| Age | Commit message (Collapse) | Author |
|---|
|
files)
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
|
|
The port_teardown() operation is optional. Yet, it is implemented by all
the KSZ switches through a common function that doesn't do anything for
the switches that aren't part of the ksz9477 family
Remove the implementation from the switches that don't need it.
Implement instead a ksz9477-specific port_teardown.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260608-clean-ksz-3rd-v2-10-6e61b7be23c4@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All the switches use a common mdio_register() function that uses two
ksz_dev_ops callbacks (.mdio_bus_preinit() and .create_phy_addr_map())
to handle the lan937x specific case. These two callbacks are used only
at this place in the code.
Implement a new lan937x-specific MDIO registration functions that uses
these two lan937x-specific functions. The lan937x bindings don't
have any 'interrupts' property so this lan937x_mdio_register() doesn't
call ksz_irq_phy_setup().
Expose the common ksz_*_mdio_{read/write} functions so they can be used
in lan937x.c
Remove the callbacks from ksz_dev_ops.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260608-clean-ksz-3rd-v2-9-6e61b7be23c4@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All switches implement the optional .port_hsr_join operation while only
the KSZ9477 truly supports it.
Remove the common port_hsr_join implementation.
Replace it with a specific implementation for the KSZ9477 case.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260608-clean-ksz-3rd-v2-8-6e61b7be23c4@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All the KSZ switches use common {get/set}_wol operations while only the
ksz9477 and the ksz87xx families really support it. These operations are
optional so there is no point implementing them to return -EOPNOTSUPP.
Remove the {get/set}_wol callbacks from the switch operations for the
ksz88xx, the ksz8463 and the lan937x families.
Remove the family check from the common {get/set}_wol implementation.
Note that is_ksz9477() is only true for the KSZ9477 so this change will
also add WoL support for the other switches using the
ksz9477_switch_ops. I checked their datasheet, they implement the same
PME_WOL registers, at the same addresses, so this should go fine.
Modify the ksz_wol_pre_shutdown() initial check to ensure consistency in
the WoL handling for these non-KSZ9477 switches using ksz9477_switch_ops.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260608-clean-ksz-3rd-v2-7-6e61b7be23c4@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The .support_eee() operation is optional. Yet, it is implemented by the
KSZ switches through a common functon that reports false for every chip
except for KSZ8563, KSZ9563 and KSZ9893 from the KSZ9477 family.
Remove the implementation from the switches that don't support EEE.
Also remove .set_mac_eee() for them as .set_mac_eee() is gated by the
`support_eee` presence in the core.
Implement instead a ksz9477-specific support_eee for these three supported
switches.
Note that comment /* KSZ879x/KSZ877x/KSZ876x Errata DS80000687C Module 2 */
is completely removed because it concerns the KSZ87xx family that doesn't
support at all EEE.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260608-clean-ksz-3rd-v2-6-6e61b7be23c4@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
setup_rgmii_delay() operation is only used once during the common phylink
MAC configuration. Only the lan937x switch implements this
setup_rgmii_delay().
Remove the setup_rgmii_delay operation from ksz_dev_ops.
Implement a lan937x-specific phylink MAC configuration that does this
RGMII delay setup.
Export ksz_set_xmii since it's needed by the lan937x implementation.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260608-clean-ksz-3rd-v2-5-6e61b7be23c4@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The common .mac_config() implementation checks some conditions before
doing any register access. As this common implementation is about to be
split in the upcoming patch, these checks would lead to code
duplication.
Wrap all the checks in a need_config() function that returns true when
the driver really need to access the switch registers to configure the
MAC.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260608-clean-ksz-3rd-v2-4-6e61b7be23c4@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The common ksz_get_phy_flags() is used by all the switches to implement
the optional .get_phy_flags DSA operation. It always returns 0 except
for KSZ88X3 switches where an errata has to be handled.
Make ksz_get_phy_flags() ksz88xx-specific.
Remove the get_phy_flags implementation for the switches that don't need
it.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260608-clean-ksz-3rd-v2-3-6e61b7be23c4@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KSZ8463 uses the common KSZ8 implementation for its VLAN operations.
This implementation returns -ENOTSUPP for the KSZ8463 case, which is
pointless.
Remove the VLAN operations from the ksz8463_switch_ops so the core can
directly return -ENOTSUPP.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260608-clean-ksz-3rd-v2-2-6e61b7be23c4@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All the KSZ switches share a common implementation of the
cls_flower_{add/del} operations. These common implementations return
ksz9477-specific implementations for the KSZ9477 family and -EOPNOTSUPP
for the others. -EOPNOTSUPP is already returned by the DSA core when
the operation isn't implemented.
Remove the common implementations.
Directly link the ksz9477_cls_flower_{add/del}() to the KSZ9477 callback.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260608-clean-ksz-3rd-v2-1-6e61b7be23c4@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the KSZ87xx short cable workaround.
This patch implements the KSZ87xx short cable erratum
described in Microchip document DS80000687C for KSZ87xx switches
and the following support article:
Link: https://support.microchip.com/s/article/Solution-for-Using-CAT-5E-or-CAT-6-Short-Cable-with-a-Link-Issue-for-the-KSZ8795-Family
The issue affects short or low-loss cable links (e.g. CAT5e/CAT6),
where the PHY receiver equalizer may amplify high-amplitude signals
excessively, resulting in internal distortion and link establishment
failures.
KSZ87xx devices require a workaround for the Module 3 low-loss cable
condition, controlled through the switch TABLE_LINK_MD_V indirect
registers.
This change models the erratum handling as vendor-specific Clause 22 PHY
registers, virtualized by the KSZ8 DSA driver and accessed via
ksz8_r_phy() / ksz8_w_phy(). The following controls are provided:
- A boolean “short-cable” preset, which applies a documented and
conservative configuration (LPF 62 MHz bandwidth and DSP EQ initial
value 0), and is the recommended interface for typical use cases.
- Separate LPF bandwidth and DSP EQ initial value controls intended for
advanced or experimental tuning. These are orthogonal and independent,
and override the corresponding settings without requiring any specific
ordering.
The preset and tunables act as simple setters with no implicit state
machine or invalid combinations, keeping the API predictable and aligned
with the KISS principle.
The erratum affects the shared PHY analog front-end and therefore applies
globally to the switch.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Fidelio Lawson <fidelio.lawson@exotec.com>
Link: https://patch.msgid.link/20260609-ksz87xx_errata_low_loss_connections-v10-1-9ba4418cf3db@exotec.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phy_read() and phy_write() are handled through common functions that
redirect the treatment to ksz_dev_ops callbacks. This layer of
indirection isn't needed since we now have a dsa_switch_ops for each
kind of switch
Remove one indirection layer for KSZ switches, by connecting the
ksz_dev_ops::phy_r() and ksz_dev_ops::phy_w() operations directly to
dsa_switch_ops.
Remove the now unused phy_r()/phy_w() callbacks from ksz_dev_ops.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-8-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ksz_sw_mdio_read() and ksz_sw_mdio_write() respectively call
ksz_dev_ops::phy_r() and ksz_dev_ops::phy_w() just like
dsa_switch_ops::phy_read() and dsa_switch_ops::phy_write() do.
Call dsa_switch_ops::phy_read() from ksz_sw_mdio_read() and
dsa_switch_ops::phy_write() from ksz_sw_mdio_write() so we'll be able
to get rid of the useless indirections provided by ksz_dev_ops in
upcoming patch.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-7-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
port_setup() is handled through a common function that redirects
the treatment to ksz_dev_ops callbacks. This layer of indirection
isn't needed since we now have a dsa_switch_ops for each switch family
Remove one indirection layer for KSZ switches, by connecting the
ksz_dev_ops :: port_setup() operations directly to dsa_switch_ops.
Make ksz9477_set_default_prio_queue_mapping() non-static since it's used
by ksz_common for tc operations and by ksz9477.c for this port_setup().
Remove the now unused port_setup() callback from ksz_dev_ops.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-6-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All switch families have been converted to have their own
ds->ops->setup() methods and to call the common ksz_teardown().
Remove the no longer used ksz_setup() function and the associated
ksz_dev_ops callbacks.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-5-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The KSZ switch families are sufficiently different that a common
ds->ops->setup() - ksz_setup() with micro-managed dev_ops->reset(),
dev_ops->pcs_create(), dev_ops->config_cpu_port(),
dev_ops->enable_stp_addr(), dev_ops->setup() seems to be too convoluted.
I am proposing to make each KSZ switch family part ways for
dsa_switch_ops :: setup() and teardown(), to allow them greater
flexibility. This here is the implementation for ksz8, which is
nothing other than a copy of ksz_setup() with the dev_ops function
pointers replaced with direct function calls.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-4-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The KSZ switch families are sufficiently different that a common
ds->ops->setup() - ksz_setup() with micro-managed dev_ops->reset(),
dev_ops->pcs_create(), dev_ops->config_cpu_port(),
dev_ops->enable_stp_addr(), dev_ops->setup() seems to be too convoluted.
I am proposing to make each KSZ switch family part ways for
dsa_switch_ops :: setup() and teardown(), to allow them greater
flexibility. This here is the implementation for ksz9477, which is
nothing other than a copy of ksz_setup() with the dev_ops function
pointers replaced with direct function calls.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-3-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The KSZ switch families are sufficiently different that a common
ds->ops->setup() - ksz_setup() with micro-managed dev_ops->reset(),
dev_ops->pcs_create(), dev_ops->config_cpu_port(),
dev_ops->enable_stp_addr(), dev_ops->setup() seems to be too convoluted.
I am proposing to make each KSZ switch family part ways for
dsa_switch_ops :: setup() and teardown(), to allow them greater
flexibility. This here is the implementation for lan937x, which is
nothing other than a copy of ksz_setup() with the dev_ops function
pointers replaced with direct function calls.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-2-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ksz_switch driver is one of the few which reset the switch when
unbinding the driver or shutting down - in the same category with
ar9331_sw_remove(), bcm_sf2_sw_remove(), and ks8995_remove(),
vsc73xx_remove() and lan9303_remove().
I don't think there exists any requirement to do this, and in fact it
does create complications for WoL, as the code already shows.
My issue with this logic is that it is the only thing keeping
dev_ops->reset() necessary, which I would like to remove after
individual KSZ switch families get their own setup() and teardown()
methods that don't go through dev_ops.
Don't reset the switch when unbinding the driver or shutting down.
Remove the exit callbacks from the ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-1-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching these arrays, unify usage of whitespace in the list
terminator.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260519145722.1590298-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ksz_phylink_get_caps() is a bit different from other generic methods.
It has a dev_ops->get_caps() call in the middle of the function, and it
does other stuff before (set some supported_interfaces) and after (set
lpi_interfaces from supported_interfaces).
Whereas the dev_ops->get_caps() methods set mac_capabilities and
(optionally) logically OR the supported_interfaces with that of the PCS.
The idea is that this can be expressed simpler, and avoid a indirect
function call to dev_ops->get_caps(). If we tail-call the common
ksz_phylink_get_caps() from individual phylink_get_caps() methods, we do
reorder the settings, but in an inconsequential way (the transfer from
supported_interfaces to lpi_interfaces still sees a complete list of the
supported_interfaces).
Remove the no longer used get_caps() callbacl the ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-7-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mirror operations are handled through a common function that redirects
the treatment to ksz_dev_ops callbacks. This layer of indirection isn't
needed since we now have a dsa_switch_ops for each switch family.
Remove this indirection layer for KSZ switches, by connecting the
ksz_dev_ops :: mirror_add() and mirror_del() operations directly to
dsa_switch_ops.
Remove the now unused mirror callbacks from ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-6-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
FDB and MDB operations are handled through a common function that
redirects the treatment to ksz_dev_ops callbacks. This layer of
indirection isn't needed since we now have a dsa_switch_ops for each kind
of switch.
Remove one indirection layer for KSZ switches, by connecting the
ksz_dev_ops :: fdb_dump(), fdb_add(), fdb_del(), mdb_add() and mdb_del()
operations directly to dsa_switch_ops.
Remove the FDB and MDB operations from ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-5-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
VLAN operations are handled through a common function that redirects the
treatment to ksz_dev_ops callbacks. This level of indirection isn't
needed since we now have a dsa_switch_ops for each kind of switch.
Remove this useless layer of indirection by connecting directly the VLAN
operations to the relevant dsa_switch_ops.
Adapt their prototypes to match dsa_switch_ops expectations.
Remove the now unused VLAN callbacks from ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-4-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MTU changing is done through a common function that redirects the
treatment to a specific ksz_dev_ops callback. This layer of indirection
isn't needed since we now have a dsa_switch_ops struct for each switch
family.
Remove this indirection layer in MTU changing for KSZ switches, by
directly connecting the ksz_dev_ops :: change_mtu() implementations to
dsa_switch_ops.
Remove the no longer used change_mtu() callback from ksz_dev_ops
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-3-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dsa_switch_ops :: set_ageing_time() goes through ksz_set_ageing_time(),
further dispatched through ksz_dev_ops :: set_ageing_time(). Only
ksz9477 and lan937x provide an implementation for this, so remove the
(optional) method from ksz8463_switch_ops, ksz87xx_switch_ops,
ksz88xx_switch_ops. Also, hook up ksz9477 and lan937x dsa_switch_ops
directly to their respective implementations.
Every switch family provides a dsa_switch_ops :: port_fast_age()
implementation, which is dispatched through ksz_dev_ops ::
flush_dyn_mac_table(). Remove the dev_ops indirection and connect the
flush_dyn_mac_table() methods directly to their respective dsa_switch_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-2-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ksz_dev_ops::phylink_mac_link_up() isn't used anywhere.
Remove it.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-1-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All the KSZ switches use the same ksz_connect_tag_protocol while they
don't support all the KSZ tag protocols. So if, for some reason, a given
switch tries to connect another KSZ tag protocol, it won't fail.
Split the common ksz_connect_tag_protocol() into switch-specific
operations. This way, each switch will only accept to connect the tag
protocol it supports.
Remove the no longer used common operation.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-9-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All the switch families use a common function to implement
.get_tag_protocol(). This function then returns the relevant protocol
depending on the chip ID.
Make the protocol to dsa_switch_ops association a little bit more
obvious by having separate implementations.
Change made by manually checking which chip id has which dsa_switch_ops
assigned to it, then filtering the common ksz_get_tag_protocol() for
just those chip IDs pertaining to it.
As an important benefit, we no longer have that weird-looking
DSA_TAG_PROTO_NONE fallback which was never actually returned.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-8-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that each switch driver has its own dsa_switch_ops (currently a copy
of ksz_switch_ops), we no longer need ksz_switch_ops and can remove it.
Get to the driver-specific dsa_switch_ops through the ksz_chip_data
structure.
Reorder the alloc()/get_match_data() calls such as to have that
pointer available.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-7-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently we have a single dsa_switch_ops for 4 very distinct families
of switches, and many dsa_switch_ops methods are simply a dispatches
through ksz_dev_ops. That creates an avoidable level of indirection.
As a preparation for removing that indirection layer, create a separate
dsa_switch_ops structure wherever we have a ksz_dev_ops. These
structures are not yet used - ksz_switch_ops from ksz_common.c still is.
However, this reduces the noise from subsequent changes.
All new dsa_switch_ops are exact copies of ksz_switch_ops. But we need
to export function prototypes from ksz_common.c so that they are
callable from individual drivers.
Note that "individual drivers" are not actual separate kernel modules.
All of ksz8.c, ksz9477.c and lan937x_main.c are part of the same
ksz_switch.ko. Only the "register interface" drivers are different
modules (ksz9477_i2c.o for I2C, ksz_spi.o for SPI, ksz8863_smi.o for
MDIO). So we don't need to export any symbol.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-6-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to ksz_dev_ops, struct phylink_mac_ops shouldn't be part of
the common code. Instead, the common code should provide callable
functionality.
Invert the paradigm and export the common aspects from ksz_common.c, and
move the chip-specific stuff in individual drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-5-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ksz_dev_ops() are specific to each switch family so they should
belong to the individual drivers instead of the common section.
Move the ksz_dev_ops() definitions of the KSZ9477 and the LAN937 to
their individual drivers.
Set static the functions that aren't exported anymore.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-4-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ksz_dev_ops() are specific to each switch family so they should
belong to the individual drivers instead of the common section.
Move the ksz_dev_ops() definitions of the KSZ8xxx to ksz8.c
Set static the functions that aren't exported anymore.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-3-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ksz_dev_ops :: port_cleanup() isn't used anywhere.
Remove it.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-2-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ksz8_all_queues_split() isn't used anywhere.
Remove it.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-1-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SGMII support has been added to ksz9477, we can drop the comment saying
that it'll be added later.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260324180826.524327-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ksz_dev_ops .pcs_create() is called under the assumption that the
switch has a PCS port :
if (ksz_has_sgmii_port(dev) && dev->dev_ops->pcs_create) {
ret = dev->dev_ops->pcs_create(dev);
[...]
}
The KSZ9477 implementation of .pcs_create() does the same check on
ksz_has_sgmii_port(), and protects the entire function with it.
Drop it, saving a level of indentation and increasing readability.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260324180826.524327-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The KSZ9477 maintains the SGMII port's state for speed, duplex and link
status to be able to fixup the accesses to its internal older version of
the Designware XPCS. However, it does so by embedding a full instance of
struct phy_device, only to use the 'speed', 'link' and 'duplex' fields.
This is also only used for the SGMII port, it's otherwise unused for all
other regular ports.
Replace that with simple int/bool values.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260319181705.1576679-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If request_threaded_irq() fails during the PTP message IRQ setup, the
newly created IRQ mapping is never disposed. Indeed, the
ksz_ptp_irq_setup()'s error path only frees the mappings that were
successfully set up.
Dispose the newly created mapping if the associated
request_threaded_irq() fails at setup.
Cc: stable@vger.kernel.org
Fixes: d0b8fec8ae505 ("net: dsa: microchip: Fix symetry in ksz_ptp_msg_irq_{setup/free}()")
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260309-ksz-ptp-irq-fix-v1-1-757b3b985955@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Timestamps are directly accessed through a register read in the
interrupt handler. KSZ8463's logic to access it will be a bit more
complex because the same interrupt can be triggered by two different
timestamps being ready.
Wrap the timestamp's reading in a dedicated function to ease the
KSZ8463's integration in upcoming patches.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-9-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Accesses to the PTP_MSG_CONF1 register are done through a hardcoded
address which doesn't match with the KSZ8463's register layout.
Add a new entry for the PTP_MSG_CONF1 register in the regs[] tables.
Use the regs[] table to retrieve the PTP_MSG_CONF1 register address
when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-8-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Accesses to the PTP_SUBNANOSEC_RATE register are done through a
hardcoded address which doesn't match with the KSZ8463's register
layout.
Add a new entry for the PTP_SUBNANOSEC_RATE register in the regs[]
tables.
Use the regs[] table to retrieve the PTP_SUBNANOSEC_RATE register
address when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-7-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Accesses to the PTP_RTC_SUB_NANOSEC register are done through a
hardcoded address which doesn't match with the KSZ8463's register
layout.
Add a new entry for the PTP_RTC_SUB_NANOSEC register in the regs[]
tables.
Use the regs[] table to retrieve the PTP_RTC_SUB_NANOSEC register
address when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-6-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Accesses to the PTP_RTC_SEC register are done through a hardcoded
address which doesn't match with the KSZ8463's register layout.
Add a new entry for the PTP_RTC_SEC register in the regs[] tables.
Use the regs[] table to retrieve the PTP_RTC_SEC register address
when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-5-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Accesses to the PTP_RTC_NANOSEC register are done through a hardcoded
address which doesn't match with the KSZ8463's register layout.
Add a new entry for the PTP_RTC_NANOSEC register in the regs[] tables.
Use the regs[] table to retrieve the PTP_RTC_NANOSEC register address
when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-4-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Accesses to the PTP_CLK_CTRL register are done through a hardcoded
address which doesn't match with the KSZ8463's register layout.
Add a new entry for the PTP_CLK_CTRL register in the regs[] tables.
Use the regs[] table to retrieve the PTP_CLK_CTRL register address
when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-3-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
