| Age | Commit message (Collapse) | Author |
|---|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
Add driver for Intel Computer Vision Sensing (CVS) devices found on
Intel Luna Lake (LNL), Panther Lake (PTL), and Arrow Lake (ARL)
platforms.
The CVS device acts as a V4L2 sub-device bridge that manages CSI-2
link ownership between the host (Linux) and firmware for camera
sensors. It provides:
- Query the device status via sysfs interface
- CSI-2 link ownership arbitration between host and CVS firmware
- MIPI CSI-2 configuration management
- Privacy LED control coordination
- Power management integration with runtime PM
The driver consists of two main components:
core.c: Core driver with probe, command transport, and power management
v4l2.c: V4L2 sub-device and media framework integration
Hardware Interface:
- I2C for command/control communication with device firmware
- GPIO signals for ownership handshaking (request/response)
- Optional reset and wake interrupt for full-capability variants
- Integration with Intel IPU via ipu_bridge
The driver supports two hardware capability levels:
- Light capability: Basic GPIO-based ownership (2 GPIOs)
- Full capability: Enhanced with reset control and wake IRQ (4 GPIOs)
Device-specific quirks are handled via a quirk table to accommodate
variations across different CVS implementations (Lattice, Synaptics).
In addition to I2C-based operation, the driver supports platform
device instantiation for systems where CVS is exposed without I2C
transport, falling back to GPIO-only ownership control.
The CVS driver integrates with the IPU bridge for automatic device
discovery via ACPI on supported platforms.
PCI device IDs for Intel IPU7 (0x645d, shared by MTL and LNL) and
IPU7.5 (0xb05d, shared by ARL and PTL) are included in the
driver-local icvs_pci_tbl lookup table, enabling CVS to locate these
IPU variants without modifying the shared ipu6-pci-table header.
A PM runtime device link is established between IPU (consumer) and CVS
(supplier) so that the PM framework automatically resumes CVS before
IPU begins streaming, triggering cvs_runtime_resume() to claim CSI-2
link ownership. Ownership is released via cvs_runtime_suspend() after
the autosuspend delay.
Signed-off-by: Miguel Vadillo <miguel.vadillo@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 13 9350 + IPU7
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Fix some typos, removed superfluous comments/code,
some minor code alignment.
Signed-off-by: Eugen Hristev <ehristev@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The current implementation of alvium_ctrl_init creates several controls in
function alvium_ctrl_init and uses the returned pointer without check. That
can cause write access over NULL-pointer for several controls. The reworked
code checks the pointers before adding flags.
Fixes: 0a7af872915e ("media: i2c: Add support for alvium camera")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Hecht <mhecht73@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace and commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The OV13B10 sensor driver currently handles a single regulator called
avdd, however the sensor can be supplied by up to three regulators.
Update the driver to handle all of them together using the regulator
bulk API.
Signed-off-by: Arun T <arun.t@intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The LM3559 is very similar to the LM3560, but it operates at much lower
currents. This may result in incorrect current selection if LM3560 ranges
are applied to the LM3559. Implement driver data matching to use
device-specific current configurations.
Since the driver no longer supports platform data and device configuration
is performed more granularly, move the remaining enums from the header
into the driver file and remove the header.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Add support for power management features to better control the LM3560
within the media framework. To achieve the desired PM support, the HWEN
GPIO and VIN power supply were added and configured into power on/off
sequences. Added PM operations along with the PM configuration setup.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Since there are no users of this driver via platform data, remove the
platform data support and switch to using Device Tree bindings.
Converting to Device Tree assumes dynamic and independent registration of
LEDs. To monitor the configured LEDs, a bitmap has been added. This makes
LED cleanup more robust and less context dependent.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Pass the device's own mutex lock to the control handler so that the media
framework can handle control access instead of managing it manually. The
lock must be common to both sub-devices since they share same hardware,
so the individual sub-device locks will not work here.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The existing driver does not call media subdev registration, making it
invisible to the media framework. Since the LM3560 supports two
independent LEDs, register each LED as a separate media entity.
Because registering LEDs before device initialization may cause access
attempts before the hardware is ready, lm3560_init_device has been moved
before the subdevice initializations.
An additional helper, lm3560_subdev_cleanup, was added to release LED0 if
the initialization of LED1 fails, and to deregister both LEDs in the
remove function.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Queued buffers are added to the tail of vid_cap_active in
buffer_queue(), but the capture kthread also retrieves buffers from
the tail of the list.
This makes the queue behave as LIFO instead of FIFO when multiple
buffers are queued.
Fix this by retrieving buffers from the head of the list.
Signed-off-by: Arash Golgol <arash.golgol@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The driver uses vb2_fop_release() as its file release operation, so
vb2_video_unregister_device() should be used instead of
video_unregister_device() during driver removal.
This ensures that the vb2 queue is properly disconnected before the
video device is unregistered.
Signed-off-by: Arash Golgol <arash.golgol@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
If the driver's chip information is invalid we can end up accessing an
invalid memory region.
This fixes the following false positive smatch errors:
drivers/media/i2c/adv7604.c:3672 adv76xx_probe() error: buffer overflow 'state->pads' 7 <= 4294967294
drivers/media/i2c/adv7604.c:3673 adv76xx_probe() error: buffer overflow 'state->pads' 7 <= u32max
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The current code makes smatch a bit uncomfortable:
drivers/media/i2c/mt9p031.c:799 mt9p031_s_ctrl() warn: assigning (-1952) to unsigned variable 'data'
Probably because smatch is not clever enough (yet). Do a simple rewrite
to make sure that smatch understands what we are doing here.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Remove kernel-doc comments from regular callback functions. These comments
have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Remove kernel-doc comments from regular callback functions. These comments
have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Remove kernel-doc comments from regular callback functions. These comments
have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Remove kernel-doc comments from regular callback functions. These comments
have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Remove kernel-doc comments from regular callback functions. These comments
have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Remove kernel-doc comments from regular callback functions. These
comments have no information value.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The driver UAPI is mode-based, allowing the user to choose a mode from a
small list based on the output size. The vertical blanking is set based on
the mode, do the same for horizontal blanking so the frame rate obtained
is constant.
Additionally, it's best to use a known-good horizontal blanking value as
choosing the value freely may affect image quality. While the minimum
value may not be the best value for horizontal blanking, at least it is
constant rather than a minimum value of a different configuration.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The driver used the maximum frame length in lines value of 0xffff, but the
maximum appears to be 0xfffe instead. Fix it.
Fixes: 1283b3b8f82b ("media: i2c: Add driver for Sony IMX219 sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The imx219 driver uses macros for denoting the size of the pixel array.
The values reflect the area of manufacturer-designated visible pixels,
reflect this in the naming by calling it "ACTIVE_AREA" instead of
"PIXEL_ARRAY".
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly. For Kconfig entries that have no other dependencies: convert
it to requiring OF to avoid new symbols popping up for everyone in make
config, for others just drop it altogether.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The I²C device id table is necessary as the device may be, besides through
system firmware, also instantiated in the IPU bridge so matching takes
place using the I²C device id table. Add back the table, with ids for all
supported devices.
Reported-by: Michael Anthony <manthony.nw@outlook.com>
Closes: https://lore.kernel.org/linux-media/AMBP190MB2678E7DC048409068260DCE8ED4AA@AMBP190MB2678.EURP190.PROD.OUTLOOK.COM/
Fixes: 15faf0fa1472 ("media: i2c: dw9719: Remove unused i2c device id table")
Cc: stable@vger.kernel.org # for v6.19 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new CSI tegra support, covering Tegra20 and Tegra30
- new camera sensor drivers: T4ka3 and ov2732
- m88ds3103: add 3103c chip support
- uvcvideo: add support for Intel RealSense D436/D555 and P010 pixel format
- synopsys csi2rx: add i.MX93 support
- imx8-isi: add i.MX95 support
- imx8mq-mipi-csi2: add i.MX8ULP support
- dw100: add V4L2 requests support
- support for DTV devices from Hauppauge got some improvements
- media staging: dropped starfive-camss driver
- media docs: document multi-committers model and improve maint profile
- media core:
- add v4l2_subdev_get_frame_desc_passthrough() helper
- improve error handling in fwnode parsing
- lots of driver fixes, cleanups and improvements
* tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (251 commits)
Revert "media: cx231xx: add USB ID 2040:8360 for Hauppauge WinTV-HVR-935"
media: synopsys: csi2rx: add i.MX93 support
media: dt-bindings: add NXP i.MX93 compatible string
media: synopsys: csi2rx: Use enum and u32 array for register offsets
media: synopsys: csi2rx: implement .get_frame_desc() callback
media: synopsys: csi2rx: only check errors from devm_clk_bulk_get_all()
media: synopsys: csi2rx: use devm_reset_control_get_optional_exclusive()
media: i2c: imx283: add support for non-continuous MIPI clock mode
media: i2c: ov08d10: add support for 24 MHz input clock
media: i2c: ov08d10: add support for reset and power management
media: i2c: ov08d10: add support for binding via device tree
dt-bindings: media: i2c: document Omnivision OV08D10 CMOS image sensor
media: i2c: ov08d10: add missing newline to prints
media: i2c: ov08d10: fix some typos in comments
media: i2c: ov08d10: remove duplicate register write
media: i2c: ov08d10: fix image vertical start setting
media: i2c: ov08d10: fix runtime PM handling in probe
staging: media: ipu7: Update TODO
media: Add t4ka3 camera sensor driver
media: i2c: Add ov2732 image sensor driver
...
|
|
Add support for selecting between continuous and non-continuous MIPI clock
mode.
Previously, the CSI-2 non-continuous clock endpoint flag was ignored and
the sensor was always configured for non-continuous clock mode. For
existing device tree nodes that do not have this property enabled, this
update will therefore change the actual clock mode.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The sensor supports an input clock in the range of 6 to 27 MHz. Currently,
the driver only supports a 19.2 MHz clock. Extend the driver so that at
least 24 MHz, which is a typical frequency for this sensor, can also be
used.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add support for the required power supplies as well as the control of an
optional sensor reset.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The OV08D10 can be used also on embedded designs using device tree so allow
the sensor to bind to a device tree node.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add trailing \n to dev_* prints where missing.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix some spelling errors in comments.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Register P1:0x33 is written twice with the same value in the
'lane_2_mode_1632x1224' sequence. Remove one unnecessary write access.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The current settings for the "image vertical start" register appear to be
incorrect. While this only results in an incorrect start line for native
modes, this faulty setting causes actual problems in binning mode. At least
on an i.MX8MP test system, only corrupted frames could be received.
To correct this, the recommended settings from the reference register sets
are used for all modes. Since this shifts the start by one line, the Bayer
pattern also changes, which has also been corrected.
Fixes: 7be91e02ed57 ("media: i2c: Add ov08d10 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Set the device's runtime PM status and enable runtime PM before registering
the async sub-device. This is needed to avoid the case where the device is
runtime PM resumed while runtime PM has not been enabled yet.
Remove the related, non-driver-specific comment while at it.
Fixes: 7be91e02ed57 ("media: i2c: Add ov08d10 camera sensor driver")
Cc: stable@vger.kernel.org
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The sub-device state lock has been already acquired when ccs_init_state()
is called. Do not try to acquire it again.
Reported-by: David Heidelberg <david@ixit.cz>
Fixes: a88883d1209c ("media: ccs: Rely on sub-device state locking")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add the t4ka3 driver from:
https://github.com/kitakar5525/surface3-atomisp-cameras.git
With many cleanups / changes (almost a full rewrite) to make it suitable
for upstream:
* Remove the VCM and VCM-OTP support, the mainline kernel models VCMs and
calibration data eeproms as separate v4l2-subdev-s.
* Remove the integration-factor t4ka3_get_intg_factor() support and IOCTL,
this provided info to userspace through an atomisp private IOCTL.
* Turn atomisp specific exposure/gain IOCTL into standard v4l2 controls.
* Use normal ACPI power-management in combination with runtime-pm support
instead of atomisp specific GMIN power-management code.
* Turn into a standard V4L2 sensor driver using
v4l2_async_register_subdev_sensor().
* Add vblank, hblank, and link-freq controls; drop get_frame_interval().
* Use CCI register helpers.
* Calculate values for modes instead of using fixed register-value lists,
allowing arbritrary modes.
* Add get_selection() and set_selection() support
* Add a CSI2 bus configuration check
This was tested on a Xiaomi Mipad2 tablet which has a T4KA3 sensor with
DW9761 VCM as back sensor.
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Co-developed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add a V4L2 subdevice driver for the Omnivision OV2732 sensor.
The OV2732 is a 1/4" color CMOS 1080p (1920x1080) HD image sensor with
programmable controls like: gain, exposure, frame rate, image and windowing
size, horizontal mirror, vertical flip, cropping.
Signed-off-by: Walter Werner Schneider <contact@schnwalter.eu>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
[Sakari Ailus: Squashed Walter's fixup.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Defer probe if endpoint is not yet available. And do it before acquiring
clock, gpio and regulators.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Dongchung's e-mail address returns a permanent error:
The following message to <dongchun.zhu@mediatek.com> was
undeliverable. The reason for the problem: 5.1.0 - Unknown address
error 550-'Relaying mail to dongchun.zhu@mediatek.com is not
allowed'
Remove the address.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Parse V4L2 device tree properties and register controls for them.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The control handler wasn't freed if adding controls failed, add an error
exit label and convert the existing error return to use it.
Fixes: 879347f0c258 ("media: ov8856: Add support for OV8856 sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The IMX355 sensor driver currently supports having 4 data lanes. There
can't be more or less, so check if the firmware specifies 4 lanes.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/aW3uFcT1zmiF4GUP@kekkonen.localdomain
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Some rc device drivers have a race condition between rc_unregister_device()
and irq or urb callbacks. This is because rc_unregister_device() does two
things, it marks the device as unregistered so no new commands can be
issued and then it calls rc_free_device(). This means the driver has no
chance to cancel any pending urb callbacks or interrupts after the device
has been marked as unregistered. Those callbacks may access struct rc_dev
or its members (e.g. struct ir_raw_event_ctrl), which have been freed by
rc_free_device().
This change removes the implicit call to rc_free_device() from
rc_unregister_device(). This means that device drivers can call
rc_unregister_device() in their remove or disconnect function, then cancel
all the urbs and interrupts before explicitly calling rc_free_device().
Note this is an alternative fix for an issue found by Haotian Zhang, see
the Closes: tags.
Reported-by: Haotian Zhang <vulab@iscas.ac.cn>
Closes: https://lore.kernel.org/linux-media/20251114101432.2566-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114101418.2548-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114101346.2530-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114090605.2413-1-vulab@iscas.ac.cn/
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Formats did not correctly decode prior.
Modifications are based off cx25840 datasheet.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Change from my company email address to gmail.com.
Signed-off-by: Martin Hecht <mhecht73@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
imx258_open(), imx258_enum_mbus_code(), and imx258_enum_frame_size()
call imx258_get_format_code() without holding imx258->mutex. However,
imx258_get_format_code() has lockdep_assert_held(&imx258->mutex)
indicating that callers must hold this lock.
All other callers of imx258_get_format_code() properly acquire the mutex:
- imx258_set_pad_format() acquires mutex at imx258.c:918
- imx258_get_pad_format() acquires mutex at imx258.c:896
The mutex is needed to protect access to imx258->vflip->val and
imx258->hflip->val which are used to calculate the bayer format code.
Add mutex_lock()/mutex_unlock() around the imx258_get_format_code()
calls in the affected functions to fix the missing lock protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
ar0521_probe()
The devm_gpiod_get_optional() function may return an error pointer
(ERR_PTR) in case of a genuine failure during GPIO acquisition, not just
NULL which indicates the legitimate absence of an optional GPIO.
Add an IS_ERR() check after the function call to catch such errors and
propagate them to the probe function, ensuring the driver fails to load
safely rather than proceeding with an invalid pointer.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
vgxy61_probe()
The devm_gpiod_get_optional() function may return an error pointer
(ERR_PTR) in case of a genuine failure during GPIO acquisition,
not just NULL which indicates the legitimate absence of an optional
GPIO.
Add an IS_ERR() check after the function call to catch such errors and
propagate them to the probe function, ensuring the driver fails to load
safely rather than proceeding with an invalid pointer.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
