| Age | Commit message (Collapse) | Author |
|---|
|
These did not seem worth sending as a dedicated rc PR during the last week
of the cycle.
* ko-rdma/for-rc:
RDMA/ipoib: Drain RCU callbacks during module teardown
RDMA/mlx5: Drain RCU callbacks during module teardown
RDMA/core: Wait for RCU callbacks before unloading ib_core
RDMA/irdma: Prevent overflows in memory contiguity checks
RDMA/siw: publish QP after initialization
RDMA/hns: Fix potential integer overflow in mhop hem cleanup
RDMA/core: Fix memory leak in __ib_create_cq() on invalid cqe
RDMA/mana_ib: initialize err for empty send WR lists
RDMA/erdma: initialize ret for empty receive WR lists
RDMA/irdma: Prevent user-triggered null deref on QP create
RDMA/irdma: Prevent rereg_mr for non-mem regions
RDMA/cma: Fix hardware address comparison length in netevent callback
RDMa/mlx5: Avoid frame overflow warning
IB/mad: Drop unmatched RMPP responses before reassembly
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
isert_put_login_tx() posts the full-feature receive buffers before
__transport_register_session() runs, so an initiator that does not wait
for the final Login Response can still have a SCSI command executed
against an se_session whose se_tpg is NULL - the same oops as the
previous patch, at target_submit+0xbe.
Post them from isert_get_rx_pdu(), which the previous patch already uses
to send that response, and post them before that send: the receive queue
is filled at the moment the initiator is told it may use it. Allocating
there keeps the existing property that a memory allocation failure cannot
happen once the final Login Response is on the wire.
The receive queue is already empty between the final Login Request and
isert_post_recvm(); this moves the second point later, from a median of
92 us to 172 us over 1200 logins. Only an initiator that sends before it
has been told to can reach that window, and on IB and RoCE its send is
retried there until the buffers appear - isert_rdma_accept() asks for
rnr_retry_count = 7. iWARP has no RNR flow control, so there the same
send terminates the connection instead.
Measured over rxe, 400 login cycles per run, with an initiator that does
not wait: an instrumented build counted no entries to isert_recv_done()
before the buffers are posted in 10 runs, where that initiator oopsed
8 of 10 unpatched runs and 5 of 10 with only the previous patch.
Not tested: iWARP, discovery sessions over iSER, and real HCAs.
Fixes: b8d26b3be8b3 ("iser-target: Add iSCSI Extensions for RDMA (iSER) target driver")
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Link: https://patch.msgid.link/20260731041212.1733364-2-yhlee@isslab.korea.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
isert_put_login_tx() puts the final Login Response on the wire before
__transport_register_session(), which iscsi_post_login_handler() reaches
only after iscsi_target_do_login() returns. An initiator that issues a
SCSI command as soon as it sees that response can have it executed against
an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses
on the NULL dereference.
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 0 UID: 0 PID: 178 Comm: kworker/0:1H Not tainted 7.2.0-rc5-V2CTL-gf5098b6bae76 #10 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: ib-comp-wq ib_cq_poll_work
RIP: 0010:target_submit+0xbe/0x390
Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 89 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d 7c 24 78 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5a 02 00 00 48 8d 7b 78 4d 8b 6c 24 78 48 b8 00
RSP: 0018:ffff8881058cfa78 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff88810c78c6f0 RCX: ffffffff964bb363
RDX: 000000000000000f RSI: 00000000fffffe00 RDI: 0000000000000078
RBP: 1ffff11020b19f52 R08: 0000000000000001 R09: ffffed1020b19f52
R10: 0000000000000003 R11: ffff88810596c000 R12: 0000000000000000
R13: ffff88810c61b000 R14: ffff88810c6a3400 R15: ffff88810c61b044
FS: 0000000000000000(0000) GS:ffff8881822b2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1f1b83c000 CR3: 000000006fe72001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
? __pfx__raw_spin_lock_bh+0x10/0x10
? __pfx_target_submit+0x10/0x10
? mutex_lock+0x81/0xe0
? __pfx_mutex_lock+0x10/0x10
? iscsit_execute_cmd+0x650/0x850
iscsit_sequence_cmd+0x186/0x3d0
iscsit_process_scsi_cmd+0x87/0x300
isert_recv_done+0x1002/0x2390
? __pfx_isert_recv_done+0x10/0x10
? rxe_poll_cq+0x253/0x3d0
? finish_task_switch.isra.0+0x1dc/0xa70
__ib_process_cq+0xe1/0x390
ib_cq_poll_work+0x46/0x150
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Delay the final Login Response instead. isert_get_rx_pdu() runs from
iscsi_target_rx_thread() after conn->rx_login_comp, completed by
iscsi_post_login_handler() after __transport_register_session(); iscsi-TCP
and cxgbit already take PDUs from that thread, isert alone does not. The
buffers are still posted first, so the initiator's first command does not
meet an empty receive queue and nothing depends on RNR flow control, and
the header and payload live in isert_conn, not in the struct iscsi_login
that iscsi_target_nego_release() frees first.
Over rxe, 400 login cycles per run, the oops appeared in 10 of 20
unpatched runs and in none of 20 runs with this patch. An
initiator that never waits is handled by the next patch.
Not tested: iWARP, discovery sessions over iSER, and real HCAs.
Fixes: b8d26b3be8b3 ("iser-target: Add iSCSI Extensions for RDMA (iSER) target driver")
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Link: https://patch.msgid.link/20260731041212.1733364-1-yhlee@isslab.korea.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes
nothing to srp_process_cred_req() and srp_process_aer_req(), which read
fixed-size fields from the receive buffer without checking that those
fields were received.
The buffer size is max_ti_iu_len, which comes from the login response
and is not validated. A target that advertises 8 and then sends an
8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the
end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent
back, so those bytes reach the target. SRP_AER_REQ behaves the same way
and also reads req->lun.
The leak is 8 bytes per response. max_ti_iu_len also decides which slab
cache the buffer comes from. With 8 the buffer is a kmalloc-8 object and
the read is entirely outside it:
BUG: KASAN: slab-out-of-bounds in srp_recv_done+0x172b/0x1aa0
Read of size 8 at addr ffff888104714da8 by task kworker/u8:3/50
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of
allocated 8-byte region [ffff888104714da0, ffff888104714da8)
Without KASAN the returned bytes are whatever is next in the slab. One
run returned ".strtab".
rsp->data[3] in srp_process_rsp() has the same problem: only
resp_data_len is checked before it is read.
Drop a request that is shorter than the structure being parsed, and
check byte_len before the tsk_mgmt read.
Fixes: bb12588a38e6 ("IB/srp: Implement SRP_CRED_REQ and SRP_AER_REQ")
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Link: https://patch.msgid.link/20260729093203.1503201-1-yhlee@isslab.korea.ac.kr
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
isert_login_recv_done() records how many bytes the HCA actually placed in
the login buffer, but nothing compares that against the length the login
PDU's BHS declares. isert_rx_login_req() copies min(login_req_len,
MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then
reads the declared length back out of that buffer - for the first PDU in
iscsi_target_locate_portal(),
payload_length = ntoh24(login_req->dlength);
tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL);
and for the ones after it in iscsi_decode_text_input(), reached from
iscsi_target_do_login().
login->req_buf is a fixed MAX_KEY_VALUE_PAIRS (8192) byte allocation, so
an initiator that declares more than it sends reads off the end of it,
before authentication and with the length under its control:
BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80
Read of size 8193 at addr ffff8881056a8000 by task iscsi_np/167
__asan_memcpy+0x23/0x60
kmemdup_nul+0x43/0x80
iscsi_target_locate_portal+0x48d/0x1180
iscsi_target_login_thread+0x19a9/0x3350
Allocated by task 167:
__kmalloc_cache_noprof+0x158/0x370
iscsi_target_login_thread+0x971/0x3350
which belongs to the cache kmalloc-8k of size 8192
allocated 8192-byte region
Falsifying the second login PDU instead reaches the other reader, on the
same buffer:
BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80
Read of size 8193 at addr ffff888104d10000 by task kworker/1:1/50
Workqueue: isert_login_wq iscsi_target_do_login_rx
__asan_memcpy+0x23/0x60
kmemdup_nul+0x43/0x80
iscsi_decode_text_input+0xc6/0x11c0
iscsi_target_do_login+0x261/0x1470
iscsi_target_do_login_rx+0x51d/0x7d0
iscsit over TCP is not exposed: iscsit_get_login_rx() validates the
declared length with iscsi_target_check_login_request() and then reads
exactly that many bytes off the socket, so the declared length governs
how much arrives rather than how much is copied out of an already-filled
buffer. isert does not call iscsi_target_check_login_request() at all.
Reject a login PDU whose declared DataSegmentLength exceeds what was
received, in both paths that reach isert_rx_login_req():
isert_get_login_rx() for the first login PDU and isert_login_recv_done()
for the ones after it. dlength <= login_req_len is allowed because the
received count can include up to three bytes of iSCSI padding.
Once the check is in place the copy out can no longer exceed the copy in:
the posted login SGE is ISER_RX_PAYLOAD_SIZE, so login_req_len cannot
exceed MAX_KEY_VALUE_PAIRS and the min() in isert_rx_login_req() is
login_req_len.
Like the existing short-PDU check added by 29e7b925ae6d, the reject in
isert_login_recv_done() returns without completing login_req_comp, so a
malformed subsequent PDU leaves the login to be torn down by the login
timer rather than failing immediately. The first-PDU path returns an
error and fails straight away.
Reproduced on 7.2.0-rc4 with soft-RoCE (rdma_rxe) under KASAN, using an
initiator that sends the real key=value payload while declaring 8193 in
the BHS, on the first login PDU and on the second in separate runs. The
reported read size tracks the declared value exactly; 16384 and 61440
behave the same. Unpatched 3 of 3 runs report on each of the two paths,
patched 0 of 3 on both, run alternately in a single session, and a normal
login still completes on the patched build.
Fixes: b8d26b3be8b3 ("iser-target: Add iSCSI Extensions for RDMA (iSER) target driver")
Suggested-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Link: https://patch.msgid.link/20260726163931.971063-3-yhlee@isslab.korea.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
isert_recv_done() hands each received PDU to the opcode handlers without
ever looking at wc->byte_len, the number of bytes the HCA actually placed
in the receive descriptor. The handlers then copy that many bytes - the
data-segment length the initiator declared in the BHS
(ntoh24(hdr->dlength), via the derived unsol_data_len / imm_data_len) -
out of the fixed-size descriptor:
isert_handle_iscsi_dataout():
sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc),
unsol_data_len);
isert_handle_scsi_cmd():
sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents,
isert_get_data(rx_desc), imm_data_len);
Because the declared length is never checked against wc->byte_len, an
initiator can declare a data segment larger than the bytes it actually
sent (and larger than the descriptor) and cause an out-of-bounds read of
the receive buffer.
Nothing upstream of isert closes this door:
- __iscsit_check_dataout_hdr() bounds the inbound payload against
conn_ops->MaxXmitDataSegmentLength (MXDSL) - a transmit parameter,
used here for the inbound check.
- iscsi_set_connection_parameters() sets
ops->MaxXmitDataSegmentLength = ops->TargetRecvDataSegmentLength;
and TARGETRECVDATASEGMENTLENGTH is absent from the min()-clamp list in
iscsi_check_acceptor_state(), so the value the initiator declares is
adopted verbatim (type range 512..16777215). The initiator effectively
raises its own ceiling.
- isert never clamps the negotiated value to its own fixed receive
descriptor (ISER_RX_SIZE, 9216 bytes), so the target core's bound and
the descriptor size are unrelated.
The imm_data_len == data_len path is more than an over-read: it aliases
the receive descriptor via sg_set_buf() and passes it to the backend as
the data source for the SCSI WRITE, so an over-declared length causes heap
contents past the descriptor to be written through the backend to the
backing store. The backend is the victim of the oversized scatterlist
isert hands it, not the cause; no read-back of the written bytes was
demonstrated.
Trigger: after login completes (full feature phase), an initiator that has
declared a large TargetRecvDataSegmentLength and a FirstBurstLength that
permits unsolicited/immediate data sends a PDU whose declared data-segment
length exceeds what was received. With KASAN:
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0
Read of size 4096 at addr ffff888109720800 by task kworker/1:0H/25
Workqueue: ib-comp-wq ib_cq_poll_work
Call Trace:
sg_copy_buffer+0x150/0x1c0
isert_recv_done+0xba6/0x2390
__ib_process_cq+0xe1/0x390
ib_cq_poll_work+0x46/0x150
isert_recv_done+0xba6 resolves to isert_handle_iscsi_dataout()
(ib_isert.c:1160), inlined through isert_rx_opcode().
Validate wc->byte_len against the framing in isert_recv_done() before the
PDU reaches any handler, and reinstate the connection if it is short.
Because the test compares without subtracting the header length, it also
rejects PDUs shorter than the iSER and iSCSI headers, which would otherwise
be parsed out of stale descriptor contents. The login handler rejects PDUs
shorter than ISER_HEADERS_LEN (commit 29e7b925ae6d ("IB/isert: Reject login
PDUs shorter than ISER_HEADERS_LEN")) but does not bound the declared
length either; that is fixed in the next patch. The data handlers had no
length check at all.
isert reads the data segment from a fixed offset: isert_get_data()
returns the iSER header plus ISER_HEADERS_LEN and makes no adjustment for
an AHS. The bytes the handlers touch are therefore exactly
[ISER_HEADERS_LEN, ISER_HEADERS_LEN + dlength), and comparing that sum
against wc->byte_len bounds precisely the region that is read. An AHS
term would only make the test stricter without bounding anything further,
and cannot cause a false reject: a PDU carrying an AHS is longer, not
shorter.
This is a memory-safety fix that verifies the bytes that were actually
received; it does not touch RFC 7145 length negotiation and is not the
MaxXmitDataSegmentLength negotiation redesign raised in the 2017 "[Query]
iSER-Target: QP errors observed on increasing MaxXmitDataSegmentLength"
discussion. That redesign is explicitly out of scope here.
The patched kernel rejects the malformed DataOut PDU and both
immediate-data variants with "PDU declares ... bytes were received" and
continues to pass normal traffic with no regression.
Reproduced with soft-RoCE (rdma_rxe) and a raw rdma_cm/ibv initiator; no
kernel-side test hooks were needed.
Fixes: b8d26b3be8b3 ("iser-target: Add iSCSI Extensions for RDMA (iSER) target driver")
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Link: https://patch.msgid.link/20260726163931.971063-2-yhlee@isslab.korea.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Tag srp_class by the RDMA device's net namespace so SRP hosts derived from
same-named RDMA devices can coexist across namespaces.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-8-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
srpt_handle_cmd() maps the initiator-supplied srp_cmd->task_attr into
cmd->sam_task_attr, but then hands a hardcoded TCM_SIMPLE_TAG to
target_init_cmd().
Pass the already mapped cmd->sam_task_attr instead, so target core sees the
attribute the initiator requested.
Fixes: 9474b043132f ("ib_srpt: Convert I/O path to target_submit_cmd + drop legacy ioctx->kref")
Link: https://patch.msgid.link/20260721-b4-scsi-ordering-violation-due-to-hardc-v1-1-07205aab71bb@nvidia.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
When srpt_alloc_rw_ctxs() fails partway through a multi-buffer indirect
descriptor, the unwind path destroys RDMA contexts but leaves stale
n_rw_ctx and n_rdma values (and a dangling rw_ctxs pointer). Later
sq_wr_avail accounting in srpt_queue_response() or srpt_write_pending()
can then subtract the wrong number of send queue credits.
Reset the counters and clear rw_ctxs after freeing the heap
allocation before returning an error.
Fixes: b99f8e4d7bcd ("IB/srpt: convert to the generic RDMA READ/WRITE API")
Signed-off-by: TanZheng <tanzheng@kylinos.cn>
Link: https://patch.msgid.link/20260715101550.45345-1-kensanya@163.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The capability counter fields in struct ib_device_attr are declared
as signed int, but these values are inherently non-negative. Drivers
maintain their cached caps as u32 and assign them directly into these
int fields; if a cap exceeds INT_MAX the implicit narrowing yields a
negative value visible to the IB core.
Change the signed int capability fields to u32 to match the
underlying nature of the data. Also update consumers across the IB
core, ULPs, NVMe-oF target, RDS, and NFS/RDMA so the new u32 values
are not forced back through signed int or u8 via min()/min_t() or
narrowing local variables.
The nvmet-rdma consumer of max_srq clamps it against
ib_device.num_comp_vectors, which stays a signed int, so that site
uses min_t() instead of min() to handle the signed/unsigned mismatch.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260709055211.2498307-1-ernis@linux.microsoft.com
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Stefan Metzmacher <metze@samba.org> # smbdirect
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
IPoIB reclamation completions can be signaled from inside an RCU callback.
Teardown can wake before the callback returns and unload ib_ipoib while its
code is still executing.
Client registration failure can also remove already-added devices and queue
callbacks. Wait after client and workqueue teardown.
Fixes: b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Closes: https://lore.kernel.org/linux-rdma/20260708092316.Qb39F_B0@linutronix.de/
Link: https://patch.msgid.link/20260709-unload-rcu-v1-3-fccd27211e5a@nvidia.com
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Pull rdma updates from Jason Gunthorpe:
"Many AI driven bug fixes, and several big driver API cleanups
- Driver bug fixes and minor cleanups in mlx5, hns, rxe, efa, siw,
rtrs, mana, irdma, mlx4. Commonly error path flows, integer
arithmetic overflows on unsafe data, out of bounds access, and use
after free issues under races.
- Second half of the new udata API for drivers focusing on uAPI
response
- bnxt_re supports more options for QP creation that will allow a dv
path in rdma-core
- Untangle the module dependencies so drivers don't link to
ib_uverbs.ko as was originall intended
- Provide a new way to handle umems with a consistent simplified uAPI
and update several drivers to use it. This brings dmabuf support to
more places and more drivers
- Support for mlx5 rate limit and packet pacing for UD and UC
- A batch of fixes for the new shared FRMR pools infrastructure"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (148 commits)
RDMA/irdma: Replace waitqueue and flag with completion
RDMA/hns: Fix memory leak of bonding resources
RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg
docs: infiniband: correct name of option to enable the ib_uverbs module
RDMA/bnxt_re: Reject GET_TOGGLE_MEM when toggle page was not allocated
RDMA/bnxt_re: Fail DBR related page allocation UAPIs if the feature is disabled
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
RDMA/bnxt_re: Proper rollback if the ioremap fails
RDMA/bnxt_re: Add a max slot check for SQ
RDMA/bnxt_re: Avoid displaying the kernel pointer
RDMA/bnxt_re: Free CQ toggle page after firmware teardown
RDMA/bnxt_re: Free SRQ toggle page after firmware teardown
RDMA/bnxt_re: Initialize dpi variable to zero
ABI: sysfs-class-infiniband: minor cleanup
RDMA/mlx5: Release the HW‑provided UAR index rather than the SW one
RDMA/mlx5: Fix undefined shift of user RQ WQE size
RDMA/mlx5: Remove raw RSS QP restrack tracking
RDMA/mlx5: Remove DCT restrack tracking
RDMA/mlx5: Drop FRMR pool handle on UMR revoke failure
RDMA/core: Add ib_frmr_pool_drop for unrecoverable handles
...
|
|
When the server answers an RTRS READ, rdma_write_sg() builds the source
scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the
peer. Its length is taken directly from the wire descriptor:
plist->length = le32_to_cpu(id->rd_msg->desc[0].len);
rd_msg points into the chunk buffer that the remote peer filled via
RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() ->
process_read()), so desc[0].len is attacker-controlled and, before this
change, was only rejected when zero. The source address is the fixed
chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide
local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs
layer does not constrain the transfer length to max_chunk_size. msg_id
and off are bounded against queue_depth and max_chunk_size in
rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not
checked against the chunk size.
A peer that advertises desc[0].len larger than max_chunk_size can make
the posted RDMA write read past the chunk's mapped region. The resulting
behaviour depends on the IOMMU configuration: with no IOMMU or in
passthrough mode the read may extend into memory adjacent to the chunk
and be returned to the peer, which can disclose host memory; with a
translating IOMMU the out-of-range access is expected to fault and abort
the connection. In either case the transfer exceeds what the protocol
permits and is driven by a remote peer.
Reject a descriptor length above max_chunk_size, mirroring the existing
off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients
do not exceed it: the client sets desc[0].len to its MR length, which is
capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE).
Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality")
Link: https://patch.msgid.link/r/20260612-master-v1-1-70cde5c6fdc9@gmail.com
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhao Wan <whi4ed0g@gmail.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc8).
Conflicts:
drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
f67aead16e85 ("net: txgbe: rework service event handling")
57d39faed4c9 ("net: txgbe: improve functions of AML 40G devices")
net/rds/info.c
512db8267b73 ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
6e94eeb2a2a6 ("rds: convert to getsockopt_iter")
Adjacent changes:
include/net/sock.h
1ee90b77b727 ("net: guard timestamp cmsgs to real error queue skbs")
f0de88303d5e ("net: make is_skb_wmem() available to modules")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change the return type of ndo_set_rx_mode_async from void to int to
allow drivers to report failures back to the core stack. This is a
prerequisite for adding retry logic in the core when drivers fail to
program RX filters (e.g. bnxt VF when PF is unavailable).
All existing implementations return 0 for now, maintaining current
behavior.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260608154014.227538-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
usr_len is read from a network-supplied message field (le16_to_cpu)
and used to compute data_len = off - usr_len without validating that
usr_len <= off. A malicious RDMA client can send usr_len > off causing
an integer underflow, resulting in data_len wrapping to a huge size_t
value which is then passed to the rdma_ev callback as a memory length,
leading to out-of-bounds memory access.
Fix by reading and validating usr_len <= off before rtrs_srv_get_ops_ids()
in both process_read() and process_write(), ensuring the early return
path acquires no reference and has no resource leak.
Link: https://patch.msgid.link/r/20260608134802.5019-1-aurelien@hackers.camp
Reported-by: Aurelien DESBRIERES <aurelien@hackers.camp>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Aurelien DESBRIERES <aurelien@hackers.camp>
Assisted-by: Claude <claude-sonnet-4-6>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
srp_process_rsp() copies sense data from rsp->data + resp_data_len,
where resp_data_len is the full 32-bit value supplied by the SRP target
and is never checked against the number of bytes actually received
(wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, so
at most 96 bytes are copied, but the source offset is not bounded.
A malicious or compromised SRP target on the InfiniBand/RoCE fabric that
the initiator has logged into can return an SRP_RSP with
SRP_RSP_FLAG_SNSVALID set and a large resp_data_len. The receive buffer
is allocated at the target-chosen max_ti_iu_len, so the source of the
sense copy lands past the bytes actually received; with resp_data_len
near 0xFFFFFFFF it is gigabytes past the buffer and the read faults.
Copy the sense data only if it has not been truncated, that is, only if
the response header, the response data, and the sense region fit within
the bytes actually received; otherwise drop the sense and log. The
in-tree iSER and NVMe-RDMA receive paths already bound their parse by
wc->byte_len; this brings ib_srp into line with them.
Fixes: aef9ec39c47f ("IB: Add SCSI RDMA Protocol (SRP) initiator")
Link: https://patch.msgid.link/r/20260602220457.2542840-1-michael.bommarito@gmail.com
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done()
computes the login request payload length as wc->byte_len minus
ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int.
A remote iSER initiator can post a login Send work request carrying
fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows
and login_req_len becomes negative.
isert_rx_login_req() then reads that negative length back into a signed
int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the
min() is signed it keeps the negative value; the value is then passed as
the memcpy() length and sign-extended to a multi-gigabyte size_t. The
copy into the 8192-byte login->req_buf runs far out of bounds and
faults, crashing the target node. The login phase precedes iSCSI
authentication, so no credentials are required to reach this path.
Reject any login PDU shorter than ISER_HEADERS_LEN before the
subtraction, mirroring the existing early return on a failed work
completion, so login_req_len can never go negative. The upper bound was
already safe: a posted login buffer cannot deliver more than
ISER_RX_PAYLOAD_SIZE, so the difference stays at or below
MAX_KEY_VALUE_PAIRS and the existing min() clamps it; only the missing
lower bound needs to be added.
Fixes: b8d26b3be8b3 ("iser-target: Add iSCSI Extensions for RDMA (iSER) target driver")
Link: https://patch.msgid.link/r/20260602194642.2273217-1-michael.bommarito@gmail.com
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For dependencies in the following patches
Resolve conflicts, use the goto labels from the rc tag.
* tag 'v7.1-rc5': (1526 commits)
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Store the client path statistics in the RTRS client path allocation
instead of allocating them separately.
This ties the stats lifetime directly to the path and removes a separate
allocation failure path. Keep freeing the per-CPU stats data separately,
but do not free the embedded stats object from error paths or the stats
kobject release handler.
Link: https://patch.msgid.link/r/20260511041812.378030-1-rosenp@gmail.com
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
- syzbot triggred crash in rxe due to concurrent plug/unplug
- Possible non-zero'd memory exposed to userspace in bnxt_re
- Malicous 'magic packet' with SIW causes a buffer overflow
- Tighten the new uAPI validation code to not crash in debugging prints
and have the right module dependencies in drivers
- mana was missing the max_msg_sz report to userspace
- UAF in rtrs on an error path
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rtrs: Fix use-after-free in path file creation cleanup
RDMA/mana_ib: Report max_msg_sz in mana_ib_query_port
RDMA/core: Do not read wild stack memory in uverbs_get_handler_fn()
RDMA/core: Move the _ib_copy_validate_udata* functions to ib_core_uverbs
RDMA/siw: Reject MPA FPDU length underflow before signed receive math
RDMA/bnxt_re: zero shared page before exposing to userspace
selftests/rdma: explicitly skip tests when required modules are missing
RDMA/nldev: Add mutual exclusion in nldev_dellink()
|
|
In the error path of rtrs_srv_create_path_files(), the sysfs root folders
may already have been created and srv_path->kobj may already have been
initialized. If a later step fails, the cleanup currently calls
kobject_put(&srv_path->kobj) before
rtrs_srv_destroy_once_sysfs_root_folders(srv_path).
kobject_put() may drop the last reference to srv_path->kobj and invoke the
release callback, rtrs_srv_release(), which frees srv_path. The following
call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then
dereferences srv_path internally to access srv_path->srv, resulting in a
use-after-free.
This failure path is reached before rtrs_srv_create_path_files() returns
success, so the successful-path lifetime handling is not involved.
Fix this by destroying the sysfs root folders before calling
kobject_put(&srv_path->kobj), so srv_path is still valid while the helper
accesses it.
This issue was found by a static analysis tool I am developing.
Fixes: ae4c81644e91 ("RDMA/rtrs-srv: Rename rtrs_srv_sess to rtrs_srv_path")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Link: https://patch.msgid.link/20260514113834.865530-1-lgs201920130244@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
imm_buf->len is a user-controlled uint32_t received from the network.
Adding it to imm_data_offset without overflow checking allows a
malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap
around to a small value, bypassing the bounds check, and subsequently
passing a ~4GB length to sg_init_one().
Use check_add_overflow() to detect wrapping before the comparison.
Fixes: 5dabcd0456d7 ("RDMA/srpt: Add support for immediate data")
Reported-by: Carlos Bilbao (Lambda) <carlos.bilbao@kernel.org>
Signed-off-by: Sara Venkatesh <sarajvenkatesh@gmail.com>
Link: https://patch.msgid.link/20260504080036.3482415-1-sarajvenkatesh@gmail.com
Reviewed-by: Carlos Bilbao (Lambda) <carlos.bilbao@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The commit in the fixes tag added a warning for devices
that are netdev ops locked that they should be converted
to .ndo_set_rx_mode_async. IPoIB for mlx5 is such a
driver which was missed during the conversion because the
flow is more complex:
- mlx5 part of IPoIB device was converted to ops-lock in commit [1].
- ipoib_intf_init() then overrides netdev_ops with
ipoib_netdev_ops_{pf,vf}, which still wired ndo_set_rx_mode to the
legacy sync path -- tripping the new warning on every probe.
So now we have the following splat:
netdevice: ib0 (uninitialized): ops-locked drivers should use ndo_set_rx_mode_async
WARNING: net/core/dev.c:11366 at register_netdevice+0x83c/0x21d0
...
register_netdev+0x1f/0x40
ipoib_add_one+0x35c/0x880 [ib_ipoib]
This patch implements .ndo_set_rx_mode_async but it simply schedules the
multicast restart task like before. This is done to maintain the
assumption that this task and others [2] must run on the same order
workqueue to avoid racing with themselves. The race between
ipoib_mcast_join_task() and ipoib_mcast_restart_task() would be the most
obvious example.
[1] 8f7b00307bf1, "net/mlx5e: Convert mlx5 netdevs to instance locking")
[2] ipoib_mcast_join_task, ipoib_mcast_restart_task,
ipoib_mcast_carrier_on_task, ipoib_reap_ah, ipoib_reap_neigh
Fixes: 3cbd22938877 ("net: warn ops-locked drivers still using ndo_set_rx_mode")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patch.msgid.link/20260513124519.3357165-1-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, fnic, target, mpi3mr).
The substantive core changes are adding a 'serial' sysfs attribute and
getting sd to support > PAGE_SIZE sectors"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (98 commits)
scsi: target: Don't validate ignored fields in PROUT PREEMPT
scsi: qla2xxx: Use nr_cpu_ids instead of NR_CPUS for qp_cpu_map allocation
scsi: ufs: core: Disable timestamp for Kioxia THGJFJT0E25BAIP
scsi: mpi3mr: Fix typo
scsi: sd: fix missing put_disk() when device_add(&disk_dev) fails
scsi: libsas: Delete unused to_dom_device() and to_dev_attr()
scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC
scsi: iscsi_tcp: Remove unneeded selections of CRYPTO and CRYPTO_MD5
scsi: lpfc: Update lpfc version to 15.0.0.0
scsi: lpfc: Add PCI ID support for LPe42100 series adapters
scsi: lpfc: Introduce 128G link speed selection and support
scsi: lpfc: Check ASIC_ID register to aid diagnostics during failed fw updates
scsi: lpfc: Update construction of SGL when XPSGL is enabled
scsi: lpfc: Remove deprecated PBDE feature
scsi: lpfc: Add REG_VFI mailbox cmd error handling
scsi: lpfc: Log MCQE contents for mbox commands with no context
scsi: lpfc: Select mailbox rq_create cmd version based on SLI4 if_type
scsi: lpfc: Break out of IRQ affinity assignment when mask reaches nr_cpu_ids
scsi: ufs: core: Make the header files self-contained
scsi: ufs: core: Remove an include directive from ufshcd-crypto.h
...
|
|
Pull rdma updates from Jason Gunthorpe:
"The usual collection of driver changes, more core infrastructure
updates that typical this cycle:
- Minor cleanups and kernel-doc fixes in bnxt_re, hns, rdmavt, efa,
ocrdma, erdma, rtrs, hfi1, ionic, and pvrdma
- New udata validation framework and driver updates
- Modernize CQ creation interface in mlx4 and mlx5, manage CQ umem in
core
- Promote UMEM to a core component, split out DMA block iterator
logic
- Introduce FRMR pools with aging, statistics, pinned handles, and
netlink control and use it in mlx5
- Add PCIe TLP emulation support in mlx5
- Extend umem to work with revocable pinned dmabuf's and use it in
irdma
- More net namespace improvements for rxe
- GEN4 hardware support in irdma
- First steps to MW and UC support in mana_ib
- Support for CQ umem and doorbells in bnxt_re
- Drop opa_vnic driver from hfi1
Fixes:
- IB/core zero dmac neighbor resolution race
- GID table memory free
- rxe pad/ICRC validation and r_key async errors
- mlx4 external umem for CQ
- umem DMA attributes on unmap
- mana_ib RX steering on RSS QP destroy"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (116 commits)
RDMA/core: Fix user CQ creation for drivers without create_cq
RDMA/ionic: bound node_desc sysfs read with %.64s
IB/core: Fix zero dmac race in neighbor resolution
RDMA/mana_ib: Support memory windows
RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
RDMA/core: Prefer NLA_NUL_STRING
RDMA/core: Fix memory free for GID table
RDMA/hns: Remove the duplicate calls to ib_copy_validate_udata_in()
RDMA: Remove redundant = {} for udata req structs
RDMA/irdma: Add missing comp_mask check in alloc_ucontext
RDMA/hns: Add missing comp_mask check in create_qp
RDMA/mlx5: Pull comp_mask validation into ib_copy_validate_udata_in_cm()
RDMA: Use ib_copy_validate_udata_in_cm() for zero comp_mask
RDMA/hns: Use ib_copy_validate_udata_in()
RDMA/mlx4: Use ib_copy_validate_udata_in() for QP
RDMA/mlx4: Use ib_copy_validate_udata_in()
RDMA/mlx5: Use ib_copy_validate_udata_in() for MW
RDMA/mlx5: Use ib_copy_validate_udata_in() for SRQ
RDMA/pvrdma: Use ib_copy_validate_udata_in() for srq
RDMA: Use ib_copy_validate_udata_in() for implicit full structs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
|
kernfs has historically used const void * to pass around namespace tags
used for directory-level namespace filtering. The only current user of
this is sysfs network namespace tagging where struct net pointers are
cast to void *.
Replace all const void * namespace parameters with const struct
ns_common * throughout the kernfs, sysfs, and kobject namespace layers.
This includes the kobj_ns_type_operations callbacks, kobject_namespace(),
and all sysfs/kernfs APIs that accept or return namespace tags.
Passing struct ns_common is needed because various codepaths require
access to the underlying namespace. A struct ns_common can always be
converted back to the concrete namespace type (e.g., struct net) via
container_of() or to_ns_common() in the reverse direction.
This is a preparatory change for switching to ns_id-based directory
iteration to prevent a KASLR pointer leak through the current use of
raw namespace pointers as hash seeds and comparison keys.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Maintaining a modular IPv6 stack offers image size savings for specific
setups, this benefit is outweighed by the architectural burden it
imposes on the subsystems on implementation and maintenance. Therefore,
drop it.
Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig
dependencies across the tree that explicitly checked for IPV6=m. In
addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR()
and MODULE_LICENSE().
This is also replacing module_init() by device_initcall(). It is not
possible to use fs_initcall() as IPv4 does because that creates a race
condition on IPv6 addrconf.
Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y
except for m68k as according to the bloat-o-meter the image is
increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on
this architecture by default. This is aligned with m68k RAM requirements
and recommendations [1].
[1] http://www.linux-m68k.org/faq/ram.html
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # arm64
Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
OPA Vnic has been abandoned and left to rot. Time to excise.
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://patch.msgid.link/177308912950.1280237.15051663328388849915.stgit@awdrv-04.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260305154117.326472-1-marco.crivellari@suse.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This has us use the driver's completion preference by default. There is
no behavior changes with this patch and we queue completion to LIO's
completion workqueue by default.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260222232946.7637-3-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"Usual smallish cycle. The NFS biovec work to push it down into RDMA
instead of indirecting through a scatterlist is pretty nice to see,
been talked about for a long time now.
- Various code improvements in irdma, rtrs, qedr, ocrdma, irdma, rxe
- Small driver improvements and minor bug fixes to hns, mlx5, rxe,
mana, mlx5, irdma
- Robusness improvements in completion processing for EFA
- New query_port_speed() verb to move past limited IBA defined speed
steps
- Support for SG_GAPS in rts and many other small improvements
- Rare list corruption fix in iwcm
- Better support different page sizes in rxe
- Device memory support for mana
- Direct bio vec to kernel MR for use by NFS-RDMA
- QP rate limiting for bnxt_re
- Remote triggerable NULL pointer crash in siw
- DMA-buf exporter support for RDMA mmaps like doorbells"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/mlx5: Implement DMABUF export ops
RDMA/uverbs: Add DMABUF object type and operations
RDMA/uverbs: Support external FD uobjects
RDMA/siw: Fix potential NULL pointer dereference in header processing
RDMA/umad: Reject negative data_len in ib_umad_write
IB/core: Extend rate limit support for RC QPs
RDMA/mlx5: Support rate limit only for Raw Packet QP
RDMA/bnxt_re: Report QP rate limit in debugfs
RDMA/bnxt_re: Report packet pacing capabilities when querying device
RDMA/bnxt_re: Add support for QP rate limiting
MAINTAINERS: Drop RDMA files from Hyper-V section
RDMA/uverbs: Add __GFP_NOWARN to ib_uverbs_unmarshall_recv() kmalloc
svcrdma: use bvec-based RDMA read/write API
RDMA/core: add rdma_rw_max_sge() helper for SQ sizing
RDMA/core: add MR support for bvec-based RDMA operations
RDMA/core: use IOVA-based DMA mapping for bvec RDMA operations
RDMA/core: add bio_vec based RDMA read/write API
RDMA/irdma: Use kvzalloc for paged memory DMA address array
RDMA/rxe: Fix race condition in QP timer handlers
RDMA/mana_ib: Add device‑memory support
...
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes.
The biggest core change is the massive code motion in the sd driver to
remove forward declarations and the most significant change is to
enumify the queuecommand return"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
scsi: csiostor: Fix dereference of null pointer rn
scsi: buslogic: Reduce stack usage
scsi: ufs: host: mediatek: Require CONFIG_PM
scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
scsi: mpi3mr: Make driver probing asynchronous
scsi: ufs: core: Flush exception handling work when RPM level is zero
scsi: efct: Use IRQF_ONESHOT and default primary handler
scsi: ufs: core: Use a host-wide tagset in SDB mode
scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: mpi3mr: Driver version update to 8.17.0.3.50
scsi: mpi3mr: Fixed the W=1 compilation warning
scsi: mpi3mr: Record and report controller firmware faults
scsi: mpi3mr: Update MPI Headers to revision 39
scsi: mpi3mr: Use negotiated link rate from DevicePage0
scsi: mpi3mr: Avoid redundant diag-fault resets
scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
scsi: mpi3mr: Add module parameter to control threaded IRQ polling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning
option has been introduced. This warning is enabled by default and can
be used to catch .queuecommand() implementations that return another
value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch
that changes the return type of the .queuecommand() implementations from
'int' into 'enum scsi_qc_status'. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With all drivers converted to use ndo_hwstamp callbacks the legacy way
can be removed, marking ioctl interface as deprecated.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260116062121.1230184-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rtrs_srv_change_state() returns bool (true on success) therefore
there is no reason to print error when it fails as it always will
be 0.
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-11-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When the connection establishment request is rejected from the server
side, then the actual error number sent back should be used.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-10-haris.iqbal@ionos.com
Reviewed-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add HCA name and port of this HCA.
This would help with analysing and debugging the logs.
The logs would looks something like this,
rtrs_server L2516: Handling event: port error (10).
HCA name: mlx4_0, port num: 2
rtrs_client L3326: Handling event: port error (10).
HCA name: mlx4_0, port num: 1
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-9-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Excessive error logging is making it difficult to identify the root
cause of issues. Implement rate limiting to improve log clarity.
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-8-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
During several network incidents, a number of RTRS paths for a session
went through disconnect and reconnect phase. However, some of those did
not auto-reconnect successfully. Instead they failed with the following
logs,
On client,
kernel: rtrs_client L1991: <sess-name>: Connect rejected: status 28
(consumer defined), rtrs errno -104
kernel: rtrs_client L2698: <sess-name>: init_conns() failed: err=-104
path=gid:<gid1>@gid:<gid2> [mlx4_0:1]
On server, (log a)
kernel: ibtrs_server L1868: <>: Connection already exists: 0
When the misbehaving path was removed, and add_path was called to re-add
the path, the log on client side changed to, (log b)
kernel: rtrs_client L1991: <sess-name>: Connect rejected: status 28
(consumer defined), rtrs errno -17
There was no log on the server side for this, which is expected since
there is no logging in that path,
if (unlikely(__is_path_w_addr_exists(srv, &cm_id->route.addr))) {
err = -EEXIST;
goto err;
Because of the following check on server side,
if (unlikely(sess->state != IBTRS_SRV_CONNECTING)) {
ibtrs_err(s, "Session in wrong state: %s\n",
.. we know that the path in (log a) was in CONNECTING state.
The above state of the path persists for as long as we leave the session
be. This means that the path is in some zombie state, probably waiting
for the info_req packet to arrive, which never does.
The changes in this commits does 2 things.
1) Add logs at places where we see the errors happening. The logs would
shed more light at the state and lifetime of such zombie paths.
2) Close such zombie sessions, only if they are in CONNECTING state, and
after an inactivity period of 30 seconds.
i) The state check prevents closure of paths which are CONNECTED.
Also, from the above logs and code, we already know that the path could
only be on CONNECTING state, so we play safe and narrow our impact surface
area by closing only CONNECTING paths.
ii) The inactivity period is to allow requests for other cid to finish
processing, or for any stray packets to arrive/fail.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-7-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Remove unused members from rtrs_clt_io_req.
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-6-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The member variable status in the struct rdma_cm_event is used for both
linux errors and the errors definded in rdma stack.
Signed-off-by: Kim Zhu <zhu.yanjun@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-5-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
