| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer.
* tag 'mips-fixes_7.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: configs: Enable the current Ingenic USB PHY symbol
MIPS: loongson64: add IRQ work based on self-IPI
MIPS: mm: Add check for highmem before removing memory block
mips: Add build salt to the vDSO
MIPS: DEC: Ensure RTC platform device deregistration upon failure
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
(headers)
<linux/mod_devicetable.h> is included in a many files:
$ git grep '<linux/mod_devicetable.h>' ef0c9f75a195 | wc -l
1598
; some of them are widely used headers. To stop mixing up different and
unrelated driver( type)s let the subsystem headers only use the subset
of the recently split <linux/mod_devicetable.h> that are relevant for
them.
The fallout (I hope) is addressed in the previous commits that handle
sources relying on e.g. <linux/i2c.h> pulling in the full legacy header
and thus providing pci_device_id.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/199fe46b624ba07fb9bd3e0cd6ff13757932cb5f.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
The Ingenic USB PHY provider is now built from phy-ingenic-usb.o under
`CONFIG_PHY_INGENIC_USB`.
The Ingenic defconfigs below still enable the stale `CONFIG_JZ4770_PHY`
symbol. That symbol no longer carries the provider object, so the
defconfigs lose the intended USB PHY provider after olddefconfig.
Use `CONFIG_PHY_INGENIC_USB` instead.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Since the commit 91840be8f710 ("irq_work: Fix use-after-free in
irq_work_single() on PREEMPT_RT"), we observed the performance of
execve() is significantly impacted on MIPS.
While we are unsure how that commit caused the impact or how to improve
it (or even if it can be improved at all), implementing IRQ work with
self-IPI seems able to mitigate the impaction.
Perhaps this can/should be implemented for other MIPS architecture
processors as well, but we don't have the enough knowledge of them, nor
access to the hardware. So only implement it for loongson64 here.
Link: https://lore.kernel.org/6be1cdd5f91dd7418a32ff372a6f3ae259b19195.camel@xry111.site/
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
If a device has less physical memory than the highmem threshold
bootmem_init() doesn't set highstart_pfn. This results in highmem_init()
wrongly disabling the entire memory range if the cpu doesn't support
highmem. Add a check that highstart_pfn is non zero before removing the
highmem block.
Fixes: f171b55f1441 ("mips: fix HIGHMEM initialization")
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The vDSO needs to have a unique build id in a similar manner
to the kernel and modules. Use the build salt macro.
Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Switch RTC platform device registration from platform_device_register()
to platform_add_devices() so as to make sure any failure will result in
automatic device unregistration.
Fixes: fae67ad43114 ("arch/mips/dec: switch DECstation systems to rtc-cmos")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 7.2-rc1.
Nothing major in here, just constant grind of tiny cleanups and coding
style fixes and wrapper removals. Overall more code was removed than
added, always a nice sign that things are progressing forward.
Changes outside of drivers/staging/ was due to the octeon driver
changes, which for some reason also lives partially in the mips
subsystem, someday that all will be untangled and cleaned up, or just
removed entirely, it's hard to tell which is going to be its fate.
Other than octeon driver cleanups, in here are the usual:
- rtl8723bs driver reworking and cleanups, being the bulk of this
merge window given all of the issues and wrappers involved in that
beast of a driver
- most driver cleanups
- sm750fb driver cleanups (which might be done, as this really should
be moved to the drm layer one of these days...)
- other tiny staging driver cleanups and fixes
All of these have been in linux-next for many weeks with no reported
issues"
* tag 'staging-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (199 commits)
staging: most: video: avoid double free on video register failure
staging: sm750: rename CamelCase variable Bpp to bpp
staging: rtl8723bs: delete superfluous switch statement
staging: sm750fb: Mark g_noaccel, g_nomtrr and g_dualview as __ro_after_init
staging: rtl8723bs: propagate errno through hal xmit path
staging: rtl8723bs: propagate errno through xmit enqueue path
staging: rtl8723bs: convert rtw_xmit_classifier to return errno
staging: rtl8723bs: make rtw_xmit_classifier static
staging: rtl8723bs: simplify rtw_xmit_classifier control flow
staging: rtl8723bs: make _rtw_enqueue_cmd return 0 on success
staging: rtl8723bs: simplify rtw_enqueue_cmd control flow
staging: rtl8723bs: make _rtw_enqueue_cmd static
staging: rtl8723bs: simplify _rtw_enqueue_cmd control flow
staging: rtl8723bs: fix multiple blank lines in more hal/ files
staging: rtl8723bs: remove unused TXDESC_64_BYTES code
staging: rtl8723bs: remove unused DBG_XMIT_BUF and DBG_XMIT_BUF_EXT code
staging: rtl8723bs: fix multiple blank lines in hal/Hal* files
staging: rtl8723bs: fix multiple blank lines in hal/ files
staging: rtl8723bs: rtw_mlme: add blank line for readability
staging: rtl8723bs: rtw_mlme: wrap rtw_sitesurvey_cmd condition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- use software nodes for GPIO code
- cleanups and fixes
* tag 'mips_7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (41 commits)
mips: select legacy gpiolib interfaces where used
MIPS: lib: Remove '.hidden' for local symbols
MIPS: VDSO: Avoid including .got in dynamic segment
MIPS: smp: report dying CPU to RCU in stop_this_cpu()
MIPS: kernel: proc: Delete unnecessary braces in show_cpuinfo()
MIPS: kernel: proc: Use seq_putc() calls in show_cpuinfo()
mips: sched: Fix CPUMASK_OFFSTACK memory corruption
MIPS: mm: Fix out-of-bounds write in maar_res_walk()
MIPS: ath79: reduce ARCH_DMA_MINALIGN
mips: dts: ar9132: fix wdt node name
mips: Remove remaining defconfig references to the pktcdvd driver
MIPS: mm: remove comment referring to removed CONFIG_MIPS_CMP
MIPS: alchemy: db1300: switch to static device properties
MIPS: alchemy: gpr: switch to static device properties
MIPS: alchemy: db1000: use nodes attached to GPIO chips in properties
MIPS: alchemy: mtx1: attach software nodes to GPIO chips
MIPS: alchemy: provide visible function prototypes to board files
MIPS: alchemy: platform: add missing include
MIPS: ip22-gio: do not export device release function
MIPS: ip22-gio: switch to dynamic root device
...
|
|
Pull bitmap updates from Yury Norov:
"This includes the new FIELD_GET_SIGNED() helper,
bitmap_print_to_pagebuf() removal, RISCV/bitrev support, and a couple
cleanups.
- new handy helper FIELD_GET_SIGNED() (Yury)
- arch test_and_set_bit_lock() and clear_bit_unlock() cleanup (Randy)
- __bf_shf() simplification (Yury)
- bitmap_print_to_pagebuf() removal (Yury)
- RISCV/bitrev conditional support (Jindie, Yury)"
* tag 'bitmap-for-7.2' of https://github.com/norov/linux:
MAINTAINERS: BITOPS: include bitrev.[ch]
arch/riscv: Add bitrev.h file to support rev8 and brev8
bitops: Define generic___bitrev8/16/32 for reuse
lib/bitrev: Introduce GENERIC_BITREVERSE
arch: select HAVE_ARCH_BITREVERSE conditionally on BITREVERSE
bitmap: fix find helper documentation
bitmap: drop bitmap_print_to_pagebuf()
cpumask: switch cpumap_print_to_pagebuf() to using scnprintf()
bitfield: wire __bf_shf to __builtin_ctzll
bitops: use common function parameter names
ptp: switch to using FIELD_GET_SIGNED()
rtc: rv3032: switch to using FIELD_GET_SIGNED()
wifi: rtw89: switch to using FIELD_GET_SIGNED()
iio: mcp9600: switch to using FIELD_GET_SIGNED()
iio: pressure: bmp280: switch to using FIELD_GET_SIGNED()
iio: magnetometer: yas530: switch to using FIELD_GET_SIGNED()
iio: intel_dc_ti_adc: switch to using FIELD_GET_SIGNED()
x86/extable: switch to using FIELD_GET_SIGNED()
bitfield: add FIELD_GET_SIGNED()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
|
AppleTalk has been removed in MacOS X 10.6 (Snow Leopard), in 2009,
according to Wikipedia. We recently got a burst of AI generated
fixes to this protocol which nobody is reviewing.
Let AppleTalk follow AX.25 and hamradio out of the Linux tree.
We we will maintain the code at: github.com/linux-netdev/mod-orphan
for anyone interested in playing with it.
Retain the uAPI for now. No strong reason, simply because I suspect
keeping it will be less controversial.
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20260615222935.947233-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
|
|
A few old machines have not been converted away from the old-style
gpiolib interfaces. Make these select the new CONFIG_GPIOLIB_LEGACY
symbol so the code still works where it is needed but can be left
out otherwise.
This is the list of all gpio_request() calls in mips:
arch/mips/alchemy/devboards/db1000.c: gpio_request(19, "sd0_cd");
arch/mips/alchemy/devboards/db1000.c: gpio_request(20, "sd1_cd");
arch/mips/alchemy/devboards/db1200.c: gpio_request(215, "otg-vbus");
arch/mips/bcm47xx/workarounds.c: err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
arch/mips/bcm63xx/boards/board_bcm963xx.c: gpio_request_one(board.ephy_reset_gpio,
arch/mips/txx9/rbtx4927/setup.c: gpio_request(15, "sio-dtr");
Most of these should be easy enough to change to modern gpio descriptors
or remove if they are no longer in use.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
After a recent change in binutils that warns when local symbols have
non-default visibility [1], there are a couple instances when building
arch/mips:
Assembler messages:
{standard input}: Warning: local symbol `__memset' has non-default visibility
Assembler messages:
{standard input}: Warning: local symbol `__memcpy' has non-default visibility
Remove the '.hidden' directives for these symbols to clear up the
warnings, as they are pointless with a local symbol, which is by
definition hidden. This results in no changes to these symbols in nm's
output when assembled with various copies of binutils.
Closes: https://lore.kernel.org/20260509122517.GA1108596@ax162/
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=c4150acbda1b3ce0602f79cbb7700b39e577be7e [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
After commit 2db1ec80dfd5 ("MIPS: VDSO: Fold MIPS_DISABLE_VDSO into
MIPS_GENERIC_GETTIMEOFDAY"), building ARCH=mips allnoconfig with LLVM=1
shows some warnings from llvm-readelf while checking the VDSO for
dynamic relocations:
llvm-readelf: warning: 'arch/mips/vdso/vdso.so.dbg.raw': invalid PT_DYNAMIC size (0xa4)
llvm-readelf: warning: 'arch/mips/vdso/vdso.so.dbg.raw': PT_DYNAMIC dynamic table is invalid: SHT_DYNAMIC will be used
The blamed commit alters the link order of objects into vdso.so.raw,
placing vgettimeofday.o after sigreturn.o. This ultimately results in
the .text section shrinking slightly in size, which in turn changes the
offset of the .dynamic section.
- [ 9] .text PROGBITS 000002f0 0002f0 000930 00 AX 0 0 16
- [10] .dynamic DYNAMIC 00000c20 000c20 000090 08 A 5 0 4
+ [ 9] .text PROGBITS 000002f0 0002f0 000924 00 AX 0 0 16
+ [10] .dynamic DYNAMIC 00000c14 000c14 000090 08 A 5 0 4
Changing the offset of the .dynamic section causes the dynamic segment
size to grow by the same amount, which triggers a warning in
llvm-readelf because PT_DYNAMIC's p_filesz (0xa4) is no longer a
multiple of its sh_entsize (8):
- DYNAMIC 0x000c20 0x00000c20 0x00000c20 0x00098 0x00098 R 0x10
+ DYNAMIC 0x000c14 0x00000c14 0x00000c14 0x000a4 0x000a4 R 0x10
The size of the dynamic segment was already incorrect before the blamed
comment, as it should be 0x90 like the .dynamic section above (18
entries at 8 bytes per entry); it just so happens that 0x98 % 8 is 0,
whereas 0xa4 % 8 is 4, so there was no warning.
Looking at the section to segment mapping of the dynamic segment reveals
that it includes the .got section, as it is implicitly placed after
.dynamic by ld.lld's orphan section heuristics and inherits its segments
from the linker script.
[ 9] .text PROGBITS 000002f0 0002f0 000924 00 AX 0 0 16
[10] .dynamic DYNAMIC 00000c14 000c14 000090 08 A 5 0 4
[11] .got PROGBITS 00000cb0 000cb0 000008 00 WAp 0 0 16
Section to Segment mapping:
Segment Sections...
00 .mips_abiflags
01 .reginfo
02 .mips_abiflags .reginfo .hash .dynsym .dynstr .gnu.version .gnu.version_d .note .text .dynamic .got
03 .dynamic .got
04 .note
Explicitly describe the .got section in the MIPS VDSO linker script
after .rodata, which switches back to the default text segment,
resulting in a dynamic segment that is the exact size of the .dynamic
section as expected with no other layout changes.
- DYNAMIC 0x000c14 0x00000c14 0x00000c14 0x000a4 0x000a4 R 0x10
+ DYNAMIC 0x000c14 0x00000c14 0x00000c14 0x00090 0x00090 R 0x4
- 03 .dynamic .got
+ 03 .dynamic
Closes: https://github.com/ClangBuiltLinux/linux/issues/2166
Fixes: 2db1ec80dfd5 ("MIPS: VDSO: Fold MIPS_DISABLE_VDSO into MIPS_GENERIC_GETTIMEOFDAY")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
smp_send_stop() parks all secondary CPUs in stop_this_cpu(). The function
marks the CPU offline for the scheduler via set_cpu_online(false) but
never informs RCU, so RCU keeps expecting a quiescent state from CPUs
that are now spinning forever with interrupts disabled.
As long as nothing waits for an RCU grace period after smp_send_stop()
this is harmless, which is why it went unnoticed. Since commit
91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT")
however, irq_work_sync() calls synchronize_rcu() on architectures without
an irq_work self-IPI, i.e. where arch_irq_work_has_interrupt() returns
false. That is the asm-generic default used by MIPS. Any irq_work_sync()
issued in the reboot/shutdown path after smp_send_stop() then blocks on
a grace period that can never complete, hanging the reboot:
WARNING: CPU: 0 PID: 15 at kernel/irq_work.c:144 irq_work_queue_on
...
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
rcu: Offline CPU 1 blocking current GP.
rcu: Offline CPU 2 blocking current GP.
rcu: Offline CPU 3 blocking current GP.
This issue was noticed on several Realtek MIPS switch SoCs (MIPS
interAptiv) and came up during kernel bump downstream in OpenWrt from
6.18.33 to 6.18.34, after the backport of the patch to the 6.18 stable
branch. The patch also has been backported all the way back to 6.1.
Call rcutree_report_cpu_dead() once interrupts are disabled, mirroring the
generic CPU-hotplug offline path, so RCU stops waiting on the parked CPUs
and grace periods can still complete. MIPS shuts down all CPUs here
without going through the CPU-hotplug mechanism, so this report is not
otherwise issued. Reporting a dying CPU to RCU outside the regular hotplug
offline path is not unprecedented: arm64 does the same in cpu_die_early().
There it is an exception for a CPU that was coming online and is aborting
bringup, rather than the default shutdown action as on MIPS.
Fixes: 91840be8f710 ("irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT")
CC: stable@vger.kernel.org
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Do not use curly brackets at one source code place
where a single statement should be sufficient.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Single characters should occasionally be put into a sequence.
Thus use the corresponding function “seq_putc”.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This patch addresses a critical memory management flaw. When
CONFIG_CPUMASK_OFFSTACK is enabled, cpumask_var_t is a pointer.
Consequently, sizeof(new_mask) evaluates to the pointer size, causing
copy_from_user() to clobber the mask pointer. Furthermore, the old
logic performed copy_from_user() before allocating the mask.
Fix this by allocating new_mask first. To handle variable-sized user
masks correctly, use cpumask_size() to truncate overly large user masks
or pad undersized masks with zeros before copying the data directly into
the allocated buffer.
Fixes: 295cbf6d63165 ("[MIPS] Move FPU affinity code into separate file.")
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
maar_res_walk() uses wi->num_cfg as the index into the fixed-size
wi->cfg array, but checks whether the array is full only after it has
filled the selected entry. If walk_system_ram_range() reports more than
16 memory ranges, the overflow call writes one struct maar_config past
the end of the array before WARN_ON() prevents num_cfg from advancing.
Move the full-array check before taking the array slot and return non-zero
when the scratch array is full, so walk_system_ram_range() terminates the
walk instead of invoking the callback for further ranges.
Fixes: a5718fe8f70f ("MIPS: mm: Drop boot_mem_map")
Signed-off-by: Yadan Fan <ydfan@suse.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Currently, ath79 SoCs use the default ARCH_DMA_MINALIGN value of 128
bytes defined in mach-generic. This is excessive for these platforms
and leads to significant memory waste in kmalloc.
Override ARCH_DMA_MINALIGN to use L1_CACHE_BYTES, which is 32 bytes for
ath79 SoCs.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fixes the following warning:
$nodename:0: 'wdt@18060008' does not match
'^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$'
from schema $id: http://devicetree.org/schemas/watchdog/qca,ar7130-wdt.yaml#
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Commit 1cea5180f2f8 ("block: remove pktcdvd driver") left behind some
CONFIG_CONFIG_CDROM_PKTCDVD references in defconfigs. Remove them.
Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
CMP support was removed in commit 7fb6f7b0af67 ("MIPS: Remove
deprecated CONFIG_MIPS_CMP"), but a comment referring to it remained in
arch/mips/mm/c-r4k.c. Remove it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull vdso updates from Thomas Gleixner:
- Remove the redundant CONFIG_GENERIC_TIME_VSYSCALL after converting
the remaining users over.
- Rework and sanitize the MIPS VDSO handling, so it does not handle the
time related VDSO if there is no VDSO capable clocksource available.
Also stop mapping VDSO data pages unconditionally even if there is no
usage possible.
* tag 'timers-vdso-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
MIPS: VDSO: Fold MIPS_CLOCK_VSYSCALL into MIPS_GENERIC_GETTIMEOFDAY
MIPS: VDSO: Gate microMIPS restriction on GCC version
MIPS: VDSO: Fold MIPS_DISABLE_VDSO into MIPS_GENERIC_GETTIMEOFDAY
clocksource/drivers/mips-gic-timer: Only use VDSO_CLOCKMODE_GIC when it is a available
MIPS: csrc-r4k: Only use VDSO_CLOCKMODE_R4K when it is a available
MIPS: VDSO: Only map the data pages when the vDSO is used
MIPS: Introduce Kconfig MIPS_GENERIC_GETTIMEOFDAY
vdso/datastore: Always provide symbol declarations
MAINTAINERS: Add include/linux/vdso_datastore.h to vDSO block
vdso/gettimeofday: Rename __arch_get_vdso_u_timens_data()
vdso/treewide: Drop GENERIC_TIME_VSYSCALL
vdso/vsyscall: Gate update_vsyscall() behind CONFIG_GENERIC_GETTIMEOFDAY
riscv: vdso: Drop CONFIG_GENERIC_TIME_VSYSCALL guard around syscall fallbacks
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Reduce pipe->mutex contention by pre-allocating pages outside the
lock in anon_pipe_write().
anon_pipe_write() called alloc_page() once per page while holding
pipe->mutex. The allocation can sleep doing direct reclaim and runs
memcg charging, which extends the critical section and stalls any
concurrent reader on the same mutex. Now up to 8 pages are
pre-allocated before the mutex is taken, leftovers are recycled
into the per-pipe tmp_page[] cache before unlock, and any remainder
is released after unlock, keeping the allocator out of the critical
section on both sides. On a writers x readers sweep with 64KB
writes against a 1 MB pipe throughput improves 6-28% and average
write latency drops 5-22%; under memory pressure - when the cost of
holding the mutex across reclaim is highest - throughput improves
21-48% and latency drops 17-33%. The microbenchmark is added to
selftests.
- uaccess/sockptr: fix the ignored_trailing logic in
copy_struct_to_user() to behave as documented and the usize check
in copy_struct_from_sockptr() for user pointers, and add
copy_struct_{from,to}_bounce_buffer() and copy_struct_to_sockptr()
helpers for upcoming users (IPPROTO_SMBDIRECT, IPPROTO_QUIC).
- bpf: add a sleepable bpf_real_inode() kfunc that resolves the real
inode backing a dentry via d_real_inode(). On overlayfs the inode
attached to the dentry doesn't carry the underlying device
information; this is used by the filesystem restriction BPF program
that was merged into systemd.
- docs: add guidelines for submitting new filesystems, motivated by
the maintenance burden abandoned and untestable filesystems impose
on VFS developers, blocking infrastructure work like folio
conversions and iomap migration.
Fixes:
- libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
and drop the now-redundant assignments in callers. This began as a
one-line dma-buf fix for a path_noexec() warning; a pseudo
filesystem has no reason not to set SB_I_NOEXEC. All init_pseudo()
callers were audited: the only visible effect is on dma-buf where
SB_I_NOEXEC silences the warning.
- Handle set_blocksize() failures in legacy filesystems (bfs, hpfs,
qnx4, jfs, befs, affs, isofs, minix, ntfs3, omfs). Mounting a
device with a sector size > PAGE_SIZE crashed roughly half of them;
the rest had the same missing error handling pattern. Plus a
follow-up releasing the superblock buffer_head when setting the
minix v3 block size fails.
- mount: honour SB_NOUSER in the new mount API.
- fs/fcntl: fix a SOFTIRQ-unsafe lock order in fasync signaling by
switching the process-group paths of send_sigio() and send_sigurg()
from read_lock(&tasklist_lock) to RCU, matching the single-PID
path.
- vfs: add an FS_USERNS_DELEGATABLE flag and set it for NFS, fixing
delegated NFS mounts (fsopen() in a container with the mount
performed by a privileged daemon) that broke when non-init
s_user_ns was tied to FS_USERNS_MOUNT.
- selftests/namespaces: fix a hang in nsid_test where an unreaped
grandchild kept the TAP pipe write-end open, a waitpid(-1) race in
listns_efault_test, and a false FAIL on kernels without listns()
where the tests should SKIP.
- filelock: fix the break_lease() stub signature for
CONFIG_FILE_LOCKING=n.
- init/initramfs_test: wait for the async initramfs unpacking before
running; the test and do_populate_rootfs() share the parser state.
- fs/coredump: reduce redundant log noise in
validate_coredump_safety().
- iomap: pass the correct length to fserror_report_io() in
__iomap_write_begin().
- backing-file: fix the backing_file_open() kerneldoc.
Cleanups:
- initramfs: refactor the cpio hex header parsing to use hex2bin()
instead of the hand-rolled simple_strntoul() which is reverted, and
extend the initramfs KUnit tests to cover header fields with 0x
prefixes.
- Replace __get_free_pages() and friends with kmalloc()/kzalloc()
across quota, proc, ocfs2/dlm, nilfs2, nfs, nfsd, libfs, jfs, jbd2,
isofs, fuse, select, namespace, configfs, binfmt_misc, bfs, and the
do_mounts init code - part of the larger work of replacing page
allocator calls with kmalloc().
- Use clear_and_wake_up_bit() in unlock_buffer() and
journal_end_buffer_io_sync() instead of open-coding the sequence.
- Drop unused VFS exports: unexport drop_super_exclusive(), remove
start_removing_user_path_at(), and fold __start_removing_path()
into start_removing_path().
- fs/read_write: narrow the __kernel_write() export with
EXPORT_SYMBOL_FOR_MODULES().
- vfs: uapi: retire octal and hex constants in favor of (1 << n) for
the O_ flags. Finding a free bit for a new flag across the
architectures was needlessly hard with the mixed bases.
- dcache: add extra sanity checks of dead dentries in dentry_free()
via a new DENTRY_WARN_ONCE() that also prints d_flags.
- iov_iter: use kmemdup_array() in dup_iter() to harden the
allocation against multiplication overflow.
- fs/pipe: write to ->poll_usage only once.
- vfs: remove an always-taken if-branch in find_next_fd().
- dcache: use kmalloc_flex() for struct external_name in __d_alloc().
- namei: use QSTR() instead of QSTR_INIT() in path_pts().
- sync_file_range: delete dead S_ISLNK code.
- Comment fixes: retire a stale comment in fget_task_next() and fix
assorted spelling mistakes"
* tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (73 commits)
backing-file: fix backing_file_open() kerneldoc parameter
iomap: pass the correct len to fserror_report_io in __iomap_write_begin
vfs: add FS_USERNS_DELEGATABLE flag and set it for NFS
filelock: fix break_lease() stub signature for CONFIG_FILE_LOCKING=n
vfs: uapi: retire octal and hex numbers in favor of (1 << n) for O_ flags
bpf: add bpf_real_inode() kfunc
fs/read_write: Do not export __kernel_write() to the entire world
libfs: drop redundant SB_I_NOEXEC/SB_I_NODEV in init_pseudo() callers
libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
mount: honour SB_NOUSER in the new mount API
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
selftests/pipe: add pipe_bench microbenchmark
fs/pipe: pre-allocate pages outside pipe->mutex in anon_pipe_write
fs: retire stale comment in fget_task_next()
fs: fix spelling mistakes in comment
bfs: replace get_zeroed_page() with kzalloc()
binfmt_misc: replace __get_free_page() with kmalloc()
configfs: replace __get_free_pages() with kzalloc()
fs/namespace: use __getname() to allocate mntpath buffer
fs/select: replace __get_free_page() with kmalloc()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull openat2 updates from Christian Brauner:
"Features:
- Add O_EMPTYPATH to openat(2)/openat2(2). To get an operable file
descriptor from an O_PATH file descriptor it is possible to use
openat(fd, ".", O_DIRECTORY) for directories, but other file types
require going through open("/proc/<pid>/fd/<nr>") and thus depend
on a functioning procfs.
With O_EMPTYPATH an empty path string is accepted and LOOKUP_EMPTY
is set at path resolution time, allowing to reopen the file behind
the file descriptor directly. Selftests are included.
- Add an OPENAT2_REGULAR flag for openat2(2) which refuses to open
anything but regular files with the new EFTYPE error code.
This implements the "ability to only open regular files" feature
requested by userspace via uapi-group.org and protects services
from being redirected to fifos, device nodes, and friends.
All atomic_open implementations were audited for OPENAT2_REGULAR
handling. Explicit checks were added to ceph, gfs2, nfs (v4), and
cifs/smb - these are the filesystems whose atomic_open can
encounter an existing non-regular file and would otherwise call
finish_open() on it or return a misleading error code.
The remaining implementations (9p, fuse, vboxsf, nfs v2/v3) only
call finish_open() on freshly created files and use
finish_no_open() for lookup hits, letting the VFS catch non-regular
files via the do_open() safety net.
Cleanups:
- Migrate the openat2 selftests to the kselftest harness and move
them under selftests/filesystems/. The tests were written in the
early days of selftests' TAP support and the modern kselftest
harness is much easier to follow and maintain. The contents of the
tests are unchanged and the new emptypath tests are ported on top.
- Make the LAST_XXX last-type constants private to fs/namei.c. The
only user outside of fs/namei.c was ksmbd which only needs to know
whether the last component is a regular one, so
vfs_path_parent_lookup() now performs the LAST_NORM check
internally. The ints are replaced with a dedicated enum last_type"
* tag 'vfs-7.2-rc1.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: replace ints with enum last_type for LAST_XXX
vfs: make LAST_XXX private to fs/namei.c
selftests: openat2: port emptypath_test to kselftest harness
kselftest/openat2: test for OPENAT2_REGULAR flag
openat2: new OPENAT2_REGULAR flag support
openat2: introduce EFTYPE error code
selftest: add tests for O_EMPTYPATH
vfs: add O_EMPTYPATH to openat(2)/openat2(2)
selftests: openat2: migrate to kselftest harness
selftests: openat2: switch from custom ARRAY_LEN to ARRAY_SIZE
selftests: openat2: move helpers to header
selftests: move openat2 tests to selftests/filesystems/
|
|
PCMCIA is almost completely obsolete (the last computers supporting it
natively were from ~2009), and the general consensus [1] seems to be
that support for it should be gradually removed from the kernel.
In 2023, an initial step of removing all the PCMCIA char drivers was
taken in commit 9b12f050c76f ("char: pcmcia: remove all the drivers"),
and that has not been reverted, so it seems logical to continue this
process by removing more low-hanging fruit.
These three Bluetooth drivers have had no meaningful changes since
their status was discussed in 2022 [2], and are unlikely to have any
remaining users. The latest functional change to any of them was a
patch to bluecard_cs to fix LED blinking behavior in 2017. The other
two drivers have not had any meaningful changes made since 2007. Remove
them.
Note that even with these drivers removed, it is still possible to use
other PCMCIA Bluetooth cards that present themselves as a standard
serial port via serial_cs and hciattach while the serial_cs driver is
still present.
[1] https://lore.kernel.org/all/c5b39544-a4fb-4796-a046-0b9be9853787@app.fastmail.com/
[2] https://lore.kernel.org/all/Y07d7rMvd5++85BJ@owl.dominikbrodowski.net/
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The only user of PCBC mode (Propagating Cipher Block Chaining mode) was
net/rxrpc/rxkad.c, which now uses local code instead.
While PCBC was an interesting cryptographic experiment, it has largely
been relegated to the history books and academic exercises. It is
non-parallelizable (i.e., very slow) and doesn't actually achieve the
integrity properties it was apparently intended to achieve.
Remove support for it from the crypto API.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-6-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the insecure FCrypt block cipher from the crypto API. Its only
user was net/rxrpc/, but now net/rxrpc/ implements it locally. The
crypto API implementation is no longer needed.
For some additional context: FCrypt was designed in 1988 and is
essentially a weakened version of DES. It has the same 56-bit key size
as DES, which is easily brute forced. Moreover, it's cryptographically
weak and doesn't even provide the intended 56-bit security level. Its
author considers it to be a mistake, as well
(https://lists.openafs.org/pipermail/openafs-devel/2000-December/005320.html).
But fortunately this 1980s-era homebrew block cipher was never adopted
outside of net/rxrpc/. So its code can just be kept there.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260522050740.84561-5-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This configuration option exists so "that we don't provide the symbol
when there's no possibility of there being a usable clocksource".
However it only covers __vdso_gettimeofday() and none of the other vDSO
functions which should be affected by the same circumstances.slightly slightly.
Remove MIPS_CLOCK_VSYSCALL and fold its usecase into
MIPS_GENERIC_GETTIMEOFDAY, which works correctly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Daniel Lezcano <daniel.lezcano@kernel.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://patch.msgid.link/20260521-vdso-mips-kconfig-v1-9-2f79dcd6c78f@linutronix.de
|
|
As explained in the comment, the problematic GOT references are only
emitted by old versions of GCC.
Limit the restriction to those compilers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://patch.msgid.link/20260521-vdso-mips-kconfig-v1-8-2f79dcd6c78f@linutronix.de
|
|
The currently used MIPS_DISABLE_VDSO will disable only the userspace
bits of the time-related vDSO. The kernel part is still pointlessly
built and running.
Remove MIPS_DISABLE_VDSO and fold its usecase into
MIPS_GENERIC_GETTIMEOFDAY, which works correctly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Daniel Lezcano <daniel.lezcano@kernel.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://patch.msgid.link/20260521-vdso-mips-kconfig-v1-7-2f79dcd6c78f@linutronix.de
|
|
VDSO_CLOCKMODE_R4K is only defined if CONFIG_GENERIC_GETTIMEOFDAY is
enabled. Right now this is always the case, but it will change soon.
Prepare for the potential unavailability of VDSO_CLOCKMODE_R4K.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://patch.msgid.link/20260521-vdso-mips-kconfig-v1-5-2f79dcd6c78f@linutronix.de
|
|
A recent build failure[1] exposed the diffculty of working with the
current octal and hex definitions of O_ flags when trying to find a gap
for a new flag. This difficulty is compounded by the fact that O_ flags
may have architectural specific values.
Replace the hex/octal #defines, which are hard to parse when looking for
free bits, with explicit bit shifts like (1 << 11). Also, add comments
that identify which architectures redefine some of the seemingly free
("cursed") bits in uapi/asm-generic/fcntl.h. These should not be used to
define new O_ flags (for now, at least).
The translastion was done with Claude Opus 4.8, and verified with a
(non-AI) gawk script. The accounting of which architectures claim
which bit-gaps in uapi/asm-generic/fcntl.h is also done by hand.
[1]: https://lore.kernel.org/all/agruPPybCx8q2XcJ@sirena.org.uk/
Assisted-by: Claude:Opus 4.8
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260604222405.5382-1-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc7).
Silent conflicts:
net/wireless/nl80211.c
cb9959ab5f99 ("wifi: cfg80211: enforce HE/EHT cap/oper consistency")
a384ae969902 ("wifi: cfg80211: move AP HT/VHT/... operation to beacon info")
https://lore.kernel.org/aiGJDaHV4UlCexIQ@sirena.org.uk
Conflicts:
drivers/net/wireless/intel/iwlwifi/mld/ap.c
a342c99cb70d ("wifi: iwlwifi: mld: honor BSS_CHANGED_BEACON_ENABLED")
9bf1b409afc7 ("wifi: iwlwifi: mld: send tx power constraints before link activation")
https://lore.kernel.org/ah2bfedhV45ZxMO8@sirena.org.uk
drivers/net/wireless/intel/iwlwifi/pcie/drv.c
093305d801fa ("wifi: iwlwifi: pcie: simplify the resume flow if fast resume is not used")
e2323929a68a ("wifi: iwlwifi: pcie: add debug print for resume flow if powered off")
https://lore.kernel.org/ah2bfedhV45ZxMO8@sirena.org.uk
Adjacent changes:
drivers/net/ethernet/airoha/airoha_eth.c
b38cae85d1c4 ("net: airoha: Fix use-after-free in metadata dst teardown")
ec6c391bcca7 ("net: airoha: Introduce airoha_gdm_dev struct")
drivers/net/ethernet/microchip/lan743x_main.c
8173d22b211f ("net: lan743x: permit VLAN-tagged packets up to configured MTU")
e3c6508a46f5 ("net: lan743x: avoid netdev-based logging before netdev registration")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A future change will make it possible to disable the time-related vDSO.
In that case there is no point in calling into the datastore.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://patch.msgid.link/20260521-vdso-mips-kconfig-v1-4-2f79dcd6c78f@linutronix.de
|
|
The logic to enable the generic vDSO Kconfig symbols is about to become
more complex.
Introduce a new helper symbol to keep the configuration readable.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://patch.msgid.link/20260521-vdso-mips-kconfig-v1-3-2f79dcd6c78f@linutronix.de
|
|
This Kconfig symbol is not used anymore, remove it.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260519-vdso-generic_time_vsyscal-v1-3-5c2a5905d5f5@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 7.1-rc6. Included in here
are:
- mips serial driver fixes to resolve some long-standing issues with
how they interacted with the console. That's the "majority" of the
changes in this merge request
- sh-sci driver regression fix
- 8250 driver regression fixes
- other small serial driver fixes for reported problems.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: dz: Enable modular build
serial: zs: Convert to use a platform device
serial: dz: Convert to use a platform device
serial: zs: Switch to using channel reset
serial: zs: Fix bootconsole handover lockup
serial: dz: Fix bootconsole handover lockup
serial: dz: Fix bootconsole message clobbering at chip reset
serial: 8250_dw: dispatch SysRq character in dw8250_handle_irq()
serial: 8250: dispatch SysRq character in serial8250_handle_irq()
serial: core: introduce guard(uart_port_lock_check_sysrq_irqsave)
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
serial: altera_jtaguart: handle uart_add_one_port() failures
serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ
serial: fsl_lpuart: fix rx buffer and DMA map leaks in start_rx_dma
tty: add missing tty_driver include to tty_port.h
serial: qcom-geni: fix UART_RX_PAR_EN bit position
serial: sh-sci: fix memory region release in error path
tty: serial: pch_uart: add check for dma_alloc_coherent()
serial: zs: Fix swapped RI/DSR modem line transition counting
|
|
The kernel allows arches to select between inline and outline
implementations of the copy_{from,to}_user() by defining individual
INLINE_COPY_FROM_USER and INLINE_COPY_TO_USER, correspondingly. However,
all arches enable or disable them always together.
Without the real use-case for one helper being inlined while the other
outlined, having independent controls is excessive and error prone.
Switch the codebase to the single unified INLINE_COPY_USER control.
Link: https://lore.kernel.org/20260425020857.356850-3-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Architectures may have bit reversal instructions, but if the API not
needed, the corresponding option should not be selected because it may
lead to generating the unneeded code.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
Convert "5way switch" gpio-keys device and smsc911x ethernet controller
to use static device properties instead of bespoke platform data
structures for configuration.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[Bartosz: use platform_device_info::swnode]
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Convert I2C-gpio device and GPIO-connected LEDs on GPR board to software
nodes/properties, so that support for platform data can be removed from
gpio-leds driver (which will rely purely on generic device properties
for configuration).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[Bartosz: use platform_device_info::swnode]
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
GPIO subsystem is switching the way it locates GPIO chip instances for
GPIO references in software nodes by doing identity matching instead of
matching on node names. Switch to using software nodes attached to gpio
chips instead of using freestanding software nodes.
Also stop supplying platform data for the spi-gpio controller since
spi-gpio driver can derive number of chipselect lines from device
properties.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
GPIO subsystem is switching the way it locates GPIO chip instances for
GPIO references in software nodes from matching on node names to
identity matching, which necessitates assigning firmware nodes
(software nodes) to GPIO chips.
Move the node definitions for alchemy-gpio1 and alchemy-gpio2 to
arch/misp/alchemy/common/gpiolib.c, register them there, and attach
them to gpio_chip instances. Adjust MTX1 board file to use these nodes.
Note that because nodes need to be registered before they can be used in
PROPERTY_ENTRY_GPIO() we have to do the registration at
postcore_initcall level, otherwise (due to the link order) MTX1 board
initialization code will run first.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[Bartosz: use platform_device_info::swnode]
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
