| Age | Commit message (Collapse) | Author |
|---|
|
(headers)
<linux/mod_devicetable.h> is included in a many files:
$ git grep '<linux/mod_devicetable.h>' ef0c9f75a195 | wc -l
1598
; some of them are widely used headers. To stop mixing up different and
unrelated driver( type)s let the subsystem headers only use the subset
of the recently split <linux/mod_devicetable.h> that are relevant for
them.
The fallout (I hope) is addressed in the previous commits that handle
sources relying on e.g. <linux/i2c.h> pulling in the full legacy header
and thus providing pci_device_id.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://patch.msgid.link/199fe46b624ba07fb9bd3e0cd6ff13757932cb5f.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
- support for new firmware handling in intel-ish-hid (Vishnu Sankar)
|
|
During a warm reset flow, the cl->device pointer may be NULL if the
reset occurs while clients are still being enumerated. Accessing
cl->device->reference_count without a NULL check leads to a kernel panic.
This issue was identified during multi-unit warm reboot stress clycles.
Add a defensive NULL check for cl->device to ensure stability under
such intensive testing conditions.
KASAN: null-ptr-deref in range [0000000000000000-0000000000000007]
Workqueue: ish_fw_update_wq fw_reset_work_fn
Call Trace:
ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp]
ishtp_reset_handler+0x85/0x1a0 [intel_ishtp]
fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc]
Fixes: 3703f53b99e4a ("HID: intel_ish-hid: ISH Transport layer")
Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add support for firmware filenames that include the CRC32 checksum of the
DMI product_family field. Several OEMs ship ISH firmware variants shared
across a product family while product_name or product_sku may differ. This
intermediate matching granularity reduces duplication and improves firmware
selection for vendor-customized platforms.
The newly supported filename forms are checked before existing patterns:
ish_${gen}_${vendor}_${family}_${name}_${sku}.bin
ish_${gen}_${vendor}_${family}_${sku}.bin
ish_${gen}_${vendor}_${family}_${name}.bin
ish_${gen}_${vendor}_${family}.bin
The legacy product_name/product_sku rules remain unchanged and continue
to provide fallback matching.
ISH_FW_FILENAME_LEN_MAX is changed to 72 to accommodate the product_family.
Tested with X9 series and X1 series.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Richie Roy Jayme <rjayme.jp@gmail.com>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The ishtp_cl_bus_match() function previously only checked the first entry
in the driver's device ID table. Update it to iterate over the entire
table, allowing proper matching for drivers with multiple supported
protocol GUIDs.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Add the ishtp_get_connection_state() function for struct ishtp_cl, allowing
ishtp client drivers to retrieve the current connection state.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
During suspend/resume tests with S2IDLE, some ISH functional failures were
observed because of delay in executing ISH resume handler. Here
schedule_work() is used from resume handler to do actual work.
schedule_work() uses system_wq, which is a per CPU work queue. Although
the queuing is not bound to a CPU, but it prefers local CPU of the caller,
unless prohibited.
Users of this work queue are not supposed to queue long running work.
But in practice, there are scenarios where long running work items are
queued on other unbound workqueues, occupying the CPU. As a result, the
ISH resume handler may not get a chance to execute in a timely manner.
In one scenario, one of the ish_resume_handler() executions was delayed
nearly 1 second because another work item on an unbound workqueue occupied
the same CPU. This delay causes ISH functionality failures.
A similar issue was previously observed where the ISH HID driver timed out
while getting the HID descriptor during S4 resume in the recovery kernel,
likely caused by the same workqueue contention problem.
Create dedicated unbound workqueues for all ISH operations to allow work
items to execute on any available CPU, eliminating CPU-specific bottlenecks
and improving resume reliability under varying system loads. Also ISH has
three different components, a bus driver which implements ISH protocols, a
PCI interface layer and HID interface. Use one dedicated work queue for all
of them.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
During s2idle suspend/resume testing on some systems, occasional several
tens of seconds delays were observed in HID sensor resume handling. Trace
analysis revealed repeated "link not ready" timeout errors during
set/get_report operations, which were traced to the
hid_ishtp_cl_resume_handler() timing out while waiting for the ISHTP
resume acknowledgment. The previous timeout was set to 50ms, which proved
insufficient on affected machines.
Empirical measurements on failing systems showed that the time from ISH
resume initiation to receiving the ISHTP resume ack could be as long as
180ms. As a result, the 50ms timeout caused failures.
To address this, increase the wait timeout for ISHTP resume ack from 50ms
to 300ms, providing a safer margin for slower hardware. Additionally, add
error logging when a timeout occurs to aid future debugging and issue
triage. No functional changes are made beyond the timeout adjustment and
improved error reporting.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The ISH driver performs a clock sync with the firmware once at system
startup and then every 20 seconds. If a firmware reset occurs right
after a clock sync, the driver would wait 20 seconds before performing
another clock sync with the firmware. This is particularly problematic
with the introduction of the "load firmware from host" feature, where
the driver performs a clock sync with the bootloader and then has to
wait 20 seconds before syncing with the main firmware.
This patch clears prev_sync immediately upon receiving an IPC reset,
so that the main firmware and driver will perform a clock sync
immediately after completing the IPC handshake.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
ishtp_cl_get_tx_free_buffer_size() and ishtp_cl_get_tx_free_rings()
were added in 2018 by
commit 18c0b5467498 ("HID: intel_ish-hid: Enhance API to get ring buffer
sizes")
but have remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
ishtp_cl_tx_empty() was added in 2018 by
commit a1c40ce62fd2 ("HID: intel-ish-hid: ishtp: add helper functions for
client buffer operation") but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
ishtp_dev_state_str() was added in 2016 by
commit 3703f53b99e4 ("HID: intel_ish-hid: ISH Transport layer")
but has never been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
- assorted cleanups and small code fixes (Dmitry Torokhov, Yan Zhen,
Nathan Chancellor, Andy Shevchenko)
|
|
Introduce sysfs attributes to the intel-ish-ipc driver to expose the base
and project firmware versions for ISH devices that load firmware from the
host.
The build tool embeds these versions into the ISH global manifest within
the firmware binary during the firmware build process. The driver, upon
loading the firmware, extracts this version information from the manifest
and makes it accessible via sysfs. The base version corresponds to the
firmware version provided in Intel's Firmware Development Kit (FDK), while
the project version reflects the vendor-customized firmware derived from
the FDK.
These attributes provide userspace tools and applications with the
ability to easily query the firmware versions, which is essential for
firmware validation and troubleshooting.
Example usages:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/firmware/base_version
5.8.0.7716
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/firmware/project_version
5.8.0.12472
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Correctly spelled comments make it easier for the reader to understand
the code.
Fix typos:
'mninum' -> 'minimum',
'destoyed' -> 'destroyed',
'thridparty' -> 'thirdparty',
'lowcase' -> 'lowercase',
'idenitifiers' -> 'identifiers',
'exeuction' -> 'execution',
'fregments' -> 'fragments',
'devides' -> 'devices'.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
- Add support for vendor customized firmware loading (Zhang Lixu)
|
|
Small fixes for drivers/hid:
- Add support for 3 multitouch panels (He Lugang, tammy tseng and Vishnu
Sankar)
- Unused declarations cleanups (Yue Haibing)
- Fix comma vs semicolon (Chen Ni)
|
|
Enhance the firmware loader to support the loading of vendor-specific
customized firmware for the Intel Integrated Sensor Hub (ISH). The
loader now constructs firmware file names based on the DMI_SYS_VENDOR,
DMI_PRODUCT_NAME, and DMI_PRODUCT_SKU information in Desktop Management
Interface (DMI). The loader will attempt to load the firmware files
following a specific naming convention in sequence. If successful, it
will skip the remaining files.
For more details, please refer to Documentation/hid/intel-ish-hid.rst.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
ISH allows vendors to customize ISH firmware. To differentiate different
vendors and load the correct firmware, Intel defined a firmware file
name format. As part of the filename, there is a "generation" string. To
load correct format the driver must know the generation name to create
file name.
In the absence of any vendor specific firmware, default ISH firmware is
loaded.
Currently full ISH firmware file name is stored as part of driver data.
This file name already includes the generation name. For example, for
Lunar Lake, the name is ish_lnlm.bin, where "lnlm" is the generation.
So instead of storing both generation name and ISH default firmware file
name, just store generation name and create the default ISH firmware
file name string during initialization.
No functional changes are expected.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Commit 3703f53b99e4 ("HID: intel_ish-hid: ISH Transport layer")
declared ishtp_remove_all_clients()/ishtp_can_client_connect()
but never implemented them.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
Couple of minor fixes on intel-ish-hid by Jeff Johnson:
- add missing MODULE_DESCRIPTION
- add missing doctext entry
|
|
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The newly added file causes a ton of sparse warnings about the
incorrect use of __le32 and similar types:
drivers/hid/intel-ish-hid/ishtp/loader.h:41:23: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:42:27: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:43:24: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:44:24: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:45:22: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.c:172:33: warning: restricted __le32 degrades to integer
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: warning: incorrect type in assignment (different base types)
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: expected restricted __le32 [usertype] length
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: got unsigned long
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: warning: incorrect type in assignment (different base types)
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: expected restricted __le32 [usertype] fw_off
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: got unsigned int [usertype] offset
drivers/hid/intel-ish-hid/ishtp/loader.c:180:17: warning: cast from restricted __le32
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: warning: invalid assignment: +=
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: left side has type unsigned int
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: right side has type restricted __le32
Add the necessary conversions and use temporary variables where appropriate
to avoid converting back.
Fixes: 579a267e4617 ("HID: intel-ish-hid: Implement loading firmware from host feature")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhang Lixu <lixu.zhang@intel.com>
Tested-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/intel-ish-hid/intel-ishtp.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Fix the 'make W=1' kernel-doc warning:
drivers/hid/intel-ish-hid/ishtp/bus.c:853: warning: Function parameter or struct member 'dev' not described in 'ishtp_wait_resume'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311060843.dXENYlGc-lkp@intel.com/
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
kernel test robot reported build error due to a pointer type mismatch:
.../ishtp/loader.c:172:8: error: incompatible pointer types passing
'__le64 *' (aka 'unsigned long long *') to parameter of type
'dma_addr_t *' (aka 'unsigned int *')
The issue arises because the driver, which is primarily intended for
x86-64, is also built for i386 when COMPILE_TEST is enabled.
Resolve type mismatch by using a temporary dma_addr_t variable to hold
the DMA address. Populate this temporary variable in dma_alloc_coherent()
function, and then convert and store the address in the
fragment->fragment_tbl[i].ddr_adrs field in the correct format.
Similarly, convert the ddr_adrs field back to dma_addr_t when freeing
the DMA buffer with dma_free_coherent().
Fixes: 579a267e4617 ("HID: intel-ish-hid: Implement loading firmware from host feature")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405201313.SAStVPrT-lkp@intel.com/
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Starting from the Lunar Lake generation, the ISH firmware has been
divided into two components for better space optimization and increased
flexibility. These components include a bootloader that is integrated
into the BIOS, and a main firmware that is stored within the operating
system's file system.
Introduce support for loading ISH main firmware from host. This feature is
applicable for Lunar Lake and later generation.
Current intel-ishtp-loader, is designed for Chrome OS based systems which
uses core boot and has different firmware loading method. For non chrome
systems the ISH firmware loading uses different method.
Key differences include:
1. The new method utilizes ISHTP capability/fixed client to enumerate the
firmware loader function. It does not require a connection or flow control,
unlike the method used in Chrome OS, which is enumerated as an ISHTP
dynamic client driver, necessitating connect/disconnect operations and flow
control.
2. The new method employs a table to describe firmware fragments, which are
sent to ISH in a single operation. Conversely, the Chrome OS method sends
firmware fragments in multiple operations within a loop, sending only one
fragment at a time.
Additionally, address potential error scenarios to ensure graceful failure
handling.
- Firmware Not Found: Triggers if request_firmware() fails, leaving ISH in
a waiting state.
Recovery: Re-insmod the ISH drivers to retry.
- DMA Buffer Allocation Failure: Occurs during prepare_dma_bufs(), leading
to ISH waiting state. Allocated resources are released.
Recovery: Re-insmod the ISH drivers to retry.
- Incorrect Firmware Image: Causes ISH to refuse loading after three failed
attempts.
Recovery: A platform reset is required.
Please refer to the [Documentation](Documentation/hid/intel-ish-hid.rst)
for the details on flows.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Introduces a new structure, ishtp_driver_data, to hold driver-specific
data, including the firmware filename for different hardware variants of
the Intel Integrated Sensor Hub (ISH).
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
After legacy suspend/resume via ACPI S3, sensor read operation fails
with timeout. Also, it will cause delay in resume operation as there
will be retries on failure.
This is caused by commit f645a90e8ff7 ("HID: intel-ish-hid:
ishtp-hid-client: use helper functions for connection"), which used
helper functions to simplify connect, reset and disconnect process.
Also avoid freeing and allocating client buffers again during reconnect
process.
But there is a case, when ISH firmware resets after ACPI S3 suspend,
ishtp bus driver frees client buffers. Since there is no realloc again
during reconnect, there are no client buffers available to send connection
requests to the firmware. Without successful connection to the firmware,
subsequent sensor reads will timeout.
To address this issue, ishtp bus driver does not free client buffers on
warm reset after S3 resume. Simply add the buffers from the read list
to free list of buffers.
Fixes: f645a90e8ff7 ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218442
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
- power management improvement for EHL OOB wakeup in intel-ish (Kai-Heng Feng)
- generic intel-ish code cleanups (Even Xu)
|
|
Now that the driver core can properly handle constant struct bus_type,
move the ishtp_cl_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
For every ishtp client driver during initialization state, the flow is:
1 - Allocate an ISHTP client instance
2 - Reserve a host id and link the client instance
3 - Search a firmware client using UUID and get related
client information
4 - Bind firmware client id to the ISHTP client instance
5 - Set the state the ISHTP client instance to CONNECTING
6 - Send connect request to firmware
7 - Register event callback for messages from the firmware
During deinitizalization state, the flow is:
9 - Set the state the ISHTP client instance to ISHTP_CL_DISCONNECTING
10 - Issue disconnect request to firmware
11 - Unlike the client instance
12 - Flush message queue
13 - Free ISHTP client instance
Step 2-7 are identical to the steps of client driver initialization
and driver reset flow, but reallocation of the RX/TX ring buffers
can be avoided in reset flow.
Also for step 9-12, they are identical to the steps of client driver
failure handling after connect request, driver reset flow and
driver removing.
So, add two helper functions to simplify client driver code.
ishtp_cl_establish_connection()
ishtp_cl_destroy_connection()
No functional changes are expected.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- kernel panic fix for intel-ish-hid driver (Tanu Malhotra)
- buffer overflow fix in hid-sensor-custom driver (Todd Brandt)
- two device specific quirks (Alessandro Manca, Philippe Troin)
* tag 'for-linus-2023041201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: intel-ish-hid: Fix kernel panic during warm reset
HID: hid-sensor-custom: Fix buffer overrun in device name
HID: topre: Add support for 87 keys Realforce R2
HID: add HP 13t-aw100 & 14t-ea100 digitizer battery quirks
|
|
During warm reset device->fw_client is set to NULL. If a bus driver is
registered after this NULL setting and before new firmware clients are
enumerated by ISHTP, kernel panic will result in the function
ishtp_cl_bus_match(). This is because of reference to
device->fw_client->props.protocol_name.
ISH firmware after getting successfully loaded, sends a warm reset
notification to remove all clients from the bus and sets
device->fw_client to NULL. Until kernel v5.15, all enabled ISHTP kernel
module drivers were loaded right after any of the first ISHTP device was
registered, regardless of whether it was a matched or an unmatched
device. This resulted in all drivers getting registered much before the
warm reset notification from ISH.
Starting kernel v5.16, this issue got exposed after the change was
introduced to load only bus drivers for the respective matching devices.
In this scenario, cros_ec_ishtp device and cros_ec_ishtp driver are
registered after the warm reset device fw_client NULL setting.
cros_ec_ishtp driver_register() triggers the callback to
ishtp_cl_bus_match() to match ISHTP driver to the device and causes kernel
panic in guid_equal() when dereferencing fw_client NULL pointer to get
protocol_name.
Fixes: f155dfeaa4ee ("platform/x86: isthp_eclite: only load for matching devices")
Fixes: facfe0a4fdce ("platform/chrome: chros_ec_ishtp: only load for matching devices")
Fixes: 0d0cccc0fd83 ("HID: intel-ish-hid: hid-client: only load for matching devices")
Fixes: 44e2a58cb880 ("HID: intel-ish-hid: fw-loader: only load for matching devices")
Cc: <stable@vger.kernel.org> # 5.16+
Signed-off-by: Tanu Malhotra <tanu.malhotra@intel.com>
Tested-by: Shaunak Saha <shaunak.saha@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As the kcalloc may return NULL pointer,
it should be better to check the ishtp_dma_tx_map
before use in order to avoid NULL pointer dereference.
Fixes: 3703f53b99e4 ("HID: intel_ish-hid: ISH Transport layer")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The variable rb_count is being incremented but it
is never referenced, it is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
There is a timing issue captured during ishtp client sending stress tests.
It was observed during stress tests that ISH firmware is getting out of
ordered messages. This is a rare scenario as the current set of ISH client
drivers don't send much data to firmware. But this may not be the case
going forward.
When message size is bigger than IPC MTU, ishtp splits the message into
fragments and uses serialized async method to send message fragments.
The call stack:
ishtp_cl_send_msg_ipc->ipc_tx_callback(first fregment)->
ishtp_send_msg(with callback)->write_ipc_to_queue->
write_ipc_from_queue->callback->ipc_tx_callback(next fregment)......
When an ipc write complete interrupt is received, driver also calls
write_ipc_from_queue->ipc_tx_callback in ISR to start sending of next fragment.
Through ipc_tx_callback uses spin_lock to protect message splitting, as the
serialized sending method will call back to ipc_tx_callback again, so it doesn't
put sending under spin_lock, it causes driver cannot guarantee all fragments
be sent in order.
Considering this scenario:
ipc_tx_callback just finished a fragment splitting, and not call ishtp_send_msg
yet, there is a write complete interrupt happens, then ISR->write_ipc_from_queue
->ipc_tx_callback->ishtp_send_msg->write_ipc_to_queue......
Because ISR has higher exec priority than normal thread, this causes the new
fragment be sent out before previous fragment. This disordered message causes
invalid message to firmware.
The solution is, to send fragments synchronously:
Use ishtp_write_message writing fragments into tx queue directly one by one,
instead of ishtp_send_msg only writing one fragment with completion callback.
As no completion callback be used, so change ipc_tx_callback to ipc_tx_send.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
A late addititon to the intel-ish-hid framework caused a build failure
with clang, and introduced an ABI to the module loader that stops working
if any driver ever needs to bind to more than one UUID:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:1067:4: error: initializer element is not a compile-time constant
Change the ishtp_device_id to have correct documentation and a driver_data
field like all the other ones, and change the drivers to use the ID table
as the primary identification in a way that works with all compilers
and avoids duplciating the identifiers.
Fixes: f155dfeaa4ee ("platform/x86: isthp_eclite: only load for matching devices")
Fixes: facfe0a4fdce ("platform/chrome: chros_ec_ishtp: only load for matching devices")
Fixes: 0d0cccc0fd83 ("HID: intel-ish-hid: hid-client: only load for matching devices")
Fixes: 44e2a58cb880 ("HID: intel-ish-hid: fw-loader: only load for matching devices")
Fixes: cb1a2c6847f7 ("HID: intel-ish-hid: use constants for modaliases")
Fixes: fa443bc3c1e4 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[jkosina@suse.cz: fix ecl_ishtp_cl_driver.id initialization]
[jkosina@suse.cz: fix conflict with already fixed kerneldoc]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
We need the driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ISH IPC driver uses asynchronous workqueue to do resume now, but there is
a potential timing issue: when child devices resume before bus driver, it
will cause child devices resume failed and cannot be recovered until
reboot. The current implementation in this case do wait for IPC to resume
but fail to accommodate for a case when there is no ISH reboot and soft
resume is taking time. This issue is apparent on Tiger Lake platform with
5.11.13 kernel when doing suspend to idle then resume(s0ix) test. To
resolve this issue, we change ISHTP HID client to use asynchronous resume
callback too. In the asynchronous resume callback, it waits for the ISHTP
resume done event, and then notify ISHTP HID client link ready.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Different platforms have different DMA capability, on most of
platforms, DMA support cache snooping. But few platforms,
such as ElkhartLake (EHL), don't support cache snooping
which requires cache flush from driver.
So add a hardware level callback to let ishtp driver know if cache
flush is needed.
As most of platform support cache snooping, so driver will not
do cache flush by default, until platform implements this callback
and return true explicitly.
Acked-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp/bus.c: In function ‘ishtp_trace_callback’:
drivers/hid/intel-ish-hid/ishtp/bus.c:876:29: warning: return type might be a candidate for a format attribute [-Wsuggest-attribute=format]
876 | return cl_device->ishtp_dev->print_log;
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Daniel Drubin <daniel.drubin@intel.com>
Cc: linux-input@vger.kernel.org
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp/client.c:121: warning: Function parameter or member 'cl_device' not described in 'ishtp_cl_allocate'
drivers/hid/intel-ish-hid/ishtp/client.c:121: warning: Excess function parameter 'dev' description in 'ishtp_cl_allocate'
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
|
