| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"GPIO core:
- extend the gpio-regmap abstraction layer with more features
allowing users to override configuration setting, translate
register values and masks and enable/disable interrupts
- extend GPIO kunit tests with suites verifying probe ordering by
software node devlink support and software node hogs
- shrink GPIO kunit initialization code
- coding style updates (remove commas from sentinels where
applicable)
- with all users now converted treewide to using real firmware node
links for software node GPIO lookup: remove the deprecated
label-matching mechanism from from GPIO core
- drop redundant return value check of nonseekable_open() in
gpiolib-cdev
- use IRQ trigger helpers where applicable
Driver updates:
- refactor error paths and logging in gpio-nomadik
- use more modern interfaces for getting resources in gpio-rockchip,
gpio-bt8xx and gpio-pca9570
- add missing MODULE_DEVICE_TABLE() to gpio-sifive and gpio-vf610
- drop unused FILONOFF macro from gpio-rcar
- extend build coverage of ioport GPIO drivers with COMPILE_TEST=y
- only enable the gpio-rtd driver by default with ARCH_REALTEK=y to
avoid bloating the build
- refactor coding style in several drivers
- use correct endianess translation in gpio-pcf85x
- add wake-up interrupt support to gpio-mvebu
- apply initial value in direction output setter in gpio-by-pinctrl
Misc:
- replace linux/gpio.h inclusions treewide with linux/gpio/legacy.h
which now exports all the deprecated APIs
- select GPIOLIB_LEGACY in Kconfig where required treewide
- use software nodes for gpio-keys in MFD drivers
Devicetree bindings:
- describe the realtek rtd1625 GPIO controller
- document new models for gpio-pca95xx and gpio-cadence
- document new property in gpio-rockchip"
* tag 'gpio-updates-for-v7.3-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (61 commits)
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
dt-bindings: gpio: rockchip,gpio-bank: Add rockchip,grf property
gpio: Use IRQ trigger mask helpers
gpio: allow COMPILE_TEST for IOPORT drivers
gpio: realtek: Add driver for Realtek DHC RTD1625 SoC
gpio: regmap: Add IRQ enable/disable helpers
gpio: regmap: Add set_config callback
gpio: regmap: Add value_xlate callback
gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback
gpio: regmap: Order kernel-doc descriptions with the actual appearance
gpio: regmap: Apply default resource callbacks for regmap IRQ chip
gpio: regmap: Provide default IRQ resource request and release callbacks
Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC"
gpib: gpio: replace linux/gpio.h inclusion
Input: matrix_keyboard - replace linux/gpio.h inclusion
phy: replace linux/gpio.h inclusions
pcmcia: replace linux/gpio.h inclusions
ASoC: replace linux/gpio.h inclusions
mfd: replace linux/gpio.h inclusions
sh: replace linux/gpio.h inclusions
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features, cleanup for 7.3
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
* tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits)
iio: dac: mcp47a1: add support for new device
dt-bindings: iio: dac: add support for mcp47a1
iio: Update email for Maxwell Doose
iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion
iio: light: cm32181: return zero after writing calibscale
iio: flow: add Sensirion SLF3S liquid flow sensor driver
iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
iio: types: add IIO_VOLUMEFLOW channel type
iio: ABI: Encourage differential voltage ABI usage
iio: adc: ltc2378: Add support for LTC2338-18
iio: adc: ltc2378: Enable triggered buffer data capture
iio: adc: ltc2378: Enable high-speed data capture
iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
dt-bindings: iio: adc: Add ltc2378
iio: magnetometer: ak8974: remove conditional return with no effect
iio: light: tsl2583: remove conditional return with no effect
iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper
iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper
iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next
Linux 7.2
|
|
Prepare input updates for 7.3 merge window.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Fixes for information leaks and OOB accesses across several drivers,
including evdev, focaltech, edt-ft5x06, iforce, and cs40l50-vibra
- Improvements to the synaptics-rmi4 driver to properly handle F54
worker errors and prevent buffer overflows
- Input validation fixes in the hynitron_cstxxx touchscreen driver to
prevent issues with invalid finger IDs and touch counts
- Fixes for use-after-free and initialization bugs in the byd mouse and
psxpad-spi drivers
- New quirks for the atkbd driver to make keyboard work on HONOR and
Xiaomi laptops
- Support for the ZENAIM LEVERLESS controller in the xpad driver.
* tag 'input-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: evdev - sanitize event type index when fetching event masks
Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue
Input: synaptics-rmi4 - block s_input when F54 queue is busy
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
Input: synaptics-rmi4 - zero report size on F54 work error
Input: synaptics-rmi4 - fix F55 transmitter electrode count typo
Input: hynitron_cstxxx - validate touch count and finger IDs
Input: evdev - fix information leak in evdev_pass_values()
fixp-arith: convert comments to kernel-doc format
Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet
Input: atkbd - skip deactivate for HONOR ZQC-P
Input: atkbd - skip deactivate for Xiaomi Book Pro 14's internal keyboard
Input: iforce - validate input packet lengths
Input: psxpad-spi - set driver data before use
Input: cs40l50-vibra - validate custom data from user space
Input: xpad - add support for ZENAIM LEVERLESS
Input: edt-ft5x06 - ignore contacts with an out-of-range slot id
Input: byd - synchronize timer deletion before freeing private data
|
|
Instead of hardcoding PA-RISC specific keycode tables into atkbd via
compile-time inclusion, have the gscps2 PS/2 port driver attach a
linux,keymap software node device property to the serio device when
a keyboard port is registered. This allows atkbd to dynamically fetch
and apply the custom keymap when probing the port using generic
firmware property helpers, removing architecture-specific hacks from
generic keyboard driver code.
Co-locate the keymap definitions with the serio port driver by moving
hpps2atkbd.h from drivers/input/keyboard/ to drivers/input/serio/.
To handle the five conflicting keys on RDI PrecisionBook laptops without
runtime model string checks or duplicate keymap tables in memory, add
CONFIG_SERIO_GSCPS2_RDI_KEYCODES to drivers/input/serio/Kconfig and
resolve the conflicting keycodes at compile time via preprocessor
macros.
Link: https://patch.msgid.link/am_9BvmZu9g4RlUM@google.com
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Both branches of the check return the same value, so the check has no
effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260729171001.260698-2-ekffu200098@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Simplify the driver by using the block-scope guard(pm_runtime_active)
instead of manually invoking pm_runtime_get_sync() and
pm_runtime_put().
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-3-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver requests the interrupt during probe, which by default enables
it. If the bootloader left the keypad interrupts enabled, or if a
spurious interrupt fires early before the driver is fully initialized
and clocks are enabled, the interrupt handler will attempt to read
registers and may cause a synchronous external abort.
Fix this by requesting the interrupt with IRQF_NO_AUTOEN, keeping it
disabled during probe. Enable the interrupt in samsung_keypad_start()
when the device is opened and ready, and disable it in
samsung_keypad_stop() when the device is closed. Remove the redundant
re-enabling of the interrupt at the end of samsung_keypad_stop().
Additionally, manually clear the pending interrupt status during system
resume when the device is closed to avoid immediate resume.
Fixes: 0fffed27f92d ("Input: samsung-keypad - Add samsung keypad driver")
Assisted-by: Antigravity:gemini-3.1-pro
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-2-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When checking if the device can wake the system, we should pull the
device_may_wakeup() check to the caller instead of repeating it inside
the toggle_wakeup() handler. Furthermore, when configuring the wakeup,
we should safely ensure we write to the registers in the correct order:
configure the interrupt receiver before enabling the peripheral's wake
functionality, and vice-versa.
Assisted-by: Antigravity:gemini-3.1-pro
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-1-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The internal keyboard on the HONOR ZQC-P (HONOR MagicBook Pro 14 2026)
does not work after boot.
Using the kernel command line 'i8042.dumbkbd=1' makes the keyboard
functional, but the CapsLock LED does not work. Adding the
'atkbd_deactivate_fixup' quirk fixes the keyboard and CapsLock LED
natively without requiring boot parameters.
DMI: HONOR ZQC-P/ZQC-P-PCB, BIOS 1.09 03/19/2026
Fixes: 9cf6e24c9fbf ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Signed-off-by: Donglin Lyu <donglin_lyu@outlook.com>
Tested-by: Ruslan Shevchenko <adefka@gmail.com>
Link: https://patch.msgid.link/20260801151115.52709-1-donglin_lyu@outlook.com
Cc: stable@vger.kernel.org
[dtor: keep all HONOR entries together]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The internal keyboard of the Xiaomi Book Pro 14 does not work unless
atkbd skips deactivating it at the end of atkbd_probe().
Using 'i8042.dumbkbd=1' also makes the keyboard work, but then the driver
never writes to the keyboard at all, so the Caps Lock LED is lost. The
atkbd_deactivate_fixup quirk fixes both without a boot parameter.
DMI: XIAOMI Xiaomi Book Pro 14/TM2424, BIOS XMAPT4B0P0909 05/06/2026
Signed-off-by: Zhefu Zhang <a723356@gmail.com>
Reviewed-by: Andrew Zhou <zhoulol888@gmail.com>
Link: https://patch.msgid.link/20260802031559.19701-1-a723356@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into gpio/for-next
gpio: legacy interface cleanups for 7.3
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
|
|
charlieplex_keypad_scan_line() currently ignores the return value of
gpiod_direction_output() when setting the active output line for scanning.
If setting the GPIO direction fails (e.g. on I2C/SPI GPIO expanders or
hardware errors), the function continues to sleep and read input values
from an improperly configured GPIO line.
Fix this by capturing the return value of gpiod_direction_output() and
returning the error code immediately if it fails.
Fixes: 2ca45e57ea02 ("Input: charlieplex_keypad - add GPIO charlieplex keypad")
Signed-off-by: Surendra Singh Chouhan <kr494167@gmail.com>
Link: https://patch.msgid.link/20260723022943.9337-1-kr494167@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
linux/gpio.h is going away, so remove that since the driver already
includes linux/gpio/consumer.h.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Most users of gpio-keys and gpio-keys-polled use modern gpiolib
interfaces, but there are still number of ancient sh, arm32 and x86
machines that have never been converted.
Add an #ifdef block for the parts of the driver that are only used on
those legacy machines.
Link: https://lore.kernel.org/all/b3c94552-c104-42e3-be15-7e8362e8039e@gmail.com/
Link: https://lore.kernel.org/all/afJXG4_rtaj3l2Dk@google.com/
Link: https://lore.kernel.org/all/ajQ-CtU131FAJ9ES@google.com/
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
suspend
The driver implements debounce protection using a timer-based mechanism:
when a key interrupt occurs, a timer is scheduled to verify the key state
after DEBOUNCE_TIME before reporting the event. This works well during
normal operation.
However, key press events can be lost during system resume on platforms
like i.MX8MQ-EVK because:
1. During the no_irq resume phase, PCIe driver restoration can take up to
200ms with IRQs disabled.
2. The power key interrupt remains pending during the no_irq phase.
3. If the key is released before IRQs are re-enabled, the timer eventually
runs but sees the key as released and skips reporting the event.
To prevent event loss during system suspend, set a pending_press flag in
the interrupt handler and report the press event from the timer callback
when the flag is set. This avoids out-of-order event delivery and keeps
the existing timer-based debounce mechanism for normal operation.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260715-b4-pwrkey-v5-4-07e7353c319e@oss.nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Use local struct device pointer to avoid reference the platform_device
pointer every time.
No functional change.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Link: https://patch.msgid.link/20260715-b4-pwrkey-v5-3-07e7353c319e@oss.nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Hardcoding -EINVAL discards the actual error code, which breaks probe
deferral (-EPROBE_DEFER) and loses critical diagnostic information
needed for proper kernel error handling.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Link: https://patch.msgid.link/20260715-b4-pwrkey-v5-2-07e7353c319e@oss.nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add dev_err_probe() at return path of probe() to support users to
identify issues easier.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Link: https://patch.msgid.link/20260715-b4-pwrkey-v5-1-07e7353c319e@oss.nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver currently sets only the overflow interrupt enable bit
(OVR_FLOW_IEN) in the configuration register, leaving the overflow
mode bit (OVR_FLOW_M) at its default value of 0.
According to the TCA8418 datasheet (SCPS215G, Section 8.6.4.1
"Overflow Errata - Description"), both OVR_FLOW_M (Bit_5) and
OVR_FLOW_IEN (Bit_3) must be set high for the overflow interrupt
to be generated. If only OVR_FLOW_IEN is set, FIFO overflow events
are silently lost without notifying the host.
Fix this by setting OVR_FLOW_M alongside OVR_FLOW_IEN in the
configuration register.
Signed-off-by: Zhian Liang <liangzhan5dev@gmail.com>
Link: https://patch.msgid.link/20260529013900.43854-1-liangzhan5dev@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Sync up with mainline to pull in stable fixes to avoid merge conflicts.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- fix MELFAS MMS114 touchscreen driver to reject invalid touch IDs and
avoid multi-touch slot corruption
- fix a crash in the Sega Dreamcast (Maple) mouse driver when opening
the device, caused by missing driver data
- fixes for Maple drivers (keyboard, mouse, joystick) to properly order
setting driver data and device registration to avoid races
* tag 'input-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: mms114 - fix multi-touch slot corruption
Input: maple_keyb - set driver data before registering input device
Input: maplecontrol - set driver data before registering input device
Input: maplemouse - set driver data before registering input device
Input: maplemouse - fix NULL pointer dereference in open()
|
|
linux/gpio.h is going away, so remove that since the driver already
includes linux/gpio/consumer.h.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260710211954.1373336-10-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Linux 7.2-rc2
Done to resolve conflicts with header reorg around mod_devicetable.h
and provide a base for other inflight series that touch the includes.
|
|
Use namespaced exports for IIO consumer API functions.
This will make it easier to manage the IIO export surface. Consumer drivers
will only be provided access to a specific set of functions, thereby
restricting usage of internal IIO functions by other parts of the kernel.
This change cannot be split into several parts without breaking
bisectability, thus all of the affected drivers are modified at once.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
CAP1114 is a 14-channel capacitive touch sensor with 11 LED outputs
and hardware reset support.
The CAP1114 uses two control registers for LED output management and
requires two button status registers for touch input state reporting.
By default, channels CS8~CS14 operate as a single grouped block.
Set the corresponding register enable bit to enable these channels as
independent touch inputs. Note these channels share the input threshold
of the eighth entry, causing num_sensor_thresholds to differ from
num_channels.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-11-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Check of_property_present() before parsing microchip,calib-sensitivity
and microchip,signal-guard, so that models which do not support these
properties (e.g. CAP1114) skip the parsing entirely.
This prevents a potential buffer overflow in calib_sensitivities[8] and
signal_guard_inputs_mask when a model with more than 8 channels
(CAP1114 has 14) would otherwise call of_property_read_u32_array()
with num_channels as the element count.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-9-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Extend cap11xx_hw_model structure to support CAP1114 with
different register offsets and hardware characteristics:
- led_output_control_reg_base: different address on CAP1114
- sensor_input_reg_base: different address on CAP1114
- num_sensor_thresholds: separate value from num_channels for CAP1114
- has_repeat_en: repeat enable support, disabled by default on CAP1114
Include linux/bits.h, update the register operations related to LEDs.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-8-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Some CAP11xx devices (CAP1126/CAP1188) have a dedicated RESET pin.
Add hardware reset operation to improve device reliability and
ensure proper initialization on probe.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-7-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Remove unused register address macros and their corresponding
definitions in the cap11xx_reg_defaults array.
This cleanup reduces code clutter and makes the driver easier to
maintain without affecting functionality.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-3-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Duplicated device detection log exists at line 537 and line 542,
which brings redundant kernel print messages. Drop one redundant
log entry to clean up dmesg output.
Meanwhile add missing error logs when I2C communication fails
during driver probe(), helping debug.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-2-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Prepare input updates for 7.2 merge window.
|
|
The driver accesses the message payload (msg[0]) without checking if
the length is greater than zero. The parent MFD driver can produce a
payload with a length of 0, in which case msg[0] would be uninitialized
or stale.
Add a check to return early if len is less than 1.
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/aintAvTyw4CVb5hG@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The driver acquires the micro->lock spinlock in process context (in
micro_key_start() and micro_key_stop()) without disabling interrupts.
However, this lock is also acquired in hardirq context by the MFD core
rx handler (micro_rx_msg()) which is called from the serial ISR.
This can lead to a lock inversion deadlock if the interrupt fires on the
same CPU while the process context holds the lock.
Fix this by using guard(spinlock_irq) instead of guard(spinlock) in
micro_key_start() and micro_key_stop() to disable interrupts while
holding the lock.
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/aij-pfaKK-Nna7wf@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Embed the keycode array in the struct to have a single allocation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260609213532.25181-1-rosenp@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
After commit 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd -
do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID"), HONOR
BCC-N, aka HONOR MagicBook 14 2026's internal keyboard stops
working. Adding the atkbd_deactivate_fixup quirk fixes it.
DMI: HONOR BCC-N/BCC-N-PCB, BIOS 1.04 04/07/2026
Fixes: 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Reported-by: Hongfei Ren <lcrhf@outlook.com>
Link: https://github.com/colorcube/Linux-on-Honor-Magicbook-14-Pro/issues/1#issuecomment-4562679891
Tested-by: Hongfei Ren <lcrhf@outlook.com>
Cc: stable@kernel.org
Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Link: https://patch.msgid.link/20260605-honor-v1-1-78e05e491193@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The Lenovo Yoga Air 14 (83QK) laptop keyboard becomes unresponsive
after the standard atkbd init sequence. Controlled testing on the
actual hardware shows the F5 (ATKBD_CMD_RESET_DIS / deactivate)
command specifically corrupts the EC state, causing zero IRQ1
interrupts after init.
Skipping only the deactivate command (while keeping F4 ENABLE)
resolves the issue completely: both keystroke input and CapsLock
LED toggle work correctly. The reverse test - skipping only F4
while keeping F5 - makes the problem worse (zero keystroke
interrupts), confirming F5 is the sole culprit.
Add a DMI quirk entry for LENOVO/83QK using the existing
atkbd_deactivate_fixup callback, consistent with the existing
entries for LG Electronics and HONOR FMB-P that address the
same EC F5 deactivate issue.
Signed-off-by: Zeyu WANG <zeyu.thomas.wang@gmail.com>
Link: https://patch.msgid.link/20260602170909.14725-1-zeyu.thomas.wang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260515164848.497608-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There is an extraneous space before a newline in a dev_err message.
Remove it
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250729113147.1924862-1-colin.i.king@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add support for GPIO-based charlieplex keypad, allowing to control
N^2-N keys using N GPIO lines.
Reuse matrix keypad keymap to simplify, even if there is no concept
of rows and columns in this type of keyboard.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260312180304.3865850-5-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There is a spelling mistake in two comments. Fix them.
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Link: https://patch.msgid.link/20260418-imx-typo-v1-1-2a15e54ad4e7@ethancedwards.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Inline the i2c_check_functionality() check, since the function returns a
boolean status rather than an error code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260408141926.1181389-4-thorsten.blum@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Inline the i2c_check_functionality() check, since the function returns a
boolean status rather than an error code.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260408141926.1181389-3-thorsten.blum@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.
|
|
The driver currently calls device_init_wakeup() and manually toggles
IRQ wake in suspend and resume paths. This is unnecessary since the
I2C core already handles wakeup configuration when the device is
described in Device Tree with the "wakeup-source" property.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260309071413.92709-1-phucduc.bui@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Over the years we accumulated a number of formatting issues, fix them.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
