| Age | Commit message (Collapse) | Author |
|---|
|
Remove the "p8_ghash" crypto_shash algorithm. Move the corresponding
assembly code into lib/crypto/, and wire it up to the GHASH library.
This makes the GHASH library be optimized for POWER8. It also greatly
reduces the amount of powerpc-specific glue code that is needed, and it
fixes the issue where this optimized GHASH code was disabled by default.
Note that previously the C code defined the POWER8 GHASH key format as
"u128 htable[16]", despite the assembly code only using four entries.
Fix the C code to use the correct key format. To fulfill the library
API contract, also make the key preparation work in all contexts.
Note that the POWER8 assembly code takes the accumulator in GHASH
format, but it actually byte-reflects it to get it into POLYVAL format.
The library already works with POLYVAL natively. For now, just wire up
this existing code by converting it to/from GHASH format in C code.
This should be cleaned up to eliminate the unnecessary conversion later.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260319061723.1140720-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Move the PowerPC SPE AES assembly code into lib/crypto/, wire the key
expansion and single-block en/decryption functions up to the AES library
API, and remove the superseded "aes-ppc-spe" crypto_cipher algorithm.
The result is that both the AES library and crypto_cipher APIs are now
optimized with SPE, whereas previously only crypto_cipher was (and
optimizations weren't enabled by default, which this commit fixes too).
Note that many of the functions in the PowerPC SPE assembly code are
still used by the AES mode implementations in arch/powerpc/crypto/. For
now, just export these functions. These exports will go away once the
AES modes are migrated to the library as well. (Trying to split up the
assembly files seemed like much more trouble than it would be worth.)
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Reorganize the Curve25519 library code:
- Build a single libcurve25519 module, instead of up to three modules:
libcurve25519, libcurve25519-generic, and an arch-specific module.
- Move the arch-specific Curve25519 code from arch/$(SRCARCH)/crypto/ to
lib/crypto/$(SRCARCH)/. Centralize the build rules into
lib/crypto/Makefile and lib/crypto/Kconfig.
- Include the arch-specific code directly in lib/crypto/curve25519.c via
a header, rather than using a separate .c file.
- Eliminate the entanglement with CRYPTO. CRYPTO_LIB_CURVE25519 no
longer selects CRYPTO, and the arch-specific Curve25519 code no longer
depends on CRYPTO.
This brings Curve25519 in line with the latest conventions for
lib/crypto/, used by other algorithms. The exception is that I kept the
generic code in separate translation units for now. (Some of the
function names collide between the x86 and generic Curve25519 code. And
the Curve25519 functions are very long anyway, so inlining doesn't
matter as much for Curve25519 as it does for some other algorithms.)
Link: https://lore.kernel.org/r/20250906213523.84915-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Curve25519 is used only via the library API, not the crypto_kpp API. In
preparation for removing the unused crypto_kpp API for Curve25519,
remove the unused "curve25519-ppc64le" kpp algorithm.
Note that the underlying PowerPC optimized Curve25519 code remains fully
supported and accessible via the library API.
It's also worth noting that even if the kpp support for Curve25519 comes
back later, there is no need for arch-specific kpp glue code like this,
as a single kpp algorithm that wraps the library API is sufficient.
Link: https://lore.kernel.org/r/20250906213523.84915-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Instead of exposing the powerpc-optimized MD5 code via powerpc-specific
crypto_shash algorithms, instead just implement the md5_blocks() library
function. This is much simpler, it makes the MD5 library functions be
powerpc-optimized, and it fixes the longstanding issue where the
powerpc-optimized MD5 code was disabled by default. MD5 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Link: https://lore.kernel.org/r/20250805222855.10362-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Instead of exposing the powerpc-optimized SHA-1 code via
powerpc-specific crypto_shash algorithms, instead just implement the
sha1_blocks() library function. This is much simpler, it makes the
SHA-1 library functions be powerpc-optimized, and it fixes the
longstanding issue where the powerpc-optimized SHA-1 code was disabled
by default. SHA-1 still remains available through crypto_shash, but
individual architectures no longer need to handle it.
Note: to see the diff from arch/powerpc/crypto/sha1-spe-glue.c to
lib/crypto/powerpc/sha1.h, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250712232329.818226-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Instead of providing crypto_shash algorithms for the arch-optimized
SHA-256 code, instead implement the SHA-256 library. This is much
simpler, it makes the SHA-256 library functions be arch-optimized, and
it fixes the longstanding issue where the arch-optimized SHA-256 was
disabled by default. SHA-256 still remains available through
crypto_shash, but individual architectures no longer need to handle it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Continue disentangling the crypto library functions from the generic
crypto infrastructure by moving the powerpc ChaCha and Poly1305 library
functions into a new directory arch/powerpc/lib/crypto/ that does not
depend on CRYPTO. This mirrors the distinction between crypto/ and
lib/crypto/.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
arch/powerpc/crypto/Kconfig is sourced only when CONFIG_PPC=y, so there
is no need for the symbols defined inside it to depend on PPC.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Currently the Power10 optimized Poly1305 is only wired up to the
crypto_shash API, which makes it unavailable to users of the library
API. The crypto_shash API for Poly1305 is going to change to be
implemented on top of the library API, so the library API needs to be
supported. And of course it's needed anyway to serve the library users.
Therefore, change the Power10 optimized Poly1305 code to implement the
library API instead of the crypto_shash API.
Cc: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Since crypto/chacha.c now registers chacha20-$(ARCH), xchacha20-$(ARCH),
and xchacha12-$(ARCH) skcipher algorithms that use the architecture's
ChaCha and HChaCha library functions, individual architectures no longer
need to do the same. Therefore, remove the redundant skcipher
algorithms and leave just the library functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ARCH_MAY_HAVE patch missed arm64, mips and s390. But it may
also lead to arch options being enabled but ineffective because
of modular/built-in conflicts.
As the primary user of all these options wireguard is selecting
the arch options anyway, make the same selections at the lib/crypto
option level and hide the arch options from the user.
Instead of selecting them centrally from lib/crypto, simply set
the default of each arch option as suggested by Eric Biggers.
Change the Crypto API generic algorithms to select the top-level
lib/crypto options instead of the generic one as otherwise there
is no way to enable the arch options (Eric Biggers). Introduce a
set of INTERNAL options to work around dependency cycles on the
CONFIG_CRYPTO symbol.
Fixes: 1047e21aecdf ("crypto: lib/Kconfig - Fix lib built-in failure when arch is modular")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Arnd Bergmann <arnd@kernel.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202502232152.JC84YDLp-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The HAVE_ARCH Kconfig options in lib/crypto try to solve the
modular versus built-in problem, but it still fails when the
the LIB option (e.g., CRYPTO_LIB_CURVE25519) is selected externally.
Fix this by introducing a level of indirection with ARCH_MAY_HAVE
Kconfig options, these then go on to select the ARCH_HAVE options
if the ARCH Kconfig options matches that of the LIB option.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501230223.ikroNDr1-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Delete crc-vpmsum_test.c, since its functionality is now covered by the
new crc_kunit.c as well as the crypto subsystem's fuzz tests.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Vinicius Peixoto <vpeixoto@lkcamp.dev>
Link: https://lore.kernel.org/r/20241202012056.209768-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Move the powerpc CRC-T10DIF assembly code into the lib directory and
wire it up to the library interface. This allows it to be used without
going through the crypto API. It remains usable via the crypto API too
via the shash algorithms that use the library interface. Thus all the
arch-specific "shash" code becomes unnecessary and is removed.
Note: to see the diff from arch/powerpc/crypto/crct10dif-vpmsum_glue.c
to arch/powerpc/lib/crc-t10dif-glue.c, view this commit with
'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241202012056.209768-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Move the powerpc CRC32C assembly code into the lib directory and wire it
up to the library interface. This allows it to be used without going
through the crypto API. It remains usable via the crypto API too via
the shash algorithms that use the library interface. Thus all the
arch-specific "shash" code becomes unnecessary and is removed.
Note: to see the diff from arch/powerpc/crypto/crc32c-vpmsum_glue.c to
arch/powerpc/lib/crc32-glue.c, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20241202010844.144356-9-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
CRYPTO_AES_GCM_P10
Added CRYPTO_SIMD for CRYPTO_AES_GCM_P10.
Fixes: 45a4672b9a6e ("crypto: p10-aes-gcm - Update Kconfig and Makefile")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Data mismatch found when testing ipsec tunnel with AES/GCM crypto.
Disabling CRYPTO_AES_GCM_P10 in Kconfig for this feature.
Fixes: fd0e9b3e2ee6 ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
Fixes: cdcecfd9991f ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
Fixes: 45a4672b9a6e2 ("crypto: p10-aes-gcm - Update Kconfig and Makefile")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Defined CRYPTO_CURVE25519_PPC64 to support X25519 for ppc64le.
Added new module curve25519-ppc64le for X25519.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Relocate all crypto files in vmx driver to arch/powerpc/crypto directory
and remove vmx directory.
drivers/crypto/vmx/aes.c rename to arch/powerpc/crypto/aes.c
drivers/crypto/vmx/aes_cbc.c rename to arch/powerpc/crypto/aes_cbc.c
drivers/crypto/vmx/aes_ctr.c rename to arch/powerpc/crypto/aes_ctr.c
drivers/crypto/vmx/aes_xts.c rename to arch/powerpc/crypto/aes_xts.c
drivers/crypto/vmx/aesp8-ppc.h rename to arch/powerpc/crypto/aesp8-ppc.h
drivers/crypto/vmx/aesp8-ppc.pl rename to arch/powerpc/crypto/aesp8-ppc.pl
drivers/crypto/vmx/ghash.c rename to arch/powerpc/crypto/ghash.c
drivers/crypto/vmx/ghashp8-ppc.pl rename to arch/powerpc/crypto/ghashp8-ppc.pl
drivers/crypto/vmx/vmx.c rename to arch/powerpc/crypto/vmx.c
deleted files:
drivers/crypto/vmx/Makefile
drivers/crypto/vmx/Kconfig
drivers/crypto/vmx/ppc-xlate.pl
This patch has been tested has passed the selftest. The patch is also tested with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a random config build failure on powerpc"
* tag 'v6.6-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: powerpc/chacha20,poly1305-p10 - Add dependency on VSX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
|
|
Add dependency on VSX as otherwise the build will fail without
it.
Fixes: 161fca7e3e90 ("crypto: powerpc - Add chacha20/poly1305-p10 to Kconfig and Makefile")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308251906.SYawej6g-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
None of the other accelerated crypto modules are built by default.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/40d9c7ebe82c9a9d4ace542ac433753d2f22c6a0.1689007370.git.osandov@osandov.com
|
|
My stripped down configuration fails to build with:
ERROR: modpost: "skcipher_walk_aead_encrypt" [arch/powerpc/crypto/aes-gcm-p10-crypto.ko] undefined!
ERROR: modpost: "skcipher_walk_done" [arch/powerpc/crypto/aes-gcm-p10-crypto.ko] undefined!
ERROR: modpost: "skcipher_walk_aead_decrypt" [arch/powerpc/crypto/aes-gcm-p10-crypto.ko] undefined!
Fix it by selecting CRYPTO_SKCIPHER.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c55ad70799e027a3d2756b85ccadc0af52ae8915.1689007370.git.osandov@osandov.com
|
|
Defined CRYPTO_CHACHA20_P10 and CRYPTO POLY1305_P10 in Kconfig to
support optimized implementation for Power10 and later CPU.
Added new module driver chacha-p10-crypto and poly1305-p10-crypto.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When VSX is disabled, eg. microwatt_defconfig, the build fails with:
In function ‘enable_kernel_vsx’,
inlined from ‘vsx_begin’ at arch/powerpc/crypto/aes-gcm-p10-glue.c:68:2,
inlined from ‘p10_aes_gcm_crypt.constprop’ at arch/powerpc/crypto/aes-gcm-p10-glue.c:244:2:
...
arch/powerpc/include/asm/switch_to.h:86:9: note: in expansion of macro ‘BUILD_BUG’
86 | BUILD_BUG();
| ^~~~~~~~~
Fix it by making the p10-aes-gcm code depend on VSX.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230515124731.122962-1-mpe%40ellerman.id.au
|
|
Remove Power10 dependency in Kconfig and detect Power10 feature at runtime.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Defined CRYPTO_AES_GCM_P10 in Kconfig to support AES/GCM
stitched implementation for Power10 or later CPU.
Added a new module driver aes-gcm-p10-crypto.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Shorten menu titles and make them consistent:
- acronym
- name
- architecture features in parenthesis
- no suffixes like "<something> algorithm", "support", or
"hardware acceleration", or "optimized"
Simplify help text descriptions, update references, and ensure that
https references are still valid.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
