| Age | Commit message (Collapse) | Author |
|---|
|
Breno reports following splats on mlx5:
RTNL: assertion failed at net/core/dev.c (2241)
WARNING: net/core/dev.c:2241 at netif_state_change+0xed/0x130, CPU#5: ethtool/1335
RIP: 0010:netif_state_change+0xf9/0x130
Call Trace:
<TASK>
__linkwatch_sync_dev+0xea/0x120
ethtool_op_get_link+0xe/0x20
__ethtool_get_link+0x26/0x40
linkstate_prepare_data+0x51/0x200
ethnl_default_doit+0x213/0x470
genl_family_rcv_msg_doit+0xdd/0x110
Looks like I missed ethtool_op_get_link() trying to sync linkwatch,
which needs rtnl_lock. Not all drivers do this - bnxt doesn't,
it just returns the link state, so add an opt-in bit.
Reported-by: Breno Leitao <leitao@debian.org>
Fixes: 45079e00133e ("net: ethtool: optionally skip rtnl_lock on Netlink path for GET ops")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Breno Leitao <leitao@debian.org>
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260624190439.2521219-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DQO RX datapath programs a per-buffer-queue-descriptor
header_buf_addr at post time and reads the split header back at
completion time. Both the post and the read currently index the
header buffer by queue position rather than by the buffer's identity:
- post (gve_rx_post_buffers_dqo): header_buf_addr is computed from
bufq->tail
- read (gve_rx_dqo): the header is read from desc_idx (the completion
queue head index)
This relies on the buffer-queue index and the completion-queue index
being equal for the start of every packet, i.e. on the device consuming
posted buffers and returning completions in the exact same order. That
assumption does not hold once HW-GRO is enabled with multiple
flows: coalesced segments are accepted and completed in an order that
may differ from the order buffers were posted, and segments from
different flows may interleave.
That results in two problems:
1. Wrong header slot on read. Because the read offset is derived from
the completion index (desc_idx) while the device wrote the header to
the address programmed for the buffer's buf_id, the driver can copy
a header belonging to a different packet. This shows up as
throughput drop (about 30% drop and large numbers of TCP
retransmissions) with header-split and HW-GRO both enabled and many
streams.
2. Header buffer reused while still owned by the device. The driver
advances bufq->head by one per completion and re-posts buffers based
on that. Arrival of N RX completions only guarantees that at least N
RX buffer descriptors have been read by the device. It does not
guarantee that the device has relinquished the ownership of all the
buffers corresponding to those N descriptors. With out-of-order
completions (e.g. the completion for a packet copied into buffer N
arrives before the completion for a packet copied into buffer N-1),
the driver can re-post and overwrite a header buffer that the device
is still going to write into, corrupting the header of a packet
whose completion has not yet been processed.
Fix both issues by indexing the header buffer by buf_id on both the post
and read paths. Reading from buf_id's slot is therefore always correct
regardless of completion ordering (fixes problem 1).
Indexing by buf_id also ties each header slot to the lifetime of its
buffer state. A buffer state is only returned to the free/recycle lists
when its own completion (buf_id) is processed, so its header slot can
only be re-posted after the device is done with it. This makes header
slot reuse safe under out-of-order completions (fixes problem 2).
Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the
header buffers based on num_buf_states to match the buf_id indexing.
Cc: stable@vger.kernel.org
Fixes: 5e37d8254e7f ("gve: Add header split data path")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260617013208.3781453-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make ethtool not take rtnl_lock for SET commands when operation
is performed on an ops-locked driver. cfg/cfg_pending are now
ops-locked, since only ethtool modifies them.
Some SET driver callbacks will still need rtnl_lock, most notably
those which may end up calling netdev_update_features() or the qdisc
layer (via netif_set_real_num_tx_queues()). Let drivers selectively
opt back into the rtnl_lock with a new bitfield in ops.
We need two helpers since Netlink and ioctl cmds have different
values. Keep the helpers side by side in common.h to make sure
they get updated together, even tho they will only get called
from ioctl.c and netlink.c.
SET commands which don't use ethnl_default_set_doit() are converted
by subsequent commits.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethnl_default_doit() and ethnl_default_dump_one() are both used
exclusively for GET callbacks (former to get info for a single
device or get global strings). ops-locked devices don't need
rtnl_lock for GET callbacks, stop taking it.
Introduce an opt-out mechanism for devices which use phylink (fbnic)
since phylink currently depends on rtnl_lock protection. Subsequent
patches will add more exceptions, anyway. Practically the new helpers
for judging if command needs rtnl_lock could also call
netdev_need_ops_lock() but I find that it makes the code in the callers
slightly less obvious.
Add a helper for IOCTLs already, even tho it's unused so that
we can keep them in sync as the series progresses.
This is the first user-visible step of moving ethtool ops out
from under rtnl. Subsequent patches do the same for SET ops,
as well as the ioctl path.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 9587ed8137fb83d93f84b858337412f4500b21e9,
reversing changes made to bcdfd9fb109e0c9d76c345b2346b6b75ed1f476d.
Per tglx's objections: https://lore.kernel.org/87mrxtwzz9.ffs@tglx
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable chrony and phc2sys to synchronize system clock to NIC clock.
Two paths are implemented: a precise path using system counter values
sampled by the device, and a fallback path using system counter values
sampled in the driver using ptp_read_system_prets()/postts().
To use the precise path, the current system clocksource must match the
units returned by the device, which on x86 is X86_TSC and on ARM64 is
ARM_ARCH_COUNTER. The clockid requested for the cross-timestamp must
be either CLOCK_REALTIME or CLOCK_MONOTONIC_RAW. These conditions hold
by default on GCP VMs using Chrony, so we expect the precise path to be
used the vast majority of the time. If the system clocksource is changed
to kvm-clock, it activates the fallback path. Ethtool counters have been
added to count how many times each path is used.
The uncertainty window in the precise path is typically around 1-2us,
while in the fallback path is around 60-80us.
Stub implementions of adjfine and adjtime are added to avoid NULL
dereference when phc2sys tries to adjust the clock.
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kevin Yang <yyd@google.com>
Reviewed-by: Naman Gulati <namangulati@google.com>
Signed-off-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260514225842.110706-4-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a mutex to protect the shared DMA buffer that receives NIC
timestamp reports. The NIC timestamp will be read from two different
threads: the periodic worker and upcoming `gettimex64`.
Move clock registration to the last step of initialization to ensure
that all data needed by the clock module is initialized before
the clock is exposed to usermode.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Ankit Garg <nktgrg@google.com>
Signed-off-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260514225842.110706-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
AdminQ commands may return -EAGAIN under certain transient conditions.
These commands are intended to be retried by the driver, so logging
a formal error to the system log is misleading and creates
unnecessary noise.
Modify the logging logic to skip the error message when the result
is -EAGAIN, and move logging to dev_err_ratelimited() to avoid
spamming the log.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260514225842.110706-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Devices that support netmem TX previously set dev->netmem_tx = true.
This was checked in validate_xmit_unreadable_skb() to drop unreadable
skbs (skbs with dmabuf-backed frags) before they reach drivers that
would mishandle them or devices that would not have the iommu mappings
for them.
A subsequent patch will introduce a third state for virtual devices
that forward unreadable skbs without ever performing DMA on them. To
prepare for that, convert the boolean dev->netmem_tx into an enum:
NETMEM_TX_NONE - no netmem TX support (drop unreadable skbs)
NETMEM_TX_DMA - full support, device does DMA
Update the existing NIC drivers (bnxt, gve, mlx5, fbnic) and the
validators in net/core to use the new enum. No functional change.
Acked-by: Harshitha Ramamurthy <hramamurthy@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260514-tcp-dm-netkit-v5-1-408c59b91e66@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch to the generic power management and remove the usage of legacy
(pci_driver) hooks.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260506165015.641738-1-vaibhavgupta40@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable support for UDP GSO when using DQO format. Advertise the feature
flag during device initialization and enable offload by default.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260306224816.3391551-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change the driver's default behavior to enable hw-gro whenever supported
for device.
Performance observations:
- We observed ~10% improvement in RX single stream throughput across
various MTU sizes.
- No change in TCP_RR/TCP_CRR latencies
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20260303195549.2679070-5-joshwash@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, in DQO mode with hw-gro enabled, entire received packet is
placed into skb fragments when header-split is disabled. This leaves
the skb linear part empty, forcing the networking stack to do multiple
small memory copies to access eth, IP and TCP headers.
This patch adds a single memcpy to put all headers into linear portion
before packet reaches the SW GRO stack; thus eliminating multiple
smaller memcpy calls.
Additionally, the criteria for calling napi_gro_frags() was updated.
Since skb->head is now populated, we instead check if the SKB is the
cached NAPI scratchpad to ensure we continue using the zero-allocation
path.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20260303195549.2679070-4-joshwash@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Leaving gso_segs unpopulated on hardware GRO packet prevents further
coalescing by software stack because the kernel's GRO logic marks the
SKB for flush because the expected length of all segments doesn't match
actual payload length.
Setting gso_segs correctly results in significantly more segments being
coalesced as measured by the result of dev_gro_receive().
gso_segs are derived from payload length. When header-split is enabled,
payload is in the non-linear portion of skb. And when header-split is
disabled, we have to parse the headers to determine payload length.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20260303195549.2679070-3-joshwash@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The device behind DQO format has always coalesced packets per stricter
hardware GRO spec even though it was being advertised as LRO.
Update advertised capability to match device behavior.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20260303195549.2679070-2-joshwash@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The gVNIC device indicates a device option (MODIFY_RING) to the driver,
which presents a range of ring sizes from which the user is allowed to
select. But in DQO-QPL queue format, the driver ignores the "max" of
this range and instead allows the user to configure the ring size in the
range [min, default]. This was done because increasing the ring size
could result in the number of registered pages being higher than the max
allowed by the device.
In order to support large ring sizes, stop ignoring the "max" of the
range presented in the MODIFY_RING option.
Signed-off-by: Matt Olson <maolson@google.com>
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20260225182342.1049816-3-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For DQO, change QPL page registration logic to be more flexible to honor
the "max_registered_pages" parameter from the gVNIC device.
Previously the number of RX pages per QPL was hardcoded to twice the
ring size, and the number of TX pages per QPL was dictated by the device
in the DQO-QPL device option. Now [in DQO-QPL mode], the driver will
ignore the "tx_pages_per_qpl" parameter indicated in the DQO-QPL device
option and instead allocate up to (tx_queue_length / 2) pages per TX QPL
and up to (rx_queue_length * 2) pages per RX QPL while keeping the total
number of pages under the "max_registered_pages".
Merge DQO and GQI QPL page calculation logic into a unified
gve_update_num_qpl_pages function. Add rx_pages_per_qpl to the priv
struct for consumption by both DQO and GQI.
Signed-off-by: Matt Olson <maolson@google.com>
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20260225182342.1049816-2-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
|
|
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers.
Cc: stable@vger.kernel.org
Fixes: a6fb8d5a8b69 ("gve: Tx path for DQO-QPL")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260220215324.1631350-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Now that the kernel doesn't insert HBH for BIG TCP IPv6 packets, remove
unnecessary steps from the gve TX path, that used to check and remove
HBH.
Signed-off-by: Alice Mikityanska <alice@isovalent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260205133925.526371-10-alice.kernel@fastmail.im
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc9).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
3125fc1701694 ("net: spacemit: k1-emac: fix jumbo frame support")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aYIysFIE9ooavWia@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The gve driver's "rx_dropped" statistic, exposed via `ethtool -S`,
incorrectly includes `rx_buf_alloc_fail` counts. These failures
represent an inability to allocate receive buffers, not true packet
drops where a received packet is discarded. This misrepresentation can
lead to inaccurate diagnostics.
This patch rectifies the ethtool "rx_dropped" calculation. It removes
`rx_buf_alloc_fail` from the total and adds `xdp_tx_errors` and
`xdp_redirect_errors`, which represent legitimate packet drops within
the XDP path.
Cc: stable@vger.kernel.org
Fixes: 433e274b8f7b ("gve: Add stats for gve.")
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Matt Olson <maolson@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC.
Cc: stable@vger.kernel.org
Fixes: 24aeb56f2d38 ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: Debarghya Kundu <debarghyak@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc8).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
2c84959167d64 ("net: spacemit: Check for netif_carrier_ok() in emac_stats_update()")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aXjAqZA3iEWD_DGM@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If timestamping is supported, GVE reads the clock during probe,
which can fail for various reasons. Previously, this failure would
abort the driver probe, rendering the device unusable. This behavior
has been observed on production GCP VMs, causing driver initialization
to fail completely.
This patch allows the driver to degrade gracefully. If gve_init_clock()
fails, it logs a warning and continues loading the driver without PTP
support.
Cc: stable@vger.kernel.org
Fixes: a479a27f4da4 ("gve: Move gve_init_clock to after AQ CONFIGURE_DEVICE_RESOURCES call")
Signed-off-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Shachar Raindel <shacharr@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260127010210.969823-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pavel Begunkov says:
====================
Add support for providers with large rx buffer
Many modern NICs support configurable receive buffer lengths, and zcrx and
memory providers can use buffers larger than 4K to improve performance.
When paired with hw-gro larger rx buffer sizes can drastically reduce
the number of buffers traversing the stack and save a lot of processing
time. It also allows to give to users larger contiguous chunks of data.
Single stream benchmarks showed up to ~30% CPU util improvement.
E.g. comparison for 4K vs 32K buffers using a 200Gbit NIC:
packets=23987040 (MB=2745098), rps=199559 (MB/s=22837)
CPU %usr %nice %sys %iowait %irq %soft %idle
0 1.53 0.00 27.78 2.72 1.31 66.45 0.22
packets=24078368 (MB=2755550), rps=200319 (MB/s=22924)
CPU %usr %nice %sys %iowait %irq %soft %idle
0 0.69 0.00 8.26 31.65 1.83 57.00 0.57
This series adds net infrastructure for memory providers configuring
the size and implements it for bnxt. It's an opt-in feature for drivers,
they should advertise support for the parameter in the qops and must check
if the hardware supports the given size. It's limited to memory providers
as it drastically simplifies implementation. It doesn't affect the fast
path zcrx uAPI, and the user exposed parameter is defined in zcrx terms,
which allows it to be flexible and adjusted in the future.
A liburing example can be found at [2]
full branch:
[1] https://github.com/isilence/linux.git zcrx/large-buffers-v8
Liburing example:
[2] https://github.com/isilence/liburing.git zcrx/rx-buf-len
* tag 'net-queue-rx-buf-len-v9' of https://github.com/isilence/linux:
io_uring/zcrx: document area chunking parameter
selftests: iou-zcrx: test large chunk sizes
eth: bnxt: support qcfg provided rx page size
eth: bnxt: adjust the fill level of agg queues with larger buffers
eth: bnxt: store rx buffer size per queue
net: pass queue rx page size from memory provider
net: add bare bone queue configs
net: reduce indent of struct netdev_queue_mgmt_ops members
net: memzero mp params when closing a queue
====================
Link: https://patch.msgid.link/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We'll need to pass extra parameters when allocating a queue for memory
providers. Define a new structure for queue configurations, and pass it
to qapi callbacks. It's empty for now, actual parameters will be added
in following patches.
Configurations should persist across resets, and for that they're
default-initialised on device registration and stored in struct
netdev_rx_queue. We also add a new qapi callback for defaulting a given
config. It must be implemented if a driver wants to use queue configs
and is optional otherwise.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
|
|
Convert the Google Virtual Ethernet (GVE) driver to use the new
.get_rx_ring_count ethtool operation instead of handling
ETHTOOL_GRXRINGS in .get_rxnfc. This simplifies the code by moving the
ring count query to a dedicated callback.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260105-gxring_google-v2-1-e7cfe924d429@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context.
Cc: stable@vger.kernel.org
Fixes: 1dfc2e46117e ("gve: Refactor napi add and remove functions")
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20251219102945.2193617-1-hramamurthy@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
commit 46e7860ef941 ("gve: Move ptp_schedule_worker to gve_init_clock")
moved the first invocation of the AQ command REPORT_NIC_TIMESTAMP to
gve_probe(). However, gve_init_clock() invoking REPORT_NIC_TIMESTAMP is
not valid until after gve_probe() invokes the AQ command
CONFIGURE_DEVICE_RESOURCES.
Failure to do so results in the following error:
gve 0000:00:07.0: failed to read NIC clock -11
This was missed earlier because the driver under test was loaded at
runtime instead of boot-time. The boot-time driver had already
initialized the device, causing the runtime driver to successfully call
gve_init_clock() incorrectly.
Fixes: 46e7860ef941 ("gve: Move ptp_schedule_worker to gve_init_clock")
Reviewed-by: Ankit Garg <nktgrg@google.com>
Signed-off-by: Tim Hostetler <thostet@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251202200207.1434749-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tx->dropped_pkt counter is a 64-bit integer that is incremented
directly. On 32-bit architectures, this operation is not atomic and
can lead to read/write tearing if a reader accesses the counter during
the update. This can result in incorrect values being reported for
dropped packets.
To prevent this potential data corruption, wrap the increment
operation with u64_stats_update_begin() and u64_stats_update_end().
This ensures that updates to the 64-bit counter are atomic, even on
32-bit systems, by using a sequence lock.
The u64_stats_sync API requires the writer to have exclusive access,
which is already provided in this context by the network stack's
serialization of the transmit path (net_device_ops::ndo_start_xmit
[1]) for a given queue.
[1]: https://www.kernel.org/doc/Documentation/networking/netdevices.txt
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By overlaying the struct gve_xdp_buff on top of the struct xdp_buff_xsk
that AF_XDP utilizes, the driver records the 32 bit timestamp via the
completion descriptor and the cached 64 bit NIC timestamp via gve_priv.
The driver's implementation of xmo_rx_timestamp extends the timestamp to
the full and up to date 64 bit timestamp and returns it to the user.
gve_rx_xsk_dqo is modified to accept a pointer to the completion
descriptor and no longer takes a buf_len explicitly as it can be pulled
out of the descriptor.
With this patch gve now supports bpf_xdp_metadata_rx_timestamp.
Signed-off-by: Tim Hostetler <thostet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251114211146.292068-5-joshwash@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Support populating XDP RX metadata with hardware RX timestamps. This
patch utilizes the same underlying logic to calculate hardware
timestamps as the regular RX path.
xdp_metadata_ops is registered with the net_device in a future patch.
gve_rx_calculate_hwtstamp was pulled out so as to not duplicate logic
between gve_xdp_rx_timestamp and gve_rx_hwtstamp.
Signed-off-by: Tim Hostetler <thostet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251114211146.292068-4-joshwash@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
RX timestamping will need to keep track of extra temporary information
per-packet. In preparation for this, introduce gve_xdp_buff to wrap the
xdp_buff. This is similar in function to stmmac_xdp_buff and
ice_xdp_buff.
Signed-off-by: Tim Hostetler <thostet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251114211146.292068-3-joshwash@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Previously, gve had been only initializing ptp aux work when
hardware timestamping was initialized through ndo_hwtsatmp_set. As this
patch series introduces XDP hardware timestamp metadata which will
require the ptp aux work, the work can't be gated on the
kernel_hwtstamp_config being set and must be initialized elsewhere.
For simplicity, ptp_schedule_worker is invoked right after the ptp_clock
is registered with the kernel (which happens during gve_probe or
following reset). The worker is scheduled in GVE_NIC_TS_SYNC_INTERVAL_MS
as the synchronous call to gve_clock_nic_ts_read makes the worker
redundant if scheduled immediately.
If gve cannot read the device clock immediately, it errors out of
gve_init_clock.
Signed-off-by: Tim Hostetler <thostet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251114211146.292068-2-joshwash@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Change the driver's default behavior to prefer the largest available RX
buffer length supported by the device for DQO format, rather than always
using the hardcoded 2K default.
Previously, the driver would initialize with
`GVE_DEFAULT_RX_BUFFER_SIZE` (2K), even if the device advertised support
for a larger length (e.g., 4K).
Performance observations:
- With LRO disabled, we observed >10% improvement in RX single stream
throughput when MTU >=2048.
- With LRO enabled, we observed >10% improvement in RX single stream
throughput when MTU >=1460.
- No regressions were observed.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251106192746.243525-5-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for getting and setting the RX buffer length via the
ethtool ring parameters (`ethtool -g`/`-G`). The driver restricts the
allowed buffer length to 2048 (SZ_2K) by default and allows 4096 (SZ_4K)
based on device options.
As XDP is only supported when the `rx_buf_len` is 2048, the driver now
enforces this in two places:
1. In `gve_xdp_set`, rejecting XDP programs if the current buffer
length is not 2048.
2. In `gve_set_rx_buf_len_config`, rejecting buffer length changes if XDP
is loaded and the new length is not 2048.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251106192746.243525-4-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Plumb extack as it allows us to send more detailed error messages back
and append 'gve' suffix to method name per convention.
NL_SET_ERR_MSG_FMT_MOD doesn't support format string longer than 80
chars so keeping netdev warning with actual queue count details.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251106192746.243525-3-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, enabling header split via `gve_set_hsplit_config` also
implicitly changed the RX buffer length to 4K (if supported by the
device). This coupled two settings that should be orthogonal; this patch
removes that side effect.
After this change, `gve_set_hsplit_config` only toggles the header
split configuration. The RX buffer length is no longer affected and
must be configured independently.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251106192746.243525-2-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec524 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c433 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c0063 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9dc ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ptp_clock_settime() assumes every ptp_clock has implemented settime64().
Stub it with -EOPNOTSUPP to prevent a NULL dereference.
Fixes: acd16380523b ("gve: Add initial PTP device support")
Reported-by: syzbot+a546141ca6d53b90aba3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a546141ca6d53b90aba3
Signed-off-by: Tim Hostetler <thostet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251029184555.3852952-3-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gve implemented a ptp_clock for sole use of do_aux_work at this time.
ptp_clock_gettime() and ptp_sys_offset() assume every ptp_clock has
implemented either gettimex64 or gettime64. Stub gettimex64 and return
-EOPNOTSUPP to prevent NULL dereferencing.
Fixes: acd16380523b ("gve: Add initial PTP device support")
Reported-by: syzbot+c8c0e7ccabd456541612@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c8c0e7ccabd456541612
Signed-off-by: Tim Hostetler <thostet@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251029184555.3852952-2-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor the ethtool ring parameter configuration logic to address two
issues: unnecessary queue resets and lost configuration changes when
the interface is down.
Previously, `gve_set_ringparam` could trigger multiple queue
destructions and recreations for a single command, as different settings
(e.g., header split, ring sizes) were applied one by one. Furthermore,
if the interface was down, any changes made via ethtool were discarded
instead of being saved for the next time the interface was brought up.
This patch centralizes the configuration logic. Individual functions
like `gve_set_hsplit_config` are modified to only validate and stage
changes in a temporary config struct.
The main `gve_set_ringparam` function now gathers all staged changes
and applies them as a single, combined configuration:
1. If the interface is up, it calls `gve_adjust_config` once.
2. If the interface is down, it saves the settings directly to the
driver's private struct, ensuring they persist and are used when
the interface is brought back up.
Signed-off-by: Ankit Garg <nktgrg@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251017012614.3631351-1-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device returns a valid bit in the LSB of the low timestamp byte in
the completion descriptor that the driver should check before
setting the SKB's hardware timestamp. If the timestamp is not valid, do not
hardware timestamp the SKB.
Cc: stable@vger.kernel.org
Fixes: b2c7aeb49056 ("gve: Implement ndo_hwtstamp_get/set for RX timestamping")
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Tim Hostetler <thostet@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20251014004740.2775957-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Declare PP_FLAG_ALLOW_UNREADABLE_NETMEM to turn on unreadable netmem
support in GVE.
We also drop any net_iov packets where header split is not enabled.
We're unable to process packets where the header landed in unreadable
netmem.
Use page_pool_dma_sync_netmem_for_cpu in lieu of
dma_sync_single_range_for_cpu to correctly handle unreadable netmem
that should not be dma-sync'd.
Disable rx_copybreak optimization if payload is unreadable netmem as
that needs access to the payload.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250818210507.3781705-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A crash can occur if an ethtool operation is invoked
after shutdown() is called.
shutdown() is invoked during system shutdown to stop DMA operations
without performing expensive deallocations. It is discouraged to
unregister the netdev in this path, so the device may still be visible
to userspace and kernel helpers.
In gve, shutdown() tears down most internal data structures. If an
ethtool operation is dispatched after shutdown(), it will dereference
freed or NULL pointers, leading to a kernel panic. While graceful
shutdown normally quiesces userspace before invoking the reboot
syscall, forced shutdowns (as observed on GCP VMs) can still trigger
this path.
Fix by calling netif_device_detach() in shutdown().
This marks the device as detached so the ethtool ioctl handler
will skip dispatching operations to the driver.
Fixes: 974365e51861 ("gve: Implement suspend/resume/shutdown")
Signed-off-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Link: https://patch.msgid.link/20250818211245.1156919-1-jeroendb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
