory safety, lower maintenance burden, and groundwork for eventual Rust code generation for these functions. - improve pNFS block/SCSI layout robustness with two related changes (Dai Ngo) SCSI persistent reservation fencing is now tracked per client and per device via an xarray, to avoid both redundant preempt operations on devices already fenced and a potential NFSD deadlock when all nfsd threads are waiting for a layout return. - scalability and infrastructure improvements Sincere thanks to all contributors, reviewers, testers, and bug reporters who participated in the v7.1 NFSD development cycle. * tag 'nfsd-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (83 commits) NFSD: Docs: clean up pnfs server timeout docs nfsd: fix comment typo in nfsxdr nfsd: fix comment typo in nfs3xdr NFSD: convert callback RPC program to per-net namespace NFSD: use per-operation statidx for callback procedures svcrdma: Use contiguous pages for RDMA Read sink buffers SUNRPC: Add svc_rqst_page_release() helper SUNRPC: xdr.h: fix all kernel-doc warnings svcrdma: Factor out WR chain linking into helper svcrdma: Add Write chunk WRs to the RPC's Send WR chain svcrdma: Clean up use of rdma->sc_pd->device svcrdma: Clean up use of rdma->sc_pd->device in Receive paths svcrdma: Add fair queuing for Send Queue access SUNRPC: Optimize rq_respages allocation in svc_alloc_arg SUNRPC: Track consumed rq_pages entries svcrdma: preserve rq_next_page in svc_rdma_save_io_pages SUNRPC: Handle NULL entries in svc_rqst_release_pages SUNRPC: Allocate a separate Reply page array SUNRPC: Tighten bounds checking in svc_rqst_replace_page NFSD: Sign filehandles ...
2026-04-15Merge tag 'drm-next-2026-04-15' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - new DRM RAS infrastructure using netlink - amdgpu: enable DC on CIK APUs, and more IP enablement, and more user queue work - xe: purgeable BO support, and new hw enablement - dma-buf : add revocable operations Full summary: mm: - two-pass MMU interval notifiers - add gpu active/reclaim per-node stat counters math: - provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI - implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST() rust: - shared tag with driver-core: register macro and io infra - core: rework DMA coherent API - core: add interop::list to interop with C linked lists - core: add more num::Bounded operations - core: enable generic_arg_infer and add EMSGSIZE - workqueue: add ARef<T> support for work and delayed work - add GPU buddy allocator abstraction - add DRM shmem GEM helper abstraction - allow drm:::Device to dispatch work and delayed work items to driver private data - add dma_resv_lock helper and raw accessors core: - introduce DRM RAS infrastructure over netlink - add connector panel_type property - fourcc: add ARM interleaved 64k modifier - colorop: add destroy helper - suballoc: split into alloc and init helpers - mode: provide DRM_ARGB_GET*() macros for reading color components edid: - provide drm_output_color_Format dma-buf: - provide revoke mechanism for shared buffers - rename move_notify to invalidate_mappings - always enable move_notify - protect dma_fence_ops with RCU and improve locking - clean pages with helpers atomic: - allocate drm_private_state via callback - helper: use system_percpu_wq buddy: - make buddy allocator available to gpu level - add kernel-doc for buddy allocator - improve aligned allocation ttm: - fix fence signalling - improve tests and docs - improve handling of gfp_retry_mayfail - use per-node stat counters to track memory allocations - port pool to use list_lru - drop NUMA specific pools - make pool shrinker numa aware - track allocated pages per numa node coreboot: - cleanup coreboot framebuffer support sched: - fix race condition in drm_sched_fini pagemap: - enable THP support - pass pagemap_addr by reference gem-shmem: - Track page accessed/dirty status across mmap/vmap gpusvm: - reenable device to device migration - fix unbalanced unclock bridge: - anx7625: Support USB-C plus DT bindings - connector: Fix EDID detection - dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve others - fsl-ldb: Fix visual artifacts plus related DT property 'enable-termination-resistor' - imx8qxp-pixel-link: Improve bridge reference handling - lt9611: Support Port-B-only input plus DT bindings - tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up - Support TH1520 HDMI plus DT bindings - waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus DT bindings - anx7625: Fix USB Type-C handling - cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check - Support Lontium LT8713SX DP MST bridge plus DT bindings - analogix_dp: Use DP helpers for link training panel: - panel-jdi-lt070me05000: Use mipi-dsi multi functions - panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN N116BCL-EAK (C2); Support FriendlyELEC plus DT changes - panel-edp: Fix timings for BOE NV140WUM-N64 - ilitek-ili9882t: Allow GPIO calls to sleep - jadard: Support TAIGUAN XTI05101-01A - lxd: Support LXD M9189A plus DT bindings - mantix: Fix pixel clock; Clean up - motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings - novatek: Support Novatek/Tianma NT37700F plus DT bindings - simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3" - novatek-nt36672a: Use mipi_dsi_*_multi() functions - panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW MNF307QS3-2 - support Himax HX83121A plus DT bindings - support JuTouch JT070TM041 plus DT bindings - support Samsung S6E8FC0 plus DT bindings - himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight - ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings - simple: support Tianma TM050RDH03 plus DT bindings amdgpu: - enable DC by default on CIK APUs - userq fence ioctl param size fixes - set panel_type to OLED for eDP - refactor DC i2c code - FAMS2 update - rework ttm handling to allow multiple engines - DC DCE 6.x cleanup - DC support for NUTMEG/TRAVIS DP bridge - DCN 4.2 support - GC12 idle power fix for compute - use struct drm_edid in non-DC code - enable NV12/P010 support on primary planes - support newer IP discovery tables - VCN/JPEG 5.0.2 support - GC/MES 12.1 updates - USERQ fixes - add DC idle state manager - eDP DSC seamless boot amdkfd: - GC 12.1 updates - non 4K page fixes xe: - basic Xe3p_LPG and NVL-P enabling patches - allow VM_BIND decompress support - add purgeable buffer object support - add xe_vm_get_property_ioctl - restrict multi-lrc to VCS/VECS engines - allow disabling VM overcommit in fault mode - dGPU memory optimizations - Workaround cleanups and simplification - Allow VFs VRAM quote changes using sysfs - convert GT stats to per-cpu counters - pagefault refactors - enable multi-queue on xe3p_xpc - disable DCC on PTL - make MMIO communication more robust - disable D3Cold for BMG on specific platforms - vfio: improve FLR sync for Xe VFIO i915/display: - C10/C20/LT PHY PLL divider verification - use trans push mechanism to generate PSR frame change on LNL+ - refactor DP DSC slice config - VGA decode refactoring - refactor DPT, gen2-4 overlay, masked field register macro helpers - refactor stolen memory allocation decisions - prepare for UHBR DP tunnels - refactor LT PHY PLL to use DPLL framework - implement register polling/waiting in display code - add shared stepping header between i915 and display i915: - fix potential overflow of shmem scatterlist length nouveau: - provide Z cull info to userspace - initial GA100 support - shutdown on PCI device shutdown nova-core: - harden GSP command queue - add support for large RPCs - simplify GSP sequencer and message handling - refactor falcon firmware handling - convert to new register macro - conver to new DMA coherent API - use checked arithmetic - add debugfs support for gsp-rm log buffers - fix aux device registration for multi-GPU msm: - CI: - Uprev mesa - Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices - Core: - Switched to of_get_available_child_by_name() - DPU: - Fixes for DSC panels - Fixed brownout because of the frequency / OPP mismatch - Quad pipe preparation (not enabled yet) - Switched to virtual planes by default - Dropped VBIF_NRT support - Added support for Eliza platform - Reworked alpha handling - Switched to correct CWB definitions on Eliza - Dropped dummy INTF_0 on MSM8953 - Corrected INTFs related to DP-MST - DP: - Removed debug prints looking into PHY internals - DSI: - Fixes for DSC panels - RGB101010 support - Support for SC8280XP - Moved PHY bindings from display/ to phy/ - GPU: - Preemption support for x2-85 and a840 - IFPC support for a840 - SKU detection support for x2-85 and a840 - Expose AQE support (VK ray-pipeline) - Avoid locking in VM_BIND fence signaling path - Fix to avoid reclaim in GPU snapshot path - Disallow foreign mapping of _NO_SHARE BOs - HDMI: - Fixed infoframes programming - MDP5: - Dropped support for MSM8974v1 - Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998 panthor: - add tracepoints for power and IRQs - fix fence handling - extend timestamp query with flags - support various sources for timestamp queries tyr: - fix names and model/versions rockchip: - vop2: use drm logging function - rk3576 displayport support - support CRTC background color atmel-hlcdc: - support sana5d65 LCD controller tilcdc: - use DT bindings schema - use managed DRM interfaces - support DRM_BRIDGE_ATTACH_NO_CONNECTOR verisilicon: - support DC8200 + DT bindings virtgpu: - support PRIME import with 3D enabled komeda: - fix integer overflow in AFBC checks mcde: - improve bridge handling gma500: - use drm client buffer for fbdev framebuffer amdxdna: - add sensors ioctls - provide NPU power estimate - support column utilization sensor - allow forcing DMA through IOMMU IOVA - support per-BO mem usage queries - refactor GEM implementation ivpu: - update boot API to v3.29.4 - limit per-user number of doorbells/contexts - perform engine reset on TDR error loongson: - replace custom code with drm_gem_ttm_dumb_map_offset() imx: - support planes behind the primary plane - fix bus-format selection vkms: - support CRTC background color v3d: - improve handling of struct v3d_stats komeda: - support Arm China Linlon D6 plus DT bindings imagination: - improve power-off sequence - support context-reset notification from firmware mediatek: - mtk_dsi: enable hs clock during pre-enable - Remove all conflicting aperture devices during probe - Add support for mt8167 display blocks" * tag 'drm-next-2026-04-15' of https://gitlab.freedesktop.org/drm/kernel: (1735 commits) drm/ttm/tests: Remove checks from ttm_pool_free_no_dma_alloc drm/ttm/tests: fix lru_count ASSERT drm/vram: remove DRM_VRAM_MM_FILE_OPERATIONS from docs drm/fb-helper: Fix a locking bug in an error path dma-fence: correct kernel-doc function parameter @flags ttm/pool: track allocated_pages per numa node. ttm/pool: make pool shrinker NUMA aware (v2) ttm/pool: drop numa specific pools ttm/pool: port to list_lru. (v2) drm/ttm: use gpu mm stats to track gpu memory allocations. (v4) mm: add gpu active/reclaim per-node stat counters (v2) gpu: nova-core: fix missing colon in SEC2 boot debug message gpu: nova-core: vbios: use from_le_bytes() for PCI ROM header parsing gpu: nova-core: bitfield: fix broken Default implementation gpu: nova-core: falcon: pad firmware DMA object size to required block alignment gpu: nova-core: gsp: fix undefined behavior in command queue code drm/shmem_helper: Make sure PMD entries get the writeable upgrade accel/ivpu: Trigger recovery on TDR with OS scheduling drm/msm: Use of_get_available_child_by_name() dt-bindings: display/msm: move DSI PHY bindings to phy/ subdir ...
2026-04-10net: bridge: add stp_mode attribute for STP mode selectionAndy Roulin
The bridge-stp usermode helper is currently restricted to the initial network namespace, preventing userspace STP daemons (e.g. mstpd) from operating on bridges in other network namespaces. Since commit ff62198553e4 ("bridge: Only call /sbin/bridge-stp for the initial network namespace"), bridges in non-init namespaces silently fall back to kernel STP with no way to use userspace STP. Add a new bridge attribute IFLA_BR_STP_MODE that allows explicit per-bridge control over STP mode selection: BR_STP_MODE_AUTO (default) - Existing behavior: invoke the /sbin/bridge-stp helper in init_net only; fall back to kernel STP if it fails or in non-init namespaces. BR_STP_MODE_USER - Directly enable userspace STP (BR_USER_STP) without invoking the helper. Works in any network namespace. Userspace is responsible for ensuring an STP daemon manages the bridge. BR_STP_MODE_KERNEL - Directly enable kernel STP (BR_KERNEL_STP) without invoking the helper. The mode can only be changed while STP is disabled, or set to the same value (-EBUSY otherwise). IFLA_BR_STP_MODE is processed before IFLA_BR_STP_STATE in br_changelink(), so both can be set atomically in a single netlink message. The mode can also be changed in the same message that disables STP. The stp_mode struct field is u8 since all possible values fit, while NLA_U32 is used for the netlink attribute since it occupies the same space in the netlink message as NLA_U8. A new stp_helper_active boolean tracks whether the /sbin/bridge-stp helper was invoked during br_stp_start(), so that br_stp_stop() only calls the helper for stop when it was called for start. This avoids calling the helper asymmetrically when stp_mode changes between start and stop. Suggested-by: Ido Schimmel <idosch@nvidia.com> Assisted-by: Claude:claude-opus-4-6 Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Andy Roulin <aroulin@nvidia.com> Link: https://patch.msgid.link/20260405205224.3163000-2-aroulin@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-09netkit: Add single device mode for netkitDaniel Borkmann
Add a single device mode for netkit instead of netkit pairs. The primary target for the paired devices is to connect network namespaces, of course, and support has been implemented in projects like Cilium [0]. For the rxq leasing the plan is to support two main scenarios related to single device mode: * For the use-case of io_uring zero-copy, the control plane can either set up a netkit pair where the peer device can perform rxq leasing which is then tied to the lifetime of the peer device, or the control plane can use a regular netkit pair to connect the hostns to a Pod/container and dynamically add/remove rxq leasing through a single device without having to interrupt the device pair. In the case of io_uring, the memory pool is used as skb non-linear pages, and thus the skb will go its way through the regular stack into netkit. Things like the netkit policy when no BPF is attached or skb scrubbing etc apply as-is in case the paired devices are used, or if the backend memory is tied to the single device and traffic goes through a paired device. * For the use-case of AF_XDP, the control plane needs to use netkit in the single device mode. The single device mode currently enforces only a pass policy when no BPF is attached, and does not yet support BPF link attachments for AF_XDP. skbs sent to that device get dropped at the moment. Given AF_XDP operates at a lower layer of the stack tying this to the netkit pair did not make sense. In future, the plan is to allow BPF at the XDP layer which can: i) process traffic coming from the AF_XDP application (e.g. QEMU with AF_XDP backend) to filter egress traffic or to push selected egress traffic up to the single netkit device to the local stack (e.g. DHCP requests), and ii) vice-versa skbs sent to the single netkit into the AF_XDP application (e.g. DHCP replies). Also, the control-plane can dynamically manage rxq leasing for the single netkit device without having to interrupt (e.g. down/up cycle) the main netkit pair for the Pod which has traffic going in and out. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: David Wei <dw@davidwei.uk> Signed-off-by: David Wei <dw@davidwei.uk> Reviewed-by: Jordan Rife <jordan@jrife.io> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://docs.cilium.io/en/stable/operations/performance/tuning/#netkit-device-mode [0] Link: https://patch.msgid.link/20260402231031.447597-11-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-09net: Add queue-create operationDaniel Borkmann
Add a ynl netdev family operation called queue-create that creates a new queue on a netdevice: name: queue-create attribute-set: queue flags: [admin-perm] do: request: attributes: - ifindex - type - lease reply: &queue-create-op attributes: - id This is a generic operation such that it can be extended for various use cases in future. Right now it is mandatory to specify ifindex, the queue type which is enforced to rx and a lease. The newly created queue id is returned to the caller. A queue from a virtual device can have a lease which refers to another queue from a physical device. This is useful for memory providers and AF_XDP operations which take an ifindex and queue id to allow applications to bind against virtual devices in containers. The lease couples both queues together and allows to proxy the operations from a virtual device in a container to the physical device. In future, the nested lease attribute can be lifted and made optional for other use-cases such as dynamic queue creation for physical netdevs. The lack of lease and the specification of the physical device as an ifindex will imply that we need a real queue to be allocated. Similarly, the queue type enforcement to rx can then be lifted as well to support tx. An early implementation had only driver-specific integration [0], but in order for other virtual devices to reuse, it makes sense to have this as a generic API in core net. For leasing queues, the virtual netdev must have real_num_rx_queues less than num_rx_queues at the time of calling queue-create. The queue-type must be rx as only rx queues are supported for leasing for now. We also enforce that the queue-create ifindex must point to a virtual device, and that the nested lease attribute's ifindex must point to a physical device. The nested lease attribute set contains a netns-id attribute which is optional and can specify a netns-id relative to the caller's netns. It requires cap_net_admin and if the netns-id attribute is not specified, the lease ifindex will be retrieved from the current netns. Also, it is modeled as an s32 type similarly as done elsewhere in the stack. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: David Wei <dw@davidwei.uk> Signed-off-by: David Wei <dw@davidwei.uk> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://bpfconf.ebpf.io/bpfconf2025/bpfconf2025_material/lsfmmbpf_2025_netkit_borkmann.pdf [0] Link: https://patch.msgid.link/20260402231031.447597-2-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-08devlink: Add resource scope filtering to resource dumpOr Har-Toov
Allow filtering the resource dump to device-level or port-level resources using the 'scope' option. Example - dump only device-level resources: $ devlink resource show scope dev pci/0000:03:00.0: name max_local_SFs size 128 unit entry dpipe_tables none name max_external_SFs size 128 unit entry dpipe_tables none pci/0000:03:00.1: name max_local_SFs size 128 unit entry dpipe_tables none name max_external_SFs size 128 unit entry dpipe_tables none Example - dump only port-level resources: $ devlink resource show scope port pci/0000:03:00.0/196608: name max_SFs size 128 unit entry dpipe_tables none pci/0000:03:00.0/196609: name max_SFs size 128 unit entry dpipe_tables none pci/0000:03:00.1/196708: name max_SFs size 128 unit entry dpipe_tables none pci/0000:03:00.1/196709: name max_SFs size 128 unit entry dpipe_tables none Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260407194107.148063-11-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-08devlink: Add port-specific option to resource dump doitOr Har-Toov
Allow querying devlink resources per-port via the resource-dump doit handler. When a port-index attribute is provided, only that port's resources are returned. When no port-index is given, only device-level resources are returned, preserving backward compatibility. Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260407194107.148063-8-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-08devlink: Add dump support for device-level resourcesOr Har-Toov
Add dumpit handler for resource-dump command to iterate over all devlink devices and show their resources. $ devlink resource show pci/0000:08:00.0: name local_max_SFs size 508 unit entry name external_max_SFs size 508 unit entry pci/0000:08:00.1: name local_max_SFs size 508 unit entry name external_max_SFs size 508 unit entry Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20260407194107.148063-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-06psp: add missing device stats to get-stats reply attributesDaniel Zahka
Commit f05d26198cf2 ("psp: add stats from psp spec to driver facing api") added device statistics (rx-packets, rx-bytes, rx-auth-fail, rx-error, rx-bad, tx-packets, tx-bytes, tx-error) to the stats attribute-set but did not add them to the get-stats operation reply attributes. The kernel reports these attributes in the reply, so list them in the spec to match. Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260403-psp-yaml-fix-v1-1-dacee0663903@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-03dpll: add frequency monitoring to netlink specIvan Vecera
Add DPLL_A_FREQUENCY_MONITOR device attribute to allow control over the frequency monitor feature. The attribute uses the existing dpll_feature_state enum (enable/disable) and is present in both device-get reply and device-set request. Add DPLL_A_PIN_MEASURED_FREQUENCY pin attribute to expose the measured input frequency in millihertz (mHz). The attribute is present in the pin-get reply. Add DPLL_PIN_MEASURED_FREQUENCY_DIVIDER constant to allow userspace to extract integer and fractional parts. Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Link: https://patch.msgid.link/20260402184057.1890514-2-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2026-07-10 02:23:42 +0000