| Age | Commit message (Collapse) | Author |
|---|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
|
|
The generic RSA key parser (rsa_helper.c) bounds each CRT component (p,
q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt()
allocates half-size DMA buffers (key_sz / 2) and right-aligns each
component with:
memcpy(dst + half_key_sz - len, src, len)
When a CRT component is larger than half_key_sz the subtraction
underflows and memcpy writes past the DMA buffer, causing memory
corruption.
Add a len > half_key_sz check next to the existing !len check for each
of the five CRT components so the driver falls back to the non-CRT path
instead of writing out of bounds.
Fixes: 879f77e9071f ("crypto: qat - Add RSA CRT mode")
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Tested-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The first device on a PCI root bus determines whether the host bridge is
whitelisted for P2PDMA. All Intel Xeon chips since Ice Lake (ICX, 2021)
expose a device with ID 0x09a2 as first device. It is loosely associated
with the IOMMU. All these Xeon chips support P2PDMA, so since the addition
of the device with commit feaea1fe8b36 ("PCI/P2PDMA: Add Intel 3rd Gen
Intel Xeon Scalable Processors to whitelist"), P2PDMA has been allowed on
all new Xeons without the need to amend the whitelist:
Xeons with Performance Cores:
Sapphire Rapids (SPR, 2023)
Emerald Rapids (EMR, 2023)
Granite Rapids (GNR, 2024)
Diamond Rapids (DMR, 2026)
Xeons with Efficiency Cores:
Sierra Forest (SRF, 2024)
Clearwater Forest (CWF, 2026)
However these Xeons also expose accelerators as first device on a root bus
of its own:
QuickAssist Technology (QAT, crypto & compression accelerator)
Data Streaming Accelerator (DSA, dma engine)
In-Memory Analytics Accelerator (IAA, compression accelerator)
Whitelist them for P2PDMA as well. Move their Device ID macros from the
accelerator drivers to <linux/pci_ids.h> for reuse by P2PDMA code.
Unfortunately the Device IDs vary across Xeon generations as additional
features were added to the accelerators. This currently necessitates an
amendment for each new Xeon chip.
For future chips, this need shall be avoided by an ongoing effort to extend
ACPI HMAT with PCIe P2PDMA characteristics (latency, bandwidth, ordering
constraints). The PCI core will be able look up in this BIOS-provided ACPI
table whether P2PDMA is supported, instead of relying on a whitelist that
needs to be amended continuously.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # QAT
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/6aac4922b5fe7070b11874427a9285e42ddd05a4.1780585518.git.lukas@wunner.de
|
|
Use a single scnprintf() for each set bit and drop the offset in the
else branch to simplify adf_service_mask_to_string().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for Intel Key Protection Technology (KPT) on QAT GEN6
devices.
KPT protects private keys from exposure by keeping them wrapped
(encrypted) while in use, in-flight, and at rest. Keys remain in wrapped
form and are not exposed in plaintext in host memory. This feature
operates outside of the Linux crypto framework and kernel keyring.
Extend the firmware admin interface to enable and configure KPT. During
device initialisation, if KPT is enabled, the driver sends an admin
message to firmware to enable KPT mode and configure parameters such as
the maximum number of SWK (Symmetric Wrapping Key) slots and the SWK
time-to-live (TTL).
Expose KPT configuration via a new sysfs attribute group, "qat_kpt", and
add ABI documentation.
Co-developed-by: Nitesh Venkatesh <nitesh.venkatesh@intel.com>
Signed-off-by: Nitesh Venkatesh <nitesh.venkatesh@intel.com>
Signed-off-by: Junyuan Wang <junyuan.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace dev_err(&pdev->dev, ...), dev_info(&pdev->dev, ...) and
dev_dbg(&pdev->dev, ...) with pci_err(), pci_info() and pci_dbg()
where the log message relates to a PCI subsystem operation such as
device enable, BAR mapping, PCI region requests, PCI state
save/restore, and SR-IOV management.
Messages about driver-level logic (NUMA topology, device matching,
accelerator units, capabilities, configuration, DMA) are intentionally
left as dev_err() even when a struct pci_dev pointer is in scope,
since those concern the device or driver rather than the PCI bus.
No functional change.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The service_table list is protected by service_lock when entries are
added or removed (in adf_service_add() and adf_service_remove()), but
several functions iterate over the list without holding this lock.
A concurrent adf_service_register() or adf_service_unregister() call
could modify the list during traversal, leading to list corruption or
a use-after-free.
Fix this by holding service_lock across all list_for_each_entry()
iterations of service_table in adf_dev_init(), adf_dev_start(),
adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(),
adf_dev_restarted_notify(), and adf_error_notifier().
The lock ordering is safe: callers of the static helpers (adf_dev_up()
and adf_dev_down()) acquire state_lock before service_lock, and no
event_hld callback or service_lock holder ever acquires state_lock in
the reverse order.
Cc: stable@vger.kernel.org
Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Co-developed-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Signed-off-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In adf_dev_aer_schedule_reset(), ADF_STATUS_RESTARTING is set before
allocating reset_data. If the allocation fails, the function returns
-ENOMEM without queuing reset work, so nothing ever clears the bit.
This leaves the device permanently stuck in the restarting state,
causing all subsequent reset attempts to be silently skipped.
Fix this by using test_and_set_bit() to atomically claim the
RESTARTING state, preventing duplicate reset scheduling races under
concurrent fatal error reporting. If the subsequent allocation fails,
clear the bit to restore clean state so future reset attempts can
proceed.
Cc: stable@vger.kernel.org
Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Co-developed-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Signed-off-by: Maksim Lukoshkov <maksim.lukoshkov@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A reset requested through /sys/bus/pci/devices/.../reset invokes the
driver reset_prepare() and reset_done() callbacks. The QAT driver does
not implement those callbacks today, so the reset proceeds without
quiescing the device or bringing it back up afterward, which leaves
the device unusable.
Hook reset_prepare() and reset_done() into adf_err_handler so the
common shutdown and recovery flow also runs for reset. Skip device
quiesce if the device is already in a down state.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move the shutdown and recovery sequences out of adf_error_detected()
and adf_slot_reset() into reset_prepare() and reset_done() helpers.
This makes the AER recovery path easier to follow and prepares the
common reset flow for reuse by additional PCI reset callbacks without
duplicating the logic.
No functional change intended.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Skip the shutdown and restart flow when adf_slot_reset() is entered
for a device that is already down. In that case, leave
ADF_STATUS_RESTARTING clear and let adf_slot_reset() restore PCI
function state without calling adf_dev_up(), re-enabling SR-IOV, or
sending restarted notifications.
This is in preparation for adding reset_prepare() and reset_done()
callbacks in adf_aer.c.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
QAT driver currently toggles PCI bus mastering in multiple places
(probe paths, and reset callbacks). This makes BME state depend on
call ordering and on what PCI command bits were captured in saved PCI
config state.
Make BME control explicit and deterministic:
- remove pci_set_master() from device-specific probe paths
- add adf_set_bme() and call it from adf_dev_init() so BME is enabled
at one point before device bring-up
- drop redundant pci_set_master() and pci_clear_master from adf_aer.c
and rely on the unified init path for BME enablement
This is in preparation for adding reset_prepare() and reset_done()
hooks. In the PCI reset callback flow, the PCI core saves and
restores device configuration state around reset_prepare() and
reset_done(). This change is needed to ensure that we are able to
properly shutdown or reinitialize the device post sysfs triggered
resets.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Send fatal error notifications to subsystems and VFs as soon as
AER error detection starts, before entering the reset preparation
shutdown sequence.
This reduces notification latency and ensures peers are informed
immediately on fatal detection, rather than after restart-state setup
and arbitration teardown.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When a reset is triggered via sysfs, the PCI core invokes the
reset_prepare() callback while holding pci_dev_lock(), which includes
the PCI configuration space access semaphore. If reset_prepare() calls
adf_dev_down(), the call chain adf_dev_stop() -> adf_disable_sriov()
-> pci_disable_sriov() attempts to acquire the same semaphore,
resulting in a deadlock.
Avoid this by skipping pci_disable_sriov() when ADF_STATUS_RESTARTING
is set. During reset the PCI topology is preserved, so VF devices
remain valid and enumerated across the reset. VF notification and the
quiesce handshake via adf_pf2vf_notify_restarting() are still
performed unconditionally so that VFs stop submitting work before the
PF shuts down.
Correspondingly, skip pci_enable_sriov() in adf_enable_sriov() when
VFs are already present, since their PCI devices were preserved from
before the restart.
This is in preparation for adding reset_prepare() and reset_done()
callbacks in adf_aer.c.
Cc: stable@vger.kernel.org
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The VF2PF interrupt handler queues PF-side response work that stores a
raw pointer to per-VF state (struct adf_accel_vf_info). Currently,
adf_disable_sriov() destroys per-VF mutexes and frees vf_info without
stopping new VF2PF work or waiting for in-flight workers to complete. A
concurrently scheduled or already queued worker can then dereference
freed memory.
This manifests as a use-after-free when KASAN is enabled:
BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0
Write of size 8 at addr 0000000000000260 by task kworker/24:2/...
Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat]
Call Trace:
kasan_report+0x119/0x140
mutex_lock+0x76/0xe0
adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat]
adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat]
adf_iov_send_resp+0x8c/0xe0 [intel_qat]
process_one_work+0x6ac/0xfd0
worker_thread+0x4dd/0xd30
kthread+0x326/0x410
ret_from_fork+0x33b/0x670
Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker
processing, and interrupt re-enabling during teardown. Set this flag
atomically with the hardware interrupt mask inside
adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE
cluster MSI-X interrupt and flush the PF response workqueue before
tearing down per-VF locks and state so all in-flight work completes
before vf_info is destroyed.
Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and
unmask all VF2PF interrupts under the same lock when SR-IOV is
re-enabled. This ensures the software flag and hardware state transition
atomically on both the enable and disable paths.
Cc: stable@vger.kernel.org
Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In-tree drivers do not need MODULE_VERSION as the kernel release
identifies the version of their code. The static version "0.6.0", which
the QAT drivers currently report, can be misleading as it might suggest
the drivers are outdated.
Remove MODULE_VERSION() from all QAT driver modules and the related
ADF_DRV_VERSION, ADF_MAJOR_VERSION, ADF_MINOR_VERSION and
ADF_BUILD_VERSION macros from adf_common_drv.h.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the character device and IOCTL interface have been removed,
adf_ctl_drv.c only contains module_init/module_exit hooks. Rename it
to adf_module.c to better reflect its purpose and rename the init/exit
functions accordingly.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs
for device configuration, start, stop, status query and enumeration.
These IOCTLs are not part of any public uAPI header and have no known
in-tree or out-of-tree users. Device lifecycle is already managed via
sysfs.
The ioctl interface also increases the attack surface and is the
subject of a number of bug reports.
Remove the character device, the IOCTL definitions, and the related
data structures (adf_dev_status_info, adf_user_cfg_key_val,
adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused
adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal
module_init/module_exit hooks for workqueue, AER, and crypto/compression
algorithm registration.
Clean up leftover dead code that was only reachable from the removed
IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(),
adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(),
adf_get_vf_real_id() and the unused ADF_CFG macros.
Additionally, drop the entry associated to QAT IOCTLs in
ioctl-number.rst.
Cc: stable@vger.kernel.org
Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Reported-by: Zhi Wang <wangzhi@stu.xidian.edu.cn>
Reported-by: Bin Yu <byu@xidian.edu.cn>
Reported-by: MingYu Wang <w15303746062@163.com>
Closes: https://lore.kernel.org/all/61d6d499.ab89.19b9b7f3186.Coremail.wangzhi_xd@stu.xidian.edu.cn/
Link: https://lore.kernel.org/all/20260508034841.256794-1-w15303746062@163.com/
Link: https://lore.kernel.org/all/20260508023542.256299-1-w15303746062@163.com/
Link: https://lore.kernel.org/all/20260504025120.98242-1-w15303746062@163.com/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
chainup_buffers() builds a linked list of buffer descriptors for a
scatterlist. If dma_pool_alloc() fails while constructing the list, the
current code sets buf to NULL and later dereferences it unconditionally
at the end of the function:
buf->next = NULL;
buf->phys_next = 0;
This can lead to a null-pointer dereference on allocation failure.
If the failure happens after part of the descriptor chain has already
been allocated and DMA-mapped, the partially constructed chain also
needs to be released.
Fix this by terminating the partially constructed chain on allocation
failure and letting the callers unwind it via their existing cleanup
paths. Also fix ablk_perform() to preserve the hook pointers before
checking for failure, so partially built chains can be freed correctly.
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Acked-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The current implementation of the heartbeat error injection uses
adf_disable_arb_thd() to stop a specific accelerator engine thread
from processing requests. This does not reliably prevent the device
from generating responses.
Fix the error injection by disabling the device arbiter through
exit_arb() instead. This properly simulates a device failure by
stopping all arbitration, which results in missing responses for
sent requests.
Remove the now unused adf_disable_arb_thd() function and its
declaration.
Fixes: e2b67859ab6e ("crypto: qat - add heartbeat error simulator")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When adf_dev_up() partially completes and then fails, the IRQ
handlers registered during adf_isr_resource_alloc() are not detached
before the MSI-X vectors are released.
Since the device is enabled with pcim_enable_device(), calling
pci_alloc_irq_vectors() internally registers pcim_msi_release() as a
devres action. On probe failure, devres runs pcim_msi_release() which
calls pci_free_irq_vectors(), tearing down the MSI-X vectors while IRQ
handlers (for example 'qat0-bundle0') are still attached. This causes
remove_proc_entry() warnings:
[ 22.163964] remove_proc_entry: removing non-empty directory 'irq/143', leaking at least 'qat0-bundle0'
Moving the devm_add_action_or_reset() before adf_dev_up() does not solve
the problem since devres runs in LIFO order and pcim_msi_release(),
registered later inside adf_dev_up(), would still fire before
adf_device_down().
Fix by calling adf_dev_down() explicitly when adf_dev_up() fails, to
properly free IRQ handlers before devres releases the MSI-X vectors.
Fixes: 17fd7514ae68 ("crypto: qat - add qat_6xxx driver")
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for the ZSTD algorithm for QAT GEN4, GEN5 and GEN6 via the
acomp API.
For GEN4 and GEN5, compression is performed in hardware using LZ4s, a
QAT-specific variant of LZ4. The compressed output is post-processed to
generate ZSTD sequences, and the ZSTD library is then used to produce
the final ZSTD stream via zstd_compress_sequences_and_literals(). Only
inputs between 8 KB and 512 KB are offloaded to the device. The minimum
size restriction will be relaxed once polling support is added. The
maximum size is limited by the use of pre-allocated per-CPU scratch
buffers. On these generations, only compression is offloaded to hardware;
decompression always falls back to software.
For GEN6, both compression and decompression are offloaded to the
accelerator, which natively supports the ZSTD algorithm. There is no
limit on the input buffer size supported. However, since GEN6 is limited
to a history size of 64 KB, decompression of frames compressed with a
larger history falls back to software.
Since GEN2 devices do not support ZSTD or LZ4s, add a mechanism that
prevents selecting GEN2 compression instances for ZSTD or LZ4s when a
GEN2 plug-in card is present on a system with an embedded GEN4, GEN5 or
GEN6 device.
In addition, modify the algorithm registration logic to allow
registering the correct implementation, i.e. LZ4s based for GEN4 and
GEN5 or native ZSTD for GEN6.
Co-developed-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace __builtin_bswap32() with swab32 in icp_qat_hw_20_comp.h to fix
the following build errors on architectures without native byte-swap
support:
alpha-linux-ld: drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.o: in function `adf_gen4_build_decomp_block':
drivers/crypto/intel/qat/qat_common/icp_qat_hw_20_comp.h:141:(.text+0xeec): undefined reference to `__bswapsi2'
alpha-linux-ld: drivers/crypto/intel/qat/qat_common/icp_qat_hw_20_comp.h:141:(.text+0xef8): undefined reference to `__bswapsi2'
alpha-linux-ld: drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.o: in function `adf_gen4_build_comp_block':
drivers/crypto/intel/qat/qat_common/icp_qat_hw_20_comp.h:57:(.text+0xf64): undefined reference to `__bswapsi2'
alpha-linux-ld: drivers/crypto/intel/qat/qat_common/icp_qat_hw_20_comp.h:57:(.text+0xf7c): undefined reference to `__bswapsi2'
Fixes: 5b14b2b307e4 ("crypto: qat - enable deflate for QAT GEN4")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603290259.Ig9kDOmI-lkp@intel.com/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Enabling any template selects CRYPTO_MANAGER, which causes
CRYPTO_MANAGER2 to enable itself, which selects every algorithm type
option. However, pulling in all algorithm types is needed only when the
self-tests are enabled. So condition the selections accordingly.
To make this possible, also add the missing selections to various
symbols that were relying on transitive selections via CRYPTO_MANAGER.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace the sequence of crypto_get_default_rng(),
crypto_rng_get_bytes(), and crypto_put_default_rng() with the equivalent
helper function crypto_stdrng_get_bytes().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The cpu counter used to compute the IAA device index is reset to zero
at the start of each NUMA node iteration. This causes CPUs on every
node to map starting from IAA index 0 instead of continuing from the
previous node's last index. On multi-node systems, this results in all
nodes mapping their CPUs to the same initial set of IAA devices,
leaving higher-indexed devices unused.
Move the cpu counter initialization before the for_each_node_with_cpus()
loop so that the IAA index computation accumulates correctly across all
nodes.
Fixes: 714ca27e9bf4 ("crypto: iaa - Optimize rebalance_wq_table()")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace scnprintf() with sysfs_emit() in the three RAS error counter
sysfs show callbacks. sysfs_emit() is the recommended API for sysfs show
functions as per Documentation/filesystems/sysfs.rst; it enforces the
PAGE_SIZE limit implicitly, removing the need to pass it explicitly.
Signed-off-by: Atharv Dubey <atharvd440@gmail.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ADF_RAS_ERR_CTR_READ() expands to atomic_read(), which returns int.
The local variable 'counter' was declared as 'unsigned long', causing
a type mismatch on the assignment. The format specifier '%ld' was
consequently wrong in two ways: wrong length modifier and wrong
signedness.
Use int to match the return type of atomic_read() and update the
format specifier to '%d' accordingly.
Fixes: 532d7f6bc458 ("crypto: qat - add error counters")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
qat_comp_alg_init_tfm() acquires a compression instance via
qat_compression_get_instance_node() before calling qat_comp_build_ctx()
to initialize the compression context. If qat_comp_build_ctx() fails, the
function returns an error without releasing the compression instance,
causing a resource leak.
When qat_comp_build_ctx() fails, release the compression instance with
qat_compression_put_instance() and clear the context to avoid leaving a
stale reference to the released instance.
The issue was introduced when build_deflate_ctx() (which always returned
void) was replaced by qat_comp_build_ctx() (which can return an error)
without adding error handling for the failure path.
Fixes: cd0e7160f80f ("crypto: qat - refactor compression template logic")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace the usage of crypto_acomp_tfm() followed by crypto_tfm_ctx()
with a single call to the equivalent acomp_tfm_ctx().
This does not introduce any functional changes.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The get_ae_mask() function only disables individual engines based on
the fuse register, but engines are organized in clusters of 4. If the
lead engine of a cluster is fused off, the entire cluster must be
disabled.
Replace the single bitmask inversion with explicit test_bit() checks
on the lead engine of each group, disabling the full ADF_AE_GROUP
when the lead bit is set.
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: fcf60f4bcf54 ("crypto: qat - add support for 420xx devices")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The get_ae_mask() function only disables individual engines based on
the fuse register, but engines are organized in clusters of 4. If the
lead engine of a cluster is fused off, the entire cluster must be
disabled.
Replace the single bitmask inversion with explicit test_bit() checks
on the lead engine of each group, disabling the full ADF_AE_GROUP
when the lead bit is set.
Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Fixes: 8c8268166e834 ("crypto: qat - add qat_4xxx driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Anti-Rollback (ARB) is a QAT GEN6 hardware feature that prevents loading
firmware with a Security Version Number (SVN) lower than an authorized
minimum. This protects against downgrade attacks by ensuring that only
firmware at or above a committed SVN can run on the acceleration device.
During firmware loading, the driver checks the SVN validation status via
a hardware CSR. If the check reports a failure, firmware authentication
is aborted. If it reports a retry status, the driver reissues the
authentication command up to a maximum number of retries.
Extend the firmware admin interface with two new messages,
ICP_QAT_FW_SVN_READ and ICP_QAT_FW_SVN_COMMIT, to query and commit the
SVN, respectively. Integrate the SVN check into the firmware
authentication path in qat_uclo.c so the driver can react to
anti-rollback status during device bring-up.
Expose SVN information to userspace via a new sysfs attribute group,
qat_svn, under the PCI device directory. The group provides read-only
attributes for the active, enforced minimum, and permanent minimum SVN
values, as well as a write-only commit attribute that allows a system
administrator to commit the currently active SVN as the new authorized
minimum.
This is based on earlier work by Ciunas Bennett.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add wireless mode support for QAT GEN6 devices.
When the WCP_WAT fuse bit is clear, the device operates in wireless
cipher mode (wcy_mode). In this mode all accelerator engines load the
wireless firmware and service configuration via 'cfg_services' sysfs
attribute is restricted to 'sym' only.
The get_accel_cap() function is extended to report wireless-specific
capabilities (ZUC, ZUC-256, 5G, extended algorithm chaining) gated by
their respective slice-disable fuse bits. The set_ssm_wdtimer() function
is updated to configure WCP (wireless cipher) and WAT (wireless
authentication) watchdog timers. The adf_gen6_cfg_dev_init() function is
updated to use adf_6xxx_is_wcy() to enforce sym-only service selection
for WCY devices during initialization.
Co-developed-by: Aviraj Cj <aviraj.cj@intel.com>
Signed-off-by: Aviraj Cj <aviraj.cj@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
QAT GEN6 hardware requires a minimum 3 us delay during the acceleration
engine reset sequence to ensure the hardware fully settles.
Without this delay, the firmware load may fail intermittently.
Add a delay after placing the AE into reset and before clearing the reset,
matching the hardware requirements and ensuring stable firmware loading.
Earlier generations remain unaffected.
Fixes: 17fd7514ae68 ("crypto: qat - add qat_6xxx driver")
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The macros in qat_hal.c were using a mixture of tabs and spaces.
Update all macro indentation to use tabs consistently, matching the
predominant style.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Return sysfs_emit() directly and drop 'ret' in cap_rem_show().
In cap_rem_store(), use 'ret' when calling set_param_u() instead of
assigning it to 'val' first, and remove 'val'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
|
|
Replace sprintf() with sysfs_emit() in verify_compress_show() and
sync_mode_show(). sysfs_emit() is preferred to format sysfs output as it
provides better bounds checking. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The restarting message from PF to VF is sent twice during AER error
handling: once from adf_error_detected() and again from
adf_disable_sriov().
This causes userspace subservices to shutdown unexpectedly when they
receive a duplicate restarting message after already being restarted.
Avoid calling adf_pf2vf_notify_restarting() and
adf_pf2vf_wait_for_restarting_complete() from adf_error_detected() so
that the restarting msg is sent only once from PF to VF.
Fixes: 9567d3dc760931 ("crypto: qat - improve aer error reset handling")
Signed-off-by: Harshita Bhilwaria <harshita.bhilwaria@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Ravikumar PM <ravikumar.pm@intel.com>
Reviewed-by: Srikanth Thokala <srikanth.thokala@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
iaa_unregister_compression_device() always returns 0, making the debug
log message unreachable. Remove the log statement and convert
iaa_unregister_compression_device() to a void function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Return the result directly to simplify init_iaa_device().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The local variable 'i' is initialized with -EINVAL, but the for loop
immediately overwrites it and -EINVAL is never returned.
If no empty compression mode can be found, the function would return the
out-of-bounds index IAA_COMP_MODES_MAX, which would cause an invalid
array access in add_iaa_compression_mode().
Fix both issues by returning either a valid index or -EINVAL.
Cc: stable@vger.kernel.org
Fixes: b190447e0fa3 ("crypto: iaa - Add compression mode management along with fixed mode")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Building the QAT driver with -Wmaybe-uninitialized triggers warnings in
qat_common/adf_pfvf_pf_proto.c. Specifically, the variables blk_type,
blk_byte, and byte_max may be used uninitialized in handle_blkmsg_req():
make M=drivers/crypto/intel/qat W=1 C=2 "KCFLAGS=-Werror" \
KBUILD_CFLAGS_KERNEL=-Wmaybe-uninitialized \
CFLAGS_MODULE=-Wmaybe-uninitialized
...
warning: ‘byte_max’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_type’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_byte’ may be used uninitialized [-Wmaybe-uninitialized]
Although the caller of handle_blkmsg_req() always provides a req.type
that is handled by the switch, the compiler cannot guarantee this.
Add a default case to the switch statement to handle an invalid req.type.
Fixes: 673184a2a58f ("crypto: qat - introduce support for PFVF block messages")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Register the functions required to save and restore the state of a ring
bank on the qat_420xx device. Since this logic is shared across QAT
GEN4 devices, reuse the existing GEN4 implementation.
This functionality enables saving and restoring the state of a Virtual
Function (VF), which is required for supporting VM Live Migration.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
