| Age | Commit message (Collapse) | Author |
|
Two corrections against the TRM (SLOU589A):
- Corrected channel temperature range
- Corrected conversion formula for global temperature
Fixes: ba46edca354e ("Documentation: sound: Add TAS675x codec mixer controls documentation")
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260630183126.2588322-4-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Unsurprisingly, we've had a fairly busy development cycle with various
fixes and enhancements. While the majority of changes consist of
device-specific fixes, a significant number of cleanups, hardening,
and modernizations have been applied to the core frameworks as well.
Below are some highlights:
ALSA Core:
- Hardening, race condition, and UAF/leak fixes in the ALSA timer and
sequencer cores
- Widespread adoption of flexible array members across core
structures
- Integration of new simple refcount helper functions to simplify
code
ASoC Core:
- Introduction of a unified SoundWire enumeration helper to clean up
redundant device initialization across codecs
- Enhancements to SDCA support, including handling devices with
multiple functions of the same type and proper jack reporting masks
- Continued refactoring of ASoC component debugfs and DAPM structures
- Simplification and improvements to the format auto-selection
mechanism
- Added shared BCLK rate constraints for cross-DAI coordination
ASoC Platforms & Codecs:
- Initial bring-up and power management support for AMD ACP 7.x
- Support for Everest Semi ES9356 (SDCA), Mediatek MT2701 (on-chip
HDMI) and MT8196 SoCs, Renesas RZ/G3E, SpacemiT K3, and TI
TAC5xx2/TAS67524
- Added a new generic driver for GPIO-driven amplifiers
- Continued mass conversion of locking code to guard() helpers across
numerous platform drivers (MediaTek, Rockchip, STM32, Samsung, etc)
- Cleanup of legacy non-DT platform data and rollbacks for obsolete
SH Ecovec24/7724se boards
HD- and USB-Audio:
- Device-specific hardware quirks and fixes for various Realtek
HD-Audio devices (Lenovo, HP, ASUS, Acer, Clevo)
- Refinements to Qualcomm USB-audio offloading support
- Front-panel controls and autogain status support for Scarlett Gen 4
- Quirks for XIBERIA (K03S), Sennheiser (MOMENTUM 3), Edifier
(MF200), Novation (Mininova), and Behringer (Flow 8) USB-audio
devices
- Improved robustness by rolling back or propagating write errors to
the mixer control caches (Babyface Pro, US-16x08, Scarlett)
Others:
- Support for the HT-Omega eClaro PCI sound card in the Oxygen driver
- Robustness improvements and fixes for Virtio-audio, Xen-front, and
legacy OSS dmasound drivers"
* tag 'sound-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (483 commits)
ALSA: usb-audio: Add iface reset and delay quirk for XIBERIA K03S
ALSA: hda/realtek: Add quirk for Lenovo Xiaoxin 14 GT
ALSA: hda/realtek: Add CS35L41 I2C quirk for ASUS UM3405GA
ALSA: timer: Fix racy timeri->timer changes with rwlock
ALSA: core: Fix unintuitive behavior of snd_power_ref_and_wait()
ALSA: seq: avoid stale FIFO cells during resize
ALSA: seq: oss: Serialize readq reset state with q->lock
ASoC: dt-bindings: Fix RT5677 "realtek,gpio-config" type
ASoC: audio-graph-card2: recommend to use auto select DAI format
ASoC: update auto format selection method
ASoC: renesas: rcar: update auto select format
ASoC: codecs: pcm3168a: update auto select format
ASoC: codecs: ak4619: update auto select format
ASoC: codecs: peb2466: don't use array if single pattern
ASoC: codecs: idt821034: don't use array if single pattern
ASoC: codecs: framer-codec: don't use array if single pattern
ASoC: remove SND_SOC_POSSIBLE_xBx_xFx
ASoC: adau1372: Clear PLL_EN on failed PLL lock without reset GPIO
ALSA: seq: Don't re-bounce the error event
ASoC: bcm: cygnus: use scoped child node loop
...
|
|
Pull documentation updates from Jonathan Corbet:
"Things have calmed down a bit on the docs front, with no earthshaking
changes this time around:
- Ongoing work on the Japanese and Portuguese translations
- Better integration of the MAINTAINERS file into the rendered
documents, including a search interface
- A seemingly infinite supply of fixes for typos, minor grammatical
issues, and related problems that LLMs find with abandon"
* tag 'docs-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (93 commits)
docs: pt_BR: Translate 3.Early-stage.rst into Portuguese
docs: pt_BR: update "Purpose of Defconfigs" section in maintainer-soc.rst
Documentation: bug-hunting.rst: fix grammar
docs/ja_JP: translate submitting-patches.rst (interleaved-replies)
docs: Fix minor grammatical error
docs/{it_it,sp_SP,zh_CN,zh_TW}: update references to removed CONFIG_DEBUG_SLAB
Documentation: process: fix brackets
Documentation: arch: fix brackets
docs/dyndbg: explain flags parse 1st
docs/dyndbg: update examples \012 to \n
docs: kernel-parameters: Fix stale sticore file paths
docs: real-time: Fix duplicated sched(7) text
docs: kgdb: Fix stale source file paths
docs: sonypi: Fix stale header file path
docs: kernel-parameters: Remove sa1100ir IrDA parameter
iommu: Documentation: rearrange, update kernel-parameters
docs: md: fix grammar in speed_limit description
docs: changes.rst: restore pahole 1.26 minimum (regressed by sort)
Documentation: Fix syntax of kmalloc_objs example in coding style doc
docs: pt_BR: update maintainer-handbooks
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.2
There's been quite a lot of framework improvements this time around,
though mainly cleanups and robustness rather than user visible features.
The same pattern is seen with a lot of the driver work that's going on,
there are new features but a huge proportion of this is bug fixing and
cleanup work. We also have a good selectio of new device support.
- Improvements to SDCA jack handling from Charles Keepax.
- Use of device links to make suspend handling more robust from Richard
Fitzgerald.
- Use of a new helper to factor out a common pattern in SoundWire
enmeration from Charles Keepax.
- Slimming down of the component from Kuninori Morimoto.
- Simplification of format auto selection from Kuninori Morimoto.
- Lots of conversions to guard() from Bui Duc Phuc.
- Addition of a simple-amplifier driver supporting more featureful GPIO
controller amplifiers than the previous basic driver from Herve
Codina.
- Support for AMD ACP 7.x, Cirrus Logic CS42448/CS42888, Everest Semi
ES9356, Mediatek MT2701 and MT8196, Renesas RZ/G3E, Spacemit K3,
Texas Instruments TAC5xx2 and TAS67524.
|
|
Since commit 86aa1ea1f15c ("ALSA: usb-audio: Do not expose sticky
mixers"), the UAC mixer core utilizes volume SET_CUR and GET_CUR to
identify devices with sticky mixers. Unfortunately, even though most
devices with sticky GET_CUR also have corresponding sticky SET_CUR,
which I actually met more since the commit had been merged, there is
also a rare case that some devices may have volume mixers that responds
to SET_CUR properly but with its GET_CUR stubbed. This cause the sticky
check to consider the mixer to be sticky and unnecessarily disable it.
As the sticky check can't distinguish between sticky mixers and working
SET_CUR but broken GET_CUR, add QUIRK_FLAG_MIXER_GET_CUR_BROKEN to tell
that the device should fall into the second category when GET_CUR
returns a constant value. In this case, the sticky check becomes
non-fatal and only disables GET_CUR instead of the whole mixer. The
current volume will then be provided by the internal cache that stores
the last set volume.
An info message prompting users to check MIXER_GET_CUR_BROKEN for
potential sticky mixers is also added, so that users can learn how to do
some experiments to determine what's going on. If the mixer surprisingly
turns out to be non-sticky, they can submit a patch for a new quirk
table entry.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260531-uac-quirk-get-cur-vol-v4-1-ede643dca151@rong.moe
|
|
QUIRK_FLAG_IFB_SILENCE_ON_EMPTY was introduced into usb-audio before
without appropriate documentation, so add it.
Fixes: a23812004228 ("ALSA: usb-audio: add IFB_SILENCE_ON_EMPTY quirk for Behringer Flow 8")
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260527-uac-quirk-get-cur-vol-v1-1-e9362b712e5e@rong.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Herve Codina <herve.codina@bootlin.com> says:
On some embedded system boards, audio amplifiers are designed using
discrete components such as op-amp, several resistors and switches to
either adjust the gain (switching resistors) or fully switch the
audio signal path (mute and/or bypass features).
Those switches are usually driven by simple GPIOs.
This kind of amplifiers are not handled in ASoC and the fallback is to
let the user-space handle those GPIOs out of the ALSA world.
In order to have those kind of amplifiers fully integrated in the audio
stack, this series introduces the audio-gpio-amp to handle them.
This new ASoC component allows to have the amplifiers seen as ASoC
auxiliarty devices and so it allows to control them through audio mixer
controls.
In order to ease the review, I choose to split modifications related
to the merge of the gpio-audio-amp part into the simple-amplfier driver
in several commits.
Link: https://patch.msgid.link/20260513081702.317117-1-herve.codina@bootlin.com
|
|
The HDA drivers were moved to sound/hda/... so update a Documentation
reference that still pointed to the old location.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260511104148.36382-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
While reading some docs, I have found some minor
misspelled words and some parts that could be improved.
The ASoC USB documentation refers to the USB DPCM backend link as DCPM
in two places. The ASoC platform documentation still points readers to
the old DPCM.txt name. The ALSA configuration guide also has two
references that omit their current subdirectory.
Fix a few stale and misspelled references in the ALSA and ASoC
documentation and update the references and fix a typo in the ASoC index.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260508-asoc-doc-fixes-v1-1-b53eec42e340@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the documentation to reflect new type-aware kmalloc-family as
suggested in commit 2932ba8d9c99 ("slab: Introduce kmalloc_obj()
and family")
ptr = kmalloc(sizeof(*ptr), gfp);
-> ptr = kmalloc_obj(*ptr, gfp);
ptr = kmalloc(sizeof(struct some_obj_name), gfp);
-> ptr = kmalloc_obj(*ptr, gfp);
ptr = kzalloc(sizeof(*ptr), gfp);
-> ptr = kzalloc_obj(*ptr, gfp);
ptr = kmalloc_array(count, sizeof(*ptr), gfp);
-> ptr = kmalloc_objs(*ptr, count, gfp);
ptr = kcalloc(count, sizeof(*ptr), gfp);
-> ptr = kzalloc_objs(*ptr, count, gfp);
Signed-off-by: Manuel Ebner <manuelebner@mailbox.org>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260429071445.309733-2-manuelebner@mailbox.org>
|
|
Add tas675x.rst to the index file and extend the heading underline
to avoid build warnings:
Documentation/sound/codecs/tas675x.rst: WARNING: document isn't included in any toctree [toc.not_included]
Documentation/sound/codecs/tas675x.rst:659: WARNING: Title underline too short.
Overtemperature Shutdown (0x87)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [docutils]
Fixes: ba46edca354e ("Documentation: sound: Add TAS675x codec mixer controls documentation")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260429225751.1995224-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add documentation for the TAS675x mixer controls, fault monitoring,
and driver known limitations.
Signed-off-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260416232640.3084132-4-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some quirky devices tune their volume by linearly tuning the voltage
level (linear volume). In other words, such devices has a linear TLV
mapping of DECLARE_TLV_DB_LINEAR(scale, TLV_DB_GAIN_MUTE, 0).
Add quirk flags MIXER_PLAYBACK_LINEAR_VOL and MIXER_CAPTURE_LINEAR_VOL
to represent this case respectively for playback and capture mixers.
No functional change intended.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260303194805.266158-7-i@rong.moe
|
|
QUIRK_FLAG_SKIP_IFACE_SETUP was introduced into usb-audio before without
appropriate documentation, so add it.
Fixes: 38c322068a26 ("ALSA: usb-audio: Add QUIRK_FLAG_SKIP_IFACE_SETUP")
Cc: stable@vger.kernel.org
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260302173300.322673-1-i@rong.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Rhys Tumelty <rhys@tumelty.co.uk>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260128220233.179439-1-rhys@tumelty.co.uk>
|
|
The root document usually has a special :ref:`genindex` link to the
generated index. This is also the case for Documentation/index.rst. The
other index.rst files deeper in the directory hierarchy usually don't.
For SPHINXDIRS builds, the root document isn't Documentation/index.rst,
but some other index.rst in the hierarchy. Currently they have a
".. only::" block to add the index link when doing SPHINXDIRS html
builds.
This is obviously very tedious and repetitive. The link is also added to
all index.rst files in the hierarchy for SPHINXDIRS builds, not just the
root document.
Put the boilerplate in a sphinx-includes/subproject-index.rst file, and
include it at the end of the root document for subproject builds in an
ad-hoc source-read extension defined in conf.py.
For now, keep having the boilerplate in translations, because this
approach currently doesn't cover translated index link headers.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
[jc: did s/doctree/kern_doc_dir/ ]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260123143149.2024303-1-jani.nikula@intel.com>
|
|
Update the text for firmware file naming to show that the l?u? suffix is
supported on CS35L56 B0 silicon and ampN was only used on early firmware.
The previous version of this text only said that B0 silicon used the ampN
suffix. Since kernel 6.16 the driver supports both the old ampN and
new l?u? suffix for B0 silicon. New firmwares will use the l?u? suffix.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251103115809.33953-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
interally => internally
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Just briefly described about the option's change and its new usage.
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull 6.17-devel branch for applying further changes cleanly.
Signed-off-by: Taksahi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.18
A relatively quiet release for ASoC, we've had a lot of maintainance
work going on and several new drivers but really the most remarkable
thing is that we removed a driver, the WL1273 driver used in some old
Nokia systems that have had the underlying system support removed from
the kernel.
- Morimoto-san continues his work on cleanups of the core APIs and
enforcement of abstraction layers.
- Lots of cleanups and conversions of DT bindings.
- Substantial maintainance work on the Intel AVS drivers.
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754.
- Remove support for TI WL1273.
|
|
Merge series from Stefan Kerkmann <s.kerkmann@pengutronix.de>:
Add a CODEC driver for the TI PCM1754.
|
|
The same hardware problem to QUIRK_FLAG_MIXER_PLAYBACK_MIN_MUTE also
occurs on the capture streams on some USB devices. Add a new flag for
processing the quirk.
Link: https://lore.kernel.org/all/C22C1A172EBB9BD9+eccc2e4a-d21e-4a7d-848c-bbf3982feb94@uniontech.com/
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250903-sound-v1-2-d4ca777b8512@uniontech.com
|
|
Fixes: 78811dd56def ("ALSA: docs: Add documents for recently changes in snd-usb-audio")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://patch.msgid.link/20250903100842.267194-1-pmenzel@molgen.mpg.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Changed:
- ignore_ctl_error
- lowlatency
- skip_validation
- quirk_flags[19:24]
[ corrected a typo -- tiwai ]
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Link: https://patch.msgid.link/20250829-sound-doc-v1-1-e0110452b03d@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ASoC codec and platform driver docs contain reference to writing ALSA
driver docs, as an external link. Use :doc: directive for the job
instead.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Message-ID: <20250829075524.45635-13-bagasdotme@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add CS35L63 to the list of parts supported by the cs35l56 driver and
mention the CS35L63 where the text refers to the supported part numbers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250618145547.152814-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the new firmware filename suffix used for SoundWire systems with
CS35L57, CS35L63 or CS35L56 later than B0 silicon. This uses the SoundWire
physical address of the amp to identify which firmware file to load on that
amp.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the introduction of the soc-usb driver, add documentation highlighting
details on how to utilize the new driver and how it interacts with
different components in USB SND and ASoC. It provides examples on how to
implement the drivers that will need to be introduced in order to enable
USB audio offloading.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250409194804.3773260-20-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received lots of commits at this time, as a result of various
cleanup and refactoring works as well as a few new drivers and the
generic SoundWire support. Most of changes are device-specific, little
about the core changes. Some highlights below:
Core:
- A couple of (rather minor) race fixes in ALSA sequencer code
- A regression fix in ALSA timer code that may lead to a deadlock
ASoC:
- A large series of code conversion to use modern terminology for the
clocking configuration
- Conversions of PM ops with the modern macros in all ASoC drivers
- Clarification of the control operations
- Prepartory work for more generic SoundWire SCDA controls
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95,
nVidia Tegra interconnects, Rockchip RK3588 S/PDIF, Texas
Instruments SN012776 and TAS5770L, and Wolfson WM8904 DMICs
Others:
- Conversions of PM ops with the modern macros in the rest drivers
- USB-audio quirks and fixes for Presonus Studio, DJM-A9, CME
- HD-audio quirks and fixes ASUS, HP, Lenovo, and others"
* tag 'sound-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (651 commits)
ALSA: hda: tas2781-i2c: Remove unnecessary NULL check before release_firmware()
ALSA: hda: cs35l56: Remove unnecessary NULL check before release_firmware()
ALSA: hda/realtek: Bass speaker fixup for ASUS UM5606KA
ALSA: hda/realtek: Fix built-in mic assignment on ASUS VivoBook X515UA
ALSA: hda/realtek: Add support for various HP Laptops using CS35L41 HDA
ALSA: timer: Don't take register_mutex with copy_from/to_user()
ASoC: SDCA: Correct handling of selected mode DisCo property
ASoC: amd: yc: update quirk data for new Lenovo model
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3247
ALSA: hda/realtek: fix micmute LEDs on HP Laptops with ALC3315
ASoC: SOF: mediatek: Commonize duplicated functions
ASoC: dmic: Fix NULL pointer dereference
ASoC: wm8904: add DMIC support
ASoC: wm8904: get platform data from DT
ASoC: dt-bindings: wm8904: Add DMIC, GPIO, MIC and EQ support
ASoC: wm8904: Don't touch GPIO configs set to 0xFFFF
of: Add of_property_read_u16_index
ALSA: oxygen: Fix dependency on CONFIG_PM_SLEEP
ASoC: ops: Apply platform_max after deciding control type
ASoC: ops: Remove some unnecessary local variables
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.15
This is a very big release due to a combination of some big new work,
mainly new drivers and generic SoundWire support, and some wide ranging
cleanup work that made small changes to a lot of drivers.
- Morimoto-san has completed the conversion to use modern terminology
for the clocking configuration, and several other cleanups with
narrower impact.
- All the power management operation configuration was updated to use
current idioms by Takashi Iwai.
- Clarification of the control operations from Charles Keepax.
- Prepartory work for more generic SoundWire SCDA controls from Charles
Keepax.
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95, nVidia
Tegra interconnects, Rockchip RK3588 S/PDIF, Texas Instruments
SN012776 and TAS5770L, and Wolfson WM8904 DMICs,
Some changes from the tip tree adding APIs needed by the AMD code are
included, these were unfortunately rebased in the tip tree after being
pulled in. There's also some regmap changes supporting the SCDA work
and some devres refactoring that was pulled in to support other changes.
|
|
We can use SND_SOC_DAILINK_xxx() macro to define CPU/Codec/Platform.
Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tt88z5nd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_DAIFMT_CBx_CFx
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87eczlh4s7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In SND_SOC_DAIFMT_CBx_CFx, M/S are no longer used. use P/C.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ikp6vii9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fixed some spelling issues in documentations.
Signed-off-by: Armin Mahdilou <Armin.Mahdilou@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250210192754.30283-1-Armin.Mahdilou@gmail.com
|
|
It's /sys/module/ (singular), not /sys/modules/.
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Link: https://patch.msgid.link/20250130180823.1864-2-jwilk@jwilk.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Link: https://patch.msgid.link/20250130180823.1864-1-jwilk@jwilk.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull pending ASoC and HD-audio fixes for 6.14-rc1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
So far we notify the sequencer client and port changes upon UMP FB
changes, but those aren't really corresponding to the UMP updates.
e.g. when a FB info gets updated, it's not notified but done only when
some of sequencer port attribute is changed. This is no ideal
behavior.
This patch adds the two new sequencer event types for notifying the
UMP EP and FB changes via the announce port. The new event takes
snd_seq_ev_ump_notify type data, which is compatible with
snd_seq_addr (where the port number is replaced with the block
number).
The events are sent when the EP and FB info gets updated explicitly
via ioctl, or the backend UMP receives the corresponding UMP
messages.
The sequencer protocol version is bumped to 1.0.5 along with it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-9-tiwai@suse.de
|
|
The UMP legacy rawmidi may turn on/off the substream dynamically
depending on the UMP Function Block information. So far, there was no
direct way to know whether the substream is disabled (inactive) or
not; at most one can take a look at the substream name string or try
to open and get -ENODEV.
This patch extends the rawmidi info ioctl to show the current inactive
state of the given substream. When the selected substream is
inactive, info flags field contains the new bit flag
SNDRV_RAWMIDI_INFO_STREAM_INACTIVE.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-3-tiwai@suse.de
|
|
The UMP legacy rawmidi is derived from the UMP rawmidi, but currently
there is no way to know which device is involved in other side.
This patch extends the rawmidi info ioctl to show the tied device
number. As default it stores -1, indicating that no tied device.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-2-tiwai@suse.de
|
|
commit 088fb4ee17fc ("ALSA: doc: cs35l56: Add information about
Cirrus Logic CS35L54/56/57") added a new subdirectory with an index
file, so this file must be added to the top-level index.
Fixes: 088fb4ee17fc ("ALSA: doc: cs35l56: Add information about Cirrus Logic CS35L54/56/57")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250109105657.96860-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add documentation for the Cirrus Logic CS35L54/56/57 amps, which are
all managed by the cs35l56 drivers.
The aim and scope of this documentation is to provide troubleshooting
information for end-users.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250108141045.1032-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A pile of driver specific quirks and fixes that came in since the merge
window. One of the AMD fixes is a bit broken for some systems, I'm
expecting an incremental change to fix that but it seems better overall
to merge the rest of the fixes.
There's also one small documentation update that seemed sensible to
apply now, pointing to the dapm-graph tool.
|
|
To help developers debug DAPM issues and visualize widget connectivity,
the dapm-graph tool provides a graphical representation of how widgets
and routes are connected. This commit adds the location information for
the tool to the documentation, making it easier for users to find and
use it for troubleshooting DAPM-related problems.
Signed-off-by: anish kumar <yesanishhere@gmail.com>
Link: https://patch.msgid.link/20241121232958.46179-1-yesanishhere@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update the hyperlink as it currently redirects to a generic site
instead of the actual specification.
Signed-off-by: Hridesh MG <hridesh699@gmail.com>
Link: https://patch.msgid.link/20241120155553.21099-1-hridesh699@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.13
This release was mainly about new drivers, there's a very large batch of
new drivers and devices including quite a few from newer vendors which
is great to see. Other than the new drivers and the usual routine fixes
and enhancements the bulk of the work has been Morimoto-san's continuing
work on simplifiying APIs, plus a few other bits:
- More API simplifications from Morimoto-san.
- Renaming of the sh directory to Renesas to reflect the focus on other
architectures.
- Factoring out of some of the common code for Realtek devices.
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon
I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm
SM8750, RealTek RT721, and ST Microelectronics STM32MP25.
|
|
1. Added clocking details.
2. Updated ways to register the dai's
3. Bit more detail about card registration details.
Signed-off-by: anish kumar <yesanishhere@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20241109192231.11623-1-yesanishhere@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Added ASoC clock api kernel doc in this
document.
Signed-off-by: anish kumar <yesanishhere@gmail.com>
Link: https://patch.msgid.link/20241031035829.54852-1-yesanishhere@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sphinx reports missing toctree entry warning for co-processor
acceleration API docs:
Documentation/sound/designs/compress-accel.rst: WARNING: document isn't included in any toctree
Add the missing entry to fix the warning.
Fixes: 04177158cf98 ("ALSA: compress_offload: introduce accel operation mode")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20241028111647.17378-3-bagasdotme@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|