| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
Counter updates for 7.3
Remove superfluous dev_err() and dev_err_probe() calls from
stm32-timer-cnt, ti-eqep, and ti-ecap-capture now that
devm_request_irq() and devm_request_threaded_irq() automatically
log error messages on failure.
* tag 'counter-updates-for-7.3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: ti-eqep: Remove redundant dev_err_probe()
counter: ti-ecap-capture: Remove redundant dev_err_probe()
counter: stm32-timer-cnt: Remove redundant dev_err()
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus
William writes:
Counter fixes for 7.2
A fix for microchip-tcb-capture to read the devicetree "reg" cell into a
u32 variable to match the expected data type.
* tag 'counter-fixes-for-7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: microchip-tcb-capture: Fix DT channel validation
|
|
devm_request_threaded_irq() automatically logs detailed error messages
on failure. Remove the now-redundant driver-specific dev_err_probe()
call.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20260715135030.326290-4-panchuang@vivo.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
devm_request_irq() automatically logs detailed error messages on
failure. Remove the now-redundant driver-specific dev_err_probe() call.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260715135030.326290-3-panchuang@vivo.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
devm_request_irq() automatically logs detailed error messages on
failure. Remove the now-redundant driver-specific dev_err() calls.
Signed-off-by: Pan Chuang <panchuang@vivo.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260715135030.326290-2-panchuang@vivo.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
mchp_tc_probe() reads the devicetree "reg" cell - a u32, per the API
contract of of_property_read_u32_index() - into a signed int, so the
bounds check "channel > 2" fails to reject cell values at or above
0x80000000: reinterpreted as a negative int, they compare below 2 and
pass validation.
A malformed devicetree can therefore drive a negative channel into the
ATMEL_TC_REG() offset arithmetic, making the driver access syscon
regmap offsets outside the TC block's register window, and into the
"t%d_clk" clock-name formatting, where it truncates clk_name (sized
for "t0_clk".."t2_clk").
Declare channel as u32, matching the API contract; the unsigned
comparison then rejects everything except channels 0..2. Adjust the
format specifier to %u accordingly, which also resolves the W=1
warning that exposed the gap:
microchip-tcb-capture.c:520:56: warning: '%d' directive output may
be truncated writing between 1 and 11 bytes into a region of size
6 [-Wformat-truncation=]
note: directive argument in the range [-2147483648, 2]
No behavior change for well-formed devicetrees: channels 0..2 take
identical paths before and after.
Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
Assisted-by: Claude:claude-fable-5 [gcc W=1]
Signed-off-by: Babanpreet Singh <bbnpreetsingh@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260714042910.7-1-bbnpreetsingh@gmail.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
Counter updates for 7.2
Manual mutex lock logic is replaced by lock guards in intel-qep.
Additionally, devm_mutex_init() is now used in ftm-quaddec,
interrupt-cnt, and intel-qep to handle mutex cleanup automatically.
* tag 'counter-updates-for-7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: intel-qep: Use devm_mutex_init()
counter: interrupt-cnt: use devm_mutex_init()
counter: ftm-quaddec: use devm_mutex_init()
counter: intel-qep: Replace manual mutex logic with lock guards
|
|
intel_qep_probe() calls mutex_init() but lacks the pairing
mutex_destroy() calls. Convert to devm_mutex_init() which handles
cleanup automatically.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Reviewed-by: Stepan Ionichev <sozdayvek@gmail.com>
Link: https://lore.kernel.org/r/20260520111813.3934-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
interrupt_cnt_probe() calls mutex_init() but neither this driver
nor the counter core issues a matching mutex_destroy() on unbind,
so the lock debug state is leaked.
Switch to devm_mutex_init() so the mutex is torn down in the same
devm scope it was set up in.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260523184418.7586-1-sozdayvek@gmail.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
ftm_quaddec_probe() calls mutex_init() but neither the cleanup
action nor a remove callback issues a matching mutex_destroy(),
so the lock debug state is leaked on driver unbind.
Switch to devm_mutex_init() so the mutex is torn down in the same
devm scope it was set up in.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://lore.kernel.org/r/20260523184351.7567-1-sozdayvek@gmail.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Use guard() for handling mutex lock instead of locking and unlocking
mutex explicitly. This improves readability by eliminating the need for
gotos and by clearly indicating mutex will be locked only when
execution is in guard scope.
Signed-off-by: Joao Paulo Menezes Linaris <jplinaris@usp.br>
Co-developed-by: Guilherme Dias <guilhermeabreu200105@usp.br>
Signed-off-by: Guilherme Dias <guilhermeabreu200105@usp.br>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20260512173058.14858-1-jplinaris@usp.br
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
After device_initialize(), the lifetime of the embedded struct device
is expected to be managed through the device core reference counting.
In counter_alloc(), if dev_set_name() fails after device_initialize(),
the error path removes the chrdev, frees the ID, and frees the backing
allocation directly instead of releasing the device reference with
put_device(). This bypasses the normal device lifetime rules and may
leave the reference count of the embedded struct device unbalanced,
resulting in a refcount leak.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fix this by using put_device() in the dev_set_name() failure path and
let counter_device_release() handle the final cleanup.
Fixes: 4da08477ea1f ("counter: Set counter device name")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://lore.kernel.org/r/20260413134604.2861772-1-lgs201920130244@gmail.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
We need the char/misc/iio/comedi fixes in here as well for testing
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The counter driver can use HW channels 1 and 2, while the PWM driver can
use HW channels 0, 1, 2, 3, 4, 6, 7.
The dev member is assigned both by the counter driver and the PWM driver
for channels 1 and 2, to their own struct device instance, overwriting
the previous value.
The sub-drivers race to assign their own struct device pointer to the
same struct rz_mtu3_channel's dev member.
The dev member of struct rz_mtu3_channel is used by the counter
sub-driver for runtime PM.
Depending on the probe order of the counter and PWM sub-drivers, the
dev member may point to the wrong struct device instance, causing the
counter sub-driver to do runtime PM actions on the wrong device.
To fix this, use the parent pointer of the counter, which is assigned
during probe to the correct struct device, not the struct device pointer
inside the shared struct rz_mtu3_channel.
Cc: stable@vger.kernel.org
Fixes: 0be8907359df ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Link: https://lore.kernel.org/r/20260130122353.2263273-6-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Runtime PM counter is incremented / decremented each time the sysfs
enable file is written to.
If user writes 0 to the sysfs enable file multiple times, runtime PM
usage count underflows, generating the following message.
rz-mtu3-counter rz-mtu3-counter.0: Runtime PM usage count underflow!
At the same time, hardware registers end up being accessed with clocks
off in rz_mtu3_terminate_counter() to disable an already disabled
channel.
If user writes 1 to the sysfs enable file multiple times, runtime PM
usage count will be incremented each time, requiring the same number of
0 writes to get it back to 0.
If user writes 0 to the sysfs enable file while PWM is in progress, PWM
is stopped without counter being the owner of the underlying MTU3
channel.
Check against the cached count_is_enabled value and exit if the user
is trying to set the same enable value.
Cc: stable@vger.kernel.org
Fixes: 0be8907359df ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Link: https://lore.kernel.org/r/20260130122353.2263273-5-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
sysfs attribute creation for counter extensions has been consolidated
into a single function, counter_sysfs_exts_add().
Inside counter_sysfs_attr_add(), although the code was changed to return
the result of counter_sysfs_exts_add(), an unreachable return 0;
statement was left at the end of the function.
Remove it.
Fixes: bb4bbbec664f ("counter: Consolidate Counter extension sysfs attribute creation")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Link: https://lore.kernel.org/r/20260204180032.514328-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
quad8_irq_handler() should return irqreturn_t enum values, but it
directly returns negative errno codes from regmap operations on error.
Return IRQ_NONE if the interrupt status cannot be read. If clearing the
interrupt fails, return IRQ_HANDLED to prevent the kernel from disabling
the IRQ line due to a spurious interrupt storm. Also, log these regmap
failures with dev_WARN_ONCE.
Fixes: 98ffe0252911 ("counter: 104-quad-8: Migrate to the regmap API")
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251215020114.1913-1-vulab@iscas.ac.cn
Cc: stable@vger.kernel.org
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as
CONFIG_PROVE_RAW_LOCK_NESTING warns:
=============================
[ BUG: Invalid wait context ]
6.18.0-rc1+git... #1
-----------------------------
some-user-space-process/1251 is trying to lock:
(&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter]
other info that might help us debug this:
context-{2:2}
no locks held by some-user-space-process/....
stack backtrace:
CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT
Call trace:
show_stack (C)
dump_stack_lvl
dump_stack
__lock_acquire
lock_acquire
_raw_spin_lock_irqsave
counter_push_event [counter]
interrupt_cnt_isr [interrupt_cnt]
__handle_irq_event_percpu
handle_irq_event
handle_simple_irq
handle_irq_desc
generic_handle_domain_irq
gpio_irq_handler
handle_irq_desc
generic_handle_domain_irq
gic_handle_irq
call_on_irq_stack
do_interrupt_handler
el0_interrupt
__el0_irq_handler_common
el0t_64_irq_handler
el0t_64_irq
... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an
alternative to switching to raw_spinlock_t, because the latter would limit
all potential nested locks to raw_spinlock_t only.
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20251117151314.xwLAZrWY@linutronix.de/
Fixes: a55ebd47f21f ("counter: add IRQ or GPIO based counter")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20251118083603.778626-1-alexander.sverdlin@siemens.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Mark the interrupt as IRQF_SHARED to permit multiple counter channels to
share the same TCB IRQ line.
Each Timer/Counter Block (TCB) instance shares a single IRQ line among its
three internal channels. When multiple counter channels (e.g., counter@0
and counter@1) within the same TCB are enabled, the second call to
devm_request_irq() fails because the IRQ line is already requested by the
first channel.
Cc: stable@vger.kernel.org
Fixes: e5d581396821 ("counter: microchip-tcb-capture: Add IRQ handling")
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Reviewed-by: Bence Csókás <bence98@sch.bme.hu>
Link: https://lore.kernel.org/r/20251006-microchip-tcb-v1-1-09c19181bb4a@microchip.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
There is no need to register a manual `devm` action for
`pm_runtime_disable()` when `devm_pm_runtime_enable()` exists. It does
the same thing (but also calls `pm_runtime_dont_use_autosuspend()`,
which should be fine here).
Moreover, when `devm_add_action_or_reset()` fails, it is due to a failed
memory allocation and will thus return `-ENOMEM`. `dev_err_probe()`
doesn't do anything when error is `-ENOMEM`. Therefore, the call to
`dev_err_probe()` is useless. Note that `devm_pm_runtime_enable()` has a
tail call to `devm_add_action_or_reset()` and thus returns that value.
Therefore, replace `dev_err_probe()` with the returning value.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/pnda54bjmij.a.out@axis.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
Second set of Counter updates for 6.16
Adds compatible for STM32MP25 SoC and enables respective encoder
capability for stm32-timer-cnt. Implements watch_validate callback for
microchip-tcb-capture.
* tag 'counter-updates-for-6.16b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: microchip-tcb-capture: Add watch validation support
counter: stm32-timer-cnt: add support for stm32mp25
|
|
The Timer Counter Block (TCB) exposes several kinds of events to the
Counter framework, but not every event is meaningful on every hardware
channel. Add a `watch_validate()` callback so userspace may register only
the combinations actually supported:
* Channel 0 (COUNTER_MCHP_EVCHN_CV, COUNTER_MCHP_EVCHN_RA)
- COUNTER_EVENT_CAPTURE
- COUNTER_EVENT_CHANGE_OF_STATE
- COUNTER_EVENT_OVERFLOW
* Channel 1 (COUNTER_MCHP_EVCHN_RB)
- COUNTER_EVENT_CAPTURE
* Channel 2 (COUNTER_MCHP_EVCHN_RC)
- COUNTER_EVENT_THRESHOLD
Any other request is rejected with `-EINVAL`.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Link: https://lore.kernel.org/r/20250520-counter-tcb-v3-1-4631e2aff7ed@microchip.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
Counter updates for 6.16
An update to allow for larger count values in interrupt-cnt.
* tag 'counter-updates-for-6.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: interrupt-cnt: Convert atomic_t -> atomic_long_t
|
|
Add support for STM32MP25 SoC. There are new counter modes that may be
implemented in later. Still, use newly introduced compatible to handle
this new HW variant and avoid being blocked with existing compatible
in SoC dtsi file. Modes supported currently still remains compatible.
New timer 20 has encoder capability, add it to the list.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-4-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Enable/disable seems to be racy on SMP, consider the following scenario:
CPU0 CPU1
interrupt_cnt_enable_write(true)
{
if (priv->enabled == enable)
return 0;
if (enable) {
priv->enabled = true;
interrupt_cnt_enable_write(false)
{
if (priv->enabled == enable)
return 0;
if (enable) {
priv->enabled = true;
enable_irq(priv->irq);
} else {
disable_irq(priv->irq)
priv->enabled = false;
}
enable_irq(priv->irq);
} else {
disable_irq(priv->irq);
priv->enabled = false;
}
The above would result in priv->enabled == false, but IRQ left enabled.
Protect both write (above race) and read (to propagate the value on SMP)
callbacks with a mutex.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Fixes: a55ebd47f21f ("counter: add IRQ or GPIO based counter")
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250331163642.2382651-1-alexander.sverdlin@siemens.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Convert the internal counter type to atomic_long_t, which:
- doesn't change much for existing in-tree users as they are 32-bit anyway
(stm32/i.MX6)
- doesn't introduce performace penalty on 32-bit platforms
- provides 64-bit resolution on 64-bit platforms with virtually no
preformance penalty
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20250331152222.2263776-1-alexander.sverdlin@siemens.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are two counter driver fixes that I realized I never sent to you
for 6.14-final.
They have been in my for weeks, as well as linux-next, my fault for
not sending them earlier. They are:
- bugfix for stm32-lptimer-cnt counter driver
- bugfix for microchip-tcb-capture counter driver
Again, these have been in linux-next for weeks with no reported
issues"
* tag 'char-misc-6.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: microchip-tcb-capture: Fix undefined counter channel state on probe
counter: stm32-lptimer-cnt: fix error handling when enabling
|
|
In Capture mode, the RC register serves as a compare register for the
Timer Counter Channel. When a the Counter Value reaches the RC value, a
RC Compare event occurs (COUNTER_EVENT_THRESHOLD). This patch exposes
the RC register to userspace as the 'compare' Count extension, thus
allowing users to configure the threshold condition for these events.
Acked-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20250306-introduce-compare-component-v1-2-93993b3dca9c@kernel.org
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
TCB hardware is capable of capturing the timer value to registers RA and
RB. Add these registers as capture extensions.
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20250306134441.582819-3-csokas.bence@prolan.hu
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Add interrupt servicing to allow userspace to wait for the following:
* Change-of-state caused by external trigger
* Capture of timer value into RA/RB
* Compare to RC register
* Overflow
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20250306134441.582819-2-csokas.bence@prolan.hu
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Hardware initialize of the timer counter channel does not occur on probe
thus leaving the Count in an undefined state until the first
function_write() callback is executed. Fix this by performing the proper
hardware initialization during probe.
Fixes: 106b104137fd ("counter: Add microchip TCB capture counter")
Reported-by: Csókás Bence <csokas.bence@prolan.hu>
Closes: https://lore.kernel.org/all/bfa70e78-3cc3-4295-820b-3925c26135cb@prolan.hu/
Link: https://lore.kernel.org/r/20250305-preset-capture-mode-microchip-tcb-capture-v1-1-632c95c6421e@kernel.org
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
In case the stm32_lptim_set_enable_state() fails to update CMP and ARR,
a timeout error is raised, by regmap_read_poll_timeout. It may happen,
when the lptimer runs on a slow clock, and the clock is gated only
few times during the polling.
Badly, when this happen, STM32_LPTIM_ENABLE in CR register has been set.
So the 'enable' state in sysfs wrongly lies on the counter being
correctly enabled, due to CR is read as one in stm32_lptim_is_enabled().
To fix both issues:
- enable the clock before writing CMP, ARR and polling ISR bits. It will
avoid the possible timeout error.
- clear the ENABLE bit in CR and disable the clock in the error path.
Fixes: d8958824cf07 ("iio: counter: Add support for STM32 LPTimer")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250224170657.3368236-1-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Add support for reading the direction and for emitting direction change
events to the ti-eqep counter driver.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20250110-counter-ti-eqep-add-direction-support-v2-4-c6b6f96d2db9@baylibre.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
Counter fixes for 6.12
Fix device_node handling in stm32-timer-cnt by calling required
of_node_put() after device node is no longer needed. Check and handle
clk_enable() failures in stm32-timer-cnt and ti-ecap-capture.
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
* tag 'counter-fixes-for-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: ti-ecap-capture: Add check for clk_enable()
counter: stm32-timer-cnt: Add check for clk_enable()
counter: stm32-timer-cnt: fix device_node handling in probe_encoder()
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
Counter updates for 6.13
Add MODULE_DEVICE_TABLE() for ftm-quaddec to autoload based on the alias
from of_device_id table. Replace deprecated pcim_iomap_regions() and
pcim_iomap_table() calls with pcim_iomap_region() in intel-eqp.
* tag 'counter-updates-for-6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: intel-qep: Replace deprecated PCI functions
counter: ftm-quaddec: Enable module autoloading
|
|
Add check for the return value of clk_enable() in order to catch the
potential exception.
Fixes: 4e2f42aa00b6 ("counter: ti-ecap-capture: capture driver support for ECAP")
Reviewed-by: Julien Panis <jpanis@baylibre.com>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://lore.kernel.org/r/20241104194059.47924-1-jiashengjiangcool@gmail.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Add check for the return value of clk_enable() in order to catch the
potential exception.
Fixes: c5b8425514da ("counter: stm32-timer-cnt: add power management support")
Fixes: ad29937e206f ("counter: Add STM32 Timer quadrature encoder")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://lore.kernel.org/r/20241104191825.40155-1-jiashengjiangcool@gmail.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
pcim_iomap_regions() and pcim_iomap_table() have been deprecated in
commit e354bb84a4c1 ("PCI: Deprecate pcim_iomap_table(),
pcim_iomap_regions_request_all()").
Replace these functions with pcim_iomap_region().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20241028091312.17045-2-pstanner@redhat.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
Device nodes accessed via of_get_compatible_child() require
of_node_put() to be called when the node is no longer required to avoid
leaving a reference to the node behind, leaking the resource.
In this case, the usage of 'tnode' is straightforward and there are no
error paths, allowing for a single of_node_put() when 'tnode' is no
longer required.
Cc: stable@vger.kernel.org
Fixes: 29646ee33cc3 ("counter: stm32-timer-cnt: add checks on quadrature encoder capability")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241027-stm32-timer-cnt-of_node_put-v1-1-ebd903cdf7ac@gmail.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
Add MODULE_DEVICE_TABLE(), so modules can be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240902122014.905237-1-liaochen4@huawei.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual mix of fixes, cleanups, two new drivers and
several dt binding updates. The fixes are for minor issues that are
already old (4.11-rc1 and 3.9-rc1) and were found by code review and
not during usage, so I didn't sent them for earlier inclusion.
The changes to include/linux/mfd/stm32-timers.h and
drivers/counter/stm32-timer-cnt.c are part of an immutable branch that
will also be included in the mfd and counter pulls. It changes some
register definitions and affects the pwm-stm32 driver.
Thanks go to Andy Shevchenko, AngeloGioacchino Del Regno, Conor
Dooley, David Lechner, Dhruva Gole, Drew Fustini, Frank Li, Jeff
Johnson, Junyi Zhao, Kelvin Zhang, Krzysztof Kozlowski, Lee Jones,
Linus Walleij, Linus Walleij, Michael Hennerich, Nicola Di Lieto,
Nicolas Ferre, Nuno Sa, Paul Cercueil, Raag Jadav, Rob Herring, Sean
Anderson, Sean Young, Shenwei Wang, Stefan Wahren, Trevor Gamblin,
Tzung-Bi Shih, Vincent Whitchurch and William Breathitt Gray for their
contributions to this pull request; they authored changes, spend time
reviewing changes and coordinated the above mentioned immutable
branch"
* tag 'pwm/for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (38 commits)
pwm: axi-pwmgen: add .max_register to regmap
dt-bindings: pwm: at91: Add sama7d65 compatible string
pwm: atmel-tcb: Make private data variable naming consistent
pwm: atmel-tcb: Simplify checking the companion output
pwm: Allow pwm state transitions from an invalid state
pwm: xilinx: Simplify using devm_ functions
pwm: Use guards for pwm_lookup_lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for export->lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for pwm_lock instead of explicity mutex_lock + mutex_unlock
pwm: Register debugfs operations after the pwm class
pwm: imx-tpm: Enable pinctrl setting for sleep state
pwm: lpss: drop redundant runtime PM handles
pwm: lpss: use devm_pm_runtime_enable() helper
pwm-stm32: Make use of parametrised register definitions
dt-bindings: pwm: imx: remove interrupt property from required
pwm: meson: Add support for Amlogic S4 PWM
pwm: Add GPIO PWM driver
dt-bindings: pwm: Add pwm-gpio
pwm: Drop pwm_apply_state()
bus: ts-nbus: Use pwm_apply_might_sleep()
...
|
